SOLDERABLE MEMORY MODULE (SMM)
|
|
|
- Wesley Abraham Barnett
- 5 years ago
- Views:
Transcription
1 SOLDERABLE MEMORY MODULE (SMM) DATA SHEET ABSTRACT The Solderable Memory Module (SMM) is an alternative to SD/MMC cards for use in industrial and medical embedded systems. The module combines all the advantages of a SD/MMC card without its disadvantages, in particular the need for an additional cardholder and manual card assembly. The SMM is built especially for harsh environments, where a Memory-Card with cardholder is not suitable due to required coatings, vibration or impact and also where production volumes or assembly technologies do not allow the use of a discrete setup on the motherboard. Built with SLC NAND Flash and a Flash controller from Hyperstone, the module is approximately half the size of a conventional SD/MMC memory card, offers a controlled and transparent BOM. In addition to different memory capacities the SMM can also be supplied with customised software. KEY FUNCTIONS Fast and reliable memory module (can be soldered to any PCB) Available in capacities from 1024 and 2048 MBytes Simple interface compatible to SD/MMC-Card Supports SPI interface Replaces standard SD-Card / MMC card in applications (where card does not have to be replaced) Uses high performance SLC Flash memory for highest reliability and high number of write cycles SPC SMM-Data-Sheet 1 of 6
2 PIN LAYOUT SPI MODE SD/MMC MODE PIN NAME TYPE SIGNAL NAME TYPE SIGNAL 1 SPI_CS Input Chip select SD_DAT3 Input / Output SD Data Line 3 2 SPI_DI Input Serial data input CMD Input / Output Command line 3 GND Power GND GND Power GND 4 VDD Power Power supply VDD Power Power supply 5 SPI_CLK Input Clock input CLK Input Clock signal 6 GND Power GND GND Power GND 7 SPI_DO Output Serial Data Output SD_DAT0 Input / Output SD Data line 0 8 Reserved SD_DAT1 Input / Output SD Data Line 1 9 Reserved SD_DAT2 Input / Output SD Data Line 2 10 NC None No internal connection NC None No internal connection 11 NC None No internal connection NC None No internal connection 12 NC None No internal connection NC None No internal connection 13 NC None No internal connection NC None No internal connection 14 NC None No internal connection NC None No internal connection SPC SMM-Data-Sheet 2 of 6
3 ELECTRICAL SPECIFICATION ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL MIN MAX UNITS Power supply voltage with respect to ground VCC V I/O Voltage for any input with respect to ground VIO -0.3 VCC V Operating temperature range Top C Storage temperature range Tst C DC SPECIIFCATION (RECOMMENDED OPERATING CONDITIONS +25 C) PARAMETER SYMBOL MIN MAX UNITS Power supply voltage with respect to ground VCC V Operating current ICC ma I/O Voltage for any input with respect to ground VIO -0.3 VCC V Operating temperature range Top C Storage temperature range Tst C Input LOW Voltage VIL % of VCC V Input HIGH Voltage VIH 62.5% of VCC VCC V Output LOW Voltage (@ 100 µa Load) VOL 12.5% of VCC V Output HIGH Voltage (@ 100 µa Load) VOH 75% of VCC V Input leakage current ILI ± 10 µa Output leakage current ILO ± 10 µa Input/Output capacitance CI/O 15 pf Power supply voltage with respect to ground VCC V AC SPECIFICATIONS PARAMETER SYMBOL MIN MAX UNITS Clock in data transfer mode fdata 25 MHz Clock in identification mode fid 400 khz Clock low time 10 ns Clock high time 10 ns Clock rise time 10 ns Clock fall time 10 ns CMD, DATA input setup time Tisu 5 ns CMD, DATA input hold time Tih 5 ns CMD, DAT output delay time Todly 14 ns SPC SMM-Data-Sheet 3 of 6
4 MECHANICAL SPECIFICATION MECHANICAL DIMENSIONS PARAMETER SYMBOL NOM TOL UNITS Length L 21.4 ±0.2 mm Width W 20 ±0.2 mm Height H mm SOLDERING Single Re-Flow Process only Solder profile for lead free solder process: Preheat: 150 C to 200 C (60 to 120 sec) Maximum solder temperature: 240 C (max 10 sec) Limit time above 220 C (30 to 60 sec) Ramp down: < 2 C / sec SPC SMM-Data-Sheet 4 of 6
