Ricoh SG 3110DN MacProfile Print Setup Guide: Illustrator CS6

Transcription

1 Ricoh SG 3110DN IMPORTNT: efore proceeding, ensure the correct Ricoh printer driver and FabricMaker MacProfile have been installed. For assistance with profile installation, refer to the Installation Guide. NOTE: Your screens and menus may differ depending on the version of software and operating system being used. However, the settings will be identical. dobe Illustrator Workspace Setup 1) egin by opening dobe Illustrator. In the menu bar, click Edit > olor Settings (see FIGURE 1). FIGURE 1 PGE 1 of 11 >> v

2 2) In the olor Settings window that opens, match your settings to those shown below (see FIGURE 2). ustom L D F G E I K J H FIGURE 2 N. Settings: ustom. RG: srg IE MYK: U.S. Web oated (SWOP) v2 D. RG: onvert to Working Space E. MYK: Preserve Numbers (Ignore Linked Profiles) F. Profile Mismatches: heck sk When Opening and also check sk When Pasting G. Missing Profiles: heck sk When Opening H. lick: More Options button if onversion Options are not available I. Engine: dobe (E) J. Intent: Perceptual K. heck: Use lack Point ompensation L. fter all of the settings match those specified above, click the Save button. PGE 2 of 11 >>

3 M. In the Save olor Settings window that opens, NME your new preset in the File Name field and click Save when complete (see FIGURE 3). fabricmaker a FIGURE 3 b N. lick OK to exit the color settings window (see FIGURE 2) 3) In the menu bar, click File > New (trl+n) (see FIGURE 4). FIGURE 4 PGE 3 of 11 >>

4 4) In the New Document window, make the selections shown below (see FIGURE 5). D FIGURE 5 E. lick the down arrow next to dvanced. olor Mode: RG. Raster Effects: High (300 ppi) D. Preview Mode: Default E. lick OK to save your changes and continue 5) When opening or importing images in Illustrator, you may encounter a Missing Profile or Embedded Profile Mismatch warning. For the Missing Profile instance, select the radio button for ssign current working space: srg IE and click OK to continue (see FIGURE 6). For the Embedded Profile Mismatch instance, select onvert document s colors to the working space and click OK to continue (see Figure 6). FIGURE 6 FIGURE 6 NOTE: lways choose to assign or convert to srg IE PGE 4 of 11 >>

5 6) Everytime an image is opened or imported in Illustrator, ensure that RG color mode has been selected. In the menu bar, click File > Document olor Mode > RG olor. check mark should now be visible beside RG olor (see FIGURE 7). FIGURE 7 Printing from Illustrator with Ricoh SG 3110DN 7) With the correct color settings entered, you are now ready to print. In the Menu ar, click File > Print. In the Print window, match your settings to those shown below (see FIGURE 8). FIGURE 8. Printer: RIOH ficiosg3110dn. Size: Defined by Driver. lick olor Management to view the color management settings. PGE 5 of 11 >>

6 8) In the olor Management area, match your settings to those shown below (see FIGURE 9). D F FIGURE 9. olor Handling: Let Illustrator determine colors. Printer Profile: sg_sg3110dn_nlr_quilfabxtr_rg_v1.0 NOTE: If the profile is not visible in the drop-down menu, try restarting Illustrator. If the profile is still missing after restarting the application, refer to the Installation Guide.. Rendering Intent: Perceptual D. fter all of the correct settings have been entered, click the Page Setup... button. PGE 6 of 11 >>

7 E. In the Page Setup window that opens, match your settings to those shown below (see FIGURE 10). a b FIGURE 10 c a. Format For: RIOH ficiosg3110dn b. Paper Size: The size of your transfer paper c. lick OK to continue. F. ack in the Print window, click the Setup... button to continue (see FIGURE 9). 9) lick on Layout and select olor Matching (see FIGURE 11). This will open the olor Matching window. FIGURE 11 PGE 7 of 11 >>

8 10) In the olor Matching window, select Ricoh olor Profile (see FIGURE 12). FIGURE 12 11) lick on olor Matching and select Paper Feed (see FIGURE 13). This will open the Paper Feed window. FIGURE 13 PGE 8 of 11 >>

9 12) In the Paper Feed window, match your settings to those shown below (see FIGURE 14).. ll Pages From: Tray 1 FIGURE 14 13) lick on Paper Feed and select Setup (see FIGURE 15). This will open the Setup window. FIGURE 15 PGE 9 of 11 >>

10 14) In the Setup window, match your settings to those shown below (see FIGURE 16). E D F FIGURE 16. Print Mode: Inkjet plain paper-high quality. olor Mode: olor. Dithering: Use error diffusion D. olor profile: Off E. Select Save urrent Settings as Preset beside Presets: (see FIGURE 16). Name your new preset accordingly and click OK to save your settings (see FIGURE 17). FabricMaker a FIGURE 17 b F. lick Print to go back to the Print screen (see Figure 16). PGE 10 of 11 >>

11 15) ack in the Illustrator Print Settings window, click Print when you are ready to print your image (see FIGURE 18). FIGURE 18 Illustrator setup is now complete. Remember to, if necessary, convert imported graphics to the srg working space, ensure the RG color mode is checked and select the Ricoh SG 3110DN each time you print. PGE 11 of 11 >>