Wiper AY Profile. AY Profile, Premium Double-Lipped Wiper. Technical Data.
|
|
- Ilene Melton
- 5 years ago
- Views:
Transcription
1 Wiper Y Y, Premium Double-Lipped Wiper Catalog PS 5370/US The Y profile can be used as a heavy to light duty wiper. When used in high pressure applications in conjunction with the proper Parker rod seals, the Y compliments the sealing system by providing an additional beveled sealing lip, yielding excellent film-breaking and the driest rod sealing available. These dual acting features also enable it to be used by itself in low pressure applications as both the rod seal and the wiper. Knife-trimmed sealing lips ensure the best possible film breaking. IMPORTNT: When using the Y wiper in conjunction with other rod seals, it is important to select a rod seal profile that enables pressure relief of fluid into the system, otherwise a pressure trap may form between the wiper and rod seal. Suggested rod profiles are the BT, BS, and B3 u-cups. Technical Data Standard Temperature Surface Materials* Range Speed P to 275 <1.6 ft/s (-54 C to 135 C) (0.5 m/s) P to 225 <1.6 ft/s (-37 C to 107 C) (0.5 m/s) P to 200 <1.6 ft/s (-54 C to 93 C) (0.5 m/s) *lternate Materials: or applications that may require an alternate material, please contact your local Parker Seal representative. Y Cross-Section Y installed in Gland -19
2 Catalog PS 5370/US Y Part Number Nomenclature Y Table -12. Y Inch Y Seal Compound 4-Digit Material Code xample: 4300 = 90 Resilon 4300 Polyurethane Nominal (x1000) xample: 1.75 x 1000 = Part Number Nomenclature Y Table -13. Y Metric M Y Seal Compound 4-Digit Material Code (irst digit 4 replaced with M for Metric) xample: M300 = 90 Resilon 4300 Polyurethane Gland Depth (mm) or Seal Nominal Radial Cross-Section xample: 04.0 = 4.0mm Seal Nominal I.D. (mm) xample: 035 = 35mm Seal Nominal Width (mm) xample: 4.5 = 4.5mm Gland Dimensions Y Inch Y gland dimensions are provided in Table -15 on page -23. Gland Dimensions Y Metric Y gland dimensions for metric sizes are provided in Table -16 on page /01/12-20
3 Wiper H and 600 s Catalog PS 5370/US H and 600 s, Performance Double-Lip Wiper Parker s H and 600 style wipers are double-lip excluders sharing identical geometries for combining the actions of rod sealing and wiping. H wipers, available in plastic compounds, are intended for medium pressure hydraulic applications as a redundant rod seal or for low pressure systems as the sole rod seal and wiper. 600 wipers, available in rubber compounds, are typically used for pneumatic cylinders where lower friction is required. s with the H wiper, the 600 can be used in tandem with another rod seal or by itself as a dual-acting sealing/wiping unit. IMPORTNT: When using H and 600 wipers in conjunction with other rod seals, it is important to select a rod seal profile that enables pressure relief of fluid into the system, otherwise a pressure trap may form between the wiper and rod seal. Suggested rod profiles are the BT, BS, B3, 400, 500 and 5 u-cups. Technical Data H / 600 Cross-Section Standard Temperature Surface Materials* Range Speed P (H) -65 to 200 <1.6 ft/s (-54 C to 93 C) (0.5 m/s) P5065 (H) -70 to 200 <1.6 ft/s (-57 C to 93 C) (0.5 m/s) N4110 (600) -40 to 250 <3.3 ft/s (-40 C to 121 C) (1.0 m/s) *lternate Materials: or applications that may require an alternate material, please contact your local Parker Seal representative. H and 600 installed in Gland -21
