LEADER RUBBER COMPANY SOUTH AFRICA (PTY) LTD CONSUMABLES

Size: px
Start display at page:

Download "LEADER RUBBER COMPANY SOUTH AFRICA (PTY) LTD CONSUMABLES"

Transcription

1 LEADER RUBBER COMPANY SOUTH AFRICA (PTY) LTD CONSUMABLES

2 INDEX Couplers, Adaptors, Fittings and O Rings Knives, Blades & Handles Mounted Stones Markers Carbide Cutters Flat Face Rasps Cup & Sleeve Rasps Pencil Rasps & Gouges Brushes Tools & Other Accessories Solutions, Solvents & Lubricants Buffing Tools Chamber Accessories Recording Pens & Charts Envelope / Innerlopes / Curing Tubes / Curing Flaps & Quick Seal Rings 0 Extruder Guns, Staple Guns, Staples, Grinders & Adaptors Wicking & Polydrop Patches - Heat Cure XPly Patches - Heat Cure Radial Truck Patches - Chemical Cure XPly Patches - Chemical Cure Radial Truck Patches - Sectional Cure Radial Truck OTR Patches - Heat Cure Radial OTR Patches - Sectional Cure XPly OTR Patches - Sectional Cure Radial Mushroom plugs and tube patches Envelope Patches Unicure Repair System 8 8 9

3 9 0 Couplers, Adaptors, Fittings and O Rings 000 Coupler (CB0) B Air Coupler 000 Coupler (CB0) ¼ Vacuum Female Coupler 00 Coupler (CB) Bandag Coupler 000 Adaptor (CA0C) Fits B Coupler 000 Adaptor (CA0C) Fits B Coupler 000 Adaptor (CA0C) Fits B Coupler 0008 Adaptor (CA08C) Fits B Coupler Adaptor UNF x /8 BITO 9 0 Adaptor (CB) ¼ Male Vacuum 0 0 Adaptor (CB) Male Envelope (Bandag) 0 Fitting (CM¼) Tail Pieces (Air) ¼ 0 O Ring (CK) Thick 0 O Ring (CK) Thin 0 Seal High Temp Viton Knives, Blades & Handles 0000 Knife (CXK) Dexter Square Point x 0000 Knife (CXK) Dexter Square Point 8 x 000 Knife (CXT) Taper Point ¼ Knife Blade (CXK8) Dexter ¼ 000 Blade: Triing (BK) Single 000 Blade: Rotary Tread Cutter 0000 Knife Handle (CXK) Dexter 8D Blade: Flexible (Round)

4 Mounted Stones 0000 Mounted Stone (A) Ruby 000 Mounted Stone (A00) Small Cone 000 Mounted Stone (A00) Large Cone 00 Mounted Stone (A0) Small 00 Mounted Stone (A0) Large 00 Mounted Stone (A0) Pencil 00 Mounted Stone (A0) Markers 0000 Markers (C9W00) White 0/box 0000 Markers (C9Y00) Yellow 0/box 0000 Markers (C9R00) Red 0/box 0000 Markers (C9B00) Blue 0/box

5 Carbide Cutters 009 Carbide (A9BR) Ext Point / x x 000 Carbide (A0BR) Long Pencil /8 x x () 00 Carbide (A0BRP) Ext Point x 0 Carbide (ABR) Ext Point / x 00 (8) 0 Carbide (A/8BR) Ext Point x 00 (/) 0 Carbide (ALGB) Ext Point x 08 Carbide (A8BR) Flat Head /8 x ½ 8 08 Carbide (A8FTB) Flat Router ¼ x ¼ x ½ Fine 9 08 Carbide (A8FTB) Flat Router ¼ x ¼ x ½ Course 0 08 Carbide (A8BLBR) Round Ball ½ x ¼ x ½ 8 Flat Face Rasps 080 Rasp (A-0) Flat Face 0 x ( Grit) 080 Rasp (A-0) Flat Face 0 x ( Grit) 080 Rasp (A-0) Flat Face 0 x 0 ( Grit) 080 Rasp (A-0) Flat Face 0 x 0 ( Grit) 080 Rasp (AR0) Round Face 0 x ( Grit) 0808 Rasp (AR08) Round Face 0 x ( Grit) 0809 Rasp (AR09) Round Face 0 x 9 ( Grit) Rasp (AR0) Round Face 0 x 9 ( Grit)

6 0 Cup & Sleeve Rasps 0800 Rasp (CN) Flat Disc Sidewall Finish 080 Rasp (A0/) Contour Cup 0 x ( Grit) 080 Rasp (A0/) Contour Cup 0 x ( Grit) 08 Rasp (A/) Contour Cup 0 x 0 ( Grit) 08 Rasp (A/) Contour Cup 0 x 0 ( Grit) 08 Rasp (A/) Contour Cup x 0 ( grit) 08 Rasp (A/) Contour Cup x 0 ( Grit) 8 08 Rasp (A/) Contour Cup 0 x 8 ( Grit) 9 08 Rasp (A/) Contour Cup 0 x 8 ( Grit) 0 08 Rasp Sleeve x ( Grit) 08 Rasp Sleeve x ( Grit) 08 Rasp Sleeve x ( Grit) 9 8 Pencil Rasps & Gougers 08 Rasp (AC) Bullnose 9 x 0 ( Grit) 08 Rasp (AC) Bullnose 9 x 0 ( Grit) 08 Rasp (AP) Pencil x ( Grit) 088 Rasp (AP8) Pencil x ( Grit) 08 Rasp (AC) Cone 9 x ( Grit) 08 Rasp (AC) Cone 9 x ( Grit) 0800 Gouger Rotary Gouger Rotary ¾ 9 08 Gouger Mini Rotary ¼

7 Brushes 080 Brush - Wire (Fine) 080 Brush - Wire (Course) 0800 Brush - Wire Encapsulated 0800 Brush - Wire Encapsulated 080 Brush - Solution (Import) 080 Brush - Solution (Local) 0800 Brush - Solution 0 (Import) Brush - Solution 0 (Local) Tools & Other Accessories Awl (CAWL) Probe No 000 Stitcher (CST) (¼ ) 000 Stitcher (CST) Spike Roller 000 Flat Roller (CA) 00 File (AJD) Reaper No 0000 Scraper (CXS) Inner Liner

8 9 Solutions, Solvents & Lubricants 090 Solvent (L0) Buffit L 0900 Cement (L00) Special Chemical L 0900 Cement (L00) Special Blue Chemical L 0900 Lubricant (L00) Silicon L 090 Lubricant (L0) Envelope L 090 Lubricant (L0) Soft Soap 0Kg 090 Tyre Paint (L0) Water L Tyre Paint (L0) Water L Black Vulc Cement L

