VarioControl LINEARdrive 180D

Transcription

1 VarioControl LINEAdrive 180D 4624 A FullColour Dimmable LED Driver LINEAdrive DC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, lowpower fullcolour static or dynamic LED lighting. LINEAdrive DC is DALI, DX D and LedSync compatible. Applications Entertainment lighting Fullcolour architectural lighting Signageadvertising lighting Cove lighting Decorative lighting Dynamic colour panel lighting Features & benefits Input Voltage: VDC Current, max: 6 A, irrespective of PSU voltage LINEAdrive 180D Output Voltage: 5 V, 12 V or 24 V ax load per output: 24 V 24 V LINEAdrive 180D 1.5 A 2 A General USITT DX512AD (ANSI E1.20) and LedSync compatible HydraDrive: 15bit resolution Dimming control: smooth dimming from 100 % to 0.1 %, gammacorrected curve Intuitive 3button user interface for onthefly configuration Interface for external control device: 10 kω potentiometer, 0 10 V source or momentary switch VarioControl LINEAdrive 180D

2 Datasheet LINEAdrive 180D Dimensions, weight, packaging LINEAdrive 180D Weight: 120 g, 4.2 oz 110 mm4.33 ø 4.2 mm mm mm mm0.39 LED supply 30 mm mm0.39 DX in DX in Ext in Ext in DX in shield LedSync thru LedSync thru LINEAdrive 180D V6A Direct voltage controlled LED driver 50 mm mm6.02 VarioControl LINEAdrive 180D Connections Connectors LINEAdrive 180D VDC: and DX in:, and shield LedSync thru:, and shield Ext in: and LED outputs: 4 outputs with common Wiring Cross section: mm 2, AWG Strip length: 9 mm0.35 in. Other information Certifications CE IEC 61347, EN 55015, IEC 61003, EN UL: UL ecognized Component (file no. E333135) Environmental ratings Ta range: 20 C...50 C4 F F Tc max: 65 C149 F For use in dry locations Control compatibility DX512 A and D explore & address (ANSI E1.20) control gear Standard 0 10 V switch controls

3 { ax Vdc 32V Vdc LED supply DX in DX in VarioControl LINEAdrive 180D VarioControl LinearDrive 180D Wiring diagram V DC IN VDC and LED s: 1 AWG mm Other s: AWG mm 2 2 G B W Ext in Ext in 9 mm 0.35 inch 9 mm 0.35 inch DX in DX in DX in shield LedSync thru LedSync thru Ext in Ext in DX in shield LedSync thru LedSync thru LINEAdrive 180D 1228V 6A Direct voltage controlled LED driver CAUTION: The device may only be connected and installed by a qualified electrician. All applicable regulations, legislation and building codes must be observed. Incorrect installation of the device can cause irreparable damage to the device and the connected LEDs. 12 V 28 V DC IN To connect the driver to a DC power supply unit (PSU), connect the PSU s positive voltage supply wire to the VDC and the PSU s negative voltage supply wire to the VDC. EXT in You have the possibility to connect an external control device (0 10 V control device, 10 kω potentiometer or show selection switch) to the driver s Ext in and Ext in. Configure the driver for use with an external control device over the 3button user interface. DX inledsync thru Use these s when the driver is used in a DX network. For DX in, connect the network cable s data, data and shielding wire (the orangewhite, orange and brown wire in a CAT5 cable) to the DX in, DX in and DX in shield respectively. For LedSync thru, connect the network cable s data, dataand shielding wire (the orangewhite, orange and brown wire in a CAT5 cable) to the LedSync thru, LedSync thru and respectively. Indicates the location of the s for your. (ed) represents channel 1, G(reen) represents channel 2, B(lue) represents channel 3 and W(hite) represents channel 4. The default group color allocation can be changed over the 3button user interface.

4 VarioControl LinearDrive 180D Wiring diagram Connecting an GB LED strip aximum current per output at 12 V: 2 A aximum current per output at 24 V: 2 A LED supply GB LED strip G B Press and simultaneously, in the LED menu choose GB and save this setting by pressing. Connecting an GB strip and a white LED strip aximum current per output at 12 V: 1.5 A aximum current per output at 24 V: 1.5 A GB LED strip G LED supply B Press and simultaneously, in the LED menu choose GBW and save this setting by pressing. Connecting warm white and cool white LED strips Warm white LED strip aximum current per output at 12 V: 1.5 A aximum current per output at 24 V: 1.5 A Cool white LED strip Press and simultaneously, in the LED menu choose 4 4 L and save this setting by pressing. LED supply Warm white LED strip Cool white LED strip Connecting four white or selfcolored LED strips aximum current per output at 12 V: 1.5 A aximum current per output at 24 V: 1.5 A VarioControl LINEAdrive 180D Press and simultaneously, in the LED menu choose 1 4 L and save this setting by pressing. LED supply

5 VarioControl LinearDrive 180D Quick Start Guide 1. Select mode of operation Locking the configuration (5 sec) (5 sec) Set mode ODE SET COL SHOW DX DALI Lock driver LOCK NO SOFT HAD 2. Set LED External input EXT INP Dimming curve DI CUV 11L GB 22L GBW 33L GBA 44L GB 24L GGB 14L CCWW CWWW OFF POT 10V SWIT LOG LIN Visual test run Test TEST 1 sec G 1 sec B 1 sec W 1 sec GBW 1 sec 1 sec G 1 sec B 1 sec W 1 sec GBW 1 sec 3. Standalone Standalone Networked operation or operation or operation Colour* Show DX or DALI Hue HUE White WHIT Intensity INT Show SHOW Speed SPD Intensity INT DX address DX Network resolution NETW ADD ES DX termination TE Network setup NETW SET BT 16 BT YES NO AUTO ANU No address Address set NO ADD ADD SET Nr. of ballasts X BAL eset to factory defaults eset E SET PES ENU Press menu (5 sec) VarioControl LINEAdrive 180D * The colour menu depends on the LED group settings you have selected in step 2. Interpolation INTEPOL OFF VID COL WHIT GLOW