4 Catalog PS 5370/US H and 600 s Part Number Nomenclature H and 600 s Table -14. H and 600 s Inch H Seal Compound 4-Digit Material Code xample: 4615 = Molythane 411 = Nitrile Nominal (x1000) xample: 1.25 x 1000 = Gland Dimensions H and 600 s H and 600 gland dimensions are provided in Table -15 on page
5 Wiper Y, H and 600 Gland Dimensions Catalog PS 5370/US Gland Dimensions Y, H and 600 s Inch Y H and 600 Please refer to ngineering Section 2, page 2- for surface finish and additional hardware considerations. Table -15. Y, H and 600 Gland Dimensions Inch B C Width D Shoulder Max. Wiper xial Width Throat Code (X = Standard Offering) Y H 600 Compound Code Part Number +.000/ / / / / x x XXXX xxxx x x XXXX xxxx x x XXXX xxxx x x XXXX xxxx x x x XXXX xxxx x x XXXX xxxx x x x XXXX xxxx x x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx or custom groove calculations, see ppendix C. Size -23
6 Catalog PS 5370/US Y, H and 600 s Table -15. Y, H and 600 Gland Dimensions Inch (Continued) B C Width D Shoulder Max. Wiper xial Width Throat +.000/ / / / /-.000 Code (X = Standard Offering) Y H 600 Compound Code Part Number x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x XXXX xxxx x x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x XXXX xxxx x x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x XXXX xxxx x XXXX xxxx x XXXX xxxx x x XXXX xxxx x XXXX xxxx x x XXXX xxxx x XXXX xxxx x x x XXXX xxxx x XXXX xxxx x x XXXX xxxx x XXXX xxxx x x XXXX xxxx x XXXX xxxx x XXXX xxxx x XXXX xxxx x x XXXX xxxx x XXXX xxxx x XXXX xxxx x XXXX xxxx x XXXX xxxx x x XXXX xxxx x XXXX xxxx x XXXX xxxx x XXXX xxxx x x XXXX xxxx or custom groove calculations, see ppendix C. Size -24
7 Table -15. Y, H and 600 Gland Dimensions Inch (Continued) B C Width D Shoulder Max. Wiper xial Width Throat +.000/ / / / /-.000 Code (X = Standard Offering) Y H 600 Catalog PS 5370/US Y, H and 600 s Compound Code Part Number x XXXX xxxx x XXXX xxxx x XXXX xxxx x XXXX xxxx x x XXXX xxxx x x XXXX xxxx x XXXX xxxx x XXXX xxxx x x XXXX xxxx x XXXX xxxx x x XXXX xxxx / / / / / x XXXX xxxx x x XXXX xxxx x XXXX xxxx x XXXX xxxx x x XXXX xxxx x x XXXX xxxx or custom groove calculations, see ppendix C. NOT: or sizes larger than those shown in the table, please contact your local Parker Seal representative. Size -25
8 Catalog PS 5370/US Y, H and 600 s Gland Dimensions Y, H and 600 s Metric Y H and 600 Table -16. Y Gland Dimensions Metric Please refer to ngineering Section 2, page 2- for surface finish and additional hardware considerations. B C Width D Shoulder Max. Wiper xial Width Throat f7 H /-0.0 H11 H or ISO tolerances refer to ppendix. Compound Code Part Number M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y M300 Y
Rod Seal OR Profile. OR Profile, Rotary PTFE Cap Seal
Seal, Rotary PTFE ap Seal atalog EPS 370/US The Parker OR profile is a bi-directional rod seal for use in pneumatic and low to medium duty rotary or oscillating applications. The OR profile is a two piece
More informationInch / Cross Type Metric Section Style Material Page. Inch Deep Style 92 Durometer Urethane with 70 Durometer Nitrile Energizer
Hydraulic Seals Inch / Cross Type Metric Section Style Material Page Standard 92 Durometer Urethane 7-11 with 70 Durometer Nitrile Energizer Inch Deep Style 92 Durometer Urethane 12-16 with 70 Durometer
More information! WARNING: OFFER OF SALE.
