MALE THREAD SPECIFICATIONS

Transcription

1 MALE THREAD SPECIFICATIONS PARALLEL MALE THREADS M20 Thread type BSP-m BSP-m BSP-m BSP-m Metric Seal method ISO ISO ISO ISO ISO Designation thread ISO ISO ISO ISO ISO 261 Nominal thread diameter d Thread per inch 19W 1 19W 1 14W 1 14W 1 1.5M 2 Diameter of shoulder d M = Metric thread M20 Thread type BSP-m BSP-m BSP-m BSP-m Metric Seal method EN 837 EN 837 EN 837 EN 837 EN 837 Designation thread ISO ISO ISO ISO ISO 261 Nominal thread diameter b Thread per inch 19W 1 19W 1 14W 1 14W 1 1.5M 2 2 M = Metric thread Page 1 of 8

2 MALE THREAD SPECIFICATIONS TAPERED MALE THREADS Thread type NPT-m NPT-m NPT-m NPT-m Seal method On thread On thread On thread On thread Designation thread ASME B ASME B ASME B ASME B Nominal thread diameter b Thread per inch 18U 1 18U 1 14U 1 14U 1 1 U = Unified thread Thread type R (BSPT-m) R (BSPT-m) R (BSPT-m) R (BSPT-m) Seal method On thread On thread On thread On thread Designation thread ISO 7-1 ISO 7-1 ISO 7-1 ISO 7-1 Nominal thread diameter b Thread per inch 19W 1 19W 1 14W 1 14W 1 Page 2 of 8

3 FEMALE THREAD SPECIFICATIONS PARALLEL FEMALE THREADS Thread type BSP-f BSP-f BSP-f BSP-f Seal method ISO ISO ISO ISO Designation thread ISO ISO ISO ISO Nominal thread diameter b Thread per inch 19W 1 19W 1 14W 1 14W 1 Diameter of spot face (type N) b Thread length (min) L Port depth (min) L process connection size M20 M20 Thread type Metrical Metrical Seal method ISO ISO Designation thread ISO 261 ISO 261 Nominal thread diameter b Thread per inch 1.5M 2 1.5M 1 Diameter of spot face (type N) b2-27 Thread length (min) L Port depth (min) L M = Metrical thread Thread type BSP-f BSP-f BSP-f BSP-f Seal method EN 837 EN 837 EN 837 EN 837 Designation thread ISO ISO ISO ISO Nominal thread diameter b Thread per inch 19W 1 19W 1 14W 1 14W 1 Thread length (min) L Port depth (min) L M = Metrical thread Page 3 of 8

4 FEMALE THREAD SPECIFICATIONS TAPERED FEMALE THREADS Thread type NPT-f NPT-f NPT-f NPT-f Seal method On thread On thread On thread On thread Designation thread ASME B ASME B ASME B ASME B Nominal thread diameter b Thread per inch 18U 1 18U 1 14U 1 14U 1 Thread length (min) L Port depth (min) L U = Unified thread Thread type Rc (BSPT-f) Rc (BSPT-f) Rc (BSPT-f) Rc (BSPT-f) Seal method On thread On thread On thread On thread Designation thread ISO 7-1 ISO 7-1 ISO 7-1 ISO 7-1 Nominal thread diameter b Thread per inch 19W 1 19W 1 14W 1 14W 1 Thread length (min) L Port depth (min) L Page 4 of 8

5 WELD END SPECIFICATIONS ROTATING CONNECTIONS process connection size 1/2 Type Swivel Gauge Thread type NPT-m Seal method sealing face Designation thread ASME Nominal thread diameter 21.4 Thread per inch 14U 1 Socket wrench size 19 1 U = Unified thread instrument connection size 1/2 Type Rotating Nut Thread type BSP-f Seal method DIN Designation thread ISO Nominal thread diameter b Thread per inch 14W 1 Thread length (min) L Port depth (min) L2 24 Socket wrench size 27 Maximum allowable pressure 400 bar Page 5 of 8

6 WELD END SPECIFICATIONS FLANGED CONNECTIONS process connection size 1/2 Type Transmitter interface Standard IEC Thread size C 7/16 UNF x 20 Bore diameter D 2.9 Inside diameter groove D Centre to center distance dp L 54.0 Centre to center distance height L Depth thread L2 15 Depth groove L3 2.5 instrument connection size 1/2 Type Transmitter interface Standard IEC type B Thread size C 7/16 UNF x 20 Bolt size C1 - Bore diameter D 2.9 Inside diameter groove D Outside diameter groove D Centre to center distance dp L 54.0 Centre to center distance height L Depth thread L2 15 Depth groove L3 2.5 Page 6 of 8

7 WELD END SPECIFICATIONS MALE WELD ENDS process connection size 1/2" 3/4 DN15 DN20 Type Socket Weld Socket Weld Socket Weld Socket Weld Standard (suitable for) ASME B16.11 ASME B16.11 EN EN Weld type Fillet Weld Fillet Weld Fillet Weld Fillet Weld Outside diameter of bevel b process connection size 1/2" 3/4 DN15 DN20 Type Butt Weld Butt Weld Butt Weld Butt Weld Standard ASME B 16.9 ASME B 16.9 EN EN Weld type Penetrated weld Penetrated weld Penetrated weld Penetrated weld Outside diameter of bevel b Page 7 of 8

8 WELD END SPECIFICATIONS FEMALE WELD ENDS process connection size 1/2" 3/4 DN15 DN20 Type Socket Weld Socket Weld Socket Weld Socket Weld Standard ASME B16.11 ASME B16.11 EN EN Weld type Fillet Weld Fillet Weld Fillet Weld Fillet Weld Inside diameter of socket (min) b Inside diameter of socket (max) b Inside diameter of socket (min) L Holland UK Romania India Thailand Dubai - USA To our knowledge, the information contained herein is accurate as of the date of this document. However neither Badotherm, nor its affiliates makes any warranty, express or limited, or accepts any liability in connection with this information or its use. This information is for technical skilled persons at their own discretion and risk and does not relate to the use of this product in combination with any other product. The user alone finally determines suitability of any information or material in contemplated use, the manner of use and whether any patents are infringed. This information gives typical properties only. Badotherm reserves the right to make changes to the specifications and materials without prior notice. The latest version of the datasheet can be found on Badotherm, all rights reserved. Trademarks and/or other products referenced herein are either trademarks or registered trademarks of Badotherm. Registered trade names are Hastelloy, Inconel, Monel, and Stellite. modified page 8 of 8