IECEx Certificate of Conformity
|
|
- Roderick Robbins
- 5 years ago
- Views:
Transcription
1 Annex Page 1 of 9 Details associated with Issue 2 Changes: Change in ambient range to include the upper limit of +65 C for Junction Boxes fitted with Terminal blocks series UK N (IECEx KEM U). Re-evaluation of Models EP/DP4237 and EP/DP6042 for applications involving low risk of mechanical impact. Addition of model EP/DP4227, for applications involving low risk of mechanical impact. Operation heads (IECEx CQM U) and Switches (IECEx CQM U) can now be used. Change in IP rating from IP65 to IP66 when fitted with Operation Heads (operators). Drawing numbers GC0325, GC0327, GC0333 (sheets 2 and 3), GC0353 (sheets 2 and 3) have been removed. Clarification on IP rating for Issues 0 and 1 of this Annex. Conditions of certification: Limiting parameters and temperature classification are listed below. Table 1: Maximum Power Dissipation and Temperature Classification (Applies to - Junction Boxes fitted with Terminal Block series UK N (IECEx KEM U)) Maximum power dissipation (W) (-20 C Ta +65 C) T6 / T80 C T5 / T95 C EP/DP EP/DP EP/DP EP/DP EP/DP Table 2: EP/DP4227 Series Maximum Power Dissipation and Temperature Classification Maximum power dissipation (W) Configuration -20 C Ta +40 C Other than AWAM2 Ammeter, Fuse Type 8560/.. & window option With AWAM2 Ammeter or Fuse Type 8560/.. (for DP 4227) or window option Certificate numbers for Field bus barriers, Megablock IS terminals, Segment protectors and Ammeter Type AWAM2 are listed in this certificate. T6 / T80 C T5 / T95 C T6 / T80 C T5 / T95 C Field bus barriers, Megablock or Segment protectors N/A N/A
2 Annex Page 2 of 9 Table 3: EP4227 Range Maximum Current and Temperature Classification T5 (-20 C Tamb +40 C) Maximum current (A) T4 (-20 C Tamb +40 C) EP Range with Fuse Type 8560/ A short circuit protection device, rated at not greater than 10A, must be fitted in series with the Ammeter Type AWAM2. The equipment was submitted to tests corresponding to the low risk of mechanical impact and this must be observed at installation. The square polycarbonate window, when fitted in the enclosures, may generate an ignitioncapable level of electrostatic charge under certain extreme conditions. The user must ensure that the equipment is installed and used in accordance with the manufacturer's instruction manual. Marking details: DP Range of Junction Boxes: Ex td A21 T 1 C IP** -20 C Ta +65 C DP4227 Series Control Stations: Ex td A21 T 2 C IP** EP Range of Junction Boxes: Ex e II T 1 IP** -20 C Ta +65 C EP4227 Range of Control Stations: Ex # T 3 IP** Notes: T 1 - refer Table 1 T 2 - refer Table 2 T 3 - refer Tables 2 and 3 # - refer Table 4 Ambient temperature range marked for extended range only.
3 Annex Page 3 of 9 IP** IP65 for EP/DP4237, EP/DP6042 and models fitted with separately certified Ex de IP65 Operators listed in this certificate. IP66 for applications involving low risk of mechanical impact and when fitted with the separately certified Operation Heads listed in this certificate. IP66 (EP/DP Series Junction Boxes) for applications involving low risk of mechanical impact. No IP rating marked for equipment fitted with separately certified Ex dem and Ex de Indicating lights listed in the certificate. IP65 for enclosures fitted with separately certified Operation Heads listed in this certificate. This is an optional marking. Note: For Control Stations, the IP rating applies if the fitted devices have at least the same IP rating. Table 4: Marking information for EP Range when fitted with separately certified devices Device Operation Head Switches Meters Indicator lights Fuse Marking e IIC de IIC e II de IIC or dem IIC em II Manufacturer s documents: Drawing No Subject Rev. Date GC0324 GC0326 GC0331 GC0333 Ex e II T* IP66 Ex td IP66 T* o C JUNCTION BOX & CONTROL STATION Cat No EP1511 AND DP1511 Ex e II T* IP66 Ex td II T* IP66 JUNCTION BOX & CONTROL STATION Cat No: EP2315 AND DP2315 Ex e II Ex td T* IP6* EP4227 & DP4227 JUNCTION BOX / CONTROL STATION Ex e II Ex td T* IP6* EP6042 & DP6042 JUNCTION BOX / CONTROL STATION Drawing list continued next page 2 25/10/ /10/ /10/10
