Viega PEX Manifold Plumbing Systems
|
|
|
- Francis Cameron
- 5 years ago
- Views:
Transcription
1 Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100 psi at 180ºF and 160 psi at 73ºF. MANABLOC - PEX Press DESCRIPTION Mounting Straps RED COILS 1/2" x 100' Bronze Port Adapters Homerun Distribution Manifold Factory assembled with valves Color coded ports for hot and cold water Viega PEX Press Fittings 1/2" x 300' /4" x 100' /4" x 300' RED STRAIGHT LENGTHS 1/2" x 20' /4" x 20' ULTRA RED (Protection against UV rays up to 6 months) 1" x 300' Coil " x 20' Straight Length Ports 6 Hot / 8 Cold /2" Ports 9 Hot / 15 Cold /2" Ports 14 Hot / 22 Cold /2" PEX Press Elbow Polymer Press BLUE COILS 1/2" x 100' /2" x 300' /2" x 500' /4" x 100' /4" x 300' MINIBLOC - PEX Press Bronze Port Adapters Zoning manifold for combination systems Factory assembled with valves Color coded ports for cold water /2" /4" " PEX Press Elbow - Drop Ear Bronze Press x F NPT BLUE STRAIGHT LENGTHS 4 Ports 1/2" x 20' /4" x 20' ULTRA BLUE (Protection against UV rays up to 6 months) 1" x 300' Coil " x 20' Straight Length WHITE COILS 1/4" x 100' WHITE STRAIGHT LENGTHS 1/2" x 20' /4" x 20' " x 20' /2" Ports /2" PEX Press Supply Adapter Press x MANABLOC Supply Bronze Connects PEX supply lines to MANABLOC and MINIBLOC /4" x 1" " x 1" /2" x 1/2" /4" x 3/4" PEX Press Coupling Polymer Press x Press /2" x 1/2" /2" x 3/4" ULTRA BLACK STRAIGHT LENGTHS 1-1/4" x 20' MANABLOC Cap /4" x 3/4" /4" x 1" " x 1" ICE MAKING TUBING (PE) (Designed for cold water applications only) 1/8" x 100' Coil Port Supply /2" - Port - Zero Lead " - Supply Specifications subject to change without notice.
2 Over 65 years of people serving people! Viega PEX Press Fittings PEX Press Tee Polymer Press x Press x Press /2" x 1/2" x 1/2" /2" x 1/2" x 3/4" /4" x 1/2" x 1/2" /4" x 1/2" x 3/4" /4" x 3/4" x 1/2" /4" x 3/4" x 3/4" " x 1/2" x 1/2" " x 1/2" x 1" " x 3/4" x 1/2" " x 3/4" x 3/4" " x 3/4" x 1" " x 1" x 1/2" " x 1" x 3/4" " x 1" x 1" PEX Press Adapter Bronze Male Press x M NPT /2" x 1/2" /4" x 3/4" " x 3/4" " x 1" /4" x 1-1/4" Bronze Female Press x F NPT /2" x 1/2" /4" x 1/2" /4" x 3/4" PEX Press Adapter Bronze ProPress Press x P /2" x 1/2" /2" x 3/4" /4" x 1/2" /4" x 3/4" " x 1" /4" x 1-1/4" Bronze Press x Copper (Male) /2" x 1/2" /4" x 1/2" /4" x 3/4" /4" x 1" " x 1" /4" x 1-1/4" PEX Press Test Plug Polymer Press /2" /4" " PEX Press Tub Els Copper Press x Copper Length: 3" x 6" /2" x 1/2" PEX Press Stub-Out Copper Elbow Press x Copper Length: 3-1/2" x 8" /2" x 1/2" Copper Straight Press x Copper Length: 8" /2" x 1/2" Viega PureFlow PEX Press Stop Valve Chrome Plated Press x CTS (OD) 1/4 Turn Sleeve NOT included /2" x 1/4" (3/8") PEX Press Ball Valve Brass Press x Press Sleeve NOT included /2" x 1/2" Viega PEX Accessories Finishing Sleeve Sleeve is 3-1/2" long /2" Plastic Bend Supports Not for use with FostaPEX /2" PEX Press Tools Ratcheting Design /2" Yellow /4" Blue " Orange
