MICROJET IRRIGATION SYSTEMS
|
|
|
- Karin Horton
- 6 years ago
- Views:
Transcription
1 CATALOGUE 01 September 2014 MICROJET IRRIGATION SYSTEMS P.O. Box 279, Eppindust, 7475, South Africa Tel : +27 (0) Fax : +27 (0) info@microjet.co.za or
2 MICROJETS PAGE 1 AB STRIP 1000 AB X AB X AB X AB AB AB OPEN 1000 AB X MICROJET CAP, BLACK AB AM MAXI-CAP, BLACK AM BLACK BB mm ( 030") 1000 BLUE BB mm ( 040") 1000 GREEN BB mm ( 050") 1000 RED BB mm ( 060") 1000 MICROJET BASE WHITE BB mm ( 090") 1000 BLACK BB01AB?? PLEASE NOTE : 1000 BLUE BB02AB?? Coding structure 1000 GREEN BB03AB?? for assembled jets : 1000 RED BB04AB?? BASE CODE+CAP CODE 1000 WHITE BB05AB?? (e.g. BB01AB01) 1000 ASSEMBLED MICROJETS - replace question (BLACK CAP) MAXI-CAP BB??AM?? marks with appropriate 1000 code numbers BV mm ( 040") - NO CAP 500 VARIJET BV40AB?? Assembled with cap 500 (?? = cap code) BV40FJ??? Assembled with Framejet 500 (??? = framejet code) MICROJET C-SERIES BLACK BC mm ( 030") 1000 BLUE BC mm ( 040") 1000 GREEN BC mm ( 050") 1000 RED BC mm ( 060") 1000 BLACK FJF mm ( 030") x BLUE FJF mm ( 040") x GREEN FJF mm ( 050") x RED FJF mm ( 060") x WHITE FJF mm ( 090") x BLACK FJH mm ( 030") x BLUE FJH mm ( 040") x GREEN FJH mm ( 050") x RED FJH mm ( 060") x WHITE FJH mm ( 090") x BLACK FJQ mm ( 030") x BLUE FJQ mm ( 040") x GREEN FJQ mm ( 050") x RED FJQ mm ( 050") x MICROJET FRAME-JET WHITE FJQ mm ( 090") x NB: All Jets and Adaptors are available in 100 packs for an additional charge Please use the usual code with -100 behind it (eg: AB01-100)
3 MICROJETS (continued) PAGE 2 MICROJET FRAME JET - DOWNSPRAY 360 BLACK FJD mm ( 030") x BLUE FJD mm ( 040") x GREEN FJD mm ( 050") x RED FJD mm ( 060") x WHITE FJD mm ( 090") x SUNJET (1 PIECE JET) BLACK SJF mm ( 030") x BLUE SJF mm ( 040") x GREEN SJF mm ( 050") x RED SJF mm ( 060") x BLACK SJH mm ( 030") x BLUE SJH mm ( 040") x GREEN SJH mm ( 050") x RED SJH mm ( 060") x BLACK SJQ mm ( 030") x BLUE SJQ mm ( 040") x GREEN SJQ mm ( 050") x RED SJQ mm ( 060") x BLACK BD mm ( 030") 100 ORANGE BD mm ( 035") 100 BLUE BD mm ( 040") 100 GREEN BD mm ( 050") 100 RED BD mm ( 060") 100 MICROSPIN Microspin is also available in a barbed configuration in place of the standard threaded. The codes are the same with a "B" suffix Namely: BD30B, BD35B, BD40B, BD50B and BD60B BD 01 Rotating Cap 500 LIGHTHOUSE JET BE 01 White Base 1000 BALL DRIVE JET BF 01 Mistspray Jet 1000 MICROMIST SPRAY NB: All Jets and Adaptors are available in 100 packs for an additional charge Please use the usual code with -100 behind it (eg: AB01-100)
4 MICROJET ACCESSORIES: Adaptors, etc PAGE 3 RISER ADAPTORS BG 02 Threaded 2BA 1000 TUBE ADAPTORS: BG 04 5mm x 2ba 1000 BG 17 4mm x 2ba 1000 BG 18 4mm x 5mm - Barbed 1000 BH 14 4mm x 4mm - Barbed (Hex) 1000 BH 15 4mm x 4mm - Barbed (Disc) 1000 BH 16 5mm x 5mm - Barbed (Disc) 1000 TEEPIECES BH 24 4mm x 4mm x 4mm 1000 BH 25 5mm x 5mm x 5mm 1000 ADAPTORS & TUBE FITTINGS 4mm JET ADAPTORS (for Stake Assembly) BH 35 REINFORCED (for threaded jets) 1000 BH 38 BLUE HEAD (for pressfit jets) 1000 BG 05 SCREWED 2BA 1000 BLANK PLUGS BG 06 BARBED 1000 BG 01 Plastic Spike 25 MICROJET SPANNER BG 07 Chrome Spike 25 BG 08 for Lighthouse 25 BG 11 for Sunjet 25 MICROJET PUNCH BG 09 Punch 10 RIGID RISER with ADAPTOR BJ mm (Nominal) 1000 BJ mm (Nominal) 1000 BJ mm (Nominal) 1000 BJ mm (Nominal) 1000 Non-Standard lengths available on request BK 61 THREADED 2BA 100 BK 62 THEADED/BARBED 100 BK 63 BARBED 5mm 100 BK 64 BARBED 4mm 100 MICROJET CHOKE NB: All Jets and Adaptors are available in 100 packs for an additional charge Please use the usual code with -100 behind it (eg: AB01-100)
