Absolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
|
|
|
- Shana Mills
- 5 years ago
- Views:
Transcription
1 Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations Electronic gear function Optional Protection against corrosion C-M EAM80 Kit with cable Technical data - electrical ratings Voltage supply Consumption typ. Initializing time Data currency VDC 20 ma (2 VDC, w/o load) 170 ms after power on <1 ms Interfaces CANopen, CANopen -Lift, CANopen + incremental Function Multiturn, Singleturn Profile conformity CANopen CiA communication profile DS 01, LSS Profil DSP 0, device profile DS 06, DS 17 Steps per turn 168 / 1 bit Number of turns 2621 / 18 bit Absolute accuracy ±0.1 (+20 ±1 C) ±0.2 ( C) (see info working distance) Sensing method Magnetic Code sequence CW: ascending values with clockwise sense of rotation; looking at flange Output stages CAN-Bus, LV (. V) compatible ISO11898 Incremental: linedriver RS22 or push-pull (option) Incremental output 102, 208, 096 ppr (other on request) Output signals A+, A-, B+, B- Output frequency 0 khz Interference immunity DIN EN Emitted interference DIN EN Technical data - mechanical design Size (flange) ø8 mm Shaft type ø6 mm (magnet bore) ø8 mm (magnet bore) ø12 mm (magnet bore) Protection DIN EN 6029 IP 67 Operating speed 6000 rpm Working distance 1.1 ±0.9 mm axial / 0. mm eccentricity Materials Housing: steel zinc-coated Flange: aluminium Operating temperature C (see general information) Relative humidity 9 % Resistance DIN EN Vibration 0 g, Hz DIN EN Shock 00 g, 1 ms Weight approx. 20 g Connection Flange connector M12, -pin Flange connector M12, 8-pin Cable 2 m 1 /9/2018
2 Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Part number EAM80-K Y A Resolution incremental signals 0 Without incremental signals H 096 pulses, TTL (RS22) pulses, TTL (RS22) 102 pulses, TTL (RS22) Resolution multiturn 00 No option bit Resolution singleturn 1 1 bit Voltage supply / signals C VDC / CANopen (DS06) C VDC / CANopen -Lift (DS17) B N L Connection Flange connector M12, 8-pin, radial, male contact, CCW* Flange connector M12, -pin, radial, male contacts, CCW Cable 2 m, radial Protection 7 IP 67 Magnet holder / bore diameter 6 ø6 mm 8 ø8 mm C ø12 mm Flange Y Synchro flange, flute ø mm, M/M * Only available for CANopen with incremental signals 2 /9/2018
3 Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Accessories Connectors and cables Female connector M12, -pin, straight, shielded, 2 m cable Female connector M12, -pin, straight, shielded, m cable Female connector M12, 8-pin, straight, shielded, 2 m cable Cable with male/female M12, -pin, straight, A-coded, 2 m (ESG C/KSGC) Cable with male/female M12, -pin, straight, A-coded, m (ESG C/KSGC) General information Self-heating correlated to installation and ambient conditions as well as to electronics and supply voltage must be considered for precise thermal dimensioning. Operating the encoder close to the maximum limits requires measuring the real prevailing temperature at the encoder flange. Terminal assignment Cable for connection reference -L Core colour W/o incremental With incremental white 0 V 0 V brown +Vs +Vs green CAN_H CAN_H yellow CAN_L CAN_L grey CAN_GND A+ pink n.c. A- blue n.c. B+ red n.c. B- Screen: connected to housing Cable data: x 2 x 0.1 mm 2 Flange connector M12, -pin for connection reference -N Pin W/o incremental 1 CAN_GND 2 +Vs 0 V CAN_H CAN_L 1 2 Flange connector M12, 8-pin for connection reference -B Pin With incremental 1 0 V 2 +Vs CAN_H CAN_L A+ 6 A- 7 B+ 8 B /9/2018
4 Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Output signals Incremental signals: clockwise rotating direction when looking at flange. A+ A- B+ B- Information working distance The ideal working distance of the magnet related to the encoder is at an eccentricity of 0 mm and an axial distance of 1.1 mm. Deviation affects the accuracy as shown in following diagram. Angular accuracy typ. [ ] CANopen features Operating modes Timer-driven (Event-Time) Synchronously triggered (Sync) Node Heartbeat Monitoring Node guarding Programmable parameters Diagnosis Default Trigger level RS22 Output level High Output level Low Load Push-pull Output level High Output level Low Load >2. V <0. V <20 ma +VS -2.2 V <0.7 V <20 ma At standard cable length up to 2 m Operating modes Total resolution Scaling Electronic gear function Multiturn sensing Position error Temperature exceeding Speed exceeding 0 kbit/s, Node ID 1 (DS06) 20 kbit/s, Node ID (DS17) 1.1 mm ±0.9 mm Axial 1.1 mm Eccentricity [mm] /9/2018
