Software Release Notes

Transcription

1 Software Release Notes 24-February-2017 The Version and Build Number can be found in the Help menu, About ViewPoint window. Note: Build Release Date is encoded in the Build # in yyyymmdd format. For details or clarifications on any known issues please consult with Mesa Laboratories, Inc. development team. Version Build # Viewpoint.knob (Version 1.1.1; Build ) VSC.exe SMTPService.exe Modbus.exe vplamp.exe Java - (Version 8 Update 112) SQL Server 2014 Express x64 - (Version/Build ) New Features: Installer - disable Java auto updater (Story ID # ) Installer - Permit "No SQL" installations (Story ID # ) Blank alarm s when using SQL 2008 (Story ID # ). HTTP Connectors defaulted to 1 (Story ID # ) System Configuration Report fails to load when a calibration is applied (Story ID # ) Twilio vocal message of alarm reading is referenced incorrectly when not base unit (Story ID # ) Excel export for System Configuration report throws an error on file name (Story ID # ). Schedule Conflicts Warning shows assets that are disabled on Schedule and Notification List pages (Story ID # ). Intermittent scrolling issues on calibration page on an ipad (Story ID # )

2 Clicking Save button on System Configuration page without making changes will return to Home page (Story ID # ). Notifications are re-triggered when non-latching alarms are coming back into range via Emergency -> Standard -> Pre-Alarm path (Story ID # ). Schedule Windows not always drawn after creation of the schedule itself nor deleting allowed (Story ID # ). Min/Max values in the Summary section of Readings tab for G4 900MHz sensors are rounded to the second decimal place, and not honoring the configured resolution for the measurement type (Story ID # ). Version Build # Viewpoint.knob (Version ; Build ) VSC.exe SMTPService.exe Modbus.exe vplamp.exe Java - (Version 8 Update 112) SQL Server 2014 Express x64 - (Version/Build ) New Features: VSC s reflect timezone preference (Story ID # ) Updated VSC to support VPx sensors in network appliance mode (Story ID # # ) Change text on user setup page (Story ID # ) Allow the asset tag to be editable (Story ID # ) Temperature only works with Celsius as unit of measure (Story ID # ). Alert s do not send properly (Story ID # ) Data points precision incorrectly applied (Story ID # ) Temperature displayed incorrectly in Tile border (Story ID # ) Formatting text in /text message body is incorrect (Story ID # ) VSC s readings in base engineering unit (Story ID # ) Temperature readings do not scale for Kelvin or Fahrenheit in (Story ID # ). VPx binary inputs not working when not Door (Story ID # ) Invalid data on user profile allows the save button to be clicked and returned (Story ID # ). Invalid backchannel for VPx when binary input active (Story ID # ) Dry Contact (Normally Open) labels needs to be swapped (Story ID # )

3 Put a note on Default Time zone (Story ID # ) Alarm Threshold > 60 not working for Checkpoint sensors (Story ID # ) Creating PDF reports has issues with pagination (Story ID # ) The Viewpoint er service will crash when attempting to send an that contains more than 30 recipients (Story ID # ). A system running with 100+ assets will have increased response times to where UI may take 5 minutes to load elements that typically take 3-10 seconds (Story ID # ). One badly-formatted recipient causes batch to fail to send (Story ID # ) Excel export for System Configuration report throws an error on file name (Story ID # ). Schedule Conflicts Warning shows assets that are disabled on Schedule and Notification List pages (Story ID # ). Intermittent scrolling issues on calibration page on an ipad (Story ID # ) Clicking Save button on System Configuration page without making changes will return to Home page (Story ID # ). Notifications are re-triggered when non-latching alarms are coming back into range via Emergency -> Standard -> Pre-Alarm path (Story ID # ). Schedule Windows not always drawn after creation of the schedule itself nor deleting allowed (Story ID # ). Min/Max values in the Summary section of Readings tab for G4 900MHz sensors are rounded to the second decimal place, and not honoring the configured resolution for the measurement type (Story ID # ). Version 1.1 Build # Viewpoint.knob (Version 1.1 ; Build ) VSC.exe SMTPService.exe Modbus.exe vplamp.exe Java - (Version 8 Update 112) SQL Server 2014 Express x64 - (Version Build 10586) New Features: Added support for VPx wireless sensors (WiFi and 900MHz) Added support for VPx Access Points for 900Mhz Added support for VP Connect Panels (wired sensors) Units of measure can be specified at the input level (Story ID # ).

