KYROS. TOWEL RAILS Mounting, installation, starting and operation INSTRUCTION MANUAL. Class II

Transcription

1 KYROS INSTRUCTION MANUAL TOWEL RAILS Mounting, installation, starting and operation Class II

2 KYROS Thank you. Many thanks for your confidence in our Rointe products. Before you start to use the low-consumption Kyros towel rails we recommend that you read this manual carefully in order to use the product correctly with the maximum guaranteed results. 2

3 INDEX OF CONTENTS 1. DESCRIPTION OF THE KYROS TOWEL RAILS Description of the front panel Switch On and Off (Stand By) Select Temperature Lock the Control Panel Adjust Date and Time Main Menu Open Window Function Mounting Instructions Connecting Instructions KYROS Towel Rail technical characteristics Specific Regulations for Bathrooms Maintenance & Cleaning Safety Guarantee

4 KYROS 1. DESCRIPTION OF THE D SERIES TOWEL RAILS 4

5 1.1. Description of the front panel ICON INDICATION On / Off - Accept Decrease temperature - Move left Increase temperature - Move right Access/Back to menu - Move up Manual / Automatic - Move down Parts of the TFT screen

6 KYROS NUM. INDICATION 1 Hours programmed - AUTO 2 Days of the week 3 Time 4 Selected temperature 5 Locking the control panel 6 Manual / Automatic / Pilot wire functions 7 Comfort / Economy / Anti-frost modes 8 Heating Element in operation 9 Consumption behaviour indicator 10 Open Window function ICON DESCRIPTION Open Window function active - No detection Open Window function - Detected Consumption indicator green / yellow / red 6

7 Towel Rail Heating element on Comfort Mode activated Eco mode activated Anti-frost mode activated Automatic mode activated Manual mode activated Pilot Wire Control mode activated Not available in UK. Only upon demand Automatic function activated in USER mode Manual function activated in USER mode Pilot Wire Control function activated in USER mode Not available in UK. Only upon demand Product locked via towel rail control panel Product locked via Air Control remote 7

8 KYROS 1.2. Switch On and Off (Stand-by) The Kyros technology towel rail is switched on or off using the button. The following welcome appears on the TFT screen when the towel rail is switched on. The main temperature screen will appear after 5 seconds. If you press the button again when the towel rail is switched on it will revert to stand-by mode and the words Stand-By will appear. 5 seconds later and the Rointe logo will appear. 8

9 1.3. Temperature selection You can change the desired temperature using the keys or. If the temperature of the room is less than is desired then the towel rail will begin to heat up and the symbol will appear Locking the control panel You can lock the product from the actual control panel of the towel rail or remotely via the Air Control remote. On the product control panel you can lock the keypad by pressing and holding down the and buttons at the same time for 3 seconds. The locked icon will appear. When you press any button the image on the right will appear on the screen. You can unlock the product again by pressing and holding down the and buttons for 3 seconds. 9

10 KYROS If we lock the product via the application or remote control then the remote locked icon will appear on the screen. When you press any button on the towel rail control panel, the image on the right will appear on the screen. If the product is locked in this way, you can only unlock the towel rail via the Air Control remote Adjusting time and date It is possible to change the time on the towel rail from the control panel. Here we explain how to change the time from the towel rail control panel. Press the menu button to access the main menu. Select the sub-menu by using the and buttons then press to access. In the configuration sub-menu, use the and buttons to select the clock then press to access. Clear Memory 10

11 By pressing the button, the hours, minutes and days will flash depending on the number of times the button is pressed (1 for hours, 2 for minutes and 3 for the day of the week). We can change any of these by pressing the or buttons. To confirm, press the button. To exit the time/day mode wait 30 seconds or press the after selecting the day of the week. button 1.6. Main menu Press the button to access the main menu of your Kyros technology towel rail. You can move between the different options on the menu by pressing the and buttons. The submenu which you have selected will be highlighted with a frame. The following icons allow you to access different sub-menus which we will now explain: Configuration Sub-Menu Energy Sub-Menu Balance Function Programming Sub-Menu 11

