Wrot and Cast Pressure Fittings
|
|
|
- Agnes Thomas
- 5 years ago
- Views:
Transcription
1 Wrot and Cast Pressure Fittings 600 Series Wrot 700 Series Cast Adapters Air Chambers Bulkhead Fittings Bushings Caps Couplings Crosses Elbows Fitting Reducers Flanges Plugs Return Bends Straps Tees Traps Unions Venturi Y s The manufacturing plants at Stuarts Draft, VA, Nacogdoches, TX and Reynosa, Mexico manufacture products under a Quality Management System conforming to the current revision of ISO-9001 International Standards 5
2 ADAPTERS 603 Adapter C x F Wrot x / x x 1/ x / /2 x /2 x /2 x x x 1/ x x 1/ x x x 1/ x 1 1/ x / /2 x x 1 1/ / Adapter C x F Cast 1 x 1/2 0. 1/2 x x x x 1 1/ x x /2 x /2 x /2 x x / Fitting Adapter Ftg x F Wrot / /2 x / Fitting Adapter Ftg x F Cast 1/2 x x 1/ x x 1/ / Special Drop Adapter C x F Cast 1/ B Drop Adapter C x F Cast 1/
3 ADAPTERS continued 604 Adapter C x M Wrot 1 x x x 1/ / /2 x /2 x /2 x /2 x x x 1/ x x 1/ x 1 1/ x x x 1/ x 1 1/ x / /2 x /2 x /2 x x 1 1/ / Adapter C x M Cast 3 x 1 1/ x x x x 1 1/ x x /2 x x 2 1/ x 1 1/ x / /2 x F Flush Adapter C x M Cast 1/ H Hose Adapter C x Hose Cast 1/ NOTE: Fits," 5 " and 3 " Garden Hose Fitting Adapter Ftg x M Wrot / /2 x /2 x Fitting Adapter Ftg x M Cast 3 x x 1/ x / /
4 ADAPTERS continued BULKHEAD FITTINGS BUSHINGS H Hose Adapter Ftg x Hose Cast 3 F x 3 H NOTE: Fits," 5 " and 3 " Garden Hose. AIR CHAMBERS 6 Air Chamber Ftg. Wrot DIM. L INCHES 1/2 x /2 x /2 x x Bulkhead Fitting C x C Cast DIM. B INCHES 1/ / Bulkhead Fitting C x F Cast DIM. B INCHES 1/ Flush Bushing Ftg x C Wrot APPROX. DIM. C 1 x x /2 x /2 x x 1/ x x 1/ x x x 1/ x /2 x x 1 1/ Flush Bushing Ftg x F Wrot 1/2 x /2 x L Air Chamber or Stub-Out Ftg Wrot As Air Chamber, just solder one joint. When used as Stub-Out, simply pressure test system then cut off stub-out (save piece for future use) and install valve or fixture. APPROX. DIM. L 1/2 x /2 x /2 x /2 x x Bulkhead Fitting C x M Cast DIM. B INCHES 1/ Flush Bushing Ftg x F Cast 3 x x 1/ x /2 x
5 CAPS COUPLINGS 6 Tube Cap C Wrot APPROX. DIM. N / / / Tube Cap C Cast APPROX. DIM. N D Drain Cap Cast 1/ Reducing Coupling C x C Wrot 1 x 3 O.D O.D. x x 5 O.D x x x 5 O.D x /2 x /2 x /2 x x 1/ x x x x 1/ x x x x x 1/ x x x x x 1/ /2 x /2 x /2 x /2 x 1/ /2 2 x 1 1/ x x x x 1/ /2 x /2 x 1 1/ /2 x /2 x Continues 3 x 2 1/ x x 1 1/ /2 x x 3 1/ x x 2 1/ x x x x 2 1/ x x x x x 2 1/ x x x x x 2 1/ RS Coupling with Rolled Tube Stop C x C Wrot 1 O.D O.D O.D / / / /
6 COUPLINGS continued 600-DS Coupling with Dimpled Tube Stop C x C Wrot 3 O.D O.D / / / / Coupling without Stop C x C Wrot / / / / D Drain Coupling C x C Cast 1/ Eccentric Coupling C x C Cast 3 x 1/ x x x Reducing Coupling C x C Cast 3 x x A Hy-Set Hanger Coupling C Cast APPROX. DIM. C DIM. D INCHES 1/
7 COUPLINGS continued CROSSES ELBOWS Elbow C x C Wrot APPROX. DIM. C DIM. D INCHES 736 Cross-Over Coupling C x C Cast 1/ Cross C x C x C x C Cast / / / / / / Fitting Elbow Ftg x C Wrot DIM. C INCHES / / /
8 ELBOWS continued Fitting Elbow Ftg x C Cast DIM. C INCHES Elbow Close Rough C x C Wrot 15 APPROX. DIM. C DIM. D INCHES / /2 x x x 1/ x x / /2 x x 1 1/ / / Elbow Close Rough C x C Cast APPROX. DIM. C DIM. D INCHES 1 1 x x x 1/ /2 x /2 x /2 x 1/ x x x /2 x x 2 1/ x x I 90 Elbow Intermediate Radius C x C Wrot APPROX. DIM. C DIM. D INCHES 1/ LT 90 Elbow Long Radius C x C Wrot APPROX. DIM. C DIM. D INCHES 3 O.D O.D x / /2 x /2 x x 1/ x x 1/ x x x / /