5 CAPACITY Approximately 2-4 % of the theoretical memory space is not usable for the file system due to bad block handling and internal organization overhead. This is a common limitation for standard SD- and MMC-Cards. For a 1024 MByte device, the usable capacity is approximately 998 MBytes. For optimal performance while writing / updating data, only a portion of the capacity should be used. Unused capacity is used for internal organization and will improve system behaviour. ORDERING INFROMATION ORDER CODE CCCC I SMM_CCCC.IPVTD.HH.SS Capacity Interface (M) MMC-Card (S) SD-CARD P Package Type (L) LCC 20x22mm 2 T D HH SS Temperature Range (E) -25 C C Delivery in (T) Tubes (standard) or (R) as Tape & Reel (optional) Hardware Revision Software Revision E.G. SMM_1024.SLET : 1024 MBytes SD-Mode, LCC package 20 x 22 mm 2 SMM_2048.SLET : 2048 MBytes SD-Mode, LCC package 20 x 22 mm 2 TRACEABILITY To provide full tracking capability changes in device Revision codes are updated in case of: revision changes in controller hardware revision changes in memory hardware revision changes in controller software revision changes in PCB SPC SMM-Data-Sheet 5 of 6
6 DOCUMENT INFORMATION Title Document Type Document Number Document Status Solderable Memory Module Data Sheet SPC SMM-Data-Sheet Preliminary DOCUMENT STATUS Objective specification Advance Information This data provided herein represents target values. Revised and supplementary data will be published later This data provided herein is based on early testing. Revised and supplementary data will be published later Preliminary The data provided herein is based product verification. Revised and supplementary data may be published later. Released The data given is the product specification. CONTACT INFORMATION Art of Technology AG Technoparkstrasse 1 CH-8005 Zurich Switzerland T: +41 (43) F: +41 (43) E: info@aotag.ch W: THIS DOCUMENT APPLIES TO THE FOLLOWING PRODUCTS NAME MEMORY SIZE HW VERSION SW VERSION PCN REFERENCE SMM 1024 Mbytes SMM_1024.xLET.0101 SMM 2048 MBytes SMM_2048.xLET.0101 This document and the use of any information contained herein, is subject to the acceptance of the Art of Technology terms and conditions. They can be acquired from info@aotag.com. Art of Technology makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright 2011, Art of Technology AG SPC SMM-Data-Sheet 6 of 6
SLC Commercial and Industrial Secure Digital (SD/SDHC) Card
SLC Commercial and Industrial Secure Digital (SD/SDHC) Card Engineering Specification Document Number L5ENG00432 Rev. 1.8 No part of this document may be reproduced, stored in a retrieval system, or transmitted
Industrial Solution SD Card 3.0 Specification Preliminary Ver. 1.1
Industrial Solution SD Card 3.0 Specification Preliminary Ver. 1.1 Contents A. General Description... 3 B. Features... 4 C. Comparison of SD Card... 5 D. Pin Assignment... 6 E. Power Consumption... 8 F.
SQFlash Industrial SD Card SQFlash Technical Manual
SQFlash Technical Manual REV 0.2 Page 1 of 15 Jul. 9, 2010 CONTENTS 1. Overview... 4 2. Standard Features... 5 3. Additional Features... 6 4. Pin Assignment and Block Diagram... 7 5. Power Consumption...
LY68L M Bits Serial Pseudo-SRAM with SPI and QPI
REVISION HISTORY Revision Description Issue Date Rev. 0.1 Initial Issued May.6. 2016 Rev. 0.2 Revised typos May.19. 2016 Revised the address bit length from 32 bits to 24 bits Oct.13. 2016 0 FEATURES GENERAL
LP621024E-I Series 128K X 8 BIT CMOS SRAM. Document Title 128K X 8 BIT CMOS SRAM. Revision History. AMIC Technology, Corp.
128K X 8 BIT CMOS SRAM Document Title 128K X 8 BIT CMOS SRAM Revision History Rev. No. History Issue Date Remark 0.0 Initial issue January 14, 2008 Preliminary 1.0 Final version release September 21, 2010
Unity Digital Industrial Solution SLC SD 3.0 Specification
Unity Digital Industrial Solution SLC SD 3.0 Specification Contents A. General Description...1 B. Features...2 C. Comparison of SD Card...3 D. Block Diagram...4 E. Power Consumption...6 F. Environmental
