PRICE LIST. PE100 Metric. 1 May Electrofusion & Spigot Piping Systems SDR 11 ELECTROFUSION COUPLERS SDR 17 ELECTROFUSION COUPLERS IPA WIPES

Transcription

1 109 PRICE LIST 1 May 2018 Electrofusion & Spigot Piping Systems Quality and Standards Plastic Systems is a leading distributor of PE piping systems in New Zealand and carries a comprehensive range of fittings and equipment, backed by technical advice and service. The fittings listed comply with internationally accepted standards including AS/NZS Standard 4129:2000, Fittings for polyethylene (PE) pipes for pressure applications. Specifying authorities are advised to require compliance with product standards to ensure the integrity of permanent works. Plastic Systems recommend that the installation of all polyethylene pipe fittings, only be undertaken by suitably qualified and experienced operators. Related Documents APS Fabrication Flyer Simona Swept Bends Flyer Compression Fittings Price List +GF+ WAGA Mechanical Couplers Price List Welding Machines, Tooling & Accessories Price List SDR 11 ELECTROFUSION COUPLERS COUPLER FPEHC/ PN16 SDR 11 FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ FPEHC/ *Larger sizes FPEHC/ avilable on request FPEHC/ SDR 7.4 ELECTROFUSION COUPLERS COUPLER FPE7.4HC/ PN25 SDR 7.4 FPE7.4HC/ FPE7.4HC/ FPE7.4HC/ FPE7.4HC/ FPE7.4HC/ FPE7.4HC/ FPE7.4HC/ FPE7.4HC/ FPE7.4HC/ FPE7.4HC/ *Larger sizes FPE7.4HC/ avilable on request SDR 17 ELECTROFUSION COUPLERS COUPLER FPE17HC/ PN10 SDR 17 FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ FPE17HC/ *Larger sizes FPE17HC/ avilable on request FPE17HC/ IPA WIPES CODE: SIZE PRICE IPA Wipes IPAWIPES 100 per tub 100% IPA IPA LIQUID CODE: SIZE PRICE IPA Cleaner IPA/1LT 1 Litre 100% IPA PE Fusion PRICES INDICATED DO NOT INCLUDE GST Asmuss Plastic Systems Limited FREEPHONE: Facsimile: (64) (9) sales@plasticsystems.co.nz 34 Arrenway Drive, North Shore City 0632 P.O. Box , North Shore City 0745, Auckland, NZ Pipe Fittings Valving Measurement & Control

2 110 Electrofusion Fittings ELECTROFUSION TEES 90 DEG. EQUAL TEE FPEHCT/ PN16 SDR 11 FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ FPEHCT/ ELECTROFUSION END CAPS END CAP FPEHCCAP/ COUPLER FPEHCCAP/ PN16 SDR 11 FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ FPEHCCAP/ ELECTROFUSION REDUCING TEES 90 DEG. FPEHCRT/050X040 50x REDUCING TEE FPEHCRT/063X050 63x PN16 SDR 11 FPEHCRT/090X063 90x FPEHCRT/110X x FPEHCRT/110X x FPEHCRT/125X x FPEHCRT/125X x FPEHCRT/160X x FPEHCRT/160X x FPEHCRT/160X x FPEHCRT/180X x FPEHCRT/180X x FPEHCRT/200X x FPEHCRT/200X x FPEHCRT/225X x FPEHCRT/225X x FPEHCRT/250X x FPEHCRT/250X x ELECTROFUSION REDUCING COUPLERS REDUCING FPEHCR/025X x COUPLER FPEHCR/032X x PN16 SDR 11 FPEHCR/032X x FPEHCR/040X x FPEHCR/050X x FPEHCR/050X x FPEHCR/063X x FPEHCR/063X x FPEHCR/063X x FPEHCR/075X x FPEHCR/090X x FPEHCR/090X x FPEHCR/090X x FPEHCR/110X x FPEHCR/110X x FPEHCR/125X x FPEHCR/125X x FPEHCR/160X x FPEHCR/160X x FPEHCR/160X x FPEHCR/180X x ELECTROFUSION FLEX RESTRAINTS FLEX RESTRAINT FPEHCFLEX *Special tool required for installation Full Bore Polyvalves VPEHFB/025 25mm VPEHFB/032 32mm VPEHFB/050 50mm VPEHFB/063 63mm VPEHFB/090 90mm VPEHFB/ mm FULL BORE POLYVALVES REDUCED BORE POLYVALVES Reduced Bore Polyvalves VPEH/ mm VPEH/ mm