3 PEX Fittings Twist & Lock Fittings Male Adapter x NPT End Cap Union Tee 1/2" /4" " Reducing Tee 1/2" x 1/2" x 3/4" /4" x 1/2" x 1/2" /4" x 1/2" x 3/4" /4" x 3/4" x 1/2" º Union Elbow 1/2" x 1/2" /4" x 3/4" " x 1" Swivel Connector x NPS Female 1/2" x 1/2" Swivel Elbow x NPS Female 1/2" x 1/2" Coupler 1/2" /4" Stackable Tee 3/4" x 3/4" x 1/2" /4" x 3/4" x 3/4" Pipe Insert 1/2" /4" Heavy Duty Pipe Cutter 1/2" /4" " /2" /4" " JG HDC Reducer Stem x Pipe (CTS) Reducing Coupler 3/4" x 1/2" Test Cap 3/4" x 1/2" " x 3/4" Drop Ear Elbow x NPT 1/2" " Springfield Champaign Peoria Marion /2" x 1/2" Bloomington St. Louis Specifications subject to change without notice.
4 Over 65 years of people serving people! PEX Fittings Push-In Fittings Angle Stop Adapter Valve Thread Male Compression Reducing Coupling Male Connector NPTF Thread 1/4" /8" /8" x 3/8" x 1/4" /8" x 3/8" x 3/8" Shut-off Valve Speedfit to Speedfit U058LF SB U058LF 3/4" x 1/2" U060LF 1" x 3/4" SB013528* 1-1/4" x 1" SB014135* 1-1/2" x 1-1/4" SB015441* 2" x 1-1/2" Union Connector Connectors 1/4" /8" Reducing Union Connector 3/8" x 1/4" Union Tee 1/4" /8" Pipe Insert 1/2" /4" U072LF SB113532M Female (FNPT) U072LF 1/2" x 1/2" U088LF 3/4" x 3/4" U094LF 1" x 1" Male (MNPT) U120LF 1/2" x 1/2" U134LF 3/4" x 3/4" U139LF 3/4" x 1" /4" /8" Push-Fit Fittings U140LF 1" x 1" SB113532M* 1-1/4" x 1-1/4" SB114140M* 1-1/2" x 1-1/2" SB115450M* 2" x 2" Union Elbow Elbow Coupling 1/4" /8" U008LF SB0135 U008LF 1/2" x 1/2" U248LF SB 0235 U248LF 1/2" x 1/2" U256LF 3/4" x 3/4" U260LF 1" x 1" Faucet Connector UNS Thread U016LF 3/4" x 3/4" U020LF 1" x 1" SB0135* 1-1/4" x 1-1/4" SB0235* 1-1/4" x 1-1/4" SB0241* 1-1/2" x 1-1/2" SB0254* 2" x 2" SB0141* 1-1/2" x 1-1/2" SB0154* 2" x 2" /8" x 7/16"
5 Over 65 years of people serving people! PEX Fittings Push-Fit Fittings Angle Stop Disconnect Clip Tee LF 1/2" x 3/8" LF 1/2" x 1/4" U710 1/2" U712 3/4" U714 1" Straight Stop PEX Fittings Plastic U362LF 1/2" x 1/2" x 1/2" U370LF 3/4" x 3/4" x 3/4" U374LF 1" x 1" x 1" Reducing Tee LF 1/2" x 3/8" LF 1/2" x 1/4" PEX Adapter Plastic PEX x MIP U412LF 3/4" x 3/4" x 1/2" U444LF 3/4" x 1/2" x 3/4" U454LF 3/4" x 1/2" x 1/2" End Cap U514LF SB0435 U514LF 1/2" U518LF 3/4" U520LF 1" /4 Turn Angle Stop 23058LF 1/2" x 3/8" LF 1/2" x 1/4" /4 Turn Straight Stop 23057LF 1/2" x 3/8" /2" x 1/2" /4" x 1/2" /4" x 3/4" " x 1" PEX Coupling Plastic PEX x PEX 1/2" x 1/2" /4" x 1/2" /4" x 3/4" " x 1" SB0435* 1-1/4" SB0441* 1-1/2" SB0454* 2" Ball Valve PEX Elbow Plastic PEX x PEX Large Diameter Stiffener SBTL35 1-1/4" SBTL41 1-1/2" SBTL54 2" LF SBBV LF 1/2" x 3/8" LF 1/2" x 1/4" LF 1/2" x 3/8" SBBV35 1/2" x 1/4" SBBV41 1/2" x 3/8" SBBV54 1/2" x 1/4" /2" x 1/2" /4" x 3/4" " x 1"
6 PEX Fittings PEX Fittings Plastic Notes PEX Test Plug Plastic PEX 1/2" /4" " PEX Tee Plastic PEX x PEX x PEX 1/2" x 1/2" x 1/2" /4" x 1/2" x 1/2" /4" x 1/2" x 3/4" /4" x 3/4" x 1/2" /4" x 3/4" x 3/4" /4" x 3/4" x 1" " x 3/4" x 3/4" " x 3/4" x " x 1" x 1/2" " x 1" x 3/4" " x 1" x 1" Brass PEX x PEX x PEX 1" x 3/4" x 1/2" PEX Stub-Out Copper Elbow PEX x Copper With Nailing Flange 1/2" x 3-1/2" x 6" Specifications subject to change without notice.
PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
Viega Pexcel Water System
Viega Pexcel Water System PAGE 57-1 ViegaPEX Ultra ViegaPEX Ultra is manufactured to ASTM F876/F877 standards and listed to ANSI/ NSF Standards 14 and 61. It is chlorine resistance rated for both traditional
