Appendix 2 - Code List: IR / RS232 / DDC Data
|
|
- Alaina Lewis
- 5 years ago
- Views:
Transcription
1 Appendix 2 - Code List: IR / RS232 / DDC Data Remote Control Code: 1. IR Code (A) IR setting value Frequency: 38.5kHz Protocal: NEC format (B) IR command code CUSTOMER CODE DATA CODE FUNCTION POWER FREEZE SOURCE BLANK AUTO B UP C DOWN D LEFT E RIGHT F MENU MODE CONTRAST ASPECT MUTE ENTER BRIGHTNESS DIGITAL ZOOM DIGITAL ZOOM E CAPTURE TIMER ON TIMER SETUP F Power On E Power Off Vol Vol TEST PATTERN 112
2 2. RS-232 Command Code Type Operation ASCII Note Write Power On <CR>*pow=on#<CR> Standby Write Power off <CR>*pow=off#<CR> power on Read Power Status <CR>*pow=?#<CR> Standby, power on Write Power On <CR>*pow=on#<CR> 0D 2A 70 6F 77 3D 6F 6E 23 0D >.*pow=on#...*pow=on#... 3E 0 2A 70 6F 77 3D 6F 6E 23 D D A 0 2A 50 4F 57 3D 4F 4E 23 D A 0 If system already turn on and send command again >.*pow=on#...*pow=on#... 3E 0 2A 70 6F 77 3D 6F 6E 23 D D A 0 2A 50 4F 57 3D 4F 4E 23 D A 0 Write Power Off <CR>*pow=off#<CR> 0D 2A 70 6F 77 3D 6F D >.*pow=off#...*pow=off#... 3E 0 2A 70 6F 77 3D 6F D D A 0 2A 50 4F 57 3D 4F D A 0 If system already turn off and send command again >.*pow=off#...*pow=off#... 3E 0 2A 70 6F 77 3D 6F D D A 0 2A 50 4F 57 3D 4F D A 0 Read Power Status <CR>*pow=?#<CR> 0D 2A 70 6F 77 3D 3F 23 0D >.*pow=?#...*pow=on#... 3E 0 2A 70 6F 77 3D 3F 23 D D A 0 2A 50 4F 57 3D 4F 4E 23 D A 0 Note : This is in power on status. >.*pow=?#...*pow=off#... 3E 0 2A 70 6F 77 3D 3F 23 D D A 0 2A 50 4F 57 3D 4F D A 0 Note : This is in power off status. Source Selection(depend on models) Type Operation ASCII Note Write VGA/YPbPr <CR>*sour=RGB#<CR> power on Write VGA/YPbPr-2 <CR>*sour=RGB2#<CR> power on Write YPbPr <CR>*sour=YPbr#<CR> power on Write DVI-A <CR>*sour=dviA#<CR> power on Write DVI-D <CR>*sour=dvid#<CR> power on Write HDMI <CR>*sour=hdmi#<CR> power on Write HDMI-2 <CR>*sour=hdmi2#<CR> power on Write Network <CR>*sour=net#<CR> power on Write Composite <CR>*sour=vid#<CR> power on Write SVIDEO <CR>*sour=svid#<CR> power on Read Current source <CR>*sour=?#<CR> power on Write VGA/YPbPr <CR>*sour=RGB#<CR> 0D 2A 73 6F D D 113
3 >.*sour=rgb#...*sour=rgb#... 3E 00 2A 73 6F D D 0D 0A 00 2A 53 4F D D 0A 00 Write VGA/YPbPr-2 <CR>*sour=RGB2<CR> 0D 2A 73 6F D D >.*sour=rgb2#...*unsupported item #... 3E 00 2A 73 6F D D D A 0 2A 55 6E F D 23 0D 0A 00 Write YPbPr <CR>*sour=YPbr#<CR> 0D 2A 73 6F D D >.*sour=ypbr#...* SOUR=YPBR#... 3E 00 2A 73 6F D D 0D 0A 00 2A 53 4F D D 0A 00 Write DVI-A <CR>*sour=dviA#<CR> 0D 2A 73 6F D D >.*sour=dvia#...*sour=dvia#... 3E 00 2A 73 6F D D 0D 0A 00 2A 53 4F D D 0A 00 Write DVI-D <CR>*sour=dvid#<CR> 0D 2A 73 6F D D >.*sour=dvid#...*sour=dvid#... 3E 00 2A 73 6F D D 0D 0A 00 2A 53 4F D D 0A 00 Write HDMI <CR>*sour=hdmi#<CR> 0D 2A 73 6F D D D >.*sour=hdmi#...*sour=hdmi#... 3E 00 2A 73 6F D D D 0D 0A 00 2A 53 4F D D D 0A 00 Write HDMI-2 <CR>*sour=hdmi2#<CR> 0D 2A 73 6F D D D >.*sour=hdmi2#...*unsupported item#... 3E 00 2A 73 6F D D D D A 0 2A 55 6E F D 23 0D 0A 00 Write Network <CR>*sour=net#<CR> 0D 2A 73 6F D 6E D >.*sour=net#...*unsupported item#... 3E 00 2A 73 6F D 6E D D A 0 2A 55 6E F D 23 0D 0A 00 Write Composite <CR>*sour=vid#<CR> 0D 2A 73 6F D D >.*sour=vid#...*sour=vid#... 3E 00 2A 73 6F D D 0D 0A 00 2A 53 4F 114
4 D D 0A 00 Write SVIDEO <CR>*sour=svid#<CR> 0D 2A 73 6F D D >.*sour=svid#...*sour=svid#... 3E 00 2A 73 6F D D 0D 0A 00 2A 53 4F D D 0A 00 Read Current source <CR>*sour=?#<CR> 0D 2A 73 6F D 3F 23 0D >.*sour=?#...*sour=dvid#... 3E 00 2A 73 6F D 3F 23 0D 0D 0A 00 2A 53 4F D D 0A 00 Note : This is an example for inquiry command with current source is DVI-D Audio Type Operation ASCII Note Write Mute On <CR>*mute=on#<CR> power on Write Mute Off <CR>*mute=off#<CR> power on Read Mute Status <CR>*mute=?#<CR> power on Write Volume + <CR>*vol=+#<CR> power on Write Volume - <CR>*vol=-#<CR> power on Read Volume <CR>*vol=?#<CR> power on Write Mute On <CR>*mute=on#<CR> 0D 2A 6D D 6F 6E 23 0D >.*mute=on#...*mute=on#... 3E 00 2A 6D D 6F 6E 23 0D 0D 0A 00 2A 4D D 4F 4E 23 0D 0A 00 Write Mute Off <CR>*mute=off#<CR> 0D 2A 6D D 6F D >.*mute=off#...*mute=off#... 3E 00 2A 6D D 6F D 0D 0A 00 2A 4D D 4F D 0A 00 Read Mute Status <CR>*mute=?#<CR> 0D 2A 6D D 3F 23 0D >.*mute=?#...*mute=off#... 3E 00 2A 6D D 3F 23 0D 0D 0A 00 2A 4D D 4F D 0A 00 Note : This is an example for inquiry command with current mute is off. Write Volume + <CR>*vol=+#<CR> 0D 2A 76 6F 6C 3D 2B 23 0D >.*vol=+#...*vol=+#... 3E 00 2A 76 6F 6C 3D 2B 23 0D 0D 0A 00 2A 56 4F 4C 3D 2B 23 0D 0A
5 Write Volume - <CR>*vol=-#<CR> 0D 2A 76 6F 6C 3D 2D 23 0D >.*vol=-#...*vol=-#... 3E 00 2A 76 6F 6C 3D 2D 23 0D 0D 0A 00 2A 56 4F 4C 3D 2D 23 0D 0A 00 Read Volume <CR>*vol=?#<CR> 0D 2A 76 6F 6C 3D 3F 23 0D >.*vol=?#...*vol=5#... 3E 00 2A 76 6F 6C 3D 3F 23 0D 0D 0A 00 2A 56 4F 4C 3D D 0A 00 Note : This is an example for inquiry command with current volume is 5. Preset Mode Type Operation ASCII Note Write Dynamic <CR>*appmod=dynamic#<CR> Source Display Write Presentation <CR>*appmod=preset#<CR> Source Display Write srgb <CR>*appmod=srgb#<CR> Source Display Write Cinema <CR>*appmod=cine#<CR> Source Display Write Standard <CR>*appmod=std#<CR> Source Display Write User1 <CR>*appmod=user1#<CR> Source Display Write User2 <CR>*appmod=user2#<CR> Source Display Type Operation ASCII Note Read Picture Mode <CR>*appmod=?#<CR> Source Display Write Dynamic <CR>*appmod=dynamic#<CR> 0x0D 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x64 0x79 0x6E 0x61 0x6D 0x69 0x63 0x23 0x0D >.*appmod=dynamic#...*appmod=dynamic# 0x3E 0x00 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x64 0x79 0x6E 0x61 0x6D 0x69 0x63 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x41 0x50 0x50 0x4D 0x4F 0x44 0x3D 0x44 0x59 0x4E 0x41 0x4D 0x49 0x43 0x23 0x0D 0x0A 0x00 Write Presentation <CR>*appmod=preset#<CR> 0x0D 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x70 0x72 0x65 0x73 0x65 0x74 0x23 0x0D >.*appmod=preset#..*appmod=preset# 0x3E 0x00 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x70 0x72 0x65 0x73 0x65 0x74 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x41 0x50 0x50 0x4D 0x4F 0x44 0x3D 0x50 0x52 0x45 0x53 0x45 0x54 0x23 0x0D 0x0A 0x00 116
