CA Workload Automation ESP Edition CA RS 1406 Service List

Transcription

1 CA Workload Automation ESP Edition CA RS 1406 Service List Description Type 11.4 RO68279 TRUNCATED OUTPUT FROM RESDEF COMMAND PTF RO68745 ABEND0C4 IN CYBESUT3 *HIP/PRP* RO68947 INFORMATICA JOB TYPE PTF RO69111 WRONG ORDER OF JOBS IN SIMULATION PTF RO69717 CYBESUT3 ENHANCEMENT PTF RO70005 ZIIP ENABLED ESPWSS ABENDS WITH S46D PTF RO70061 PROPAGATING RESOURCE COUNTERS PTF RO70124 MICROFOCUS JOB TYPE PTF RO70180 DYNAMIC AGENT CONFIGURATION PTF The CA RS 1406 service count for this release is 9

2 CA Workload Automation ESP Edition CA RS 1406 Service List Description Type 11.3 RO69666 JOB REMAINS IN ANC_WAIT STATUS PTF RO69711 CYBESUT3 enhancement. PTF RO69907 UNINITIALIZED ESPAPFULLNAME VARIABLE PTF RO70250 ABEND0C4 IN CYBESUT3 **HIPER** RO70366 JOBTREE WITH FULL JOBNAME PTF RO70495 NEW ESP6128I MESSAGE PTF The CA RS 1406 service count for this release is 6

3 CA Workload Automation ESP Edition 3 CA RS 1406 Service List for CD7YB30 FMID Service Description Type CD7YB30 RO69666 JOB REMAINS IN ANC_WAIT STATUS PTF RO69711 CYBESUT3 enhancement. PTF RO69907 UNINITIALIZED ESPAPFULLNAME VARIABLE PTF RO70250 ABEND0C4 IN CYBESUT3 **HIPER** RO70366 JOBTREE WITH FULL JOBNAME PTF The CA RS 1406 service count for this FMID is 5

4 CA Workload Automation ESP Edition 4 CA RS 1406 Service List for CD7YB40 FMID Service Description Type CD7YB40 RO68279 TRUNCATED OUTPUT FROM RESDEF COMMAND PTF RO68745 ABEND0C4 IN CYBESUT3 *HIP/PRP* RO68947 INFORMATICA JOB TYPE PTF RO69111 WRONG ORDER OF JOBS IN SIMULATION PTF RO69717 CYBESUT3 ENHANCEMENT PTF RO70005 ZIIP ENABLED ESPWSS ABENDS WITH S46D PTF RO70061 PROPAGATING RESOURCE COUNTERS PTF RO70124 MICROFOCUS JOB TYPE PTF RO70180 DYNAMIC AGENT CONFIGURATION PTF The CA RS 1406 service count for this FMID is 9

5 CA Workload Automation ESP Edition 5 CA RS 1406 Service List for CD9EB30 FMID Service Description Type CD9EB30 RO70495 NEW ESP6128I MESSAGE PTF The CA RS 1406 service count for this FMID is 1

6 CA Workload Automation ESP Edition CA RS PTF RO RO68279 RO68279 M.C.S. ENTRIES = ++PTF (RO68279) TRUNCATED OUTPUT FROM RESDEF COMMAND PROBLEM DESCRIPTION: The output of OPER commands, including RESDEF, is limited by the value of the ESP initialization parameter APPLBUF. If there is a large number of resources, the APPLBUF size may be too small to accommodate the entire resource list. This fix increases the limit on OPER output to 16 megabytes regardless of the APPLBUF setting. SYMPTOMS: The RESDEF output begins with message ESP7369W The output has been truncated IMPACT: The full resource list cannot be displayed by RESDEF command CIRCUMVENTION: PRODUCTS AFFECTED: CA Workload Automation EE r11.3 CA Workload Automation EE r11.4 Star Problem(s): ESPWA 1571 Copyright (C) 2014 CA. All rights reserved. R00600-D7Y114-SP1 DESC(TRUNCATED OUTPUT FROM RESDEF COMMAND). ++VER (Z038) FMID (CD7YB40) PRE ( RO54033 ) SUP ( RO50041 TR49922 TR50041 TR68279 )

