Air-Pro Blue Polyethylene (PE) Compressed Air Piping System
|
|
|
- Alfred Lindsey
- 5 years ago
- Views:
Transcription
1 - Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR), Title 21, Chapter 1: Section determining suitability for contact with foodstuff. Meets Cal/OSHA requirements for transport of compressed air Pipe Production: Dimensions and tolerances shall exceed ISO requirement. Fitting Production: Dimensions and tolerances shall exceed ISO requirement. Pressure Rating: Components shall be pressure rated in accordance with ASTM D2837 and DIN 8077 for hydrostatic design basis. Components shall be manufactured to standard dimensional ratio (SDR) 7 & 11. Based on continuous service life of 50 years at 68º F (20º C). SDR7: 230psi (PN16) SDR11: 150psi (PN10) PN = Nominal pressure in bar. Joining: Available methods shall be according to the schedule below DVS Socket: 1/2" (20mm) through 4" (110mm) DVS Contact Butt: 1/2" (20mm) through max product size 247
2 s PIPE* 5 meter (16.4 ) lengths OD mm inch OD s Weight (lb/lth) Part Number 20 1/ / / / *Sold in 5m (16.4 ) lengths only. systems mm are blue. SDR 7.4 and rated at 230psi. 248
3 - Pipe & Fittings k s 90 DEGREE ELBOW z mm inch Z s k Part Number 20 1/ / / / s OD L3 90 DEGREE SWEEP ELBOW Z Size Dimensions SDR 7.4 / PN 16 / 230 PSI mm inch s Z L3 Weight (lbs) Part Number
4 - Fittings z k s 45 DEGREE ELBOW mm inch Z s k Part Number 20 1/ / / / Z L r Z L s 45 DEGREE SWEEP ELBOW - BUTT OD Size Dimensions SDR 7.4 / PN 16 / 230 PSI mm inch s z r L Weight (lbs) Part Number
5 - Fittings k s H L TEE - SOCKET mm inch L H s k Part Number 20 1/ / / / Z s OD L3 L TEE - BUTT Size Dimensions SDR 7.4 / PN 16 / 230 PSI mm inch s z L L3 Weight (lbs) Part Number
6 - Socket Fittings k s L REDUCING TEE mm inch L s k Part Number 25 x 20 3/4 x 1/ x 20 1 x 1/ x 25 1 x 3/ x /4 x 1/ x /4 x 3/ x /4 x x /2 x 1/ x /2 x 3/ x /2 x x /2 x 1-1/ x 25 2 x 3/ x 32 2 x x 40 2 x 1-1/ x 50 2 x 1-1/
7 - Socket Fittings STUB END* (FLANGE ADAPTER) mm inch L OD s k Part Number 20 1/ / / / *Requires backing ring. See page 282. s d4 OD d3 h L STUB END* (FLANGE ADAPTER) - BUTT Size Dimensions SDR 7.4 / PN 16 / 230 PSI mm inch s L d3 d4 h Weight (lbs) Part Number
8 - Socket Fittings COUPLING mm inch L OD ID S Part Number 20 1/ / / / END CAP mm inch OD L k Part Number 20 1/ / / / Large dimension is spigot end, small dimension is socket. 254
9 - Socket Fittings CONCENTRIC REDUCER mm inch L s k Part Number 25 x 20 3/4 x 1/ x 20 1 x 1/ x 25 1 x 3/ x /4 x 1/ x /4 x 3/ x /4 x x /2 x 1/ x /2 x 3/ x /2 x x /2 x 1-1/ x 25 2 x 3/ x 32 2 x x 40 2 x 1-1/ x 50 2 x 1-1/ x 63 3 x x 63 4 x x 90 4 x
10 - Socket Fittings MALE ADAPTER mm inch L s k t Part Number 20 1/ / / / Nickle plated brass threads. FEMALE ADAPTER mm inch L S k t Part Number 20 1/ / / / Nickel-plated brass threads 256
11 - Butt & Electrofusion Fittings s PIPE* 5 meter (16.4 ) lengths OD mm inch OD s Weight (lb/ft) Part Number *Sold in 5m (16.4 ) lengths only. systems mm are black, SDR 11 and rated at 150psi. l3 90 DEGREE ELBOW r z mm inch z r l3 Part Number
12 - Butt & Electrofusion Fittings z L 45 DEGREE ELBOW mm inch z L Part Number H L3 L TEE mm inch L H L3 Part Number
13 - Butt & Electrofusion Fittings REDUCING TEE mm inch L H l1 l2 Part Number 160 x 63 6 x x 90 6 x x x x 63 8 X x 90 8 X x x x x x x x x x x x x x x x x CONCENTRIC REDUCER mm inch L l1 l2 Part Number 160 x x x x x x x x x x x x
14 - Butt & Electrofusion Fittings STUB END* (FLANGE ADAPTER) mm inch OD L l1 l2 Part Number *Requires backing ring. See page 388. L ELONGATED END CAP mm inch L Part Number
15 - Socket Fusion Valves ELECTROFUSION TAPPING SADDLE mm inch H H1 Part Number 63 x 20 2 X 1/ x 32 2 x x 40 2 X 1-1/ x 63 2 X x 32 3 x x 63 3 x x 20 4 X 1/ x 32 4 x x 40 4 X 1-1/ x 63 4 x x 20 6 X 1/ x 32 6 x x 40 6 X 1-1/ x 63 6 x x 63 8 X x X x X pipe electrofusion saddles are rated at 150psi. Requires use of Polymatic electrofusion welding machine. 261
