CA Spool Java Transformers CA RS 1306 Service List

Transcription

1 CA Spool Java Transformers CA RS 1306 Service List Description Hiper 11.7 RO51514 AFP TO PCL - INCORRECT OVERLAY IS BEING USED RO54588 ORIENTATION SPECIFIED IN MEDIUM MAP IS NOT USED RO55293 METACODE TO PDF - JAVA TRANSFORMER HANGS AND NEVER ENDS The CA RS 1306 service count for this release is 3

2 CA Spool Java Transformers 2 CA RS 1306 Service List for CE0CB70 FMID Service Description Hiper CE0CB70 RO51514 AFP TO PCL - INCORRECT OVERLAY IS BEING USED RO54588 ORIENTATION SPECIFIED IN MEDIUM MAP IS NOT USED RO55293 METACODE TO PDF - JAVA TRANSFORMER HANGS AND NEVER ENDS The CA RS 1306 service count for this FMID is 3

3 CA Spool Java Transformers CA RS PTF RO RO51514 RO51514 M.C.S. ENTRIES = ++PTF (RO51514) AFP TO PCL - INCORRECT OVERLAY IS BEING USED When the CA Spool Java Transformers are used to transform an AFP file which refers to a form definition 'FormDef' containing several SUBGROUPS an incorrect overlay is being used. This problem appears only when the CA Spool AFP to PCL Java Transformer option is used. Pages are transformed incorrectly and some of them have an incorrect overlay. End user is not able to transform all pages correctly. PRODUCT(S) AFFECTED: CSPOOL 1710 LINES AND PAGES IGNORED IN TRANSFORMATION Several problems occur when transforming to PDF using a formdef that contains subgroups. The first line of a page is ignored and any page that contained 1 line of data is missing. Pages in the PDF file are transformed incorrectly. The results of the PDF file generated are not as expected. CSPOOL 1712 CUMULATIVE CHANGES TO JAVA TRANSFORMER INTERFACE Several issues were reported for CA Spool's Java transformer interface. The transform interface vendor has made cumulative maintenance available for CA Spool's Java transformer interface. The build level of the transformer can be verified by looking at the.rpt file. The following statement is displayed at the top of the.rpt file: Version: , (BuildDate ) CSPOOL 1713 AFP TO PCL - PAGE ORIENTATION LANDSCAPE INSTEAD OF PORTRAIT When the CA Spool AFP to PCL Transformer option is used to transform an AFP file and "Orientation = Landscape" setting is specified on the printer, the document is printed landscape even if the AFP resources contain definitions for portrait orientation. This problem appears only when the CA Spool Java Transformers are used. The document is printed landscape even if the AFP resources contain definitions for portrait orientation. The document cannot be printed correctly.

4 CA Spool Java Transformers CA RS PTF RO51514 Set "Orientation = Portrait" in the printer settings. CSPOOL 1718 Copyright (C) 2013 CA. All rights reserved. R00009-E0C117-SP1 DESC(AFP TO PCL - INCORRECT OVERLAY IS BEING USED). ++VER (Z038) FMID (CE0CB70) PRE ( RO42958 RO47236 RO49626 RO50093 RO50480 ) SUP ( TR51514 ) ++HOLD (RO51514) SYSTEM FMID(CE0CB70) REASON (ACTION ) DATE (13008) COMMENT ( This solution provides CE0CDATA member D2ENGTAR and contains Java Transformers engine build It requires RO42903 which provides CBQ4JCL member BQ4JJTAX. BQ4JJTAX is the JCL to restore D2ENGTAR and update the CA Spool Java Transformers engine. Please follow the instructions in BQ4JJTAX to restore the CA Spool Java Transformers engine and update CAIQENVA member in CAI.CBQ4PARM. ).

5 CA Spool Java Transformers CA RS PTF RO RO54588 RO54588 M.C.S. ENTRIES = ++PTF (RO54588) ORIENTATION SPECIFIED IN MEDIUM MAP IS NOT USED When an AFP file is sent for transformation without page definition specified on the JCL output statement, the output file has a wrong page orientation since the page orientation is picked up from the default page definition rather than from the medium map. This problem appears only when the CA Spool Java Transformers are used. The document is printed with another page orientation than desired. The document is not printed correctly. Modify the page definition element to contain page orientation as desired. CSPOOL 1741 AFP TO PCL - SCALING VALUE EXCEEDS 100% When the CA Spool AFP to PCL Transformer option is used to transform an AFP file, information about scaling higher than 100% may appear in the report file if TuningOption="ScaleOnly" parameter is specified in the project file. Scaling higher than 100% is not allowed. This problem appears only when the CA Spool Java Transformers are used. You can see similar text in the report file: Warning.OutOfPrintableArea(PclGenerator).Page 1 has 2 element(s) outside of the printable area (0 backgrounds, 1 barcodes, 1 forms, Info.PageScaled(PclGenerator).Page 1 was scaled by 102%. This problem is not affecting the resulted output. The impact is low. PRODUCT AFFECTED: CSPOOL 1737 AFP TO PCL - TEXT ON THE BACK SIDE IS OVERLAPPED When the CA Spool AFP to PCL Transformer option is used to transform an AFP file and printed on the duplex printer, text on every back side of the output sheet is overlapped on the right side if TuningOption="Auto" parameter is specified. This problem appears only when the CA Spool Java Transformers are used. Part of the text on the right side of the document is overlapped by another text. The document cannot be printed correctly. Use the CA Spool AFP to PDF Transformer option, if possible. PRODUCT AFFECTED: CSPOOL 1738 A2PC: NO WARNING MESSAGE WHEN CHANNEL NOT DEFINED IN PAGEDEF If skip to channel xx is specified in the input data (where xx represents a numeric value in range of 1-12), and the appropriate channel is not defined in the active page definition, line descriptor's line spacing is applied to the output document. However, no warning message indicates