3 111 Electrofusion Fittings ELECTROFUSION 90 ELBOWS 90 DEG. ELBOW FPEHCEL90/ PN16 SDR 11 FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ FPEHCEL90/ ELECTROFUSION ADJUSTABLE ELBOWS ADJUSTABLE FPEHCELADJ/ ELBOW FPEHCELADJ/ COUPLERS FPEHCELADJ/ PN16 SDR 11 FPEHCELADJ/ FPEHCELADJ/ FPEHCELADJ/ FPEHCELADJ/ FPEHCELADJ/ Suitable for welding at any angle of ±12 per side ELECTROFUSION 45 ELBOWS 45 DEG. ELBOW FPEHCEL45/ PN16 SDR 11 FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ FPEHCEL45/ ADJUSTABLE FPEHCELSDJSP/ ELBOW 1 SIDED FPEHCELSDJSP/ COUPLER/SPIG FPEHCELSDJSP/ PN16 SDR 11 FPEHCELSDJSP/ FPEHCELSDJSP/ FPEHCELSDJSP/ FPEHCELSDJSP/ PE Fusion ELECTROFUSION 22 ELBOWS 22 DEG. ELBOW FPEHCEL22/ PN16 SDR 11 FPEHCEL22/ FPEHCEL22/ FPEHCEL22/ FPEHCEL22/ Suitable for welding at any angle of ±12 one side PRICES INDICATED DO NOT INCLUDE GST

4 112 Electrofusion Saddles ELECTROFUSION TAPPING SADDLES TAPPING SADDLE FPEHUTS/040X x UNDERCLAMP FPEHUTS/040X x PN16 SDR 11 FPEHUTS/050X x FPEHUTS/050X x FPEHUTS/050X x FPEHUTS/063X x FPEHUTS/063X x FPEHUTS/063X x FPEHUTS/063X x FPEHUTS/063X x FPEHUTS/063X x FPEHUTS/075X x FPEHUTS/075X x FPEHUTS/075X x FPEHUTS/075X x FPEHUTS/075X x FPEHUTS/090X x FPEHUTS/090X x FPEHUTS/090X x FPEHUTS/090X x FPEHUTS/090X x FPEHUTS/110X x FPEHUTS/110X x FPEHUTS/110X x FPEHUTS/110X x FPEHUTS/110X x FPEHUTS/125X x FPEHUTS/125X x FPEHUTS/125X x FPEHUTS/125X x FPEHUTS/125X x FPEHUTS/140X x FPEHUTS/140X x FPEHUTS/140X x FPEHUTS/140X x FPEHUTS/160X x FPEHUTS/160X x FPEHUTS/160X x FPEHUTS/160X x FPEHUTS/160X x FPEHUTS/180X x FPEHUTS/180X x FPEHUTS/180X x FPEHUTS/180X x FPEHUTS/180X x FPEHUTS/200X x FPEHUTS/200X x FPEHUTS/200X x FPEHUTS/200X x FPEHUTS/200X x FPEHUTS/225X x FPEHUTS/225X x FPEHUTS/225X x FPEHUTS/225X x FPEHUTS/225X x FPEHUTS/250X x FPEHUTS/250X x FPEHUTS/250X x FPEHUTS/250X x FPEHUTS/250X x ELECTROFUSION BRANCH SADDLES CODE: SIZE (OD) PN PRICE (BAR) TAPPER SWIVEL TEE PLTAP/063X x METRIC PE PLTAP/125X x PLTAP/180X x Refer to our Compression Fittings price list for other sizes. BRANCH SADDLE FPEHUBS/063X x UNDERCLAMP FPEHUBS/063X x SPIGOT FPEHUBS/063X x OFF TAKE FPEHUBS/063X x PN16 SDR 11 FPEHUBS/075X x FPEHUBS/075X x FPEHUBS/075X x FPEHUBS/075X x FPEHUBS/090X x FPEHUBS/090X x FPEHUBS/090X x FPEHUBS/090X x FPEHUBS/090X x FPEHUBS/110X x FPEHUBS/110X x FPEHUBS/110X x FPEHUBS/110X x FPEHUBS/110X x FPEHUBS/125X x FPEHUBS/125X x FPEHUBS/125X x FPEHUBS/125X x FPEHUBS/125X x FPEHUBS/140X x FPEHUBS/160X x FPEHUBS/160X x FPEHUBS/160X x FPEHUBS/160X x FPEHUBS/160X x FPEHUBS/180X x FPEHUBS/180X x FPEHUBS/180X x FPEHUBS/180X x FPEHUBS/180X x FPEHUBS/200X x FPEHUBS/200X x FPEHUBS/225X x FPEHUBS/225X x FPEHUBS/250X x FPEHUBS/250X x COMPRESSION TAPPING SADDLES TAPPING SADDLE TOOLS ALLEN KEY FOR TAPPING SADDLE CODE: PLASSONKEY/12MM PRICE