4 The Asset details on the Tile and List views (Tile Large and Extra Large Only) does expand details to include the notes field that is located in the Asset configuration section (Story ID # ). Remove Alarm Limit in Use checkbox located in the Inputs section of the Asset Configuration menu for Standard alarm type only (Story ID # ). Add checkbox to Disable VPx audible/visual alerts under the Inputs section of Asset configuration (Story ID # ). All configuration setting changes to the inputs on a VPx does require an electronic signature, shall be made from VPS and shall have an Audit Log entry (Story ID # ). Access Points located under the Configuration section is renamed to Network Devices (Story ID # ). Outbound Phone Notifications ( OPN ), utilizing VOIP text to voice to relay phone alarm notifications (Story ID # , , , ). VP Connect Non-Normal State Conditions (Story ID # ) Wired Probe Shorted (Story ID # ) VPx AC Power Lost (Story ID # ) VPx Low Battery Alarm (Story ID # ) The chart does include user-initiated printing of the chart (Story # ). Multiple point calibrations, allowing the ability to commit first calibration point, leave the calibration screen and come back to commit additional calibration points within seven calendar days following entry of the first calibration point (Story ID # , ). VPS does support VP Connect inputs, and does allow each Asset to consist of one or two numerical inputs and zero or one binary wired inputs. Additionally, VPS also does support an Asset to consist of the input(s) on a VPx sensor (Story ID # , , , ). Disabled Inputs still show up on Readings History and Current Readings Report (Story ID # ). Chart only renders on half of browser page (Story ID # ) Asset Tile details remain visible when tile is resized (Story ID # ) Summary Report daily statistics are repeated across days (Story ID # ) SMTP Service drops the first recipient and duplicates the last recipient in its place (Story ID # ). Out of range alarms occurring sooner than expected (Story ID # ) Excel export for System Configuration report throws an error on file name (Story ID # ). Schedule Conflicts Warning shows assets that are disabled on Schedule and Notification List pages (Story ID # ). Intermittent scrolling issues on calibration page on an ipad (Story ID # ) Clicking Save button on System Configuration page without making changes will return to Home page (Story ID # ). Notifications are re-triggered when non-latching alarms are coming back into range via Emergency -> Standard -> Pre-Alarm path (Story ID # ). Schedule Windows not always drawn after creation of the schedule itself nor deleting allowed (Story ID # ). Min/Max values in the Summary section of Readings tab for G4 900MHz sensors are rounded to the second decimal place, and not honoring the configured resolution for the measurement type (Story ID # ).

5 Version Build # Viewpoint.knob (Version ; Build ) VSC.exe SMTPService.exe Modbus.exe vplamp.exe Java - (Version 7 Update 67) SQL Server 2014 Express x64 - (Version Build 10586) 4-20 ma sensors not properly reporting alarms (ID # ) The SMTP server dropping the first recipient from the EML file and replacing it with the last recipient on the list. The physical EML file itself was correct, but when the SMTP Service would submit this , the error would occur (ID # ) Summary Report daily statistics are repeated across days (ID # ) Re-opening of the Calibration window for the most recent calibration of the same input does not allow saving. (ID # ) Calibration should not be allowed unless the current timestamp is greater than the date of last calibration + 2 logging interval. (# ) Audit Log currently does not distinguish between electronic signatures vs. standard actions (ID # ) Assets with a single binary input need to have a disabled numeric input as Input #1 (ID # ) Excel report for System Configuration throws an error on file name (ID # ) Schedule Conflicts Warning shows assets that are disabled on Schedule and Notification List pages (ID # ) Intermittent scrolling issues on calibration page on an ipad (ID # ) Version 1.0 Build # Initial Release of Version 1.0 Viewpoint.knob (Version 1.0 ; Build ) VSC.exe SMTPService.exe Modbus.exe vplamp.exe Java - (Version 7 Update 67)

6 ImageMagick - ( ) SQL Server 2014 Express x64 - (Version Build 10586) Re-opening of the Calibration window for the most recent calibration of the same input does not allow saving. (ID # ) Calibration should not be allowed unless the current timestamp is greater than the date of last calibration + 2 logging interval. (ID # ) Audit Log currently does not distinguish between electronic signatures vs. standard actions (Story ID # ) Assets with a single binary input need to have a disabled numeric input as Input #1 (ID # ) Excel report for System Configuration throws an error on file name (ID # ) Schedule Conflicts Warning shows assets that are disabled on Schedule and Notification List pages (ID # ) Intermittent scrolling issues on calibration page on an ipad (ID # )