4 Annex Page 4 of 9 Drawing No Subject Rev. Date GC0353 GC0355 Sheet 1 of 3 GC0355 Sheet 2 of 3 GC0355 Sheet 3 of 3 GC0359 EPDPGMI Ex e II Ex td T* IP6* EP4237 & DP4237 JUNCTION BOX / CONTROL STATION Ex de II Ex td T* IP6* EP**** & DP**** CONTROL STATION Ex de II Ex td T* IP6* EP**** & DP**** CONTROL STATION Ex de II Ex td T* IP6* EP**** & DP**** CONTROL STATION Ex eim II Ex td T* IP66/65 GRP ENCLOSURE EP**** & DP**** JUNCTION BOX & CONTROL STATION CONNECTION BLOCKS FIELD BUS BARRIER FIELD BUS SYSTEMS GENERAL INSTRUCTION & MAINTENANCE INSTRUCTIONS 2 25/10/ /10/10
5 Annex Page 5 of 9 Details associated with Issue 1 Changes: Option for use of the following in the enclosure: Megablock Series IS terminals (IECEx CSA X) Segment protector type R-SP-E*** (IECEx PTB X) Field bus barrier (IECEx PTB ) Note: Changes apply to the models listed in Table 5. Conditions of certification: The maximum allowable power dissipation assigned in Table 5 applies when fitted with the separately certified Field bus barriers, Megablock IS terminals or Segment protectors in order to limit the maximum internal ambient temperature of the enclosure to 70 C. Table 5: Maximum Power Dissipation (W) Maximum power dissipation (W) T4 / T80 C (-20 C Ta +40 C) T4 / T80 C () EP/DP EP/DP EP/DP EP/DP Marking details: DP Range of Junction Boxes and Control Stations: Ex td A21 T80 C IP** EP Range of Junction Boxes and Control Stations: Ex # T4 IP** Notes: Ambient temperature range marked for extended range only. ** IP65 for EP/DP4237 & EP/DP6042 IP66 for EP/DP1511 & EP/DP2315 IP65 for enclosures fitted with Ex de Pushbuttons and Switch operators, refer Issue 0 of the certificate. Note: For Control Stations, the IP rating applies if the fitted devices have at least the same IP rating.
6 Annex Page 6 of 9 # As per Table 6 when fitted with separately certified devices: Table 6: Marking information for EP Range when fitted with separately certified devices Device Field bus barriers (IECEx PTB ) Megablock IS terminals (IECEx CSA X) Segment protectors (IECEx PTB X) Marking me [ia] IIC e ia IIC me II Manufacturer s documents: Drawing No Subject Rev. Date GC0359 EPDPGMI Ex eim II Ex td T* IP66/65 GRP ENCLOSURE EP**** & DP**** JUNCTION BOX & CONTROL STATION CONNECTION BLOCKS FIELD BUS BARRIER FIELDBUS SYSTEMS GENERAL INSTALLATION & MAINTENANCE INSTRUCTIONS /11/09
7 Annex Page 7 of 9 Details associated with Issue 0 Conditions of Certification: Limiting parameters and temperature classification are listed in Tables 7, 8 and 9. Table 7: EP/DP Range Maximum Power Dissipation and Temperature Classification Maximum allowable power dissipation (W) -20 C Ta +40 C T6 / T80 C T5 / T95 C T6 / T80 C T5 / T95 C EP/DP EP/DP EP/DP EP/DP Table 8: EP Range Maximum Current and Temperature Classification T5 (-20 C Tamb +40 C) Maximum current (A) T4 (-20 C Tamb +40 C) EP Range with Fuse Type 8560/ The following limiting parameters apply when the equipment is fitted with the window option and/or Ammeter Type AWAM2 (IECEx BAS U): A short circuit protection device, rated at not greater than 10A, must be fitted in series with the Ammeter. The maximum power dissipation of the equipment listed in Table 9 must not be exceeded Table 9: Maximum Power Dissipation for equipment fitted with Ammeter Type AWAM2 and/or window Maximum power dissipation (W) (-20 C Ta +40 C) () T6 / T80 C T5 / T95 C T6 / T80 C T5 / T95 C EP/DP EP/DP EP/DP EP/DP
8 Annex Page 8 of 9 The EP/DP1511 & EP/DP2315 models were submitted to tests corresponding to the low risk of mechanical danger and this must be observed at installation. The square polycarbonate window, when fitted in the enclosures, may generate an ignitioncapable level of electrostatic charge under certain extreme conditions. The user must ensure that the equipment is installed and used in accordance with the manufacturer's instruction manual. Marking details: DP Range of Junction Boxes and Control Stations: Ex td A21 T* C IP** EP Range of Junction Boxes: Ex e II T* IP** EP Range of Control Stations: Ex # T* IP** Notes: T* - refer Table 7, 8 (EP Range only) and 9 Ambient temperature range marked for extended range only. ** IP65 for EP/DP4237 & EP/DP6042 IP66 for EP/DP1511 & EP/DP2315 IP65 for enclosures fitted with separately certified Ex de Pushbuttons and Switch operators Note: For Control Stations, the IP rating applies if the fitted devices have at least the same IP rating. # As per Table 10 when fitted with separately certified devices with marking as shown: Table 10: Marking information for EP Range when fitted with separately certified devices Device Pushbutton Switches Meters Indicator lights Fuse Marking de IIC de IIC e II de IIC or dem IIC em II