Rev. No. History Issue Date Remark
Preliminary 512K X 8 OTP CMOS EPROM Document Title 512K X 8 OTP CMOS EPROM Revision History Rev. No. History Issue Date Remark 0.0 Initial issue June 17, 1998 Preliminary 1.0 Change CE from VIL to VIH
UMSDXXXGBP Micro-SD 3.0 Memory Card Specification
Micro-SD 3.0 Memory Card Specification Version 1.1 Revision History Revision History Draft Date Remark 1.0 First Release 2011-03-21 Andre 1.1 Mechanical Drawing updated 2011-07-01 Eric A. General Description
Micro-SD 3.0 Memory Card. Specification Non-UHS
NO.1, Qun Yi Rd, Jhunan, Miaoli, Taiwan 350, R.O.C. Tel: 886-37-586-896 Fax: 886-37-587-868 Website: www.phison.com Email: Support@phison.com Phison Electronics Corporation Micro-SD 3.0 Memory Card Specification
16Mbit, 512KX32 CMOS S-RAM MODULE
16Mbit, 512KX32 CMOS S-RAM MODULE Features Access Times: 25, 35 and 45ns Package Options: 66-Pin Ceramic PGA 1.385" SQ 66-Pin Ceramic PGA 1.173" SQ 68-Lead Ceramic QFP 0.88" SQ Fit & Function JEDEC 68-CQFP
AT29C K (32K x 8) 5-volt Only CMOS Flash Memory. Features. Description. Pin Configurations
Features Fast Read Access Time - 70 ns 5-Volt-Only Reprogramming Page Program Operation Single Cycle Reprogram (Erase and Program) Internal Address and Data Latches for 64-Bytes Internal Program Control
16Mbit, 512KX32 CMOS S-RAM MODULE
16Mbit, 512KX32 CMOS S-RAM MODULE Features Access Times: 17 and 20ns Package Options: 66-Pin Ceramic PGA 1.080" SQ 66-Pin Ceramic PGA 1.173" SQ 68-Lead Ceramic QFP 0.88" SQ Fit & Function JEDEC 68-CQFJ
512KX8 CMOS S-RAM (Monolithic)
512KX8 CMOS S-RAM (Monolithic) Features Access Times: 55, 70, 85 and 100ns Package Option: 32-Pin Ceramic DIP, JEDEC Approved Pinout 36-Lead Ceramic SOJ JEDEC Approved Revolutionary Pinout 32-Lead Ceramic
AT24C01A/02/04/08/16. 2-Wire Serial CMOS E 2 PROM. Features. Description. Pin Configurations. 1K (128 x 8) 2K (256 x 8) 4K (512 x 8) 8K (1024 x 8)
AT24C01A/02/04/08/16 Features Low Voltage and Standard Voltage Operation 5.0 (V CC = 4.5V to 5.5V) 2.7 (V CC = 2.7V to 5.5V) 2.5 (V CC = 2.5V to 5.5V) 1.8 (V CC = 1.8V to 5.5V) Internally Organized 128
IS37SML01G1 IS38SML01G1
IS37SML01G1 IS38SML01G1 1Gb SLC-1b ECC 3.3V SERIAL NAND FLASH MEMORY WITH 104MHZ MULTI I/O SPI INTERFACE PRELIMINARY DATA SHEET 1Gb 3.3V SPI-NAND FLASH MEMORY WITH 104MHZ MULTI I/O SPI INTERFACE with 1b
A23W8308. Document Title 262,144 X 8 BIT CMOS MASK ROM. Revision History. Rev. No. History Issue Date Remark
Preliminary 262,144 X 8 BIT CMOS MASK ROM Document Title 262,144 X 8 BIT CMOS MASK ROM Revision History Rev. No. History Issue Date Remark 0.0 Initial issue November 11, 1999 Preliminary PRELIMINARY (November,
HT93LC46 CMOS 1K 3-Wire Serial EEPROM
CMOS 1K 3-Wire Serial EEPROM Features Operating voltage: 1.8V~5.5V Low power consumption Operating: 5mA max. Standby: 2µA max. User selectable internal organization 1K: 128 8 or 64 16 3-wire Serial Interface
SED1180F CMOS LCD 64-COMMON DRIVERS LCD CONTR 256SEG 64 COM DUTY: 1/64
CMOS LCD -COMMON DRIVERS DESCRIPTION The SED119 is a dot matrix LCD common (row) driver for driving high-capacity LCD panel at duty cycles higher than 1/. The LSI uses two serially connected, 32-bit shift
25AA160A/B, 25LC160A/B
Device Selection Table 25AAA/B, 25LCA/B 16K SPI Bus Serial EEPROM Part Number VCC Range Page Size Temp. Ranges Packages 25LCA 2.5-5.5V 16 Byte I,E P, SN, ST, MS 25AAA 1.8-5.5V 16 Byte I P, SN, ST, MS 25LCB
LP62S16256G-I Series. Document Title 256K X 16 BIT LOW VOLTAGE CMOS SRAM. Revision History. Rev. No. History Issue Date Remark
Preliminary 256K X 16 BIT LOW VOLTAGE CMOS SRAM ocument Title 256K X 16 BIT LOW VOLTAGE CMOS SRAM Revision History Rev. No. History Issue ate Remark 0.0 Initial issue June 2, 2006 Preliminary PRELIMINARY
EClamp2410P. ESD Protection Device for T-Flash/MicroSD Interfaces PRELIMINARY. PROTECTION PRODUCTS - EMIClamp TM Description.
