Module clips. Certified by First Solar and Calyxo

Transcription

1 Module clips Certified by First Solar and Calyxo 1

2 Welcome to the world of clever solutions

3 Fastenings for every module In our production areas we produce all needed components for the sub construction of your solar system. The right module clip plays an important role. Framed or frameless module? Thin-film or crystalline photovoltaic module? The question concerning the module clip is often asked at the end of a project. To us, it is one of the most important questions! A secure hold is one of the most important issues for your solar system. We offer you high quality with fair pricing. Our module clips are certified and, permanently tested and, work for all kinds of modules. Whether you need clips in aluminum or stainless steel, whether for framed or frameless modules, whether you need middle or end clips we offer you the suitable module clip! Our module clip fits seamlessly to the photovoltaic mounting structure of Jurchen Technology and other commercially available standard solutions. Certified by First Solar and Calyxo. And if you re not sure, which module clip is the best for you? Even in this case, it would be a pleasure for us to help you and give you a qualified advice on site. 3

4

5 Module middle clips for frameless modules Key data Patented design with an EPDM rubber for a secure hold of the solar modules Light-weight clips with best static characteristics Practical end stop to prevent module strains Completely pre-assembled Optional anti-theft system Also available anodised in all colours Certified by First Solar and Calyxo Proven millionfold used under extreme conditions worldwide Our MK-A 70 design results from a close longterm collaboration with renowned European contractors both for ground-mounts as well as roof-systems. The MK-A 70 module clip fits seamlessly to the photovoltaic mounting structure of Jurchen Technology and other commercially available standard solutions. This advanced system design ensures a secure hold of the PV module. The superior concept of the MK-A 70 design brings benefit starting with installation: The 6.8 mm laminates can be installed safely due to the extended lower rubber lip (see image 1 ). The central connection point (customised for different screws) and the protection bar below (see image 2 ) help avoid too high tightening torques during installation. Above that the PV system performance is guaranteed by shade-free screw connection. In the last years the Jurchen Technology MK-A 70 module clip has been installed many million times in photovoltaic arrays throughout Europe. The cleverly devised and patended concept has proven its strength. Installation of a MK-A C M: The use as an edge clip is possible without additional components The extended lower EPDM rubber lip guarantees an easy and secure installation. Practical protection bar to avoid extreme torsional moments. 5

6

7 Module end clips for frameless modules Key data Patented design with EPDM- nlay for a secure hold of the L weight module clip the static modules Practical security bar to prevent module strains Completely pre-assembled Optional anti-theft Also available anodised in all colours Certified by First Solar and Calyxo Technical Data Applicable First Solar module series 2 and 3 Calyxo module series CX Abound Solar modul series AB 1 Aluminum, weather-proof EPDM, UV-resistant and weather-proof Shore hardness 60 Shore A ± 5 in area of the glass hanging Minimum support area 40 mm Optional anti-theft Yes Expanded center bar for load distribution Yes Module clip MK-A C E MK-A 70-9 E MK-A 70-7 E Available lengths of the end clip 70 mm 70 mm Diameter Ø applicable for M8 M6 7

8

9 Module middle clips for framed modules MKG M middle mounting clip Quick assembly Secure hold Cost-efficient solution Counter bored to fit DIN 7991 Dispatch possible for all common modules and frame sizes from 34 to 50 mm Technical data Applicable for Applicable for frame sizes Base material Optional anti-theft system Length Diameter applicable for Countersinking Ø 9 in middle mounting clip All common manufacturers of framed modules Universal, depending on length of bolt Aluminum Yes 70 mm M8 For DIN 7991 M8 Module center clip JT-MKG III Grounding claw integrated Quick assembly Secure hold Cost-efficient solution Available for all common modules Technical data Applicable for Applicable for frame sizes Base material Optional anti-theft syste Length Diameter applicable for Pre-assembled available All common manufacturers of framed modules Universal, depending on length of bolt Stainless steel Yes 70 mm M8 Yes 9

10

11 Module end clips for framed modules MKG E end mounting clip Quick assembly Secure hold 9 mm bore for DIN 912 M8 Length 70 mm Also available anodised in all colours Available for all common modules and frame sizes from 34 to 50 mm Technical data Applicable for Applicable for frame sizes Base material Optional anti-theft system Length Diameter applicable for All common manufacturers of framed modules mm Aluminum, weather-proof Yes 70 mm M8 MKG E end mounting clip stainless steel Quick assembly Secure hold 9 mm bore for DIN 912 M8 Length 70 mm Available for all common modules and frame sizes from 34 to 50 mm Technical data Applicable for Applicable for frame sizes Base material Optional anti-theft system Length Diameter applicable for All common manufacturers of framed modules mm Stainless steel, weather-proof Yes 70 mm M8 11

12 Together we generate clever solutions for your corporate success Feel free to contact us! Jurchen Technology GmbH Steigweg Kitzingen Germany Tel.: +49 (0) 9321 / All data may be subject to alterations and errors. 2013_0605_EN