Compression fittings Metric and inch
|
|
|
- Valerie Kerrie Chambers
- 5 years ago
- Views:
Transcription
1 Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure. Ideal for most general industrial applications. Technical data Medium: Compressed air or any fluids compatible with the materials/tubing listed. Operating pressure: The maximum working pressure is limited by the type of tubing being used. Refer to pages 546 to 552 for details. Ambient temperature: The maximum working temperature is generally limited by the type of tubing being used. Refer to pages 546 to 552 for details. Materials Tubing nut, sleeve & body manufactured from bar: brass to BS 2874: 1986 (CZ 121) Body manufactured from stamping: brass to BS 2872: 1969 (CZ 122) Banjo bolts are brass, nickel plated, however, MS bolts are steel, zinc plated. Typical dimensions Hose stem to tube with reducing connector 4 M8 x 1,0 10,5 8,3 6,0 5 M10 x 1,0 12,0 9,5 6,5 6 M11 x 1,0 12,0 9,4 7,0 8 M13 x 1,0 15,0 11,7 8,0 10 M15 x 1,0 16,5 12,7 8,0 12 M18 x 1,5 17,0 13,4 9,0 15 M22 x 1,5 18,5 16,0 10,0 16 M24 x 1,5 19,0 16,2 10,5 18 M26 x 1,5 20,0 17,0 10,5 22 M30 x 1,5 24,5 20,5 11,0 28 M38 x 1,5 30,0 25,8 12,5 A F V W Thread A F V W Thread 3/16" 3/8" x 24 TPI 0,44 0,35 0,26 1/4" 7/16" x 24 TPI 0,50 0,38 0,26 5/16" 1/2" x 24 TPI 0,56 0,42 0,26 3/8" 9/16" x 24 TPI 0,60 0,42 0,28 1/2" 3/4" x 24 TPI 0,66 0,50 0,26 5/8" 7/8" x 20 TPI 0,72 0,58 0,34 3/4" 1,025 x 18 TPI 0,78 0,64 0,40 A = outside diameter tube size and thread details.* F = tube or stem length inside fitting. V = nippled connector length inside fitting. W = projection of tubing nut from compression joint. All these dimensions are common to a particular tubing outside diameter size. Refer to later pages in this section for details of individual coupling dimensions. dimensions V & W will vary with the torque applied so these dimensions are guidance only. *Note: The tube sizes in the following tables refer to the Enots compression threads listed above. sizes 4, 5, 6, 8, 10, 12, 15, 16, 18, 22, 28 mm 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" types Nylon 11 or 12 and other plasticised or unplasticised tubing which conforms to the tolerances specified in BS5409: Part Copper, annealed and half-hard to BS2871: Part 2. Double wall brazed steel. Torque figures Thread sealant is applied to the full circumference of the thread. The recommended tightening torque figures for designs with thread sealant are found in the torque table below Half Hard Copper Annealed Copper Nylon 11 & 12 Double Wall Brazed Steel 4 4,5 Nm 3,4 Nm 2,8 Nm 5,7 Nm 5 6,8 Nm 5,7 Nm 5,7 Nm - 6 9,0 Nm 7,9 Nm 5,7 Nm 10,2 Nm 8 11,3 Nm 7,9 Nm 7,9 Nm 12,4 Nm 10 21,5 Nm 18,1 Nm 13,6 Nm 21,5 Nm 12 24,9 Nm 22,6 Nm 15,8 Nm 27,1 Nm 15 34,0 Nm 28,0 Nm 25,0 Nm ,0 Nm 31,0 Nm 26,0 Nm ,0 Nm 35,0 Nm 45,0 Nm ,0 Nm 68,0 Nm 46,0 Nm ,0 Nm 68,0 Nm 96,0 Nm - Conversion: Nm x 0,74 = lbf ft Inch Recommended torque using series sleeves Half Hard Copper Nylon 11 & 12 Double Wall Brazed Steel 1/8" 50 lbf in 60 lbf in 60 lbf in 1/8" 80 lbf in 60 lbf in 60 lbf in 1/8" 80 lbf in 60 lbf in 80 lbf in 1/8" 115 lbf in 70 lbf in 110 lbf in 1/8" 35 lbf ft 20 lbf ft 25 lbf ft 1/8" 35 lbf ft 35 lbf ft - 1/8" 60 lbf ft 35 lbf ft -
2 Compression fittings Metric Ø 4 to 28 mm tube Tubing plug Male tube Straight stem adaptor BSPT Stem 5 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R3/ Stem tailpiece adaptor Hose Stem Bore 4 5, , , , , , , , Female tailpiece adaptor Hose Bore 8 6, , Nippled stem connector Male tube Stem Bulkhead connector External thread 4 M12 x 1, M15 x 1, M15 x 1, M18 x 1, M20 x 1, M24 x 1, M30 x 1, M38 x 1, Minimum bulkhead thickness 3mm. Locknuts should be ordered separately. Straight stem adaptor BSPP Stem 5 G1/8A G1/4A G1/8A G1/4A G3/8A G3/8A G1/2A G3/4A G1A Bulkhead locknut Thread M12 x 1, M15 x 1, M18 x 1, M20 x 1, M24 x 1, M30 x 1, M38 x 1, M48 x 1, Nippled connector Male tube
3 Fittings Compression fittings Metric Ø 4 to 28 mm tube Reducing connector Female Male tube tube Metric to inch adaptor Male tube 4 1/ / / / / / / / / / / / Nippled adaptor Female Thread UNF M14 x 1, Unequal connector Male Female tube tube Straight connector Bracketed straight connector Nippled adaptor Male BSPT tube 4 1/ / / / / / / / / / / / / Nippled adaptor Male Female tube BSPP 4 1/ / / / / / / / / /
4 Compression fittings Metric Ø 4 to 28 mm tube Straight male adaptor BSPT 4 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R3/ R3/ R1/ R3/ Straight male adaptor BSPP 4 G1/8A G1/4A G1/8A G1/4A G1/8A G1/4A G3/8A G1/8A G1/4A G3/8A G1/2A G1/4A G3/8A G1/2A G1/4A G3/8A G1/2A G3/8A G1/2A G3/4A G1/2A G3/4A G1A G3/4A G1A Use with copper washer see page 531 Straight male adaptor (NPTF) NPTF 5 1/ / / / / / / / / / / / / / Straight male adaptor Metric Thread 5 M8 x 1, M10 x 1, M10 x 1, M12 x 1, M12 X 1, M14 X 1, Use with copper washer see page 531 Straight adaptor Female BSPP 4 1/ / / / / / / / / / / / / / Stem elbow connector Stem
5 Fittings Compression fittings Metric Ø 4 to 28 mm tube Elbow connector Male elbow adaptor NPTF 5 1/ / / / / / / / / / Bracketed elbow connector Stem tee connector Stem Female elbow adaptor Female BSPP 4 G1/ G1/ G1/ G1/ G1/ G3/ G3/ G1/ Male elbow adaptor BSPT 4 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R1/ R3/ stem tee connector Stem Side stem tee connector Stem Tee connector
6 Compression fittings Metric Ø 4 to 28 mm tube Bracketed tee connector Connector block outlets. Others available Male tee adaptor BSPT 4 R1/ R1/ R1/ R1/ R1/ R3/ Single sided manifold Outlet inlet outlets. Others available Male side tee adaptor BSPT 4 R1/ R1/ R1/ R1/ R1/ R3/ Double sided manifold Outlet inlet outlets. Others available Y connector Tubing nut Four way connector Universal tubing sleeve Metal and nylon tube
7 Fittings Compression fittings Metric Ø 4 to 28 mm tube Tubing sleeve Elbow banjo body Metal tube only Bolt Thread Elbow banjo assembly Non-regulating BSP Parallel A ** A ** A ** A ** A ** A ** A ** A ** A ** A ** A ** A ** **Black plastic washers *Copper washers Supplied complete with sealing washers. Copper washers are available as bulk pack version on all series * * *To double stack these bodies order longer bolts 20P000018, 20P Tee banjo body Bolt Thread * To double stack this body order longer bolt 20P Elbow banjo assembly Regulating out (screwdriver adjustable) BSP Parallel K K K Supplied complete with sealing washers. Pressure rating on this product is 10 bar. Tee banjo assembly Non-regulating BSP Parallel A ** A ** A ** A ** A ** A * **Black plastic washers *Copper washers Supplied complete with sealing washers. Banjo bolt Non regulating single stacking BSP Parallel 1/8 20A /4 20A /8 20A /2 20A Supplied complete with sealing washers. Banjo bolt Non regulating double stacking BSP Parallel 1/8 20 B /8 20 P * 1/4 20 B /4 20 P * 3/8 20 B /2 20 B Supplied complete with sealing washers.
8 Compression fittings Metric Ø 4 to 28 mm tube Regulating out banjo bolts Single stacking (screwdriver adjustable) Flow BSPP Reg-Out G1 8A 20K Reg-Out G1/4A 20K Reg-Out G3 8 A 20K Reg-Out G1 2A 20K Reg-In G1 8A 20L Reg-In G1 4A 20L Reg-In G3 8A 20L Reg-In G1 2A 20L Bi-Direc G1 8A 20M Bi-Direc G1 4A 20M Bi-Direc G3 8A 20M Bi-Direc G1 2A 20M Supplied complete with sealing washers. Pressure rating on this product is 10 bar. Hobbs straight connector BSPP BSPP 1/8 1/ /4 1/ /4 1/ /8 3/ /8 1/ /4 3/ /4 1/ /2 1/ /2 3/ / Hobbs coned locknut For BSP 1/ / / / / Hobbs seal For BSP Hobbs elbow adaptor BSPP 4 1/ / / / / / / / / / / / / / / / / / / / Hobbs tee adaptor BSPP 4 1/ / / / / / / / / / / / / / / / / / / / / / / /
9 Fittings Compression fittings Inch Ø 3 /16" to È" tube Tubing plug Male tube 3/ / / / / / / Bulkhead adaptor External BSP thread 3/16 1/ /4 3/ /16 3/ /8 1/ /2 3/ /8 7/ / Locknut to be ordered separately * This fitting has an 1/8 BSP female thread at the hexagonal end. Stem tailpiece adaptor Hose Stem Bore 3/16 3/ /4 1/ /16 5/ /8 3/ /2 1/ /4 3/ Female tailpiece adaptor Hose Bore 5/16 1/ Straight stem adaptor BSPT Stem 3/16 1/ /16 1/ /2 3/ Nippled stem connector Male tube Stem 3/16 3/ /4 1/ /16 5/ /8 3/ /2 1/ /8 5/ /4 3/ Bulkhead locknut BSP Thread 1/ / / / / / Nippled connector Male tube 3/ / / / / Reducing connector Male Female tube tube 1/4 3/ /16 3/ /16 1/ /8 3/ /8 1/ /8 5/ /2 3/ /2 1/ /2 5/ /2 3/ /8 5/ /8 3/ /8 1/ /4 3/ /4 1/
10 Compression fittings Inch Ø 3 /16" to È" tube Unequal connector Male Female tube tube 3/16 5/ /4 5/ /16 3/ /16 1/ Straight connector 3/ / / / / / / Straight male adaptor BSPT 3/16 1/ /16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /16 3/ /16 1/ /8 1/ /8 1/ /8 3/ /8 1/ /2 1/ /2 3/ /2 1/ /2 3/ /8 3/ /8 1/ /4 1/ /4 3/ Bracketed straight connector 3/ / / / / Nippled adaptor Male BSPT tube 3/16 1/ /4 1/ /16 1/ /8 1/ /2 1/ /16 3/ /8 3/ /2 3/ /2 1/ Nippled adaptor Male Female tube BSPP 3/16 1/ /4 1/ /16 1/ /8 3/ /2 3/ /2 1/ Straight male adaptor BSPP 3/16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /16 1/ /8 1/ /8 3/ /8 1/ /2 3/ /2 1/ Use with copper washer see page 531. Straight male adaptor NPTF 3/16 1/ /16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /16 3/ /16 1/ /8 1/ /8 3/ /8 1/ /2 1/ /2 3/ /2 1/ /8 1/
11 Fittings Compression fittings Inch Ø 3 /16" to È" tube Straight adaptor Female BSPP 3/16 1/ /16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /16 3/ /16 1/ /8 1/ /8 3/ /2 3/ /2 1/ /8 3/ /8 1/ /4 3/ / Universal stem elbow Stem 1/ / / / Bracketed elbow connector 3/ / / / Male elbow adaptor BSPT 3/16 1/ /16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /16 3/ /8 1/ /8 3/ /2 1/ /2 3/ /2 1/ /8 3/ /8 1/ /8 3/ /4 3/ Stem elbow connector Stem 3/16 3/ /4 1/ /16 5/ /8 3/ /2 1/ /8 5/ /4 3/ Elbow connector 3/ / / / / / / Female elbow adaptor Female BSP 3/16 1/ /16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /16 3/ /8 1/ /8 3/ /2 1/ /2 3/ /2 1/ /8 1/ /4 3/ Male elbow adaptor NPTF 3/16 1/ /4 1/ /8 1/ /2 1/ /8 1/
12 Compression fittings Inch Ø 3 /16" to È" tube Universal stem tee Stem 3/ / / / Bracketed tee connector 3/ / / / / Stem tee connector Stem 3/16 3/ /4 1/ /16 5/ /8 3/ /2 1/ Female tee adaptor Female BSP 1/4 1/ /16 1/ /8 1/ /2 3/ Centre leg = BSP 90 Stem tee connector Stem 3/16 3/ /4 1/ /16 5/ /8 3/ /2 1/ Side tee adaptor Female BSP 3/16 1/ /16 1/ /2 3/ Side stem tee connector Stem 3/16 3/ /4 1/ /16 5/ /8 3/ /2 1/ /8 5/ Male tee adaptor BSPT 3/16 1/ /4 1/ /16 1/ /8 1/ /2 3/ /2 1/ Tee connector 3/16 3/ /4 1/ /16 5/ /8 3/ /2 1/ /8 5/ /4 3/ /2 5/ * * centre leg 5/16 tube. Male side tee adaptor BSPT 3/16 1/ /16 1/ /8 1/ /2 3/
13 Fittings Compression fittings Inch Ø 3 /16" to È" tube Y Connector 3/ / / / / Double sided manifold Outlet inlet 5/16 3/ /2 1/ /2 5/ /8 3/ Outlets. Others available Bracketed Y connector 5/ / Tubing nut 3/ / / / / / / Four way connector 1/ / / / Universal tubing sleeve Metal and nylon tube 3/ / / / / / / Four way stem connector Stem 5/16 5/ /2 1/ Tubing sleeve Metal tube only 3/ / / / / Connector block Outlets 4 3/ / Hobbs coned locknut BSP 1/ / / / /
14 Compression fittings Inch Ø 3 /16" to È" tube Hobbs seal BSP 1/ / / / / Single sided manifold Outlets Outlet inlet 3/16 5/ /4 1/ /4 1/ /2 3/ Hobbs elbow adaptor BSP Parallel 3/16 1/ /16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /16 3/ /8 1/ /8 3/ /2 1/ /2 3/ /2 1/ /8 1/ /8 3/ /4 3/ / Bonded washer BSP 1/ / / / / / Folded copper washer BSP Metric Inch Thread Thread Thread 1/8-3/8 x 24TPI / /8 M / / / /8 M M Ê /16 x 24TPI M14 9/16 x 24TPI /4 x 24TPI M M M
Compression Fittings 34 Series Inch
4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata
10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
BSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
PNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
LF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
pneumatic function valves
pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment
Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
push-to-connect fittings system LF3000
legris products are available from: MARYAD MTRIS push-to-connect fittgs system 3000 Order from: Maryland Metrics email: techfo@mdmetric.com ph. (800)638-1830 fx. (800)87-939 prciple of system 3000 legris
Compressed Air Systems Pneumatic Fittings LLDPE Tube
John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories
UNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
brass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Compressed Air Technical Information 562 Compressed Air Fittings 563 Brass Compressed Air Fittings 564 Compressed Air Pipe & Accessories 565 ELEVEN Accessories
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
Composite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and
PL Nickel-Plated Brass Spigot Fitting Range
P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary
Quality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
LF 3600 Nickel-Plated Brass Instant Fittings
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 Nickel-Plated Brass Instant ittings One fitting for all industrial
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
Quick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems
Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing Why Gardner Denver? Simply stated There is no equal Quick-Lock from Gardner Denver has taken piping systems to a new level. Without compromising any structural
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
Flareless Bite Type Fittings
Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU
Cannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
Plumbing Brass Specification Guide
Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
Illustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Universal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
Approx. 4 s, measured in oil, with a probe Ø of 10 mm made of stainless steel. Influential effect of the ambient temperature
sales@jumo.co.uk info.us@jumo.net Page/6 Dial Thermometer Type 608225 Special features Class Display ranges from -40 C to +600 C Temperature indicator as built-in or add-on device Stainless steel case
Economizer Regulator Filter Upgrade
Overview Chart LNG has released a new and improved economizer regulator, and filtering system. The new economizer filter system is designed to enhance reliability, and offer lower operating costs. In 2012
Inch and Metric Flaring Tooling for 1025
Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information
F250 F550
AIR INNOVATEDTM Illustrated Parts List for VMAC System V900111 Ford 6.8 L Triton V 10 2011 2014 F250 F550 www.vmacair.com Illustrated Parts List for VMAC System V900111 FORD 6.8 L TRITON V10 2014-2011
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94 SINCE 1998 PREVIOUSLY PAC FAB 1 2 3 KEY 4 4654-25 KEY 4 4654-69 KEY 8 4654-30 20 4 5 7 6 KEY 8 4654-74A KEY 9 4654-23 8 9 10 12 13 KEY 23 4601-4801 KEY 19 4650-14A
Accessories for Lubrication Systems Product Catalogue
Accessories for Lubrication Systems Product Catalogue Productivity is key in today s global economy. Proper lubrication increases uptime and makes maintenance routines simple. Accessories for Lubrication
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
Front View. Right Section View. Back View. Assy. Number Assy. Description A Control unit, MDU. Date 08.
18 av 94-2013-11-05 Front View Right Section View Back View 2011-10-14 Date 08 Revision Drawn KRT 6400007 Control unit, MDU 1:2 19 av 94-2013-11-05 1 Tighten lens nuts very carefully, lenses break easily
PNEUMATIC TUBING FITTING
2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes
GF Sentry Flame Failure Series
GF Sentry Flame Failure Series Gas Range Match Broilers Parts List Models GF8-BRL GF2-BRL GF30-BRL GF36-BRL Document Number: G_GMD_PL_RMBROILERSGFSERIES_GF-BRL (Rev 6 05/207) Rating Plate Location The
Compression Fittings
ompression Fittings TITN ompression Fittings are designed to comply with established industry standards. This economical fitting is available in a wide range of off-the-shelf sizes and styles. They are
FSE 130 Fuel System Canister
FSE 130 Fuel System Canister 8.2 4014 6 0 5 9 6 0 6 2 1013 6056 6060 6061 6052 4015 6053 6051 4016 4017 6050 3017 (Not visible on the back) 2010 2009 3016 7050 6058 6057 1011 6055 1012 6054 FSE 130 Fittings
standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
SEPTEMBER Voted Top Product of 2010 by readers of PHPI Magazine
Polybutene Plumbing & Heating Price list SEPTEMBER 2011 Voted Top Product of 2010 by readers of PHPI Magazine 0800 043 8883 The Buteline Plumbing System is an integrated flexible plumbing system incorporating
RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
Assembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
ISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT
ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK
ADAPTERS AND TUBE FITTINGS
DPTERS INDEX Section Pages Hose 15-67 Fittings 68-180 dapters and Tube Fittings 181-228 DPTERS ND TUE FITTINGS Description Page dapters raze and weld to 37 flare 221 raze and weld to split flange 220 SPP
Pipe Swivels. The Fitting Authority
Pipe Swivels The Fitting Authority 0507 007 007 3507 Straights 45 Elbows 307 307 507 5507 07 NPT / NPSM Swivel 90 Elbows 5607 NPT / NPSM Swivel Long Drop 07 077T NPSM Swivel / NPSM Swivel / NPSM Swivel
Stainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
37 Stainless Steel. A wide range of end configurations are suitable for many Hydraulic applications
JIC Prochem manufactures and supplies an extensive range of JIC Fittings and Adaptors in all configurations. 37 Stainless Steel Fittings Prochem 37 JIC Fittings and Adaptors provide a straightforward,
14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
Spare parts list. Handheld pneumatic pick hammers CP 0222 CHIT, CP 0222 CHIT BS, CP 0222 CHOT BS.
