VarioControl LinearDrive 100/A and 100/M

Transcription

1 VarioControl LinearDrive 100A and 100 4x2 A FullColour Dimmable LED Driver LINEAdrive AC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, lowpower fullcolour static or dynamic LED lighting. LINEAdrive AC is DALI, DX D and LedSync compatible. Applications Entertainment lighting Fullcolour architectural lighting Signageadvertising lighting Cove lighting Decorative lighting Dynamic colour panel lighting Features & benefits Input Voltage: V AC Current, max: 1 A at 120 V60 Hz 0.5 A at 230 V50 Hz 0.45 A at 277 V60 Hz Frequency: 5060 Hz LINEAdrive 100A Output Voltage: 12 V DC or 24 V DC, selectable via DIP switch Current: 2.8 A absolute max rating per output Power: 100 W max 4 LED outputs and 1 common anode LINEAdrive 100 For a description of various use cases at different output voltages and loads, refer to the driver s tech sheet. General Power factor: > 0.94 DALI, DXD and LedSync compatible Hybrid HydraDrive: 15bit resolution Dimming control: smooth dimming from 100 % to 0.1%, choice of linear or logarithmic dimming curve Intuitive 3button user interface for onthefly configuration Interface for external control device: 10 k Ω potentiometer, 0 10 V source or momentary switch DIP switch for 12 V or 24 V operation VarioControl LINEAdrive 100A,

2 VarioControl LinearDrive 100A and 100 Dimensions, weight, packaging LINEAdrive 100A 354 mm mm1.18 Weight: 705 g, 26 oz ø 5.0 mm0.2 LED Linear GmbH 42 mm mm15.27 LINEAdrive 100 Weight: 880 g, 31 oz ø 5.0 mm0.2 LED Linear GmbH 361 mm mm mm mm14.57 Connections Connectors Power: Line, Neutral and Ground DALI: and (x2) DX in:, and shield LedSync out:, and shield Ext in: and Connectors (cont d) LED outputs: 4 outputs with common LEDcodeNTC: and Wiring Cross section: mm 2, AWG Strip length: 9 mm0.35 in. Other information Certifications IEC , IEC , IEC A1, EN A1, EN A1, IEC , IEC A1, IEC CE ENEC by VDE UL: ecognized Component for US and Canada (file no. E333135), according to UL1310 and UL8750. Class 2 output for US and Canada. Environmental ratings Ta range: 40 C...50 C40 F F Tc max: 90 C194 F (100A) and 85 C185 F (100) For use in damp and dry locations Control compatibility DALI control gear DX512A and D explore & address (ANSI E1.20) control gear Standard passive 0 10 V switch controls VarioControl LINEAdrive 100A,

3 VarioControl LinearDrive 100A and 100 Wiring diagram Pay attention when connecting the LED groups: polarity reversal results in no light output and often damages the LEDs N 120 VAC L 277{ LedSync out LedSync out LedSync out shield DX in shield DX in DX in Common anode 4 LED groups, 4 control channels G B W DALI{ Ext in Ext in 12 V24 V DIP switch 24 V 12 V Non functional 1 AWG mm 2 1 AWG mm mm 0.35 inch 9 mm 0.35 inch WANING: isk of electrical shock. ay result in serious injury or death. Disconnect power before servicing or installing. CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and building codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs. VarioControl LINEAdrive 100A, V AC The driver accepts a universal mains voltage input of V AC, 5060 Hz. DALI Use these s to connect the driver to a DALI network. Always combine a DA and DA for either data input or data output. DX inledsync out Use these s when the driver is used in a DX network. For DX in, connect the network cable s DX, DX and DX shielding wire (the orangewhite, orange and brown wire in a CAT5 cable) to the DX in, DX in and DX in shield respectively. For LedSync out, connect the network cable s DX, DX and DX shielding wire to the LedSync out, LedSync out and LedSync out shield respectively. LED groups Indicates the location of the s for your LED groups. (ed) represents channel 1, G(reen) represents channel 2, B(lue) represents channel 3 and W(hite) represents channel 4. One common anode provides the positive supply voltage for all four LED groups. The default group color allocation can be changed over the 3button user interface. LED wiring distance aximum wiring distance at full load: AWG value Distance (m) Distance (ft) Ext in You have the possibility to connect an external control device (0 10 V control device, 10 k Ω potentiometer or show selection switch) to the driver s Ext in and Ext in s. Configure the driver for use with an external control device over the 3button user interface V DIP switch Set DIP switch 1 to ON when you re connecting a 24 V LED strip; set DIP switch 1 to OFF when you re connecting a 12 V LED strip. (DIP switch 2 is not used.) Warning: setting DIP switch 1 to ON for use with 24 V LEDs and subsequently connecting 12 V LEDs can damage the LEDs!

4 VarioControl LinearDrive 100A and 100 Wiring diagram Connecting an GB LED strip aximum current per output at 12 V: 2.77 A aximum current per output at 24 V: 1.33 A Press and simultaneously, in save by pressing. G B GB LED strip Connecting an GB strip and a white LED strip aximum current per output at 12 V: 2 A aximum current per output at 24 V: 1 A Press and simultaneously, in the LED menu choose GBW and save by pressing. G B GB LED strip Connecting warm white and cool white LED strips aximum current per output at 12 V: 2 A aximum current per output at 24 V: 1 A Press and simultaneously, in the LED menu choose 4 4 L and save by pressing. Warm white LED strip Cool white LED strip Warm white LED strip Cool white LED strip VarioControl LINEAdrive 100A, Connecting four white or selfcolored LED strips aximum current per output at 12 V: 2 A aximum current per output at 24 V: 1 A Press and simultaneously, in the LED menu choose 1 4 L and save by pressing.

5 1. Select mode of operation Locking the configuration (5 sec) (5 sec) Set mode ODE SET COL SHOW DX DALI Lock driver LOCK SOFT HAD 2. Set LED groups LED groups LED External input EXT INP Dimming curve DI CUV VarioControl LinearDrive 100A and 100 Quick Start Guide 11L GB 22L GBW 33L GBA 44L GB 24L GGB 14L CCWW CWWW OFF POT 10V SWIT LOG LIN Visual test run Test TEST 1 sec G 1 sec B 1 sec W 1 sec GBW 1 sec 1 sec G 1 sec B 1 sec W 1 sec GBW 1 sec 3. Standalone Standalone Networked operation or operation or operation Colour* Show DX or DALI eset to factory defaults (5 sec) Hue HUE White WHIT Show SHOW Speed SPD DX address DX Network resolution NETW ES BT 16 BT No address Address set SET eset E SET PES ENU Press menu VarioControl LINEAdrive 100A, Intensity INT Intensity INT * The colour menu depends on the LED group settings you have selected in step DX termination TE Network setup NETW SET Interpolation INTEPOL YES AUTO ANU OFF VID COL WHIT GLOW Nr. of ballasts X BAL