5 MICROJET ACCESSORIES: Stakes & Tubing PAGE 4 STANDARD STAKE (ABS) BS mm 500 BS mm 500 BS mm 500 BS mm 300 POLY STAKE BP mm 500 BP mm 300 POLY SLIMSTAKE BPS 300B 300mm BARB 100 BPS 300C 300mm CLIP 100 BPS 450B 450mm BARB 100 BPS 450C 450mm CLIP 100 BLUE HEAD SLIMSTAKE BBS 300B 300mm BARB (for pressfit) 100 BBS 450B 450mm BARB (for pressfit) 100 STAKEHEAD ONLY BSH100 BARBED - For Aluminium Stake 100 MICROJET STAKE FLEXIBLE TUBE GUIDE BH 40 Only available with SLIMSTAKE 100 Complete Stake Assembly: Stake, 600mm Tube, Barbed Adaptor, Jet: STANDARD STAKE BS3/JET CODE 300mm 100 STANDARD STAKE BS4/JET CODE 450mm 100 POLYSTAKE BP3/JET CODE 300mm 100 POLYSTAKE BP4/JET CODE 450mm 100 POLY SLIMSTAKE BPS3/JET CODE 300mm 100 POLY SLIMSTAKE BPS4/JET CODE 450mm 100 Incomplete Stake Assembly: Stake, 600mm Tube, Barbed Adaptor - No Jet: STANDARD STAKE BSA mm - no jet 100 STANDARD STAKE BSA mm - no jet 100 POLY STAKE BPA mm - no jet 100 POLY STAKE BPA mm - no jet 100 POLY SLIMSTAKE BPSA mm - no jet 100 POLY SLIMSTAKE BPSA mm - no jet 100 BLUE HEAD SLIMSTAKE BBSA mm - no jet (for pressfit) 100 BLUE HEAD SLIMSTAKE BBSA mm - no jet (for pressfit) 100 Potstake Assembly: 150 Stake, 100mm riser, Downspray 360, Barbed Adaptor (no tubing): STANDARD POTSTAKE BS1FJD with Framejet Downspray 100 AJUSTABLE POTSTAKE BS1BVD with Varijet Downspray 100 MICROJET STAKE ASSEMBLY NOTE: All Stake assemblies are supplied standard with black tubing and barbed adaptor. To specify green tubing please use suffix "G" (eg: BSA300G) BHD 100 3mm Drip Tube - BLACK 100m BH 100 4mm - BLACK 100m BH 100G 4mm - GREEN 100m BH 100B 5mm - BROWN 100m CUT LENGTHS BH 60G 4mm GREEN - with adaptor 600mm CUT LENGTHS BH 1000G 4mm GREEN - with adaptor 1m CUT LENGTHS BH 60 4mm BLACK - with adaptor 600mm CUT LENGTHS BH mm BLACK - with adaptor 1m FLEXIBLE PVC TUBE non-standard lengths available on request
6 EMJAY INSERT FITTINGS PAGE 5 GREEN PP BLACK NYLON CODE DESCRIPTION SIZE PACK CODE MBG mm 20 MB 100 MBG mm 20 MB 101 MBG mm 20 MB 102 MBG mm 20 MB 103 MBG mm 20 MB 104 MBG mm 20 MB 200 MBG mm 20 MB 205 MBG mm 10 MB 206 MBG mm - LONG 10 MB 207 MBG 208 CONNECTOR 65mm 10 MB 208 MBG mm 5 MB 209 MBG mm x 10mm 20 MB 105 MBG mm x 10mm 20 MB 106 MBG mm x 13mm 20 MB 107 MBG mm x 10mm 20 MB 108 MBG mm x 13mm 20 MB 109 MBG mm x 15mm 20 MB 110 MBG mm x 15mm 20 MB 111 MBG mm x 20mm 20 MB 112 MBG mm x 15mm 20 MB 223 MBG mm x 20mm 20 MB 224 MBG mm x 25mm 20 MB 225 MBG mm x 15mm 20 MB 226 MBG mm x 20mm 20 MB 227 MBG mm x 25mm 20 MB 228 MBG mm x 32mm 20 MB 229 MBG mm x 15mm 10 MB 231 MBG mm x 20mm 10 MB 232 MBG mm x 25mm 10 MB 233 MBG mm x 32mm 10 MB 234 MBG 235 REDUCER 50mm x 40mm 10 MB 235 MBG mm x 50mm 10 MB 237 MBG mm 20 MB 113 MBG mm 20 MB 115 MBG mm 20 MB 117 MBG mm 20 MB 119 MBG mm 20 MB 120 MBG 325 EQUAL 32mm 20 MB 325 MBG 330 TEEPIECE 40mm 20 MB 330 MBG mm 10 MB 331 MBG mm 10 MB 332 * MBG mm 5 MB 333 * MBG mm x 10mm 20 MB 114 MBG mm x 13mm 20 MB 116 MBG mm x 15mm 20 MB 118 MBG mm x 20mm 20 MB 121 MBG mm x 15mm 20 MB 122 MBG mm x 15mm 20 MB 334 MBG mm x 20mm 20 MB 335 MBG mm x 25mm 20 MB 336 MBG mm x 15mm 20 MB 338 MBG mm x 20mm 20 MB 339 MBG mm x 25mm 20 MB 340 MBG mm x 32mm 20 MB 341 MBG mm x 15mm 10 MB 343 MBG mm x 20mm 10 MB 344 MBG 345 REDUCING 50mm x 25mm 10 MB 345 MBG 346 TEEPIECE 50mm x 32mm 10 MB 346 MBG mm x 40mm 10 MB 347 Effective 01 September 2014
7 EMJAY INSERT FITTINGS PAGE 6 GREEN PP BLACK NYLON CODE DESCRIPTION SIZE PACK CODE MBG mm 20 MB 127 MBG mm 20 MB 128 MBG mm 20 MB 129 MBG mm 20 MB 130 MBG mm 20 MB 131 MBG mm 20 MB 240 MBG 245 ELBOW 40mm 20 MB 245 MBG mm 10 MB 246 MBG mm 10 MB 247 * MBG mm 5 MB 248 * MBG 300 REDUCING ELBOW 15mm x 13mm 20 MB 300 MBG mm 20 MB 136 MBG mm 20 MB 137 MBG mm 20 MB 138 MBG mm 20 MB 139 MBG mm 20 MB 140 MBG mm 20 MB 260 MBG mm 20 MB 261 MBG mm 10 MB 262 MBG 263 END PLUG 65mm 10 MB 263 MBG mm 5 MB 264 MBG /15mm x 1/2" 20 MB 123 MBG mm x 1/2" 20 MB 124 MBG mm x 1/2" 20 MB 125 MBG mm x 3/4" 20 MB 126 MBG mm x 1/2" 20 MB 210 MBG mm x 3/4" 20 MB 212 MBG mm x 1" 20 MB 214 MBG mm x 1/2" 20 MB 215 MBG mm x 3/4" 20 MB 216 MBG mm x 1" 20 MB 217 MBG mm x 1 1/4" 20 MB 218 MBG mm x 1/2" 20 MB 249 MBG mm x 3/4" 20 MB 250 MBG mm x 1" 20 MB 251 MBG mm x 1 1/4" 20 MB 252 MBG mm x 1 1/2" 20 MB 253 MBG mm x 1/2" 10 MB 254 MBG mm x 3/4" 10 MB 255 MBG 256 MALE 50mm x 1" 10 MB 256 MBG 257 COMBINATION 50mm x 1 1/4" 10 MB 257 MBG 258 TEEPIECE 50mm x 1 1/2" 10 MB 258 MBG mm x 2" 10 MB 259 MBG /15mm x 1/2" 20 MB 132 MBG mm x 1/2" 20 MB 133 MBG mm x 1/2" 20 MB 134 MBG mm x 3/4" 20 MB 135 MBG mm x 1/2" 20 MB 280 MBG mm x 3/4" 20 MB 282 MBG mm x 1" 20 MB 284 MBG mm x 1 1/4" 20 MB 286 MBG 289 MALE 40mm x 1 1/2" 20 MB 289 MBG 290 COMBINATION 40mm x 2" 20 MB 290 MBG 291 ELBOW 50mm x 2" 10 MB 291 MBG mm x 1 1/2" 10 MB 292 Effective 01 September 2014