! ARNING: Failure, improper selection or improper use of the products and/or systems described herein or related items can cause death, personal injury or property damage. For safe and trouble-free use
More informationWear Rings / Bearings
Wear Rings / Bearings atalog EPS 5370/US ontents Engineering... -2 Materials... -4 Product Offering... -6 Wear Rings / Bearings Profiles WPT... -7 WRT... -11 WN... -14 PT... -18 PW... -27 Parker offers
More informationAS-568B Standard O-Rings Quick Reference Chart
AS-568B Standard O-Rings Quick Reference Chart General Applications Apple O-Rings are available in a choice of seven basic materials (1) each in a range of optional Durometer (Shore A) Hardnesses. Other
More informationPOLYPAC - BALSELE. - Single Acting - Compact Seal - Without and with Back-up Ring - Material - Fabric Reinforced NBR + POM Busak+ Shamban
contents (catalogue) main menu product range fullscreen/variable R POLYPAC - BALSELE - Single Acting - Compact Seal - Without and with Back-up Ring - Material - Fabric Reinforced NBR + POM 63 64 Balsele
More informationExcellent in separation of two different fluids under pressure Compact design and groove structure allow interchangability with the Hallite P54
PISTON SEAL Double-Acting TECHNICAL DETAILS The Hallite GPS is a double-acting piston seal utilizing Hallite s high-performance Armorlene HLX PTFE paired with an elastomer energizer and x-ring for optimum
More informationType A. Rubber O.D., metal insert, sprung single lip type. shaft seal
B A R N W E L L R O T Rubber O.D., metal insert, sprung single lip type shaft seal Rubber O.D., metal insert, sprung single lip type shaft seal A R Y Type A Type A This is by far the most commonly used
More informationDouce Hydro. Serie DHI - MT4 - Center trunnion mounting - 1 -
Standard specifications: Heavy duty hydraulic cylinders - 3000 PSI Square head industrial cylinders Mounting dimensions: NFPA specifications and ANSI/B93.1 191 Serie DHI - MT - Center trunnion mounting
More informationFOR TUBE FITTINGS OR-910N OR-910NA 5/8" 7/8" ".097" 11/16".863".116" 318-A02-1C. STOCKED O-RINGS in SPECIAL COMPOUNDS
FOR TUBE FITTINGS O-Ring Seals - Nitrile / Neoprene oints toriques d'étanchéité nitrile / néoprène can supply the right NITRILE O-Ring to suit YOUR purpose. The Nitrile O-Rings listed below are made especially
More informationSeries VH Hydraulic Cylinders
Series VH Series VH very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
More informationICD Parker Configuration System Quick Reference Guide
Model Number 4.00BB2HLU14A5.000 1.00 R1.75 R1.63 2H Heavy Duty Hydraulic Tie Rod Cylinders English Model Number 4.00BB2HLU14A5.000 LIST $1297.35 LIST $1297.35 (UNITED STATES DOLLAR) +.000 2.374 -.002 1.750
More informationSeries VH Hydraulic Cylinders
Series H Series H very heavy-duty hydraulic cylinders are premium quality cylinders with operating capacities of,000 PSI. They fully meet NPA standards. And to make sure every cylinder is premium-quality,
More informationPISTON SEALS BECA
PISTON SEALS BECA 500-502-504 DESCRIPTION The BECA 500-502 - 504 profiles are double acting composite piston seals composed of a filled PTFE friction ring and pre-tightened rubber O'Ring. They can be assembled
More informationData is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
More informationSpeed Controller with Fixed Orifice
P.G.Information (Specialized product) SP043M-025E P: JO Speed Controller with Fixed Orifice AS****-X250 Feature 1: 0.12mm SMC CORPORATION 1-16-4 Shimbashi, Minato-ku Tokyo 105-0004, JAPAN URL: http://www.smcworld.com
More informationClamping Systems. PClamp. PClamp N. PClamp E. Gewährleistung. Inhalt. RotoClamp. DiskClamp. LinClamp. PClamp
Gewährleistung Inhalt N dvantages 1 Pneumatic clamping with high forces General information 2 Optimum safety clamping pneumatic failure locks the system The performance of hydraulic clamps will be achieved
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationMechanical and adapters
Pneumatic expansion shafts Mechanical expansion shafts Expansion couplings Expansion chucks and adapters Friction and knife shafts Shaft handling Expansion chucks and adapters E X P A N S I O N U N I T
More informationPIG REPLACEMENT PARTS
PIG REPLACEMENT PARTS C - Scraper 2-14 Pg. 7-2 C - Scraper 16-48 Pg. 7-3 C - Sealer 3-14 Pg. 7-4 C - Sealer 16-48 Pg. 7-5 C - Guide 3-14 Pg. 7-6 C - Guide 16-48 Pg. 7-7 JC - Jetted 2-14 Pg. 7-8 JC - Jetted
More informationStainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
More informationISO 9001 CERTIFIED. Vacuum Technology. Magic Suction Cup.
