CA XCOM Data Transport for z/os CA RS 1404 Service List

Transcription

1 CA XCOM Data Transport for z/os CA RS 1404 Service List Description Hiper 11.6 RO63247 BPX.DAEMON SECURITY ERROR WITH TYPE=EXECUTE TRANSFER RO65449 BATCH - XCOMJOB REQUIRES APF AUTHORIZATION WHEN NOT NEEDED RO65783 ISPF - INCORRECT CPU TIME DISPLAYED FOR ACTIVE TRANSFERS RO66753 ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF RO66792 INVALID ZIIP STATISTICS WITH HIGH CPU USAGE TRANSFERS RO66858 CHANGE DIAGNOSTIC MESSAGE NUMBERS IN XCOM CODE RO67186 ALLOW MULTIPLE XCOM RELEASES IN A PLEXQ GROUP RO67530 MAXMOUNTWAIT PARAMETER IS IGNORED USING TYPE=CONFIG MEMBER RO67792 XCOMJOB - TYPE=EXECUTE HANGS AFTER VTAM TIMEOUT RO68145 ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF The CA RS 1404 service count for this release is 10

2 CA XCOM Data Transport for z/os CA RS 1404 Service List Description Hiper 11.5 RO66780 ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF RO66857 CHANGE DIAGNOSTIC MESSAGE NUMBERS IN XCOM CODE RO66975 VOL PARAMETER NOT HONORED, PDS CREATED ON WRONG VOLUME RO68000 XCOMJOB - TYPE=EXECUTE HANGS AFTER VTAM TIMEOUT RO68143 ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF The CA RS 1404 service count for this release is 5

3 CA XCOM Data Transport for z/os 3 CA RS 1404 Service List for CBXGB50 FMID Service Description Hiper CBXGB50 RO66780 ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF RO66857 CHANGE DIAGNOSTIC MESSAGE NUMBERS IN XCOM CODE RO66975 VOL PARAMETER NOT HONORED, PDS CREATED ON WRONG VOLUME RO68000 XCOMJOB - TYPE=EXECUTE HANGS AFTER VTAM TIMEOUT RO68143 ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF The CA RS 1404 service count for this FMID is 5

4 CA XCOM Data Transport for z/os 4 CA RS 1404 Service List for CBXGB60 FMID Service Description Hiper CBXGB60 RO63247 BPX.DAEMON SECURITY ERROR WITH TYPE=EXECUTE TRANSFER RO65449 BATCH - XCOMJOB REQUIRES APF AUTHORIZATION WHEN NOT NEEDED RO65783 ISPF - INCORRECT CPU TIME DISPLAYED FOR ACTIVE TRANSFERS RO66753 ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF RO66792 INVALID ZIIP STATISTICS WITH HIGH CPU USAGE TRANSFERS RO66858 CHANGE DIAGNOSTIC MESSAGE NUMBERS IN XCOM CODE RO67186 ALLOW MULTIPLE XCOM RELEASES IN A PLEXQ GROUP RO67530 MAXMOUNTWAIT PARAMETER IS IGNORED USING TYPE=CONFIG MEMBER RO67792 XCOMJOB - TYPE=EXECUTE HANGS AFTER VTAM TIMEOUT RO68145 ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF The CA RS 1404 service count for this FMID is 10

5 CA XCOM Data Transport for z/os CA RS PTF RO RO63247 RO63247 M.C.S. ENTRIES = ++PTF (RO63247) BPX.DAEMON SECURITY ERROR WITH TYPE=EXECUTE TRANSFER When submitting an XCOMJOB TYPE=EXECUTE file transfer and where SECURITY=SAF is set, the transfer will complete successfully but a security error may be seen in the JESMSGLG and JESYSMSG files. After the transfer completes the following error may be seen in the JESMSGLG and JESYSMSG for the corresponding security packages: ACF2: ACFFF601 ENVIRONMENT IS CONTROLLED - MARK UNCONTROLLED REQUEST REJECTED RACF: BPXP014I ENVIRONMENT MUST BE CONTROLLED FOR DAEMON (BPX.DAEMON) PROCESSING. TSS: TSS7250W 151 J=XCOMJOB A=USERID TYPE=IBMFAC RESOURCE=BPX.DAEMON TSS7257W Unauthorized Access Level for IBMFAC <BPX.DAEMON> A security error is encountered for successful XCOM transfers. Ignore the error or if possible provide the USERID access to the IBMFAC <BPX.DAEMON>. PRODUCTS AFFECTED: XCMVS 1155 Copyright (C) 2013 CA. All rights reserved. R00108-BXG116-SP1 DESC(BPX.DAEMON SECURITY ERROR WITH TYPE=EXECUTE TRANSFER). PRE ( RO50351 RO55407 RO56967 RO58944 ) SUP ( TR63247 )