9 ELBOWS continued Fitting Elbow Close Rough Ftg x C Wrot DIM. C INCHES / / / LT 90 Fitting Elbow Long Radius Ftg x C Wrot DIM. C INCHES / /2 x /2 x / /2 x / LT 90 Fitting Elbow Long Radius Ftg x Ftg Wrot / / I 90 Fitting Elbow Intermediate Radius Ftg x C Wrot DIM. C INCHES 1/ Fitting Elbow Close Rough Ftg x Ftg Wrot 1/ / Fitting Elbow Ftg x M Cast DIM. E INCHES 1/
10 ELBOWS continued Elbow C x F Cast APPROX. DIM. C DIM. E INCHES x 1/ / /2 x /2 x /2 x x x 1/ x x 1/ x / A 90 Hy-Set Elbow C x F Cast APPROX. DIM. C DIM. E INCHES 1/ Union Elbow C x F Cast 7 DIM. E INCHES 1/ Union Elbow C x M Cast DIM. E INCHES / Drop Elbow C x C Cast DIM. C INCHES 1/ Drop Elbow C x F Cast NOM. DIM. C DIM. E SIZE NET WT./LBS. INCHES INCHES INCHES x 1/ / /2 x x 1/ Elbow C x M Cast APPROX. DIM. C DIM. E INCHES / /2 x /2 x x x 1/ / A 90 Hy-Set Elbow C x C Cast NOM. DIM. C DIM. D SIZE NET WT./LBS. INCHES INCHES INCHES 1/
11 ELBOWS continued FITTING REDUCERS Union Elbow C x C Cast DIM. C INCHES / Flanged Sink Elbow C x F Cast NOM. DIM. C DIM. F SIZE NET WT./LBS. INCHES INCHES INCHES 1/ Double Elbow C x C x C Cast APPROX. DIM. C DIM. D INCHES 1 x 3 x Fitting Reducer Ftg x C Wrot 1 x x x /2 x /2 x x 1/ x x x x 1/ x x x x x 1/ x x x x 1/ /2 x /2 x /2 x /2 x 1/ x 1 1/ x x x x 1/ /2 x /2 x 1 1/ /2 x /2 x x 2 1/ x x 1 1/ x /2 x Continues 4 x 3 1/ x x 2 1/ x x x x 2 1/ x x x x x 2 1/ x x x x x x 2 1/ x FLANGES CLASS Companion Flange C Cast NOM. DIM. F DIM. G DIM. W SIZE NET WT./LBS. INCHES INCHES INCHES INCHES 1/ / / NOTE: Dim. B = Tube Stop to Flange Face 15
12 FLANGES CLASS 150 PLUGS STRAPS 771 Companion Flange C Cast NOM. DIM. F DIM. G DIM. W SIZE NET WT./LBS. INCHES INCHES INCHES INCHES / / NOTE: Dim. B = Tube Stop to Flange Face 775 Threaded Companion Flange F Cast NOM. APPROX. DIM. E DIM. F DIM. W SIZE NET WT./LBS. INCHES INCHES INCHES / Fitted Plug Ftg - Wrot / RETURN BENDS 638 Return Bend C x C Wrot APPROX. DIM. E DIM. J INCHES / / Return Bend Closed C x C Cast APPROX. DIM. E DIM. J INCHES 6 Copper Hanger Strap SIZE TEES APPROX. NET WT./LBS. 3" Wide x Ft. Roll Tube Strap NOM. SIZE APPROX. NET WT./LBS / / Baseboard Tee C x F x C Cast NOM. SIZE LBS. C D E 1/2 x 1 x /2 x 1 x 1/ x 1 x x 1 x x 1 x x 1 x
13 TEES continued 705-D Vent Elbow C x C Cast NOM. SIZE LBS. C D S 1/ Tee F x F x C Cast NOM. SIZE LBS. C E S 1/ x 3 x 1/ x 1/2 x x 1/2 x 1/ Tee M x F x C Cast NOM. SIZE LBS. C E S x 3 x 1/ Tee C x C x C Wrot NOM. SIZE LBS. C F G 3 O.D x 1 x x 1 x 3 O.D x 3 O.D. x O.D O.D. x 5 O.D. x O.D. x 5 O.D. x O.D. x 1 x 5 O.D O.D. x 1 x x 1 x 1/ x 1 x x 1 x 5 O.D x 1 x x 1 x 3 O.D x 5 O.D. x x 1 x x 1 x x 3 x 1/ x 3 x x 3 x 5 O.D x 3 x x 1 x x 1 x x 1 x x 1 x x 1 x / /2 x 1/2 x /2 x 1/2 x /2 x 1/2 x /2 x 1/2 x /2 x 1/2 x /2 x 3 x 1/ /2 x 3 x /2 x 3 x /2 x 1 x Continues NOTE: Tee sizes are read Run x Run x Outlet. NOM. SIZE LBS. C F G x 5 x x 5 x 1/ x 5 x x 5 x x 1/2 x x 1/2 x 1/ x 3 x x 3 x x 3 x /2 3 x 3 x x 3 x 1/ x 3 x x 3 x x 3 x x 5 x x 5 x x 1/2 x x 1/2 x 1/ x 1/2 x x 3 x x 3 x 1/ x 3 x x 1 x 1 1/ x 1 x x 1 x x 1 x x 1 x 1/ x 1 x x 1 x x 3 x x 3 x x 3 x 1/ Continues