9 9 8 Buffing Tools 000 Buffing Blade (B9D) R Pin / Pin Buffing Blade (B9DA) R Pin Buffing Blade (B0D) R Pin Buffing Blade (BLL) R Short Pin 8 00 Buffing Blade (R-) R Short Pin Buffing Rasp (BG) Blades G Refill /set 0800 Buffing Tac (ATROX) Rasp 0X Buffing Rasp (AHOX) Hub Unit 0X 9 00 Spacer B&J R ¼ Hole Aluminium 0 0 Spacer B&J R /8 Hole Aluminium 00 Spacer B&J R ¼ 8 Hole Aluminium 0 Spacer B&J R /8 8 Hole Aluminium 0 Saturn Aluminium /8 Spacer 00 Saturn Aluminium ¼ Spacer 08 Long Life Spacer LL III /8 0 Long Life Spacer LL III ¼ 8

10 Chamber Accessories Hoses (C) Air Pushlock ¼ (Per Meter) Hoses (C) Teflon m with Fittings Hoses (C) Teflon 00 with Fittings 8 Hoses (C8) Teflon 00 with Fittings 0 Hoses (C0) Teflon ½ x.cm complete with BSP 00 Door Seal (C00) Cyclotherm (Per Meter) 00 Door Seal (SAR00) Sarec (Per Meter) 8 00 Door Seal (PVD00) PVD (Per Meter) 9 00 Door Seal (BAN00) Bandag (Per Meter) 9 8 Recording Pens & Charts 8 Pens - Recording (Blue) - UDB0-Q Pens - Recording (Red) - UDRO-Q 00 Pens - Recording (Blue) 00 Pens - Recording (Green) 00 Pens - Recording (Red) 00 Pens - Recording (Red) /Pkt - UDRO-Q 00 Pens - Recording (Blue) /Pkt - UDBO-Q Charts (Z9D99T) Recording 9 00 Charts (Z9D8T) Recording 0 00 Charts - Recording AC / Hr (00/Pkt) 0 Charts - Recording AF / Hr (00/Pkt) 00 Charts - Recording C (0/Pkt) 9

11 Envelopes / Innerlopes / Curing Tubes / Curing Flaps / Quick Seal Rings 00 Envelope Short Skirt LRC 0 x (--) 0 Envelope Short Skirt LRC 900 x 0 (0--0) 0 Envelope Short Skirt LRC 000 x 0 (--) 0 Envelope Short Skirt LRC 00R0/R. (--) 00 Envelope Long Skirt LRC 8 x (--) 0 Envelope Long Skirt LRC 8/0R/9. (--) 0 Envelope Long Skirt LRC /80R/R. (--) 8 0 Envelope Long Skirt LRC /80R/R. Arc (--8) 9 0 Innerlope LRC Curing Tubes LRC 0 x 000 Curing Tubes LRC 8 x 000 Curing Tubes LRC 8 x 0 00 Curing Tubes LRC 900/000 x 0 00 Curing Tubes LRC 000/00 x 0/ 00 Curing Tubes LRC 00/0/R. 000 Curing Flap Heat Resistant 000 Curing Flap 0 Heat Resistant Curing Flap. x 9 Heat Resistant 9 00 Curing Flap. x Heat Resistant Quick Seal Rings. 000 Quick Seal Rings Quick Seal Rings. 000 Quick Seal Rubber Band Arc. 0

12 Extruder Guns, Staple Guns, Staples, Grinders & Adaptors 00 Extruder Gun Mini 00 Extruder Gun Magnum 00 Extruder Gun Nozzle 00 Extruder Gun Element 8 00 Extruder Gun Thermostat 00 Extruder Gun Front Body 009 Extruder Gun Element Staple Gun Omer 0/ Staple Gun Omer 8P Plastic Staples Prima /0 (000/Box) 9000 Staples Series 8 (000/Box) 900 Staples Series 0 (000/Box) 9000 Staples 8 Series 0 (800/Box) 9000 Staples (Plastic) Omer 8P (00/Box) 0009 Grinder (G009) Hi Speed 000 Grinder (G00) Low Speed 00 Grinder - Air Angle Air Tool (G00) Pistol Grip 9 00 Adaptor (G0) MA - Short 0 00 Adaptor (G0) MA - Long 08 Adaptor (A-8) Jacobs Chuck

13 Wicking & Polyprop 0000 Wicking 00 x 0 0/Pkt 0009 Wicking No 9 0 x 0 0/Pkt 00 Wicking No 0 x 0 0/Pkt 000 Wicking 08 x 0 (8 x 0 ) /Box 0 Wicking - Rubber 0 Polyprop Perforated 0 0 Polyprop Perforated 0 8 Polyprop Perforated 9 0 Polyprop Perforated Polyprop Perforated Patches - Heat Cure X Ply 00 Patch Nail Hole 00/Box 00 Patch Nail Hole 0 00/Box 00 Patch Nail Hole 90 00/Box 00 Patch Nail Hole 0 00/Box 0 Patch No 0 Heat Cure X Ply 8 x 8 0/Box 0 Patch No 0 Heat Cure X Ply 0 x 0 0/Box 0 Patch No 0 Heat Cure X Ply 0 x 0 0/Box 8 0 Patch No 0 Heat Cure X Ply 0 x 0 0/Box 9 0 Patch No 0 Heat Cure X Ply x 0/Box 0 0 Patch No 0 Heat Cure X Ply x 0/Box 0 Patch No 0 Heat Cure X Ply x 0/Box 08 Patch No 08 Heat Cure X Ply x 0/Box 09 Patch No 09 Heat Cure X Ply 80 x 80 0/Box

14 Patches - Heat Cure Radial Truck 0 Patch No 0 Heat Cure Radial 0 x 0 0/Box Patch No Heat Cure Radial 0 x 00 0/Box Patch No Heat Cure Radial x 0/Box 0 Patch No 0 Heat Cure Radial x 00 0/Box Patch No Heat Cure Radial 80 x 0 0/Box 0 Patch No 0 Heat Cure Radial x 00 0/Box Patch No Heat Cure Radial 0 x 0 0/Box 8 Patch No Heat Cure Radial 0 x 0/Box 9 Patch No Heat Cure Radial x 90 0/Box Patches - Chemical Cure X Ply 00 Patch No 0 Chemical Cure Xply 80. 0/Box (LRC) 00 Patch No 0 Chemical Cure Xply 00 0/Box (LRC) 00 Patch No 0 Chemical Cure Xply 0 0/Box (LRC) 00 Patch No 0 Chemical Cure Xply 0 0/Box (LRC) 00 Patch No 0 Chemical Cure Xply 0/Box (LRC)

15 Patches - Chemical Cure Radial Truck 0 Patch No 0 Chemical Cure Radial 8 x 0/Box (LRC) Patch No Chemical Cure Radial 8 x 8 0/Box (LRC) 0 Patch No 0 Chemical Cure Radial x 0 /Box (LRC) Patch No Chemical Cure Radial x /Box (LRC) Patch No Chemical Cure Radial x /Box (LRC) Patches - Sectional Cure Radial Truck Patch No Sectional Cure Radial x 00 0/Box Patch No Sectional Cure Radial x 0/Box Patch No Sectional Cure Radial 80 x 0 0/Box 0 Patch No 0 Sectional Cure Radial x 00 0/Box Patch No Sectional Cure Radial 0 x 0 0/Box Patch No Sectional Cure Radial x 0/Box