8 EMJAY INSERT FITTINGS PAGE 7 GREEN PP BLACK NYLON CODE DESCRIPTION SIZE PACK CODE MBG mm x 1/2" 20 MB 141 MBG mm x 3/4" 20 MB 265 MBG mm x 1/2" 20 MB 142 MBG mm x 3/4" 20 MB 266 MBG mm x 3/4" 20 MB 143 MBG mm x 1" 20 MB 620 MBG mm x 1" 20 MB 144 MBG mm x 1 1/4" 20 MB 267 MBG mm x 1 1/4" 20 MB 270 MBG mm x 1 1/2" 20 MB 271 MBG mm x 1 1/2" 20 MB 275 MBG 274 P X MI ADAPTOR 40mm x 2" 10 MB 274 MBG mm x 2" 10 MB 276 MBG 571 MALE FEMALE ¾" MNPTxFBSP (20mm) 20 MB 571 ADAPTOR - MNPT/ FBSP N/A 1/2" BSP (15mm) 20 BK 15 N/A 3/4" BSP (20mm) 20 BK 20 N/A NYLON SOCKET 1" BSP (25mm) 20 BK 25 N/A ABS SOCKET 1/2" BSP (15mm) - SHORT 20 BK 50 MBG 575 IMPACT SOCKET (with offset threads) 3/4" - Non Standard 20 N/A MBG mm x 1/2" 20 MB 702 MBG mm x 1/2" 20 MB 703 MBG mm x 3/4" 20 MB 704 MBG mm X 1/2" 20 MB 705 MBG mm X 3/4" 20 MB 706 MBG mm X 1" 20 MB 707 MBG708 32mm x 1/2" 20 MB 708 MBG709 32mm x 3/4" 20 MB 709 MBG710 32mm x 1" 20 MB 710 MBG711 32mm x 1 1/4" 20 MB 711 MBG712 40mm x 1/2" 20 MB 712 MBG713 40mm x 3/4" 20 MB 713 MBG714 40mm x 1" 20 MB 714 MBG715 40mm x 1 1/4" 20 MB 715 MBG716 40mm x 1 1/2" 20 MB 716 MBG719 50mm x 3/4" 10 MB 719 MBG720 FEMALE 50mm x 1" 10 MB 720 MBG721 COMBINATION 50mm x 1 1/4" 10 MB 721 MBG722 TEEPIECE 50mm x 1 1/2" 10 MB 722 MBG723 50mm x 2" 10 MB 723 MBG mm x 1/2" 20 MB 732 MBG mm x 1/2" 20 MB 733 MBG mm x 3/4" 20 MB 734 MBG mm X 1/2" 20 MB 735 MBG mm X 3/4" 20 MB 736 MBG 737 FEMALE 25mm x 1" 20 MB 737 MBG 741 COMBINATION 32mm x 1 1/4" 20 MB 741 MBG 746 ELBOW 40mm x 1 1/2" 20 MB 746 MBG mm x 2" 20 MB 752 MBG mm x 1/2" 20 MB 762 MBG 764 FEMALE 20mm x 3/4" 20 MB 764 MBG 765 ADAPTOR ( P x FI) 25mm x 1" 20 MB 765 MBG mm x 1 1/2" 20 MB 767 Effective 01 September 2014
9 EMJAY INSERT FITTINGS PAGE 8 MB mm 20 MB mm 20 FLOW MB mm 20 CONTROL MB mm x 5/8" 20 MB mm x 3/4" 20 MB mm x 7/8" 20 MB mm x 7/8" 20 TAP MB mm x 5/8" 20 CONNECTOR MB mm x 3/4" 20 MB mm x 3/4" BSP 20 MB mm x 3/4" USA 20 MB mm x 3/4" BSP 20 HOSE TAIL MB mm x 3/4" USA 20 MB mm 20 MB mm 20 MB mm 20 MB mm 20 HOSE CLAMP MB mm 20 VACUUM BREAKER MB mm 20 EMJAY DRIP FITTINGS (BROWN) CONNECTOR MDA117 17mm 20 ELBOW MDA217 17mm 20 TEE MDA317 17mm 20 MALE ADAPTOR (PxMI) MDA417 17mm x ½" BSP 20 MDA517 17mm x ¾" BSP 20 MALE TEE MDA617 17mm x ½" BSP 20 FEMALE TEE MDA717 17mm x ½" BSP 20
10 FULL FLOW COMPRESSION FITTINGS PAGE 9 CONNECTOR FF mm 20 FF mm 20 FF mm 20 FF mm 20 REDUCER FF mm x 13mm 20 FF mm x 13mm 20 FF mm x 15mm 20 FF mm x 15mm 20 FF mm x 20mm 20 FF mm 20 FF mm 20 FF mm 20 FF mm 20 TEEPIECE FF mm x 13mm 20 FF mm x 13mm 20 FF mm x 15mm 20 FF mm x 15mm 20 FF mm x 20mm 20 REDUCING TEEPIECE FF mm x 1/2" 20 FF mm x 1/2" 20 FF mm x 3/4" 20 FF mm x 3/4" 20 FF mm x 1/2" 20 FF mm x 1/2" 20 MALE COMBINATION FF mm x 3/4" 20 TEEPIECE FF mm x 1" 20 FF mm x 1/2" 20 FF mm x 3/4" 20 FF mm x 1/2" 20 FEMALE COMBINATION FF mm x 3/4" 20 TEEPIECE ELBOW FF mm 20 FF mm 20 FF mm 20 FF mm 20 FF mm x 15mm 20 REDUCING ELBOW
11 FULL FLOW COMPRESSION FITTINGS PAGE 10 FF mm x 1/2" 20 FF mm x 1/2" 20 FF mm x 3/4" 20 FF mm x 3/4" 20 FF mm x 1/2" 20 FF mm x 1" 20 FF mm x 1/2" 20 MALE COMBINATION FF mm x 3/4" 20 ELBOW FF mm x 1" 20 FEMALE COMBINATION ELBOW FF mm x 1/2" 20 FF mm x 1/2" 20 FF mm x 3/4" 20 FF mm x 1/2" 20 FF mm x 3/4" 20 FF mm x 3/4" 20 TAP CONNECTOR FF mm x 1/2" 20 FF mm x 3/4" 20 FF mm x 1/2" 20 FF mm x 3/4" 20 FF mm x 1" 20 FF mm x 1/2" 20 FF mm x 3/4" 20 P X MI ADAPTOR FF mm x 1" 20 END PLUG FF mm 20 FF mm 20 FF mm 20 FF mm 20 DRAIN VALVE, 3/4" BSP NUT FF mm 20 FF mm 20 FF mm 20 FF mm 20 FF mm 20 FLOW CONTROL