14 TEES continued 6 Tee C x C x C Wrot continued NOM. SIZE LBS. C F G 1 x 1/2 x x 1/2 x x 1/2 x 1/ x 1 1 x x 1 1 x 1 1/ x 1 1 x x 1 1 x x 1 1 x 1/ x 1 1 x x 1 x x 1 x x 1 x x 1 x 1/ x 3 x x 3 x x 3 x x 3 x 1/ x 1/2 x / /2 x 1 1/2 x /2 x 1 1/2 x /2 x 1 1/2 x /2 x 1 1/2 x /2 x 1 1/2 x 1/ / /2 x 1 1 x 1 1/ /2 x 1 1 x /2 x 1 1 x /2 x 1 1 x /2 x 1 1 x 1/ /2 x 1 x 1 1/ /2 x 1 x /2 x 1 x /2 x 1 x /2 x 1 x 1/ / /2 x 3 x 1 1/ /2 x 3 x /2 x 3 x /2 x 3 x /2 x 3 x 1/ /2 x 1/2 x 1 1/ Continues NOM. SIZE LBS. C F G x 2 x 2 1/ x 2 x 1 1/ x 2 x x 2 x x 2 x x 2 x 1/ x 1 1/2 x x 1 1/2 x 1 1/ x 1 1/2 x x 1 1/2 x x 1 1/2 x 1/ x 1 1 x x 1 1 x 1 1/ x 1 1 x x 1 1 x x 1 1 x / 2 x 1 x x 1 x x 3 x x 1/2 x / /2 x 2 1/2 x /2 x 2 1/2 x 1 1/ /2 x 2 1/2 x /2 x 2 1/2 x /2 x 2 1/2 x /2 x 2 1/2 x 1/ /2 x 2 x 2 1/ /2 x 2 x /2 x 2 x 1 1/ /2 x 2 x /2 x 2 x /2 x 2 x /2 x 1 1/2 x 1 1/ /2 x 1 1 x 2 1/ /2 x 1 x 2 1/ /2 x 3 x 2 1/ Continues NOTE: Tee sizes are read Run x Run x Outlet. NOM. SIZE LBS. C F G x 3 x 2 1/ x 3 x x 3 x 1 1/ x 3 x x 3 x x 3 x x 3 x 1/ x 2 1/2 x x 2 1/2 x 2 1/ x 2 1/2 x x 2 x x 2 x 2 1/ x 2 x x 1 1/2 x x 1 1 x x 1 x x 3 x / x 4 x x 4 x 2 1/ x 4 x x 4 x 1 1/ x 4 x x 4 x x 4 x x 3 x x 3 x x 3 x 2 1/ x 3 x x 2 1/2 x x 2 x Continued on next page. 18
15 TEES continued 6-HE Heat Exchanger Tee C x C x C Wrot 6 Tee C x C x C Wrot continued NOM. SIZE LBS. C F G x 5 x x 5 x x 5 x 2 1/ x 5 x x 5 x 1 1/ x 5 x x 5 x x 4 x x 4 x x 2 x x 6 x x 6 x x 6 x x 6 x 2 1/ x 6 x x 6 x 1 1/ x 6 x x 6 x x 6 x x 6 x 1/ x 4 x x 4 x 1 1/ x 8 x x 8 x x 8 x x 8 x x 8 x 2 1/ x 8 x NOTE: Tee sizes are read Run x Run x Outlet. Tube slips entirely through fitting on small end of run. Sizes same as listed under 6 where tee has one or more reductions on one end of run. 7 Tee C x C x C Cast NOM. SIZE LBS. C F G 1 1 x 1/2 x x 1/2 x 1/ /2 x 1/2 x x 2 x x 1 x 1 1/ x 3 x /2 x 2 1/2 x /2 x 1 1/2 x /2 x 1 1/2 x 1 1/ /2 x 1/2 x 2 1/ x 3 x x 2 1/2 x 1 1/ x 2 x 1 1/ x 4 x x 2 x A Supply and Return Tee C x C x C Cast NOM. SIZE LBS. C J 1/ Fitting Tee C x Ftg x C Wrot NOM. SIZE LBS. B C F 1/ Drop Tee C x C x C Cast 3 1 /2 7 NOM. SIZE LBS. A C 1/
16 TEES continued TRAPS 712 Tee C x C x F Cast NOM. SIZE LBS. E F G / / /2 x 1/2 x /2 x 1/2 x /2 x 1/2 x x 3 x x 3 x 1/ / x 1 1 x 1/ x 1 1 x x 1 1 x x 1 x 1/ x 1 x /2 x 1 1/2 x 1/ /2 x 1 1/2 x /2 x 1 1/2 x x 2 x 1/ x 2 x x 2 x x 3 x x 1/2 x x 3 x Tee C x C x M Cast NOM. SIZE LBS. E F 1/ Tee C x F x C Cast 7 9 NOM. SIZE LBS. C E S 1/ /2 x 3 x 1/ x 1/2 x x 3 x x 1/2 x x 3 x x 1/2 x / /2 x 3 x 1 1/ x 3 x x 1/2 x Suction Line P-Trap C x C Wrot A major application of this fitting is on the suction line of a refregeration compressor. The line is looped, by use of the Suction Line P-Trap, to the floor prior to being run vertically upwards to prevent the drainage of oil back to the compressor during shut down periods. Additional P-Traps are used for each 20' or riser pipe. this prevents high velocity build-up as the oil or liquid begins to return to the compressor during this shut down period. NOM. SIZE LBS. C D J K 1/ / Drop Tee C x C x F Cast NOM. SIZE LBS. A C E 1/
17 UNIONS A H E A D O F T H E F L O W VENTURI 633-W Union C x C Wrot / Union C x C Cast / / /2 2 1/ Fitting Union Ftg x C Cast 1/ Fitting Union C x F Cast / / Union C x M Cast / /2 x / / Venturi Insert Wrot Converts any tee into a special purpose venturi or scoop tee NOM. SIZE APPROX. NET WT./LBS. 1/ Y s Y C x C x C Cast DIM. B INCHES 1/ Y C x C x C Cast 7 5 DIM. B INCHES 1/ /
NEW PACKAGING from NIBCO... O.D. Size. *Pkg Qty. Bag Case
WROT COPPER FITTINGS ACR-0518 Effective May 14, 2018 Supercedes ACR-0917 of September 25, 2017 Visit our website for the most current information *Prices and MTO status subject to change without notice
NEW PACKAGING from NIBCO... O.D. Size. *Pkg Qty. Bag Case
WROT COPPER FITTINGS ACR-0718 Effective July 2, 2018 Supercedes ACR-0518 of May 14, 2018 Visit our website for the most current information *Prices and MTO status subject to change without notice NEW PACKAGING