9 Annex Page 9 of 9 Manufacturer s documents: Drawing No Subject Rev. Date GC0324 GC0325 GC0326 GC0327 GC0333 Sheet 1 of 3 GC0333 Sheet 2 of 3 GC0333 Sheet 3 of 3 GC0353 Sheet 1 of 3 GC0353 Sheet 2 of 3 GC0353 Sheet 3 of 3 GC0355 Sheets 1 & 2 of 2 GC0290 Sheet 4 of 4 Ex e II T* IP66 Ex td IP66 T80 o C JUNCTION BOX Cat No EP1511 AND DP1511 Ex e II T* IP65 Ex td IP66 T80 o C CONTROL STATION Cat No EP1511 AND DP1511 Ex e IIC Ex td T6 IP66 JUNCTION BOX Cat No: EP2315 AND DP2315 Ex e II Ex td T6 IP65 CONTROL STATION ARRANGEMENT DETAIL CAT No EP2315 AND DP2315 Ex e II Ex td T* IP65 EP6042 & DP6042 JUNCTION BOX Ex de II Ex td T* IP65 EP6042 & DP6042 CONTROL STATION Ex e II Ex td T* IP65 EP6042 & DP6042 JUNCTION BOX DETAILS Ex e II Ex td T* IP65 EP4237 & DP4237 JUNCTION BOX Ex de II Ex td T* IP65 EP4237 & DP4237 CONTROL STATION Ex e II Ex td T* IP65 EP4237 & DP4237 JUNCTION BOX DETAILS Ex de II Ex td T* IP65 EP**** & DP**** CONTROL STATION Ex de IIC IP6* SWITCHES & VIEWING WINDOW CONTROL STATION OPERATORS EPDPGMI EP-DP / Ex e & Ex td GC0285 Sheet 2 of 2 Ex e & Ex td IP6* SQUARE WINDOW DETAILS FOR EP/DP2315, EP/DP4237 & EP/DP6042 RANGE ES/DS2315, ES/DS3030,ES/DS4050, ES/DS5060, ES/DS6090 RANGE 0 16/02/09
I Ex-Installation switch I
I Ex-Installation switch I Switch/Pushbutton Technical data 4 Ex-installation switch and Ex-pushbuttons Marking accd. to 94/9/EC II 2 G Ex de IIC T6 / II 2 D Ex td A21 IP66 T80 C EC-Type Examination Certificate
More informationMANUAL Surge Protectors
PROCESS AUTOMATION MANUAL Surge Protectors DP-LBF-I1.36.DE and DP-LBF- I1.36.IE With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery
More informationSafety Instructions Cerabar M PMC51, PMP51, PMP55
XA00470P-B/00/EN/14.13 71224652 Products Solutions Services Safety Instructions PMC51, PMP51, PMP55 4-20 ma HART, PROFIBUS PA, FOUNDATION Fieldbus Ex ia IIC T6...T4 Ga/Gb Ex ia IIC T6...T3 Ga/Gb IECEx
More informationJunction Boxes & Enclosures JBEA and ECEA Series: Aluminum Enclosures Increased Safety
PCe Type CAe Type Compliance Data: ATEX - IEC: ATEX IEC CE Ex ia IIC; Ex ib IIC T6 to T2 Ex td A21 T0 C to T290 C Ex de IIC Operating Temperatures: -40 C to +55 C (CAe) -55 C to +60 C (PCe) 223 ATX Product
More informationCerabar S PMC71, PMP71, PMP ma HART, PROFIBUS PA, FOUNDATION Fieldbus
Safety Instructions PMC71, PMP71, PMP75 4-20 ma HART, PROFIBUS PA, FOUNDATION Fieldbus Ex ia IIC T6 Ga/Gb IECEx KEM06.0011 0 XA00696P-D Safety instructions for electrical apparatus for explosion-hazardous
More informationSeries Panel Mounted Control Devices
E_Master2012.qxd:NEW_E_Master_temp.qxd 1/27/12 4:28 PM Page 1 Series Features: Suitable for hazardous and corrosive locations. Installation is easy and precise. Devices fit into a standard 30.5mm, 1.2"
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:3 Status: Current Date of Issue: 2012-10-12
More informationATX JBEA and ECEA Series Aluminum Enclosures Increased Safety
Applications Designed for use in Zone 1 or 2 areas where flammable gases or vapors are present either continuously or intermittently. Ideal for use in wet or corrosive atmospheres. Petroleum, chemical,
More informationTechnical Datasheet. Connectors, Plugs & Sockets. Table of Contents. Selection Guide 2. 16A Range (ELCX ) 3. 32A Range (ELCX
Connectors, Plugs & s Technical Datasheet Table of Contents Selection Guide 2 16A Range (ELCX 0251..) 3 32A Range (ELCX 0252..) 5 63A Range (ELCX 0253..) 7 125A Range (ELCX 0254..) 9 Elecex Ltd, Unit 9,
More informationTerminal Boxes Series 8118
> Enclosure made of glass fibre reinforced polyester resin > sizes available > Terminals and cable glands fitted to order > Enclosure design with integrated metal bracket for metal cable glands. > Degree
More informationThe Solid-State Decoupler (SSD)
The Solid-State Decoupler (SSD) Installation Instructions Introduction The Solid-State Decoupler (SSD) is a solid-state DC isolation/ac grounding (i.e., coupling) device design ed for use in conjunction
More informationOperating instructions (Safety-related part ATEX and IECEx) Inductive NAMUR sensors NN504A NN505A NN506A NN507A /00 08/2015
Operating instructions (Safety-related part ATEX and IECEx) Inductive NAMUR sensors NN504A NN505A NN506A NN507A 80013497/00 08/015 Remarks for safe use in hazardous areas Functions and features Use in