ISO 9001 CERTIFIED Vacuum Technology Magic Suction Cup Magic Suction Cup Bellows cartridge (B1.5/20, B1.5/40 B2.5/20, B2.5/40) No Bellow distortion by vacuum pressure when grab the object Sealing Lip X
More informationDouble piston cylinder, Series TWC Ø6-32 mm double-acting with magnetic piston cushioning: elastic
Bosch Rexroth AG Pneumatics Ambient temperature min./max. +0 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston forces
More informationNon-Drip Quick Connect Couplings
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications
More informationBelts. Features. 121 CPT 2010 issue 3 (15.10)
Belts Features V and Wedge Belts comply with ISO, BS, DIN and RMA standards Factory complies with ISO 9001 standards High quality polyester cords used to ensure minimum stretch Wide range of international
More informationMALE THREAD SPECIFICATIONS
MALE THREAD SPECIFICATIONS PARALLEL MALE THREADS M20 Thread type BSP-m BSP-m BSP-m BSP-m Metric Seal method ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 9974-3 Designation thread ISO 228-1 ISO 228-1
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. R-Series Models RP and RH Synchronous Serial Interface (SSI) Output
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors Models RP and RH Synchronous Serial Interface () Output SENSORS Document Part Number 550989 Revision E Data Sheet Model RP Profile-style
More informationApplication Notes for Team Hydrostatic Pad Bearings
Application Notes for Team Hydrostatic Pad Bearings THESE COMMODITIES, TECHNOLOGY, OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY
More informationCompact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
More informationNon-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid
More informationRA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
More informationLift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
More informationConnect. Electricians' tools, consumables and enclosures x 210.0mm x 210.0mm. 26.0mm. 6.0mm. 6.0mm. 6.0mm. 12.0mm.
Connect Electricians' tools, consumables and enclosures Tooling and consumables which includes hand tools, crimping tools and solar tools for MC3 & MC4 connectors, electrical insulation tapes, cable pulling
More information7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
More informationUniversal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More informationConnect Electricians' tools, consumables and enclosures
Connect Electricians' tools, consumables and enclosures 220 Tooling and consumables including electricians' hand tools, electrical insulation tapes, cable pulling socks, morse hole saws & accessories
More informationThis is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
More informationMatting. Traction & Products
Matting Traction & Products Table of Contents Section Page Traction & Matting Products...5-11 Accessories...5 Bathtub Strips...5 Coarse Tread...6 Conformable Tread...6 Fine Resillient Tread...7 General
More informationLCC Pump Series - Wear Resistant, High Performance Slurry Pumps
LCC Pump Series - Wear Resistant, High Performance Slurry Pumps 02 LCC Pump Series Solutions for the most Abrasive and Corrosive Slurry Applications With High Performance Wear Resistance, the GIW Minerals
More informationThe HELLE Log Turner
The HELLE Log Turner Equipment may vary from what is pictured. PARTS MANUAL HELLE Sawmill Equipment Mfg. by Sawmill Hydraulics, Inc. 1-800-245-2448 www.4helle.com 1 HYDRAULIC DRIVE MOTOR SPROCKET PART
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More informationList Price. Part Number $
277 style 573 hytrel Molded of 55D Durometer Hytrel, these provide excellent extrusion resistance and tolerance to fluids such as phosphate esters, hydraulic oil and water. Stretched for installation,
More informationA Sprinkler System Hydraulic Analysis
Exercise 13 A Sprinkler System Hydraulic Analysis Objective: Model a schematic of a home sprinkler system. Use microfunctions to apply pressure varying mass flow functions at the sprinkler heads. Run a
More informationPL Nickel-Plated Brass Spigot Fitting Range
P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary
More informationQuality Since 1935 SERIES EXPANSION JOINTS WON T
1-00-25-00 Quality Since 135 SERIES 0EZ EXPANSION JOINTS THEY PERFORM LIKE WON T YOU BELIEVE THE EVOLUTION OF ELASTOMERIC EXPANSION JOINT STYLES Standard Arch (The 130 s) Flowing Arch (The 170 s) Wide
More informationBUILT RIGHT - PRICED RIGHT BUILT RIGHT - PRICED RIGHT. SEALERS w/hot wire seal systems EASTEY SEALER SPECIFICATIONS
EASTEY SEALER SPECIFICATIONS EM-T SERIES: MANUAL L-Sealer with powered takeaway conveyor, magnet clamping, cycle timing, pin perf, film clamps, base and spare parts. MACHINE POWER REQUIREMENTS SEAL DIMENSIONS
More informationStandard Bellows Metering Pumps
Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 23748 First edition 2016-10-01 Aerospace series O-ring grooves Dimensions Série aérospatiale Gorges pour joints toriques Dimensions Reference number ISO 23748:2016(E) ISO 2016
More informationHD 1703 NT Standard Tonnage Press Brake
HD 1703 NT Standard Tonnage Press Brake With models varying in capacity from 88-243 tons, Amada s new HD NT press brake series can handle a full range of applications in bend lengths from 101 to 161 inches.
More information4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog
For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire
More informationRK-5 ENVIRONMENTAL DATA CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED CONNECTION. Main features
RK-5 CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER WITH FLANGED CONNECTION (ANALOG OUTPUT) Main features Absolute transducer Stroke: 50 to 2500mm Direct analog output (RK-5 N/K/E) Inverse analog
More informationPremium Ice Cream Packages
Premium Ice Cream Packages Upgrade your existing packaging, or choose custom packaging we can design and mold individualized packages in virtually any size or shape that will make your product hot in the
More informationGoTo Europe Focused Delivery Program
GoTo Europe Focused Delivery Program Product Produktübersicht Overview Lineartechnik Motion Technology 2 GoTo Europe The products I need when I need them In today s global competition every day counts.
More information10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationMini Slides DGSL Metric Series Overview
Mini Slides DGSL Metric Series Overview High load capacity and positioning accuracy Maximum flexibility thanks to eight sizes Guide unit with high linear and parallel precision Simple coarse adjustment
More informationSB 52. Spare parts list. Hydraulic breakers Atlas Copco Construction Tools AB No e
SB Spare parts list Hydraulic breakers 0 Atlas Copco Construction Tools AB No. 900 09 0e 00 SB Contents Contents General information................................................................ Spare
More informationBellows. Technical Principles Bellows
Technical Principles Bellows Bellows Technical Principles Bellows 704 Use of Bellows 706 Products Products 710 Design Types 711 Freudenberg Simrit GmbH & Co. KG Technical Principles 703 Technical Principles
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More informationimag 4700 Series FLANGED MAGMETER
p r (Remote Display) RIGHT METER FOR Water & Wastewater Treatment Municipal Pump skids Pump stations Packaged plants Filtration systems Reclaimed water Hydraulic fracturing -300 Features Easy setup Minimal
More informationFEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved IP68 rated
s Flow Meters & Controls ECO FLOMAG i M A G S e r i e s o M o vi n g P a r t N NSF Certified to NSF/ANSI 61 FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal
More informationQuick Coupling Products
Quick oupling Products Quick ouplings, Swivels, Valves, iagnostic Equipment atalog 3800 US February 2014 Quick oupling ivision Locations Grantsburg, WI hetek, WI Union ity, P FILURE OR IMPROPER SELETION
More information72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
More informationData Sheet. JS6000 Joystick Base
Data Sheet JS6000 Joystick Base Mobile Machine Management The JS6000 joystick base is an element of the flexible, powerful, expandable, and affordable joystick family of mobile machine management products.
More informationSCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 kn to 6 kn / 35 lbs. to 13,49 lbs. SCHMIDT PneumaticPresses consist of a modular system suitable for optimal transforming, joining and assembling operations within the pressing
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES
More informationEPX2555 Advantage Series Piston Pump
EPX Advantage Series Piston Pump Owner s Manual Do not use this equipment before reading this manual! Model Numbers: 00 Upright Cart Complete 00 Low Boy Cart Complete NOTE: This manual contains important
More informationQUICK RELEASE COUPLINGS
QUICK RELEASE COUPLINGS Cross Reference C.01 Catalogue C.3 ~ C13 Quick Release Couplings Interchange Chart PART NO Series Page Faster Parker Aeroquip Safeway DNP Ryco Stucci Hansen Tema QOV C.03 NV 4000
More informationProduct Catalog Tapered & Spherical Roller Bearings Self Aligning Ball Bearings The most affordable quality in the world >>
Product Catalog Tapered & Spherical Roller Bearings Self Aligning Ball Bearings The most affordable quality in the world >> Bearing offers a full range of products to a variety of industries. From agriculture
More information4000 series Industrial resistive joysticks
CABLE TECHNICAL Distinctive features and specifications Two standard mounting options Low current drain Variety of potentiometer options Robust All metal mechanism IP65 above panel Inherently immune to
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC
More information35S-1 HB 3 HB 2 35S-1. Mounting style. Basic style. Standard type. Switch Set. Type. Nominal pressure Maximum allowable pressure Proof test pressure
f f f f f f Type Nominal pressure Maximum allowable pressure Proof test pressure Minimum operating pressure Working speed range Standard type. MPa 4 MPa MPa Switch Set fff. MPa.1 MPa to mm/s Working temperature
More informationBulletin 871D Cylinder Position Inductive Style
Bulletin 871D Cylinder Position Inductive Style Description Bulletin 871D cylinder position inductive proximity sensors are self-contained solid state devices. These devices are designed for sensing metal
More informationClamps with RUBBER BUSHING
Clamps with RUER USHING Order Codes p 34 Dimensions p 34 CLAMPS WITH RUER USHING Mounting example p 37 STANDARD SERIES CLAMPS WITH RUER USHING Order Codes PIPE CLAMPS AND RUER USHING MATERIAL (two clamp
More informationDIN Molded Cable Assemblies
DIN 43650 Telephone (973) 586-500 FAX (973) 596-590 DIN 43650 8mm For Solenoid Valve Applications Black PVC Cable & Connector DUAL JUMPED GROUND PINS Molded cable assemblies can be mounted with cable exiting
More informationCompression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
More informationBEST DEALS. TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! HexagonMI.com TESAtechnology.
BEST DEALS TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! Valid until 04.30.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationMINIATURE Z-AXIS HALL EFFECT JOYSTICK
MINIATURE Z-AIS HALL EFFECT With Pushbuttons Z-Axis Without Pushbuttons The Z-Axis Miniature Series Hall Effect Joystick allows for a 6 rotational movement of the knob at the top of the joystick. Z-Axis
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend
More informationProduct overview. Filter elements. ISO and EN 779. Technical data according to
Product overview Filter elements Technical data according to ISO 16890 and EN 779 Status of the data: 19.06.2018 PG Seite 5 Filter media 5.1 FMC Automatic roll filter media 8A 5 5.2 FMR Roll media 8A 6
More informationTelephony Multi-Taps. 9000T-TP Series
9000T-TP Series The 9000T-TP series 1 GHz twisted-pair power multi-tap taps off part of its input RF and AC, but lets the rest pass through. It divides the tapped-off signal and power into multiple outputs,
More informationDistribution by: i tape with CARTON SEALING TAPE. brand
Distribution by: TM i tape with CARTON SEALING TAPE brand Carton Sealing Tape IPG offers full line of pressure-sensitive carton sealing tape with all three adhesive technologies: acrylic, hot melt and
More informationSENSOR MUT2200EL. Electromagnetic flowmeter. The electromagnetic flowmeter for all applications DS100-1-USA
SENSOR MUT2200EL Electromagnetic flowmeter The electromagnetic flowmeter for all applications DS100-1-USA Sensor MUT2200EL MUT2200EL sensors represent the state of the art of Euromag International production
More informationAmphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
More informationc) Determine that the temperature range is acceptable. b) Determine what fluid compatibility is necessary.