6 CA XCOM Data Transport for z/os CA RS PTF RO RO65449 RO65449 M.C.S. ENTRIES = ++PTF (RO65449) BATCH - XCOMJOB REQUIRES APF AUTHORIZATION WHEN NOT NEEDED XCOMJOB requires APF authorization and results in the XCOMJOB failing even for processes that do not need it such as when SCHEDULING transfers or running INQUIRIES on transfers. The following messages are displayed on the XCOMLOG. XCOMM0049E XCOM IS NOT APF AUTHORIZED - JOB TERMINATING XCOMM0071I XCOMJOB NOW TERMINATING RC=32 The batch XCOMJOB is terminated Make sure all the libraries in the STEPLIB are APF authorized. XCMVS 1168 Copyright (C) 2014 CA. All rights reserved. R00116-BXG116-SP1 DESC(BATCH - XCOMJOB REQUIRES APF AUTHORIZATION WHEN NOT NEEDED). PRE ( RO50360 RO50361 RO50683 RO51241 RO54373 RO58671 RO59725 RO60150 RO63853 ) SUP ( RO51950 RO52697 RO53137 RO56176 RO57670 RO57769 RO58310 RO59456 RO63279 TR51950 TR52697 TR53137 TR56176 TR57670 TR57769 TR58310 TR59456 TR63279 TR65449 TR65597 )

7 CA XCOM Data Transport for z/os CA RS PTF RO RO65783 RO65783 M.C.S. ENTRIES = ++PTF (RO65783) ISPF - INCORRECT CPU TIME DISPLAYED FOR ACTIVE TRANSFERS When an active transfer is viewed from the ISPF Operator Control screen, the CPU time that is being displayed will be incorrect. While the transfer is active, the incorrect CPU time being displayed will be similar to the following: CPU: Time: 8,589,999,731 (micr) TCB: 36,028,809,359,191,664 The CPU time being displayed for active transfers will cause confusion. None. XCMVS 1173 Copyright (C) 2013 CA. All rights reserved. R00120-BXG116-SP1 DESC(ISPF - INCORRECT CPU TIME DISPLAYED FOR ACTIVE TRANSFERS). PRE ( RO64611 ) SUP ( TR65783 )

8 CA XCOM Data Transport for z/os CA RS PTF RO RO66753 RO66753 M.C.S. ENTRIES = ++PTF (RO66753) ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF When SECURITY=SAF and the userid or password is invalid from a remotely initiated transfer, the ISPF display for the failed transfer shows the request number as Other details for this transfer are missing as well. The following screen is displayed on the ISPF panel Req Trans Prty Where Start S Num Type Xfer-Id SL EX User Id Started Date Time Stat RECV REMOTE LOGC History System Name: XCOM231 History System ID: CA31 Location: Remote System: XCOMRO00 REMT FILE: *** UNKNOWN *** DEST: WRITER: CLASS: FORM: The ISPF display shows incomplete information about the transfer that failed. None. CA XCOM Data Transport r11.5 XCMVS 1178 Copyright (C) 2014 CA. All rights reserved. R00122-BXG116-SP1 DESC(ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF). PRE ( RO50350 RO51058 RO51242 RO51355 RO55608 RO56967 RO61360 RO62246 ) SUP ( RO52044 RO52350 RO60307 RO61419 TR50347 TR52044 TR52350 TR60307 TR61419 TR66753 )

