CAL-CERT COMPANY 6709 SOUTHEAST LAKE ROAD MILWAUKIE, OREGON 97222

Transcription

1 This is to attest that CAL-CERT COMPANY 6709 SOUTHEAST LAKE ROAD MILWAUKIE, OREGON Calibration Laboratory CL-108 has met the requirements of AC204, IAS Accreditation Criteria for Calibration Laboratories, and has demonstrated compliance with the ISO/IEC Standard 17025:2005, General requirements for the competence of testing and calibration laboratories. This organization is accredited to provide the services specified in the scope of accreditation maintained on the IAS website ( This certificate is valid up to June 1, (See laboratory s scope of accreditation for fields of calibration and accredited calibration.) This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See for current accreditation information, or contact IAS at C.P. Ramani, P.E., C.B.O President

2 IAS Accreditation Number CL-108 Accredited Entity Address 6709 SE Lake Rd. Milwaukie, OR Contact Name Marshall Doyle, President Telephone (503) Effective Date of Scope May 19, 2017 Accreditation Standard ISO/IEC 17025:2005 CALIBRATION AREA TECHNIQUE, REFERENCE STANDARD, Dimensional Micrometers Calipers, Micrometers Calipers, Micrometers Calipers, Micrometers Dial Indicators LVDTs Extensometers/Deflectometers Displacement Measurement 0 in. to 1 in./ in. 0 in. to 12 in./ in. 12 in. to 24 in./ in. 24 in. to 48 in./ in. 0 in. to 6 in./ in. 0 in. to 1 in./ in. 0 in. to 1 in./ in. 0 in. to 24 in./ in. 600 µin. 800 µin µin µin. 65 µin. 60 µin. 114 µin. 20 µin. CP-010, Gage Blocks CP-008, CP-010, Gage Blocks CP-008, CP-010, Gage Blocks CP-008, CP-010, Gage Blocks CP-009, Gage Blocks CP-009, Gage Blocks CP-007, Linear Calibrator CP-115 Surface Plates (Metal & Granite) up to 60 ft. 2 area 2 µin per inch of diagonal CP-128, Leveling System Pin gages Thread gages/wires Plug gages Radius gages, Angle 0 in. to 4 in./ in. 0 in. to 4 in./ in. 0 in. to 4 in. / in. 0 in. to 4 in. /.0001 in. CP-115, Super Mic, Gage blocks CP-115, Super Mic, Gage blocks CP-115, Super Mic, Gage blocks CP-115, Optical Comparator, Gage blocks Micrometer standards 0 in. to 20 in. / in. 60 µin. CP-115, Height Gage, Gage blocks, Surface Plate Gage blocks 0 to 4 in. CP-115 Gage block comparator, Master Gage blocks Height gages Rulers 0 in. to 40 in. / in. 0 in. to 84 in. / in. 60 µin. 180 µin. CP-115, Surface plate, Gage blocks CP-115, Gage blocks Tape measures Straight edges 0 ft. to 100 ft. 0 in. to 25 in. / in in. 60 µin. CP-115, Standard Rule, Gage blocks CP-115, Super Mic, Gage blocks Thermal Ovens,,Freezers, Environmental Chambers, Autoclaves, Water baths, Sealers -200 C to 600 C 1.2 C CP-011, Thermocouple/RTD Meters Thermometers, Digital (source) -200 C to 600 C 1.2 C CP-012, Thermocouple/RTD Meters Thermometers -200 C to 300 C 0.01 C CP-012, RTD Meters/probes/baths Thermocouple (Source and Read) International Accreditation Service, Inc Saturn Street, Suite 100, Brea, California U.S.A Telephone IASInfo@iasonline.org Page 1 of 7

