2 ROW WITH A WHITEBOARD LUMINAIRE

Size: px

Start display at page:

Download "2 ROW WITH A WHITEBOARD LUMINAIRE"

Bonnie Hodges
5 years ago
Views:

1 To Fixture - To Fixture - 2 WITH A WHITEBOARD LUMAIRE The luminaires in this configuration do not exceed 20 amps. This configuration includes two luminaire rows lighting the primary classroom space, plus an additional whiteboard luminaire positioned at the front of the classroom to light the whiteboard. The row switches are configured to turn the luminaire rows on independently. The whiteboard luminaire is controlled by the Teacher Control Center at the front of the classroom. The occupancy sensor(s) controls all luminaires.

2 To Fixture - To Fixture - 2 WITH NO WHITEBOARD LUMAIRE The luminaires in this configuration do not exceed 20 amps. There are two luminaire rows that are independently switched using row switches at the main room entrance. The occupancy sensor(s) controls all luminaires.

3 Standard 3 Row ICLS with Whiteboard Wiring Detail LE Optional To Fixture 0-10V White Board WHITE BOARD not used - R H T 120 V W - ED Junction Box By Others White Board TCC with Whiteboard A/V Mode Dim. A/V Mode A/V Mode TCC w/whiteboard & (optional) To Whiteboard To Fixture - Row 3 ing Use 3 WITH A WHITEBOARD LUMAIRE The luminaires in this configuration do not exceed 20 amps. This configuration includes three luminaire rows lighting the primary classroom space, plus an additional whiteboard luminaire positioned at the front of the classroom to light the whiteboard. The row switches are configured to turn the luminaire rows on independently. The whiteboard luminaire is controlled by the Teacher Control Center at the front of the classroom. The occupancy sensor(s) controls all luminaires.

4 Standard 3 Row ICLS Wiring Detail LE - 120V - Junction Box By Others TCC-Standard TCC- (optional) To Fixture - Row 3 ing Use 3 WITH NO WHITEBOARD LUMAIRE The luminaires in this configuration do not exceed 20 amps. There are three luminaire rows that are independently switched using row switches at the main room entrance. The occupancy sensor(s) controls all luminaires.

5 Standard 4 Row ICLS Wiring Detail with Whiteboard Detail LE WHITE BOARD To Whiteboard NOT USED - 120V - Junction Box By Others Row 3 Row 4 Row pack input voltage rating MUST BE the same as the LE voltage. TCC-Standard TCC- (optional) ing Use 4 WITH A WHITEBOARD LUMAIRE The luminaires in this configuration do not exceed 20 amps. This configuration includes four luminaire rows lighting the primary classroom space, plus an additional whiteboard luminaire positioned at the front of the classroom to light the whiteboard. The row switches are configured to turn the luminaire rows on independently. The whiteboard luminaire is controlled by the Teacher Control Center at the front of the classroom. The occupancy sensor(s) controls all luminaires.

6 Standard 4 Row ICLS Wiring Detail LE V W R R ED E H D T - Junction Box By Others TCC-Standard TCC- (optional) Row pack input voltage rating MUST BE the same as the LE voltage. ing Use Row 3 Row 4 4 WITH NO WHITEBOARD LUMAIRE The luminaires in this configuration do not exceed 20 amps. There are four luminaire rows that are independently switched using row switches at the main room entrance. The occupancy sensor(s) controls all luminaires.

7 Finelite, Inc Whipple Road Union City, CA / FAX: 510 / Better Lighting For A Better Workplace FELITE MULTIPLE FIXTURES OR MULTIPLE The luminaires in these configurations exceed 20 amps, requiring more than one 20-amp branch circuit. Shown here is a 5-row configuration, but the same logic can be applied to other configurations. One 20A Branch Circuit 3 Row ICLS Wiring Detail 2 Row ICLS Wiring Detail LE Junction Box By Others V W R ED H T Row 3 ing Use To Fixture - To Fixture -

ICLS Installation Guidelines

ICLS Installation Guidelines 6 1 1 2 Control Pack / Row Pack 1 2 / Install these components in a easily accessible place near the main input power for the room. The default location is near the main room