TE CONNECTIVITY (TE) 048 EURO TYPE C PIN ST ASSY. EUROCARD Eurocard. TE Internal Number: Alias ID:
|
|
|
- Emory Woods
- 5 years ago
- Views:
Transcription
1 TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS TE CONNECTIVITY (TE) 048 EURO TYPE C PIN ST ASSY TE Internal Number: Alias ID: Always EU RoHS/ELV Connector Style Plug Active PRODUCT DRAWING 3D Mounting Angle Vertical Number of Columns 16 Product Drawings PIN ASSEMBLY, EUROCARD, TYPE 1/2C ASSEMBLY, PIN EUROCARD, TYPE C,.104 SOLDER POST CAD Files 3D 3D 2D_DXF.ZIP 3D_IGS.ZIP 3D_STP.ZIP Product Specifications Application Specification Qualification Test Report Eurocard Connectors Types B,C,M,Q,R, & Enchanced Type C (-To- Application) Eurocard Connector Eurocard Connector TIF Product Environmental Compliance TE Material Declaration MD_ _ _dmtec
2 Instruction Sheets Instruction Sheet (U.S.) Soldering And Cleaning Eurocard Connectors Please review product documents or contact us for the latest agency approval information. Please Note: Use the Product Drawing for all design activity. Product Type Features Connector Style Plug Applies To Printed Circuit Connector System -to- Row-to-Row Spacing 2.54 mm [.1 in ] Size Half DIN Level II PCB Mounting Orientation Right Angle Guides Without Product Type Connector Make First / Break Last No Shielded No Post Type Solder Post Connector Type Connector Assembly Configuration Features Number of Columns 16 Number of Power or Coaxial Positions 48 Number of Signal Positions 48 Number of Rows 3 Rows Loaded A, B, C Electrical Characteristics Operating Voltage (VAC) 250 Contact Features Contact Termination Area Plating Thickness µm [ µin ] Contact Current Rating (A) 1.5 Contact Transmits (Typical) Signal (Data) Contact Base Material Brass Contact Termination Area Plating Material Tin-Lead Contact Cross Section.64 x.64 mm [.025 x.025 in ] Contact Mating Area Plating Thickness.76 µm [ 30 µin ]
![Alignment With PCB Mount Retention Without Housing Features Centerline 2.54 mm [.1 in ] Housing Material Polyester - GF Dimensions Tail Length 2.64 mm [.](/docs-images/87/95043595/images/3-1.jpg "103 in ] Usage Conditions Operating Temperature Range -55 125 C [ -67 257 F ] Industry Standards UL Flammability Rating UL 94V-0 Packaging Features Packaging Method Box Product Compliance Statement")
3 Contact Type Pin Contact Mating Area Plating Material Gold Termination Features Termination Post Length 2.65 mm [.104 in ] Interface Type Eurocard/DIN Termination Method to PC Through Hole - Solder Mechanical Attachment Mounting Angle Vertical Mating Alignment Type Polarization Mating Retention With Mating Alignment With PCB Mount Retention Without Housing Features Centerline 2.54 mm [.1 in ] Housing Material Polyester - GF Dimensions Tail Length 2.64 mm [.103 in ] Usage Conditions Operating Temperature Range C [ F ] Industry Standards UL Flammability Rating UL 94V-0 Packaging Features Packaging Method Box Product Compliance Statement of Compliance VIEW ALL PRODUCT COMPLIANCE CUSTOMERS ALSO BOUGHT MULTIPLE CONFIGURATION PCB HEADERS & RECEPTACLES WIRE-TO-BOARD CONNECTOR HOUSINGS 12 MODII HDR DRST SHRD.100CL ASSY, PIN, EUROCARD, TYPE C/2, LEA ASSY, PIN, EUROCARD, TYPE R/2, LEAD-FREE, MODIV HSG COMP DR.100 POL A E 5
4 Products - 11 Results View All Compare 0/10 Relation Type See All V42254B2201C480=PC TE INTERNAL NUMBER: ALIAS ID: V42254B2201C480 Active See All V42254P2263C480=PC TE INTERNAL NUMBER: ALIAS ID: V42254P2263C480 Active See All V42254B2202C480=PC TE INTERNAL NUMBER: ALIAS ID: V42254B2202C480, V42254B2302C480
5 Active Row-to-Row Spacing 2.54 mm
TE CONNECTIVITY (TE) 096 EURO TYPE R PIN ST ASSY. EUROCARD Eurocard Type R. TE Internal Number: Alias ID: ,
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved EUROCARD TE CONNECTIVITY (TE) 096 EURO TYPE R PIN ST ASSY 650470-5 TE Internal Number: 650470-5
HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS HEADERS & RECEPTACLES TE CONNECTIVITY (TE) 2.5mm,HDR,2pos,Vertical, Connector HPI
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS PCB D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) 2MM FB,ASY,048,SIG,HDR,EN,6.50
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
RECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
Product Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
Product Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
Dubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS The e-con standard was developed in Japan in 2001 by a group of Japanese manufacturers in order to standardize connections from sensors to terminals.