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:2 Status: Current Certificate history:
More informationJunction Boxes & Enclosures JBEP and ECEP Series: Undrilled Fiberglass Reinforced Polyester Enclosures Increased Safety
CSPe Type Small Version CAe Type Non-Hinged Version CAe Type Hinged Versions Compliance Data: ATEX - IECEx: Zone 1 & 1 & ATEX II GD IECEx CE Ex e II T6 to T Ex td A1 T75 C to T95 C Ex ia IIC; Ex ib IIC
More informationTechnical Data. General specifications Switching element function PNP NO/NC Rated operating distance s n 5 mm
Model Number Features 5 mm flush ATEX-approval for zone and zone Accessories BF 8 Mounting flange, 8 mm EXG-8 Quick mounting bracket with dead stop Technical Data specifications Switching element function
More informationtechnical datasheet technical datasheet 9370-FB Series Fieldbus Barrier Enclosures, 6 or 12 spur
technical datasheet technical datasheet 9370-FB Series Fieldbus Barrier Enclosures, 6 or 12 spur For Foundation fieldbus networks in hazardous areas Complete enclosure systems for 6 or 12 intrinsically
More informationSafety instructions. IECEx TUN Ex ia IIC T6 Gb
Safety instructions ÜSB62-36G.C_* and ÜSB62-30W.C_* IECEx TUN 07.0002 Ex [ia Ga] IIC T6 Gb Ex ia IIC T6 Gb 0044 39878 Content 1 Area of applicability 3 2 General 3 3 Electrical data 3 3.1 Application conditions
More informationSales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - P O W E R C I R C U I T B R E A K E R S Up to 630 A CEAG power circuit breakers enable making or breaking of circuits under normal operating conditions as well as cutting in, briefly conducting and
More informationControl Buttons / Switches for Panel Mounting Series 8003
www.stahl.de > Different actuators pushbutton mushroom pushbutton mushroom stay-put button mushroom stay-put button with key lock key-operated button key-operated switch selector switch > 2 contact elements
More information4 Remote I/O. Analog Output Module HART Ex i / I.S. Outputs, 8 Channels Series 9466/12
0 4 Remote I/O 8 channels for controlling HART control valves and positioners Intrinsically safe outputs Ex ia IIC Galvanic isolation between outputs and system Open-circuit and short-circuit monitoring
More informationCradle relay AC. Electrical data Operating data (coil circuit) U N. Explosion protection Marking ATEX. II 2G Ex db e IIC Gb I M2 Ex db e I Mb I N
Cradle relay AC Cradle relay for alternating voltage, neutral, monostable. High-quality cradle relays for AC are installed as encapsulated flameproof elements in the MODEX enclosure. The IP 66 protection
More informationMINI MCR-SL-UI-2I. Configurable signal duplicator. Data sheet. 1 Description
Configurable signal duplicator Data sheet 102382_en_03 PHOENIX CONTACT 2012-05-02 1 Description The MINI MCR-SL-UI-2I(-SP)(-NC) configurable signal duplicator is used to electrically isolate, condition,
More informationINSTALLATION TECHNOLOGY MADE EASY
INSTALLATION TECHNOLOGY MADE EASY Pre-assembled branching/terminal boxes for Zone 1 and Zone 21 Each user can enjoy the benefits of the exlink with the pre-assembled branching boxes without having to first
More informationICF-1150 Series Quick Installation Guide
ICF-1150 Series Quick Installation Guide Fifth Edition, July 2015 2015 Moxa Inc. All rights reserved. P/N: 1802011500014 1802011500014 Overview Introduction ICF-1150 series fiber converters have a multi-interface
More informationTechnical Data. General specifications. Output type Rated operating distance s n 8 mm
Model Number Features Increased operating distance 8 mm flush ATEX-approval for zone 2 and zone 22 Accessories BF 18 Mounting flange, 18 mm EXG-18 Quick mounting bracket with dead stop Technical Data specifications
More informationZener Barriers Bulletin 937Z
Technical Data Zener Barriers Bulletin 937Z Topic Page Introduction 2 Mounting 2 Housing 3 Operating Principle 3 Specifications 6 Introduction Allen-Bradley Zener barriers are a cost-effective solution
More informationFieldIT Multi Barrier NMB204/NMB204-EX (MB 204/MB 204-Ex)
Data Sheet FieldIT Multi Barrier NMB204/NMB204-EX (MB 204/MB 204-Ex) Intrinsically safe power supply of up to 31 stations on the bus cascadable multi barrier Intrinsically safe connection of up to 4 field
More informationM E M O R A N D U M I.S.