12 KYROS Configuration sub-menu The configuration sub-menu consists of 4 technical parameters of the product. To access this menu, press on the main menu screen. The screen on the right will appear and we can move between the various options of the sub-menu by using the and buttons. We can access the various sub-menus, which we can now explain, using the following icons: Clear Memory Clear Memory Screen backlight Clear Memory Language Adjust day / time Screen backlight function This function allows you to change the brightness of the screen in the STAND-BY and BACKLIGHT (ON) modes. We can change between the 2 modes by using the and buttons. We can increase or decrease the brightness by using the and buttons. The cursor shows the intensity of the light within the range. Press the button to confirm and to exit. 12

13 Language You can select the language you wish using this function. Select the language you wish by pressing the and buttons. Press the button to confirm the language highlighted. LANGUAGE ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS Adjust date / time This function allows you to change the hour, minutes and day of the week on the product control panel. To adjust the time/date please revert to section Energy Sub-menu The Energy Sub-menu allows access to the functions relating to the energy management of the product. Select the icon from the main menu by using the and buttons. Press to access this screen. The following icons allow you to access distinct sub-menus: Open window function Two-hour Boost mode Effective power function Information 13

14 KYROS Open Window Function This option allows you to turn on or turn off the Open Window function. Select ON to activate it or OFF to desactivate it by using the and buttons. To confirm the desired option and exit, press the button. To learn more about this function please see section 1.7 of this manual. This function activates the Anti-Frost mode (7ºC) when the towel rail sensor detects a drop of at least 4ºC in 30 minutes. Two-hour Boost Mode This function sets the towel rail to work at maximum power, regardless of any other mode. This mode takes priority over any other. You can choose between 15 minutes, 30 minutes, 1 hour or 2 hours of maximum power work capacity. When the heated towel rail is set on the two-hour mode, the screen will show this image min min 1H 2H 14

15 Once the towel rail is set on this mode, and until the period of time haves finished or the key is pressed again, the display will show this image. Effective Power Function This function shows the working time and total time that the product has been connected on the main screen. The nominal and effective power will appear on the screen after 6 seconds without pushing any buttons. The effective power is the actual consumption of our product during the total time it is switched on. 15

16 KYROS Balance Sub-menu The balance sub-menu forces the towel rail to work in manual mode at a constant 19ºC. Select the icon from the main menu using the and buttons. Press the button to confirm. By pressing this button the towel rail will return to the main screen with a set temperature of 19ºC and the Manual icon will appear Programming sub-menu In this section we will explain the aspects of the towel rails in relation to how they work in their various functions and modes. The programming sub-menu provides access to the functions related to programming the product. Select the icon from the main menu. The icons shown below allow access to the distinct sub-menus which we will describe later: / Manual / Automatic Function Start Programming User Function Pilot Wire Mode (Only upon demande) What are the manual, automatic and pilot wire modes? 16

17 Manual Mode This mode allows you to change between comfort, eco and anti-frost modes changing the temperature as described in section 1.3. Automatic Mode This mode activates the programming which has been set in the towel rail. Pilot Wire Mode Not available in UK. Only upon demand This mode allows you to control the towel rail via a central control. What are the comfort, Eco and Anti-Frost modes? These modes represent different ranges of temperatures available within the products. Icon Mode Temperature Range Comfort From 19ºC to 30ºC Eco From 7.5ºC to 18.5ºC Anti-Frost 7ºC 17

18 KYROS Manual/Automatic Function Press the button to change between the Manual and Automatic modes. On the main screen the symbol will appear in Automatic mode and the symbol will appear in Manual mode. The Automatic Mode will activate the programming which you have already set in the product. Start Programming To start programming, use the and buttons to choose the icon and confirm by pressing the button. We must be in AUTOMATIC MODE. A screen for selecting one of the four initial programming or self programming 18

19 With keys and is exchanged between presets and programming custom home. With confirmed with key and screen appears with all 4 presets. 1 Select the COMFORT temperature Use the and keys to select the COMFORT temperature, between 19ºC and 30ºC. The symbol and the temperature will flash. Once selected, press to confirm. 2 Select the ECO temperature Continue and select the ECO temperature, between 7.5ºC and 18.5ºC. The symbol and the temperature will flash. Press to confirm. 3 Select DAYS After pressing the button, the days of the week will flash showing the days as Day1, Day 2 etc. We can use the and buttons to go forwards or backwards through the days. Press the button to select the day or days which you wish to program with the same programming. 19