5 Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Dimensions EAM80 Kit, cable EAM80 Kit, M12 x M x 7 x ±0.9 ød H7 x 20 x M x ±0.9 9 ød H7 x M x 7 ø 2 ø 0 h7 ø 8 ø 0 h7 ø 8 1 x M x 7 ø 2 1 M12 x 1 /9/2018
Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
Absolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
Inclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
Inclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
MHAD 50 - HDmag. Features
MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust and wearless Protection IP 67 Large
Absolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
HMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
AMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
Absolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
Incremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
Absolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
Absolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
PRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
Incremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
DATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
Encoder WDGA 58A CANopen
Encoder WDGA 58A CANopen www.wachendorff-automation.com/wdga58acan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
Multiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
TECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)
Multiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
Absolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 38 Industrial draw-wire sensors wiresensor P5 analogue - Robust aluminium profile housing - Customised versions for OEM - Potentiometer, current
Speed switches Programmable, digital speed switch With incremental encoder HOG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed
TECHNICAL DATASHEET Absolute Motorfeedback Series AD 34
For brushless servo motors Light duty encoder Unique mounting concept: Save installation time and cost Mounting Depth: 25 mm (ST), 34 mm (MT) Up to 9 Bit ST - resolution + 2 Bit MT - resolution +20 C operating
DATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
Absolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
NOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
Encoder WDGA 36A CANopen
Encoder WDGA 36A CANopen www.wachendorff-automation.com/wdga36acan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
Absolute Shaft Encoders ACURO industry
Compact design Aids for start up and operation: diagnostic LED, preset key * with optical response, status information Output Tristate short circuit-proof Gray or Binary code Encoder monitoring Synchro
Speed switches Programmable, digital speed switch With incremental encoder POG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed
Product Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
MHAP HDmag. Features
Features MHP 200 - Version for axial screw mounting bsolute encoder with magnetic sensing and without bearings with integrated FPG signal processing bsolute resolution max. 17 bit singleturn dditional
ABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
Encoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
Encoders without bearings - incremental Magnetic sensing, through hollow shaft max. ø180 mm pulses or 128 sinewave cycles per turn
Features Sinewave or square-wave signals Robust and wearless High protection through fully encapsulated electronics Large tolerances: axial ±3 mm, radial max. 2.2 mm Very compact dimensions Simple mounting,
Standard CANopen/CANopenLift. RoHS. High protection level. High shaft load capacity. Flexible
CANopen/CANopenift The Sendix multiturn encoders 868 and 888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a
Encoder WDGA 58B CANopen
Encoder WDGA 58B CANopen www.wachendorff-automation.com/wdga58bcan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
Absolute Shaft Encoders ACURO industry
bsolute Shaft Encoders CURO industry Type C 58 Synchro flange Compact design: 5mm length for single or multiturn ids for start up and operation: diagnostic LED, preset key with optical response, status
Rotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track
Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,
Material: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
RoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
POG 10 + DSL. Features
Features Freely programmable on and off switching speed Programming via included software (RS485 interface) TTL or HTL, EURO-flange and/or housing foot 3 / solid shaft ø11 mm DSL.R: 3 outputs speed controlled
Analog output linear. Wear free, high resolution High shock resistance Servo flange mounting U8 I1