Physikalisch-Technische Bundesanstalt Department 3.6 " Intrinsic safety and Safety of Systems" 38023 Braunschweig Germany P.O. Box 33 45 Tel. ++49 531 592-3630 Fax ++49 531 592-3605 M E M O R A N D U M
More informationDeltaV Bulk Power Supplies
DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A, 10A, 20 A, 40 A Bulk Power Supplies. DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to
More informationRefer to attachment for more details. Andreas Meyer
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationTechnical Data. Dimensions
Model Number Features 50 mm flush -wire DC S Technical Data specifications Switching function Normally open (NO) Output type PNP Rated operating distance s n 50 mm Installation flush Output polarity DC
More informationMINI MCR-SL-RPS-I-I. Repeater power supply, active. Data sheet. 1 Description
Repeater power supply, active Data sheet 09_en_0 PHOENIX CONTACT 0--0 Description The. mm wide... repeater power supply supplies transmitters in the field and electrically isolates the input signal from
More informationABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. WirelessHART components Gateway and accessories
ABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET WirelessHART components Gateway and accessories 2 Measurement made easy The ABB offering on WirelessHART accessories connect wireless sensors to the automation
More informationINSTRUCTION MANUAL. Universal AC Input Switching Power Supply 24 Vdc Output DIN-Rail Models PSD1000, PSD1000F PSD PSD1000F
PSD1000 - PSD1000F INSTRUCTION MANUAL Universal AC Input Switching Power Supply 24 Vdc Output DIN-Rail Models PSD1000, PSD1000F PSD1000 - Universal AC Input Switching Power Supply 24 Vdc Output ISM0089-4
More informationMINI MCR-SL-CVS NC
Constant voltage source Data sheet 105264_en_01 PHOENIX CONTACT 2013-04-03 1 Description Configurable constant voltage source for generating highprecision constant voltages. The voltage supply is also
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 6 File number: ACE15/777/1 Product code: 2532H This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com This certificate is issued
More informationLoad Disconnect Switches and Motor Switches
Load Disconnect Switches and Motor Switches 594 Load Disconnect Switches and Motor Switches Contents Load Disconnect Switches and Motor Switches Safety Switches made of Resin 10, 12/16, 16, 20, 25, 40,
More informationMicro Motion, Inc. Page 1 of 6
EB-20025742 Revision: AA Number of Pages: 6 Comments: Originator: HVH 10/01/13 Approved: RCS 11/26/13 Rev ECN Description Approval Date AA 1049085 Release to Approvals RCS 11/26/13 Micro Motion, Inc. Page
More informationPosition Switches Series 8070
www.stahl.de > Enclosures of type of protection "Increased safety > Dimensions and characteristic values according to EN 50041 > Replaceable contact in flameproof enclosure > Positive opening contacts
More informationProviding flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2.
e X L i n k exlink 7-pole / 6-pole + PE for Zone 1 and Zone 21 Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2. The exlink 7
More informationSolConeX extra-low voltage flange socket
SolConeX extra-low voltage flange socket Operating instructions Additional languages www.stahl-ex.com Contents 1 General Information...3 1.1 Manufacturer...3 1.2 Information regarding the operating instructions...3
More informationDeltaV Bulk Power Supplies
DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A, 10A, 20 A, 40 A Bulk Power Supplies. DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to
More information4 Remote I/O. Digital Output Module 8-Channel Version Series 9475/ from Rev. F
4 Remote I/O Digital Output Module 8-Channel Version 8 channels for Ex i / I.S. solenoid valves, piezo and booster valves Intrinsically safe outputs Ex ia IIC Additional input for "Outputs OFF" available
More informationPROCESS AUTOMATION INSTRUCTION MANUAL FIELDBUS SURGE PROTECTOR F*-LBF-I1.32 F*-LBF-D1.32
PROCESS AUTOMATION INSTRUCTION MANUAL FIELDBUS SURGE PROTECTOR F*-LBF-I1.32 F*-LBF-D1.32 With regard to the supply of products, the current issue of the following document is applicable: The General Terms
More informationMicro Limit Switch Series 8064
> For universal application > Versions with snap-action contact positive opening contact > With connecting cable or with single cores when it is used as a built-in device > Width Single limit switch 11
More informationCPU module for zone 2 Series 9442/35
> Supports PROFIBUS DP, PROFINET, Modbus TCP and Ethernet/IP; incl. HART transmission > RS-485 (max. 12 Mbps) and Ethernet (max. 100 Mbps) interfaces > Extensive diagnostics based on NE 107 > Support of
More informationGrounding Systems / Ground Monitoring Device Series 8146/5075 and 8125/5071
www.stahl.de > Monitored electrostatic grounding of tank containers and drums during loading > Continuous monitoring of correct grounding > Robust design > Weather-protected plastic enclosure (IP66) or
More informationDesign Benefits. Teo Puay Yong Pepperl+Fuchs. On Behalf of FF Marketing Society. The Future is Digital. 1 The Future is Digital
Design Benefits The Future is Digital Teo Puay Yong Pepperl+Fuchs On Behalf of FF Marketing Society 1 The Future is Digital Design Benefits from Applying Foundation Fieldbus Bus structure and Wiring Loop
More informationBVS 16 ATEX E 118 X / IECEx BVS X Types 8791, 8792, Additional Instructions. Zusatzanleitung Instruction supplémentaire
/ IECEx BVS 16.0091 X Types 8791, 8792, 8793 Position controller and process controller with II 3G Ex ec ic IIC T4 Gc / II 3D Ex tc IIIC T135 C Dc approval Stellungsregler und Prozessregler mit Zulassung
More informationTermination Board FC-GPCS-SAI16-PF. Features. Assembly. Function. Connection. SAI-1620m HART 24 V DC (I), 24 V DC (II) Fault. Zone 0, 1, 2 Div.