16 - Socket Fusion Valves TAPPING SADDLE WITH VALVE mm inch L H H1 Part Number 63 x 32 2 x x 40 2 X 1-1/ x 50 2 X 1-1/ x 63 2 X x 32 3 x x 40 3 x 1-1/ x 50 3 X 1-1/ x 63 3 X x 32 4 x x 40 4 X 1-1/ x 50 4 X 1-1/ x 63 4 x x 32 6 x x 40 6 X 1-1/ x 50 6 X 1-1/ x 63 6 x x 32 8 X x 40 8 X 1-1/ x 50 8 X 1-1/ x 63 8 X x X pipe electrofusion saddles are rated at 150psi. Requires use of Polymatic electrofusion welding machine. 262
17 - Socket Fusion Valves SPIGOT GOOSENECK FAUCET mm inch L S k t Part Number 20 1/ /
18 - Socket Fusion Valves B H d S D H1 BALL VALVE - NEW M1 STYLE w/ Mounting Pads* Size Dimensions Weight SDR 7 / PN 16 / 230 PSI mm inch L b H H1 Lbs Part Number 20 1/ / / / * Available after original style is depleted. BALL VALVE - ORIGINAL STYLE ( BEING DISCONTINUED*) mm inch L H b S Part Number 20 1/ / / / *While supplies last. ball valves sizes 20-63mm are rated 230psi. 264
19 - Butt Fusion Valves PE BALL VALVE WITHOUT GEAR Size Dimensions SDR 11 / PN 10 / 160 PSI mm inch L L1 L3 h S Part Number / PE BALL VALVE WITH GEAR* Size Dimensions SDR 11 / PN 10 / 160 PSI mm inch L L1 L3 h S Part Number
ContainTech Polypropylene Dimensional Data Expertise in Engineered Plastics Dated
ContainTech Dimensional Data Expertise in Engineered Plastics Dated 3-17-11 Table of Contents Cap... 23 Clean Out... 22 Combo Lateral ( Sanaitry Tee)... 16 Elbow: 90... 9 Elbow: 45... 10 End Seal... 3
PVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
Unitary Construction Double Wall Piping System
Unitary Construction Double Wall Piping System 221 Page intentionally left blank 222 Co-Extruded Double Containment Chem Proline Black PE Resin Crack resistant proprietary resin formulation Excellent abrasion
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Viega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
PRICE LIST. PE100 Metric. 1 May Electrofusion & Spigot Piping Systems SDR 11 ELECTROFUSION COUPLERS SDR 17 ELECTROFUSION COUPLERS IPA WIPES
109 PRICE LIST 1 May 2018 Electrofusion & Spigot Piping Systems Quality and Standards Plastic Systems is a leading distributor of PE piping systems in New Zealand and carries a comprehensive range of fittings
Spears FlameGuard CPVC SDR 13.5 Pipe and Schedule 40 and 80 fittings
Plastic Pipe and Fittings Plastic pipe and fittings are FM Approved for aboveground wet pipe fire protection systems for Light Hazard Occupancy sprinkler systems only. Except where noted otherwise, all
PRICE LIST. PE100 Metric. 1 June Electrofusion & Spigot Piping Systems SDR 17 ELECTROFUSION COUPLERS SDR 11 ELECTROFUSION COUPLERS IPA WIPES
119 PRICE LIST 1 June 2016 Electrofusion & Spigot Piping Systems Quality and Standards Plastic Systems is a leading distributor of PE piping systems in New Zealand and carries a comprehensive range of
Duo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
bar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4" 12" Fabricated in Sizes 15" 36"
eavy Wall Gasketed Sewer Fittings SDR Injection Molded in Sizes " " Fabricated in Sizes " " With a.% thicker wall than SDR and high impact retention ring, Royal Building Product s PVC eavy Wall Gasketed
Water Distribution Products. Price List - June 1, 2010
Water Distribution Products Price List - June 1, 2010 2 Elster Perfection Elster Perfection Hydrosert PE Water Fittings Products Hydrosert Mechanical Couplings Hydrosert Elbows 61025 3/4 CTS SDR 9 25 $
SCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings
Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a
SOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
Series P. Solvent Weld Sewer Fittings SDR 35. Solvent Weld Sewer Fittings SDR 35 P Series
Solvent ITEM Weld INCHES NUMBER Sewer QTY Fittings QTY PRICE SDR ITEM 35 INCHES NUMBER QTY QTY PRICE Injection Molded in Sizes 3 12 Fabricated in Sizes 10 27 page 27 Phone: 586-781-2700 Toll Free: 1-800-232-5690
Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3" 12" Fabricated in Sizes 10" 36"
Solvent Weld Sewer Fittings SDR 5 Injection Molded in Sizes " " Fabricated in Sizes 0" " Applications Royal Building roducts has the broadest product offering of Solvent Weld Sewer fittings in the industry.
Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36
Solvent Weld Sewer Fittings SDR 5 Injection Molded in Sizes Fabricated in Sizes 0 Applications Royal Building roducts has the broadest product offering of Solvent Weld Sewer fittings in the industry. They
CH-PVDF RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS. Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov.
RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS CH-PVDF-1115 Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov. 25, 2013 Suggested list prices subject to change without notice. UPC
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
CLASS 150. Investment Cast Stainless Steel Threaded End Fittings
Investment Cast Stainless Steel Threaded End Fittings Covering sizes from /8 to, DIE ERSTE manufactures and supplies the highest quality investment cast stainless steel threaded end fittings. In this series,
Stainless Steel Parts & Accessories Catalog NOVEMBER 2017
Stainless Steel Parts & Accessories Catalog NOVEMBER 2017 www.airnet-system.com TABLE OF CONTENTS PIPING PIPE 304L... 3 PIPE 316L... 3 FITTINGS QUICK DROP... 4 SWAN NECK... 4 ELBOW 45... 4 ELBOW 90...5
Electrofusion Fittings
Electrofusion Fittings QUESTIONS ABOUT PE? PLASSON HAS THE ANSWERS. Plasson s pedigree in PE reaches back 40 years internationally and over 30 years locally. It is the only company in Australia focused
Type Electrically Actuated 3-way Ball Valves
GF Piping Systems Electrically Actuated 3-way Ball Valves Type 167-17 General Size: ⅜ 2 aterial: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPD, FP End Connection: Solvent
standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
STUB FLANGES & BACKING RINGS
ECHNICAL DAA Standards: Range: DN 20 DN 1200 Materials: AS/NZS 4129 PE Fittings - Flanged Stub Flanges - AS/NZS 4131 PE100 Polyethylene materials Backing Rings - AS/NZS 4331.1 Metallic Flanges (ISO 7005-1)
BLACK & GALVANIZED SCH 40 STEEL NIPPLES
BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
PNEUMATIC TUBING FITTING
2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes
PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
Pipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
WITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
Sam Roberts & Associates, Inc. South Texas 3300 Capitol Houston, Texas Fax:
Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36 P Applications Plastic Trends has the broadest product offering of Solvent Weld Sewer fittings in the industry.
Technical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
Sincerely, Your Partners at Specified Fittings
N W E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
Technical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
Rosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual 00809-0100-4828, Rev BA Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before
Tech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
Quick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems
Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10
Third Party Tested. Sam Roberts & Associates, Inc.
Perfect Fit Solvent Weld DWV Fittings Injection Molded in Sizes 4 12 Fabricated in Sizes 10 24 D Applications The most complex installations require the most advanced fittings. Injection molded Perfect
Rosemount 1595 Conditioning Orifice Plate
Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing Why Gardner Denver? Simply stated There is no equal Quick-Lock from Gardner Denver has taken piping systems to a new level. Without compromising any structural
WELDBEND CARBON STEEL WELDING FITTINGS
070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71
Wrot and Cast Pressure Fittings
Wrot and Cast Pressure Fittings 600 Series Wrot 700 Series Cast Adapters................................................ 6-8 Air Chambers............................................. 8 Bulkhead Fittings..........................................
Viega Pexcel Water System
Viega Pexcel Water System PAGE 57-1 ViegaPEX Ultra ViegaPEX Ultra is manufactured to ASTM F876/F877 standards and listed to ANSI/ NSF Standards 14 and 61. It is chlorine resistance rated for both traditional
Rosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before working with the product.