ALRO PRODUCTS INTERNATIONAL, LLC Copper Fittings. Product # Ref. Numbers Nominal I.D. Size Refrigeration O.D. Size List Price ADAPTER - C X FIP
Page 1 of 12 ADAPTER - C X FIP P5312 603 1/4 3/8 X 1/4 $ 9.91 P4656 603 3/8 1/2 X 3/8 $ 10.36 P4654 603 1/2 5/8 X 1/2 $ 5.26 P4657 603 3/4 7/8 X 3/4 $ 7.22 P4658 603 1 1-1/8 X 1 $ 16.52 P4659 603 1-1/4
WITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
Copper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Jan. 23, 2017 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 21.04 25 3000 HL15-105-0001 1/8 1/4 x 1/8
Copper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Feb. 9, 2015 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 19.36 25 3000 HL15-105-0001 1/8 1/4 x 1/8
mhtml:file://c:\users\granzowa\desktop\nsf IAPMO PS-117 Listing.mht
Page 1 of 8 The Public Health and Safety Organization NSF Product and Service Listings These NSF Official Listings are current as of Friday, May 16, 2014 at 12:15 a.m. Eastern Time. Please contact NSF
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0317)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0317) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0118)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
Duo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
Pipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
PVC DWV Drain Waste Vent Fittings
DWV Standards PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Contact Spears for any information not found. Page 983 Suitable for low pressure air handling 5 psi, not for distribution of compressed
PD2CAEPIPE - Plant Design-to-CAEPIPE Translator
PD2CAEPIPE - Plant Design-to-CAEPIPE Translator (for converting PCF files) 1.0 Installing Program To install PD2CAEPIPE on Windows NT, load the product CD supplied by InfoPlant and run the program "SETUP.EXE"
PIPE FITTINGS - PLASTIC - ABS/DWV ARH A
PIPE FITTINGS - PLASTIC - ABS/DWV ARH 172-251A NIBCO DRAINAGE FITTINGS AUG 7 2015 VENDOR NUMBER 039923 CANCELS APR 3 2015 SOIL PIPE ADAPTER, CAST IRON - Hub x Hub 19400 5800 2" $23.66 $47.32 + 19402 5800
PVC SOLVENT WELD DRAIN WASTE & VENT
PVC-17R PAGE 1 november 007 COUPLING (Hub x Hub) 0 110 11 11 11 1171 1 1/ 0 7 00 00 0 10.9.79 1.0.. 1. REDUCER BUSHING (Spigot x Hub) Style 17 x TRAP ADAPTER (Spigot x Slip Joint ) 1 19.71 REDUCER COUPLING
PVC DWV Drain Waste Vent Fittings
PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Visit our web site www.spearsmfg.com 1212 SPEARS IE OF QUAITY PVC DRAI, WASTE AD VET (DWV) FITTIS ARE MAUFACTURED I STRICT COMPIACE TO ASTM D 2665. STADARDS
USA Whole Price List
USA Whole Price List Tips & Tricks How to Use the BMI Parts Catalog 1. Using the Table of Contents This reference page not only provides a listing of price lists and page numbers, it also links to each
WELDBEND CARBON STEEL WELDING FITTINGS
070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71
SOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
ORDERS MUST BE PLACED BY ING
MIDLAND METAL MFG Fittings, Valves, Clamps & Accessories for Hose, Pipe and Tube ORDERS MUST BE PLACED BY EMAILING SPECIALS@MIDLANDMETAL.COM PVC DWV FITTINGS 2 WEEK LEAD TIME Use your Midland Metal multiplier
PVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
Price Book - Section F Pipe & Accessories
Effective Date March, 20 Price Book - SCI Coop-Let F.T. Part No. Size / Description List Price 2500 SCI Coop-Let F.T. /2" x "- /2 $8.20 2520 SCI Coop-Let F.T. /2" x 2"-2 /2 $8.20 250 SCI Coop-Let F.T.