Features Assembly System board for Honeywell Safety Manager For 6-channel AI card SAI-60m For 6 modules Recommended module: HiC05 (AI) 4 V DC supply Hazardous area: pluggable screw terminals, blue Non-hazardous
More informationInstallation & Operation Manual
Via Enrico Fermi, 2 I-25015 Desenzano del Garda (BS) - Italy Phone: +39 030 7870787 Fax: +39 030 7870777 www.solexy.net BAF Intrinsically Safe Ethernet Coupler for signals operating in Hazardous Areas
More informationD5090S INSTRUCTION MANUAL. D A SIL 3 Relay Output Module for NE Load. DIN-Rail and Termination Board, Model D5090S
D5090S INSTRUCTI MANUAL 4 A Relay Output Module for NE, DIN-Rail and Termination Board, Model D5090S D5090-4 A Relay Output Module for NE G.M. International ISM09-3 Characteristics General Description:
More informationAssembly. Front view. LED yellow: Relay output. LED red: LB/SC Power Rail
Switch Amplifier Features Assembly -channel isolated barrier 4 V DC supply (Power Rail) Dry contact or NAMUR inputs Relay contact output Line fault detection (LFD) Reversible mode of operation Up to SIL
More information95100, 2/2 (stainless steel) Direct solenoid actuated poppet valves
9500, / (stainless steel) > > Port size: G/8, G/4, /4 NPT > > Working from 0 bar up > > Assembled free of oil and grease > > Suited for fine vacuum down to,33 0 - mbar > > For a.c. solenoid systems with
More informationAssembly MAU. MUX 4 Channels 8 Channels Zone 1
Multi-Input/Output Device for Cabinet Installation Features Assembly For discrete inputs and outputs Installation in Zone 1/Div. 1, intrinsically safe Sensors in Zone 0/Div. 1 Connection to fieldbus acc.
More informationARC 600 & 1200 LED LAMP FOR Ex-ENVIRONMENT
ARC 600 & 1200 LED LAMP FOR Ex-ENVIRONMENT Author : Barel AS Rev 9 Date : 07.11.2017 Barel AS 9917 Kirkenes Norway www.barel.no CONTENTS : 1 APPLICATIONS... 2 2 APPROVALS... 2 3 TECHNICAL DATA... 3 3.1
More informationINSTRUCTION MANUAL. SIL 3 Relay Output Module DIN-Rail Models D1092S-069, D1092D-069 D1092S D1092D-069
D09S09 D09D09 INSTRUCTION MANUAL SIL Relay Output Module DINRail Models D09S09, D09D09 D0909 SIL Relay Output Module ISM00 SIL Applications For Safety Related System and SIL, SIL Applications according
More informationINTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Certificate history: Issue No.
More informationEthernet CPU Module & Power Module for Zone 1 / Div. 1 Series 9441/12 and 9444/12
www.stahl.de > Fieldbus connection Industrial Ethernet PROFINET, Modbus TCP or EtherNet/IP with 100 MBit/s > Redundant Ethernet connection (Modbus TCP) is possible > Explosion protected, optical inherently
More informationData sheet. Constant current DALI LED control gear 80 W Output power ma Output current Intelligent temperature protection.
Data sheet Constant current DALI LED control gear 8 W Output power 5 7 ma Output current Intelligent temperature protection Linear VI LED Linear VI LED control gear More than 25 years of experience in
More informationAssembly MAU. MUX 4 Channels 8 Channels Zone 1
Multi-Input/Output Device for Cabinet Installation Features Assembly For discrete inputs and outputs Installation in Zone 1/Div. 1, intrinsically safe Sensors in Zone 0/Div. 1 Connection to fieldbus acc.