PTAM2 Robust Inclination Sensor with Analog Output Analog Inclination Sensor for 1 axis or 2 axes in MEMS technology Measurement range ±180 for 1 axis or ±60 for 2 axes class IP67 / IP69K Analog output
TECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
TECHNICAL DATASHEET Stainless Steel Encoders AC 59 / 61 - Parallel
Version AC 59 with cable outlet Compact design Protection class IP67 High corrosion resistance Robust design Resolution up to 26 Bit (14 Bit ST, 12 Bit MT) Gray or Binary code Encoder monitoring Output
ENC-IQ58S-H-PROG-ZCW-4-06-A-L1
IQ58/ IQ58S/ CKQ58 Hollow Shaft Magnetic Encoder Series FEATURES Programmable Incremental Encoder Resolution from 1 to 16384 PPR Selectable Index length 90 or 180 el. Push-Pull and Line Driver Compatible
More Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 42 Long distance draw-wire sensors wiresensor P200 digital - Robust aluminium profile housing - Customized versions for OEM - Incremental/absolute
Optical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH
TM Optical Absolute Encoder Singleturn or Multiturn with hollow shaft,, open, GX, G1, G2AMH / GX, G1, G2MMH Features Interfaces:,, open, Resolution: 13 bit singleturn, 29 bit multiturn Parameterizable
ENC-CKP58-H-PROG-ZCW-4-06-A-L1
IP58/IP58S/CKP58 Programmable Incremental Encoders FEATURES Programmable Incremental Encoder Resolution from 1 to 65536 PPR Voltage 5 VDC or 10-30 VDC Push-Pull and Line Driver Compatible Output IP 65
Robust precision. MAGRES EAM Magnetic absolute encoders.
Robust precision MAGRES EAM Magnetic absolute encoders. Proven robustness. Highest precision up to ±0.15. MAGRES absolute encoders are well-proven under harsh conditions all over the world. The new generation
More Precision. Draw-wire displacement sensors
More Precision wiresensor Draw-wire displacement sensors 4 Draw-wire sensors wiresensor MK77 analog - Robust plastic housing - Customized versions for OEM - Wire potentiometer Model MK77 Output P 34. ø8
DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER CANOPEN
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
Ø 58 mm, depth 48 mm Shaft dimension. Hollow Ø 15 mm, solid Ø 6 or 10 mm Shaft loading (axial and radial)
ABSOLUTE ENCODERS AMT58 SSI Multi-turn Line Standard dimension Ø58mm Hollow or solid shaft Very high resolution Very high accuracy APPLICATIONS -Motion control -Automated machinery -Length measurement
MAGNETIC ABSOLUTE MULTITURN
MAGNETI ABSOLUTE MULTITURN ompact Robust Standard Find on page F2 Find on page F15 Find on page F28 ompact, Magnetic Type RM-97/RM-98 Analog F2 Type RM-99/RM-100 SSI F7 Type RM-101/RM-102 ANopen F11 ompact,
ENCODER. CANopen Multiturn. Series , Key-Features:
ENCOER CANopen Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Solid Shaft... Order Code Blind Hollow Shaft... Technical ata... CANopen Interface...5 Connection...6 Technical drawing...7
NOVOHALL Rotary Sensor non-contacting. Series RSB-3600 Series RMB-3600
NOVOHALL Rotary Sensor non-contacting Series RSB-3600 Series RMB-3600 Special features Non-contacting, hall technology Measuring range up to 5760 Single- and multiturn True-power-on system: counts turns
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More Precision. Draw-wire displacement sensors
More Precision wiresensor Draw-wire displacement sensors 0 Draw-wire sensors wiresensor MK analog - Robust plastic housing - Customized versions for OEM - Wire/hybrid potentiometer Model MK Output P0/P5
ABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
Absolute multiturn encoder TRK/S3 with EtherCAT FSoE interface
Absolute multiturn encoder TRK/S3 with EtherCAT FSoE interface Document no.: TRK 13348 BE Date: 13.11.2015 Contactless, wear-free sensor system according to the Hall principle High vibration and shock
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
EAM PARALLEL - SSI MULTITURN ABSOLUTE ENCODER
EAM PARALLEL - SSI MULTITURN ABSOLUTE ENCODER ABSOLUTE MULTITURN PARALLEL ENCODER DESCRIPTION This series is designed for application where a very high precision is required, even also on extended linear
Encoder WDGA 58B SSI.
Encoder WDGA 58B SSI www.wachendorff-automation.com/wdga58bssi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
SSI GENERAL INFORMATION ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS
GENERAL INFORMA SSI ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS In many cases, the data transmitted from one system to another are subjected to magnetic fields and noise, by using standard interfaces,
Rotary Position Technology Incremental Encoders
-40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical
ABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL
ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.