5 113 Electrofusion Saddles TOPLOAD BRANCH SADDLES SPIGOT OFF TAKE SDR11 CODE: SIZE (OD mm) SDR PRICE FPEHTLBS/ X x FPEHTLBS/ X x FPEHTLBS/ X x FPEHTLBS/ X x FPEHTLBS/ X x FPEHTLBS/400X x FPEHTLBS/ X x FPEHTLBS/ X x FPEHTLBS/ X x FPEHTLBS/ X x FPEHTLBS/450X x FPEHTLBS/450X x FPEHTLBS/ X x FPEHTLBS/500X x FPEHTLBS/560X x FPEHTLBS/560X x FPEHTLBS/630X x FPEHTLBS/630X x FPEHTLBS/710X x FPEHTLBS/710X x FPEHTLBS/710X x FPEHTLBS/800X x FPEHTLBS/800X x FPEHTLBS/800X x WASTE WATER SADDLES FIXED 225MM 90DEG OFF TAKE CODE: SIZE (OD mm) SDR PRICE FPEHWWTLBS/ X x FPEHWWTLBS/ X x FPEHWWTLBS/ X x Rated to PN10 *Topload tool & cutter required for installation WASTE WATER SADDLES FIXED 110MM 45DEG OFF TAKE Rated to PN16 *Topload tool & cutter required for installation CODE: SIZE (OD mm) SDR PRICE FPEHWYEBS/ X x FPEHWYEBS/ X x TOPLOAD BRANCH SADDLES BSP BRASS FEMALE OFF TAKE SDR11 CODE: SIZE (OD mm) SDR PRICE FPEHTLBTS/ X x FPEHTLBTS/ X x Rated to 0.5bar *Topload tool & cutter required for installation PE Fusion Rated to PN16 *Topload tool & cutter required for installation WASTE WATER SADDLE ADJUSTABLE 160MM OFF TAKE CODE: SIZE (OD mm) SDR PRICE FPEHWWBSAD/ X x FPEHWWBSAD/ X x FPEHWWBSAD/ X x TOPLOAD TOOLS AND CUTTERS NOTE: Approved top loading tools and cutters must be used when installing saddles. These can be purchased or hired from Plastic Systems. Please contact our sales team for further information. Rated to 0.5bar *Topload tool & cutter required for installation PRICES INDICATED DO NOT INCLUDE GST