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
PureFlow Zero Lead PEX manifold plumbing systems Number one rated PEX plumbing manifolds
PureFlow PureFlow PureFlow Zero Lead PEX manifold plumbing systems Number one rated PEX plumbing manifolds 119 Stock Qty Approx. Zero Lead PEX Manifold Plumbing Systems ZERO LEAD MANABLOC -COMPRESSION
Viega Product Catalog. May The global leader. The global leader in plumbing, heating and pipe joining systems
Viega Product Catalog May 2014 The global leader The global leader in plumbing, heating and pipe joining systems Viega One source, multiple solutions Designed for peace of mind Viega manufactures and distributes
Viega Product Catalog PEX Press and PEX Crimp April The global leader. The global leader in plumbing, heating and pipe joining systems
Viega Product Catalog PEX Press and PEX Crimp April 2015 The global leader The global leader in plumbing, heating and pipe joining systems Viega One source, multiple solutions Designed for peace of mind
SharkBite 25 W ARRANTY Sh YEAR arkbite
25 SharkBite WARRANTY YEAR SharkBite The SharkBite Plumbing System SharkBite has established a reputation as one of Australia s best plumbing systems. Quick & easy to use. Fittings for PEX and Copper Pipe
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214
Potable and Hydronic Pex System CANADA PEX-C0315R MARCH 2015 SUPERSEDES PEX-C0214 TABLE OF CONTENTS PEX PIPE page category SUPERPEX ultra resistant potable water pipe 3 C-54 OXYPEX oxygen barrier radiant
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories
USA Whole Price List
USA Whole Price List Tips & Tricks How to Use the BMI Parts Catalog 1. Using the Table of Contents This reference page not only provides a listing of price lists and page numbers, it also links to each
CPVC Hot and Cold Water System
CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard
COPPER WATER TUBE 030-1
030-1 COPPER WATER TUBE TYPE K - GREEN TYPE L - BLUE TYPE M TYPE DWV SIZE STRAIGHT COIL OXYGEN STRAIGHT COIL RED YELLOW LENGTH SERVICE LENGTH LENGTH LENGTH 1/8" 3.53 1/4" 3.51 3.46 3.78 3.12 3.05 3/8"
Air-Pro Blue Polyethylene (PE) Compressed Air Piping System
- Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR),
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Compressed Air Technical Information 562 Compressed Air Fittings 563 Brass Compressed Air Fittings 564 Compressed Air Pipe & Accessories 565 ELEVEN Accessories
WITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
Timken Lubricant Delivery Systems. Friction management solutions to keep systems running smoothly
Timken Lubricant Delivery Systems Friction management solutions to keep systems running smoothly SM G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication is
PVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
Duo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
5000 Sc. Cleaning Solution Generator Parts Manual. North America / International. DM20008 Rev. 02 (6-2012) *DM20001*
5000 Sc Cleaning Solution Generator Parts Manual North America / International www.tennantco.com DM20008 Rev. 02 (-202) *DM2000* A B Ref Part No. Serial Number Description Qty. 828 (000000- ) Bracket Wldt,