6 Write srgb <CR>*appmod=srgb#<CR> 0x0D 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x73 0x72 0x67 0x62 0x23 0x0D >.*appmod=srgb#...*appmod=srgb# 0x3E 0x00 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x73 0x72 0x67 0x62 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x41 0x50 0x50 0x4D 0x4F 0x44 0x3D 0x53 0x52 0x47 0x42 0x23 0x0D 0x0A 0x00 Write Cinema <CR>*appmod=cine#<CR> 0x0D 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x63 0x69 0x6E 0x65 0x23 0x0D >.*appmod=cine#...*appmod=cine# 0x3E 0x00 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x63 0x69 0x6E 0x65 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x41 0x50 0x50 0x4D 0x4F 0x44 0x3D 0x43 0x49 0x4E 0x45 0x23 0x0D 0x0A 0x00 Write Standard <CR>*appmod=std#<CR> 0x0D 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x73 0x74 0x64 0x23 0x0D >.*appmod=std#...*appmod=std# 0x3E 0x00 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x73 0x74 0x64 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x41 0x50 0x50 0x4D 0x4F 0x44 0x3D 0x53 0x54 0x44 0x23 0x0D 0x0A 0x00 Write User1 <CR>*appmod=user1#<CR> 0x0D 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x75 0x73 0x65 0x72 0x31 0x23 0x0D >.*appmod= user1#... *APPMOD=USER1# 0x3E 0x00 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x75 0x73 0x65 0x72 0x31 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x41 0x50 0x50 0x4D 0x4F 0x44 0x3D 0x55 0x53 0x45 0x52 0x31 0x23 0x0D 0x0A 0x00 Write User2 <CR>*appmod=user2#<CR> 0x0D 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x75 0x73 0x65 0x72 0x32 0x23 0x0D >.*appmod=user2#... *APPMOD=USER2# 0x3E 0x00 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x75 0x73 0x65 0x72 0x32 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x41 0x50 0x50 0x4D 0x4F 0x44 0x3D 0x55 0x53 0x45 0x52 0x32 0x23 0x0D 0x0A 0x00 Read Picture Mode <CR>*appmod=?#<CR> 0x0D 0x2A 0x61 0x70 0x70 0x6D 0x6F 117
7 0x64 0x3D 0x3F 0x23 0x0D >.*appmod=?#...*appmod=srgb# 0x3E 0x00 0x2A 0x61 0x70 0x70 0x6D 0x6F 0x64 0x3D 0x3F 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x41 0x50 0x50 0x4D 0x4F 0x44 0x3D 0x53 0x52 0x47 0x42 0x23 0x0D 0x0A 0x00 Note : This is an example for inquiry command with current mode is SRGB. Baud Rate Type Operation ASCII Note Write 2400 <CR>*baud=2400#<CR> power on Write 4800 <CR>*baud=4800#<CR> power on Write 9600 <CR>*baud=9600#<CR> power on Write <CR>*baud=14400#<CR> power on Write <CR>*baud=19200#<CR> power on Write <CR>*baud=38400#<CR> power on Write <CR>*baud=57600#<CR> power on Write <CR>*baud=115200#<CR> power on Type Operation ASCII Note Read Baud Rate <CR>*baud=?#<CR> power on Write 2400 <CR>*baud=2400#<CR> 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x32 0x34 0x30 0x30 0x23 0x0D >.*baud=2400#...*baud=2400# 0x3E 0x00 0x2A 0x62 0x61 0x75 0x64 0x3D 0x32 0x34 0x30 0x30 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x42 0x41 0x55 0x44 0x3D 0x32 0x34 0x30 0x30 0x23 0x0D 0x0A 0x00 Write 4800 <CR>*baud=4800#<CR> 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x34 0x38 0x30 0x30 0x23 0x0D >.*baud=4800#...*baud=4800# 0x3E 0x00 0x2A 0x62 0x61 0x75 0x64 0x3D 0x34 0x38 0x30 0x30 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x42 0x41 0x55 0x44 0x3D 0x34 0x38 0x30 0x30 0x23 0x0D 0x0A 0x00 Write 9600 <CR>*baud=9600#<CR> 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x39 0x36 0x30 0x30 0x23 0x0D >.*baud=9600#...*baud=9600# 0x3E 0x00 0x2A 0x62 0x61 0x75 0x64 0x3D 0x39 0x36 0x30 0x30 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x42 0x41 0x55 0x44 0x3D 0x39 0x36 0x30 0x30 0x23 0x0D 0x0A 0x00 Write <CR>*baud=14400#<CR> 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x31 0x34 0x34 0x30 0x30 0x23 0x0D >.*baud=14400#...*baud=14400# 0x3E 0x00 0x2A 0x62 0x61 0x75 0x64 0x3D 0x31 0x34 0x34 118
8 0x30 0x30 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x42 0x41 0x55 0x44 0x3D 0x31 0x34 0x34 0x30 0x30 0x23 0x0D 0x0A 0x00 Write <CR>*baud=19200#<CR> 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x31 0x39 0x32 0x30 0x30 0x23 0x0D >.*baud=19200#...*baud=19200# 0x3E 0x00 0x2A 0x62 0x61 0x75 0x64 0x3D 0x31 0x39 0x32 0x30 0x30 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x42 0x41 0x55 0x44 0x3D 0x31 0x39 0x32 0x30 0x30 0x23 0x0D 0x0A 0x00 Write <CR>*baud=38400#<CR> 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x33 0x38 0x34 0x30 0x30 0x23 0x0D >.*baud=38400#...*baud=38400# 0x3E 0x00 0x2A 0x62 0x61 0x75 0x64 0x3D 0x33 0x38 0x34 0x30 0x30 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x42 0x41 0x55 0x44 0x3D 0x33 0x38 0x34 0x30 0x30 0x23 0x0D 0x0A 0x00 Write <CR>*baud=57600#<CR> 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x35 0x37 0x36 0x30 0x30 0x23 0x0D >.*baud=57600#...*baud=57600# 0x3E 0x00 0x2A 0x62 0x61 0x75 0x64 0x3D 0x35 0x37 0x36 0x30 0x30 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x42 0x41 0x55 0x44 0x3D 0x35 0x37 0x36 0x30 0x30 0x23 0x0D 0x0A 0x00 Write <CR>*baud=115200#<CR> 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x31 0x31 0x35 0x32 0x30 0x30 0x23 0x0D >.*baud=115200#...*baud=115200# 0x3E 0x00 0x2A 0x62 0x61 0x75 0x64 0x3D 0x31 0x31 0x35 0x32 0x30 0x30 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x42 0x41 0x55 0x44 0x3D 0x31 0x31 0x35 0x32 0x30 0x30 0x23 0x0D 0x0A 0x00 Read Baud Rate <CR>*baud=?#<CR> 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x3F 0x23 0x0D >.*baud=?#...*baud=115200# 0x3E 0x00 0x2A 0x0D 0x2A 0x62 0x61 0x75 0x64 0x3D 0x3F 0x23 0x0D 0x0D 0x0A 0x00 0x2A 0x42 0x41 0x55 0x44 0x3D 0x31 0x31 0x35 0x32 0x30 0x30 0x23 0x0D 0x0A 0x00 Note : This is an example for inquiry command with current baud rate is
9 Picture Setting Type Operation ASCII Note Write Contrast + <CR>*con=+#<CR> power on Write Contrast - <CR>*con=-#<CR> power on Write Contrast value <CR>*con=?#<CR> power on Write Brightness + <CR>*bri=+#<CR> power on Write Brightness - <CR>*bri=-#<CR> power on Write Brightness value <CR>*bri=?#<CR> power on Write Aspect 4:3 <CR>*asp=4:3#<CR> power on Write Aspect 16:9 <CR>*asp=16:9#<CR> power on Write Aspect Auto <CR>*asp=AUTO#<CR> power on Write Aspect Real <CR>*asp=REAL#<CR> power on Write Aspect Letterbox <CR>*asp=LBOX#<CR> power on Write Aspect Wide <CR>*asp=WIDE#<CR> power on Write Aspect <CR>*asp=ANAM#<CR> power on Anamorphic Write Auto <CR>*auto#<CR> power on, RGB source with signal Write Contrast + <CR>*con=+#<CR> 0D 2A 63 6F 6E 3D 2B 23 0D >.*con=+#...*con=+#... 3E 00 2A 63 6F 6E 3D 2B 23 0D 0D 0A 00 2A 43 4F 4E 3D 2B 23 0D 0A 00 Write Contrast - <CR>*con=-#<CR> 0D 2A 63 6F 6E 3D 2D 23 0D >.*con=-#...*con=-#... 3E 00 2A 63 6F 6E 3D 2D 23 0D 0D 0A 00 2A 43 4F 4E 3D 2D 23 0D 0A 00 Read Contrast value <CR>*con=?#<CR> 0D 2A 63 6F 6E 3D 3F 23 0D >.*con=?#...*con=0#... 3E 0 2A 63 6F 6E 3D 3F D D A 0 2A 43 4F 4E 3D D A 0 Write Brightness + <CR>*bri=+#<CR> 0D 2A D 2B 23 0D >.*bri=+#...*bri=+#... 3E 00 2A D 2B 23 0D 0D 0A 00 2A D 2B 23 0D 0A 00 Write Brightness - <CR>*bri=-#<CR> 0D 2A D 2D 23 0D >.*bri=-#...*bri=-#... 3E 00 2A D 2D 23 0D 0D 0A 00 2A D 2D 23 0D 0A