6 114 Electrofusion Transition Fittings ELECTROFUSION BRASS TRANSITION COUPLINGS (mm x inch) TRANSITION FPEHMBA/020X1/2 20 x ½ 7-11 COUPLING FPEHMBA/025X3/4 25 x ¾ 7-11 MALE BRASS FPEHMBA/032X1 32 x BSP OUTLET FPEHMBA/032X11/4 32 x 1¼ 7-11 PN16 SDR 11 FPEHMBA/040X1 40 x FPEHMBA/040X11/4 40 x 1¼ 7-11 FPEHMBA/040X11/2 40 x 1½ 7-11 FPEHMBA/050X11/2 50 x 1½ 7-11 FPEHMBA/050X2 50 x FPEHMBA/063X11/4 63 x 1¼ 7-11 FPEHMBA/063X11/2 63 x 1½ 7-11 FPEHMBA/063X2 63 x FPEHMBA/075X2 75 x FPEHMBA/075X21/2 75 x 2½ 7-17 SPIGOT BRASS TRANSITION ADAPTORS (mm x inch) TRANSITION FPEHFBASP/020X1/2 20 x ½ 7-11 ADAPTOR FPEHFBASP/025X3/4 25 x ¾ 7-11 FEMALE FPEHFBASP/032X3/4 32 x ¾ 7-11 BRASS FPEHFBASP/032X1 32 x SPIGOT FPEHFBASP/032X11/2 32 x 1½ 7-11 FPEHFBASP/040X1 40 x FPEHFBASP/040X11/4 40 x 1¼ 7-11 FPEHFBASP/040X11/2 40 x 1½ 7-11 FPEHFBASP/050X11/2 50 x 1½ 7-11 FPEHFBASP/050X2 50 x FPEHFBASP/063X11/2 63 x 1½ 7-11 FPEHFBASP/063X2 63 x TRANSITION FPEHFBA/020X1/2 20 x ½ 7-11 COUPLING FPEHFBA/025X3/4 25 x ¾ 7-11 FEMALE BRASS FPEHFBA/032X1 32 x BSP OUTLET FPEHFBA/040X11/4 40 x 1¼ 7-11 PN16 SDR 11 FPEHFBA/050X11/2 50 x 1½ 7-11 FPEHFBA/050X2 50 x FPEHFBA/063X11/2 63 x 1½ 7-11 FPEHFBA/063X2 63 x TRANSITION FPEHMBASP/020X1/2 20 x ½ 7-11 ADAPTOR FPEHMBASP/025X3/4 25 x ¾ 7-11 MALE FPEHMBASP/032X1 32 x BRASS FPEHMBASP/032X1/2 32 x ½ 7-11 SPIGOT FPEHMBASP/032X11/2 32 x 1½ 7-11 FPEHMBASP/032X11/4 32 x 1¼ 7-11 FPEHMBASP/032X3/4 32 x ¾ 7-11 FPEHMBASP/040X1 40 x FPEHMBASP/040X11/4 40 x 1¼ 7-11 FPEHMBASP/040X11/2 40 x 1½ 7-11 FPEHMBASP/040X2 40 x FPEHMBASP/050X1 50 x FPEHMBASP/050X11/4 50 x 1¼ 7-11 FPEHMBASP/050X11/2 50 x 1½ 7-11 FPEHMBASP/050X2 50 x FPEHMBASP/063X11/4 63 x 1¼ 7-11 FPEHMBASP/063X11/2 63 x 1½ 7-11 FPEHMBASP/063X2 63 x FPEHMBASP/075X2 75 x FPEHMBASP/075X2/12 75 x 2½ 7-11 ELECTROFUSION STAINLESS STEEL TRANSITION ADAPTORS (mm x inch) TRANSITION FPEHMSA/040X11/4 40 x 1¼ 7-11 COUPLING FPEHMSA/050X11/2 50 x 1½ 7-11 MALE ST STEEL FPEHMSA/063X11/2 63 x 1½ 7-11 BSP OUTLET FPEHMSA/063X2 63 x PN16 SDR 11 SPIGOT PE TRANSITION ADAPTOR (mm x inch) SPIGOT PE FPEHNIPTLS/025X3/4 25 x ¾ 7-11 TRANSITION FPEHNIPTLS/032X1 32 x ADAPTOR FPEHNIPTLS/040X1 40 x PN16 SDR 11 FPEHNIPTLS/040X11/4 40 x 1¼ 7-11 FPEHNIPTLS/040X11/2 40 x 1½ 7-11 FPEHNIPTLS/050X11/2 50 x 1½ 7-11 FPEHNIPTLS/063X11/2 63 x 1½ 7-11 FPEHNIPTLS/063X2 63 x