Specifications and Properties To select a suitable replacement O-ring: 1) Always try to obtain recommended part # from manufacturers parts manual or service documentation. 2) Call equipment manufacturer
More informationPackaging. Carton Sealing Strapping Pallet Wrap Dispensers
Packaging Carton Sealing Strapping Pallet Wrap Dispensers 48 CARTON SEALING All of Electro Tapes carton sealing tapes feature a non-yellowing and UV resistant acrylic based adhesive system carried on conformable
More informationThickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationDM28 - Economical Digital Process and Strain Gauge Panel Meters
DM28 - Economical Digital Process and Strain Gauge Panel Meters TRANSDUCERS Easily scaled in any engineering units from -19999 to 99999 Large 18mm (.71 ) high red or green display Front panel MIN, MAX
More informationSubmersible Pumps. Pumping Solution. 50 Hz
Submersible Pumps Pumping Solution 0 Hz INTRODUCTION Submersible bore well pumps for (DN 0 mm), (DN 0 mm), (DN 0 mm), (DN 00mm), (DN 0 mm) and (DN 00 mm) wells. Sized for connection to the motor according
More informationTimken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
More informationSpare parts list. Forward and reversible plate MV 220, Valid from serial number. MV 245 Hatz Electric start
Spare parts list Forward and reversible plate MV 0, MV 0 Honda MV Hatz Electric start MV 0 Honda MV Hatz Electric start Valid from serial number 0000 0000 BGF000000 BGF000000 www.cp.com MV 0, 00 0 0c MV
More informationContents. Directional Control Valve 2 Series EPCV 452. Page 3. General Information. Page 4-5. Technical data. Page 6. Performance Curves.
Contents Page 3 Page 4-5 Page 6 Page 7 Page 8 Page 9 Page 10 General Information Technical data Performance Curves Dimensions : Hydraulic Valve and Accumulator Hydraulic Schematics Dimensions : Electrical
More informationIndex. E Expanded Metal Raised Flattened Grating... 93
Index A Aluminum Angle... 0 Channel... 07 Flat... 0 Hexagon... 0 Pipe... 0 Plate... 99 Round... 0 Sheet... 9 Square... 0 Tread Plate (Floor/Diamond Plate)... 00 Tube... 09 Angle Aluminum... 0 Bar Size...
More informationStandard Cartridge Valves 2/2 Way Series NG16 NG100
Standard Cartridge Valves Way Series NG NG Table of Contents Designation Symbol Page General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves
More informationMini Bellows Pumps. 180 Hines Ave. Bellville, OH PH: FAX:
Mini Bellows Pumps Mini Bellows models are ideal for low flow, low pressure metering applications. The pump is constructed entirely of plastic and utilizes GRI s time-proven bellows technology to provide
More informationHeavy Industrial Shock Absorbers ECA 2 to ECA 4 Self-Compensating
67 Heavy Industrial Shock Absorbers ECA to ECA 4 Enertrols durable ECA, ECA 3 and 4" Bore Series of self-compensating shock absorbers have been designed to handle extremely heavy-duty applications and
More information98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98
Series Back Pressure and Type Relief VL000 Valves FIELDVUE Valve Link Fisher Controls August Bulletin.: The Series (figure ) is used for back pressure or relief applications in liquid, gas, air, and steam
More informationM-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
More information