Quick Installation Guide

Transcription

1 Quick Installation Guide Before starting with Easy School installation please check : Verify there is a Sound Card with recordering proof of MIC using Sound recorder of Windows (you should hear recording done) Make sure your PC / Notebook teacher has: Network adapter with a static IP address assigned, eg xxx.xxx (students will have the same IP family) The WI-FI card is DISABLED (not only turned off) Firewall public and private DISABLED (then insert the exceptions as necessary to reactivate the same). After installation if the pc of the students does not connect, if there is an Antivirus enter the exceptions to all executable.exe inside the folder C:\Program Files (x86)\easy School Net Evolution \Teacher For the resolution of any problems read at the bottom of this guide the F.A.Q..

2 Start the Setup file Teacher.exe Click on Next Accept the agreement Choose the destination folder for the program or use the default one. Click on NEXT

3 Wait for the installation to complete (it may take several minutes, do not quit the installation!) Click InstallDriver to install driver of USB KEY Driver Installation go fine Clicca su Exit

4 Click it to overwrite the file with a newer one. We proceed with the mapping of the Audio: Select LINE IN for Line IN of Sound Card, if you use a Notebook please choose MIC.

5 Click on <Load Dufault>

6 After completing the Audio tab settings, continue with the installation of the package Visual Studio ONLY for Windows (R) XP or Vista to Windows7 and about Windows8 and Windows 10 click CANCEL, you do not need, the possible installation however, does not bring problems. Select the channel of the class, students should have the same teacher channel Installazione Completed!!!

7 Easy School Net Evolution is set by default to operate via cable. If you use a WLAN, you must set to optimize Audio-Video streams Click on Setting WI-FI Change setting as image: Restart the Teacher Easy School Net Evolution program to activate the changes! Below some examples of connection in WI-FI. Fig.1 Fig.2 Fig.3 Example of Stand Alone Connection

8 F.A.Q. Easy School Net Problem Teacher don't start. Students are not automatically detected in the main program screen and the icons are gray. When the program starts appears the message "Demo license for 4 students." When you start the Teacher are shown up to 20 PC students. Teacher black screen on students or slowed. The screen of the Teacher is sent greater or smaller to students Multimedia file is not transmitted or is slow The teacher does not send the microphone The Teacher not send PC audio EXAM / TRANSFER FILE MODULE The test is not saved Teacher Solution Start as Administrator. Check for the Sound Card with evidence of MIC recording using Windows Sound Recorder (you must be able to listen to the recording made). Uninstall the Teacher and clear the folder Programs / Easy School Install the program again Disable, if present, the wireless card in the students and teacher. Assign a static IP address progressive example: xxx.xxx network adapters students and teacher. Disable the Firewall on public and private networks and Antivirus (then insert the exceptions as necessary to reactivate the same). Make sure that students have the same ID of the Class Teacher. If necessary, change the ID by assigning a different numbering of an existing class with ID 2 to 200 (this is possible only if they are in use in more than one class the same LAN). Check the network connection with the PING command. Check for SWITCH Manager or router that can block the flow or Multimedia Multicast. Test the connection between the teacher and a student with a cross cable or another switch. Insert the USB Dongle of the license issued at the time of purchase, on a USB port valid. Install the driver inside the program Easy School / teacher in the [DOG] then install the driver DogInst.exe for KEY to 8 numbers or MicroDogInstdrv.exe for KEY to 6 numbers. Close the software Easy School and restart the program. Click on START / EXIT> Configuration Class> Edit and enter the number of students correct, quit WITHOUT save the class in use, restart the Teacher. Or click on the "+" in the upper right of the screen to add Teacher and a student at a time, at the end, close and save the class. Disable the function AERO on the Monitor Properties, and set a background with Solid Color. Set the network adapter to 100Mbps Full Duplex. Adjust the resolution of both the teacher and for all students. Send the video using the appropriate command Digital Audio Video and not by sending the Desk Teacher. Select a format Audio-Video valid. (sometimes AVI have a compression unsuitable) Check for the Sound Card with evidence of MIC recording using Windows Sound Recorder (you must be able to listen to the recording made). Adjust the audio settings on Settings and videomapping the teacher (see Manual) setting MIC = MIC of the sound card in use Verify that the Audio tab is FULL DUPLEX and having the Stereo MIX enabled. Adjust the audio control clicking on Settings followed Audiomapping the teacher setting PC = Stero Mix the Sound Card in use (see Manual) Check that all the required data in the preparation of applications were entered. The test or files are not sent to some or all students Problem Students do not connect to the Teacher It is unable to communicate with the teacher via student microphone When the teacher active sending the microphone audio you hear Make sure the firewall are disabled in the public network, and private domain. If necessary if after disabling Firewall everything is functioning insert exceptions inserting executables on Teach and Student. STUDENT Solution Disable this if the wireless card in the students and teacher. Assign a static IP address progressive example: xxx.xxx network cards and taught students. Disable the Firewall on public and private networks and Antivirus (then insert the exceptions as necessary to reactivate the same). Check whether the students have the same ID of the Class Teacher. may vary IDs by assigning a different numbering of an existing class with ID 2 to 200 (this is only possible if you use the same network more classes). Check the network connection with the PING command. Check for SWITCH Manager or router that block the flow or Multimedia Multicast. Test the connection between the teacher and a student with a cross cable or another switch. Check for the Sound Card with evidence of MIC recording using Windows Sound Recorder (you must be able to listen to the recording made). Check whether the headphone switch is ON Adjust the audio settings on Settings and videomapping on Education, (see

9 Manual) by setting the MIC = MIC and PC = Stereo Mix, the Sound Card in use. Check and increase the volume of the headset. Computer audio Teacher does not reach students The Monitor Teacher is too big or smaller Monitor the student does not come to the Teacher or get black. Verify that the Audio tab is FULL DUPLEX and having the Stereo MIX enabled. Adjust the audio control clicking on Settings followed Audio-mapping the teacher setting PC = Stereo Mix the Sound Card in use (see Manual) Set the monitor with the same resolution as the Teacher PC Disable the function on AERO Properties Monitor and set a background with Solid Color. Set the network adapter to 100Mbps Full Duplex.