More informationLoop-powered Transmitter for Thermocouple Type K (NiCr-Ni)
Data sheet 302040_en MTP300i-SIL-K Loop-powered Transmitter for Thermocouple Type K (NiCr-Ni) Properties 2-wire temperature transmitter for DIN rails Galvanic isolated TC-input with cold-junction compensation
More informationPage 1 of 5. Increased Safety, Encapsulation and Dust
IEC INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www iecex com Certificate No.: Status: Date of Issue: IECEx
More informationAutomated Precision Weighing
Automated Precision Weighing Smart Load-Cell Technology The load cell, with Monobloc technology, is at the core of the SLF6-Series load cells and guarantees the highest precision and reliability. A robust
More information4 Remote I/O. Digital Output Module 8-Channel Version Type 9475/ from Rev. F
4 Remote I/O Digital Output Module 8-Channel Version 8 channels for Ex i solenoid valves, piezo and booster-valves Intrinsically safe Ex ia IIC outputs Additional input for Plant-STOP available (acc. to
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx ITA 14.0009X Issue No:
More informationSolConeX Wall-Mounted Socket, 16 A
SolConeX Wall-Mounted Socket, 16 A Operating instructions Additional languages www.stahl-ex.com General Information Contents 1 General Information...2 1.1 Manufacturer...2 1.2 Information Regarding the
More informationEx-control switch Typ 292 without and Typ 293 with measuring instrument
Ex-control switch GHG 9 and GHG 9 GHG 9 GHG 9 Technical data Ex-control switch Typ 9 without and Typ 9 with measuring instrument with GHG 9 Switch with GHG Switch Marking accd. to 0//EU D II G Ex ed ia
More informationMRE Series 16 and 32 Amp Multiple Socket Outlets Stationary and Portable. Increased Safety
MRE Series 16 and 32 Amp Multiple Socket Outlets Applications Plugs and sockets are used with portable or stationary electrical equipment such as: Lighting systems Conveyors Heaters Motor generators Air
More informationInstallation & Operation Manual
Via Enrico Fermi, 2 I-25015 Desenzano del Garda (BS) - Italy Phone: +39 030 7870787 Fax: +39 030 7870777 www.solexy.net BAF Intrinsically Safe Ethernet Coupler for signals operating in Hazardous Areas
More informationProcess display RIA 251. Digital loop powered display for ma current loops. Application areas. Plant and machine construction.
Technical information TI 063R/09/en Mat. No. 510 00857 Process display RIA 251 Digital loop powered display for 4...20 ma current loops Application areas Plant and machine construction Control panels Laboratory
More information1756 ControlLogix Chassis Specifications
Technical Data 1756 ControlLogix Chassis Specifications Catalog Numbers 1756-A4/B, 1756-A7/B, 1756-A10/B, 1756-A13/B, 1756-A17/B, 1756-A4LXT, 1756-A5XT, 1756-A7LXT, 1756-A7XT Topic Page Standard ControlLogix
More informationCable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof
757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP
More informationPTB 01 ATEX Operating Instructions. Solenoid coil Type AC21 Magnetspule Typ AC21 Bobine magnetique AC21
Solenoid coil Type AC21 Magnetspule Typ AC21 Bobine magnetique AC21 Device with II 2G EX i approval Geräte mit II 2G EX i Zulassung Appareils avec mode de protection II 2G EX i Operating Instructions Bedienungsanleitung
More informationINTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Status: Date of lssue: Applicant:
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx BKI 07.0001X issue No.:1
More informationSUPPLEMENTARY TYPE EXAMINATION CERTIFICATE
1. SUPPLEMENTARY TYPE EXAMINATION CERTIFICATE 2. Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC 3. Type Examination Certificate Number: ITS13ATEX47876X/1
More informationTermination Board FC-GPCS-RIO16-PF. Features. Assembly. Function. Connection USIO/UPIO 24 V DC (I), 24 V DC (II) Fault. Zone 0, 1, 2 Div.
Features Assembly System board for Honeywell Universal Safety IO System board for Honeywell Universal Process IO For 6-channel cards USIO and UPIO For 6 modules Recommended modules: HiC8R (DI), HiC85R
More informationInstallation Instruction. HART Add-On Module
- Translation Typs 17-A1Z0-0005, B7-A2Z0-0033 and G7-A0Z0-0007 Version for: Non hazardous areas ATEX/IECEx Zone 1 and Zone 2 UL Class I Division 1 and Division 2 Document No.: B1-A2Z0-7N0001 / 400570 Revision
More informationMINI MCR-SL-UI-2I(-SP)(-NC)
Data Sheet 03/2005 Product Description Features Configurable signal duplicator MINI MCR-SL-UI-2I(-SP)(-NC) is used to electrically isolate, condition, amplify, and filter analog standard signals. On the
More informationTermination Board. HiCTB08-SCT-44C-SC-RA. Features. Assembly. Function. Connection. 24 V DC (I), 24 V DC (II), Fault. Zone 0, 1, 2 Div.