7 CA Workload Automation ESP Edition CA RS PTF RO RO68745 RO68745 M.C.S. ENTRIES = ++PTF (RO68745) ABEND0C4 IN CYBESUT3 PROBLEM DESCRIPTION: A batch job running utility CYBESUT3 ends with ABEND0C4, when it hits an application with jobs in the ANC_WAIT status. This is caused by an error in PTF RO SYMPTOMS: CYBESUT3 ends with ABEND0C4. IMPACT: Inability to copy/merge APPLFILE & JOBINDEX. CIRCUMVENTION: None. PRODUCTS AFFECTED: CA Workload Automation ESP Edition r11.4 Star Problem(s): ESPWA 1578 Copyright (C) 2014 CA. All rights reserved. R00614-D7Y114-SP1 DESC(ABEND0C4 IN CYBESUT3). ++VER (Z038) FMID (CD7YB40) PRE ( RO67015 ) SUP ( AR67015 TR68679 TR68745 )

8 CA Workload Automation ESP Edition CA RS PTF RO RO68947 RO68947 M.C.S. ENTRIES = ++PTF (RO68947) INFORMATICA JOB TYPE PROBLEM DESCRIPTION: A new module is created to provide support for the INFORMATICA Agent. SYMPTOMS: There is no dedicated CA Workload Automation ESP Edition module providing support for the INFORMATICA Agent. IMPACT: The INFORMATICA Agent is supported by CA Workload Automation ESP Edition. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: CA Workload Automation ESP Edition Release 11.4 Star Problem(s): ESPWA 1580 Copyright (C) 2014 CA. All rights reserved. R00619-D7Y114-SP1 DESC(INFORMATICA JOB TYPE). ++VER (Z038) FMID (CD7YB40) SUP ( TR68947 ) ++HOLD (RO68947) SYSTEM FMID(CD7YB40) REASON (ACTION ) DATE (14107) COMMENT ( +-+ CA ESP WORKLOAD AUTOMATION Release 11.4 SEQUENCE After Apply PURPOSE CA Workload Automation ESP Edition will be able to process the Informatica Job Type. USERS AFFECTED All Informatica users. KNOWLEDGE REQUIRED CA Workload Automation ESP Edition Product Administration. ACCESS REQUIRED CA Workload Automation ESP Edition Initialization library. ************************** * STEPS TO PERFORM * ************************** 1. Issue WOBDEF LOAD(CYBESOIJ) command. 2. Add CYBESOIJ to the WOBDEF LOAD initialization parameter. ).

9 CA Workload Automation ESP Edition CA RS PTF RO RO69111 RO69111 M.C.S. ENTRIES = ++PTF (RO69111) WRONG ORDER OF JOBS IN SIMULATION PROBLEM DESCRIPTION: The job names in the row 'JOBS:' in the output of simulation are mixed with job names from the SUBMIT command. This fix orders the job names according to the definitions in the application and separates the job names from the SUBMIT command to a different row 'JOBS (SUBMIT COMMAND):'. SYMPTOMS: The job names in the row 'JOBS:' are not in order according to definitions in the application. IMPACT: The order of job names in the row 'JOBS:' could lead to confusion. CIRCUMVENTION: None PRODUCTS AFFECTED: CA Workload Automation EE r11.3 CA Workload Automation ESP Edition r11.4 Star Problem(s): ESPWA 1458 Copyright (C) 2014 CA. All rights reserved. R00625-D7Y114-SP1 DESC(WRONG ORDER OF JOBS IN SIMULATION). ++VER (Z038) FMID (CD7YB40) PRE ( RO50049 RO56359 RO59790 RO63606 RO66165 ) SUP ( RO51440 RO51488 RO52776 RO55156 RO57345 RO57479 TR45665 TR51440 TR51488 TR52776 TR54997 TR55156 TR57345 TR57479 TR59472 TR66259 TR66479 TR66514 TR69111 )