12 GROMMETS & GROMMET FITTINGS PAGE 11 EMJAY GROMMET FITTING GF mm x No.5 20 GF mm x No.5 20 GF mm x No.6 20 GF mm x No.6 20 GF mm x No.8 20 GF mm x No.8 20 EMJAY GROMMET RG 4 13mm 100 RG 5 15mm 100 RG 6 20mm 100 RG 8 25mm 100 FULL FLOW GROMMET FITTING FF mm x No FF mm x No FF mm x No FF mm x No FF mm x No FF mm x No EMJAY FILTERS & SPARES MB mm 20 MB 159(B) 13mm 20 MB mm 20 MB 160 (B) 15mm 20 MB mm 20 EMJAY IN-LINE FILTER MB 161 (B) 20mm 20 EMJAY IN-LINE FILTER CARTRIDGE & WASHER MB MBF 04 20mm FULL FLOW ENDS 1 MBF 05 25mm FULL FLOW ENDS 1 MBF 14 20mm INSERT ENDS 1 MBF 15 25mm INSERT ENDS 1 MBF 24 3/4" BSP ENDS 1 MBF 25 1" BSP ENDS 1 The above are available in Clear (C suffix) or Black (B suffix) with SERIES 3000 INLINE FILTER 80 mesh (80 suffix) or 120 mesh (120 suffix) elements (COMPLETE WITH ELEMENT AND ENDS) eg: MBF04C80 = 20mm Full Flow, Clear Barrel, 80 Mesh Element SERIES 3000 SPARES MBF MESH (Black) 1 ELEMENTS MBF MESH (Yellow) 1 MBF MESH (Blue) 1 BARREL MBF 31C Clear 1 BARREL MBF 31B Black 1 NUTS (SOLD IN PAIRS) MBF 32 Price per Pair 1 RIBBED CAP MBF 33 1 POLYPIPE STOP MBF 34 1 SEAL KIT MBF 35 consists of 5 seals 1 ENDS (SOLD IN PAIRS) MBF mm FULL FLOW ENDS 1 MBF mm FULL FLOW ENDS 1 MBF mm INSERT ENDS 1 MBF mm INSERT ENDS 1 MBF 324 3/4" BSP ENDS 1 MBF 325 1" BSP ENDS 1
13 WATER WONDER SPRINKLERS & VALVES PAGE 12 2" POP-UP SPRINKLER (COMPLETE) PU 200F PU 200H PU 200T PU 200Q " POP-UP SPRINKLER (COMPLETE) PU 300F PU 300H PU 300T PU 300Q PS 300F PS 300H PS 300T PS 300Q SHRUB SPRAY (COMPLETE) PR mm STAND PIPE 20 NOZZLES PUN 300F PUN 300H PUN 300T PUN 300Q PA 100 1/2" BSP (for presfit jets) 20 PA 200 1/2" BSP x 2BA 20 (for microjets) UNIVERSAL SHRUB ADAPTOR PA 400 1/2" BSP 20 SHUT-OFF VALVES FULL FLOW VF mm x 3/4" 20 VF mm x 3/4" 20 VF mm x 3/4" 20 VB mm x 3/4" 20 VB /15mm x 3/4" 20 VB mm x 3/4" 20 VB mm x 3/4" 20 SHUT-OFF VALVES: VT 250 1" x 1" BSP (Threaded) 20 INSERT & THREADED SHUT-OFF VALVES: SNAP-ON VS 100 3/4" 20
14 SNAP-ON HOSE FITTINGS PAGE 13 SB 110 1/2" 20 SB 120 5/8" 20 SB 130 3/4" 20 SB 140 7/8" 20 TAP CONNECTOR SB 220 1/2" Hose 20 HOSE CONNECTOR SB 224 1/2" Hose (15mm) 20 SB 225 3/4" Hose (20mm) 20 SNAP-ON/EMJAY HOSE CONNECTOR SB 250 3/4" BSP 20 SB 260 3/4" USA 20 ACCESSORY ADAPTOR SB HOSE JOINER SB /15mm Insert 20 SB mm Insert 20 POLYPIPE CONNECTOR COUPLING SB mm Full Flow 20 SB mm Full Flow 20 SB mm Full Flow 20 SB mm 20 SB mm 20 SB mm 20 SNAP-ON / FULL FLOW CONNECTOR SB SNAP-ON SPRAY NOZZLE
15 EMJAY POLY THREADED FITTINGS PAGE 14 MALE MBP 350 1/2" BSP 20 THREADED MBP 355 3/4" BSP 20 TEE PIECE MBP 360 1" BSP 20 MALE MBP 370 1/2" BSP 20 THREADED MBP 375 3/4" BSP 20 ELBOW MBP 380 1" BSP 20 MBP 391 1/2" 20 MBP 392 3/4" 20 MBP 393 1" 20 MBP /4" 20 MBP /2" 20 MALE THREADED PLUG MBP 396 2" 10 MBP 500 1/2" BSP (15mm) 20 MBP 505 3/4" BSP (20mm) 20 MBP 510 1" BSP (25mm) 20 MBP /4" BSP (32mm) 20 MBP /2" BSP (40mm) 20 NIPPLE MBP 513 2" BSP (50mm) 10 MBP 520 3/4" x 1/2" (20 x 15mm) 20 REDUCING MBP 524 1" x 1/2" (25 x 15mm) 20 NIPPLE MBP 525 1" x 3/4" (25 x 20mm) 20 MBP /4" x 1" (32 x 25mm) 20 MBP /2" x 1 1/4" (40 x 32mm) 20 MBP 537 2" x 1 1/2 (50 x 40mm) 10 MBP 622 3/4" x 1/4" (20 x 8mm) 20 MBP 623 3/4" x 1/2" (20 x 15mm) 20 MBP 624 1" x 1/2" (25 x 15mm) 20 MBP 625 1" x 3/4" (25 x 20mm) 20 MBP /4" x 1/2" (32 x 15mm) 20 MBP /4" x 3/4" (32 x 20mm) 20 REDUCING MBP /4" x 1" (32 x 25mm) 20 BUSH MBP /2" x 1/2" (40 x 15mm) 20 MBP /2" x 3/4" (40 x 20mm) 20 MBP /2" x 1" (40 x 25mm) 20 MBP /2" x 1 1/4" (40 x 32mm) 20 MBP 633 2" x 1/2" (50 x 15mm) 10 MBP 634 2" x 3/4" (50 x 20mm) 10 MBP 635 2" x 1" (50 x 25mm) 10 MBP 636 2" x 1 1/4" (50 x 32mm) 10 MBP 637 2" x 1 1/2 50 x 40mm) 10
16 EMJAY POLY THREADED FITTINGS PAGE 15 MBP 651 1/2" BSP (15mm) 20 MBP 652 3/4" BSP (20mm) 20 SOCKET MBP 653 1" BSP (25mm) 20 MBP /4" BSP (32mm) 20 MBP /2" BSP (40mm) 20 MBP 656 2" BSP (50mm) 10 IMPACT SOCKET (Green - with offset threads) MBG 575 3/4" Non-Standard 20 MBP 660 3/4" x 1/2" (20 x 15mm) 20 MBP 661 1" x 1/2" (25 x 15mm) 20 MBP 662 1" x 3/4" (25 x 20mm) 20 REDUCING SOCKET MBP /4" x 1" (32mm x 25mm) 20 MBP /2" x 1" (40mm x 25mm) 20 MALE TO MBP 754 1/2" (15mm) 20 FEMALE MBP 755 3/4" (20mm) 20 ELBOW MBP 756 1" (25mm) 20 MBP 790 1/2" BSP (15mm) 20 FEMALE MBP 791 3/4" BSP (20mm) 20 END CAP MBP 792 1" BSP (25mm) 20 MBP /4" BSP (32mm) 20 MBP /2" BSP (40mm) 20 MBP 795 2" BSP (50mm) 10 MBP 801 1/2" BSP (15mm) 20 FEMALE MBP 802 3/4" BSP (20mm) 20 TEE PIECE MBP 803 1" BSP (25mm) 20 MBP /4" BSP (32mm) 20 MBP /2" BSP (40mm) 20 MBP 806 2" BSP (50mm) 10 MBP 811 1/2" BSP (15mm) 20 FEMALE MBP 812 3/4" BSP (20mm) 20 ELBOW MBP 813 1" BSP (25mm) 20 MBP /4" BSP (32mm) 20 MBP /2" BSP (40mm) 20 MBP 816 2" BSP (50mm) 10