90 Elbows Long Radius
90 Elbows Long Radius DN O.D. Center SCH STD SCH XS SCH XXS SCH 10 SCH 20 SCH 30 SCH 40 SCH 60 SCH 80 SCH 100 SCH 120 SCH 160 Inch mm to End Thickness Weight Thickness Weight Thickness Weight Thickness
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214 TABLE OF CONTENTS PEX PIPE page category SUPERPEX ultra resistant potable water pipe 3 C-54 OXYPEX oxygen barrier radiant
General Characteristics DM 80 Series - JIS Metric Tube
General haracteristics DM 80 Series - JIS Metric Tube Introduction Fitting Material Specifications K = Stainless Steel G = arbon Steel = opper Nickel 70/30 = opper Nickel 90/10 D = Duplex Z = Super Duplex
Pak Arab HDPE-100 Pipe
Pak Arab DPE-100 Pipe 20 mm to 630mm PN (4, 6.3, 8, 10, 12.5, 16, 20, 25, 32) DPE (igh density Polyethylene ) igh-density polyethylene (DPE) has a density that ranges from 0.94 to 0.97 g/cm3 (0.62 to 0.64
PVC DWV Drain Waste Vent Fittings
DWV Standards PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Contact Spears for any information not found. Page 983 Suitable for low pressure air handling 5 psi, not for distribution of compressed
PE PIPE & FITTINGS LDPE PIPE
LDPE PIPE All LDPE pipe is made with 100% virgin material ECO LDPE is made with 100% re-grind virgin material Pipes rated at 4 bar at 20 0 C No 2 for years All LDPE pipe is made and tested in our own factory
CPVC Hot and Cold Water System
CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard
UNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
PRK. Plastic pipe couplings Suitable for PEL, PEH and PEM pipes
PRK Plastic pipe couplings Suitable for PEL, PEH and PEM pipes IMI TA / Couplings / PRK PRK This plastic pipe coupling is suitable for PEL, PEH and PEM pipes and can be used both above and underground.
BUS CONNECTORS. Standard & EHV to 765 KV
BUS CONNECTORS Standard & EHV to 765 KV dmcpower.com 888-swage-now BUS CONNECTOR SYSTEM Faster, More Reliable Bus Installations If installation speed, quality, safety and total project cost is important
Water Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
PE Electrofusion Systems for Gas and Water Catalog
PE Electrofusion Systems for Gas and Water Catalog I S S U E D A T E : J A N U A R Y 2 0 1 7 PE ELECTROFUSION SYSTEMS For Gas and Water Applications TABLE OF CONTENTS Genesis F3 Electrofusion Processor............................................
15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
Non-Drip Quick Connect Couplings
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG EFFECTIVE
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 4-15-13 SUPERDUCT PVC DUCT PIPE Part No. Size O.D. Wall Std. Length List Price Per Ft. List Price Per Ft. Extruded 10 ft. 20 ft. 1033-PP-02
Section 1. Schedule 80 PVC Piping System. Pipe and Fittings Sizes ¼" to 16"
Section Schedule 80 PVC Piping System Pipe and Fittings s ¼" to 6" Effective September 27, 200 Glossary FP = Female Pipe hread MP = Male Pipe hread S = apered Socket SPG = Spigot End (same dimension as
Dimensional Guide. PP-Pure Pigmented Polypropylene. da (OD) OD 1
AAHI/AMERICA Dimensional Guide EFFECTIVE: 3/01/09 Dimensional Guide da (OD) 1 3 r Z OD 1 OD 2 da(od) 1 2 35 Green treet, PO Box 653, Malden, MA 02148 Tel: (781) 321-5409 - Toll Free: (800) 343-3618 - Fax:
Insertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
a World of Connection PLASSIM FITTINGS
PLASSIM FITTINGS C A T A L O G U E Water Distribution 2 Irrigation 12 Telecom 22 Box sizes 27 x 18 x 24 cm A-2 x 28 x 24 cm A-3 48 x 33 x 24 cm A-4 51 x 41 x 41 cm A-5 48 x 33 x 27 cm A-6 51 x 41 x 41
USA Whole Price List
USA Whole Price List Tips & Tricks How to Use the BMI Parts Catalog 1. Using the Table of Contents This reference page not only provides a listing of price lists and page numbers, it also links to each
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
GEMÜ 723 Motorized ball valve
Motorized ball valve Features High flow rates Low weight Choice of various body materials and connection types Available as shut off or control valve / and /-way versions available The / and/or /-way ball
D ISCONNECTS Q UICK. Autolok Quick Disconnects. Kamlok Quick Disconnects
Q UICK D ISCONNECTS Autolok Quick Disconnects Kamlok Quick Disconnects Q UICK D ISCONNECTS OPW Engineered Systems offers a comprehensive line of quick disconnect products, including Autolok and the world
Temperature sensors and accessories for heat and cooling measurement points
Temperature sensors and accessories for heat and cooling measurement points Applications Temperature sensors are metrological components for heat or cold measuring points. They are used in pairs and measure
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
Hello MLC Goodbye copper.