- EMIClamp TM Description The EClamp TM 240P is a combination EMI fi lter and line termination device with integrated TVS diodes for use on Multimedia Card interfaces. This state-of-the-art device utilizes
64Mbit, 2MX32 3V Flash Memory Module
64Mbit, 2MX32 3V Flash Memory Module Features 3.0V ± 10% read and write operation 1,000,000 Block Erase Cycles Access Times: 70,90,120 &150ns 4X(32 Equal Sectors of 64-Kbyte Each) Package Options: Individual
MB85R K (32 K 8) Bit. Memory FRAM DS E CMOS DESCRIPTIONS FEATURES PACKAGES FUJITSU SEMICONDUCTOR DATA SHEET
FUJITSU SEMICONDUCTOR DATA SHEET DS05-13101-4E Memory FRAM CMOS 256 K (32 K 8) Bit MB85R256 DESCRIPTIONS The MB85R256 is an FRAM (Ferroelectric Random Access Memory) chip in a configuration of 32,768 words
CARDINAL COMPONENTS. Specifications: Min Typ Max Unit
Re-Configurable 6 Output CMOS TCXO Fixed & Re-Configurable Multi-Frequency Oscillator Intuitive software and I 2 C interface Easily update system Software flexible, quick upgrades and changes Industry-standard
AS6C6264 8K X 8 BIT LOW POWER CMOS SRAM REVISION HISTORY. Feb
REVISION HISTORY Revision Description Issue Date 1.0 Initial issue Feb 2007 2.0 Add-in industrial temperature option for 28-pin 600 July 2017 mil PDIP. Standby current(isb1) reduced to be 20uA for I-grade
AK6512CA SPI bus 64Kbit Serial CMOS EEPROM
AK6512CA SPI bus 64Kbit Serial CMOS EEPROM Features Advanced CMOS EEPROM Technology Single Voltage Supply: 1.8V to 5.5V 64Kbits; 8192 x 8 organization SPI Serial Interface Compatible High Speed Operation
512K bitstwo-wire Serial EEPROM
General Description The provides 524,288 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 65,536 words of 8 bits each. The device is optimized for use in many
S-2900A. Rev CMOS 512-bit SERIAL E 2 PROM
Rev.1.11 CMOS 512-bit SERIAL E 2 PROM S-29A The S-29A is a wide operating voltage range, low power consumption 512-bit E 2 PROM. The organization is 64-word 8-bit, and can be read or written serially.
256MB / 512MB / 1GB / 2GB
Description: TEKQ TSD133XXX is a new 133X Super Fast Performance mass-storage system based on innovations in semiconductor technology which designed in advanced SD specification Ver.1.1. It s a special
HT24LC02A CMOS 2K 2-Wire Serial EEPROM
CMOS 2K 2-Wire Serial EEPROM Features Operating voltage 1.8V~.V for temperature -40 C to +8 C Low power consumption Operation: ma max. Standby: 2μA max. Internal organization: 26 8 2-wire serial interface
24AA16/24LC16B. 16K I 2 C Serial EEPROM. Device Selection Table. Description: Features: Package Types. Block Diagram. Temp. Ranges.
6K I C Serial EEPROM Device Selection Table Part Number Features: Vcc Range Max. Clock Frequency Temp. Ranges A6.7-. 00 khz () I LC6B.-. 00 khz I, E Note : 00 khz for
8M-BIT, 16M-BIT AND 32M-BIT SERIAL FLASH MEMORY
8M-BIT, 16M-BIT AND 32M-BIT SERIAL FLASH MEMORY Formally NexFlash NX25P80, NX25P16 and NX25P32 The Winbond W25P80/16/32 are fully compatible with the previous NexFlash NX25P80/16/32 Serial Flash memories.
A24C02. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION provides 2048 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 256 words of 8 bits each. The device is optimized for use in many industrial and
8K X 8 BIT LOW POWER CMOS SRAM
February 2007 FEATURES Access time :55ns Low power consumption: Operation current : 15mA (TYP.), VCC = 3.0V Standby current : 1µ A (TYP.), VCC = 3.0V Wide range power supply : 2.7 ~ 5.5V Fully Compatible
S-2900A. Rev.1.1. CMOS 512-bit SERIAL E 2 PROM
Rev.1.1 CMOS 512-bit SERIAL E 2 PROM S-29A The S-29A is a wide operating voltage range, low power consumption 512-bit E 2 PROM. The organization is 64-word 8-bit, and can be read or written serially. It
AT28C16. 16K (2K x 8) CMOS E 2 PROM. Features. Description. Pin Configurations
Features Fast Read Access Time - 150 ns Fast Byte Write - 200 µs or 1 ms Self-Timed Byte Write Cycle Internal Address and Data Latches Internal Control Timer Automatic Clear Before Write Direct Microprocessor
ISSI IS25C02 IS25C04 2K-BIT/4K-BIT SPI SERIAL ELECTRICALLY ERASABLE PROM FEATURES DESCRIPTION. Advanced Information January 2005
2K-BIT/4K-BIT SPI SERIAL ELECTRICALLY ERASABLE PROM January 2005 FEATURES Serial Peripheral Interface (SPI) Compatible Supports SPI Modes 0 (0,0) and 3 (1,1) Low power CMOS Active current less than 3.0
A24C08. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION The provides 8192 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 1024 words of 8 bits each. The device is optimized for use in many industrial
Options. Data Rate (MT/s) CL = 3 CL = 2.5 CL = 2-40B PC PC PC
DDR SDRAM UDIMM MT16VDDF6464A 512MB 1 MT16VDDF12864A 1GB 1 For component data sheets, refer to Micron s Web site: www.micron.com 512MB, 1GB (x64, DR) 184-Pin DDR SDRAM UDIMM Features Features 184-pin,
256K x 16 4Mb Asynchronous SRAM
FP-BGA Commercial Temp Industrial Temp 256K x 16 4Mb Asynchronous SRAM GS74117AX 8, 10, 12 ns 3.3 V V DD Center V DD and V SS Features Fast access time: 8, 10, 12 ns CMOS low power operation: 130/105/95
FEATURES. Single Power Supply Operation - Low voltage range: 2.70 V V
FEATURES Single Power Supply Operation - Low voltage range: 2.70 V - 3.60 V - IS39LV040: 512K x 8 (4 Mbit) - IS39LV010: 128K x 8 (1 Mbit) - IS39LV512: 64K x 8 (512 Kbit) - 70 ns access time - Uniform 4
CARDINAL COMPONENTS. FREQUENCY A MHz. Specifications: Min Typ Max Unit
Re-Configurable 6 Output PECL TCXO Fixed & Re-Configurable Multi-Frequency Oscillator Intuitive software and I 2 C interface Easily update system Industry-standard packaging saves on board space Mult.