7 115 SDR11 Spigot Fittings LONG SPIGOT STUB FLANGES LONG SPIGOT 22º ELBOWS PE100 SDR11 FPEHSF/025 25mm LONG SPIGOT FPEHSF/032 32mm STUB FLANGE FPEHSF/040 40mm FPEHSF/050 50mm FPEHSF/063 63mm FPEHSF/075 75mm FPEHSF/090 90mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm FPEHSF/ mm TRUE-SLIM FULL FACE FLANGES PE100 SDR11 SLIM FLANGE ASSEMBLY COMPLETE WITH NYLON COATED BACKING RING 4087 SLIMFLANGEFFN/250X X 200mm SLIMFLANGEFFN/315X X 250mm SLIMFLANGEFFN/355X X 300mm PE100 SDR11 SLIM FLANGE ASSEMBLY COMPLETE WITH 316 ST. STEEL BACKING RING 4087 SLIMFLANGEFFNSS/250X X 200mm SLIMFLANGEFFNSS/315X X 250mm SLIMFLANGEFFNSS/355X X 300mm Elbow 11 FPEHEL11/ mm (Fabricated) FPEHEL11/ mm FPEHEL22/ mm Other sizes and angles available on request LONG SPIGOT 11º ELBOWS Elbow 22 FPEHEL22/ mm (Fabricated) FPEHEL22/ mm FPEHEL22/ mm Other sizes and angles available on request LONG SPIGOT 90º ELBOWS PE100 SDR11 FPEHEL90/025 25mm SPIGOT ELBOW FPEHEL90/032 32mm 90 DEG FPEHEL90/040 40mm FPEHEL90/050 50mm FPEHEL90/063 63mm FPEHEL90/075 75mm FPEHEL90/090 90mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm FPEHEL90/ mm LONG SPIGOT 45º ELBOWS PE100 SDR11 FPEHEL45/025 25mm SPIGOT ELBOW FPEHEL45/032 32mm 45 DEG FPEHEL45/040 40mm FPEHEL45/050 50mm FPEHEL45/063 63mm FPEHEL45/075 75mm FPEHEL45/090 90mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm FPEHEL45/ mm PE Fusion PRICES INDICATED DO NOT INCLUDE GST

8 116 SDR11 Spigot Fittings LONG SPIGOT REDUCERS PE100 SDR11 FPEHR/025X X 20mm SPIGOT REDUCER FPEHR/032X X 20mm FPEHR/032X X 25mm FPEHR/040X X 20mm FPEHR/040X X 25mm FPEHR/040X X 32mm FPEHR/050X X 32mm FPEHR/050X X 40mm FPEHR/063X X 25mm FPEHR/063X X 32mm FPEHR/063X X 40mm FPEHR/063X X 50mm FPEHR/075X X 40mm FPEHR/075X X 50mm FPEHR/075X X 63mm FPEHR/090X X 50mm FPEHR/090X X 63mm FPEHR/090X X 75mm FPEHR/110X X 63mm FPEHR/110X X 75mm FPEHR/110X X 90mm FPEHR/125X X 63mm FPEHR/125X X 75mm FPEHR/125X X 90mm FPEHR/125X X 110mm FPEHR/140X X 125mm FPEHR/160X X 90mm FPEHR/160X X 110mm FPEHR/160X X 125mm FPEHR/160X X 140mm FPEHR/180X X 90mm FPEHR/180X X 125mm FPEHR/180X X 140mm FPEHR/180X X 160M FPEHR/200X X 160mm FPEHR/200X X 180mm FPEHR/225X X 160mm FPEHR/225X X 180mm FPEHR/225X X 200mm FPEHR/250X X 180mm FPEHR/250X X 200mm FPEHR/250X X 225mm FPEHR/280X X 225mm FPEHR/280X X 250mm FPEHR/315X X 225mm FPEHR/315X X 250mm FPEHR/355X X 250mm FPEHR/355X X 315mm FPEHR/450X X 355mm LONG SPIGOT TEES PE100 SDR11 FPEHT/020 20mm SPIGOT TEE FPEHT/025 25mm FPEHT/032 32mm FPEHT/040 40mm FPEHT/050 50mm FPEHT/063 63mm FPEHT/075 75mm FPEHT/090 90mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm FPEHT/ mm LONG SPIGOT HYDRANT TEES PE100 SDR11 SPIGOT FPEHHT/ X Hydrant HYDRANT TEE FPEHHT/ X Hydrant FPEHHT/ X Hydrant LONG SPIGOT END CAPS PE100 SDR11 FPEHCAP/025 25mm SPIGOT CAP FPEHCAP/032 32mm FPEHCAP/040 40mm FPEHCAP/050 50mm FPEHCAP/063 63mm FPEHCAP/075 75mm FPEHCAP/090 90mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm FPEHCAP/ mm