FLAT FLEXIBLE CABLE (FFC) CONNECTORS
FLAT FLEXIBLE CABLE (FFC) CONNECTORS TE Connectivity s (TE) family of FFC connectors includes a variety of high density cable-to-board and cable-to-cable connectors designed for automated assembly. The
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
Minitek Pwr 4.2 BMI Product Presentation
BMI Product Presentation Basics Portfolio BMI Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Stacking Height Matrix Markets & Applications Collaterals
(Smallest Circuit) Current Rating. (Largest Circuit) Housing Lock. Current Rating. 12A 11A Positive or None
General Overview The Jr. was specifically developed for positive locking, wire-to-wire and wire-to-board applications. It is available in single row and dual row versions. The system offers the widest
EXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS Quick Reference Guide AMP-LATCH connectors are ribbon cable-to-board devices used to make the transition between ribbon cable and pc board circuitry. They
Minitek Pwr 4.2 HCC Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Markets & Applications Marcomm Collaterals Product Presentation 2
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
COMMUNICATIONS, DATA, CONSUMER DIVISION DIN Selector Guide. PCB Connectors
COMMUNICATIONS, DATA, CONSUMER DIVISION DIN 41612 Selector Guide PCB Connectors FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries, FCI is a leading manufacturer of connectors. Our
3M Serial Advanced Technology Attachment (SATA) Connector Signal Plug, Boardmount, Surface Mount Right Angle and PTH Vertical
7-position supports motherboard signal requirements EMLB contacts for hot swap Blind mate polarization for easy cable attach Through-hole and surface mount options PCB retention clip aids manufacturing
Mini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
Minitek Pwr 3.0 BMI Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Specifications Features & Benefits Part Numbers Markets & Applications Marcom Collaterals Product Presentation - 2 Value Proposition
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
Connectors DIN 41612/IEC
Connectors DIN 41612/IEC 60603-2 and completions General information The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19"
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS A concept that is saving your most valuable asset your time. The contact design based on insulation displacement of our RITS (Remote I/O Termination
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
Vertical Top Entry Card Edge: BTB
AVX continues to develop unique connectors to fill the gap in the industrial market, specifically as it relates to low pin count requirements. The newest addition to AVX s broadening line of one piece
Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
Right angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
Bergstak 0.80mm Pitch Product Presentation
Bergstak 0.80mm Pitch Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals
PRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
Introduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
The con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
AMP-HDI* Connectors. Solder Tail. Keying Hole Keying Hole. Vertical Pin Assembly. Figure 1
AMP-HDI* Connectors Application Specification 114-9008 24 APR 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches]. Unless
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
Connectors DIN 41612/IEC
Connectors DIN 41612/IEC 60603-2 and completions ERNI-electronic components quality assessed according to CECC 75101-801 2 www.erni.com/contact/ General information The DIN 41612/IEC 60603-2 connector
Universal MATE-N-LOK Headers for UMNL II Connectors
for UMNL II Connectors PC Board Vertical Pin Headers [6.5] Centerline spacing,, and 5 Circuit, In-Line Housing Nylon Flammability ating UL9V-0 Contacts Phosphor bronze Solder tail diameter.06 [1.57] elated
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
AMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
FCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
Product Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
[.050 (1.27mm) Density. D-Microminiature]
![[.050 (1.27mm) Density. D-Microminiature]](/thumbs/90/103901339.jpg "[.050 (1.27mm) Density. D-Microminiature]")
Commercial [.050 (1.27mm) Density Solder Introduction Cup/Wire D-Microminiature] Cinch Commercial Products, consisting of Jones Plugs and Sockets, Barrier Blocks, Edge Cards, Two-Piece Commercial Dins,
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
Quick Reference Guide AMPMODU System 50
Quick Reference Guide AMPMODU System 50 The AMPMODU System 50 connector family includes a wide variety of high density boardto-board (through hole and surface mount) and cable-to-board connectors. AMPMODU
PRODUCT SPECIFICATION
PRODUCT SPECIFITION PAGE: 1 OF 7 REV: A Serial ATA Connector, (22SAPP-X-X) LIST OF REVISION REV PAGE DESCRIPTION ECN. NO. DATE A 01-07 NEW E9201035 01/24/03 PRODUCT SPECIFITION PAGE: 2 OF 7 REV: A Serial
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
AMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
SINGLE ROW BREAKAWAY HEADER
SINGLE ROW REKWY HEDER 3986 SERIES SERIES. 3.96mm(0.156 ). Round Pin. For PC Solder! vailable in 1through 20 circuits! Mates with 3940, 3950, 3970, 3971 and 3972 series! Insulator Material: Nylon 6/6 UL
Modular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
decoupled connectors RF Coax Connectors Product Facts
Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount
XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
ANSI C Dimming Light Controller Base Assembly and Cover
ANSI C136.41-2013 Dimming Light Controller Base Assembly and Cover Application Specification 114-32159 24 APR 17 Rev C NOTE All numerical values are in metric units [with U.S. customary units in brackets].
Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
CMC CP Terminals CP 0.635mm (.025 ) CP 1.50mm (.059 ) CP 2.80mm (.110 ) FEATURES AND SPECIFICATIONS
FEATURES AND SPECIFICATIONS CMC Connectors sealed, high-density, modular and cost-effective connection system for heavy-duty applications The CMC connector family from Molex is a sealed, high-density connection
USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
Termination End. Figure 1
AMP- LATCH* Application Specification Universal Headers 114-40020 with ACTION PIN* Contacts 19 DEC 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
Introducing. Economy Power 2.5 (EP 2.5) Connector Series. EP 2.5 connector halves are available from 2 to 40 positions. ELECTRICAL
Introducing Economy Power. (EP.) Connector Series EP. -Posn Receptacle Housing with Latch and Tabs, Part Number - Economy Power. connector (EP.) is a new type of single row or dual row crimp connector
PNI Connectors. 2.0mm pitch wire to board/wire to wire solutions. Purpose:
PNI Connectors 2.0mm pitch wire to board/wire to wire solutions Purpose: To introduce the PNI wire-to-board and wire-to-wire, crimp style connector from JST. Objectives: Illustrate the intended application.
ERNIPRESS Trapezoidal-Connectors Series TMC
ERNIPRESS Trapezoidal-Connectors Series TMC Subminiatur-D Connectors to DIN 41 652/IEC 807-3 with Press-fit zone General Solderless press-in technology for connectors in bus systems permits rationalized
Application Specification IMPACT* Standard Connector Systems 05 NOV 10 Rev A
Application Specification IMPACT* Standard 114-13258 Connector Systems 05 NOV 10 Rev A NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.
CHAMP* Printed Circuit (PC) Board Mounted Connectors
CHAMP* Printed Circuit (PC) Board Mounted Connectors Application Specification 114-6036 16 SEP 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
This front connection is composed of: 1. Right Angle Male Connector 2. Cable Connector Female
This specification covers the requirements for the application of Z PACK 2 mm HM Interconnection System for Board to Board Connections and provides information on the standard modules (Types A, B, C, A/B,
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position