Copperfit Industries Inc E. 9th St. Pomona CA 91766
Copperfit Industries Inc. 1280 E. 9th St. Pomona CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM VALVES AND HOSE BIBB Effective Date: Jan 2018 Version: BV201801 Spread
Quick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems
Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10
GEM TOOL ORDER FORM SAUGERTIES, NY 12477
ALUMINUM PIPING UNION 20 MM 19.7 D1 ALR TU20L6 $ 52.54 20 MM 4A ALR UN 20 $ 9.77 25 MM 19.7 D2 ALR TU25L6 $ 63.38 25 MM 4B ALR UN 25 $ 12.17 32 MM 19.7 D3 ALR TU32L6 $ 97.50 32 MM 4C ALR UN 32 $ 17.24
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing Why Gardner Denver? Simply stated There is no equal Quick-Lock from Gardner Denver has taken piping systems to a new level. Without compromising any structural
Wavin Hep 2 O Flexible PB Push-Fit plumbing system
Water distribution Heating and cooling PRODUCT LIST Wavin Hep 2 O Flexible PB Push-Fit plumbing system Contents 1 Hep2O Pipe Page 3 2 Hep2O Fittings Page 4 3 Hep2O Accessories Page 14 4 Making connections
CH-PVDF RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS. Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov.
RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS CH-PVDF-1115 Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov. 25, 2013 Suggested list prices subject to change without notice. UPC
SOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
WL7 SPARKLING MAIN DRAWING WL7 FW SPARKLING. Wetted, Ice Bath and Firewall Drawings - see next page
SPARKLING MAIN DRAWING FW SPARKLING Wetted, Ice Bath and Firewall Drawings - see next page FW Manual Page 38 Revision: 10 12 2018 Ice Bath WETTED, FIREWALL AND ICE BATH DRAWINGS FW SPARKLING Firewall Wetted
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
MK-MANTA I. Model MK-Manta I Core Drill Owner s Manual Parts List & Operating Instructions. serial number CAUTION
please record the serial number of your drill in this block. serial number For your one (1) year warranty to be effective, complete the warranty card (include the serial number) and mail it in as soon
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
ALRO PRODUCTS INTERNATIONAL, LLC Copper Fittings. Product # Ref. Numbers Nominal I.D. Size Refrigeration O.D. Size List Price ADAPTER - C X FIP
Page 1 of 12 ADAPTER - C X FIP P5312 603 1/4 3/8 X 1/4 $ 9.91 P4656 603 3/8 1/2 X 3/8 $ 10.36 P4654 603 1/2 5/8 X 1/2 $ 5.26 P4657 603 3/4 7/8 X 3/4 $ 7.22 P4658 603 1 1-1/8 X 1 $ 16.52 P4659 603 1-1/4
May Wavin Hep2O Push-fit plumbing system. Product List FLEXIBLE PB PUSH-FIT PLUMBING SYSTEM. Solutions for Essentials
May 2013 Wavin Hep2O Push-fit plumbing system Product List FLEXIBLE PB PUSH-FIT PLUMBING SYSTEM Wavin Hep2O - Product List Content 1 Hep2O PB pipe page 3 2 Hep2O fittings page 4 3 Hep2O accessories page
HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages
HD22 and HD30 Service Parts
HD and HD0 Service Parts This is the list of service parts and wiring diagrams for all versions of these two hotel dispensers. Pay close attention to the voltage and/or cycles to be sure of ordering the