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
PRESS-0115R2 Effective January 2, 2017 Supercedes PRESS-0115R of January 19, 2015
FITTINGS & ACCESSORIES FOR COPPER PIPING PRESS-0115R2 Effective January 2, 2017 Supercedes PRESS-0115R of January 19, 2015 Visit our website for the most current information FITTINGS NOTE: For all Press
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
Call us on
RAINWATER & PLUMBING 02 Rainwater & Plumbing Half Round 112mm, Rainwater System White, Black, Brown, Grey ½ Rd Gutter 4m R10002 112/68mm 11.95 ½ Rd Fascia R10007 1.00 ½ Rd - C/Iron Ogee Adapter L/H R10983
Plumbing Brass Specification Guide
Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one
CLASS 150. Investment Cast Stainless Steel Threaded End Fittings
Investment Cast Stainless Steel Threaded End Fittings Covering sizes from /8 to, DIE ERSTE manufactures and supplies the highest quality investment cast stainless steel threaded end fittings. In this series,
SCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings
Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a
PVC Effective June 26, 2017 Supercedes PVC-0415 of April 13, Tee Reducing - slip x slip x slip (Cont.) Tee - slip x slip x slip
PVC SCHEDULE 40 PRESSURE FITTINGS PVC-0617 Effective June 26, 2017 Supercedes PVC-0415 of April 13, 2015 Suggested List Prices Subject to Change Without Notice Visit our website for the most current information
Fig. List Incremental UPC Packaging No. Size Price Order Qty* Box Skid
PVC Schedule 40 Pressure Fittings PVC-0812 Effective Aug. 27, 2012 Supercedes PVC-0611 dated June 27, 2011 Suggested List Prices Subject to Change Without Notice Visit our website for the most current
PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
Tech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
Air-Pro Blue Polyethylene (PE) Compressed Air Piping System
- Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR),
Viega Pexcel Water System
Viega Pexcel Water System PAGE 57-1 ViegaPEX Ultra ViegaPEX Ultra is manufactured to ASTM F876/F877 standards and listed to ANSI/ NSF Standards 14 and 61. It is chlorine resistance rated for both traditional
Assembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
Quick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems
Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10
1.5 to 5 Tons INDOOR COILS CX35. Upflow - Cased - R-410A PRODUCT SPECIFICATIONS C X A - 6 F MODEL NUMBER IDENTIFICATION FEATURES
INDOOR COILS CX35 Upflow - Cased - R-40A PRODUCT SPECIFICATIONS Bulletin No. 0668 November 06 Supersedes September 05.5 to 5 Tons MODEL NUMBER IDENTIFICATION C X 35-36 A - 6 F Unit Type C = Indoor Coil
CPVC Hot and Cold Water System
CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard
1.5 to 5 Tons INDOOR COILS CH35. Horizontal PRODUCT SPECIFICATIONS CH A - 2 F MODEL NUMBER IDENTIFICATION FEATURES
INDOOR COILS PRODUCT SPECIFICATIONS Horizontal Bulletin No. 20667 November 206 Supersedes August 206.5 to 5 Tons MODEL NUMBER IDENTIFICATION CH 35-8 A - 2 F Unit Type CH = Indoor - Horizontal Series Nominal
Technical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG EFFECTIVE
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 4-15-13 SUPERDUCT PVC DUCT PIPE Part No. Size O.D. Wall Std. Length List Price Per Ft. List Price Per Ft. Extruded 10 ft. 20 ft. 1033-PP-02
3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com JUNE C- BULLETIN A.C.V.I.M., REV.