9 117 SDR17 Spigot Fittings LONG SPIGOT 90º ELBOWS LONG SPIGOT TEES PE100 SDR17 FPE17HEL90/090 90mm LS ELBOW 90 DEG FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm FPE17HEL90/ mm PE100 SDR17 FPE17HEL45/090 90mm LS ELBOW 45 DEG FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm FPE17HEL45/ mm LONG SPIGOT 45º ELBOWS LONG SPIGOT REDUCERS PE100 SDR17 FPE17HR/090X X 75mm LS REDUCER FPE17HR/110X X 63mm FPE17HR/110X X 090mm FPE17HR/125X X 110mm FPE17HR/140X X 125mm FPE17HR/160X X 110mm FPE17HR/160X X 125mm FPE17HR/160X X 140mm FPE17HR/180X X 110mm FPE17HR/180X X 140mm FPE17HR/180X X 160mm FPE17HR/200X X 160mm FPE17HR/225X X 160mm FPE17HR/225X X 200mm FPE17HR/250X X 200mm FPE17HR/250X X 225mm FPE17HR/280X X 250mm FPE17HR/315X X 200mm FPE17HR/315X X 225mm FPE17HR/315X X 250mm FPE17HR/315X X 250mm FPE17HR/355X X 250mm FPE17HR/355X X 315mm FPE17HR/450X X 355mm PE100 SDR17 FPE17HT/090 90mm LS TEE FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm FPE17HT/ mm LONG SPIGOT REDUCING TEES PE100 SDR17 FPE17HRT/090X X 75mm LS REDUCING FPE17HRT/160X X 110mm TEE FPE17HRT/200X X 160mm FPE17HRT/225X X 110mm FPE17HRT/225X X 160mm FPE17HRT/225X X 90mm FPE17HRT/250X X 110mm FPE17HRT/250X X 160mm FPE17HRT/315X X 160mm PE100 SDR17 FPE17HWYE/ mm LS ANGLE FPE17HWYE/ mm BRANCH WYE FPE17HWYE/ mm FPE17HWYE/ mm FPE17HWYE/ mm NEW ANGLE BRANCH WYE LONG SPIGOT STUB FLANGES PE100 SDR17 FPE17HSF/090 90mm LS STUB FLANGE FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm FPE17HSF/ mm PE Fusion PRICES INDICATED DO NOT INCLUDE GST

10 118 Butt Weld Fittings SDR11 BUTT WELD STUB FLANGES PE100 SDR11 FPEHSFBW/ mm BUTT WELD FPEHSFBW/ mm STUB FLANGE FPEHSFBW/ mm FPEHSFBW/ mm FPEHSFBW/ mm FPEHSFBW/ mm FPEHSFBW/ mm FPEHSFBW/ mm FPEHSFBW/ mm FPEHSFBW/ mm FPEHSFBW/ mm FPEHSFBW/ mm SDR17 BUTT WELD STUB FLANGES PE100 SDR17 FPE17HSFBW/ mm BUTT WELD FPE17HSFBW/ mm STUB FLANGE FPE17HSFBW/ mm FPE17HSFBW/ mm FPE17HSFBW/ mm FPE17HSFBW/ mm FPE17HSFBW/ mm FPE17HSFBW/ mm FPE17HSFBW/ mm FPE17HSFBW/ mm FPE17HSFBW/ mm FPE17HSFBW/ mm Other sizes available on request *Price Update Other sizes available on request SDR11 BUTT WELD TEES PE100 SDR11 FPEHTBW/ mm BUTT WELD TEE FPEHTBW/ mm FPEHTBW/ mm FPEHTBW/ mm FPEHTBW/ mm FPEHTBW/ mm SDR17 BUTT WELD TEES PE100 SDR17 FPE17HTBW/ mm BUTT WELD TEE FPE17HTBW/ mm FPE17HTBW/ mm FPE17HTBW/ mm SDR11 BUTT WELD REDUCERS PE100 SDR11 FPEHRBW/315X X 200mm BUTT WELD FPEHRBW/315X X 225mm REDUCER FPEHRBW/315X X 250mm FPEHRBW/355X X 225mm FPEHRBW/355X X 250mm FPEHRBW/355X X 280mm FPEHRBW/355X X 315mm FPEHRBW/400X X 250mm FPEHRBW/400X X 280mm FPEHRBW/400X X 315mm FPEHRBW/400X X 355mm FPEHRBW/450X X 280mm FPEHRBW/450X X 315mm FPEHRBW/450X X 355mm FPEHRBW/450X X 400mm FPEHRBW/500X X 355mm FPEHRBW/500X X 400mm FPEHRBW/500X X 450mm FPEHRBW/560X X 400mm FPEHRBW/560X X 450mm FPEHRBW/560X X 500mm FPEHRBW/630X X 400mm FPEHRBW/630X X 450mm FPEHRBW/630X X 500mm FPEHRBW/630X X 560mm FPEHRBW/710X X 560mm FPEHRBW/710X X 630mm Other sizes available on request