16 OTR Patches - Heat Cure - Radial 90 Patch OTR No 0 Heat Cure Radial 00 x 00 9 Patch OTR No Heat Cure Radial 0 x 9 Patch OTR No Heat Cure Radial x 9 Patch OTR No Heat Cure Radial 00 x 0 98 Patch OTR No 8 Heat Cure Radial 0 x 0 90 Patch OTR No 0 Heat Cure Radial 9 x 90 9 Patch OTR No Heat Cure Radial 80 x Patch OTR No Heat Cure Radial 80 x Patch OTR No Heat Cure Radial 0 x Patch OTR No 8 Heat Cure Radial 0 x 0 90 Patch OTR No 0 Heat Cure Radial 80 x 0 9 Patch OTR No Heat Cure Radial 00 x 9 Patch OTR No Heat Cure Radial 0 x 0 9 Patch OTR No Heat Cure Radial 0 x Patch OTR No 8 Heat Cure Radial 00 x 0 9 Patch OTR No Heat Cure Radial 0 x 980 Patch OTR No 80 Heat Cure Radial 8 x Patch OTR No 8 Heat Cure Radial 0 x Patch OTR No 8 Heat Cure Radial 80 x Patch OTR No 8 Heat Cure Radial 0 x Patch OTR No 90 Heat Cure Radial 0 x 0 99 Patch OTR No 9 Heat Cure Radial 00 x Patch OTR No 9 Heat Cure Radial x 0 99 Patch OTR No 9 Heat Cure Radial 0 x 0

17 OTR Patches - Heat Cure X Ply 90 Patch OTR No 0 Heat Cure X Ply 0 x 0 90 Patch OTR No 0 Heat Cure X Ply 90 x Patch OTR No 0 Heat Cure X Ply 00 x Patch OTR No 08 Heat Cure X Ply 0 x 0 90 Patch OTR No 0 Heat Cure X Ply 00 x 00 9 Patch OTR No Heat Cure X Ply 0 x 0 9 Patch OTR No Heat Cure X Ply 00 x Patch OTR No Heat Cure X Ply 0 x Patch OTR No 8 Heat Cure X Ply 00 x Patch OTR No 0 Heat Cure X Ply 0 x 0 OTR Patches - Sectional Cure X Ply 90 Patch OTR No 0 Sectional Cure X Ply 0 x 0 90 Patch OTR No 0 Sectional Cure X Ply 90 x Patch OTR No 0 Sectional Cure X Ply 00 x Patch OTR No 08 Sectional Cure X Ply 0 x 0 90 Patch OTR No 0 Sectional Cure X Ply 00 x 00 9 Patch OTR No Sectional Cure X Ply 0 x 0 9 Patch OTR No Sectional Cure X Ply 00 x Patch OTR No Sectional Cure X Ply 0 x Patch OTR No 8 Sectional Cure X Ply 00 x Patch OTR No 0 Sectional Cure X Ply 0 x 0 9 Patch OTR No Sectional Cure X Ply 0 x 0

18 OTR Patches - Sectional Cure Radial 90 Patch OTR No 0 Sectional Cure Radial 00 x 00 9 Patch OTR No Sectional Cure Radial 0 x 9 Patch OTR No Sectional Cure Radial x 9 Patch OTR No Sectional Cure Radial 00 x 0 98 Patch OTR No 8 Sectional Cure Radial 80 x 0 90 Patch OTR No 0 Sectional Cure Radial 90 x 9 9 Patch OTR No Sectional Cure Radial 0 x Patch OTR No Sectional Cure Radial 80 x Patch OTR No Sectional Cure Radial 0 x Patch OTR No 8 Sectional Cure Radial 0 x 0 90 Patch OTR No 0 Sectional Cure Radial 80 x 0 9 Patch OTR No Sectional Cure Radial 00 x 9 Patch OTR No Sectional Cure Radial 0 x 0 9 Patch OTR No Sectional Cure Radial 80 x 0 98 Patch OTR No 8 Sectional Cure Radial 00 x 00 9 Patch OTR No Sectional Cure Radial 0 x 980 Patch OTR No 80 Sectional Cure Radial 8 x Patch OTR No 8 Sectional Cure Radial 0 x Patch OTR No 8 Sectional Cure Radial 80 x Patch OTR No 8 Sectional Cure Radial 0 x Patch OTR No 90 Sectional Cure Radial 0 x 0 99 Patch OTR No 9 Sectional Cure Radial 00 x 0 99 Patch OTR No 9 Sectional Cure Radial x 0 99 Patch OTR No 9 Sectional Cure Radial 0 x 0

19 Mushroom Plugs & Tube Patches 00 Patch LRC Mushroom Plugs - (/Box) 009 Patch LRC Mushroom Plugs - 9 (/Box) 008 Patch - Stem 8 (0/Box) 800 Patch No 0 LRC Tube Patch 8 (/Box) 800 Patch No 0 LRC Tube Patch (0/Box) 800 Patch No 0 LRC Tube Patch (/Box) 800 Patch No 0 LRC Tube Patch 9 (0/Box) Envelope Patches 80 Patch - Envelope 0 (00/Pkt) 80 Patch - Envelope 0 (0/Pkt) 8

20 8 Unicure Repair System 00 Unicure Dual Control Box 00 Unicure Heat Pad 0 x 0 00 Unicure Heat Pad 0 x 0 00 Unicure Heat Pad 0 x 0 00 Unicure Heat Pad 0 x 0 00 Unicure Heat Pad 0 x 0 0 Unicure Heat Pad 0 x Unicure Airbags 0 x Unicure Airbags 0 x Unicure Airbags 00 x 00 0 Unicure Airbags 0 x 0 0 Unicure Airbags 800 x Unicure Cylinder Airbags 0 x 0 Unicure Cylinder Airbags 00 x 00 0 Unicure Airbag Cover 0 x 0 00 Unicure Harness 0 x 0 00 Unicure Harness 00 x Unicure Harness 800 x Unicure Curing Fabric 00 x Unicure Curing Fabric 00 x Unicure Curing Fabric 0 x 0 0 Unicure Curing Fabric 800 x Unicure Sandbags 0 x 0 00 Unicure Sandbags 00 x 00 9

21 APPLICATION CHART TYRE SIZE TRUCK - RADIAL PATCH SIZE SIDEWALL CROWN SHOULDER W MM L W/dia x L () Diameter () x 0 0 x 0 8 9R-R 0 0 x 80 0 x 0 / x 0 0 x 0 x 80 0 x 0 0 x 80 0 x x x 8 x 8 R-R 0 0 x 0 x 0 0 /-/ 0 x 9/- 0 x 00 8/ x 80 0 x 0 0 x 80 x x 0 TYRE SIZE LIGHT TRUCK - RADIAL PATCH SIZE SIDEWALL CROWN SHOULDER WxL () W/dia x L () Diameter () x 0 0 x 0 8 R-8.R x 0 x 0 0/-/ 0 x 0 SPEED RATING PATCH SIZE PASSENGER SIDEWALL CROWN SHOULDER WxL () W/dia x L () Diameter () Q 0 x 0 x x 0 x 0 S/T 0 x 8 x 8 x 0 x H 0 x x V 0 x x Z 0 x MAX TRUCK - XPLY CROWN + SIDEWALL PLY -8 PLY 0- PLY - PLY 8-0 PLY - PLY NAIL HOLE NO. INJURY DIAMETER NH NH NH NH 0 NH NH 80 MUSHROOM PLUG/STEM SIZE MIN INJURY MAX INJURY