20 KYROS 4 Asign mode to each HOUR To access the hourly programming of the chosen days press until you pass day number 7. You can move back and forward between the hours by using the and buttons. The hours are shown as 0h, 1h, 2h 12h By using the button you can chose between the COMFORT, ECO and OFF modes. Once the hours of the selected days have been programmed, press or wait 30 seconds without touching any button. You can program day by day or you can program several days at the same time. User Function To access the User Function, use the and buttons to select the icon and confirm by pressing. 20

21 USER Function This allows the user to establish a limited working temperature range (maximum and minimum temperature). By way of a 4 digit code you can access a menu where you can activate or deactivate this function, change the password and fix a maximum and minimum temperature range for the product When the product is working with this function one of the following symbols will appear on the main screen depending on whether it is in Automatic mode, Manual mode or Pilot Wire mode. Enter the PIN to access. The default PIN number is Select the numbers by using the and buttons and confirm by pressing. Press OK to access. If the pin number is wrong then the words INCORRECT PIN will appear on the screen. INSERT PIN CANCEL 0 OK INCORRECT PIN 21

22 KYROS When the PIN number has been entered correctly the main screen of the basic configuration will appear. The following icons allow access to the various sub-menus which we will now describe: Activate/ Deactivate Function Change Password Maximum Temperature Limit Minimum Temperature Limit Activate function Allows you to activate or deactivate the USER function. Select ON to activate or OFF to deactivate the function by using the and buttons. Once the chosen mode has been selected, press to select and exit. USER FUNCTION ON OFF The icon or will appear at the top of the screen depending whether it is on Automatic mode or Manual mode. If the product is in Pilot Wire Mode then the icon will appear. 22

23 Change the PIN code You can change the access PIN code for this feature. Use the,, and buttons. To introduce the current PIN code. To confirm select OK. The screen will show PIN CHANGED. NEW PIN CANCEL 0 OK PIN CHANGED Maximum temperature This allows you to set the maximum working temperature of the towel rail. Using the and buttons you can increase or reduce the temperature between 19ºC and 30ºC. Press to exit once the desired temperature has been chosen. 23

24 KYROS Minimum temperature This allows you to set the minimum working temperature of the towel rail. Using the and buttons you can increase or reduce the temperature between 7.5ºC and 18.5ºC. Press to exit once the desired temperature has been chosen. LOWER TEMPERATURE LIMIT 10.0ºC To exit, press the button or wait 30 seconds. Pilot Wire Function Not available in UK. Only upon demand Activate or deactivate the Pilot Wire Control function. Select ON to activate or OFF to deactivate by using the keys and. Press to confirm and exit. The symbol will appear on the screen. PILOT WIRE ON OFF WARNING! The Pilot Wire function only allows you to control your heating via the pilot wire programmer. 24

25 1.7. Open Window Function This function is activated when the towel rail sensor detects a drop of 4ºC in the set temperature within a period of half an hour. When this function is activated the image on the right will appear on the towel rail screen for 5 seconds: When the Open Window mode is activated, the towel rail will pass into Anti-Frost 7ºC mode. The following screen will appear on the towel rail screen indicating that the Anti-Frost mode has been activated. This mode will be active for 2 hours. If the button is pushed during this period of time then towel rail will switch off. You can switch the towel rail on again by pushing the and it will work without the Open Window function. button 2. Mounting Instructions Inside the box you will find a mounting kit. 1. Choose the right part of the wall. 2. Place the mounting stencil on the wall, marking the places for the holes. 3. Remove the stencil and make the holes in the wall. 25

26 KYROS 4. Insert the rawl plugs in the holes made. 5. Screw the plastic fastener to the wall with the 5.5 x 50 mm screw. 6. Screw the two brackets for supporting the heated towel rail and the plastic fastener to the horizontal tube of the heated towel rail like in Figure 1 with the 8 x 26 mm screw. 7. Insert what you have assembled in Section 6 into the plastic piece and fix well with the 5 x 12 mm screw. 8. Place the cover on the piece supporting the heated towel rail x 40 mm Rawl Plug 2 Bracket x 50 mm screw 4 5 x 12 mm screw 5 Bracket insert 6 Bracket head 7 8 x 26 mm screw 8 Cap 9 Towel Rail 26