11 119 Backing Rings and Dressing Sets FBE COATED BACKING RINGS FOR PE FBE Coated 4087 FPEBRNTD/ PN16 Backing Ring FPEBRNTD/ Table D/E Drilling FPEBRNTD/ for PE FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FPEBRNTD/ FBE Coated FPEBRNTE/ Backing Ring FPEBRNTE/ Table E Drilling FPEBRNTE/ for PE FPEBRNTE/ FPEBRNTE/ CODE: SIZE (OD) mm PRICE GALVANISED BACKING RINGS FOR PE Galvanised 4087 FPEBRGTD/ PN16 Backing Ring FPEBRGTD/ Table D/E Drilling FPEBRGTD/ for PE FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ FPEBRGTD/ CODE: SIZE (OD) mm PRICE PE TO DI DRESSING SETS CODE Size Bolt Price (OD) Lgth mm mm Dressing Set FPEHDRESS316TD/ SS Bolts FPEHDRESS316TD/ Table D FPEHDRESS316TD/ EPDM Gasket FPEHDRESS316TD/ FPEHDRESS316TD/ *FPEHDRESS316TD/ FPEHDRESS316TD/ FPEHDRESS316TD/ FPEHDRESS316TD/ FPEHDRESS316TD/ FPEHDRESS316TD/ FPEHDRESS316TD/ FPEHDRESS316TD/ FPEHDRESS316TD/ * Table D/E Dressing Set FPEHDRESSGTD/ Galv Bolts FPEHDRESSGTD/ Table D FPEHDRESSGTD/ EPDM Gasket FPEHDRESSGTD/ FPEHDRESSGTD/ *FPEHDRESSGTD/ FPEHDRESSGTD/ FPEHDRESSGTD/ FPEHDRESSGTD/ FPEHDRESSGTD/ FPEHDRESSGTD/ FPEHDRESSGTD/ FPEHDRESSGTD/ FPEHDRESSGTD/ Galvanised FPEBRGTE/ Backing Ring FPEBRGTE/ Table E Drilling FPEBRGTE/ for PE FPEBRGTE/ FPEBRGTE/ FPEBRGTE/ FPEBRGTE/ FPEBRGTE/ FPEBRGTE/ SS BACKING RINGS FOR PE CODE: SIZE (OD) mm PRICE SS 4087 PN16 FPEBRSSTD/ Backing Ring FPEBRSSTD/ Table D Drilling FPEBRSSTD/ for PE FPEBRSSTD/ FPEBRSSTD/ FPEBRSSTD/ FPEBRSSTD/ FPEBRSSTD/ FPEBRSSTD/ FPEBRSSTD/ FPEBRSSTD/ FPEBRSSTD/ FPEBRSSTD/ SS 4087 PN16 FPEBRSSTE/ Backing Ring FPEBRSSTE/ Table E Drilling FPEBRSSTE/ for PE FPEBRSSTE/ PE Fusion * Table D/E PRICES INDICATED DO NOT INCLUDE GST

12 120 Machines & Tooling Product Global Presence - Local Commitment Electrofusion Machines Butt Welding Machines Socket Fusion Machines Peeling Tools Alignment Tools ReRounding Clamps Squeeze Off Tools Beveling Tools Cutting Tools Exact PipeCut Saws De-Beading Tools Data Recorders Extrusion Guns PE Fabrication Machines & Tooling Download the full catalogue from our website or contact the Asmuss Plastic Systems office to request a hard copy. Asmuss Plastic Systems Limited FREEPHONE: Facsimile: (64) (9) sales@plasticsystems.co.nz 34 Arrenway Drive, North Shore City 0632 P.O. Box , North Shore City 0745, Auckland, NZ LEADERS IN PIPELINE TECHNOLOGY Pipe Fittings Valving Measurement & Control