6 CA Spool Java Transformers CA RS PTF RO54588 this behavior in the report log. This problem appears only when the CA Spool Java Transformers are used. Line descriptor's line spacing is applied to the output document, however no warning message is indicating this behavior in the report log. The document cannot be printed correctly. No warning messages is indicating error in the report log which icreases time needed to find out the cause of the problem. Don't specify skip to channel xx in the input data if the appropriate channel is not defined in the active page definition. CSPOOL 1740 CUMULATIVE CHANGES TO JAVA TRANSFORMER INTERFACE Several issues were reported for CA Spool's Java transformer interface. The transform interface vendor has made cumulative maintenance available for CA Spool's Java transformer interface. The build level of the transformer can be verified by looking at the.rpt file. The following statement is displayed at the top of the.rpt file: Version: , (BuildDate ) CSPOOL 1689 METACODE TO PDF - FILE IS IMPROPERLY TRANSFORMED When the PCC parameter is used to define the offset of the carriage control column within the data it is ignored. This problem appears only when the Spool Metacode to PDF Java Transformer option is used. The PDF output file is not correctly formatted. End users receive transformed PDF files that are incorrect. PRODUCT(S) AFFECTED: CSPOOL 1749 Copyright (C) 2013 CA. All rights reserved. R00010-E0C117-SP1 DESC(ORIENTATION SPECIFIED IN MEDIUM MAP IS NOT USED). ++VER (Z038) FMID (CE0CB70) PRE ( RO42958 RO47236 RO49626 RO50093 RO50480 RO51514 ) SUP ( TR54588 ) ++HOLD (RO54588) SYSTEM FMID(CE0CB70) REASON (DOC ) DATE (13046) COMMENT ( Product: CA Spool Release: 11.7 Publication: CA Spool Java Transformers Administration Guide See PRODUCT DOCUMENTATION CHANGE (PDC) RI54530 and RI54531 for documentation updates.

7 CA Spool Java Transformers CA RS PTF RO54588 ). ++HOLD (RO54588) SYSTEM FMID(CE0CB70) REASON (ACTION ) DATE (13046) COMMENT ( Product: CA Spool Release: 11.7 Sequence: After APPLY. Purpose: Restore the new CA Spool Java Transformers engine build into the desired USS directory and enable its use by the CA Spool Java Transformers FSS task. Relevance: If you wish to update the CA Spool Java Transformers engine Knowledge required: 1. Customizing the CA Spool Java Transformers 2. SMP/E Access required: 1. CA Spool's target libraries. 2. USS directories where the CA Spool Java Transformers are deployed. Steps to perform: 1. If CAI.CBQ4JCL(BQ4JJTAX) does not exist, apply RO Tailor and submit CAI.CBQ4JCL(BQ4JJTAX) to restore the CA Spool Java Transformers engine into the desired USS directory. 3. Update CAIQENVA member in CAI.CBQ4PARM to use the latest Java Transformers engine build. ).

8 CA Spool Java Transformers CA RS PTF RO RO55293 RO55293 M.C.S. ENTRIES = ++PTF (RO55293) METACODE TO PDF - JAVA TRANSFORMER HANGS AND NEVER ENDS A Dynamic Job Descriptor Entry 'DJDE' RTEXT results in a loop in the CA Spool Java Transformers when transforming Xerox Metacode. The loop can be seen in the Java Transformer FSS task. This problem appears when the CA Spool AFP to PDF Java Transformer option of the version or above is used. FSS task hangs and the transformation never ends. User is not able to transform and print the document. If possible, do not use the DJDE RTEXT or use a previous version of PRODUCT(S) AFFECTED: CSPOOL 1750 Copyright (C) 2013 CA. All rights reserved. R00011-E0C117-SP1 DESC(METACODE TO PDF - JAVA TRANSFORMER HANGS AND NEVER ENDS). ++VER (Z038) FMID (CE0CB70) PRE ( RO42958 RO47236 RO49626 RO50093 RO50480 RO51514 RO54588 ) SUP ( TR55293 ) ++HOLD (RO55293) SYSTEM FMID(CE0CB70) REASON (ACTION ) DATE (13063) COMMENT ( Product: CA Spool Release: 11.7 Sequence: After APPLY. Purpose: Restore the new CA Spool Java Transformers engine build into the desired USS directory and enable its use by the CA Spool Java Transformers FSS task. Relevance: If you wish to update the CA Spool Java Transformers engine Knowledge required: 1. Customizing the CA Spool Java Transformers 2. SMP/E Access required: 1. CA Spool's target libraries. 2. USS directories where the CA Spool Java Transformers are deployed. Steps to perform: 1. If CAI.CBQ4JCL(BQ4JJTAX) does not exist, apply RO Tailor and submit CAI.CBQ4JCL(BQ4JJTAX) to restore the CA Spool Java Transformers engine into the desired USS directory. 3. Update CAIQENVA member in CAI.CBQ4PARM to use the latest Java Transformers engine build. ).