Termination Board HiCTB08-SCT-C-SC-RA Features Assembly For 8 modules V DC supply Supported signal types: DI/DO/AI/TI/AO Hazardous area: screw terminals, blue Safe area: screw terminals, black Function
More informationEXPLORER. Industrial Panel PC - Flexible Modular Design
Gecma Explorer series HAZARDOUS AREA PC s Ex Zone 1 / 2 (Gas) Ex Zone 21 / 22 (Dust) Hazardous areas Industrial Panel PC - Flexible Modular Design For Ex Zone 1 / 2 (Gas) Class I, Zone 1 / Class I, Div.
More informationBA448CF-F FOUNDATION fieldbus Intrinsically safe Panel mounting 8 variable Fieldbus Indicator Issue 3
BA448CF-F FOUNDATION fieldbus Intrinsically safe Panel mounting 8 variable Fieldbus Indicator Issue 3 Issue: 3 23 rd June 2011 2 CONTENTS 1. Description 1.1 Documentation 2. Operation 2.1 Error messages
More informationNEW NEW NEW NEW NEW NEW Electrical specification ESP SL06 ESP SL15 ESP SL30 ESP SL50 ESP SL110 ESP SL TN
Line Current rating In-line resistance Nottingham, NG EB, UK 0V 6.7V 750mA.0Ω 0kA 6V ESP SL Series Combined Category D, C, B tested protector (to BS EN 66) suitable for twisted pair signalling applications
More informationMiniature Circuit-Breaker IEC Series 8562
> 1 to 3 pole versions > Rated current from 0.5... 40 A > 6 or 10 ka breaking capacity to DI VDE 0641, respectively E 60898 > Isolating Function to E 60947-2 > Permanently set thermal and magnetic trips
More informationFB-6SP and FB-12SP. Block device couplers. Data sheet 3177_en_A. 2 Features. 1 Description
Block device couplers Data sheet 3177_en_A 1 Description PHOENX CONTACT 2015-01-20 2 Features The and block couplers provide an interface between the fieldbus trunk cable and field devices on Foundation
More informationF101, F102, F104. Relcom Installation Instructions. Fieldbus Power Supply F101-PS
F101, F102, F104 Fieldbus Power Supply F101-PS Installation Instructions Relcom www.mtl-fieldbus.com CONTENTS PAGE 1 OVERVIEW 2 2 DESCRIPTION 2 3 COMPONENTS AND ACCESSORIES 2 4 MECHANICAL 3 4.1 Mounting
More informationMINI MCR-SL-PT100-UI-200
Configurable temperature transducer for PT00 INTERFACE Data sheet 078_en_0 PHOENIX CONTACT 00-0-5 Description The MINI MCR-SL-PT00-UI-00... is a configurable -way isolated temperature transducer. It is
More informationIECEx Certificate of Conformity
Certificate : IECEx PTB 04.0005 http://iecex.iec.ch/iecex/iecexweb.nsf/certificatesajax/iecex%20ptb%2004.0005%... Seite 1 von 4 10.01.2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme
More informationOperating manual ELX channel digital input terminal for NAMUR sensors, Ex i. Version: Date:
Operating manual ELX1052 2-channel digital input terminal for NAMUR sensors, Ex i Version: Date: 1.5.0 2018-08-08 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation...
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the ECEx Scheme visit www.iecex.com Certificate No.: Status: Current Issue No: 1 Certificate
More informationSA-P. Ex e. Stainless steel captive screws. Metal plates riveted onto lid
SA-P - Zone 1, 2, 21, 22 - Polyester junction boxes - Choice of 9 sizes - With antistatic property - IK10 mechanical strength - IP66 Metal plates riveted onto lid Stainless steel captive screws ORIGINAL
More informationOperating manual ELX9012, ELX9410, ELX9560. ELX System Terminals. Version: Date:
Operating manual ELX9012, ELX9410, ELX9560 ELX System Terminals Version: Date: 1.5.0 2018-08-08 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1.2 Safety instructions...
More informationFisher i2p-100 Electro-Pneumatic Transducer
i2p-100 Transducer Product Bulletin Fisher i2p-100 Electro-Pneumatic Transducer The Fisher i2p-100 electro-pneumatic transducer, uses a converter module that converts a milliampere input to a proportional
More information21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
More information(1) EC-TYPE-EXAMINATION CERTIFICATE (Translation) (2) Equipment and protective systems intended for use in potentially explosive atmospheres Directive 94/9/EC (3) EC-type-examination Certificate number
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: Status: IECEx UL 15.0032X Current
More informationGeneral Specifications
General Specifications Model MLX Loop Powered Process Indicator GS 60A02S01-01E-A The Model MLX Loop-Powered Process Indicator receives DC current signals from electronic transmitters and indicates process
More information