27 3. Connecting Instructions Connection to the mains must be made observing the voltage stated on the product technical data label. This appliance is designed to be permanently installed connected to fixed facilities. The heated towel rail power supply circuit must have an all-pole circuit breaker switch with a separation of at least 3 mm between the contacts. The appliance must be installed, if possible, away from any source of draughts (windows, doors) or any other thing which may affect its functioning. In this way, the temperature will not be affected. Place any object which might prevent the air flow (furniture, armchairs) 50 cm away from the front of the appliance. The heater must never be installed immediately below a power point. The lower part of the control panel must be placed at least 15 cm from the floor. For any appliance, if the power cable is damaged, it must be replaced by a specific cable. The replacement of the cable must be done by the maker, its after-sales service or qualified personnel. The technical specifications of your appliance appear on the technical data label. OK 27

28 KYROS IMPORTANT This device must never be installed with its control panel at the top. This device must not be installed horizontally. During installation, use wedges so that the control panel will not be in contact with the floor KYROS Towel Rail technical characteristics. Figure 2. Measures and technical characteristics H1 H2 H1 H2 H1 H2 H1 H2 V3 V1 V2 V3 V3 V1 V2 V4 V4 V3 V1 V2 V4 V1 V4 V2 KTI030SE** KTI050SE** KTI075SE** KTI100SE** 28

29 REFERENCE H1 H2 V1 V2 V3 KTI030 *** 500 mm 300 mm 800 mm 640 mm 49 mm KTI050 *** 500 mm 300 mm 1,200 mm 1,040 mm 49 mm KTI075 *** 500 mm 300 mm 1,600 mm 1,360 mm 128 mm KTI100 *** 500 mm 300 mm 1,800 mm 1,360 mm 325 mm CODE MODEL POWER VOLTAGE HEIGHT WIDTH DEPTH INST. DEPTH WEIGHT KTI030SEB2 T.WHITE W 230V~ 800 mm 500 mm 50 mm 100 mm 11 kg KTI050SEB2 T.WHITE W 230V~ 1,200 mm 500 mm 50 mm 100 mm 15 kg KTI075SEB2 T.WHITE W 230V~ 1,600 mm 500 mm 50 mm 100 mm 22 kg KTI100SEB2 T.WHITE 100 1,000 W 230V~ 1,800 mm 500 mm 50 mm 100 mm 28 kg CODE MODEL POWER VOLTAGE HEIGHT WIDTH DEPTH INST. DEPTH WEIGHT KTI030SEM2 T.METALLIC W 230V~ 800 mm 500 mm 50 mm 100 mm 11 kg KTI050SEM2 T.METALLIC W 230V~ 1,200 mm 500 mm 50 mm 100 mm 15 kg KTI075SEM2 T.METALLIC W 230V~ 1,600 mm 500 mm 50 mm 100 mm 22 kg KTI100SEM2 T.METALLIC 100 1,000 W 230V~ 1,800 mm 500 mm 50 mm 100 mm 28 kg CODE MODEL POWER VOLTAGE HEIGHT WIDTH DEPTH INST. DEPTH WEIGHT KTI030SEC2 T.CHROME W 230V~ 800 mm 500 mm 50 mm 100 mm 11 kg KTI050SEC2 T.CHROME W 230V~ 1,200 mm 500 mm 50 mm 100 mm 15 kg KTI075SEC2 T.CHROME W 230V~ 1,600 mm 500 mm 50 mm 100 mm 22 kg KTI100SEC2 T.CHROME W 230V~ 1,800 mm 500 mm 50 mm 100 mm 28 kg 3.2. Specific Regulations for Bathrooms This device is in compliance with CLASS II safety regulations (double insulation). It can be installed in areas 2 and 3, position A and B whenever it observes the following regulations: In bathrooms, the towel rail must never be installed in such a way that the switches and other control devices may be touched by someone in the bathtub or having a shower. In a kitchen or bathroom, the body of the heated towel rail shall be placed at least 25 cm from the floor. It must not be earthed. 29