22 EARTHMOVER REPAIR APPLICATION CHART TYRE SIZE 00 x 00 x. x 00 x. x 0. x 800 x. x. x 9. x 9 00 x 800 x 800 x / / x. 00 x. x 00 x RADIAL REPAIRS - SIDEWALL & SHOULDER PLY RATING SIDEWALL MAX. LENGTH & WIDTH 0 x 00 x 0 0 x 0 x 0 0 x 0 0 x 0 00 x 0 00 x 0 0 x 0 0 x 0 00 x 0 00 x 80 0 x 0 0 x 80 0 x x 0 00 x x 0 80 x 0 0 x 0 SHOULDER PATCH NO / / 8 00 x x x 00 x 00 x 000 x x 0 00 x 80 0 x 0 0 x x 0 00 x x x 0 80 x x x 0 0 x x 80 0 x x RADIAL REPAIRS - CROWN TYRE SIZE 00 x 00 x. x 00 x. x 0. x 800 x. x. x 9. x 9 00 x 800 x 800 x / / x. 00 x. x 00 x / / 00 x 9 CROWN MAX. LENGTH & WIDTH 0 x 0 0 x 0 80 x 0 00 x 80 PATCH NO x x 0 00 x 80 0 x x 0 0 x 80 0 x 00 0 x 00 0 x 00 0 x 80 0 x 00 0 x 00 0 x 0 0 x x 0 x 0 00 x 00 x 000 x 0 x x INJURY SIZE - Ply -8 Ply 0- Ply - Ply 8-0 Ply - Ply -8 Ply 0- Ply 8 Plus Ply NAIL HOLE 0 X-PLY REPAIRS PATCH SIZE - RADIAL 0 00 x 00 0 x 0 0 x 0 x 80 x 8 00 x 0 00 x x x x 90 0 x x 0 80 x x 0 0 x x x x x 0 9 x 0 00 x 9 0 x 0

Office and School supplies

Office and School supplies Office and School supplies Art sets page 02-03 Badge name page 04 Calculators page 05-08 Erasers for blackboards page 09 Carbon paper page 10 Folders page 11 Glues page 12 Covers page 13-14 Correctors

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E478 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2004 5 30 (E1) 1 2 3 4 5 6 23 24 7 8 9 10 25 26 17 18 27 28 29 30 31 32 33 34 11 35 12 36 13 14 37 38 15 16 19 20 21 22 54 55

More information

Micrometers / Micrometer heads

Micrometers / Micrometer heads Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275

More information

"B" COLLETS SOYER COLLETS

B COLLETS SOYER COLLETS STUD DIA. 3 mm CDB-003M 14 Ga CDB-008 12 Ga & #4 CDB-010 1/8 Ga & #5 CDB-012 10 Ga & #6 CDB-013 4 mm CDB-004M #8 CDB-015 #10 & 5 mm CDB-018 6 mm CDB-006M.215" CDB-021 1/4" CDB-025 5/16" & 8 mm CDB-031

More information

LIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1

LIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1 Model ROTARY HAMMER LIST F409 (E1) 2009 9 7 22% TU01658 DH28PD Rev.1 113 1 2 3 4 5 6 7 8 9 10 11 14 15 16 20 21 17 18 22 23 24 25 29 27 30 31 19 32 33 34 35 36 37 38 62 63 64 67 68 69 65 66 70 71 72 73

More information

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability

More information

dia. grit type R type S eblend surface conditioning disc

dia. grit type R type S eblend surface conditioning disc QUICK CHANGE Discs blend Mini E Quick Change Flap Discs The Mini E flap discs are manufactured using the best zirconia abrasive on a heavy cloth backing. Mini E discs features a quick change system using

More information

Grease Guns PRELIxx and PRELIxx PRO

Grease Guns PRELIxx and PRELIxx PRO Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical

More information

Service Items. Page 1. Our #: Description: Rags 1 roll (app. 500 paper towels) Our #: Description: 4L60E TCC orifice capsule

Service Items. Page 1. Our #: Description: Rags 1 roll (app. 500 paper towels) Our #: Description: 4L60E TCC orifice capsule Our #: 096-004 Description: 4L60E TCC orifice capsule Our #: 096-005 Description: Rags 1 roll (app. 500 paper towels) Our #: 096-007 Description: TH200 to TH350 changeover extension housing aviliable in

More information

3M Industrial Products Accessories for Abrasive Products Edition. Accessories. Surface Modification. for

3M Industrial Products Accessories for Abrasive Products Edition. Accessories. Surface Modification. for 3M Industrial Products Accessories for Abrasive Products 204 Edition Accessories for Surface Modification For More Information... For more information on our Accessories offering, visit 3M.com/AccessoriesASD

More information

LUMOTAST FK. General data. Content. Pushbuttons 1-9

LUMOTAST FK. General data. Content. Pushbuttons 1-9 General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet

More information

AT-QC SF / 150 pcs AT-QC SF / 150 pcs AT-QC SF / 150 pcs

AT-QC SF / 150 pcs AT-QC SF / 150 pcs AT-QC SF / 150 pcs QUICK COUPLER ONE TOUCH SF Double knurling to avoid slip AT-QC07 0 SF 7 8 86 / 0 pcs AT-QC07 0 SF 7 0 89 / 0 pcs AT-QC076 0 SF 7 99 / 0 pcs QUICK COUPLER ONE TOUCH SH Double knurling to avoid slip AT-QC077

More information

Snap locks and door locks

Snap locks and door locks TopLine Cabinets - type A The modern design of the TopLine cabinets creates a visual calmness in the department. Behind the calm exterior you will find a highly functional diverse interior with endless

More information

*MORRBA418* *MORRBA424* *MORRBA432*

*MORRBA418* *MORRBA424* *MORRBA432* Sawzall Part #: CRSSB1 MORRB418 4 18tpi Metal Reciprocating Saw Blade 5 blades *MORRB418* MORRB424 4 24tpi Reciprocating Saw Blade.035 Thick Metal *MORRB424* MORRBA418 4 18tpi Air Saw Blade 418T.025 Thick

More information

KEPLERO MINI HE Efficiency & Interchangeability

KEPLERO MINI HE Efficiency & Interchangeability KEPLERO MINI HE Efficiency & Interchangeability Professional Inground LED Fixture Concept: Compact high performance inground single source COB LED fixture with 3 different fixed optic beam options and

More information

LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, ring nut fixing LUMOTAST 25 keylock switch 1-30 LUMOTAST 25 keylock switch 1-31

LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, ring nut fixing LUMOTAST 25 keylock switch 1-30 LUMOTAST 25 keylock switch 1-31 TAST General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp

More information

Dia Lens Finishing Products & Accessories. The best solutions for your finishing laboratory. solutions