Hello MLC Goodbye copper. The multi-layered plumbing system with multiple benefits For more information visit www.uponor.com The multi-layered plumbing system with multiple benefits MLC Press-Fit is the
UltraGrip PE & PVC Connections & Repairs
Next Generation UltraGrip PE & PVC Connections & Repairs NOW AVAILABLE UP TO DN600 PIONEERS IN PIPE SOLUTIONS UltraGrip Overview Ideal for PE & PVC Pipe Connections & Transitions Pipe Materials UltraGrip
Civil Product Catalogue
Civil Product Catalogue For the most up-to-date pricing and information, please Contact us on 0800 000 546 or email sales@plasticsystems.co.nz ALBANY Ph: (64) (9) 477 2320 Fx: (64) (9) 477 2328 sales@plasticsystems.co.nz
PD2CAEPIPE - Plant Design-to-CAEPIPE Translator
PD2CAEPIPE - Plant Design-to-CAEPIPE Translator (for converting PCF files) 1.0 Installing Program To install PD2CAEPIPE on Windows NT, load the product CD supplied by InfoPlant and run the program "SETUP.EXE"
Thermal Mass Flowmeter Sensyflow FMT200-D
Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring
Pipe fittings and flanges, sockets for bayonet locks
Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
Radiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0317)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0317) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0118)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
Clamps with RUBBER BUSHING
Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example
COPPER NICKEL FORGED AND MACHINED FITTINGS
adaptors in copper nickel butt welding ends x female thread ØD1 x ØE mm ØE L A.A/f weight (NPT) mm mm Kg/piece 0.38 x 0.5 16 x 20 1/2" 34 27 0.07 0.5 x 0.75 20 x 25 3/4" 37 32 0.1 0.75 x 0.75 25 x 25 3/4"
PP-R AND PP-RCT PRESSURE PIPE SYSTEMS
PP-R AND PP-RCT PRESSURE PIPE SYSTEMS PESTAN WORLDWIDE - PP- RCT PIPES AND FITTINGS PESTAN consistently produces the most advanced plas@c piping systems made from Polypropylene (PP- R and PP- RCT), Polyethylene
SCHEDULE 40 PVC. List Prices
SCHEDULE 40 PVC List Prices Effective: November 14, 2005 Tee 401-003 3/8 100 1.99 401-005 0.64 401-007 0.73 401-010 1 50 1.38 401-012 1 1 /4 25 2.15 401-015 1 1 /2 25 2.61 401-020 2 25 3.80 401-025 2 1
Adapter system for measuring instruments with G1 hygienic connection Model process adapter
Accessories Adapter system for measuring instruments with G1 hygienic connection Model 910.61 process adapter WIKA data sheet AC 09.20 Applications Food, beverage and pharmaceutical industry Cosmetics
Kamlok Series. The World s Most Popular Cam and Groove Quick Disconnect
Kamlok Series The World s Most Popular Cam and Groove Quick Disconnect OPW Engineered Systems Kamlok Quick Disconnects are the industry standard in cam and groove couplers for safety and ease of use. All
Item 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
Terms And Conditions Of Sale
N E S Specified Fittings E S Washington Location Specified Fittings 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location Specified Fittings 483 Airport
This is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
PE Electrofusion Systems for Water Catalog
PE Electrofusion Systems for Water Catalog E L E C T R O F U S I O N S Y S T E M S PE ELECTROFUSION SYSTEMS For Water Applications IPEX PE ELECTROFUSION SYSTEMS FOR WATER The smarter, more reliable way
per metre (Kg) 20mm 0.85
Dia Dia ROUND BAR machining 4 0.09 6 0. 8 0.9 6 0.26 2 0.4 9 6 0.4 8 0.4 6mm 0.4 6 0.6 4 0. 20mm 0.8 6 0.9 8.0. 8.4 4 2. 6 2.48 8 2.60 mm 2.6 2.09 40mm.2 8.6 4 4.2 8 4.8 2.49 2 8 6.20 2 4 6.9 2 8. 2 2
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid