Customer Market Results Interface (CMRI) Interface Specification Fall 2016 Release

Transcription

1 Customer Market Results Interface (CMRI) Interface Specification Fall 2016 Release : February 3, 2016

2 Revision History Date Description 10/23/ Initial document release related to the Spring 2014 Release (FERC764 and RIMPR projects). This is red-lined based on the CMRI Fall/December 2013 Release GMT Implementation document. 11/20/ Eliminated the retrieveeirforecast service from the spring 2014 CMRI API specifications document. DA & HA forecasts will be from the PIRP system. 03/31/ Fall 2014 Changes. 1. RequestMarketAwards_v3.xsd Added new enumeration value IEEA for product Added new enumeration value for RTD for executiontype 2. MarketAwards_v3.xsd Added new enumeration value IEEA for product Added tiepointusedforflow element Added new enumeration value for RTD for executiontype 3. RequestSchedulePrices_v3.xsd Added new enumeration value IEEA for product Added new enumeration value for RTD for executiontype Added new enumeration value GHG for pricetype 4. RequestMarketSchedules_v2.xsd Added new enumeration value IEEA for product Added new enumeration value for RTD for executiontype Added tiepointusedforflow element 5. Added new service for EIM Transfer Results 6. Added new service for EIM Test Results 7. Added new service for Load Base Schedules 8. Added new service for EIM Entity market base schedules 9. Added new service for Market Base schedules 10. Updated resource id description for all the services. 04/29/ Additional Fall 2014 Changes 1. Added new service for CMRI Inter-tie resource transaction id 2. Added new service for EIM Entity CMRI Inter-tie resource transaction id 3. Updated EIMTranferResult service 4. Updated EIMTestResult service 5. Updated LoadBase schedule service 6. Updated EIM entity market base schedule and market base schedule services 7. EIM Transfer results has been renamed as EIM Transfer 8. Updated the service Retrieve Convergence Bid Awards 06/17/ Additional Fall 2014 Changes 1. EIM Test Results -added inputtimetype element enumerations Page 2 of 127

3 Date Description 2. EIM Transfer - Removed resource, and scheduling point elements 3. Updated EIM market base schedule and market base schedule services to add note on execution type element description. 4. Updated Market Schedule service to remove the RC enumeration for product element. 5. Update CMRIInterTieResourceTransactionID request to remove datetimestart and End and markettype elements. 08/12/ Additional Fall 2014 Changes 1. Updated schedule price request and response element tables to change the markettype value from RTD to RTM 2. Updated Load Base Schedules request and response sections to add inputtimetype element. 3. Changed executiontype element to optional element in EIM Entity Market Base Schedules Response. 4. Changed executiontype element to optional element in Market Base Schedules Response. 5. Updated both EIM Entity CMRI Inter-tie Resource Transaction ID and CMRI Inter-tie Resource Transaction ID Response sections for the following changes AlternativeSchedulingPoint/mrid - remove PrimarySchedulingPoint/mrid - remove sequenceidentifier - remove PrimaryFlowgate/mrid - add, required SecondaryFlowgate/mrid - add, optional purchaseserviceentity - add, required 6. Added a note to the Market Schedules Request End element. 7. Added a note to the Market Awards Request End element. 8. Added a note to the Schedule Prices Request End element. 03/31/ Fall 2015 Changes 1. Updated EIM Test results serive to include two additional optional elements (additionalincrementalrequirement and additionaldecrementalrequirement), updated MessageHeader as required element and major version is now v2 2. Added a note to the EIM Transfer service to indicate that this service no longer provides data beginning Fall 2015 deployment 3. Added new service for EIM Transfer Limit 4. Added new service for EIM Bid Capacity Percentage Page 3 of 127

4 Date Description Convergence Bid Awards Response 08/14/ Document modifications include: 1. te: There is no xsd change under Fall 2015, only documentation update in this document revision. Corrected primaryschedulingpoint to flowgate name under the Response section, to align with its corresponding v2 xsd released back in Fall Updated section 1.1 Purpose, from "CAISO" to "Customer" Updated section 1.2 Related Documents, to refer to the release planning page Updated section 2.1 Document Release notes Corrected the request and/or response schedulingcoordinator element document description to be the EIM entity ID for the following services: o EIMTransfer o EIM Test Results o EIM Load Base Schedules o EIMEntityCMRIIntertieResourceTransactionID o EIMEntityMarketBaseSchedules o BidCapacityPercentage te: These are all document text updates only, existing service output value have no changes. Corrected the HighLimit description on the EIMTransferLimit service Added the EIMEntityTransferLimit service Added notation on the request.start and request.end for the EIM Bid Capacity Percentage service 02/03/ Added the RetrieveEIRForecast service which provides the day-ahead/hour-ahead Eligible Intermittent Resource forecast Page 4 of 127

5 TABLE OF CONTENTS 1 Introduction Purpose Related Documents Document Release tes x Retrieve Conformed Dispatch tice Operation Details Conformed Dispatch tice Request Element Table Conformed Dispatch tice Response Element Table Retrieve Contract Usage Operation Details Contract Usage Request Element Table Contract Usage Response Element Table Retrieve Convergence Bid Awards Operation details Convergence Bid Awards Request Element Table Convergence Bid Awards Response Element Table Retrieve CRR Adjustment Constraints Operation Details CRR AdjustmentConstraints Request Element Table CRR AdjustmentConstraints Response Element Table Retrieve CRR Adjustment Flow Impact Operation Details CRR Adjustment FlowImpact Request Element Table Page 5 of 127

6 7.3 CRR AdjustmentFlowImpact Response Element Table Retrieve CRR Adjustment Prices Operation Details CRR AdjustmentPrices Request Element Table CRR AdjustmentPrices Response Element Table Retrieve Default Bid Curves Operation Details Default Bid Curves Request Element Table Default BidCurves Response Element Table Retrieve Default RMR Costs Operation Details Default RMR Costs Request Element Table Default RMR Costs Response Element Table Retrieve Expected Energy Operation Details Expected Energy Request Element Table Expected Energy Response Element Table Retrieve Expected Energy Allocation Details Operation Details ExpectedEnergyAllocationDetails Request Element Table ExpectedEnergyAllocationDetails Response Element Table Retrieve Finally Qualified Load Following Capacity Operation Details Finally Qualified Load Following Capacity Request Element Table Page 6 of 127

7 13.3 Finally Qualified Load Following Capacity Response Element Table Retrieve Flex Ramp Capacity Operation Details Flex Ramp Capacity Request Element Table Flex Ramp Capacity Response Element Table Retrieve ISO Commitment Cost Details Operation Details ISO Commitment Cost Details Request Element Table ISO Commitment Cost Details Response Element Table Retrieve Market Awards Operation Details Market Awards Request Element Table Market Awards Response Element Table Retrieve MPM Results Operation Details MPM Results Request Element Table MPM Results Response Element Table Retrieve RMR Dispatches Operation Details RMR Dispatches Request Element Table RMR Dispatches Response Element Table Retrieve Schedule Prices Operation Details Schedule Prices Request Element Table Page 7 of 127

8 19.3 Schedule Prices Response Element Table Retrieve Start Up Shut Down Instructions Operation Details Start Up Shut Down Instructions Request Element Table Start Up Shut Down Instructions Response Element Table Retrieve Two Day Ahead MSSA Load Forecast Operation Details Two Day MSSA Load Forecast Request Element Table Two Day MSSA Load Forecast Response Element Table Retrieve Unit Commitments Operation Details Unit Commitments Request Element Table Unit Commitments Response Element Table Retrieve n Dispatchable Time Ranges Operation Details n Dispatchable Time Ranges Request Element Table n Dispatchable Time Ranges Response Element Table Retrieve Market Schedules Operation Details Market Schedules Request Element Table Market Schedules Response Element Table Retrieve Market Forecast Operation Details Market Forecast Request Element Table Page 8 of 127

9 25.3 Market Forecast Response Element Table Retrieve EIM Transfer Operation Details EIM Transfer Request Element Table EIM Transfer Response Element Table Retrieve EIM Test Results Operation Details EIM Test Results Request Element Table EIM Test Results Response Element Table Retrieve Load Base Schedules Operation Details Load Base Schedules Request Element Table Load Base Schedules Response Element Table Retrieve EIM Entity Market Base Schedules Operation Details EIM Entity Market Base Schedules Request Element Table EIM Entity Market Base Schedules Response Element Table Retrieve Market Base Schedules Operation Details Market Base Schedules Request Element Table Market Base Schedules Response Element Table Retrieve CMRI Inter-tie Resource Transaction ID Operation Details CMRI Inter-tie Resource Transaction ID Request Element Table Page 9 of 127

10 31.3 CMRI Inter-tie Resource Transaction ID Response Element Table Retrieve EIM Entity CMRI Inter-tie Resource Transaction ID Operation Details EIM Entity CMRI Inter-tie Resource Transaction ID Request Element Table EIM Entity CMRI Inter-tie Resource Transaction ID Response Element Table Retrieve EIM Transfer Limit Operation Details EIM Transfer Limit Request Element Table EIM Transfer Limit Response Element Table Retrieve EIM Entity Transfer Limit Operation Details EIM Entity Transfer Limit Request Element Table EIM Entity Transfer Limit Response Element Table Retrieve EIM Bid Capacity Percentage Operation Details EIM Bid Capacity Percentage Request Element Table EIM Bid Capacity Percentage Response Element Table Retrieve EIR Forecast Operation Details EIR Forecast Request Element Table EIR Forecast Response Element Table Fault Return Fault Return Element Table Schema (StandardOutput.xsd) Page 10 of 127

11 38 Appendix Data Type Page 11 of 127

12 1 Introduction 1.1 Purpose This document describes request and response XSDs related to the Customer Market Results Interface (CMRI) system. 1.2 Related Documents For more information on current or past project initiative releases, please refer to the release planning page at Page 12 of 127

13 2 Document Release tes x This document release version affects the following system data interface specifications: # # Service Schema Major Minor RequestResourceForecast_v1.xsd 1 new retrieveeirforecast 1 v ResourceForecast_v1.xsd Page 13 of 127

14 3 Retrieve Conformed Dispatch tice 3.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD Retrieve ConformedDispat chtice Input Output RetrieveConformedDispat chticerequest retrieveconformeddispatc htice_docattachreque st RetrieveConformedDispat chticeresponse retrieveconformed Dispatchtice_v 1.wsdl retrieveconformed Dispatchtice_v 1_DocAttach.wsdl RequestConformedDispat chtice_v1.xsd ConformedDispatchtice _v1.xsd retrieveconformeddispatc htice_docattachrespo nse Fault faultreturntype StandardOutput.xsd 3.2 Conformed Dispatch tice Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start Starting DateTime of the time period for which the data is End Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. scheduling Coordinator The unique identifier for a scheduling coordinator (SC). Page 14 of 127

15 resource The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) 3.3 Conformed Dispatch tice Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload ConformedDisptice class resource (in ConformedDisptice class) The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) Scheduling Coordinator The unique identifier for a scheduling coordinator (SC). tradedate The trade day to which the current record pertains (in California Prevailing Time). date HR The hour of the trade day to which the current record pertains (in California Prevailing Time). integer intervalstarttime Start time of the market interval intervalendtime End time of the market interval VoltageSupport Flag Voltage Support Flag. This field indicates if the unit was dispatched for voltage support. Valid values are Y (for yes) and N (for no). dispatchmw DEC MW value dispatched for local voltage support float UnitSubstitution Page 15 of 127

16 Precedence The precedence for unit substitution. The lower number has a higher precedence. integer resource (in SubstitutableUnit class) The unique identifier for the substituting resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) MW Scheduled MW value for the substituting resource. float DayAheadResult energy (in DayAheadResults class) Sum of energy schedules in the Day-Ahead market. float spin Sum of Ancillary Service Spinning Awards. float nonspin Sum of Ancillary Service n-spinning Awards. float regup Sum of Ancillary Service Regulation Up Awards. float regdown Sum of Ancillary Service Regulation Down Awards. float RMRDispatch (in DayAheadResults class) Dispatched/scheduled value that was either manually or generated by the market run, pursuant to the RMR Contract. float CCR (in DayAheadResults class) Corresponds to the Competitive Constraint Run value for the Day-Ahead market float RealTimeResult RMRDispatchEnergy Total (in RealTimeResults class) Sum (six intervals) of the RMR Dispatch Energy float CCR (in RealTimeResults class) Corresponds to the Competitive Constraint Run value for the Real-Time market float RMRDispatchEnergy intervalnum The interval number. An interval represents a specific part of a trade hour to which the current record pertains. A trade hour may comprise of one or more intervals, of equal duration, based on the interval duration. For example, if the interval duration is 60 minutes, the trade hour will comprise of only one interval of 60 minutes. If, on the other hand, the interval duration is 15 minutes, the trade hour will comprise of four intervals of 15 minutes each. The intervals are numbered sequencially starting with the earliest one numbered 1. integer energy (in RMRDispatchEnergy class) RMR Dispatch Energy per 10-minute intervals. float Page 16 of 127

17 dispatchintervalstartt ime dispatchintervalendti me Start time of the dispatch energy interval End time of the dispatch energy interval Page 17 of 127

18 4 Retrieve Contract Usage 4.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD retrievecontract Usage Input retrievecontractus agerequest retrievecontractusage_ v2.wsdl RequestContractUsage _v2.xsd Output retrievecontractus age_docattachreq uest retrievecontractus ageresponse retrievecontractusage_ v2_docattach.wsdl ContractUsage_v2.xsd retrievecontractus age_docattachres ponse Fault faultreturntype StandardOutput.xsd 4.2 Contract Usage Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start Starting DateTime of the time period for which the data is End Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. Page 18 of 127

19 markettype The identifier for the market type. Only one market type is allowed in the request. Valid values are DAM (for day ahead market), and RTM (for real-time market) scheduling CoordinatorList The unique identifier for a scheduling coordinator (SC). At least one SCID is required. resourcelist The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) 4.3 Contract Usage Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload resource The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) scheduling Coordinator The unique identifier for a scheduling coordinator (SC). markettype The identifier for the market type. Valid values are DAM (for day ahead market), and RTM (for real-time market) tradedate The trade day to which the current record pertains (in California Prevailing Time). date HR The hour of the trade day to which the current record pertains (in California Prevailing Time). integer Page 19 of 127

20 intervalnum The interval number. An interval represents a specific part of a trade hour to which the current record pertains. A trade hour may comprise of one or more intervals. In the case of the CRN report, it would be 1 to 6 intervals per hour; covering a 10-minute interval duration period. integer MW Refers to the self-schedule quantity in MW float contracttype Refers to the contract type of the self-schedule transaction ; represented as: ETC - Existing Transmission Contract TOR - Transmission Ownership Rights contractreferencenu mber Refers to the specific contract identification number issued by the California ISO to Scheduling Coordinators transactions under Existing Contracts or TORs (Transmission Ownership Rights). intervalstarttime Start time of the market interval intervalendtime End time of the market interval Page 20 of 127

21 5 Retrieve Convergence Bid Awards 5.1 Operation details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD retrieveconverg encebidawards Input Output retrieveconvergenc ebid AwardsRequest retrieveconvergenc ebidawards_docat tachrequest RetrieveConvergen cebid AwardsResponse retrieveconvergenc ebidawards_docat tachresponse retrieveconvergencebid Awards_v2.wsdl retrieveconvergencebid Awards_v2_DocAttach. wsdl RequestConvergenceBi dawards_v2.xsd ConvergenceBidAwards _v2.xsd Fault faultreturntype StandardOutput.xsd 5.2 Convergence Bid Awards Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor version identifier; Date reflecting the release this latest version update was related to. Message Payload Start End Starting DateTime of the time period for which the data is Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. scheduling Coordinator The list of the unique identifier for a scheduling coordinator (SC). Page 21 of 127

22 Pnode The list of Pde or APde ID associated with the node where convergence bidding occurred virtualbidtype Indicates whether this is a virtual demand or supply bid. Valid values are: VIRTUAL SUPPLY or VIRTUAL DEMAND 5.3 Convergence Bid Awards Response Element Table Message Header Source Source system which provides data for this service. Minor version identifier; Date reflecting the release this latest version update was related to. Message Payload Pnode The Pde or APde ID associated with the node where convergence bidding occurred isintertie The flag indicating whether the award is for an intertie or not. Valid Values: indicates that the award is for an intertie indicates that the award is not for an intertie Scheduling Coordinator The unique identifier for a scheduling coordinator (SC). flowgate Primary Tie Required if the virtual bid Pnode or Apnode is external to CAISO: this is modeled as a flowgate with either the to or from being an external HostControlArea tradedate The trade day to which the current record pertains (in California Prevailing Time). date virtualbidtype Indicates whether this is a virtual demand or supply bid. Valid values are: VIRTUAL SUPPLY or VIRTUAL DEMAND HR The hour of the trade day to which the current record pertains (in California Prevailing Time). integer MW This is the cleared convergence bid MW float Page 22 of 127

23 intervalstarttime Start time of the market interval intervalendtime End time of the market interval Page 23 of 127

24 6 Retrieve CRR Adjustment Constraints 6.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD RetrieveCRRAdj ustmentconstrai nts Input Output retrievecrradjustm entconstraintsreque st retrievecrradjustm entconstraints_doca ttachrequest" retrievecrradjustm entconstraintsrespo nse retrievecrradjustm entconstraints_doca ttachresponse retrievecrradjustme ntconstraints_v1.wsdl retrievecrradjustme ntconstraints_v1_do cattach.wsdl RequestCRRAdjustmentD ata_v1.xsd CRRAdjustmentData_v1.x sd Fault faultreturntype StandardOutput.xsd 6.2 CRR AdjustmentConstraints Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start End Starting DateTime of the time period for which the data is Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. Scheduling CoordinatorList The list of the unique identifier for a scheduling coordinator (SC). Page 24 of 127

25 ConstraintList The list of unique identifier of the transmission constraint that impacted the CRR portfolio due to convergence bidding 6.3 CRR AdjustmentConstraints Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload te: The response CRRAdjustmentData schema is used for all three following services: CRRAdjustmentPrices, CRRAdjustmentConstraints, and CRRAdjustmentFlowImpact. The data elements described below are those relevant in providing the output for the retrievecrradjustmentconstraints service only. tradedate The market trading day on when the CRR settlement rule is applicable on date schedulingcoordinato r Unique identifier of the scheduling coordinator certified by the CAISO to submit convergence bids via a convergence bidding agreement name The unique identifier of the transmission constraint that impacted the CRR portfolio due to convergence bidding node The Full Network Model node identifier associated with the transmission constraint HR HASPPhysical The hour of the trade day to which the current record pertains (in California Prevailing Time). Flag indicating either of the following: integer YES = Denotes that the node s impact to the CRR settlement rule was due to physical bidding activity, that is reduced in the HASP market NO = Denotes that the node s impact to the CRR settlement rule was due to convergence bidding activity Page 25 of 127

26 intervalstarttime Start time of the market interval intervalendtime End time of the market interval Page 26 of 127

27 7 Retrieve CRR Adjustment Flow Impact 7.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD RetrieveCRRAdj ustmentflowimp act Input retrievecrradjustm entflowimpactreque st retrievecrradjustm entflowimpact_doca ttachrequest retrievecrradjustme ntflowimpact_v1.wsd l retrievecrradjustme ntflowimpact_v1_do cattach.wsdl RequestCRRAdjustmentD ata_v1.xsd Output retrievecrradjustm entflowimpactrespo nse retrievecrradjustm entflowimpact_doca ttachresponse CRRAdjustmentData_v1.x sd Fault faultreturntype StandardOutput.xsd 7.2 CRR Adjustment FlowImpact Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start End Starting DateTime of the time period for which the data is Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. Scheduling CoordinatorList The list of the unique identifier for a scheduling coordinator (SC). Page 27 of 127

28 ConstraintList The list of unique identifier of the transmission constraint that impacted the CRR portfolio due to convergence bidding 7.3 CRR AdjustmentFlowImpact Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload te: The response CRRAdjustmentData schema is used for all three following services: CRRAdjustmentPrices, CRRAdjustmentConstraints, and CRRAdjustmentFlowImpact. The data elements described below are those relevant in providing the output for the retrievecrradjustmentflowimpact service only. tradedate The market trading day on when the CRR settlement rule is applicable on date schedulingcoordinato r CBEMGroup Unique identifier of the scheduling coordinator certified by the CAISO to submit convergence bids via a convergence bidding agreement The convergence bidding entity group name that coincides with a CRR Holder Name name The unique identifier of the transmission constraint that impacted the CRR portfolio due to convergence bidding HR The hour of the trade day to which the current record pertains (in California Prevailing Time). integer MW The total hourly amount of flow (MW) impacted by the CRR settlement rule float intervalstarttime Start time of the market interval intervalendtime End time of the market interval Page 28 of 127

29 8 Retrieve CRR Adjustment Prices 8.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD Retrieve CRRAdjustment Prices Input Output retrievecrradjustm entpricesrequest retrievecrradjustm entprices_docattach Request retrievecrradjustm entpricesresponse retrievecrradjustm entprices_docattach Response retrieve CRRAdjustmentPrice s_v1.wsdl CRRAdjustmentPrice s_v1_docattach.wsdl RequestCRRAdjustmentD atahour_v1.xsd CRRAdjustmentData_v1.x sd Fault faultreturntype StandardOutput.xsd 8.2 CRR AdjustmentPrices Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start End Starting DateTime of the time period for which the data is Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. Scheduling CoordinatorList The list of the unique identifier for a scheduling coordinator (SC). ConstraintList The list of unique identifier of the transmission constraint that impacted the CRR portfolio due to convergence bidding Page 29 of 127

30 8.3 CRR AdjustmentPrices Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload te: The response CRRAdjustmentData schema is used for all three following services: CRRAdjustmentPrices, CRRAdjustmentConstraints, and CRRAdjustmentFlowImpact. The data elements described below are those relevant in providing the output for the retrievecrradjustmentprices service only. tradedate The market trading day on when the CRR settlement rule is applicable on date schedulingcoordinato r Unique identifier of the Scheduling Coordinator certified by the CAISO who is a CRR Holder entity name The unique identifier of the transmission constraint that impacted the CRR portfolio due to convergence bidding CRR The CRR unique identifier impacted by the CRR settlement rule due to convergence bidding HR The hour of the trade day to which the current record pertains (in California Prevailing Time). integer Price The calculated price which is the difference between the Day- Ahead and Real-Time due to convergence bidding with impact on the CRR portfolio float intervalstarttime Start time of the market interval intervalendtime End time of the market interval Page 30 of 127

31 9 Retrieve Default Bid Curves 9.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD Retrieve DefaultBid Curves Input Output retrievedefaultbid CurvesRequest retrievedefaultbidcur ves_docattachreque st retrievedefaultbid CurvesResponse retrievedefaultbidcur ves_docattachrespo nse retrievedefaultbidc urves_v1.wsdl retrievedefaultbidc urves_v1_docattac h.wsdl RequestDefaultBid Curves_v1.xsd DefaultBidCurves_v1.x sd Fault faultreturntype StandardOutput.xsd 9.2 Default Bid Curves Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start End Starting DateTime of the time period for which the data is Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. markettypelist The identifier for the market type. Valid values are DAM (for day ahead market), and RTM (for the HASP reports). Page 31 of 127

32 scheduling CoordinatorList The unique identifier for a scheduling coordinator (SC). defaultbidtypelist This element represents the basis on which the default bid price curve is created. Valid values are COST (for cost basis), LMP (for LMP basis), and NEGOTIATED (for negotiated price as the basis). resourcelist TimePeriodList The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) The time period to which the default bid price curve applies. Valid values are ON_PEAK (for on-peak hours), and OFF_PEAK (for off-peak hours). All 24 hours are set to off-peak on holidays as defined by WSCC On regular days- Monday thru Saturday, hour-ending 7 to hour-ending 22 are on-peak; and the rest of the hours including Sunday is off-peak 9.3 Default BidCurves Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload resource The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) resourcetype The type of resource. Valid values are GEN (for a generating resoruce), LOAD (for a load resource) and ITIE (for an intertie resource). Page 32 of 127

33 configuration The unique identifier for a configuration of an MSG (multistage generator) resource. This element will be populated when the transaction applies to an MSG resource; otherwise this element will not be included in the output payload. scheduling Coordinator The unique identifier for a scheduling coordinator (SC). markettype The identifier for the market type. Valid values are DAM (for day ahead market), and RTM (for the HASP reports). tradedate The trade day to which the current record pertains (in California Prevailing Time). date timeperiod The time period to which the default bid price curve applies. Valid values are ON_PEAK (for on-peak hours), and OFF_PEAK (for off-peak hours). All 24 hours are set to off-peak on holidays as defined by WSCC On regular days- Monday thru Saturday, hour-ending 7 to hour-ending 22 are on-peak; and the rest of the hours including Sunday is off-peak defaultbidtype This element represents the basis on which the default bid price curve is created. Valid values are COST (for cost basis), LMP (for LMP basis), and NEGOTIATED (for negotiated price as the basis). starttime The effective start datetime for the default bid curve (in California Prevailing Time). endtime The effective end datetime for the default bid curve (in California Prevailing Time). adderflag A flag to indicate if bid adder value has been applied to the bid. segmentnum The segment number for the bid price curve. integer MW The MW value for the specified segment of the bid price curve. float price The price ($ per MW) value for the specified segment of the bid price curve. float segmentbidtype For a LMP bid, this element represents the bid type of the segment. Valid values are COST (for cost basis), LMP (for LMP basis), and NEGOTIATED (for negotiated price as the basis). intervalstarttime Start time of the market interval intervalendtime End time of the market interval Page 33 of 127

34 10 Retrieve Default RMR Costs 10.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD RetrieveDefaultR MRCosts Input Output RetrieveDefaultRMR CostsRequest retrievedefaultrmrc osts_docattachrequ est RetrieveDefaultRMR CostsResponse retrievedefaultrmrc osts_docattachresp onse RetrieveDefaultRMR Costs_v1.wsdl retrievedefaultrmrc osts_v1_docattach.w sdl RequestDefaultRMRCosts _v1.xsd DefaultRMRCosts_v1.xsd Fault faultreturntype StandardOutput.xsd 10.2 Default RMR Costs Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start End scheduling CoordinatorList Starting DateTime of the time period for which the data is Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. The unique identifier for a scheduling coordinator (SC). Page 34 of 127

35 resource The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) 10.3 Default RMR Costs Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload resource The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) Scheduling Coordinator The unique identifier for a scheduling coordinator (SC). tradedate The trade day to which the current record pertains (in California Prevailing Time). date intervalstarttime Start time of the market interval intervalendtime End time of the market interval minloadcost Default minimum load cost. float segmentnum The segment number for the startup cost curve. integer minutes Cooling time in minutes for the segment of the startup cost curve. float price Price in dollars for for the segment of the startup cost curve. float Page 35 of 127

36 11 Retrieve Expected Energy 11.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD RetrieveExpecte denergy Input Output RetrieveExpectedEn ergyrequest retrieveexpectedene rgy_docattachreque st RetrieveExpectedEn ergyresponse retrieveexpectedene rgy_docattachrespo nse RetrieveExpectedEne rgy _v1.wsdl retrieveexpectedener gy_v1_docattach.ws dl RetrieveExpectedEne rgy _v2.wsdl RequestExpectedEnergy_ v1.xsd RequestExpectedEnergy_ v2.xsd ExpectedEnergy _v1.xsd ExpectedEnergy _v2.xsd Fault faultreturntype retrieveexpectedener gy_v2_docattach.ws StandardOutput.xsd dl 11.2 Expected Energy Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start End scheduling CoordinatorList Starting DateTime of the time period for which the data is Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. The unique identifier for a scheduling coordinator (SC). Page 36 of 127

37 resourcelist The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) 11.3 Expected Energy Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload resource The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) configuration The unique identifier for a configuration of an MSG (multistage generator) resource. This element will be populated when the transaction applies to an MSG resource; otherwise this element will not be included in the output payload. Scheduling Coordinator The unique identifier for a scheduling coordinator (SC). tradedate The trade day to which the current record pertains (in California Prevailing Time). date intervalduration The duration of an interval in minutes (in California Prevailing Time). integer HR The hour of the trade day to which the current record pertains (in California Prevailing Time). integer Page 37 of 127

38 intervalnum The interval number. An interval represents a specific part of a trade hour to which the current record pertains. A trade hour may comprise of one or more intervals, of equal duration, based on the interval duration. For example, if the interval duration is 60 minutes, the trade hour will comprise of only one interval of 60 minutes. If, on the other hand, the interval duration is 15 minutes, the trade hour will comprise of four intervals of 15 minutes each. The intervals are numbered sequencially starting with the earliest one numbered 1. integer energy TypeCode Energy component for which the settlement allocation is based on. Examples are: Optimal Energy, Standard Ramping Energy, Ramping Energy Deviation, Residual Energy, Minimum Load Energy, SLIC Energy, Exceptional Dispatch Energy, RMR Energy, MSSLF Energy, Real-Time Self-Scheduled Energy, Pumping Energy, etc. te: For a listing of all of the valid EE types, reference The BPM for Market Operations, Appendix C, Section C.4 expectedenergy The expected energy value in MWH unit. float intervalstarttime Start time of the market interval intervalendtime End time of the market interval MSS-OE overlapping Indicates that the MSS load following energy overlaps with the optimal energy (Y/N) RTMarketType Real-time market type that distinguishes between 15 minute and 5 minute market results. Only applies to energytypecodes: MLE, SE, EDE, OE, PE, IIE. Valid values: FMM = Fifteen-minute market (15min) RTD = Real-time dispatch market (5min) Page 38 of 127

39 12 Retrieve Expected Energy Allocation Details 12.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD retrieveexpected EnergyAllocation Details Input Output RetrieveExpecteden ergyallocationdetails Request retrieveexpectedene rgyallocationdetails_ DocAttachRequest RetrieveExpectedEn ergyallocationdetails Response retrieveexpectedene rgyallocationdetails_ DocAttachResponse retrieveexpectedener gyallocationdetails_v 1.wsdl retrieveexpectedener gyallocationdetails_v 1_DocAttach.wsdl retrieveexpectedener gyallocationdetails_v 2.wsdl RequestExpectedEnergyA llocationdetails_v1.xsd RequestExpectedEnergyA llocationdetails_v2.xsd ExpectedEnergyAllocation Details_v1.xsd ExpectedEnergyAllocation Details_v2.xsd Fault faultreturntype retrieveexpectedener StandardOutput.xsd gyallocationdetails_v 2_DocAttach.wsdl 12.2 ExpectedEnergyAllocationDetails Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start End Starting DateTime of the time period for which the data is Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. Page 39 of 127

40 scheduling CoordinatorList The unique identifier for a scheduling coordinator (SC). marketservicetypeli st Market Service Type. Market Service Type depends on the SC s bid curve and market results. Valid values are ME (Market Energy Capacity), SR (Spin Capacity), NR (n-spin Capacity), DAC (Day-Ahead Energy Capacity), DEC (Derate Capacity), NO_BID (when no bid segment is associated with the record). resourcelist The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) energybidtype Distinguishes results that were based on final mitigated energy bid s (Final) or results that were based on default energy bids (Default); Valid values: Final or Default Only one type is allowed per request ExpectedEnergyAllocationDetails Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload resource The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) configuration The unique identifier for a configuration of an MSG (multistage generator) resource. This element will be populated when the transaction applies to an MSG resource; otherwise this element will not be included in the output payload. Page 40 of 127

41 Scheduling Coordinator The unique identifier for a scheduling coordinator (SC). tradedate The trade day to which the current record pertains (in California Prevailing Time). date intervalduration The duration of an interval in minutes (in California Prevailing Time). integer HR The hour of the trade day to which the current record pertains (in California Prevailing Time). integer intervalnum The interval number. An interval represents a specific part of a trade hour to which the current record pertains. A trade hour may comprise of one or more intervals, of equal duration, based on the interval duration. For example, if the interval duration is 60 minutes, the trade hour will comprise of only one interval of 60 minutes. If, on the other hand, the interval duration is 15 minutes, the trade hour will comprise of four intervals of 15 minutes each. The intervals are numbered sequencially starting with the earliest one numbered 1. integer marketservicetype Market Service Type. Market Service Type depends on the SC s bid curve and market results. Valid values are ME (for Market Energy Capacity), SR (for Spin Capacity), NR (for nspin Capacity), DAC (for Day-Ahead Energy Capacity), DEC (for Derate Capacity), NO_BID (when no bid segment is associated with the record). energytypecode Energy component for which the settlement allocation is based on. Examples are: Optimal Energy, Standard Ramping Energy, Ramping Energy Deviation, Residual Energy, Minimum Load Energy, SLIC Energy, Exceptional Dispatch Energy, RMR Energy, MSSLF Energy, Real-Time Self-Scheduled Energy, Pumping Energy, etc. te: For a listing of all of the valid EE types, reference The BPM for Market Operations, Appendix C, Section C.4 bidprice The price awarded per Market Service Type from the SC s Bid Curve in dollar $ unit float expectedenergy The expected energy value in MWH unit. float intervalstarttime Start time of the market interval intervalendtime End time of the market interval MSS-OE overlapping Indicates that the MSS load following energy overlaps with the optimal energy (Y/N) Page 41 of 127

42 energybidtype Distinguishes results that were based on final mitigated energy bid (Final) or results that were based on default energy bids (Default); Valid values: Final or Default As the request only allows one type, thus the output corresponds to the requested type either Final or Default datasets; ie output will not contain both types. RTMarketType Real-time market type that distinguishes between 15 minute and 5 minute market results. Only applies to energytypecodes: MLE, SE, EDE, OE, PE, IIE. Valid values: FMM = Fifteen-minute market (15min) RTD = Real-time dispatch market (5min) Page 42 of 127

43 13 Retrieve Finally Qualified Load Following Capacity 13.1 Operation Details The service has one operation with three message types. All input and output messages are in XML format. Operation Message Types Message WSDL XSD Retrieve Finally QualifiedLoadFoll owingcapacity Input RetrieveFinallyQualifi edloadfollowingcap acityrequest RetrieveFinallyQualifi edloadfollowingcap acity_v1.wsdl RequestFinallyQualifiedLo adfollowingcapacity_v1.x sd Output retrievefinallyqualifi edloadfollowingcap acity_docattachreq uest RetrieveFinallyQualifi edloadfollowingcap acityresponse retrievefinallyqualifie dloadfollowingcapa city_v1_docattach.ws dl FinallyQualifiedLoadFollo wingcapacity_v1.xsd retrievefinallyqualifi edloadfollowingcap acity_docattachres ponse Fault faultreturntype StandardOutput.xsd 13.2 Finally Qualified Load Following Capacity Request Element Table Message Header (optional) Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload Start Starting DateTime of the time period for which the data is Page 43 of 127

44 End Ending DateTime of the time period for which the data is Maximum of 31 days can be included in this report. markettypelist The identifier for the market type. Valid value is DAM (for day ahead market. scheduling CoordinatorList The unique identifier for a scheduling coordinator (SC). resourcetypelist The type of resource. valid values for this service are GEN & PUMP LFCTypeList This field indicates if the schedule is for Load Following Up or Load Following Down capacity. Valid values are UP (for Load Following Up Capacity) and DOWN (for Load Following Down Capacity). resourcelist The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) Page 44 of 127

45 13.3 Finally Qualified Load Following Capacity Response Element Table Message Header Source Source system which provides data for this service. Minor Identifier; Date reflecting the release this latest version update was related to. Message Payload resource The unique identifier for a resource. (InterTie resources can be either a registered resource id from MF or by a SIBR formed transaction ID) Scheduling Coordinator The unique identifier for a scheduling coordinator (SC). markettype The identifier for the market type. Valid value is DAM (for day ahead market) tradedate The trade day to which the current record pertains (in California Prevailing Time). date resourcetype The type of resource. The only valid value for this service is GEN (for a generating resource). intervalduration The duration of an interval in minutes (in California Prevailing Time). integer LFCType This field indicates if the schedule is for Load Following Up or Load Following Down capacity. Valid values are UP (for Load Following Up Capacity) and DOWN (for Load Following Down Capacity). HR The hour of the trade day to which the current record pertains (in California Prevailing Time). integer intervalnum The interval number. An interval represents a specific part of a trade hour to which the current record pertains. A trade hour may comprise of one or more intervals, of equal duration, based on the interval duration. For example, if the interval duration is 60 minutes, the trade hour will comprise of only one interval of 60 minutes. If, on the other hand, the interval duration is 15 minutes, the trade hour will comprise of four intervals of 15 minutes each. The intervals are numbered sequentially starting with the earliest one numbered 1. integer intervalstarttime Start time of the market interval Page 45 of 127