10 CA Workload Automation ESP Edition CA RS PTF RO RO69717 RO69717 M.C.S. ENTRIES = ++PTF (RO69717) CYBESUT3 ENHANCEMENT PROBLEM DESCRIPTION: CYBESUT3 enhancement. 1. The user will not have to start ESP quiesced in order to format a new application file during CYBESUT3 processing anymore. CYBESUT3 will have built-in application file format capabilities. The new optional parameter SLOTSIZE will be introduced to support this feature. If the output application file is not formatted, CYBESUT3 will format it using the slot size provided. If slot size is not explicitly provided, then the input application file slot size will be used for the output application file slot size. 2. The user will be able to update the existing JOBINDEX file in-place instead of creating a new JOBINDEX file, if requested. The new optional parameter NONEWINDEX will be introduced to support this feature. Syntax: CYBESUT3 APPLFILE(applfile) JOBINDEX(jobindex) NEWAPPL(newapplfile) <SLOTSIZE(n)> <NEWINDEX(newjobindex) NONEWINDEX > <ANALYZE> NONEWINDEX Indicates the jobindex file in-place update request, and is mutually exclusive with NEWINDEX parameter. n - is rounded up to the nearest multiple of The sample member CYBESS18 describing the CYBESUT3 JCL has been updated to reflect these changes. SYMPTOMS: None. IMPACT: None. CIRCUMVENTION: None. PRODUCTS AFFECTED: CA Workload Automation EE r11.3 CA Workload Automation ESP Edition r11.4 Star Problem(s): ESPWA 1520 Copyright (C) 2014 CA. All rights reserved. R00631-D7Y114-SP1 DESC(CYBESUT3 ENHANCEMENT). ++VER (Z038) FMID (CD7YB40) PRE ( RO67015 ) SUP ( AR67015 RO68745 TR68679 TR68745 TR69717 )

11 CA Workload Automation ESP Edition CA RS PTF RO RO70005 RO70005 M.C.S. ENTRIES = ++PTF (RO70005) ZIIP ENABLED ESPWSS ABENDS WITH S46D PROBLEM DESCRIPTION: A ziip-enabled Workstation Server (WSS) will abend with S46D and subsequent U914 if a Workstation user attempts to generate and sort a history report. This fix corrects the problem. SYMPTOMS: The Workstation Server (WSS) is ziip-enabled and it abends with S46D and subsequent U914. IMPACT: The Workstation Server (WSS) abends. CIRCUMVENTION: Remove the ZIIP parameter from the Workstation Server (WSS) STC. PRODUCTS AFFECTED: CA Workload Automation ESP Edition r11.4 Star Problem(s): ESPWA 1461 Copyright (C) 2014 CA. All rights reserved. R00646-D7Y114-SP1 DESC(ZIIP ENABLED ESPWSS ABENDS WITH S46D). ++VER (Z038) FMID (CD7YB40) SUP ( TR60808 TR62036 TR65499 TR70005 )

12 CA Workload Automation ESP Edition CA RS PTF RO RO70061 RO70061 M.C.S. ENTRIES = ++PTF (RO70061) PROPAGATING RESOURCE COUNTERS PROBLEM DESCRIPTION: To coordinate workload between ESP masters, if a specific resource count is updated, a notification message will be sent to all relevant ESP masters. SYMPTOMS: No workload coordination is occuring between ESP masters. IMPACT: An ESP master will be notified if a different ESP master has changed a specific resource count; this information will be used for controlling job submission. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: CA Workload Automation ESP Edition Release 11.4 Star Problem(s): ESPWA 1564 Copyright (C) 2014 CA. All rights reserved. R00649-D7Y114-SP1 DESC(PROPAGATING RESOURCE COUNTERS). ++VER (Z038) FMID (CD7YB40) PRE ( RO48860 RO62660 RO67513 ) SUP ( RO58765 RO60956 TR48242 TR48841 TR48854 TR58765 TR60956 TR68870 TR70003 TR70061 )

13 CA Workload Automation ESP Edition CA RS PTF RO RO70124 RO70124 M.C.S. ENTRIES = ++PTF (RO70124) MICROFOCUS JOB TYPE PROBLEM DESCRIPTION: CA Workload Automation ESP Edition is enhanced to add support for the MICROFOCUS Agent. SYMPTOMS: There is no support in CA Workload Automation ESP Edition for the MICROFOCUS Agent. IMPACT: MICROFOCUS Agent is supported by CA Workload Automation ESP Edition. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: CA Workload Automation ESP Edition Release Star Problem(s): ESPWA 1543 Copyright (C) 2014 CA. All rights reserved. R00653-D7Y114-SP1 DESC(MICROFOCUS JOB TYPE). ++VER (Z038) FMID (CD7YB40) SUP ( TR69317 TR69774 TR69898 TR69902 TR70124 ) ++HOLD (RO70124) SYSTEM FMID(CD7YB40) REASON (ACTION ) DATE (14134) COMMENT ( +-+ CA ESP WORKLOAD AUTOMATION Release 11.4 SEQUENCE After Apply PURPOSE CA Workload Automation ESP Edition will be able to process the MicroFocus Job Type. USERS AFFECTED All MicroFocus users. KNOWLEDGE REQUIRED CA Workload Automation ESP Edition Product Administration. ACCESS REQUIRED CA Workload Automation ESP Edition Initialization library. ************************** * STEPS TO PERFORM * ************************** 1. Issue WOBDEF LOAD(CYBESOMF) command. 2. Add CYBESOMF to the WOBDEF LOAD initialization parameter. ).

14 CA Workload Automation ESP Edition CA RS PTF RO RO70180 RO70180 M.C.S. ENTRIES = ++PTF (RO70180) DYNAMIC AGENT CONFIGURATION PROBLEM DESCRIPTION: The AGENT operator command has been enhanced to support dynamic agent configuration. Agent definitions can now be dynamically created, modified and deleted. An agent definition is dynamically created by the AGENT DEFINE command. The AGENT DEFINE command syntax is - AGENT name DEFINE ADDRESS(address) PORT(port) ÝASCII EBCDIC - ÝÝENCRYPT KEYNAME(keyname) - ÝRETRYINTERVAL(interval) ÝFAILOVER - ÝTYPE(type) ÝDESCRIPTION(description) An agent definition is dynamically modified by the AGENT SET command. The AGENT SET command syntax is - AGENT name SET ÝADDRESS(address) ÝPORT(port) ÝASCII EBCDIC - ÝÝENCRYPT KEYNAME(keyname) NOENCRYPT - ÝRETRYINTERVAL(interval) ÝFAILOVER NOFAILOVER - ÝTYPE(type) ÝDESCRIPTION(description) An agent definition is dynamically deleted by the AGENT DELETE command The AGENT DELETE command syntax is - AGENT name DELETE New optional filtering operands have been added to the AGENT LIST command. The AGENT LIST command syntax is - AGENT name ÝLIST ÝADDRESS(address) ÝPORT(port) ÝASCII EBCDIC - ÝÝENCRYPT ÝKEYNAMEÝ(keyname) CLEARKEY NOENCRYPT - ÝRETRYINTERVAL(interval) ÝFAILOVER NOFAILOVER - ÝTYPE(type) ÝDESCRIPTION(description) ÝDUMP In the above command syntax descriptions - name - specifies the agent name. address - specifies the IP address or DNS hostname of the agent host. port - specifies the TCP port number that the agent listens on. keyname - specifies an encryption keyname that was created by the CRYPTKEY DEFINE command. interval - specifies a retry interval in hundreds of a second. If 0 is specified, a default value of (2 minutes) is used. type - specifies a 1-16 character type tag string. If the string is quoted, blanks are permitted. description - specifies a 1-64 character description tag string. If the string is quoted, blanks are permitted. The AGENTDEF file AGENT command has two new optional operands - TYPE(type) DESCRIPTION(description) type - specifies a 1-16 character type tag string. If the string is quoted, blanks are permitted. description - specifies a 1-64 character description tag string. If the string is quoted, blanks are permitted. A new SAVEAGDF operator command has been added to save the current agent definitions into a specified data set with AGENTDEF commands that may later be restored with the LOADAGDF command. The SAVEAGDF command syntax is - SAVEAGDF 'dsnameý(member) ' dsname - specifies the name of the data set into which the agent definitions will be saved. The data set can be a PDS (with "member" specified), a sequential data set or a VSAM ESDS. member - specifies the name of the member into which the agent definitions will be saved. It must be specified if "dsname" specifies a PDS. SYMPTOMS: None.