30 KYROS 4. Maintenance & Cleaning Thanks to the high standard of its materials and surface treatment, your heated towel rail is protected against corrosion. Don t use abrasive or corrosive products. Use a cloth with alcohol, taking the precaution to switch off the device beforehand. For the control panel, use a dry cloth (without any solvents) Safety This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be carried out by children without supervision. Children must be supervised at all times to ensure that they do not play with the product. 5. Guarantee 5.1. If you need to invoke the guarantee service, contact the dealer / installer where it was purchased. In the event of any problems, you can contact ROINTE on its TECHNICAL ASSISTANCE HELPLINE or us at support@rointe.co.uk 5.2. ROINTE guarantees this product is free from defects in materials, design and workmanship at the time of its purchase and for the immediately following period of 240 months regarding steel and leak-tightness, and 36 months for electric and electronic parts. 30

31 5.3. If during the guarantee period the heated towel rail fails to work properly, due to defects in design, materials or workmanship, ROINTE shall repair or replace the towel rail, whichever it considers to be more advisable, in the terms and conditions stated below: The guarantee shall only be covered if the original Certificate of Guarantee issued to the buyer by the dealer or installer is presented, and when the guarantee states the towel rail serial number and model (on the technical data label) and its date of purchase. ROINTE reserves the right to refuse the guarantee service when this information has been removed or changed following the original purchase of the product. Only the original receipt or invoice shall be accepted as proof of purchase when presented to the dealer or installer that sold the product The guarantee shall only be applicable to cases regarding defects in materials, design and workmanship, and shall never cover any damages due to the following: Incorrect use of the product for other than normal purposes or failure to observe the instructions given by ROINTE regarding the use and maintenance of the heated towel rail, as well as the installation or use of the product in a way that fails to comply with the applicable technical safety standards Repairs made by unauthorized repair shops or the opening of the heated towel rail by unauthorized persons Unforeseen circumstances beyond the control of ROINTE, such as lightning, fire, floods, public disorder, etc The repairs or replacements covered in this guarantee 31

32 KYROS do not permit any extension or new beginning of the guarantee period. The repairs or replacements covered in this guarantee shall be made with functionally equivalent reconditioned units. The faulty parts or pieces removed shall become the property of ROINTE This guarantee does not affect the buyer s statutory rights under the current national laws, or the buyer s rights against those of the dealer or installer arising from the contract of sale In the event of there being no national legislation applicable, this guarantee shall be the buyer s sole protection. ROINTE, its offices, dealers and installers shall not be held liable for any type of damages, whether fortuitous or accidental, arising from the failure to observe any of the regulations related with this product. European Directive 2012/19/UE Under the European Directive 2012/19/UE on waste electrical and electronic equipment (WEEE), the apparatus cannot be disposed in the usual council bins and containers. They must be separated to optimize the recovery and recycling of all of the components and materials and reducing the impact to human health and the environment. The symbol of the container crossed out over a horizontal line is marked on all of ROINTE s products to remind the consumer of the obligation to separate them on disposal. The consumer should contact the local authority or original point of sale to learn more about the correct disposal of this product. 32

33 Cut along the dotted line CERTIFICATE OF GUARANTEE In the event of detecting any defect in the product within the period of guarantee, you must fill in the following Guarantee Certificate and send it to us stamped together with a copy of the sales invoice via support@rointe.co.uk or to the following postal address: INDUSTRIAS ROYAL TERMIC, S.L., C/E, Parcela 43, Santomera (Murcia, Spain). CERTIFICATE OF GUARANTEE REFERENCE: Nº SERIES: USER: HOME ADDRESS: TOWN: POSTCODE: PROVINCE: COUNTRY: TELEPHONE: SELLER S STAMP: PURCHASE DATE: NB: This certificate of Guarantee must be filled in fully in order to obtain guarantee rights. The date of purchase and seller s stamp are compulsory. Please, attach a copy of your sales invoices. In addition, for new constructions include the Certificate of First Occupation.

34

35

36 ROINTE UK Catalyst House 720 Centennial Court, Centennial Park Elstree, Herts, WD6 3SY T F Technical Support T MKSUK16V1