Ricoh SG 3110DN MacProfile Print Setup Guide: Photoshop CS6

Transcription

1 Ricoh SG 3110DN IMPORTNT: efore proceeding, ensure the correct Ricoh printer driver and FabricMaker MacProfile have been installed. For assistance with profile installation, refer to the Installation Guide. NOTE: Your screens and menus may differ depending on the version of software and operating system being used. However, the settings will be identical. Photoshop Workspace Setup 1) egin by opening Photoshop. In the menu bar, click Edit > Color Settings (see FIGURE 1). FIGURE 1 PGE 1 of 10 >> v

2 2) In the Color Settings window that opens, match your settings to those shown below (see FIGURE 2). Custom S C D E P K F G H I J L M N O FIGURE 2. Settings: Custom. RG: srg IEC C. CMYK: U.S. Web Coated (SWOP) v2 D. GRY: Dot Gain 20% E. Spot: Dot Gain 20% F. RG: Convert to Working RG G. CMYK: Preserve Embedded Profiles H. Gray: Preserve Embedded Profiles I. Profile Mismatches: Check sk When Opening and Check sk When Pasting J. Missing Profiles: Check sk When Opening K. If Conversion Options are not visible, click More Options L. Engine: dobe (CE) M. Intent: Perceptual N. Check Use lack Point Compensation O. dvanced Controls: Leave at default values P. fter all of the settings match those specified above, click the Save button PGE 2 of 10 >>

3 Q. In the Save Color Settings window that opens, NME your new preset in the File Name field and click Save when complete (see FIGURE 3). FabricMaker.csf a FIGURE 3 b R. Color Settings Comment box will then appear. If desired, enter description at this time. Otherwise, click OK (see FIGURE 4). a b FIGURE 4 S. Click OK to exit the Color Settings window (see FIGURE 2). PGE 3 of 10 >>

4 3) In the menu bar, click File > New (Ctrl+N) (see FIGURE 5). FIGURE 5 4) In the New Document window that opens, make the selections shown below (see FIGURE 6). D C FIGURE 6. Color Mode: RG Color. Click the down arrows next to dvanced to view Color Profile: C. Color Profile: srg IEC D. Click OK to save your changes and continue PGE 4 of 10 >>

5 5) When opening or importing images in Photoshop, you may encounter a Missing Profile or Embedded Profile Mismatch warning. For the Missing Profile instance, select the radio button for ssign current working space: srg IEC and click OK to continue (see FIGURE 7). For the Embedded Profile Mismatch instance, select Convert document s colors to the working space and click OK to continue (see Figure 7). FIGURE 7 FIGURE 7 NOTE: lways choose to assign or convert to srg IEC ) Everytime an image is opened or imported in Photoshop, ensure that RG color mode has been selected. In the menu bar, click Image > Mode > RG Color. check mark should now be visible beside RG Color (see FIGURE 8). C FIGURE 8 PGE 5 of 10 >>

6 Printing from Photoshop with the Ricoh SG 3110DN 7) With the correct color settings entered, you are now ready to print. In the Menu ar, click File > Print. In the Photoshop Print Settings window, match your settings to those shown below (see FIGURE 9). H C E D G F FIGURE 9. Printer: RICOH ficiosg3110dn. If necessary, click the drop-down arrow to view Color Management options C. Color Handling: Photoshop Manages Colors D. Printer Profile: sg_sg3110dn_nlr_quilfabxtr_rg_v1.0 NOTE: If the profiles are not visible in the drop-down menu, try restarting Photoshop. If the profile is still missing after restarting the application, refer to the Installation Guide. E. Select: Normal Printing F. Rendering Intent: Perceptual G. If not already, check lack Point Compensation H. fter all of the correct settings have been entered, click the Print Settings... button. PGE 6 of 10 >>

7 I. In the Print window that opens, match your settings to those shown below (see FIGURE 10). NOTE: For older versions of Photoshop you will instead select Page Setup. a b FIGURE 10 a. Printer: RICOH ficiosg3110dn b. Paper Size: The size of your transfer paper 8) Click on Layout and select Paper Feed (see FIGURE 11). FIGURE 11 PGE 7 of 10 >>

8 9) In the Paper Feed window, match your settings to those shown below (see FIGURE 12).. ll Pages From: Tray 1 FIGURE 12 10) Click on Paper Feed and select Setup (see FIGURE 13). This will open the Setup window. FIGURE 13 PGE 8 of 10 >>

9 11) In the Setup window, match your settings to those shown below (see FIGURE 14). E C D FIGURE 14. Print Mode: Inkjet plain paper-high quality. Color Mode: Color C. Dithering: Use error diffusion D. Color profile: Off E. Select Save Current Settings as Preset beside Presets: (see FIGURE 14). Name your new preset accordingly and click OK to save your settings (see FIGURE 15). F FabricMaker a FIGURE 15 b F. Click Save to go back to the Print screen (see Figure 14). PGE 9 of 10 >>

10 12) ack in the Photoshop Print Settings window, click Print when you are ready to print your image (see FIGURE 16). FIGURE 16 Photoshop setup is now complete. Remember to, if necessary, convert imported graphics to the srg working space, ensure the RG color mode is checked and select the Ricoh SG 3110DN each time you print. PGE 10 of 10 >>