9 CA XCOM Data Transport for z/os CA RS PTF RO RO66792 RO66792 M.C.S. ENTRIES = ++PTF (RO66792) INVALID ZIIP STATISTICS WITH HIGH CPU USAGE TRANSFERS A ziip eligible job that has a high CPU usage will result in the ziip statistics messages displaying incorrect values in XCOMLOG. The ziip time usage information in XCOMLOG is incorrect. For example: This is the correct display of the message: XCOMM0897I TOTAL ELIGIBLE ziip TIME = MICROSECONDS XCOMM0897I TOTAL ACTUAL ziip TIME = MICROSECONDS This is the incorrect display of the message: XCOMM0897I TOTAL ELIGIBLE ziip TIME = XCOMM0897I TOTAL ACTUAL ziip TIME = Clients running jobs with high CPU usage will not get the correct ziip processing time returned. None. CA XCOM Data Transport for MVS r11.6 XCMVS 1157 Copyright (C) 2014 CA. All rights reserved. R00124-BXG116-SP1 DESC(INVALID ZIIP STATISTICS WITH HIGH CPU USAGE TRANSFERS). PRE ( RO50360 RO50361 RO50683 RO54373 RO58671 RO60150 RO63853 RO65449 ) SUP ( RO52697 RO53137 RO56176 TR52697 TR53137 TR56176 TR65597 TR66792 )

10 CA XCOM Data Transport for z/os CA RS PTF RO RO66858 RO66858 M.C.S. ENTRIES = ++PTF (RO66858) CHANGE DIAGNOSTIC MESSAGE NUMBERS IN XCOM CODE Diagnostic messages were left in the XCOM code and as a result are overlapping the output of the XCOMM0017I and XCOMM0588I messages. The XCOMM0017I and XCOMM0588I messages will not display the correct message text as documented in the XCOM Message Guide. The actual message text that is being displayed will confuse users. None. CA XCOM Data Transport r11.5 XCMVS 1164 Copyright (C) 2014 CA. All rights reserved. R00125-BXG116-SP1 DESC(CHANGE DIAGNOSTIC MESSAGE NUMBERS IN XCOM CODE). PRE ( RO50354 RO50360 RO50483 RO50683 RO50746 RO51058 RO51213 RO51242 RO51243 RO60150 RO61107 RO61884 RO61907 ) SUP ( RO51354 RO56214 RO58447 TR51354 TR56214 TR58447 TR66858 )

11 CA XCOM Data Transport for z/os CA RS PTF RO RO67186 RO67186 M.C.S. ENTRIES = ++PTF (RO67186) ALLOW MULTIPLE XCOM RELEASES IN A PLEXQ GROUP All CA XCOM Data Transport Servers and Jobs connecting to a PLEXQ Group must all be at the same release level. This makes migration to newer releases of CA XCOM Data Transport more difficult. When a CA XCOM Data Transport Server or Job of a different release level attempts to connect to a PLEXQ Group, the connection is terminated and a message is issued to the log: XCOMM1106E THIS XCOM XXXXXX IS NOT RELEASE COMPATIBLE WITH PLEXQ GROUP xxxxx Unable to upgrade CA XCOM Data Transport Servers or Jobs that utilize a PLEXQ Group until all Servers/Jobs are upgraded. None. CA XCOM Data Transport for z/os r11.6 XCMVS 1181 Copyright (C) 2014 CA. All rights reserved. R00126-BXG116-SP1 DESC(ALLOW MULTIPLE XCOM RELEASES IN A PLEXQ GROUP). PRE ( RO50354 RO50360 RO50361 RO50483 RO50484 RO50683 RO50746 RO51058 RO51213 RO51242 RO51243 RO60150 RO61107 RO61884 RO61907 RO66858 ) SUP ( RO58447 RO64318 TR58447 TR64318 TR67186 )

12 CA XCOM Data Transport for z/os CA RS PTF RO RO67530 RO67530 M.C.S. ENTRIES = ++PTF (RO67530) MAXMOUNTWAIT PARAMETER IS IGNORED USING TYPE=CONFIG MEMBER The MAXMOUNTWAIT parameter is honored when loaded from a default table but is ignored when loaded from a TYPE=CONFIG member. The result is that the transfer, which is waiting for the mount, will time out after the default value of 10 minutes no matter what value has been specified in the TYPE=CONFIG member. The following message is displayed on the XCOMLOG XCOMM0853E XXXXXX req# ALLOCATION FAILED, MAXMOUNTWAIT EXCEEDED, DSN= Where XXXXXX is the LU or IP ADDRESS of the partner DSN= is the name of the file to be mounted The transfer is terminated after waiting 10 minutes for the mount even if the user specifies a MAXMOUNTWAIT time greater than 10 minutes in the TYPE=CONFIG member. Use the XCOMDFLT table from a load library instead of the TYPE=CONFIG member. XCMVS 1187 Copyright (C) 2014 CA. All rights reserved. R00127-BXG116-SP1 DESC(MAXMOUNTWAIT PARAMETER IS IGNORED USING TYPE=CONFIG MEMBER). PRE ( RO56967 RO58083 RO58944 ) SUP ( RO56357 RO60525 RO62275 RO64895 TR56357 TR60525 TR62275 TR64895 TR67530 )