Dia Lens Finishing Products & Accessories. The best solutions for your finishing laboratory. solutions Dia Lens Finishing Products & Accessories The best solutions for your finishing laboratory solutions For simple and precise rimless drill mounts DigiDrillDM-50 Rimless Lens Drill The best solution for

More information

Diamond core drills for wet and dry drilling

Diamond core drills for wet and dry drilling DIAMOND CORE DRILLS, WET AND DRY DRILLING Diamond core drills for wet and dry drilling Technical data DIA 50 W* DIA 100 W DIA 150 W Rated power (watts) 1800 1800 Applications Base materials Drilling holes

More information

1220 Self-Contained Carpet Extractor

1220 Self-Contained Carpet Extractor 0 Self-Contained Carpet Extractor Operator and Parts Manual TENNANT COMPANY Commercial Products RANSOM STREET HOLLAND MI U.S.A. FAX: 00 0 CUSTOMER SERVICE: 00-00 Rev. 00 (-) ELECTRICAL DIAGRAMS Tennant

More information

TOOLS AND ACCESSORIES FOR USE WITH CLEANROOM VACUUM CLEANER SYSTEMS LIST

TOOLS AND ACCESSORIES FOR USE WITH CLEANROOM VACUUM CLEANER SYSTEMS LIST OPTIONAL Ø1.25" (Ø32mm) TOOLS AND ACCESSORIES - FOR USE WITH CLEANROOM 323331 WANDS 1.25"(32mm) STAINLESS (SET OF 2) - ONE CURVED AND ONE STRAIGHT 323330 EXTENSION WANDS, BOTH STRAIGHT, (SET OF 2), Ø1.25"(32mm)

More information

For price requests and technical information please contact us:

For price requests and technical information please contact us: For price requests and technical information please contact us: Phone: +49 (0) 9321 / 38308 0 Fax: +49 (0) 9321 / 38308 69 E-Mail: sales@abrasiveplant-technology.com PRODUCT LIST: Spare and wear parts

More information

PARTS BOOKLET

PARTS BOOKLET 00-0-0-0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. JACK & TONGUE. VIEWING PLATFORM. TWO SPEED -. SHIFTERS. OIL RESERVOIR -. PLANETARY 0-. DRIVELINE CONFIGURATIONS -. SLIP CLUTCH PAGES.

More information

RATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE

RATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting

More information

Assembly and Maintenance

Assembly and Maintenance Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines

More information

Chapter 5 SHELF STOPPER

Chapter 5 SHELF STOPPER Chapter 5 SHELF STOPPER Perforated labels clamp page 70 Super gripper T page 72 Fla g s page 74 The promotions, special offers or price reductions must be always announced at the shelf by visible posting

More information

DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.

DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. - s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,

More information

Catalogue. electric-, cordless- and. pneumatic power tools. Products for sheet metal processing Edition 2008 / 2009

Catalogue. electric-, cordless- and. pneumatic power tools. Products for sheet metal processing Edition 2008 / 2009 Catalogue electric-, cordless- and pneumatic power tools Products for sheet metal processing Edition 2008 / 2009 Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Slitting shears

More information

4430 PARTS BOOKLET 2015 EDITION PARTS BREAKDOWNS / INSTALLS PAGE DESCRIPTION 8. OIL RESERVOIR INSTALL

4430 PARTS BOOKLET 2015 EDITION PARTS BREAKDOWNS / INSTALLS PAGE DESCRIPTION 8. OIL RESERVOIR INSTALL 0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. TONGUE & JACK. VIEWING PLATFORM. PILLOW BLOCK BEARING. TWO SPEED -. SHIFTERS. OIL RESERVOIR INSTALL -. DRIVELINE CONFIGURATIONS -. DRIVESHAFTS.

More information

Spares & Consumables Catalogue 2015

Spares & Consumables Catalogue 2015 Reg. No.: 1946/023292/07 (PTY) LTD Spares & Consumables Catalogue 2015 PO Box 101508, Moreleta Plaza, 0167 Tel: 012 993 5797 Fax: 086 550 3785 E-mail: info@intras.co.za www.intras.co.za Description Page

More information

TX-3 TILE SAW OPERATION & PARTS MANUAL

TX-3 TILE SAW OPERATION & PARTS MANUAL www.mkdiamond.com TILE SAW OPERATION & PARTS MANUAL Revision 00 0.09.009 Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all

More information

STANDS Speaker Television. All-Steel Speaker Stand SS7725B (page 82)

STANDS Speaker Television. All-Steel Speaker Stand SS7725B (page 82) STANDS Speaker Television SS8800B+ Power Crank-Up Speaker Stand 80 (page 82) All-Steel Speaker Stand SS7725B 1 2 4 7 1 Cl assic Speaker Stand SS7730B 1 0 6 4 9 Upper Shaft Tubing: 1.375"or 1.5" Upper Shaft

More information

PROline Floor Marking Tape, 50mmW Product description page 3. PROline Floor Marking Tape, 75mmW Product description page 3

PROline Floor Marking Tape, 50mmW Product description page 3. PROline Floor Marking Tape, 75mmW Product description page 3 PROline Floor Marking Tape, 50mmW Product description page 3 33m long, Tape width 50mm white 261.16.606 yellow 261.13.796 blue 261.19.771 red 261.13.752 green 0.5 261.18.249 orange 261.16.322 red/white

More information

Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)

Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI) 411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption

More information

brass compression fittings

brass compression fittings compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT

More information

MAX 13,300 RPM. C3 Ceramic: Z3 Zirconia Alumina: CONTAMINANT-FREE Iron, Sulfur, and Chlorine 0.1%

MAX 13,300 RPM.   C3 Ceramic: Z3 Zirconia Alumina: CONTAMINANT-FREE Iron, Sulfur, and Chlorine 0.1% WHEEL SPECIFICATIONS ANALYSIS OF TYPICAL WHEEL SPECIFICATIONS Analysis of Typical Wheel Specifications MAX 13,300 RPM www.cgwcamel.com CGW Resin Bond Abrasive Types CGW Coated Abrasive Types A Dark Aluminum

More information

TEX 07PE. Spare parts list. Handheld pneumatic pick hammers. Valid from serial number

TEX 07PE. Spare parts list. Handheld pneumatic pick hammers. Valid from serial number TEX 07PE Spare parts list Handheld pneumatic pick hammers TEX 07PE TEX 07PE FSH Valid from serial number 0009 0009 0 Atlas Copco Construction Tools AB No. 9800 08 0a 0005 TEX 07PE Contents Contents General

More information

SPARE PARTS LIST. v.3

SPARE PARTS LIST. v.3 SPARE PARTS LIST v. Parts list chassis Hose connection /8 0 2 Sliding valve Sliding valve Sliding valve 5 Quick coupling female 27 Quick coupling male 7 Barrel nipple /8 29 8 Handle complete see page 9

More information

CAT On-line Parts Catalog

CAT On-line Parts Catalog CAT On-line Parts Catalog Body Parts Page 2-26 Engine & Drivetrain Parts Page 27-36 - 36 Lucas Repair/Replacement Parts Page 37-51 Miscellaneous Parts Page 52-81 Software & Trim Parts Page 82-119 Suspension

More information

1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4

1 5 / 8 7 /8 2 7 /8 75. 3 7 /8 75 Polyurethane HI-TECH Delrin / /16 3/4 For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.