10 Read Brightness value <CR>*bri=?#<CR> 0D 2A D 3F 23 0D >.*bri=?#...*bri=50#... 3E 0 2A D 3F D D A 0 2A D D A 0 Write Aspect 4:3 <CR>*asp=4:3#<CR> 0D 2A D 34 3A D >.*asp=4:3#...*asp=4:3#... 3E 00 2A D 34 3A D 0D 0A 00 2A D 34 3A D 0A 00 Write Aspect 16:9 <CR>*asp=16:9#<CR> 0D 2A D A D >.*asp=16:9#...*asp=16:9#... 3E 00 2A D A D 0D 0A 00 2A D A D 0A 00 Write Aspect Auto <CR>*asp=AUTO#<CR> 0D 2A D F 23 0D >.*asp=auto#...*asp=auto#... 3E 00 2A D F 23 0D 0D 0A 00 2A D F 23 0D 0A 00 Write Aspect Real <CR>*asp=REAL#<CR> 0D 2A D C 23 0D >.*asp=real#...*asp=real#... 3E 00 2A D C 23 0D 0D 0A 00 2A D C 23 0D 0A 00 Write Aspect <CR>*asp=LBOX#<CR> 0D 2A D 4C 42 4F D Letterbox >.*asp=lbox#...*asp=lbox#... 3E 00 2A D 4C 42 4F D 0D 0A 00 2A D 4C 42 4F D 0A 00 Write Aspect Wide <CR>*asp=WIDE#<CR> 0D 2A D D >.*asp=wide#...*asp=wide#... 3E 00 2A D D 0D 0A 00 2A D D 0A 00 Write Aspect <CR>*asp=ANAM#<CR> 0D 2A D 41 4E 41 4D 23 0D Anamorphic >.*asp=anam#...*unsupported item #... 3E 00 2A D 41 4E 41 4D D D A 0 2A 55 6E F D 23 0D 0A
11 Write Auto <CR>*auto#<CR> 0D 2A F 23 0D >.*auto#...*auto#... 3E 00 2A F 23 0D 0D 0A 00 2A F 23 0D 0A 00 Lamp Control Type Operation ASCII Note Read Lamp 1 Hour <CR>*ltim=?#<CR> Lamp1 usage hour, standby, power on Read Lamp 2 Hour <CR>*ltim2=?#<CR> Lamp2 usage hour, standby, power on Write Normal mode <CR>*lampm=lnor#<CR> Power on Write Economic <CR>* lampm Power on mode =eco#<cr> Write Dual Brightest <CR>* lampm Power on =dualbr#<cr> Write Dual Reliable <CR>* lampm Power on =dualre#<cr> Write Single Alternative <CR>* lampm =single#<cr> Power on Read LampMode Status <CR>*lampm=?#<CR> Power on Read Lamp 1 Hour <CR>*ltim=?#<CR> 0D 2A 6C D 3D 3F 23 0D >.*ltim=?#...*ltim=1#... 3E 00 2A 6C D 3D 3F 23 D D A 0 2A 4C D 3D D 0A 00 Read Lamp 2 Hour <CR>*ltim2=?#<CR> 0D 2A 6C D 32 3D 3F 23 0D >.*ltim 2=?#...*LTIM 2=1#... 3E 00 2A 6C D 32 3D 3F D D A 0 2A 4C D 32 3D D 0A 00 Write Normal mode <CR>*lampm=lnor#<CR> 0D 2A 6C 61 6D 70 6D 3D 6C 6E 6F D >.*lampm = lnor #...*Unsupported item#... 3E 00 2A 6C 61 6D 70 6D 3D 6C 6E 6F D D A 0 2A 55 6E F D 23 0D 0A 00 Write Economic <CR>* lampm 0D 2A 20 6C 61 6D 70 6D 20 3D D mode =eco#<cr> >.*lampm =ec#...*unsupported item#... 3E 00 2A 20 6C 61 6D 70 6D 20 3D D 0D 0A 00 2A 55 6E F D 23 0D 0A 00 Write Dual Brightest <CR>* lampm 0D 2A 20 6C 61 6D 70 6D 20 3D D 122
12 >.*lampm=du#... *Unsupported item#... =dualbr#<cr> 3E 00 2A 20 6C 61 6D 70 6D 20 3D D 0D 0A 00 2A 55 6E F D 23 0D 0A 00 Write Dual Reliable <CR>* lampm =dualre#<cr> 0D 2A 20 6C 61 6D 70 6D 20 3D C D >.*lampm =dualre#...* LAMPM=DUALRE #... 3E 00 2A 20 6C 61 6D 70 6D 20 3D C D 0D 0A 00 2A 4C 41 4D 50 4D 3D C D 0A 00 Write Single <CR>* lampm 0D 2A 20 6C 61 6D 70 6D 20 3D D Alternative =single#<cr> >.*lampm= si#...*unsupported item#... 3E 00 2A 20 6C 61 6D 70 6D 20 3D D 0D 0A 00 2A 55 6E F D 23 0D 0A 00 Read LampMode Status <CR>*lampm=?#<CR> 0D 2A 6C 61 6D 70 6D 3D 3F 23 0D >.*lampm =?#...*LAMPM=SINGLE#... 3E 00 2A 6C 61 6D 70 6D 3D 3F D 0D 0A 00 2A 4C 41 4D 50 4D 3D E 47 4C D 0A 00 Miscellaneous Type Operation ASCII Note Write Blank On <CR>*blank=on#<CR> power on Write Blank Off <CR>*blank=off#<CR> power on Read Blank Status <CR>*blank=?#<CR> power on Write Freeze On <CR>*freeze=on#<CR> power on Write Freeze Off <CR>*freeze=off#<CR> power on Read Freeze Status <CR>*freeze=?#<CR> power on Write Menu On <CR>*menu=on#<CR> power on Write Menu Off <CR>*menu=off#<CR> power on Write Up <CR>*up#<CR> power on Write Down <CR>*down#<CR> power on Write Right <CR>*right#<CR> power on Write Left <CR>*left#<CR> power on Write enter <CR>*enter#<CR> power on Write Zoom In <CR>*zoomI#<CR> power on Write Zoom In <CR>*zoomO#<CR> power on Write Blank On <CR>*blank=on#<CR> 0D 2A 62 6C 61 6E 6B 3D 6F 6E 23 0D >.*blank = on#...*blank=on#... 3E 0 2A 62 6C 61 6E 6B 3D 6F 6E 23 D D A 0 2A 42 4C 41 4E 4B 3D 4F 4E 23 D A 0 123
13 Write Blank Off <CR>*blank=off#<CR> 0D 2A 62 6C 61 6E 6B 3D 6F D >.*blank = off#...*blank = OFF#... 3E 0 2A 62 6C 61 6E 6B 3D 6F D D A 0 2A 42 4C 41 4E 4B 3D 4F D A 0 Read Blank Status <CR>*blank=?#<CR> 0D 2A 62 6C 61 6E 6B 3D 3F 23 0D >.*blank =?#...*BLANK=OFF#... 3E 0 2A 62 6C 61 6E 6B 3D 3F 23 D D A 0 2A 42 4C 41 4E 4B 3D 4F D A 0 Write Freeze On <CR>*freeze=on#<CR> 0D 2A A 65 3D 6F 6E 23 0D >.* freeze = on#...*freeze = ON#... 3E 0 2A A 65 3D 6F 6E 23 D D A 0 2A A 45 3D 4F 4E 23 D A 0 Write Freeze Off <CR>*freeze=off#<CR> 0D 2A A 65 3D 6F D >.*freeze = off#...*freeze = OFF#... 3E 0 2A A 65 3D 6F D D A 0 2A A 45 3D 4F D A 0 Read Freeze Status <CR>*freeze=?#<CR> 0D 2A A 65 3D 3F 23 0D >.*freeze =?#...*FREEZE = OFF#... 3E 0 2A A 65 3D 3F 23 D D A 0 2A A 45 3D 4F D A 0 Write Menu On <CR>*menu=on#<CR> 0D 2A 6D 65 6E 75 3D 6F 6E 23 0D >.*menu= on#...*menu=menu#... 3E 0 2A 6D 65 6E 75 3D 6F 6E 23 D D A 0 2A 4D 45 4E 55 3D 4D 45 4E D A 0 Write Menu Off <CR>*menu=off#<CR> 0D 2A 6D 65 6E 75 3D 6F D >.*menu =off #...*MENU=MENU#... 3E 0 2A 6D 65 6E 75 3D 6F D D A 0 2A 4D 45 4E 55 3D 4D 45 4E D A 0 Write Up <CR>*up#<CR> 0D 2A D >.*up#...*up#... 3E 00 2A D 0D 0A 00 2A D 0A 00 Write Down <CR>*down#<CR> 0D 2A 64 6F 77 6E 23 0D >.*down #...* DOWN#... 3E 00 2A 64 6F 77 6E 23 0D 0D 0A 00 2A 44 4F 57 4E 23 0D 124
14 0A 00 Write Right <CR>*right#<CR> 0D 2A D >.* right#...*right #... 3E 00 2A D 0D 0A 00 2A D 0A 00 Write Left <CR>*left#<CR> 0D 2A 6C D >.* left #...*LEFT#... 3E 00 2A 6C D 0D 0A 00 2A 4C D 0A 00 Write Enter <CR>*enter#<CR> 0D 2A 65 6E D >.*enter#...*enter#... 3E 00 2A 65 6E D 0D 0A 00 2A 45 4E D 0A 00 Write Zoom In <CR>*zoomI#<CR> 0D 2A 7A 6F 6F 6D D >.*zoomi #...*ZOOMI#... 3E 0 2A 7A 6F 6F 6D D D A 0 2A 5A 4F 4F 4D D 0A 00 Write Zoom Out <CR>*zoomO#<CR> 0D 2A 7A 6F 6F 6D 4F 23 0D >.*zoomo #...*ZOOMO #... 3E 0 2A 7A 6F 6F 6D 4F 23 D D A 0 2A 5A 4F 4F 4D 4F 23 0D 0A
15 DDC D-Sub EDID Block 0, Bytes [00H-7FH] Block Type: EDID A B C D E F 0 00 FF FF FF FF FF FF D1 01 CA E A A BD EF C C C C A FD F 50 5D A FE E 51 0A FC D A D (08H-09H) ID Manufacturer Name = BNQ (0AH-0BH) Product ID Code = CA01 (0CH-0FH) Last 5 Digits of Serial Number = (10H) Week of Manufacture = 50 (11H) Year of Manufacture = 2008 (12H) EDID Version Number = 1 (13H) EDID Revision Number = 3 (14H) VIDEO INPUT DEFINITION: Analog Signal 0.700, (1.000 Vp-p) Sync on Green, Composite Sync, Separate Syncs (15H) Maximum Horizontal Image Size = mm (16H) Maximum Vertical Image Size = mm (17H) Display Gamma = 2.20 (18H) DPMS and Supported Feature(s): Preferred Timing Mode Display Type = R/G/B Color (19H-22H) CHROMA INFO: Red x Green x Blue x White x Red y Green y Blue y White y (23H) ESTABLISHED TIMING I: 720 x 70Hz (IBM,VGA) 640 x 60Hz (IBM,VGA) 640 x 67Hz (Apple,Mac II) 640 x 72Hz (VESA) 640 x 75Hz (VESA) 800 x 60Hz (VESA) (24H) ESTABLISHED TIMING II: 800 x 72Hz (VESA) 800 x 75Hz (VESA) 832 x 75Hz (Apple,Mac II) 1024 x 60Hz (VESA) 1024 x 70Hz (VESA) 1024 x 75Hz (VESA) 126
16 1280 x 75Hz (VESA) (25H) Manufacturer's Reserved Timing: 1152 x 75Hz (Apple,Mac II) (38-53) Standard Timing Identification: Standard Timing ID 1: 640 x Standard Timing ID 2: 1280 x Standard Timing ID 3: 1024 x Standard Timing ID 4: 1280 x Standard Timing ID 5: 800 x Standard Timing ID 6: 1024 x Standard Timing ID 7: 1600 x Standard Timing ID 8: 1280 x (36H-47H) Detailed Timing / Descriptor Block 1: 1024x768 Pixel Clock: MHz Horizontal Image Size: 0 mm Vertical Image Size: 0 mm Refreshed Mode: Non-Interlaced Normal Display - No Stereo Horizontal: Active Count: 1024 pixels Blanking Count: 320 pixels Sync Offset: 24 pixels Sync Pulse Width: 136 pixels Border: 0 pixels Frequency: khz Vertical: Active Count: 768 lines Blanking Count: 38 lines Sync Offset: 3 lines Sync Pulse Width: 6 lines Border: 0 lines Frequency: Hz Digital Separate, Horizontal Polarity (-) Vertical Polarity (-) (48H-59H) Detailed Timing / Descriptor Block 2: Monitor Range Limits: Min Vertical Freq - 48 Hz Max Vertical Freq Hz Min Horiz. Freq - 31 khz Max Horiz. Freq - 93 khz Pixel Clock MHz GTF - Not Used (5AH-6BH) Detailed Timing / Descriptor Block 3: ASCII Data: BENQ (6CH-7DH) Detailed Timing / Descriptor Block 4: Monitor Name: MP776ST (7EH) Block No: No Extension EDID Block(s) CheckSum OK 127
17 DDC HDMI EDID Block 0, Bytes [00H-7FH] Block Type: EDID A B C D E F 0 00 FF FF FF FF FF FF D1 01 CA A A BD EF C C C A FD F 50 5D A FE E 51 0A FC D A A9 (08H-09H) ID Manufacturer Name = BNQ (0AH-0BH) Product ID Code = CA01 (0CH-0FH) Last 5 Digits of Serial Number = (10H) Week of Manufacture = 50 (11H) Year of Manufacture = 2008 (12H) EDID Version Number = 1 (13H) EDID Revision Number = 3 (14H) VIDEO INPUT DEFINITION: Digital Signal (15H) Maximum Horizontal Image Size = mm (16H) Maximum Vertical Image Size = mm (17H) Display Gamma = 2.20 (18H) DPMS and Supported Feature(s): Preferred Timing Mode Display Type = R/G/B Color (19H-22H) CHROMA INFO: Red x Green x Blue x White x Red y Green y Blue y White y (23H) ESTABLISHED TIMING I: 720 x 70Hz (IBM,VGA) 640 x 60Hz (IBM,VGA) 640 x 67Hz (Apple,Mac II) 640 x 72Hz (VESA) 640 x 75Hz (VESA) 800 x 60Hz (VESA) (24H) ESTABLISHED TIMING II: 800 x 72Hz (VESA) 800 x 75Hz (VESA) 832 x 75Hz (Apple,Mac II) 1024 x 60Hz (VESA) 1024 x 70Hz (VESA) 1024 x 75Hz (VESA) 1280 x 75Hz (VESA) 128
18 (25H) Manufacturer's Reserved Timing: 1152 x 75Hz (Apple,Mac II) (38-53) Standard Timing Identification: Standard Timing ID 1: 640 x Standard Timing ID 2: 1280 x Standard Timing ID 3: 800 x Standard Timing ID 4: 1280 x Standard Timing ID 5: 1024 x Standard Timing ID 6: 1440 x Standard Timing ID 7: 1600 x Standard Timing ID 8: 1280 x (36H-47H) Detailed Timing / Descriptor Block 1: 1024x768 Pixel Clock: MHz Horizontal Image Size: 0 mm Vertical Image Size: 0 mm Refreshed Mode: Non-Interlaced Normal Display - No Stereo Horizontal: Active Count: 1024 pixels Blanking Count: 320 pixels Sync Offset: 24 pixels Sync Pulse Width: 136 pixels Border: 0 pixels Frequency: khz Vertical: Active Count: 768 lines Blanking Count: 38 lines Sync Offset: 3 lines Sync Pulse Width: 6 lines Border: 0 lines Frequency: Hz Digital Separate, Horizontal Polarity (-) Vertical Polarity (-) (48H-59H) Detailed Timing / Descriptor Block 2: Monitor Range Limits: Min Vertical Freq - 48 Hz Max Vertical Freq Hz Min Horiz. Freq - 31 khz Max Horiz. Freq - 93 khz Pixel Clock MHz GTF - Not Used (5AH-6BH) Detailed Timing / Descriptor Block 3: ASCII Data: BENQ (6CH-7DH) Detailed Timing / Descriptor Block 4: Monitor Name: MP776ST (7EH) Block No: (7FH) (01) Extension EDID Block(s) CheckSum OK 129
19 EDID Block 1, Bytes [80H-FFH] Block Type: CEA EDID Timing Extension Version A B C D E F F F C E D 00 BC 52 D0 1E 20 B E 01 1D C C E 01 1D 80 D0 72 1C C E 8C 0A D0 8A 20 E0 2D A C 0A D0 8A 20 E0 2D A AB Extended Block Type: CEA 861B Detailed Timing Blocks start at Byte:(1FH) Native Format: (0x1) (03H) YCbCr (4:4:4) (03H) YCbCr (4:2:2) Video Short Block Description: (05H) 720 x 480 P 59.94/60Hz 4:3 (06H) 720 x 576 P 50Hz 4:3 (07H) 1280 x 720 P 59.94/60Hz 16:9 Native Mode (08H) 1280 x 720 P 50Hz 16:9 (09H) 1920 x 1080 I 59.94/60Hz 16:9 (0AH) 1920 x 1080 I 50Hz 16:9 (0BH) 1920 x 1080 P 59.94/60Hz 16:9 (0CH) 1920 x 1080 P 50Hz 16.9 Audio Short Block Description: Numbers of Audio Channels (2) (0EH) Audio Supported: Audio Bit Rate: Linear PCM(IEC60958) 32kHz, 44.1kHz, 48kHz, 96kHz 16bit, 20Bit, 24Bit Speaker Short Block Description: Playload(3 bytes 12H-14H) Speakers (12H): FL/FR 13H: Reserved 14H: Reserved Vendor Specific Short Block Description: Bytes: 03H, 0CH, 00H, 10H, 00H (1FH - 31H) Detailed Timing Descriptions: 1280x720 Pixel Clock: MHz Horizontal Image Size: 0 mm Vertical Image Size: 0 mm Refreshed Mode: Non-Interlaced Normal Display - No Stereo Horizontal: Active Count: 1280 pixels Blanking Count: 700 pixels Sync Offset: 440 pixels Sync Pulse Width: 40 pixels 130
20 Border: 0 pixels Frequency: khz Vertical: Active Count: 720 lines Blanking Count: 30 lines Sync Offset: 5 lines Sync Pulse Width: 5 lines Border: 0 lines Frequency: Hz Digital Separate, Horizontal Polarity (+) Vertical Polarity (+) (31H - 43H) Detailed Timing Descriptions: 1920x540 Pixel Clock: MHz Horizontal Image Size: 0 mm Vertical Image Size: 0 mm Refreshed Mode: Interlaced Normal Display - No Stereo Horizontal: Active Count: 1920 pixels Blanking Count: 280 pixels Sync Offset: 88 pixels Sync Pulse Width: 44 pixels Border: 0 pixels Frequency: khz Vertical: Active Count: 540 lines Blanking Count: 22 lines Sync Offset: 2 lines Sync Pulse Width: 5 lines Border: 0 lines Frequency: Hz Digital Separate, Horizontal Polarity (+) Vertical Polarity (+) (43H - 55H) Detailed Timing Descriptions: 1920x540 Pixel Clock: MHz Horizontal Image Size: 0 mm Vertical Image Size: 0 mm Refreshed Mode: Interlaced Normal Display - No Stereo Horizontal: Active Count: 1920 pixels Blanking Count: 720 pixels Sync Offset: 528 pixels Sync Pulse Width: 44 pixels Border: 0 pixels Frequency: khz Vertical: Active Count: 540 lines Blanking Count: 22 lines Sync Offset: 2 lines Sync Pulse Width: 5 lines Border: 0 lines Frequency: Hz Digital Separate, Horizontal Polarity (+) Vertical Polarity (+) (55H - 67H) Detailed Timing Descriptions: 720x480 Pixel Clock: MHz Horizontal Image Size: 0 mm Vertical Image Size: 0 mm Refreshed Mode: Non-Interlaced Normal Display - No Stereo Horizontal: Active Count: 720 pixels Blanking Count: 138 pixels Sync Offset: 16 pixels Sync Pulse Width: 58 pixels Border: 0 pixels Frequency: khz Vertical: Active Count: 480 lines Blanking Count: 45 lines Sync Offset: 9 lines Sync Pulse Width: 6 lines Border: 0 lines Frequency: Hz Digital Separate, Horizontal Polarity (-) Vertical Polarity (-) (67H - 79H) Detailed Timing Descriptions: 720x480 Pixel Clock: MHz 131
21 Horizontal Image Size: 0 mm Refreshed Mode: Non-Interlaced Horizontal: Active Count: 720 pixels Sync Offset: 16 pixels Border: 0 pixels Vertical: Active Count: 480 lines Sync Offset: 9 lines Border: 0 lines Vertical Image Size: 0 mm Normal Display - No Stereo Blanking Count: 138 pixels Sync Pulse Width: 58 pixels Frequency: khz Blanking Count: 45 lines Sync Pulse Width: 6 lines Frequency: Hz Digital Separate, Horizontal Polarity (-) Vertical Polarity (-) (7FH) CheckSum Valid 132
PU9530/PW9520/PX9510 Projector RS232 Command Control Installation Guide
PU9530/PW9520/PX9510 Projector RS232 Command Control Installation Guide Table of Contents Introduction... 3 Wire arrangement... 3 RS232 pin assignment... 3 Connections and communication settings... 4 RS232
More information<Pin assignment: CONN1> Pin Description Pin Description 1 NC 2 RXD 3 TXD 4 NC 5 GND 6 NC 7 RTS 8 CTS 9 NC
BenQ RS232 Code Model: MP722 MP723 MP771 SP870 1. Connection : The below shows the illustration of connection between control terminal and projector. WIRE RUN LIST CONN1 COLOR CONN2 3 BLACK 1 7 BROWN 2
More informationSC-HDMI-2A Available Output Resolutions & Supported Input Resolutions
1163 Warner Ave Tustin, CA 92780 (714) 641-6607 www.hallresearch.com 2015-03-27 SC-HDMI-2A Available Output Resolutions & Supported Input Resolutions 1.0 Output Resolutions Since the device is a scaler
More informationHDMI EDID Emulator In a Nutshell
1163 Warner Ave Tustin, CA 92780 (714) 641-6607 www.hallresearch.com HDMI EDID Emulator In a Nutshell The EM-HD-NCP is a HDMI EDID emulator. It passes all the video signals across with the exception of
More informationDigital Projector X30N/X35N
Digital Projector X30N/X35N Operator's Guide TECHNICAL Warranty 3M warrants that when the 3M Product is used according to 3M s Intended Use Statement (www.3m.com/meetings), it will perform satisfactorily
More informationCP-X253. User's Manual (detailed) Technical. Example of PC signal. Projector
Projector CP-X253 User's Manual (detailed) Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA
More informationX64. Operator's Guide TECHNICAL. Example of PC signal
X64 Operator's Guide TECHNICAL Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA (60Hz) 640 x 480
More informationDigital Projector X30 Operator's Guide TECHNICAL
Digital Projector X30 Operator's Guide TECHNICAL Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9 VESA VGA
More informationFLAT WIDE DISPLAY FWD-50PX1. PROTOCOL MANUAL (USER CONTROL ONLY) 1st Edition
FLAT WIDE DISPLAY PROTOCOL MANUAL (USER CONTROL ONLY) 1st Edition Table of Contents 1. Communication Parameter... 3 2. Pin Configuration... 3 3. Communication Data Format... 3 4. General Function... 5
More informationTECHNICAL CP-SX1350. User's Manual - Operating Guide. Dimensions. Projector. [unit: mm]
INTER M1-D INPUT LENS SHIFT FOCUS ZOOM RESET COMPONENT VIDEO STANDBY/ON TEMP LAMP MENU Projector CP-SX1350 User's Manual - Operating Guide TECHNICAL KEYSTONE SEARCH RGB BNG S-VIDEO Dimensions [unit: mm]
More informationExample of PC signal. Projector CP-X2010/CP-X2510/CP-X3010 User's Manual (detailed) Operating Guide Technical
Projector CP-X2010/CP-X2510/CP-X3010 User's Manual (detailed) Operating Guide Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0
More informationLP-AW4001/LP-AW3001/LP-AX3001
LCD Projector LP-AW4001/LP-AW3001/LP-AX3001 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency V. frequency Rating (khz) (Hz)
More informationCP-D10. User's Manual (detailed) Operating Guide Technical. Example of PC signal. Projector
Projector CP-D10 User's Manual (detailed) Operating Guide Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480
More informationVP 729 Command Sets. 4 command update for Geometry Diagonal Projection 5 Add error code
VP 729 Command Sets History No Issue Date Version Description Firmware 1 2008/3/19 V1.0 First release 1. Add only those that we can t simulate their pressing using other commands of the protocol, such
More informationLP-WU9100B User's Manual (detailed) Operating Guide Technical
DLP Projector LP-WU9100B User's Manual (detailed) Operating Guide Technical Supported Signal Input Modes Signal Format PC Apple MAC SDTV EDTV Resolution H Freq. KHz Frame Rate Hz PCLK MHz 5 B N C VGA RGB
More informationVESA ENHANCED EXTENDED DISPLAY IDENTIFICATION DATA PROPOSED STANDARD. Release A, Revision 2 Draft 3 June 12, 2002
E-EDID Standard VESA Video Electronics Standards Association 920 Hillview Court, Suite 140 Phone: (408) 957-9270 Milpitas, CA 95035 Fax: (408) 957-9277 Purpose VESA ENHANCED EXTENDED DISPLAY IDENTIFICATION
More informationGeneric RS232 protocol
Generic RS232 protocol Table of content 1 Introduction... 2 2 Description... 2 2.1 Hardware specification... 2 2.2 Communication Setting... 2 2.3 Command Message Reference... 3 3 Protocol 1 : with ID...
More informationVP 729 Command Sets. 1 Serial Configuration: 2 Command Format: - Baud rate:9600(bits per second) - Data bits:8bits - Parity:None - Stop bits:1bit
VP 729 Command Sets 1 Serial Configuration: - Baud rate:9600(bits per second) - Data bits:8bits - Parity:None - Stop bits:1bit 2 Command Format: 2.1 Communication confirm Send Reply 2.2 Set Command CR
More informationService Manual. ViewSonic VX2835wm-1. Model No. VS wide Color TFT LCD Display
Service Manual ViewSonic VXwm- Model No. VS wide Color TFT LCD Display (VXwm-_SM Rev. b Jun.00) ViewSonic Brea Canyon Road, Walnut, California 99 USA - (00) - Copyright Copyright 00 by ViewSonic Corporation.
More informationCP-SX635. User's Manual Operating Guide Technical. Projector
Projector CP-SX635 User's Manual Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480
More informationProjector CP-WU8700/CP-WX8750/CP-X8800 CP-WU8600/CP-WX8650 User's Manual (detailed) Operating Guide Technical
Projector CP-WU8700/CP-WX8750/CP-X8800 CP-WU8600/CP-WX8650 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency V. frequency
More informationDigital Projector X95i Operator's Guide
Digital Projector X95i Operator's Guide TECHNICAL Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5 59.9
More information1. D-sub 15-pin Shrink Connector (RGB IN 1/RGB IN 2/RGB OUT) Pin No Signal Pin No Signal Pin No Signal 1 Video input Red 9 -
Dimension Diagram 98 9.6 76. Pin No Signal Pin No Signal Pin No Signal Video input Red 9 - RGB IN : SCL(DDC) Video input Green 0 Ground RGB IN : - Video input Blue - RGB OUT: - - RGB IN : SDA(DDC) Ground
More information====================================================================== Control Commands for LV series Rev1.0.4
====================================================================== Control Commands for LV series Rev1.0.4 Copyright (C) NEC Display Solutions, Ltd. 2006-2010 ----- Updated on January 25, 2010 -----
More informationLW502/LWU502 User's Manual (detailed) Operating Guide - Technical
LW502/LWU502 User's Manual (detailed) Operating Guide - Technical 020-001099-01 LCD Projector LW502/LWU502 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution
More informationRev.1.0(G5) INDEX. I. Application II. Preparation Connectors and wiring RS-232C Remote control LAN control...
External Control NEC LCD Monitor Rev.1.0(G5) INDEX I. Application... 4 II. Preparation... 5 2. Connectors and wiring... 5 2.1 RS-232C Remote control... 5 2.2 LAN control... 5 III. Communication specification...
More information1. D-sub 15-pin Shrink Connector (RGB IN 1/RGB IN 2/RGB OUT) Pin No Signal Pin No Signal Pin No Signal 1 Video input Red 9 -
TECHNICAL Dimension Diagram 98 5 9.6 76.5 Pin No Signal Pin No Signal Pin No Signal Video input Red 9 - RGB IN : SCL(DDC) Video input Green 0 Ground 5 RGB IN : - 3 Video input Blue - RGB OUT: - - RGB IN
More informationProjector Control Command Reference Manual
Projector Control Reference Manual NEC Display Solutions, Ltd. 2014-2017 BDT140013 Revision 6.1 Introduction This manual describes the commands used to control an NEC-made projector from a PC or other
More informationSIM2 C3XLUMIS HOST RS-232C and TCP/IP Control Specifications
SIM2 Multimedia SIM2 C3XLUMIS HOST RS-232C and TCP/IP Control Specifications Rev. 1.0 (20 January 2009) Contents Contents 2 1 Introduction 3 1.1 Setting up the RS-232C Serial connection...........................
More informationC3X1080 RS-232C CONTROL SPECIFICATIONS
SIM2 Multimedia C3X1080 RS-232C CONTROL SPECIFICATIONS Rev. 1.1 (30 January 2008) Contents Contents 2 1 Introduction 3 1.1 Setting up the RS-232C Serial connection........................... 3 1.2 Execution
More informationS-Video S-Video1 0x02 0x00 S-Video2. 0x01 S-Video3. Component Component1 0x03 0x00 Component2. 0x01 Component3. PC PC1 0x04 0x00 PC2.
General Power Power 0x00 0x00 0x00 0x00 Off Volume Direct 0x00 0x00 (0~100) Up 0x00 Down 0x00 Mute 0x00 0x00 0x00 Ch. Direct - Continuous Up 0x00 0x00 Down 0x00 Input Source List TV TV 0x0a 0x00 0x00 0x00
More informationService Manual. ViewSonic VP2130b-1. Model No. VS Color TFT LCD Display
Service Manual ViewSonic VP0b- Model No. VS077 Color TFT LCD Display (VP0b-_SM Rev. a Dec. 00) ViewSonic 8 Brea Canyon Road, Walnut, California 9789 USA - (800) 888-88 Copyright Copyright 00 by ViewSonic
More information6. Front Project RS-232 Protocol Specification
Pro 45000dp RS232 Codes Rev. 01 6. Front Project RS-232 Protocol Specification RS232 Setting Baud rate: 9600 Parity check: None Data bit: 8 Stop bit: 1 Flow Control None Minimum delay for next command:
More informationP-4 Connection procedure (continued)
P-4 Connection procedure (continued) Connecting with a computer (analog connection) Analog connection: Connection via RGB3 IN (D-SUB) connector (1) Connect a signal cable (mini D-SUB 15-pin mini D-SUB
More informationDell S500/S500wi RS232 Protocol Document
Dell S500/S500wi RS232 Protocol Document RS232 Projector Pin Assignment (Facing Projector) RS232 Serial Communication Cable Pin Assignment (Facing Cable) Pin Assignments RS232 PIN DESCRIPTION MINI DIN-6
More informationRS232/LAN Serial Communication Control. Specification for A3112 (MDT701S/LDT701V)
RS232/LAN Serial Communication Control Specification for A3112 (MDT701S/LDT701V) 1. Application This document defines the communication protocols for serial control of the A3112(MDT701S/LDT701V). A3112:
More informationSIM2 Multimedia SIRIO. Rev. 1.0 (02 April 2014) SIRIO RS 232 Control
SIM2 Multimedia Rev. 1.0 (02 April 2014) 1 Contents Contents 2 1. Introduction 3 1.1. Setting up the RS 232C Serial connection.......................................................3 1.2. Execution of
More informationRS-232 Serial Communication Control
RS-232 Serial Communication Control for LDT323V 1. Application This document defines the communication protocols for serial control of the LDT323V. -----Revision History----- 1 st Draft Release: Dec. 09
More informationRev.1.0 (G2E) INDEX. I. Application II. Preparation Connectors and wiring RS-232C Remote control LAN control...
External Control NEC LCD Monitor Rev.1.0 (G2E) INDEX I. Application... 3 II. Preparation... 4 2. Connectors and wiring... 4 2.1 RS-232C Remote control... 4 2.2 LAN control... 4 III. Communication specification...
More informationBaud Rate Data Bit Parity Bit Stop Bit
RS232 Protocol e-screen PTX-6500UHD / PTX-8500UHD Revision: 11 RS232 Command Format STX(1byte) + IDT(1byte)+ Type(1byte)+ CMD(3bytes)+ [/(1byte)] + ETX(1byte) STX : Start byte = 07 IDT Type CMD : Don t
More informationDell 4610X RS232 Protocol Document
Dell 4610X RS232 Protocol Document RS232 Projector Pin Assignment (Facing Projector) RS232 Serial Communication Cable Pin Assignment (Facing Cable) Pin Assignments RS232 PIN DESCRIPTION MINI DIN-6 1 2
More informationUser Manual BI19AVTL VGA, HDMI, YPBPR, AV, SVIDEO & TV Board. Contents
User Manual BI19AVTL VGA, HDMI, YPBPR, AV, SVIDEO & TV Board Thanks for you selecting our products. Before using the A/D board, please read this manual thoroughly, and retain it for future reference. It
More informationC1098 JPEG Module User Manual
C1098 JPEG Module User Manual General Description C1098 is VGA camera module performs as a JPEG compressed still camera that can be attached to a wireless or PDA host. Users can send out a snapshot command
More informationDOMINO 20H DOMINO 30H DLP VIDEO PROJECTOR RS-232C CONTROL SPECIFICATIONS. Document Revision 1.1 (20 July 2004)
DOMINO 20H DOMINO 30H DLP VIDEO PROJECTOR RS-232C CONTROL SPECIFICATIONS Document Revision 1.1 (20 July 2004) Table of Contents 1. INTRODUCTION 3 2. CONNECTION 3 3. COMMUNICATION PROTOCOL 4 HEADER 4 PAYLOAD
More informationIt is intended that IR outputs in AuxIR mode complement the RS232 drive to the main display device.
T470 User s Manual, Part C AuxIR Device support V073 release Ed Schoell, Aug 4th 2017 This manual covers the use of the RES pin in IR mode on the JED T470. This can be set to an IR out mode in the window
More information10. RS-232C communication
10. RS-232C communication PB9200(P5XMLA) Connecting the cable (1) Turn off the projector and the computer power supplies. (2) Connect the CONTROL port of the projector with a RS-232C port of the computer
More informationSIM2 C3X LUMIS UNO RS-232C Control Specifications
SIM2 Multimedia SIM2 C3X LUMIS UNO RS-232C Control Specifications Rev. 1.0 (19 March 2010) Contents Contents 2 1 Introduction 3 1.1 Setting up the RS-232C Serial connection........................... 3
More informationRS232 User Guide. Planar Simplicity Series 4K Displays SL4364K SL5564K SL6564K SL7564K SL8664K. Simplicity Series 4K Displays User Guide A
RS232 User Guide Planar Simplicity Series 4K Displays SL4364K SL5564K SL6564K SL7564K SL8664K 020-1344-00A Page 1 Copyright March 2018 by Leyard Optoelectronics Co., Ltd. and Planar Systems, Inc. All rights
More informationLX750/LW650/LS+700/LW720
LX750/LW650/LS+700/LW720 User Manual - Technical Guide 020-000161-02 Projector LW650/LS+700/LX750/LW720 User's Manual Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency
More informationCP-DW10N. User's Manual (detailed) Operating Guide Technical. Example of PC signal. Projector
Projector CP-DW10N User's Manual (detailed) Operating Guide Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x
More informationControlling the projector using a personal computer
1 2 3 4 5 6 7 8 DLP Projector HC3200 Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions:
More informationDigital Projector X56
Digital Projector X56 Operator's Guide TECHNICAL Warranty 3M warrants that when the 3M Product is used according to 3M s Intended Use Statement (www.3m.com/meetings), it will perform satisfactorily for
More informationResolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode
Projector CP-TW2503/CP-TW3003 User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0
More informationRev.1.0 (G4) INDEX. I. Application II. Preparation Connectors and wiring RS-232C Remote control LAN control...
External Control NEC LCD Monitor Rev.1.0 (G4) INDEX I. Application... 4 II. Preparation... 5 2. Connectors and wiring... 5 2.1 RS-232C Remote control... 5 2.2 LAN control... 5 III. Communication specification...
More informationLCD Projector CP-WU5500/CP-WX5500/CP-X5550 CP-WU5505/CP-WX5505/CP-X5555 User's Manual (detailed) Operating Guide Technical
LCD Projector CP-WU5500/CP-WX5500/CP-X5550 CP-WU5505/CP-WX5505/CP-X5555 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency
More informationCP-TW3506. User's Manual (detailed) Operating Guide Technical. LCD Projector. Supported signals for COMPUTER IN
LCD Projector CP-TW3506 User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency V. frequency Rating (khz) (Hz) 720 x 400 TEXT 37.9
More informationPlanar Simplicity Series
Planar Simplicity Series RS232 PROTOCOL Document 020-1285-00 1. INTRODUCTION 1.1 Purpose The purpose of this document is to explain in detail the commands and steps that can be used to control a Planar
More information61XM4 Installation Guide 61 Plasma Display Rev 1.3
Contents: Product Description and Notes Page 1 Ventilation Requirements Page 2 Display Dimensions Front, Top & Bottom Page 3 Rear Page 4 Left & Right Side Page 5 Display Dimensions w/optional Speakers
More informationKRAMER ELECTRONICS LTD. USER MANUAL MODELS: SID-X1 Step-in Commander. P/N: Rev 5
KRAMER ELECTRONICS LTD. USER MANUAL MODELS: SID-X1 Step-in Commander P/N: 2900-300754 Rev 5 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Shielded Twisted Pair/Unshielded
More informationXI104XUSB. HD+ Quad A/V USB3.0 Capture Box User s Guide. Rev /9/10
XI104XUSB HD+ Quad A/V USB3.0 Capture Box User s Guide Rev 1.0 2012/9/10 Content 1. Preface... 4 2 Minimum Hardware Configuration... 4 3. Recommended Hardware Configuration... 4 4. Software Requirement...
More informationDigital Projector X30N/X35N
Digital Projector X30N/X35N Operator's Guide TECHNICAL Warranty 3M warrants that when the 3M Product is used according to 3M s Intended Use Statement (www.3m.com/meetings), it will perform satisfactorily
More information4K LASER FRONT PROJECTOR REMOTE CODES
4K LASER FRONT PROJECTOR REMOTE CODES Changes Dreamvision provides this manual as is without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability
More informationDell 7609WU RS232 Protocol Document
Dell 7609WU RS232 Protocol Document RS232 Projector Pin Assignment (Facing Projector) RS232 Serial Communication Cable Pin Assignment (Facing Cable) Pin Assignments RS232 PIN DESCRIPTION MINI DIN-6 1 2
More information8950W. User's Manual (detailed) Operating Guide Technical. LCD Projector. Supported signals for COMPUTER IN
LCD Projector 8950W User's Manual (detailed) Operating Guide Technical Supported signals for COMPUTER IN Resolution (H x V) Signal mode H. frequency V. frequency Rating (khz) (Hz) 720 x 400 TEXT 37.9 85
More informationSIM2 Multimedia. M.150 RS-232 Control. Rev. 1.0 (20 January 2012)
SIM2 Multimedia M.150 RS-232 Control Rev. 1.0 (20 January 2012) Contents Contents 2 1 Introduction 3 1.1 Setting up the RS-232C Serial connection........................... 3 1.2 Execution of the command...................................
More informationCP-D27WN/CP-D32WN/CP-DW25WN
Projector CP-D27WN/CP-D32WN/CP-DW25WN User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720 x 400
More informationUser's Manual (detailed) Operating Guide Technical Example of PC signal
Projector CP-X2015WN/CP-X2515WN/CP-X3015WN/ CP-X4015WN/CP-WX2515WN/CP-WX3015WN User's Manual (detailed) Operating Guide Technical Example of PC signal Resolution (H x V) H. frequency (khz) V. frequency
More informationUSER MANUAL. FC-49 DVI / Audio to HDMI Converter MODEL: P/N: Rev 6
KRAMER ELECTRONICS LTD. USER MANUAL MODEL: FC-49 DVI / Audio to HDMI Converter P/N: 2900-000286 Rev 6 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions
More informationD-ILA PROJECTOR RS-232C CONTROL SPECIFICATIONS. Victor Company of Japan, Limited. * D-ILA is a trademark of Victor Company of Japan, Limited.