13 CA XCOM Data Transport for z/os CA RS PTF RO RO67792 RO67792 M.C.S. ENTRIES = ++PTF (RO67792) XCOMJOB - TYPE=EXECUTE HANGS AFTER VTAM TIMEOUT A TYPE=EXECUTE SNA transfer will not terminate after a VTAM Timeout is detected by XCOM. XCOMM0186E ÝXCOM1 RC 0C FDBK2 0B SENSE SEND XCOMM0714E VTAM COMMAND TIMEOUT, ABORTING SESSION WITH SLU=ÝXCOM2 XCOMM0096E RECEIVE REQUEST ENDED DUE TO VTAM ERROR XCOMM0186E ÝXCOM2 RC 00 FDBK2 00 SENSE RECEIVE After these messages occur, the XCOM job does not terminate and will stay active until it is cancelled manually. Jobs that encounter a VTAM Timeout have to be terminated manually. None PRODUCTS AFFECTED: CA XCOM Data Transport r11.5 XCMVS 1186 Copyright (C) 2014 CA. All rights reserved. R00129-BXG116-SP1 DESC(XCOMJOB - TYPE=EXECUTE HANGS AFTER VTAM TIMEOUT). SUP ( RO55850 RO60889 TR55850 TR60889 TR67792 )

14 CA XCOM Data Transport for z/os CA RS PTF RO RO68145 RO68145 M.C.S. ENTRIES = ++PTF (RO68145) ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF When SECURITY=SAF and the userid or password is invalid from a remotely initiated transfer, the ISPF display for the failed transfer shows the request number as Other details for this transfer are missing as well. The following screen is displayed on the ISPF panel Req Trans Prty Where Start S Num Type Xfer-Id SL EX User Id Started Date Time Stat SEND REMOTE LOGC History System Name: XCOM231 History System ID: CA31 Location: Remote System: XCOMRO00 LOCL FILE: DEST: WRITER: CLASS: FORM: The ISPF display shows incomplete information about the transfer that failed. None. CA XCOM Data Transport r11.5 XCMVS 1192 Copyright (C) 2014 CA. All rights reserved. R00132-BXG116-SP1 DESC(ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF). PRE ( RO51056 RO51058 RO51242 RO51355 RO56967 RO61360 RO62246 ) SUP ( TR68145 )

15 CA XCOM Data Transport for z/os CA RS PTF RO RO66780 RO66780 M.C.S. ENTRIES = ++PTF (RO66780) ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF When SECURITY=SAF and the userid or password is invalid from a remotely initiated transfer, the ISPF display for the failed transfer shows the request number as Other details for this transfer are missing as well. The following screen is displayed on the ISPF panel Req Trans Prty Where Start S Num Type Xfer-Id SL EX User Id Started Date Time Stat RECV REMOTE LOGC History System Name: XCOM231 History System ID: CA31 Location: Remote System: XCOMRO00 REMT FILE: *** UNKNOWN *** DEST: WRITER: CLASS: FORM: The ISPF display shows incomplete information about the transfer that failed. None. CA XCOM Data Transport r11.5 XCMVS 1178 Copyright (C) 2014 CA. All rights reserved. R00190-BXG115-SP1 DESC(ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF). FMID (CBXGB50) PRE ( RO21331 RO21637 RO22200 RO22573 RO24522 RO24524 RO24536 RO26520 RO26803 RO33460 RO37606 RO41249 RO42212 RO49052 RO50921 RO52175 RO54847 RO60304 RO62189 ) SUP ( TR66780 )

16 CA XCOM Data Transport for z/os CA RS PTF RO RO66857 RO66857 M.C.S. ENTRIES = ++PTF (RO66857) CHANGE DIAGNOSTIC MESSAGE NUMBERS IN XCOM CODE Diagnostic messages were left in the XCOM code and as a result are overlapping the output of the XCOMM0017I and XCOMM0588I messages. The XCOMM0017I and XCOMM0588I messages will not display the correct message text as documented in the XCOM Message Guide. The actual message text that is being displayed will confuse users. None. CA XCOM Data Transport r11.5 XCMVS 1164 Copyright (C) 2014 CA. All rights reserved. R00191-BXG115-SP1 DESC(CHANGE DIAGNOSTIC MESSAGE NUMBERS IN XCOM CODE). FMID (CBXGB50) PRE ( RO22200 RO23794 RO29298 RO32131 RO33765 RO35666 RO36019 RO37606 RO41249 RO42212 RO42991 RO49744 RO55531 RO61023 RO61817 ) SUP ( RO42756 TR42756 TR66857 )

17 CA XCOM Data Transport for z/os CA RS PTF RO RO66975 RO66975 M.C.S. ENTRIES = ++PTF (RO66975) VOL PARAMETER NOT HONORED, PDS CREATED ON WRONG VOLUME When a PDS file is transferred that was created with space allocated in blocks and the transfer specifies the parameter VOL=xxxxxx then the output file gets created on a work volume instead of on the volume specified by the VOL parameter. The transferred PDS file is created on a work volume instead of the specified volume. The target file gets created on the wrong volume. None CA XCOM Data Transport r11.5 XCMVS 1123 Copyright (C) 2014 CA. All rights reserved. R00192-BXG115-SP1 DESC(VOL PARAMETER NOT HONORED, PDS CREATED ON WRONG VOLUME). FMID (CBXGB50) PRE ( RO21687 RO22200 RO23794 RO30681 RO42428 RO47775 RO50875 RO58414 RO63638 ) SUP ( RO46944 TR46944 TR66975 )

18 CA XCOM Data Transport for z/os CA RS PTF RO RO68000 RO68000 M.C.S. ENTRIES = ++PTF (RO68000) XCOMJOB - TYPE=EXECUTE HANGS AFTER VTAM TIMEOUT A TYPE=EXECUTE SNA transfer will not terminate after a VTAM Timeout is detected by XCOM. XCOMM0186E ÝXCOM1 RC 0C FDBK2 0B SENSE SEND XCOMM0714E VTAM COMMAND TIMEOUT, ABORTING SESSION WITH SLU=ÝXCOM2 XCOMM0096E RECEIVE REQUEST ENDED DUE TO VTAM ERROR XCOMM0186E ÝXCOM2 RC 00 FDBK2 00 SENSE RECEIVE After these messages occur, the XCOM job does not terminate and will stay active until it is cancelled manually. Jobs that encounter a VTAM Timeout have to be terminated manually. None PRODUCTS AFFECTED: CA XCOM Data Transport r11.5 XCMVS 1186 Copyright (C) 2014 CA. All rights reserved. R00195-BXG115-SP1 DESC(XCOMJOB - TYPE=EXECUTE HANGS AFTER VTAM TIMEOUT). FMID (CBXGB50) PRE ( RO23447 RO24398 RO26803 RO27048 RO29298 RO37606 RO41249 RO48041 ) SUP ( AR61115 RO55673 RO61115 RO67217 TR55673 TR61115 TR67217 TR68000 )

19 CA XCOM Data Transport for z/os CA RS PTF RO RO68143 RO68143 M.C.S. ENTRIES = ++PTF (RO68143) ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF When SECURITY=SAF and the userid or password is invalid from a remotely initiated transfer, the ISPF display for the failed transfer shows the request number as Other details for this transfer are missing as well. The following screen is displayed on the ISPF panel Req Trans Prty Where Start S Num Type Xfer-Id SL EX User Id Started Date Time Stat SEND REMOTE LOGC History System Name: XCOM231 History System ID: CA31 Location: Remote System: XCOMRO00 LOCL FILE: DEST: WRITER: CLASS: FORM: The ISPF display shows incomplete information about the transfer that failed. None. CA XCOM Data Transport r11.5 XCMVS 1192 Copyright (C) 2014 CA. All rights reserved. R00196-BXG115-SP1 DESC(ISPF DISPLAY WRONG FOR FAILED TRANSFERS WHEN SECURITY=SAF). FMID (CBXGB50) PRE ( RO21637 RO22200 RO24522 RO24524 RO24536 RO26520 RO26803 RO27468 RO36673 RO37606 RO41249 RO42622 RO46987 RO50921 RO62189 ) SUP ( TR68143 )