CARDINAL COMPONENTS. Specifications: Min Typ Max Unit
Re-Configurable 4 Output CMOS Oscillator Fixed & Re-Configurable Multi-Frequency Oscillator Intuitive software and I 2 C interface Easily update system Software flexible, quick upgrades and changes Industry-standard
Rev. No. History Issue Date Remark
128K X 8 BIT LOW VOLTAGE CMOS SRAM ocument Title 128K X 8 BIT LOW VOLTAGE CMOS SRAM Revision History Rev. No. History Issue ate Remark 0.0 Initial issue February 19, 2002 Preliminary 0.1 Add 32L Pb-Free
64K x 16 1Mb Asynchronous SRAM
TSOP, FP-BGA Commercial Temp Industrial Temp 64K x 16 1Mb Asynchronous SRAM GS71116AGP/U 7, 8, 10, 12 ns 3.3 V V DD Center V DD and V SS Features Fast access time: 7, 8, 10, 12 ns CMOS low power operation:
AS6C K X 8 BIT LOW POWER CMOS SRAM
REVISION HISTORY Revision Description Issue Date Rev. 1.0 Rev. 1.1 Initial Issue Add package 48-ball 8mm 10mm TFBGA Revised ORDERING INFORMATION in page 11 Jan.09.2012 July.12.2013 0 FEATURES Fast access
1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI - 1 - Preliminary - Revision H Table of Contents- 1. GENERAL DESCRIPTION... 4 2. FEATURES... 4 3. PIN CONFIGURATION
128Kx8 CMOS MONOLITHIC EEPROM SMD
128Kx8 CMOS MONOLITHIC EEPROM SMD 5962-96796 WME128K8-XXX FEATURES Read Access Times of 125, 140, 150, 200, 250, 300ns JEDEC Approved Packages 32 pin, Hermetic Ceramic, 0.600" DIP (Package 300) 32 lead,
ACE24AC02A1 Two-wire Serial EEPROM
Description The ACE24AC02A1 is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 256 words of 8 bits (1 byte) each. The devices
THM3060. Multiple Protocols Contactless Reader IC. Features. Pinning Diagram
THM3060 Multiple Protocols Contactless Reader IC Features Compatible with ISO/IEC 14443 A/B Support higher baudrate up to 848 Kbit/s Compatible with ISO/IEC 15693 Host interface selectable: UART,SPI and
IS62/65WVS1288FALL IS62/65WVS1288FBLL. 128Kx8 LOW VOLTAGE, SERIAL SRAM with SPI, SDI and SQI INTERFACE DESCRIPTION
128Kx8 LOW VOLTAGE, SERIAL SRAM with SPI, SDI and SQI INTERFACE JANUARY 2018 KEY FEATURES SPI-Compatible Bus Interface: - 16/20 MHz Clock rate - SPI/SDI/SQI mode Low-Power CMOS Technology: - Read Current:
IS62/65WVS5128GALL IS62/65WVS5128GBLL. 512Kx8 LOW VOLTAGE, FAST SERIAL SRAM with SPI, SDI and SQI INTERFACE KEY FEATURES DESCRIPTION
512Kx8 LOW VOLTAGE, FAST SERIAL SRAM with SPI, SDI and SQI INTERFACE JUNE 2018 KEY FEATURES SPI-Compatible Bus Interface: - 30/45 MHz Clock rate - SPI/SDI/SQI mode Single Power Supply: - VDD = 1.65V -
EMIF06-HSD04F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Features. Application.
6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Features Datasheet production data Figure 1. Pin configuration (bump side) Very low line capacitance to compensate long
Stereo PDM-to-I 2 S or TDM Conversion IC ADAU7002
Data Sheet FEATURES 64 decimation of a stereo pulse density modulation (PDM) bit stream to pulse code modulation (PCM) audio data Slave I 2 S or time division multiplexed (TDM) output interface Configurable
2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Description. Features. Block Diagram DATASHEET
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) or LVDS input pairs
EMIF06-USD14F3. 6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection. Applications. Description. Features.
6-line low capacitance IPAD for micro-sd card with EMI filtering and ESD protection Applications Datasheet production data Flip Chip (15 bumps) Consumer and computer electronics with micro-sd card such
2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Features
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) input pairs and
IS62/65WVS1288GALL IS62/65WVS1288GBLL. 128Kx8 LOW VOLTAGE, FAST SERIAL SRAM with SPI, SDI and SQI INTERFACE KEY FEATURES DESCRIPTION MAY 2018
128Kx8 LOW VOLTAGE, FAST SERIAL SRAM with SPI, SDI and SQI INTERFACE MAY 2018 KEY FEATURES SPI-Compatible Bus Interface: - 30/45 MHz Clock rate - SPI/SDI/SQI mode Single Power Supply: - VDD = 1.65V - 2.2V
512K x 8 4Mb Asynchronous SRAM
SOJ, TSOP, FP-BGA Commercial Temp Industrial Temp 512K x 8 4Mb Asynchronous SRAM GS74108ATP/J/X 8, 10, 12 ns 3.3 V V DD Center V DD and V SS Features Fast access time: 8, 10, 12 ns CMOS low power operation:
A24C64. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION provides 65536 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 8192 words of 8 bits each. The is optimized for use in many industrial and commercial
1GB microsd Memory Card. Description. Features. Placement. Pin Definition. Transcend Information Inc. 1
Description is a. It is non-volatile, which means no external power is required to retain the information stored on it. Besides, it is also a solid-state device that without moving parts to skip or break
ZD24C32A. I 2 C-Compatible (2-wire) Serial EEPROM. 32-Kbit (4,096 x 8) DATASHEET. Features. Description. Low Voltage Operation
I 2 C-Compatible (2-wire) Serial EEPROM 32-Kbit (4,096 x 8) DATASHEET Features Low Voltage Operation VCC = 1.7V to 5.5V Internally Organized as 4,096 x 8 (32Kb) Additional Write lockable page I 2 C-compatible
4Mbit, 512KX8 5V Flash Memory (Monolithic)
4Mbit, 512KX8 5V Flash Memory (Monolithic) Features 5V Programming, 5V±10% Supply TTL Compatible Inputs and CMOS Outputs Access Times: 90, 120 and 150ns Low Vcc Write Inhibit 3.2v 8 Equal Size Sectors
ISSI Preliminary Information January 2006
2K-BIT/4K-BIT SPI SERIAL ELECTRICALLY ERASABLE PROM January 2006 FEATURES Serial Peripheral Interface (SPI) Compatible Supports SPI Modes 0 (0,0) and 3 (1,1) Low-voltage Operation Vcc = 1.8V to 5.5V Low
1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI - 1 - Revision F Table of Contents 1. GENERAL DESCRIPTION... 4 2. FEATURES... 4 3. PIN CONFIGURATION SOIC 150-MIL...
80 SEGMENT DRIVER FOR DOT MATRIX LCD S6A2067 S6A SEG DRIVER FOR STN LCD
80 SEGENT DRIVER FOR DOT ATRIX LCD S6A2067 S6A2067 80 SEG DRIVER FOR STN LCD Jan. 2002. Ver. 0.1 Contents in this document are subject to change without notice. No part of this document may be reproduced
Modtronix Engineering Modular Electronic Solutions SBC28DC. Single board computer for 28 pin DIP PICs
Modtronix Engineering Modular Electronic Solutions Single board computer for 28 pin DIP PICs Table of Contents 1 Introduction...2 2 Features...4 3 Expansion Connectors...5 3.1 Daughter Board Connectors...5
4-Line BUS-Port ESD-Protection - Flow Through Design VBUS054CD-FHI VBUS054CD-FHI-GS
4-Line BUS-Port ESD-Protection - Flow Through Design Features Compact LLP2513-11L package Low package height
HCTL-2017 Quadrature Decoder/Counter Interface ICs
Products > Motion Control Encoder Solutions > Integrated Circuits > Decoder > HCTL-2017 HCTL-2017 Quadrature Decoder/Counter Interface ICs Description HCTL-2xxx series is a direct drop-in replacement for
93C76/86. 8K/16K 5.0V Microwire Serial EEPROM FEATURES DESCRIPTION PACKAGE TYPES BLOCK DIAGRAM
8K/16K 5.0V Microwire Serial EEPROM FEATURES PACKAGE TYPES Single 5.0V supply Low power CMOS technology - 1 ma active current typical ORG pin selectable memory configuration 1024 x 8- or 512 x 16-bit organization
2-Megabit (256K x 8) 5-volt Only CMOS Flash Memory AT29C020. Features. Description. Pin Configurations
Features Fast Read Access Time - 90 ns 5-Volt-Only Reprogramming Sector Program Operation Single Cycle Reprogram (Erase and Program) 1024 Sectors (256 bytes/sector) Internal Address and Data Latches for
Viking eusb. Embedded USB Manual ~ Industrial Products
Viking eusb Embedded USB Manual ~ Industrial Products Revision L Page 1 of 16 Revision History Date Revision Description X1 9/16/2014 Initial release on a modified PSFDUC3XXXXYXX_A1 (version 2 only). Revised
4Mb Async. FAST SRAM Specification
S6R4008V1M, S6R4016V1M, S6R4008C1M S6R4016C1M 4Mb Async. FAST SRAM Specification INFORMATION IN THIS DOCUMENT IS PROVIDED IN RELATION TO NETSOL PRODUCTS, AND IS SUBJECT TO CHANGE WITHOUT NOTICE. NOTHING
1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI Publication Release Date: June 21, 2007-1 - Revision L Table of Contents 1. GENERAL DESCRIPTION... 4 2. FEATURES...