Rotary Measuring Technology Absolute singleturn encoder shaft version
Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various
TECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
PARALLEL GENERAL INFORMATION PARALLEL AND PARALLEL PROGRAMMABLE ABSOLUT ENCODERS. BCD Code 2nd decade 1st decade. Dec Binary Code Gray Code
GENERAL INFORMA PARALLEL PARALLEL AND PARALLEL PROGRAMMABLE ABSOLUT ENCODERS The absolut encoders are widely employed throughout industry. Unlike incremental measurement systems, absolut encoders always
ABSOLUTE ROTARY ENCODER MIDI CANOPEN
Main Features - Compact and heavy-duty industrial design - Interface: CANopen / CAN - Housing: 58 mm Ø - Solid / hollow shaft: 6 or 10 mm Ø / 15 mm Ø - Max. 6556 steps per revolution (16 Bit) - Code: Binary
PLUTO. Safety-PLC. Manual Absolute encoders
PLUTO Safety-PLC Manual Absolute encoders 1 Table of contents: 1 General...3 1.1 Reaction time... 3 2 Electrical...4 2.1 CAN bus data... 4 3 Singleturn encoder RSA 597...5 3.1 Address setting... 5 3.2
DATA SHEET ABSOLUTE MAGNETIC ROTARY ENCODER HEAVY DUTY SAE J1939
POSITAL absolute magnetic rotary encoders are available with interface. These heavy duty encoders are designed for mobile machinery and other demanding environments. An IP69K environmental rating results
LENORD. +BAUER... automates motion. Magnetic absolute rotary encoder GEL 235. Technical information Version General. Features.
Magnetic absolute rotary encoder GEL 25 LENORD +BAUER... automates motion. Technical information Version 02. General Absolute rotary encoder with a maximum total resolution of 28 bits in a compact design
ABSOLUTE OPTICAL ROTARY ENCODER SINGLETURN BIT PARALLEL
Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit Parallel, Push Pull, Short Circuit Proof Housing: 58 mm - Shaft: 6 or 10 mm hollow- 15 mm - Resolution: Max. 16 Bit = 65,56 Steps
Data Sheet MEM 22. Absolute Encoder Multiturn
Absolute Encoder Multiturn Features Resolution: Singleturn: up to 16,384 (14 Bit) steps per revolution Multiturn: up to 16,777,216 (24 Bit) revolutions Interface: SSI (synchron serial interface) or BiSS
Encoders. Rotary Encoders Incremental/Absolute Linear Encoders Motor Feedback Systems PRODUCT CATALOGUE 2009/2010
PRODUCT CATALOGUE 2009/2010 Encoders Rotary Encoders Incremental/Absolute Linear Encoders Motor Feedback Systems This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com
Robust precision. MAGRES EAM Magnetic absolute encoders.
Robust precision MAGRES EAM Magnetic absolute encoders. Proven robustness. Highest precision up to ±0.15. MAGRES absolute encoders are well-proven under harsh conditions all over the world. The new generation
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Encoder WDGA 36A SSI.
Encoder WDGA 36A SSI www.wachendorff-automation.com/wdga36assi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
Rotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
TECHNICAL DATASHEET Incremental Encoder RI 58-F
Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications
ENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 30 Industrial draw-wire sensors wiresensor P60 analog - Robust aluminum profile housing - Customized versions for OEM - Potentiometer, current
More Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 8 Low-cost draw-wire displacement sensors wiresensor MK60 analog - Robust plastic housing - Customised versions for OEM - Potentiometer, current
Absolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
Rotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
BTF/PRF: Absolute and incremental wire draw encoders for measuring lengths up to 50 m.
BTF/PRF: Absolute and incremental wire draw encoders for measuring lengths up to m. The combination of the wire draw mechanism and absolute or incremental encoders manufactured by SICK-STEG- MANN enables
Absolute encoders multiturn
PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these
Absolute encoder TBD/TRD with PROFIBUS-DP interface
with PROFIBUS-DP interface Document no.: TRD 11868 LE Date: 15.02.2016 Singleturn and multiturn versions Contactless, wear-free sensor system according to the Hall principle High vibration and shock resistance