17 EMJAY MANIFOLD FITTINGS PAGE 16 MM 100 MALE 1" BSP 20 MM 101 UNION -1" BSP incl. manifold nipple 20 MANIFOLD TEE PIECE MM 110 MALE 1" BSP 20 MM 111 UNION -1" BSP incl. manifold nipple 20 MANIFOLD CROSS PIECE MM 120 MALE 1" BSP 20 MM 121 UNION -1" BSP incl. manifold nipple 20 MANIFOLD ELBOW MANIFOLD INLET MM 130 1" BSP - MALE 20 (MALE - No Coupling Required) MANIFOLD END CAP MM (MALE - No Coupling Required) MANIFOLD COUPLING MM MANIFOLD CLIP MM 160 Plain Clip 20 MM 161 Wall Mount Clip 20 MM 170 1" BSP / ACME 20 MANIFOLD NIPPLE MM 180 UNION - 1" BSP 20 * MANIFOLD VALVE ADAPTOR
MICROJET IRRIGATION SYSTEMS
CATALOGUE 01 August 2010 MICROJET IRRIGATION SYSTEMS P.O. Box 279, Eppindust, 7475, South Africa Tel : +27 (0)21 535 1310 Fax : +27 (0)21 535 1166 email : queries@microjet.co.za http://www.microjet.com
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
PVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
1220 Self-Contained Carpet Extractor
0 Self-Contained Carpet Extractor Operator and Parts Manual TENNANT COMPANY Commercial Products RANSOM STREET HOLLAND MI U.S.A. FAX: 00 0 CUSTOMER SERVICE: 00-00 Rev. 00 (-) ELECTRICAL DIAGRAMS Tennant
5000 Sc. Cleaning Solution Generator Parts Manual. North America / International. DM20008 Rev. 02 (6-2012) *DM20001*
5000 Sc Cleaning Solution Generator Parts Manual North America / International www.tennantco.com DM20008 Rev. 02 (-202) *DM2000* A B Ref Part No. Serial Number Description Qty. 828 (000000- ) Bracket Wldt,
PE PIPE & FITTINGS LDPE PIPE
LDPE PIPE All LDPE pipe is made with 100% virgin material ECO LDPE is made with 100% re-grind virgin material Pipes rated at 4 bar at 20 0 C No 2 for years All LDPE pipe is made and tested in our own factory
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
Viega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
SEPTEMBER Voted Top Product of 2010 by readers of PHPI Magazine
Polybutene Plumbing & Heating Price list SEPTEMBER 2011 Voted Top Product of 2010 by readers of PHPI Magazine 0800 043 8883 The Buteline Plumbing System is an integrated flexible plumbing system incorporating
PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
Plumbing Brass Specification Guide
Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94 SINCE 1998 PREVIOUSLY PAC FAB 1 2 3 KEY 4 4654-25 KEY 4 4654-69 KEY 8 4654-30 20 4 5 7 6 KEY 8 4654-74A KEY 9 4654-23 8 9 10 12 13 KEY 23 4601-4801 KEY 19 4650-14A
EPX2155. Piston Pump. Owner s Manual. Model Numbers: Stand Upright Cart Low Boy Cart
EPX Piston Pump Owner s Manual Model Numbers: 000 Stand 00 Upright Cart 00 Low Boy Cart SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com
MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
F250 F550
AIR INNOVATEDTM Illustrated Parts List for VMAC System V900111 Ford 6.8 L Triton V 10 2011 2014 F250 F550 www.vmacair.com Illustrated Parts List for VMAC System V900111 FORD 6.8 L TRITON V10 2014-2011
HD22 and HD30 Service Parts
HD and HD0 Service Parts This is the list of service parts and wiring diagrams for all versions of these two hotel dispensers. Pay close attention to the voltage and/or cycles to be sure of ordering the
GEM TOOL ORDER FORM SAUGERTIES, NY 12477
ALUMINUM PIPING UNION 20 MM 19.7 D1 ALR TU20L6 $ 52.54 20 MM 4A ALR UN 20 $ 9.77 25 MM 19.7 D2 ALR TU25L6 $ 63.38 25 MM 4B ALR UN 25 $ 12.17 32 MM 19.7 D3 ALR TU32L6 $ 97.50 32 MM 4C ALR UN 32 $ 17.24
Call us on
RAINWATER & PLUMBING 02 Rainwater & Plumbing Half Round 112mm, Rainwater System White, Black, Brown, Grey ½ Rd Gutter 4m R10002 112/68mm 11.95 ½ Rd Fascia R10007 1.00 ½ Rd - C/Iron Ogee Adapter L/H R10983
RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
PP-R & PVC-U Products Catalogue
PP-R & PVC-U Products Catalogue INDEX PP-R Products Page 3 PVC-U Products Page 7 Points To Pay Attention When Installing Ppr Pipes And Fittings Due to their brittle characteristic and behavior below 0
LCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No
LCD 500,1500 Spare parts list Handheld core drills LCD 500 LCD 500 LCD 1500 Valid from serial number BGF0006875 BGF0006875 BGF0006875 2015 Construction Tools PC AB No. 3392 5193 01 2015-06 General information
CH-PVDF RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS. Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov.
RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS CH-PVDF-1115 Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov. 25, 2013 Suggested list prices subject to change without notice. UPC
Dishmachine Division Please call for pricing or
Dishmachine Division Please call for pricing -00-- or -00-5- ELECTRICAL BOX Page 0 and PLUMBING Page WRAPPER Page - PAN Page -5 STAND Page and KLE--HL Convertible Dishwashing Machine Part No. 05 5 5 0
SPARE PARTS LIST. v.3
SPARE PARTS LIST v. Parts list chassis Hose connection /8 0 2 Sliding valve Sliding valve Sliding valve 5 Quick coupling female 27 Quick coupling male 7 Barrel nipple /8 29 8 Handle complete see page 9
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
smart irrigation solutions
smart irrigation solutions ENKi 615 Modular Controller The ENKi 615 Modular Controller is engineered for ease of use. Out of the box, it comes standard with six stations expandable up to 15 stations through
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
6.5 Cu. Ft. S-Series Blast Pot Part Numbers & Schematics Guide
Always Innovative. Always Reliable. 6.5 Cu. Ft. S-Series Blast Pot Part Numbers & Schematics Guide Metering Valve Remote Configurations Standard Features Upgrade Options Moisture Separator Bantam Part
Illustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
MK-MANTA I. Model MK-Manta I Core Drill Owner s Manual Parts List & Operating Instructions. serial number CAUTION
please record the serial number of your drill in this block. serial number For your one (1) year warranty to be effective, complete the warranty card (include the serial number) and mail it in as soon
For more information on where your nearest stockist is or for a complete demonstration by one of our team, please call us today
Polybutene Plumbing & Heating Price list APRIL 2014 0800 043 8883 The Buteline Plumbing System is an integrated flexible plumbing system incorporating Polybutene pipes, fittings and tools which range in
DIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
RL-H80 PARTS LIST # K
RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G35 Type Q1
TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G35 Type Q Mfg JPN Section ENGINE Illustration CYLINDER HEAD 00 222-878-000 CYLINDER HEAD 00 002 228-878-000 GASKET, CYLINDER HEAD (NOT AVAILABLE)
Wavin Hep 2 O Flexible PB Push-Fit plumbing system
Water distribution Heating and cooling PRODUCT LIST Wavin Hep 2 O Flexible PB Push-Fit plumbing system Contents 1 Hep2O Pipe Page 3 2 Hep2O Fittings Page 4 3 Hep2O Accessories Page 14 4 Making connections
For price requests and technical information please contact us:
For price requests and technical information please contact us: Phone: +49 (0) 9321 / 38308 0 Fax: +49 (0) 9321 / 38308 69 E-Mail: sales@abrasiveplant-technology.com PRODUCT LIST: Spare and wear parts
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
The Trade Soil & Waste Product Guide
The Trade Soil & Waste Product Guide 6/7 Empire Centre Watford Herts WD24 4YH 01923 233330 www.brandsofwatford.co.uk Introduction Welcome to the new edition of our Trade Soil & Waste Product Guide. This
GPX 1250 Gas Piston Pump
GPX 0 Gas Piston Pump Owner s Manual Model Number 0000 SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com Printed in the U. S.