15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
MICROJET IRRIGATION SYSTEMS
CATALOGUE 01 September 2014 MICROJET IRRIGATION SYSTEMS P.O. Box 279, Eppindust, 7475, South Africa Tel : +27 (0)21 535 1310 Fax : +27 (0)21 535 1166 email : info@microjet.co.za http://www.microjet.com
Call us on
RAINWATER & PLUMBING 02 Rainwater & Plumbing Half Round 112mm, Rainwater System White, Black, Brown, Grey ½ Rd Gutter 4m R10002 112/68mm 11.95 ½ Rd Fascia R10007 1.00 ½ Rd - C/Iron Ogee Adapter L/H R10983
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
PE Electrofusion Systems for Gas and Water Catalog
PE Electrofusion Systems for Gas and Water Catalog I S S U E D A T E : J A N U A R Y 2 0 1 7 PE ELECTROFUSION SYSTEMS For Gas and Water Applications TABLE OF CONTENTS Genesis F3 Electrofusion Processor............................................
Pipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
PE Electrofusion Systems for Water Catalog
PE Electrofusion Systems for Water Catalog E L E C T R O F U S I O N S Y S T E M S PE ELECTROFUSION SYSTEMS For Water Applications IPEX PE ELECTROFUSION SYSTEMS FOR WATER The smarter, more reliable way
MICROJET IRRIGATION SYSTEMS
CATALOGUE 01 August 2010 MICROJET IRRIGATION SYSTEMS P.O. Box 279, Eppindust, 7475, South Africa Tel : +27 (0)21 535 1310 Fax : +27 (0)21 535 1166 email : queries@microjet.co.za http://www.microjet.com
Accessories for Lubrication Systems Product Catalogue
Accessories for Lubrication Systems Product Catalogue Productivity is key in today s global economy. Proper lubrication increases uptime and makes maintenance routines simple. Accessories for Lubrication
SEPTEMBER Voted Top Product of 2010 by readers of PHPI Magazine
Polybutene Plumbing & Heating Price list SEPTEMBER 2011 Voted Top Product of 2010 by readers of PHPI Magazine 0800 043 8883 The Buteline Plumbing System is an integrated flexible plumbing system incorporating
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
Combi-System. Composition pipe Copipe
Combi-System Composition pipe Copipe no. Composition pipe Copipe white rolls DN 10 x 2.0 mm length per roll 50 m 150 10 54 length per roll 100 m 150 01 54 length per roll 200 m 150 02 54 DN 12 16 x 2.0
Plumbing Brass Specification Guide
Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one
Poly-Tite Fittings. Order By part number and name.
oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer
AHEAD OF THE FLOW. NIBCO Flexible Piping Systems
CATALOG C-FLEX-0517 AHEAD OF THE FLOW NIBCO Flexible Piping Systems Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products
PNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 202 08.2012 Manual Part# 161117 Caution: Read all safety and operating instructions before using this equipment.
UNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and
Quality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
FITTINGS & CONNECTORS PRICE LIST EFFECTIVE JANUARY 1, 2018
N E T A F I M U S A FITTINGS & CONNECTORS PRICE LIST EFFECTIVE JANUARY, 208 2 FITTINGS & CONNECTORS PRICE LIST JANUARY, 208 WWW.NETAFIMUSA.COM FITTINGS & CONNECTORS THINWALL DRIPLINE FITTINGS Twist-Lock
Hello MLC Goodbye copper.