HT1628 RAM Mapping LCD Driver
RAM Mapping 116 2 LCD Driver Features Logic voltage 2.4V~5.5V LCD operating voltage (VLCD) 2.4V~5.5V LCD display 2 commons, 116 segments Support a maximum of 58 4 bit Display RAM Duty Static, 1/2; Bias
PI4IOE5V bit general purpose outputs for 1MHz I 2 C bus
Features Operation power supply voltage from 2.3V to 5.5V 4-bit I 2 C-bus GPO 1 MHz I 2 C-bus interface with 30 ma SDA sink capability for 4000pF Latched outputs with 25mA capability for directly driving
t RP Clock Frequency (max.) MHz
3.3 V 32M x 64/72-Bit, 256MByte SDRAM Modules 168-pin Unbuffered DIMM Modules 168 Pin unbuffered 8 Byte Dual-In-Line SDRAM Modules for PC main memory applications using 256Mbit technology. PC100-222, PC133-333
CMOS Static RAM 1 Meg (128K x 8-Bit) Revolutionary Pinout
CMOS Static RAM 1 Meg (K x -Bit) Revolutionary Pinout IDT714 Features K x advanced high-speed CMOS static RAM JEDEC revolutionary pinout (center power/gnd) for reduced noise Equal access and cycle times
CMOS SRAM. K6T4008C1B Family. Document Title. Revision History. 512Kx8 bit Low Power CMOS Static RAM. Revision No. History. Remark. Draft Date 0.
Document Title 512Kx8 bit Low Power CMOS Static RAM Revision History Revision No. History Draft Date Remark 0.0 Initial Draft December 7, 1996 Advance 0.1 Revise - Changed Operating current by reticle
4M X 4 CMOS DYNAMIC RAM WITH EDO PAGE MODE. Rev. No. History Issue Date Remark
4M X 4 CMOS DYNAMIC RAM WITH EDO PAGE MODE Document Title 4M X 4 CMOS DYNAMIC RAM WITH EDO PAGE MODE Revision History Rev. No. History Issue Date Remark 0.0 Initial issue July 23, 2003 1.0 Remove 24/26-pin
SP1124T Discrete Unidirectional TVS Diode
SP1124T Discrete Unidirectional TVS Diode RoHS Pb GREEN Description This TVS diode is fabricated in a proprietary silicon avalanche technology and is used for high level protection of electronic equipment
ILI2303. ILI2303 Capacitive Touch Sensor Controller. Specification
Capacitive Touch Sensor Controller Specification Version: V1.03 Date: 2014/9/17 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Tel.886-3-5600099; Fax.886-3-5600055
IDT71016S/NS. CMOS Static RAM 1 Meg (64K x 16-Bit)
CMOS Static RAM 1 Meg (4K x 1-Bit) IDT711S/NS Features 4K x 1 advanced high-speed CMOS Static RAM Equal access and cycle times Commercial and Industrial: //2 One Chip Select plus one Output Enable pin
16-Bit Stereo Audio DAC & Headphone Driver Single Supply Voltage and Low Voltage Low Power Consumption 8.9mW Mute And Power Down Function VOL-IN
Single Supply Voltage and Low Voltage Low Power Consumption 8.9mW Mute And Power Down Function FEATURES Operation range: 2.5V~6.5V Excellent Power Supply Rejection Ratio(PSRR) Reduced pop-noise circuit
DDR SDRAM UDIMM. Draft 9/ 9/ MT18VDDT6472A 512MB 1 MT18VDDT12872A 1GB For component data sheets, refer to Micron s Web site:
DDR SDRAM UDIMM MT18VDDT6472A 512MB 1 MT18VDDT12872A 1GB For component data sheets, refer to Micron s Web site: www.micron.com 512MB, 1GB (x72, ECC, DR) 184-Pin DDR SDRAM UDIMM Features Features 184-pin,
DDR SDRAM SODIMM MT8VDDT1664H 128MB 1. MT8VDDT3264H 256MB 2 MT8VDDT6464H 512MB For component data sheets, refer to Micron s Web site:
SODIMM MT8VDDT1664H 128MB 1 128MB, 256MB, 512MB (x64, SR) 200-Pin SODIMM Features MT8VDDT3264H 256MB 2 MT8VDDT6464H 512MB For component data sheets, refer to Micron s Web site: www.micron.com Features
UMD 1423 UNITED MICRO DEVICE INC. Pi filter array with ESD protection. PRODUCT DESCRIPTION APPLICATIONS. This device has 20-bumps 4.