Pipes and fittings. Drain,Waste & Vent (DWV)
K e y P l a s t i c s I n n o v a t i v e d e s i g n & e x c e p t i o n a l s e r v i c e Pipes and fittings Drain,Waste & Vent (DWV) DWV Pipes and Fittings Contents 3 Pipes 4 Plain, I.O & Access Bends
ADAPTERS. Fig. No. Packaging C $ C x 1 1 / Fig. No.
PVC DWV FITTINGS SUGGESTED LIST PRICES PDWV-0918 Effective September 4, 2018 Supercedes PDWV-0318 of March 19, 2018 Prices and MTO status subject to change without notice Visit our website for the most
Unitary Construction Double Wall Piping System
Unitary Construction Double Wall Piping System 221 Page intentionally left blank 222 Co-Extruded Double Containment Chem Proline Black PE Resin Crack resistant proprietary resin formulation Excellent abrasion
Ductile Iron Flanged Fittings DIA. OF BOLT CIRCLE FLANGE THICKNESS 2" " "
-27 NOM. PIPE FLNGE O.D. DI. OF OLT CIRCLE JOINT DIMENSIONs (in inches) FLNGE THICKNESS OLT HOLE DIMETER NO. OF OLTS OLT DI. & LENGTH O.D..C. T 2" 6.00 4.75.62.750 4 5 8 2 1 4 3" 7.50 6.00.75.750 4 5 8
Technical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
Harrison Machine & Plastic Corporation HARRISON SUPERDUCT FUME EXHAUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG
Harrison Machine & Plastic Corporation HRRISON SUPERDUCT FUME EXHUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 01-01-2018 1 HRRISON SUPERDUCT PVC DUCT PIPE Part No. Size O.D.
Third Party Tested. Sam Roberts & Associates, Inc.
Perfect Fit Solvent Weld DWV Fittings Injection Molded in Sizes 4 12 Fabricated in Sizes 10 24 D Applications The most complex installations require the most advanced fittings. Injection molded Perfect
Viega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
1.5 to 5 Tons INDOOR COILS C35. Upflow - Cased and Uncased PRODUCT SPECIFICATIONS C A - 2 F - 1 MODEL NUMBER IDENTIFICATION FEATURES
INDOOR COILS C35 PRODUCT SPECIFICATIONS Upflow - Cased and Uncased Bulletin No. 20666 February 208 Supersedes November 206.5 to 5 Tons MODEL NUMBER IDENTIFICATION Unit Type C = Indoor Coil = Upflow Series
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94 SINCE 1998 PREVIOUSLY PAC FAB 1 2 3 KEY 4 4654-25 KEY 4 4654-69 KEY 8 4654-30 20 4 5 7 6 KEY 8 4654-74A KEY 9 4654-23 8 9 10 12 13 KEY 23 4601-4801 KEY 19 4650-14A
E SERIES CIRCULATORS
E SERIES CIRCULATORS CAST IRON BODY CONSTRUCTION BRONZE BODY CONSTRUCTION Part No. Part No. Model 120V Motor 240V Motor List Price Wt (lbs) Model 120V Motor 240V Motor List Price Wt (lbs) E7 180200-643
bar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
Coupling Dimensions Bolts Max. End. Allow Pipe Outside. Load Size Dia. End Sep. A B C No. Size x Length kg
OUPLINGS Style Reducing oupling Features Reducing oupling provides direct reduction on the pipingrun, without any accesories onsists of reducing gaskets and a steel washer which prevents entry of the smaller
BS up.v.c SOIL, WASTE, VENT PIPES AND FITTINGS
Soil Waste & Vent Pipes Sweep Bend Sweep Bend with Inspection Opening 91¼ Soil Waste & Vent pipes for solvent weld connection to all fittings. Wall Length Mean Outside Thickness L in per M. Dia. D (mm)
90 Elbows Long Radius
90 Elbows Long Radius DN O.D. Center SCH STD SCH XS SCH XXS SCH 10 SCH 20 SCH 30 SCH 40 SCH 60 SCH 80 SCH 100 SCH 120 SCH 160 Inch mm to End Thickness Weight Thickness Weight Thickness Weight Thickness
The Trade Soil & Waste Product Guide
The Trade Soil & Waste Product Guide 6/7 Empire Centre Watford Herts WD24 4YH 01923 233330 www.brandsofwatford.co.uk Introduction Welcome to the new edition of our Trade Soil & Waste Product Guide. This
CURRICULUM FOR SIX MONTH CERTIFICATE COURSE FITTING & PLUMBING UNDER DEVELOPMENT. Prepared By CURRICULUM DEVELOPMENT CELL
CURRICULUM FOR SIX MONTH CERTIFICATE COURSE IN FITTING & PLUMBING UNDER DEVELOPMENT Prepared By CURRICULUM DEVELOPMENT CELL INSTITUTE OF RESEARCH, DEVELOPMENT, TRAINING,U.P., KANPUR-208002 SIX MONTH CERTIFICATE