Hello MLC Goodbye copper. The multi-layered plumbing system with multiple benefits For more information visit www.uponor.com The multi-layered plumbing system with multiple benefits MLC Press-Fit is the
Pipe Swivels. The Fitting Authority
Pipe Swivels The Fitting Authority 0507 007 007 3507 Straights 45 Elbows 307 307 507 5507 07 NPT / NPSM Swivel 90 Elbows 5607 NPT / NPSM Swivel Long Drop 07 077T NPSM Swivel / NPSM Swivel / NPSM Swivel
10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED
STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3
10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
1220 Self-Contained Carpet Extractor
0 Self-Contained Carpet Extractor Operator and Parts Manual TENNANT COMPANY Commercial Products RANSOM STREET HOLLAND MI U.S.A. FAX: 00 0 CUSTOMER SERVICE: 00-00 Rev. 00 (-) ELECTRICAL DIAGRAMS Tennant
PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
Sterisil Ac. Installation Manual Sterisil.com { 1 }
Sterisil Ac Installation Manual 719 622 7200 Sterisil.com { 1 } { 2 } Table of Contents Introduction 4 Sterisil Ac Features 5 Installation Instructions 6 Maintenance 10 Troubleshooting and FAQ 12 { 3 }
Copper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Jan. 23, 2017 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 21.04 25 3000 HL15-105-0001 1/8 1/4 x 1/8
Copper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Feb. 9, 2015 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 19.36 25 3000 HL15-105-0001 1/8 1/4 x 1/8
standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
brass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
ARTPLASTICS PRODUCT BROCHURE INNOVATIVE PLUMBING FITTINGS. BOUNTYBRASSWARE Designer Bathroom Fittings. Innovative Plumbing Fittings
PRODUCT BROCHURE INNOVATIVE PLUMBING FITTINGS Innovative Plumbing Fittings BOUNTYBRASSWARE Designer Bathroom Fittings ABOUT US Art Plastics commenced its operations in Bayswater, Perth in February 19.
Kamlok Series. The World s Most Popular Cam and Groove Quick Disconnect
Kamlok Series The World s Most Popular Cam and Groove Quick Disconnect OPW Engineered Systems Kamlok Quick Disconnects are the industry standard in cam and groove couplers for safety and ease of use. All
AIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
wd-2
wd-2 wd-2 wd-4 wd-5 wd-6 wd-7 wd-8 wd-9 wd-10 wd-11 wd-12 wd-13 Minimum/Maximum Operating Pressures Minimum/Maximum Operating Temperatures AC Adapter: Supply Voltage Supply Frequency Output Voltage Output
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
PRO PLUMBERS SUMMER SPECIALS Prices good through September 30, 2018
Order On Account or With Credit Cards OVER 25,000 ITEMS IN STOCK PRO PLUMBERS SUMMER SPECIALS Prices good through September 30, 2018 UPS SHIPPING CHARGES ARE FREE*...On All Orders That Are Over $143 net
SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL WATER AND GAS CRIMP EDITION: 0001
WATER AND GAS CRIMP TM SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL EDITION: 0001 2 WATER AND GAS CRIMP STESSO PEX PN-16 PE-Xb Pipe is a Cross Linked Polyethylene and is
Terminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
Ø mm. SYSTEM KAN-therm. Steel. Traditional material in modern technology TECHNOLOGY OF SUCCESS ISO 9001
Ø 12-108 mm SYSTEM KAN-therm Steel Traditional material in modern technology TECHNOLOGY OF SUCCESS System KAN-therm Steel - assortment press carbon steel pipe, zinc coated - bar 6 m 12 1,2 * 620459.4 6/624
RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment
RMI-RMP L100.05 us B RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment STÄUBLI CORPORTION P.O. BOX 189 - DUNCN - S.C. 29334 PHONE 864/433-1980 TOLL-FREE NUMBER
8100, 8200, , 8202, 8203, 8204, 8205, 8206
800, 8200, 8300 820, 8202, 8203, 8204, 8205, 8206 W R A, O USA T: 800 32 7950 440 998 2788 F: 440 992 2925... 023208 2 INSTRUCTIONS FOR 3/4,, -/4 DIAMETER TAPS FIGURE A B C D E F G HOT TAP SPINDLE HOT
PE PIPE & FITTINGS LDPE PIPE
LDPE PIPE All LDPE pipe is made with 100% virgin material ECO LDPE is made with 100% re-grind virgin material Pipes rated at 4 bar at 20 0 C No 2 for years All LDPE pipe is made and tested in our own factory
MIXERS, BASIN & SINK FITTINGS DELUXE RANGE
MIXERS, BASIN & SINK FITTINGS 1. C.P. PILLAR COCK SWAN NECK DELUXE... 1125/- EACH 2. C.P. PILLAR COCK SWAN NECK UNIVERSAL... 1170/- EACH 3. C.P. PILLAR COCK SWAN NECK J BEND... 1125/- EACH 4. C.P. SINK
Level 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH. Trading as UPONOR Q & E
Level 1 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Uponor GmbH Trading as UPONOR Q & E the right to use the WaterMark as shown above in conjunction
Composite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
BRASS BRASS FITTINGS 90 0 FEMALE ELBOW 90 0 FORGED FEMALE ELBOW 45 0 FEMALE ELBOW UNION TEE UNION FORGED TEE SAE# Approx. Wt. Lbs.
RSS FITTINGS RSS 90 0 FEMLE ELOW 2200P 3500 302 200 Part # Thread Size pprox. 28-001 1/8 0.55 0.56 0.09 28-002 1/4 0.78 0.68 0.13 28-003 3/8 0.84 0.81 0.16 28-004 1/2 1.09 1.00 0.34 28-005 3/4 1.16 1.25
nls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
TUB / SINK TUB SPOUT TUB SPOUT TUB SPOUT CHROME - DIE CAST CHROME PLATED ZINC BODY. TAPPED 1/2" IPS TUB SPOUT TUB SPOUT TUB SPOUT TUB SPOUT TUB SPOUT
ADJUSTABLE SLIDE CONNECTOR BATH SPOUT. PLATED ZAMAK, 1-3/4" ADJUSTABLE TELESCOPING FIT. FAST INSTALLATION FOR 1/2" COPPER STUB. Part #: Finish: 18-225 Chrome 18-340 Brushed Nickel DIE CAST CHROME PLATED
D ISCONNECTS Q UICK. Autolok Quick Disconnects. Kamlok Quick Disconnects
Q UICK D ISCONNECTS Autolok Quick Disconnects Kamlok Quick Disconnects Q UICK D ISCONNECTS OPW Engineered Systems offers a comprehensive line of quick disconnect products, including Autolok and the world
Wrot and Cast Pressure Fittings
Wrot and Cast Pressure Fittings 600 Series Wrot 700 Series Cast Adapters................................................ 6-8 Air Chambers............................................. 8 Bulkhead Fittings..........................................
National Light Sources Pty Ltd Electrical Accessories - Date 8th April, Coombes Drive, Penrith, NSW, 2750 Australia
National Light Sources Pty Ltd 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical
BSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
Illustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
High Purity Laboratory Faucets
High Purity Laboratory Faucets GNF 0 GNF 0 5 /4 5 /4 /2 /2 2 /8 2 /8 Welded ssembly Deck mounted Laboratory Faucet with integral vacuum breaker manufactured Polypropylene per STM D 40 PVDF per STM D 222.
MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Parts Manual Fittings - Brass
Parts Manual Fittings - Brass Page 1 of 12 Item No. CCP Part# Mfg. Part# CONA Material# Description 1.01 135118 LF41S-8 150010308 NUT,MILLED,SHORT TYPE,1/2 TUBE, LL 1.02 542780 308317 150004237 NUT,SHORT,1/4
ACCESSORIES. Accessories for distance and position sensors Magnets for HLT 1000, HLT 2000, HNT Electrical accessories HLT
Accessories ACCESSORIES Accessories to suit every sensor! Whether it's electrical connectors, mechanical adapters or the instrument mounting clamps, the wide range of products from HYDAC offers solutions