More information

KEPLERO ZOOM Flexibility

KEPLERO ZOOM Flexibility Flexibility Professional Inground LED Fixture Concept: Professional single LED COB fully adjustable landscape inground fixture. As landscaping matures and changes, shape and size zoom optics can be adjusted

More information

Painting & Decorating Tools Range

Painting & Decorating Tools Range Brushes & Rollers Painting & Decorating Tools Range Exclusively Supporting the Independent Sector Marshall Brushes & Rollers Ltd Hargreaves House, Plumbe Street, Burnley BB11 3AB T:+44 (0) 1282 705731

More information

MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:

MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER: MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial

More information

Micromatic 17B PARTS LIST. Advance MODEL This parts list is for machines after serial number /96 revised 8/01 FORM NO.

Micromatic 17B PARTS LIST. Advance MODEL This parts list is for machines after serial number /96 revised 8/01 FORM NO. Micromatic B PARTS LIST Advance MODEL 000 This parts list is for machines after serial number 9/9 revised /0 FORM NO. 0 9-9 00- TABLE OF CONTENTS Micromatic B DESCRIPTION PAGE Chassis System... - Solution

More information

Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly

Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication

More information

3M Stikit Systems. 3M Stikit Disc Cloth General Use. Abrasives. TECH TIP: Stikit Disc Finish Life Characteristics

3M Stikit Systems. 3M Stikit Disc Cloth General Use. Abrasives. TECH TIP: Stikit Disc Finish Life Characteristics 3M Custom Woodworking Catalog 21 3M Stikit Systems Stikit Systems: Versatile, Convenient and Efficient A New Level of Productivity 3M manufactures a complete line of Stikit coated abrasives to handle your

More information

MICROJET IRRIGATION SYSTEMS

MICROJET IRRIGATION SYSTEMS CATALOGUE 01 August 2010 MICROJET IRRIGATION SYSTEMS P.O. Box 279, Eppindust, 7475, South Africa Tel : +27 (0)21 535 1310 Fax : +27 (0)21 535 1166 email : queries@microjet.co.za http://www.microjet.com

More information

2015 Product Catalog. MiJET - Angled 12"diameter model

2015 Product Catalog. MiJET - Angled 12diameter model Deluxe Workstations with Butcher Block surfaces - available with or without solvent container and parts baskets. See image on next page for workstation without solvent container. Part Number MiJET Unit

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 2015 F-150 8 MyTouch factory display 360º Vision System (Kit # AVMS-3618) DUE TO THE COMPLEXITY OF THIS KIT PROFESSIONAL INSTALLATION IS REQUIRED CALIBRATION KIT IS REQUIRED FOR FINAL PROGRAMMING -Must

More information

SURFACE PREPARATION TOOLS 1 PREP-ONE HEAVY GRIND

SURFACE PREPARATION TOOLS 1 PREP-ONE HEAVY GRIND SURFACE PREPARATION TOOLS 1 PREP-ONE HEAVY GRIND Aggressive removal of Coatings Very Long Life on Different Materials PCD-1-R RIGHT 1 WHOLE PCD PCD-1-L LEFT 1 WHOLE PCD PCD-1/4-R RIGHT 2 X 1/4 PCD PCD-1/4-L

More information

MK-MANTA I. Model MK-Manta I Core Drill Owner s Manual Parts List & Operating Instructions. serial number CAUTION

MK-MANTA I. Model MK-Manta I Core Drill Owner s Manual Parts List & Operating Instructions. serial number CAUTION please record the serial number of your drill in this block. serial number For your one (1) year warranty to be effective, complete the warranty card (include the serial number) and mail it in as soon

More information

Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)

Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment) 25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The

More information

MICROJET IRRIGATION SYSTEMS

MICROJET IRRIGATION SYSTEMS CATALOGUE 01 September 2014 MICROJET IRRIGATION SYSTEMS P.O. Box 279, Eppindust, 7475, South Africa Tel : +27 (0)21 535 1310 Fax : +27 (0)21 535 1166 email : info@microjet.co.za http://www.microjet.com

More information

LIST NO. F423 ROTARY HAMMER (E1) Model DH 28PMY

LIST NO. F423 ROTARY HAMMER (E1) Model DH 28PMY Model ROTARY HAMMER LIST F423 2014 4 2 (E1) A A 5 6 7 8 9 17 18 19 20 21 22 23 11 13 14 15 12 24 25 26 27 28 29 30 31 32 33 34 35 36 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

More information

Price Each. Bulk Qty.

Price Each. Bulk Qty. s subject to change without notice DeWALT SDS+ Masonry Bits Item Number Description Each Bulk Each for Bulk DW5348 BULL POINT 10" SDS+ $ 8.95 DW5350 CHISEL 3/4 X 10 SDS+ $ 8.95 DW5401B25 SDS BIT 5/32 X

More information

Cable Marking System. Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:

Cable Marking System. Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA   web: Order from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA email: sales@mdmetric.com web: http://mdmetric.com Cable Marking System phones: (4)358-330 (800)638-830 faxes: (4)358-342 (800)872-9329 60

More information

Hercules GENII Screw mount 2in1 450MHz and 868MHz (Separate cable and connectors)

Hercules GENII Screw mount 2in1 450MHz and 868MHz (Separate cable and connectors) MA12.A.QP.1 on ground-plane Hercules MA12.A.QP.1 Specification Part No. Product Name Feature MA12.A.QP.1 Hercules Hercules GENII Screw mount 2in1 45MHz and 868MHz (Separate cable and connectors) Screw-Mount

More information

Superior Engineering Proven Performance Excellent Finish Less Fatigue

Superior Engineering Proven Performance Excellent Finish Less Fatigue FEATURING Taping & Finishing Tools Built Superior Engineering Proven Performance Excellent Finish Less Fatigue Intex Automatic Flat Boxes Intex Automatic Flat Finisher Boxes - Smooth Operation The exclusive

More information

MIG-A TWIST MIG/MAG WELDING HOSES

MIG-A TWIST MIG/MAG WELDING HOSES MIG-A TWIST MIG/MAG WELDING HOSES MIG-A Twist - new patented welding hose with unprecedented ergonomics and flexibility MIG-A Twist - the new generation of welding hoses The design of MIG-A Twist fits

More information

Call us on

Call us on RAINWATER & PLUMBING 02 Rainwater & Plumbing Half Round 112mm, Rainwater System White, Black, Brown, Grey ½ Rd Gutter 4m R10002 112/68mm 11.95 ½ Rd Fascia R10007 1.00 ½ Rd - C/Iron Ogee Adapter L/H R10983

More information

MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS

MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 202 08.2012 Manual Part# 161117 Caution: Read all safety and operating instructions before using this equipment.

