PTC-150 DVIP Protocol

Transcription

1 PTC-150 DVIP Protocol July 21,

2 1. Command Driving Protocol 1.1 Command Head: Command Start: 0x00 Command Length: 0x0n (n = total length from 0x00 to 0xFF) Start Byte 0x00 Command Length Byte Command Packet Command Length 2

3 1.2 Pan-Tilt Drive Command Name Head Command packet Note Up 00 0B VV WW FF Pan Speed VV Down 00 0B VV WW FF (=01h:Slow to 18h:Fast) Left 00 0B VV WW FF Tilt Speed WW Right 00 0B VV WW FF (=01h:Slow to 18h:Fast) Up Left 00 0B VV WW FF Up Right 00 0B VV WW FF Down Left 00 0B VV WW FF Down Right 00 0B VV WW FF Stop 00 0B VV WW FF Home FF Reset FF Absolute Position VV 00 0Y 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF YYYYY : Pan Position Relative Position VV 00 0Y 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF ZZZZ : Tilt Position Pan Reverse 00 0A On: E FF 00 0A Off: E FF Tilt Reverse 00 0A On: E FF 00 0A Off: E FF 3

4 1.3 Camera Zoom Drive Stop FF Tele(Standard) FF Wide(Standard) FF Tele(Variable) p FF p(=0 Slow to 7:Fast) Wide(Variable) p FF q(=0 Slow to 7:Fast) Direct 00 0B p 0q 0r 0s FF pqrs : Zoom Position 4

5 1.4 Camera Focus Stop FF Far(Standard) FF Near(Standard) FF Far(Variable) p FF p(=0:low to 7:Fast) Near(Variable) p FF q(=0:low to 7:Fast) Direct 00 0B p 0q 0r 0s FF pqrs : Focus Position 0x1000(Far) ~ 0xF000(Near) Auto Focus FF AF ON/OFF Manual Focus FF Auto/Manual FF One Push Trigger FF One Push AF Trigger Infinity FF Force Infinity 5

6 1.5 Camera White Balance Auto FF Manual FF Indoor FF Outdoor FF One Push WB FF ATW FF One Push Tigger : FF 6

7 1.6 Camera R-Gain Reset FF INCREASE(+) FF DECREASE(-) FF Direct 00 0B p 0q FF R-Gain Direct pq(=00 to FF) 7

8 1.7 Camera B-Gain Reset FF INCREASE(+) FF DECREASE(-) FF Direct 00 0B p 0q FF B-Gain Direct pq(=00 to FF) 8

9 1.8 Camera Shutter Auto A 02 FF Manual FF Direct 00 0B A p 0q FF pq = shutter position (00~15) INCREASE(+) A 02 FF DECREASE(-) A 03 FF 9

10 1.9 Camera IRIS Mode B 0p FF p = 0: Reset 2: Up 3: Down Reset B 00 FF INCREASE(+) B 02 FF DECREASE(-) B 03 FF Direct 00 0B B p 0q FF pq = iris position (00, 05~11) 10

11 1.10 Camera Gain Reset C 00 FF INCREASE(+) C 02 FF DECREASE(-) C 03 FF Direct 00 0B C p 0q FF pq : Gain Position (00~0F) Limit C 0p FF p: Gain position (4~F) 11

12 1.11 Camera Brightness Direct 00 0B D p 0q FF pq = brightness position INCREASE(+) E 02 FF DECREASE(-) E 03 FF 12

13 1.12 Camera Memory Reset F 00 0p FF Memory number p(=0 to F) Set F 01 0p FF Recall F 02 0p FF Speed 00 0A E 01 0B 0p 0q FF Memory number p(=0 to F) Exp. Command Mode Speed q(=1 to 18 : fast) E 0p FF p = 2: On 3: Off 13

14 1.13 Other Commands Address Set FF Color Bar On : FF Off : FF Camera Power On : FF Off : FF Camera Tally 00 0B E 01 0A 00 0r 0g FF r/g =2(ON)/ 3(OFF) r:red, g:green Camera Register Value 00 0A mm 0p 0q FF mm : Register No.(=00 to 7F) pq : Register Value(=00 to FF) (Need to Reboot camera after register setting) Screen Flip p FF p = 2(On)/ 3(Off) Screen Mirror p FF p = 2(On)/ 3(Off) AE Mode p FF p= 0: FULL-AUTO, 3: MANUAL, A: SHUTTER Priority, B: IRIS Priority, D: BRIGHT Video Format pq FF pq = 00: (1080/60i), 04: (1080/50i), 06: (1080/29.97p), 08: (1080/25p), 09: (720/59.94p), 0C: (720/50p), 13: (1080/59.94p), 14: (1080/50p) 14

15 1.14 Camera Status Inquiry Power Mode FF Focus Mode FF WB Mode FF R Gain FF B Gain FF AE Mode FF IRIS Position B FF Gain Position C FF Gain Limit C FF Brightness Position D FF Shutter Mode A FF Shutter Position A FF ID FF Version FF Screen Flip FF Screen Mirror FF Register pp FF Register No. pp=(0x00~0x7f) OSD Menu FF Pan Reverse E FF Return: Tilt Reverse E FF y FF(On) y FF(Off) 15

16 1.15 Full Status Inquiry PTC150 Status E 7E 70 FF Return x0, 50, aa, bb, cc, dd, ee, ff, gg, hh, ii, jj, kk, ll, FF aa bit0=1/0=power on/off, bit4=1/0= setting menu on/off bb bit 5 ~ bit 0 Video Format 00: (1080/60i), 04: (1080/50i), 06: (1080/29.97p), 08: (1080/25p), 09: (720/59.94p), 0C: (720/50p), 13: (1080/59.94p), 14: (1080/50p) cc 00= Manual, 01~ = Auto mode ATW dd bit 0 ~ bit 3 R Gain H ee bit 0 ~ bit 3 R Gain L ff bit 0 ~ bit 3 B Gain H gg bit 0 ~ bit 3 B Gain L hh 2= auto, 3= manual mode Focus mode ii 0= auto, 1~ = manual mode IRIS mode jj 0= AGC off (manual gain), AGC mode 1~ = AGC mode level kk bit 4= H_reverse, Video Flip, Pan_dir & Tilt_dir bit 5= V_reverse, bit 0=1= pan_tilt_reverse ll 3= FAST, 2=Middle, 1=Slow PTZ speed range 16

17 2. OSD Display Command 2.1 OSD Menu Mode On FF Off FF On/Off FF Cursor Up 00 0B FF Cursor Down 00 0B FF INCREASE (+) 00 0B FF DECREASE(-) 00 0B FF Enter 00 0A E FF Stop 00 0B FF 17

18 2.2 OSD Menu Mode Inquiry OSD Menu Mode Inquiry FF Return : y FF : On y FF : Off 18