Flow Visualization. Detailed Design Review 2/15/08
Flow Visualization Detailed Design Review 2/15/08 Team Allen Luccitti Kyle Hadcock Mark Bacon Steve Sedensky Topics of Review Customer needs Design specifications Bill of material Pump design Flow loop
PREMIER PUMP & SUPPLY, INC. SCHEDULE 40 PVC PROVIDING YOU WITH THE VERY BEST SERVICE IN THE INDUSTRY! PAGE P - 1 MARCH
SCHEDULE 0 PVC D ESCRIPTION INCHES TEE ( SLIP X SLIP X SLIP ) 0-00 0-007 0-00 0-0 0-0 0-00 0-0 0-00 0-00 / / 90 ELL ( SLIP X SLIP ) 0-00 0-007 0-00 0-0 0-0 0-00 0-0 0-00 0-00 / / COUPLING ( SLIP ) 9-00
SPARE PARTS LIST CP COMPRESSOR. Model CPD CPD 75
SPARE PARTS LIST CP COMPRESSOR Model CPD 75-00 EN 05 0 5 CPD 75 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? MAINTENANCE KITS STANDARD UNITS MOTOR-COMPRESSOR UNIT -7 AIR CIRCUIT -9
3-23 March 1/07 BUSHINGS STANDARD SPECIFICATION: MATERIALS: DIMENSIONS: FLANGE DIMENSIONS: THREADS:
BOSHART INDUSTRIES Telephone: -9-9- - Toll Free: -00-- Fax: -9-9-0 - www.boshart.com CAST BRONZE THREADED PIPE FITTINGS - LBS - March /07 STANDARD SPECIFICATION: Northwest Territories Yukon Territories
DIAMOND ALUMINUM COMPANY
ENGINEERING DATA FOR DIAMOND ALUMINUM COMPANY ALUMINUM SLIP-ON FITTINGS SCHEDULE 40 ALUMINUM PIPE 9 East Galbraith Road Cincinnati Ohio 4526 Voice: (53) 82-080 Fax: (53) 82-02 E-mail: info@diamond-aluminum.com
Hoshizaki America, Inc.
Hoshizaki America, Inc. Low-Profile Modular Crescent Cuber Models KML-351MAH KML-351MWH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71267 Issued: 5-9-2008 Revised: 10-13-2014
STAINLESS STEEL CAST FITTINGS 150lb 304 & 316 Stainless Steel Cast Fitting List Prices (SSC-0818)
STAINLESS STEEL CAST FITTINGS 150lb 30 & 31 Stainless Steel Cast Fitting List s (SSC01) Manufactured in ISO9000:0 Facility Items Conform to AISI 30 / 31 Investment Cast with Material Test Reports Stainless
Spare part catalogue GB 03/2007. Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7
Spare part catalogue 0020037555.03 GB 03/2007 Wall-hung boilers ecotec exclusive 832, 838 VUW 326/4-7 VUW 386/4-7 Content General view of sheet Page 3 04 Burner Page 4 06 Heat exchanger Page 6 07 Casing
Clamp Together Ducting Catalog
K&B Duct Clamp Together Ducting Catalog Featuring the FOREVER CLAMP with the exclusive FOREVER Guarantee. A family of companies creating better working environments for you. The FOREVER Clamp Winged O-Ring
Series P. Solvent Weld Sewer Fittings SDR 35. Solvent Weld Sewer Fittings SDR 35 P Series
Solvent ITEM Weld INCHES NUMBER Sewer QTY Fittings QTY PRICE SDR ITEM 35 INCHES NUMBER QTY QTY PRICE Injection Molded in Sizes 3 12 Fabricated in Sizes 10 27 page 27 Phone: 586-781-2700 Toll Free: 1-800-232-5690
robust advanced technology Accessories » for mobile and stationary Ringler suction systems
www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection
LF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
DWV Systems. Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: < STANDARDS >
Submittal Data Sheet Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date < STANDARDS > CSA B181.2 System 15 CAN/ULC S102.2 PVC is the most frequently specified
TILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
PVC SOLVENT WELD SEWER & DRAIN FITTINGS
LIST U41-0418-IP PVC SOLVENT WELD SEWER & DRAIN FITTINGS APRIL 9, 2018 SUPERSEDES U41-1017-IP (OCTOBER 30, 2017) www.ipexna.com For products requiring bar coding, - 1 - www.ipexna.com LIST U41-0418-IP
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing Why Gardner Denver? Simply stated There is no equal Quick-Lock from Gardner Denver has taken piping systems to a new level. Without compromising any structural
North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214 TABLE OF CONTENTS PEX PIPE page category SUPERPEX ultra resistant potable water pipe 3 C-54 OXYPEX oxygen barrier radiant
Model # *** Valves for Security Applications *** List Price Ea.