More information

14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page

14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03

More information

1 AM-167/202/242/282/322 Parts Manual. Table Of Contents

1 AM-167/202/242/282/322 Parts Manual. Table Of Contents AM-167/202/242/282/322 Parts Manual Table Of Contents Mower Beam with Bearings...2 Mower Beam with Bearings...4 Cutting Discs...6 Main Gearbox...8 V-Belt Pulley...10 Headstock...12 Carrier Beam...14 V-Belt

More information

ROTARY HAMMER Model DH 26PC

ROTARY HAMMER Model DH 26PC LIST F418 ROTARY HAMMER Model 2013 5 22 (E1) 1 2 18 19 20 3 4 5 6 21 22 7 8 53 23 24 25 26 27 A 28 29 30 31 11 32 12 33 34 13 35 14 36 15 24 37 16 17 9 A 10 54 41 64 65 55 56 57 58 59 60 42 43 44 45 46

More information

REQUEST FOR EXPRESSION OF INTEREST

REQUEST FOR EXPRESSION OF INTEREST FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS FAO REPRESENTATION IN ETHIOPIA AND SUB REGIONAL OFFICE FOR EASTERN AFRICA (SFE) ETHIOPIA, TO THE AFRICAN UNION AND THE UN ECONOMIC COMMISSION FOR

More information

LIST NO. F421 ROTARY HAMMER (E1) Model DH 24PH

LIST NO. F421 ROTARY HAMMER (E1) Model DH 24PH Model ROTARY HAMMER LIST F421 2013 5 22 (E1) A 29 73 1 2 3 4 5 6 7 17 8 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 A 501 502 503 38 39 9 24 17 40 41 42 43 44 45 46 47

More information

The space-saving TOP shutters have a special wrapping roll Ø45 or Ø60, pre-set in accordance to the shutters dimensions.

The space-saving TOP shutters have a special wrapping roll Ø45 or Ø60, pre-set in accordance to the shutters dimensions. The aluminium roller shutter mod. TOP is assembled with profiles H30 or H38, is realized with the required heights in extruded shapes and special characteristics and can be used for the main compartments,

More information

Safety Systems Safety Integrated

Safety Systems Safety Integrated 3SE2 / SE3 Molded plastic /metal enclosure with separate actuator Application Safety interlock switches with separate actuator are used where the position of doors, covers or safety screens must be monitored

More information

UNITED STATES MEXICO CANADA

UNITED STATES MEXICO CANADA www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.

More information

SURFACE PREPARATION TOOLS 1 PREP-ONE HEAVY GRIND

SURFACE PREPARATION TOOLS 1 PREP-ONE HEAVY GRIND SURFACE PREPARATION TOOLS 1 PREP-ONE HEAVY GRIND Aggressive removal of Coatings Very Long Life on Different Materials PCD-1-R RIGHT 1 WHOLE PCD PCD-1-L LEFT 1 WHOLE PCD PCD-1/4-R RIGHT 2 X 1/4 PCD PCD-1/4-L

More information

B 40 W DOSE (Disc brush)

B 40 W DOSE (Disc brush) B 40 W DOSE (Disc brush) Walk-behind scrubber drier (40 l). Configuration example with traction drive, disc brush, 51 cm working width and battery (105 Ah). 1 3 batteries to choose from 3 EASY Operation

More information

Changeable Letter Systems. Zip-Change Flat Letters. Condensed Solid Letters and Numbers. Zip-Change Letter Kits. Features:

Changeable Letter Systems. Zip-Change Flat Letters. Condensed Solid Letters and Numbers. Zip-Change Letter Kits. Features: Changeable Letter Systems Zip-Change Flat Letters Colors - See Color Chart Letter Sizes - 4,6,8,10,12,15,17 and 24 inches Zip-Change Halftone Zip-Change Solid Zip-Change Product color Chart Zip-Change

More information

Safety mats. sensing the future. Electrical surface switches for safe activation and deactivation of machines, devices and automatic doors

Safety mats. sensing the future. Electrical surface switches for safe activation and deactivation of machines, devices and automatic doors sensing the future Electrical surface switches for safe activation and deactivation of machines, devices and automatic doors Reliable, robust, low-maintenance System is simple to install Surface switch

More information

robust advanced technology Accessories » for mobile and stationary Ringler suction systems

robust advanced technology Accessories » for mobile and stationary Ringler suction systems www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection

More information

VINYL CUTTER C IV SERIES

VINYL CUTTER C IV SERIES VINYL CUTTER C IV SERIES EN CIV S E R I E S FEATURES 64 bit DC LITE Mac compatible USB Interface 64 bit compatible Plug & play LAPOS DrawCut LITE Cutting software VINYL CUTTER C IV SERIES Secabo s C IV

More information

13AN77KG011 Pony (2009) Page 1 of 21 Engine Accessories

13AN77KG011 Pony (2009) Page 1 of 21 Engine Accessories 13AN77KG011 Pony (2009) Page 1 of 21 Engine Accessories 13AN77KG011 Pony (2009) Page 2 of 21 Engine Accessories 1 683-04549-0637 1 /P Muffler Shield Assembly with Weld 2 710-0227 1 /P Screw, 8-18 x.500

More information

Redexim-Charterhouse Verti-Drain 7316 pag 01 code 0401

Redexim-Charterhouse Verti-Drain 7316 pag 01 code 0401 Redexim-Charterhouse Verti-Drain 7316 pag 01 code 0401 1 4191100 Winged nut 10 2 4100800 Self lock nut M6 10 3 2282183 Bottom PTO protection cover 1 4 4001030 Bolt M6 x 16 10 5 2281782 Top PTO protection

More information

Switches and Indicators 84

Switches and Indicators 84 Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories

More information

English. Quick Guide

English. Quick Guide English Quick Guide Specification Product Overview Button and Indicator light Unpacking Accessory Checklist Important Safety Notes Extruder module installation Accessory installation XYZware operation

More information

8mm 16mm F $ $ mm 19mm F $ $ mm 25mm F $ $ mm 32mm F $ $135.

8mm 16mm F $ $ mm 19mm F $ $ mm 25mm F $ $ mm 32mm F $ $135. Sheet Metal Part No Galv Sheet 800 x 600 x 0.55mm F106765 $11.50 $9.20 10 Galv Sheet 800 x 600 x 0.75mm F106766 $14.70 $11.70 10 Galv Sheet 800 x 600 x 0.95mm F105143 $24.70 $19.80 10 Aluminium Sheet (H34)

More information

FLEXIMARK Cable Marking Systems

FLEXIMARK Cable Marking Systems Custom Plastic Marking Systems 598 UNITRONIC Bus Cables & Connectors MINI/MAXI Plastic Marking Systems 599 Print-Your-Own Plastic Marking Systems 607 Custom Stainless Steel Marking Systems 610 Stainless

More information

MODELS MR44B & MR44K (See drawings below for additional parts)

MODELS MR44B & MR44K (See drawings below for additional parts) MODELS MRB & MRK (See drawings below for additional parts) 0 Cup Washer $. 00 Wir e Lock Pin,." x.0" $. 00 Screw Pin Shackle Clevi s $. 00 Worm Drive Hose Clamp (-/" to -/" Clamping Dia.) $. 0 Single Split