D-ILA TM PROJECTOR DLA-G3010series DLA-M2000series RS-232C CONTROL SPECIFICATIONS Victor Company of Japan, Limited * D-ILA is a trademark of Victor Company of Japan, Limited. Document Number CTGKE-0013
More informationControlling the projector using a personal computer
DLP Projector EX320U/EW330U/EX320U-ST Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions:
More informationSpecifications: Dell 1703FP Flat Panel Color Monitor User's Guide
Страница 1 Back to Contents Page Specifications: Dell 1703FP Flat Panel Color Monitor User's Guide General Flat Panel Resolution Preset Display Modes Electrical Physical Characteristics Environmental Power
More informationAuxIR and Aux RS232 (Serial 2) Device support V092 release
T470 User s Manual, Part C AuxIR and Aux RS232 (Serial 2) Device support V092 release Sep 20, 2018 Table of Contents T470 User s Manual, Part C AuxIR and Aux RS232 (Serial 2) Device support V086 release
More informationControlling the projector using a personal computer
LCD Projector HC6500 Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions: Turning the
More informationCP-X4022WN/CP-X5022WN/ CP-WX4022WN
Projector CP-X4022WN/CP-X5022WN/ CP-WX4022WN User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720
More informationUser's Manual (detailed) Operating Guide Technical
Projector CP-X4022WN/CP-X5022WN/ CP-WX4022WN User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal mode 720
More informationVCCI (VCCI) ENERGY STAR ENERGY STAR
VCCI (VCCI) B ENERGY STAR ENERGY STAR ENERGY STAR ... 1... 5... 5... 5... 6... 7... 8... 9... 10... 11... 13... 14... 21... 23... 24... 25... 26 /... 26... 26... 26 /... 26 A... 27... 27... 28... 29...
More informationRev.1.3 (G4) INDEX. I. Application II. Preparation Connectors and wiring RS-232C Remote control LAN control...
External Control NEC LCD Monitor Rev.1.3 (G4) INDEX I. Application... 4 II. Preparation... 4 2. Connectors and wiring... 4 2.1 RS-232C Remote control... 4 2.2 LAN control... 5 III. Communication specification...
More informationMDL100 protocol-1.doc 6/12/08
1/9 MDL100 RS232 communication protocol This document is a short description of protocol for message exchange beetwen Personal Computer and MDL100 via RS232. The RS232 must be set with the following parameters:
More informationControlling the projector using a personal computer
DLP Projector EX320U/EW330U/EX320U-ST/EX321U-ST/EW331U-ST/EX321U Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal.
More informationHeader code Command code Data code End code HEX Command Data 0Dh ASCII V Command Data CR
RS-232C Protocol RS232 Setting Baud rate: 9600 Parity check: Data bit: 8 Stop bit: 1 Flow Control UART16550 FIFO None None Disable Minimum delay for next command: 1ms Control Command Structure APPENDIX
More informationADJUSTMENT INSTRUCTION
1. Application Range This specification sheet is applied to all of the LED LCD TV with LD91L chassis. ADJUSTMENT INSTRUCTION 4) Click Connect tab. If Can t is displayed, check connection between computer,
More informationRS232 Protocol Function List
RS3 Protocol Function List Baud Rate : 900 Data Bits: 8 Parity: None Stop Bits: Flow Control : None UART6550 FIFO: Disable Note: It supports data rates from 9600 to 500 bps. The default is 900 bps. Depending
More informationCustom Installation Notes: Serial programming interface for Arcam A/V processors & receivers
Custom Installation Notes: Serial programming interface for Arcam A/V processors & receivers Models covered: AVP700, AVR250, AVR300, AVR350 Contents Applicability... 2 Controlling Arcam A/V processors
More informationAppendix A. Specifications
Appendix A. Specifications Maximum addressability Size (viewable image area) Active display area Brightness Contrast Dimensions The specifications of the monitor are as follows: Horizontal: Vertical: Diagonal
More informationMONOPRICE. Blackbird 4K 5x1 HDMI Presentation Switch. User's Manual P/N 21906
MONOPRICE Blackbird 4K 5x1 HDMI Presentation Switch P/N 21906 User's Manual CONTENTS SAFETY WARNINGS AND GUIDELINES... 4 INTRODUCTION... 4 FEATURES... 5 CUSTOMER SERVICE... 5 PACKAGE CONTENTS... 6 PRODUCT
More informationC628 Enhanced JPEG Module. User Manual
C628 Enhanced JPEG User Manual v1.1 Release Note: 1. May 2, 2006 official released v1.0 2. Dec 27, 2006 revise electrical characteristics Table of Contents Part I - Hardware Overview 1 Features.. 1 Specifications
More informationCP-X2514WN/CP-X3014WN/ CP-X4014WN/CP-WX3014WN
Projector CP-X2514WN/CP-X3014WN/ CP-X4014WN/CP-WX3014WN User's Manual (detailed) Operating Guide Technical Example of computer signal Resolution (H x V) H. frequency (khz) V. frequency (Hz) Rating Signal
More information780 Handheld Test Instrument
Key features + benefits HDMI 1.3 video/audio output Pattern testing including deep color for HDMI inputs on HDTVs 24/30/36 bit at 1080p. HDMI 1.4a 3D Pattern Generation Supports Side-by-Side, Top-and-Bottom
More information1-chip DLP Laser Projector with High Brightness LX-MH502Z
1-chip DLP Laser Projector with High Brightness LX-MH502Z Product Outline The LX-MH502Z is a compact and lightweight 4K UHD DLP laser projector capable of projecting high-resolution 4K images, making it
More informationTFT LCD MONITOR SPECIFICATION
TFT LCD MONITOR SPECIFICATION Model : BTL-XXXXXXXXXXX (Option : DVI & Audio) RoHs Compliant BESTECH Corporation www.bestvision.co.kr 1 CONTENTS 1. Revision History 2. General description 3. Features 4.
More informationA/D Board for High brightness color TFT-LCD module
A/D Board for High brightness color TFT-LCD module Customer: Customer model name: Customer part number: Model name: GL-RS232 AV Remote St Date: September 29, 2014 Version: 01 Note: This specification is
More information780B Video Generator/Analyzer. 780B VIDEO GENERATOR/ANALYZER Test 4K Ultra HD HDMI /60Hz
780B VIDEO GENERATOR/ANALYZER Test 4K Ultra HD HDMI 2.0 devices @ 50/60Hz (Note: Above image shown with optional 4-port board to support ACA passive monitoring.) The 780B Video Generator/Analyzer is a
More informationHD Mini Pattern Signal Generator GTV-HD-MPSG User Manual
HD Mini Pattern Signal Generator GTV-HD-MPSG User Manual www.gefentv.com ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00
More information780A Handheld Test Instrument. 780A HANDHELD TEST INSTRUMENT Now you can test 4K Ultra HD HDMI /60Hz
780A HANDHELD TEST INSTRUMENT Now you can test 4K Ultra HD HDMI 2.0 devices @ 50/60Hz (Note: Above image shown with optional 4-port board to support ACA passive monitoring.) The 780A Handheld Test Instrument
More informationSERVICE MANUAL. 17 LCD Monitor LAW982-1
SERVICE MANUAL 17 LCD Monitor LAW982-1 THESE DOCUMENTS ARE FOR REPAIR SERVICE INFORMATION ONLY. EVERY REASONABLE EFFORT HAS BEEN MADE TO ENSURE THE ACCURACY OF THIS MANUAL; WE CANNOT GUARANTEE THE ACCURACY
More informationVG2235m :10 Multimedia Ergonomic Display. Overview. See More, Work More with a 16:10 Aspect Ratio Display
VG2235m 22 16:10 Multimedia Ergonomic Display 22 16:10 Multimedia Ergonomic Display Overview ViewSonic s VG2235m is a fully ergonomic 22 multimedia display that features 1680 x 1050 resolution, 16:10 aspect
More informationXI100XE HD Capture Adapter User s Guide
XI100XE HD Capture Adapter User s Guide Rev 1.0 2011/11/03 http://www.magewell.com Content 1 Preface... 1 2 Minimum Hardware Configuration... 1 3 Recommended Hardware Configuration... 1 4 System Requirements...
More informationKRAMER ELECTRONICS LTD. USER GUIDE. Control Software for VP-728, VP-729, VP-730, VP-731. P/N: Rev 1
KRAMER ELECTRONICS LTD. USER GUIDE Control Software for VP-728, VP-729, VP-730, VP-731 P/N: 2900-300091 Rev 1 Contents 1 Introduction 1 2 Installing the Control Software 2 2.1 Connecting the PC 5 3 Defining
More informationD-ILA Projector. DLA-Z1 Series DLA-RS4500 Series. External Command Communication Specification
D-ILA Projector DLA-Z1 Series DLA-RS4500 Series External Command Communication Specification Ver. 1.0 13/Jan/2017 JVCKENWOOD Corp. Projector Division (*)D-ILA is the trademark of JVCKENWOOD Corp. Document
More informationUser Manual AC-MXMV122-UHD
User Manual AC-MXMV122-UHD Multi-format Seamless 4 x 2 Matrix with 4K Quad Split and PIP Tel:877-866-5112 Fax:877-303-6944 Introduction The AC-MXMV122-UHD is a sophisticated HD/ UHD Quad Multi-view Video
More information