PRODUCT DESCRIPTION UMD1423 is a Pi filter array with TVS diodes for ESD protection. This device has six Pi filters integrated along with four channels of ESD protection. The Pi filters have values of
1. The values of t RCD and t RP for -335 modules show 18ns to align with industry specifications; actual DDR SDRAM device specifications are 15ns.
UDIMM MT4VDDT1664A 128MB MT4VDDT3264A 256MB For component data sheets, refer to Micron s Web site: www.micron.com 128MB, 256MB (x64, SR) 184-Pin UDIMM Features Features 184-pin, unbuffered dual in-line
VCC NC PROTECT DI DO. Table 1
Rev.1.11 CMOS SERIAL E 2 PROM Features Low power consumption Standby :0.8 µa Max. (V CC =5.5 V) Operating :0.8 ma Max. (V CC =5.5 V) 0.4 ma Max. (V CC =2.7 V) Low operating voltage range Write : 1.8 to
Digital "Mini" SiSonic TM Microphone Specification - Halogen Free. Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Digital "Mini" SiSonic TM Microphone Specification - Halogen Free Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 Sheet 1 of 11 1. DESCRIPTION AND APPLICATION 1.1 DESCRIPTION Digital "Mini" Surface
Industrial. Micro SD Card. Product Data Sheet
Industrial Micro SD Card Product Data Sheet 1 1. Introduction... 4 1.1. General Description... 4 2. Product Specifications... 5 3. Environmental Specifications... 7 3.1. Environmental Conditions... 7 3.2.
MB85R M Bit (128 K 8) Memory FRAM CMOS DS E DESCRIPTIONS FEATURES FUJITSU SEMICONDUCTOR DATA SHEET
FUJITSU SEMICONDUCTOR DATA SHEET DS05-13103-5E Memory FRAM CMOS 1 M Bit (128 K 8) MB85R1001 DESCRIPTIONS The MB85R1001 is an FRAM (Ferroelectric Random Access Memory) chip consisting of 131,072 words x
MOS INTEGRATED CIRCUIT
DATA SHEET 4M-BIT CMOS STATIC RAM 256K-WORD BY 16-BIT EXTENDED TEMPERATURE OPERATION MOS INTEGRATED CIRCUIT µpd444012a-x Description The µpd444012a-x is a high speed, low power, 4,194,304 bits (262,144
AZC002-04S Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
DDR SDRAM UDIMM MT16VDDT6464A 512MB MT16VDDT12864A 1GB MT16VDDT25664A 2GB
DDR SDRAM UDIMM MT16VDDT6464A 512MB MT16VDDT12864A 1GB MT16VDDT25664A 2GB For component data sheets, refer to Micron s Web site: www.micron.com 512MB, 1GB, 2GB (x64, DR) 184-Pin DDR SDRAM UDIMM Features
24AA01/24LC01B. 1K I 2 C Serial EEPROM. Description: Device Selection Table. Features: Package Types. Block Diagram. Part Number.
K I C Serial EEPROM Device Selection Table Part Number Features: Range Max. Clock Frequency Temp. Ranges AA0.7-. 00 khz () I LC0B.-. 00 khz I, E Note : 00 khz for
SBC65EC. Ethernet enabled Single Board Computer
Ethernet enabled Single Board Computer Table of Contents 1 Introduction...2 2 Features...3 3 Daughter Board Connectors...4 3.1 As a Daughter Board...5 3.2 Expansion boards...5 4 Interfaces...5 4.1 Ethernet...5
NAND32GW3F4A. 32-Gbit (4 x 8 Gbits), two Chip Enable, 4224-byte page, 3 V supply, multiplane architecture, SLC NAND flash memories.
32-Gbit (4 x 8 Gbits), two Chip Enable, 4224-byte page, 3 V supply, multiplane architecture, SLC NAND flash memories Features High-density SLC NAND flash memory 32 Gbits of memory array 1 Gbit of spare
CMOS SyncFIFO 64 X 9, 256 x 9, 512 x 9, 1,024 X 9, 2,048 X 9, 4,096 x 9 and 8,192 x 9
Integrated Device Technology, Inc. CMOS SyncFIFO 64 X 9, 256 x 9, 512 x 9, 1,24 X 9, 2,48 X 9, 4,96 x 9 and 8,192 x 9 IDT72421 IDT7221 IDT72211 IDT72221 IDT72231 IDT72241 IDT72251 FEATURES: 64 x 9-bit
PCMCIA / JEIDA SRAM Card
PCMCIA / JEIDA SRAM Card Product Specification June 2009 PRETEC/C-ONE Technology Corp. Corporate Headquarters 8F, NO5, Lane 345, Yang Guang St., Neihu, Taipei,Taiwan TEL: +886-2-2659-4380 Fax: +886-2-2659-4390