More information

CATALOGUE OF MATERIALS, TOOLS & ACCESSORIES METRIC (SI)

CATALOGUE OF MATERIALS, TOOLS & ACCESSORIES METRIC (SI) Insulation Second Issue April 2015 See rear cover for applicable countries The Kingspan System CATALOGUE OF MATERIALS, TOOLS & ACCESSORIES METRIC (SI) Low Energy Low Carbon Buildings Introduction What

More information

MIG/MAG WELDING TORCHES & CONSUMABLES

MIG/MAG WELDING TORCHES & CONSUMABLES MIG/MAG WELDING TORCHES & CONSUMABLES TAURUS BZ15 MIG TORCH 4 5 TECHNICAL DATA Cooling Gas Cooled 6 7 Duty cycle 60% 180 Amp CO 2, 150 Amp MIX Wire Size v 0.6-1.0 mm 13 8 12 11 10 9 POSITION CODE REFERENCE

More information

BAGGER V2 PX3 PARTS CATALOG

BAGGER V2 PX3 PARTS CATALOG FOAM TECHNOLOGY Smart BAGGER V2 PX3 PARTS CATALOG VER. 20121107 FIP1001 HEATED JAW TEFLON TAPE 3/8" 5965 FIP1002 CRIMPED CROSS CUT ASSEMBLY FIP1003 CRIMPED CROSS SEAL ASSEMBLY FIP1005 EDGE SEAL ARBOR 2005

More information

the Interactive Catalog

the Interactive Catalog Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE

More information

<?8H; :?I9I 7FFB?97J?EDI C7HA;JI </-' =H;;DBOJ; FBKI <;7JKH;I 8;D;<?JI </-+ =H;;DBOJ; <;7JKH;I 8;D;<?JI 9eWj[Z 7XhWi_l[i

<?8H; :?I9I 7FFB?97J?EDI C7HA;JI </-' =H;;DBOJ; FBKI <;7JKH;I 8;D;<?JI </-+ =H;;DBOJ; <;7JKH;I 8;D;<?JI 9eWj[Z 7XhWi_l[i PLUS PLUS 100 FIBRE DISCS F228 FERR. & NON- FERR. FEATURES Tough versatile aluminium oxide abrasive 0.8mm fibre backing BENEFITS Fast initial cut Ideal for general purpose metal applications MAXIMUM OPERATING

More information

1.1 Functional Description: NO Switch Functional Description: Illumination TECHNICAL DATA AND DIMENSIONAL DRAWINGS...

1.1 Functional Description: NO Switch Functional Description: Illumination TECHNICAL DATA AND DIMENSIONAL DRAWINGS... Product Manual PSE NO Switch CONTENTS CONTENTS... 1 1 PRODUCT DESCRIPTION... 3 1.1 Functional Description: NO Switch... 3 1.2 Functional Description: Illumination... 4 2 TECHNICAL DATA AND DIMENSIONAL

More information

Identification Products

Identification Products D77 Automatic Marking System Compact heavy duty machine for high demand production of wire, cable and component marking PC link connection or stand alone mode with an optional standard keyboard Printing

More information

Rotary DIP SWITCHES. RCO/RCR/RDO-Series

Rotary DIP SWITCHES. RCO/RCR/RDO-Series Rotary DIP SWITCHES RCO/RCR/RDO-Series 2018 Contitec Electronics Ltd. Schatzbogen 33 81829 München/Germany Tel. +49 89 99818630 Fax. +49 89 32195075 Email: sales@ contitec.com RCO- Series Type RCO-2R04T1

More information

50" langston saturn. replacement knives and parts. precision parts. precision manufacturing. 161 Lee Industrial Drive Blairsville, GA 30512

50 langston saturn. replacement knives and parts. precision parts. precision manufacturing. 161 Lee Industrial Drive Blairsville, GA 30512 50" langston saturn replacement knives and parts precision parts. precision manufacturing. 161 Lee Industrial Drive Blairsville, GA 051 800.969.0881 Fax: 706.781.6649 www.corrugatedparts.com sales@corrugatedparts.com

More information

High Speed Steel Drills and Taps - Alpha

High Speed Steel Drills and Taps - Alpha High Speed Steel Drills and Taps - Alpha CODE Price Each Description 6 Pack Code Price TL-9CD4-516 $ 10 34 39p 5 Centre Drill HSS #4 5/16 Diameter TL6-9CD4-516 $ 46 /6 TL-9CD5-716 $ 15 56 70p 9 Centre

More information

Wrought Iron Brochure

Wrought Iron Brochure Wrought Iron Brochure Page 2 Spikes 9211 24mm 125x63mm 9212 26mm 140x70mm 9213 28mm 170x85mm 126/B/6 20mm 80x45mm 126/B/7 25mm 125x64mm 126/B/8 38mm 140x80mm 9543 13mm 133x59mm 9542 14mm 153x70mm 9541

More information

STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...

STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges... STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...

More information

Parts List, Wiring Diagrams

Parts List, Wiring Diagrams Parts List, Wiring Diagrams PAH 210-300 SERIES 3 Phase PACKAGE AIR CONDITIONER UNITS TABLE OF CONTENTS PARTS LIST --------------2-5 PARTS DRAWINGS ------ 6-22 CHARGING CHARTS ---- 23-25 WIRING DIAGRAMS

More information

Electronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers

Electronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers

More information

Jack Plates. Jack Plates & Accessories PREMIER. PT-625B1 Flush Jack. PREMIER PT-625B3 Flush Jack

Jack Plates. Jack Plates & Accessories PREMIER. PT-625B1 Flush Jack. PREMIER PT-625B3 Flush Jack Jack Plates PT-625B1 Flush Jack PT-625B1 Flush Jack Flush jack assembly is designed for flush mounting in a standard outlet box. It includes a 625F modular jack, 19A faceplate, 43A bracket, and mounting

More information

PCB Keyswitches Product Survey Versions Recommended Key grid Illumination Keyswitch Signal indicator Keyswitch height Contacts RACON 8 12 mm Non-illum

PCB Keyswitches Product Survey Versions Recommended Key grid Illumination Keyswitch Signal indicator Keyswitch height Contacts RACON 8 12 mm Non-illum PCB Keyswitches Page RACON short-travel keyswitches - 5 RACON 8-6 RACON 12-10 RACON 12 V with vertical adapter - 1 RACON 12 i - 16 RACON special accessories - 20 RF short-travel keyswitches - 23 RF 15

More information

KING TONY LIST 2014 CODE DESCRIPTION 1/4"DR SOCKET SETS & ACESSORIES

KING TONY LIST 2014 CODE DESCRIPTION 1/4DR SOCKET SETS & ACESSORIES Kingtony List 2014 CODE DESCRIPTION 1/4"DR SOCKET SETS & ACESSORIES 2021MR 1/4" DR SOCKET SET 4-13mm (19PCS) 2540MR 1/4" DR SOCKET SET 4-13mm (39PCS) C/W BITS 223508M 1/4" DR DEEP SOCKET 8mm 223510M 1/4"

More information