SharkBite 25 W ARRANTY Sh YEAR arkbite
25 SharkBite WARRANTY YEAR SharkBite The SharkBite Plumbing System SharkBite has established a reputation as one of Australia s best plumbing systems. Quick & easy to use. Fittings for PEX and Copper Pipe
Pipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
FSE 130 Fuel System Canister
FSE 130 Fuel System Canister 8.2 4014 6 0 5 9 6 0 6 2 1013 6056 6060 6061 6052 4015 6053 6051 4016 4017 6050 3017 (Not visible on the back) 2010 2009 3016 7050 6058 6057 1011 6055 1012 6054 FSE 130 Fittings
ORDERS MUST BE PLACED BY ING
MIDLAND METAL MFG Fittings, Valves, Clamps & Accessories for Hose, Pipe and Tube ORDERS MUST BE PLACED BY EMAILING SPECIALS@MIDLANDMETAL.COM PVC DWV FITTINGS 2 WEEK LEAD TIME Use your Midland Metal multiplier
PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
PERFORMA Operator Manual. Performa (115V & 230V) Base Assembly 60462A
Performa (115V & 230V) Base Assembly 60462A # Part # Description 1 60422A Pump Assembly 60444A Pump Assembly ( 230 volt) 2 71829A Base 3 71927A Locking Bracket 4 71921A Bracket, Tool Head 5 72157A Head,
Ultra High Efficiency (ef) Series 60 and 100 Gallon Models
COMMERCIAL GAS REPLACEMENT PARTS LIST Ultra High Efficiency (ef) Series 60 and 100 Gallon Models Includes Hydrojet Total Performance System Including: 100 Gallon Top Water Connections 100 Gallon Side Water
SUPERIOR ALUMINIUM COMPRESSED AIR RETICULATION
A SUBSIDIARY F PNEUTECH GRUP SUPERIR ALUMINIUM CMPRESSED AIR RETICULATIN INDUSTRIAL AIR SYSTEMS NZ FREEPHNE: Email: sales@industrialair.co.nz Web: www.industrialair.co.nz SUPERIR ALUMINIUM CMPRESSED AIR
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214 TABLE OF CONTENTS PEX PIPE page category SUPERPEX ultra resistant potable water pipe 3 C-54 OXYPEX oxygen barrier radiant
May Wavin Hep2O Push-fit plumbing system. Product List FLEXIBLE PB PUSH-FIT PLUMBING SYSTEM. Solutions for Essentials
May 2013 Wavin Hep2O Push-fit plumbing system Product List FLEXIBLE PB PUSH-FIT PLUMBING SYSTEM Wavin Hep2O - Product List Content 1 Hep2O PB pipe page 3 2 Hep2O fittings page 4 3 Hep2O accessories page
Viega Pexcel Water System
Viega Pexcel Water System PAGE 57-1 ViegaPEX Ultra ViegaPEX Ultra is manufactured to ASTM F876/F877 standards and listed to ANSI/ NSF Standards 14 and 61. It is chlorine resistance rated for both traditional
TX-3 TILE SAW OPERATION & PARTS MANUAL
www.mkdiamond.com TILE SAW OPERATION & PARTS MANUAL Revision 00 0.09.009 Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the equipment at all
TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G150 Type UA5 Mfg Section ENGINE Illustration CYLINDER
Section ENGINE Illustration CYLINDER 00 0623-887-305 CASE KIT, BREATHER () 002 2000-887-325 CYLINDER ASSY. 00 003 233-887-306 GUIDE, VALVE (OVER SIZE) (2) 003 234-887-305 GUIDE, VALVE (OVER SIZE) (2) 004
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing Why Gardner Denver? Simply stated There is no equal Quick-Lock from Gardner Denver has taken piping systems to a new level. Without compromising any structural
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
Linx Continuous Ink Jet Printers Parts List
Linx Continuous Ink Jet Printers Parts List Parts Only Edition 11 June 2013 Parts List Using This Parts and Prices List The information in this Parts List is to provide a distributor of Linx products with
MIXERS, BASIN & SINK FITTINGS DELUXE RANGE
MIXERS, BASIN & SINK FITTINGS 1. C.P. PILLAR COCK SWAN NECK DELUXE... 1125/- EACH 2. C.P. PILLAR COCK SWAN NECK UNIVERSAL... 1170/- EACH 3. C.P. PILLAR COCK SWAN NECK J BEND... 1125/- EACH 4. C.P. SINK
Illustrated Parts List
Illustrated Parts List SERIAL NUMBERS 730080-730074 ENGINE RELATED COMPONENTS... ENGINE RELATED COMPONENTS...3 ENGINE RELATED COMPONENTS...4 BASE, COVER... BASE, COVER... BASE, COVER...7 BASE, COVER...8
Specialist Drainage. Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system. Specialist Drainage
Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system Vulcathene is a completely purpose-designed chemical resistant plumbing system that has been specified and
MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 07.07 Manual Part# 67 Caution: Read all safety and operating instructions before using this equipment. This parts
ROTATING SPRAYS Rotating Sprays Table of Contents Description Rev. # Pg. #
ROTATING SPRAYS Table of Contents Description Rev. # Pg. # Nelson R3000/S3000... 09-10...1 Nelson Nutator N3000... 08-08...2 Blank Page... 12-09...3 Senninger I-WOB... 06-10...4 Senninger I-WOB UP3...
ISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT
ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK
MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 202 08.2012 Manual Part# 161117 Caution: Read all safety and operating instructions before using this equipment.
15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
PVC SOLVENT WELD DRAIN WASTE & VENT
PVC-17R PAGE 1 november 007 COUPLING (Hub x Hub) 0 110 11 11 11 1171 1 1/ 0 7 00 00 0 10.9.79 1.0.. 1. REDUCER BUSHING (Spigot x Hub) Style 17 x TRAP ADAPTER (Spigot x Slip Joint ) 1 19.71 REDUCER COUPLING
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBERS BEFORE G10000 WITH SERIAL NUMBERS AFTER G00000 FOR DOWN PRESSURE HYDRAULICS WITH
Thetford Corp. Refrigerator Replacement Parts List
Thetford Corp. Refrigerator Replacement Parts List Australian Models N0., N0. N0., N0. N0., N0. Part No. NORCOLD /8/0 Cabinet Area - Front View - N0. and N0. 8 0 Parts List Australian Models - Page NO.
Spare part catalogue GB 03/2007. Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7
Spare part catalogue 0020037555.03 GB 03/2007 Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7 Content General view of sheet Page 3 04 Burner Page 4 06 Heat exchanger Page 6 07 Casing
brass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
Repair Parts List DISHWASHER MODEL NUMBER WC202. When requesting service or ordering parts, always provide the following information:
Repair Parts List DISHWASHER MODEL NUMBER WC202 When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
F2.5MHB(69M1) F2.5AMH 03(69M1) 2B69M 100E1
MHB(69M1) AMH 03(69M1) 2B69M 100E1 A1 FOREWORD This Parts Catalogue is related to the parts for the model(s) in the below frame. When you are ordering replacement parts, please refer to this Parts Catalogue
Section 10 Mk5 and Mk7 Printhead Offset Code Availability
Mk5 and Mk7 Printhead Offset Code Availability Offset codes available to recalibrate printheads for the Linx inks shown below, if necessary. XXXXXXXXXXXX XXXXXXXInkXXX XXXXXXXXXPrint head 1009 1010 1014
Repair Parts List DRYER MODEL NUMBER MDG50PNHWW. When requesting service or ordering parts, always provide the following information:
Repair Parts List DRYER MODEL NUMBER MDG50PNHWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
schematics schematics lavatory faucet with pop-up lavatory faucet with pop-up kitchen faucet with spray
ADVANTAGE 19-161 faucet with pop-up 19-361 faucet with pop-up B 22-637 Handle kit w/ buttons D 26-637 Cartridge E 23-244 Aerator F 23-433 Seat G 23-436 Spring H 24-099 Locknut I 36-116 supply washer &
CPVC Hot and Cold Water System
CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard
MK-EZ PROFILER OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-EZ PROFILER OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS Revision 103 08.2018 Manual Part No. 170565-OM Caution: Read all safety and operating instructions before using this
Standard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
Grease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
Connector System for Circular Contacts
Connector System for Circular Contacts Introduction The diameter 1.5 mm and diameter 2.5 mm Connector System is designed for electronic and electrical applications in motor vehicles. It fullfils all requirements
COP 2560 Drifter Parts for Atlas Copco COP2560 No Crawler Drill Drfter Part Number Part Name Q'ty Unit Price Remarks
COP 2560 Drifter Parts for Atlas Copco COP2560 No Crawler Drill Drfter Part Number Part Name Q'ty Unit Price Remarks 2 COP 2560 3115 3456 80 CYLINDER COMPL. 1 INCL. POS 3,5-10,11,12 3 COP 2560 CYLINDER
TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G65 Type RD Mfg Section ENGINE Illustration G65/GS65 CYLINDER HEAD
TRU-POWER, INC. Product Line GENERAL PURPOSE ENGINE Model Name G65 Type RD Mfg Section ENGINE Illustration G65/GS65 CYLINDER HEAD 00 220-823-000 CYLINDER HEAD 00 002 225-823-000 GASKET, CYLINDER HEAD (NOT
standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
SB 202. Spare parts list Hydraulic breakers. SB 202 s/n BES Construction Tools PC AB No
SB 202 Spare parts list Hydraulic breakers SB 202 s/n BES051618 2018 Construction Tools PC AB No. 9800172001 2018-01 General information This spare parts list applies to the following: Part number 8460030050
OPERATING INSTRUCTION MANUAL MODEL P/R60 & P/R65 DIFFERENTIAL PH & ORP PROBES
OPERATING INSTRUCTION MANUAL MODEL P/R60 & P/R65 DIFFERENTIAL PH & ORP PROBES N116-19 REV. 10 Water Analytics, Inc. 100 School Street Andover, MA 01810 Tel: (978) 749-9949 (855) 747-7623 Fax: (978) 749-9961
SCHEDULE 40 PVC. List Prices
SCHEDULE 40 PVC List Prices Effective: November 14, 2005 Tee 401-003 3/8 100 1.99 401-005 0.64 401-007 0.73 401-010 1 50 1.38 401-012 1 1 /4 25 2.15 401-015 1 1 /2 25 2.61 401-020 2 25 3.80 401-025 2 1
UNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
9. SPARE PARTS -43- STEAM SYSTEM (OPTION ONLY) Steam Switch Water Solenoid
9. SPARE PARTS PART NO DESCRIPTION CONTROLS 021473 Switch - Power 024562 Power Relay (From S/N 232054) 024563 Power Relay Upgrade Kit (To S/N 232053) 017121 Thermostat 020823 Knob - Thermostat / Bake Timer
Tech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
ARTPLASTICS PRODUCT BROCHURE INNOVATIVE PLUMBING FITTINGS. BOUNTYBRASSWARE Designer Bathroom Fittings. Innovative Plumbing Fittings
PRODUCT BROCHURE INNOVATIVE PLUMBING FITTINGS Innovative Plumbing Fittings BOUNTYBRASSWARE Designer Bathroom Fittings ABOUT US Art Plastics commenced its operations in Bayswater, Perth in February 19.
PBP3000 Blower UT A Page 1 of 14 Carburetor And Fuel Tank
PBP3000 Blower UT-08033-A Page 1 of 14 Carburetor And Fuel Tank PBP3000 Blower UT-08033-A Page 2 of 14 Carburetor And Fuel Tank Ref # Part Number Qty S/P/F Description 1 08840 1 /P Heat Dam Gasket 2 81208
Quick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems
Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10
Jack Plates. Jack Plates & Accessories PREMIER. PT-625B1 Flush Jack. PREMIER PT-625B3 Flush Jack
Jack Plates PT-625B1 Flush Jack PT-625B1 Flush Jack Flush jack assembly is designed for flush mounting in a standard outlet box. It includes a 625F modular jack, 19A faceplate, 43A bracket, and mounting