Aid-Call. Are Pager/s switched on? Insert Battery. Wait 3-5secs then Press & Hold the GREEN button to switch on pager

Size: px

Start display at page:

Download "Aid-Call. Are Pager/s switched on? Insert Battery. Wait 3-5secs then Press & Hold the GREEN button to switch on pager"

Blake Knight
5 years ago
Views:

1 Touchsafe Pro Nurse Call J24/J25 Pager NOT paging/vibrating etc on Calls Are Pager/s switched on? Insert Battery Wait 3-5secs then Press & Hold the GREEN button to switch on pager Aid-Call will display on pager for a second then disappear to leaving Date & Time Aid-Call 16 Sept :00 PM WED

2 Has Pager been set to SILENT alert? Insert Battery Wait 3-5secs then Press & Hold the GREEN button to switch on pager Aid-Call will display on pager for a second then disappear to leaving Date & Time Aid-Call 16 Sept :00 PM WED

3 When Date & Time is being displayed, press the RIGHT > direction button until pager displays SET ALERT SET ALERT Press the GREEN button to select SET ALERT menu The 1 st Alert type to be displayed will be TONE TONE Keep pressing the RIGHT > direction button to scroll through the following alert types; VIBRATE TONE & VIB SILENT Keep pressing the RIGHT > direction button until the desired alert type is displayed then press the GREEN button to confirm

4 Do Pager batteries have a good charge? Possibly change battery Is battery inserted/oriented into Pager correctly? Negaitive - Positive + Are pagers out of range? Locate Pager/s closer to Paging Transmitter Range

5 Are paging codes correct? Check Paging Codes on any working Pagers Firstly & make a note of these codes Check that these codes are also in the non working Pager These can be checked by; Inserting Battery whilst holding the GREEN button Pager will display MNL PROGRAMMING (MNL = Manual) Press the GREEN button once Pager will Display ( ) at this point & the 1 st digit 0 will flash you must then enter code to enter programming. This code is Press the GREEN button to tab through each digit & use direction keys to change the digit. Once the desired Code has been set, press the GREEN button until you reach the 1 st Menu Pager ID Codes If you wish to keep or just check the Pager ID settings as they are, press the RIGHT > direction button to scroll through to the Pager I.D s until you reach the next menu. - Baud Rate Setting. Are the Paging Codes the same as Paging Codes on working Pagers onsite? The BAUD Rate should always be set to 512 and should not be changed. To move onto the next menu Freq, simply press the GREEN button

The Frequency should always match the ASTRA Pager Transmit frequency and is

If this requires changing (which is seldom necessary), press the GREEN

accept the programming. Are paging codes actually programmed in Main Panel?

6 The Frequency should always match the ASTRA Pager Transmit frequency and is usually set to MHz. If this requires changing (which is seldom necessary), press the GREEN button until the desired digit is flashing and use the RIGHT > direction key to change digit. There is no other option but YES, at this point press the GREEN button to accept the programming. Are paging codes actually programmed in Main Panel? To check, Press Log On Enter Log On number to allow your level of access Engineer = 2371 Manager = 9876 Matron = 1234 *NOTE: MATRON or MANAGER CANNOT ACCESS THIS PROGRAMMING LEVEL* & press Log On

7 Press Paging Set Up button Make sure ASTRA is selected & saved in Paging Protocol Press Common Pagers button

8 Check Paging Codes (displayed in Pagers) are the same as codes programmed in Common Pagers programming Group Day codes for each call level. Check Paging Codes (displayed in Pagers) are the same as codes programmed in Common Pagers programming Group Night 1 codes for each call level.

Remember to SAVE any changed setting & then press CLOSE Once Common Pager

9 Check Paging Codes (displayed in Pagers) are the same as codes programmed in Common Pagers programming Group Night 2 codes for each call level. Remember to SAVE any changed setting & then press CLOSE Once Common Pager settings have been checked, then check Zoned Pager programming on Panel. Press Zoned Pagers button

10 Check Paging Codes (displayed in Pagers) are the same as codes programmed in Zoned Pagers programming Zone Day codes for each call level. Check Paging Codes (displayed in Pagers) are the same as codes programmed in Zoned Pagers programming Zone Night 1 codes for each call level. Check Paging Codes (displayed in Pagers) are the same as codes programmed in Zoned Pagers programming Zone Night 2 codes for each call level.

11 Is Astra or Maxpage Transmitter cabled correctly to Panel? Is Astra or Maxpage Transmitter cable to Panel less than 20m in length? Do Astra or Maxpage Transmitter have power? Power LED s Do Astra or Maxpage Transmitter, transmitting? Check Transmitter LED s are illuminating? Transmit LED s

Programming and user guide

Programming and user guide CareAssist 68100/01 D6707281B Introduction CareAssist is designed to support local carers to deliver high quality, non-intrusive care. It is extremely easy to use, portable device