Model # *** Valves for Security Applications *** List Price Ea. E1201-1.6-SC-T42 OPERATED w/ 1.5" X 18" FLUSH CONNECTION for BACK SPUD w/ SLIPFIT CONNECTION & SWEAT ADAPTOR (1.6 GPF) *** WALL SIZE REQUIRED
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
XTREME ICE MAKER (1230 SERIES)
Anoka, MN. 0 Telephone -00--00 Facsimile -00--0 XTREME ICE MAKER (0 SERIES) MODEL NO. 00 00 00 00 00 00 0 Distributed By: Commercial Refrigeration Service, Inc. http://www.corneliusparts.com http://www.icecubes.net
Flow VA 500/
VA 500/ 520 Verbrauch 79 What are the advantages of the flow measuring technology of CS Instruments? 1) 500 is mounted by means of a standard 1/2 ball valve. During mounting and dismounting the safety
DWV - PVC. PVC Drain, Waste & Vent Fittings. Includes: DWV - PVC - through 8 HVAC. List Prices
Discount Codes 07 DWV-PVC through 8 22 VAC Corrected Pricing hi-lited in Yellow DWV - PVC PVC Drain, Waste & Vent Fittings Includes: DWV - PVC - through 8 VAC s Effective: July 1, 2014 x FPT KEY:...ub
Sam Roberts & Associates, Inc. South Texas 3300 Capitol Houston, Texas Fax:
Solvent Weld Sewer Fittings SDR 35 Injection Molded in Sizes 3 12 Fabricated in Sizes 10 36 P Applications Plastic Trends has the broadest product offering of Solvent Weld Sewer fittings in the industry.
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
COPPER WATER TUBE 030-1
030-1 COPPER WATER TUBE TYPE K - GREEN TYPE L - BLUE TYPE M TYPE DWV SIZE STRAIGHT COIL OXYGEN STRAIGHT COIL RED YELLOW LENGTH SERVICE LENGTH LENGTH LENGTH 1/8" 3.53 1/4" 3.51 3.46 3.78 3.12 3.05 3/8"
Automatic Pipe Routing
ICCAS2013 in Busan Automatic Pipe Routing To Avoid Air Pockets Kyushu University Dep. of Marine Systems Engineering Yuto Ando, Hajime Kimura Outline Introduction 1. Approach 2. Air Pockets 3. Simulations
The Z140/MODEL 340 Whirlpool Spa
The Z0/MODEL 0 Whirlpool Spa PARTS CATALOG MODEL #H0000 ISSUE DATE: 0/99 CATALOG #K0000E CONTENTS Z0/0 Reference Discharge Plumbing Suction Plumbing Air Line Piping Skirt Assembly Other Items Available
Repair Parts List DISHWASHER MODEL NUMBER WC202. When requesting service or ordering parts, always provide the following information:
Repair Parts List DISHWASHER MODEL NUMBER WC202 When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
Specialist Drainage. Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system. Specialist Drainage
Durapipe Vulcathene Mechanical Piping System Vulcathene - Laboratory chemical drainage system Vulcathene is a completely purpose-designed chemical resistant plumbing system that has been specified and
DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE OCTOBER 1, 2018 DWV-PVC 2 x FPT x MPT
STEEL NIPPLES BLACK BRASS & GALVANIZED FITTINGSSCH 40
1/8" DIMETER STEEL NIPPLES BLCK BRSS & GLVNIZED SCH 40 Length Box/Case pprox. Galv 56-001 1.89 X Close (3/4") 5/600 0.02 57-001 1.34 56-002 1.95 x 1-1/2" 5/600 0.03 57-002 1.51 56-003 2.19 x 2" 5/600 0.04
DWV Systems Submittal Data Sheet. Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction
Submittal Data Sheet Project: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date < STANDARDS > System 15 CSA B181.2 System XFR CAN/ULC S102.2 introduction PVC is the
F250 F550
AIR INNOVATEDTM Illustrated Parts List for VMAC System V900111 Ford 6.8 L Triton V 10 2011 2014 F250 F550 www.vmacair.com Illustrated Parts List for VMAC System V900111 FORD 6.8 L TRITON V10 2014-2011
"PVL" SERIES. Fixed Displacement - Single PVL1. Up to 5 MPa (730 PSI), 10.6 cm /rev (.647 CU.IN./rev)
"PVL" SERIES Fixed Displacement - Single PVL Up to 5 (70 ), cm /rev (7 CU.IN./rev) Pub. EC-0 The PVL series single pumps are designed for use with small size machine tools requiring comparatively low pressure