15 CA Workload Automation ESP Edition CA RS PTF RO70180 IMPACT: None. CIRCUMVENTION: None. PRODUCTS AFFECTED: CA Workload Automation ESP Edition r11.4 Star Problem(s): ESPWA 1512 Copyright (C) 2014 CA. All rights reserved. R00655-D7Y114-SP1 DESC(DYNAMIC AGENT CONFIGURATION). ++VER (Z038) FMID (CD7YB40) PRE ( RO50241 RO54033 RO59429 RO62660 RO63037 RO67085 ) SUP ( RO56101 RO65468 RO67799 TR56101 TR65392 TR65468 TR67123 TR67799 TR68198 TR68202 TR68218 TR68250 TR68436 TR68529 TR68570 TR68625 TR68634 TR68636 TR68638 TR70071 TR70180 )

16 CA Workload Automation ESP Edition CA RS PTF RO RO69666 RO69666 M.C.S. ENTRIES = ++PTF (RO69666) DESC (JOB REMAINS IN ANC_WAIT STATUS) /* PRODUCT: CA ESP Workload Automation RELEASE: 11.3 DATE: 25 APR 2014 HYPER: NO STARTRAK PROBLEM PRODUCT NAME: ESPWA PROBLEM NUMBER: 1459 JOB REMAINS IN ANC_WAIT STATUS A job in an application defined with the JOB_ANCESTOR_WAIT(ANY) parameter is not released even if all jobs with the same name are completed in previous generations of the application. The RERUNM command used with an ancestor of the job may cause the current job to persist in ANC_WAIT status until it is manually released. This fix ensures the job is correctly released. PROBLEM RESOLUTION: Apply the following PTF to the system. Warm restart CA Workload Automation EE subsystems. ***NOTE*** Retain the printed output for reference */. ++VER (Z038) FMID(CD7YB30) PRE (RO67877) SUP (T5SK067).

17 CA Workload Automation ESP Edition CA RS PTF RO RO69711 RO69711 M.C.S. ENTRIES = ++PTF (RO69711) DESC (CYBESUT3 enhancement.) /* PRODUCT: CA Workload Automation EE RELEASE: 11.3 DATE: 28 APR 2014 HYPER: NO STARTRAK PROBLEM PRODUCT NAME: ESPWA PROBLEM NUMBER: 1520 CYBESUT3 enhancement. 1. The user no longer has to start ESP quiesced to format a new application file during CYBESUT3 processing. CYBESUT3 now has built-in application file format capabilities. The new optional parameter SLOTSIZE supports this feature. If the output application file is not formatted, CYBESUT3 will format it using the slot size provided. If the slot size is not explicitly provided, the input application file slot size will be used for the output application file slot size. 2. The user will be able to update the existing JOBINDEX file in-place instead of creating a new JOBINDEX file, if requested. The new optional parameter NONEWINDEX supports this feature. Syntax CYBESUT3 APPLFILE(applfile) JOBINDEX(jobindex) NEWAPPL(newapplfile) <SLOTSIZE(n)> <NEWINDEX(newjobindex) NONEWINDEX > <ANALYZE> NONEWINDEX Indicates the jobindex file in-place update request, and is mutually exclusive with NEWINDEX parameter. n - is rounded up to the nearest multiple of Sample member CYBESS18 describing the CYBESUT3 JCL has been updated to reflect these changes. PROBLEM RESOLUTION: Apply the following PTF to the system. ***NOTE*** Retain the printed output for reference */. ++VER (Z038) FMID(CD7YB30) PRE (RO67877) SUP (T5HZ042). ++HOLD(T5HZ042) FMID(CD7YB30) SYSTEM REASON(DOC) COMMENT(This enhancement includes updated CYBESS18 sample member. Code BYPASS(HOLDSYS) on your APPLY/ACCEPT statement to bypass this hold.).

18 CA Workload Automation ESP Edition CA RS PTF RO RO69907 RO69907 M.C.S. ENTRIES = ++PTF (RO69907) DESC (UNINITIALIZED ESPAPFULLNAME VARIABLE) /* PRODUCT: CA Workload Automation EE RELEASE: 11.3 DATE: 6 MAY 2014 HYPER: NO STARTRAK PROBLEM PRODUCT NAME: ESPWA PROBLEM NUMBER: 1454 UNINITIALIZED ESPAPFULLNAME VARIABLE The value of the ESPAPFULLNAME variable is not properly initialized. Passing this variable to length-limited parameters can cause errors during event processing. This fix properly initializes the variable so that its length can be calculated correctly. PROBLEM RESOLUTION: Apply the following PTF to the system. Warm restart CA Workload Automation EE subsystems. TSO users reenter ESP sessions. ***NOTE*** Retain the printed output for reference */. ++VER (Z038) FMID(CD7YB30) PRE (RO67097,RO67444) SUP (T5TX043).

19 CA Workload Automation ESP Edition CA RS PTF RO RO70250 RO70250 M.C.S. ENTRIES = ++PTF (RO70250) DESC (ABEND0C4 IN CYBESUT3) /* PRODUCT: CA Workload Automation EE RELEASE: 11.3 DATE: 20 MAY 2014 HYPER: YES STARTRAK PROBLEM PRODUCT NAME: ESPWA PROBLEM NUMBER: 1578 ABEND0C4 IN CYBESUT3 A batch job running utility CYBESUT3 ends with ABEND0C4, when it hits an application with jobs in the ANC_WAIT status. This is caused by an error in PTF RO PROBLEM RESOLUTION: Apply the following PTF to the system. Warm restart CA ESP Workload Automation subsystems */. ++VER (Z038) FMID(CD7YB30) PRE (RO69711) SUP (T5G9134,AR67877).

20 CA Workload Automation ESP Edition CA RS PTF RO RO70366 RO70366 M.C.S. ENTRIES = ++PTF (RO70366) DESC (JOBTREE WITH FULL JOBNAME) /* PRODUCT: CA Workload Automation EE RELEASE: 11.3 DATE: 23 MAY 2014 HYPER: NO STARTRAK PROBLEM PRODUCT NAME: ESPWA PROBLEM NUMBER: 1569 JOBTREE WITH FULL JOBNAME The JOBTREE command did not support the full job name in parameter JOB(). The fix allows supporting the full job name in parameter JOB() of the JOBTREE command. PROBLEM RESOLUTION: Apply the following PTF to the system. ***NOTE*** Retain the printed output for reference */. ++VER (Z038) FMID(CD7YB30) PRE (RO66054) SUP (T5SK077).

21 CA Workload Automation ESP Edition CA RS PTF RO RO70495 RO70495 M.C.S. ENTRIES = ++PTF (RO70495) DESC (NEW ESP6128I MESSAGE) /* PRODUCT: CA Workload Automation EE CPE RELEASE: 11.3 DATE: 29 MAY 2014 HYPER: NO STARTRAK PROBLEM PRODUCT NAME: ESPCPE PROBLEM NUMBER: 231 NEW ESP6128I MESSAGE In some schedule criteria specifications, the 'OF' or 'WITHIN' keyword is required to restrict scheduling action to specific time periods. For example, the statement '3RD SAT OF FEB MAY' requests scheduling on the 3rd Saturday of February and May. If the statement is specified as '3RD SAT FEB MAY' (with 'OF' omitted) the keywords following SAT are ignored, and the statement is processed as if only '3RD SAT' was specified. Therefore the action will be performed on the 3rd Saturday of every month instead of the 3rd Saturday of February and May. The fix introduces an information message ESP6128I Message: 6128I 'OF' or 'WITHIN' keyword is missing, specified period is ignored Explanation: The 'OF' and 'WITHIN' keywords restrict scheduling actions to a specific time period (or time periods). Omitting the keyword where it should be specified causes the criteria following where one of the keywords should have been placed to be ignored. System Action: The specified time period and rest of statement following where an 'OF' or 'WITHIN' keyword should have been placed in scheduling criteria, is ignored. User Response: Add the 'OF' or 'WITHIN' keyword if intended, or delete the rest of the time statement. PROBLEM RESOLUTION: Apply the following PTF to the system. Warm restart CA Workload Automation EE subsystems. ***NOTE*** Retain the printed output for reference */. ++VER (Z038) FMID(CD9EB30) PRE (RO59614) SUP (T5SK065). ++HOLD(T5SK065) FMID(CD9EB30) SYSTEM REASON(DOC) COMMENT(This fix includes new message CYB6128. Code BYPASS(HOLDSYS) on your APPLY/ACCEPT statement to bypass this hold.).