Spare parts list Handheld pneumatic pick hammers CP 0 CHIT, CP 0 CHIT, CP 0 CHOT www.cp.com CP 0 CHIT, CP 0 CHIT, CP 0 CHOT 9800 00 0 CP 0 CHIT, CP 0 CHIT, CP 0 CHOT Contents Contents General information...............................................................
V GM C4500 C5500
Illustrated Parts List for VMAC System System V900099 2008-2007 GM C4500 C5500 LMM Duramax 6.6L Diesel without dual alternators System V900098 2007-2006 GM C4500 C5500 Duramax 6.6L Diesel without dual
Inch-size One-touch Fittings. Applicable Tubing: Inch Size Connection Thread: UNF, NPT. How to Order. Applicable tubing O.D.
Inch- One-touch Fittings Series KQ Tubing: Inch Size Thread:, KQ 0 ow to Order S Symbol Nil ccessory Symbol KQN KQC KQ (KQ) roduct s color Body White Black One-touch s Release button Orange Red Name Nipple
Poly-Tite Fittings. Order By part number and name.
oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer
industrial panel lamps
features specifications Typical characteristics (Ta = C) Ø8.1mm mounting Robust bright nickel plated brass housing Low profile styling, sunlight readable LEDs Sealed to IP67 Internal reverse protection
LCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No
LCD 500,1500 Spare parts list Handheld core drills LCD 500 LCD 500 LCD 1500 Valid from serial number BGF0006875 BGF0006875 BGF0006875 2015 Construction Tools PC AB No. 3392 5193 01 2015-06 General information
Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
Insert Fittings. KF Series
Insert Fittings Series A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials ube grip (resin sleeve) ube is
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
IDC Field Wireable eurofast & picofast Connectors
Advanced Connection Solutions for Manufacturers Worldwide! IDC Field Wireable eurofast & picofast Connectors picofast Field Wireable IDC Connector eurofast Field Wireable IDC Connector Overview Connection
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
Threaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Pipe Fittings and Port Adapters
Pipe Fittings and Port Adapters Pipe Fittings and Port Adapters F The Fitting Authority Pipe Fittings and Adapters - Order Today, SHIP TODAY at www.partsgopher.com Pipe Fittings and Port Adapters 4300
Viega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
Electrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET
M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:
Rational supply for tools at work stations
hose reels automatic hose reels Rational supply for tools at work stations Automatic hose reels are essential basic equipment for workshops. They save time and improve comfort and safety when using flexible
Insertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
Series Variations. General Purpose Fittings Series. Fittings & Tubing. Fittings. One-touch Fittings KQ2 Series. One-touch Fittings KQ2 Series
& One-touch connection and release Possible to use in vacuum to 00 kpa ø2 Sealant/Gasket seal Metric size tube/m, R, Rc thread connection M3 M6 2 General Purpose Series Face seal Metric size tube/g thread
Pipe Fittings and Port Adapters
Pipe Fittings and Port Adapters Pipe Fittings and Port Adapters F The Fitting Authority atalog 4300 F5OHAO F5 FF FFF F8OHA8O SAE-ORB / SAE-ORB SAE-ORB / NPTF Long Metric-ORR / Metric-ORR Nipples F F F
Cable Glands. Description Introduction to Cable Glands 399. EEXe Series EEXe Series. A2F, E1FX/E2FX, E1FW/E2FW and T3 Series
Description Page Introduction to Cable Glands 399 EEXe Series 400-401 Polyamide Cable Glands for Unarmored Cable Increased Safety EEXe Series Ex e Certified Ex I Application Entry Thread Seal A2F, E1FX/E2FX,
EPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
/ Push-to-conect fittings/ V TOPRING. Push-to-connect fittings Tubings Mufflers
96.830 / Push-to-conect fittings/ V. 09.6.06 TOPRING Push-to-connect fittings s Mufflers TOPFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 40 4 MAXFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 44 46 TOPFIT
For more information on where your nearest stockist is or for a complete demonstration by one of our team, please call us today
Polybutene Plumbing & Heating Price list APRIL 2014 0800 043 8883 The Buteline Plumbing System is an integrated flexible plumbing system incorporating Polybutene pipes, fittings and tools which range in
TEX 07PE. Spare parts list. Handheld pneumatic pick hammers. Valid from serial number
TEX 07PE Spare parts list Handheld pneumatic pick hammers TEX 07PE TEX 07PE FSH Valid from serial number 0009 0009 0 Atlas Copco Construction Tools AB No. 9800 08 0a 0005 TEX 07PE Contents Contents General
Connectivity Products
Cable Glands Strain Relief Snap-In Labels Lock Nuts Torque Wrench Protective Sleeves U2 U5 U5 U6 U7 U8 Features NPT and PG thread cable glands in nylon or metal materials Locknuts in multiple thread sizes
604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
Air Mask. Medium Pressure (3000 psi) NFPA Edition Compliant PARTS LIST
Air Mask PARTS LIST Medium Pressure (000 psi) NFPA - 00 Edition Compliant TAL 0 (L) Rev. MSA 00 Prnt. Spec. 000000 (A) Mat. 000 Doc. 000000 pressure demand facepiece NFPA Facepiece Components Facepiece
Connect. Cable glands, locknuts and accessories
Connect Cable glands, locknuts and accessories 234 Our range of xxxxxxxxxx cable glands has been expanded to offer the most high quality glands available. Our wide range includes BW, CW, and A1/A2 gland
Standard Series Standard
Standard Series Standard Technical Data Coupler connector, cable connector and coupler connector rectangular housing Locking screw connection Protection IP 50 to IP 54 with conexil in the housing, flat-gasket
M12x1 Circular Connectors
M12x1 Circular Connectors Agenda 1. Introduction M12x1 Circular Connectors 2. M12x1 X-coded 3. M12x1 D-coded 4. Accessories and Nomenclature 3 / 2015 Product Presentation M12x1 Page 2 M12x1 Circular Connectors
BS up.v.c SOIL, WASTE, VENT PIPES AND FITTINGS
Soil Waste & Vent Pipes Sweep Bend Sweep Bend with Inspection Opening 91¼ Soil Waste & Vent pipes for solvent weld connection to all fittings. Wall Length Mean Outside Thickness L in per M. Dia. D (mm)
Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
5000 Sc. Cleaning Solution Generator Parts Manual. North America / International. DM20008 Rev. 02 (6-2012) *DM20001*
5000 Sc Cleaning Solution Generator Parts Manual North America / International www.tennantco.com DM20008 Rev. 02 (-202) *DM2000* A B Ref Part No. Serial Number Description Qty. 828 (000000- ) Bracket Wldt,
DIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog
For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire
Radiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
FF Series (Steel) ISO Interchange
Eaton s FF Series flat face is specifically designed for those applications where quick and easy connections and no-spill performance are essential. The FF Series is ideal for use when global interchangeability
DIN 2353 French series adaptors
Adattatori DIN 2353 Serie Francese Pagina / Page 2 2 Nut Cutting rings 7 7410 Dado di serraggio Anellino tagliente Pagina / Page 3 4 5 Male stud couplings Male stud elbow 7430 7450 7460 Terminale diritto