3 Type B Type E Type J Type K Type N Type R Type S Type T 1200 F to 3200 F/0.1 F -400 F to 1800 F/0.1 F -200 F to 1200 F/0.1 F -300 F to 2400 F/0.1 F -300 F to 2350 F/0.1 F 30 F to 3200 F/0.1 F 30 F to 3200 F/0.1 F 400 F to 600 F/0.1 F 0.12 F 0.31 F 0.13 F IR Thermometers / Pyrometers 50 to 900 C 0.11 C CP-012, Black body, PRT, Reference pyrometer Temperature Uniformity up to 60 channels 0 to 2400 F 0.2 F CP-011, Data loggers, thermocouples AMS 2750 and CQI-9 Relative Humidity 20% to 95% 1% CP-031, Digital Hygrometer Hydrometry Specific Gravity (Relative Density) Hydrometers and Equivalent Values in Other Hydrometer Scales: Density (kg/m 3, kg/l), Baume, Brix, Proof Mechanical Pressure Gages and Transducers Pressure Gages - Nitrogen Vacuum Manometers, Absolute Pressure (>0.631 to 1.475) SG (>1.475 to 2.000) SG 0 to 10,000 psi/1 psi 0 to 3,000 psi/0.01 psi 0 to 30 in.-hg 1000 mm-hg to 0 mm-hg ABS SG SG 0.57 psi 0.57 psi 0.75 in.-hg 0.1% IR CP-020 Hydrometer Standards, PRT and ASTM E126 CP-003, Pressure Calibrator CP-003, Pressure Calibrator CP-005, Digital Manometer CP-005, Digital Manometers Force Load Cells-compression Load Cells-tension Force Devices and Machines -compression Force Devices and Machines -tension 0 to 600,000 lbf 0 to 200,000 lbf 0 to 1,000,000 lbf 0 to 200,000 lbf Torque Wrenches, Screw Drivers, Multipliers 0 to 100 lb.-in./ lb.-in. >100 lb.-in. to 750 lb.- in./ lb.-in. 0 lb.-ft. to 250 lb.- ft./0.01 lb.-ft. >250 lb.-ft. to 1,000 lb.- ft./ 0.01 lb.-ft. 0.02% IR 0.02% IR 0.05% IR 0.05% IR 0.04% IR 0.04% IR 0.04% IR 0.04% IR CP-001, ASTM E 74, Load Cells/Weights CP-001, ASTM E 74, Load Cells/Weights CP-001, ASTM E 4, Load Cells/Weights CP-001, ASTM E 4, Load Cells/Weights CP-006 Torque Transducers CP-006 Torque Transducers CP-006 Torque Transducers CP-006 Torque Transducers CL-108 Page 2 of 7

4 Rockwell Hardness HRA Scale HRB Scale HRC Scale HRE Scale HRF Scale HR15N Scale HR30N Scale HR45N Scale HR15T Scale HR30T Scale HR45T Scale 0.8 HRA 1.6 HRB 1 HRC 1.9 HRE 1.6 HRF 0.8 HR15N 1.2 HR30N 0.8 HR45N 1.3 HR15T 1.3 HR30T 2.2 HR45T Indirect Verification of Micro Hardness Vickers 100 to 249 HV 250 to 600 HV > 600 HV 12.0 HV 5.3 HV 29 HV CP-004, Blocks Indirect Verification of Micro Hardness -- Knoop 100 to 600 HV >600 to 1100 HV 7.00 HV 17 HV CP-004, Blocks Brinnel Hardness 320 HBW 1.8 HBW CP-014 Brinnel Hardness Blocks Optical Comparator Various ranges up to 50x 18 µin. CP-064, Standards Balances/Scales Up to 150 kg Up to 5000 lb. 3.5 g 0.5 lb. CP-002, Class 1, 4 & F Weights CP-002, Class 1, 4 & F Weights Volume - Volume Measurement Up to 15 ft % CP-038 Thermometer, Balance Electrical Time Timers, Stop Watches 0 to 10 hrs Up to 24 hours 0.7 seconds CP-032 Digital stopwatch CP-032 VWR Bench Timer/Stopwatch/Data Logger RPM (indirect) 99,999 rpm 0.005% IR Electrical DC Voltage Source Up to mv 330 mv to V (% of RDG + Units) 0.006% + 3 µv 0.005% + 5 µv CL-108 Page 3 of 7

5 3.3 V to V 33 V to V 330 V to 1020 V 0.005% + 50 µv % µv % µv DC Current Source Electrical (continued) AC Voltage Source Up to ma 3.3 ma to ma 33 ma to ma 330 ma to A 2.2 A to 11 A 1.0 mv to mv (0.013% μa) (0.01% μa) (0.01% μa) (0.03% + 44 μa) (0.06% μa) (0.35% + 20 µv) (0.15% + 20 µv) (0.2% + 20 µv) (0.25% + 20 µv) (0.35% + 33 µv) (1% + 60 µv) 33 mv to mv (0.25% + 50 µv) (0.05% + 20 µv) (0.1% + 20 µv) (0.16% + 40 µv) (0.24% µv) (0.7% µv) 0.33 V to V (0.15% µv) (0.03% + 60 µv) (0.08% + 60 µv) (0.14% µv) (0.24% µv) (0.5% µv) 3.3 V to V (0.15% µv) (0.04% µv) (0.08% µv) (0.19% µv) (0.24% µv) 33 V to khz to 10 khz (0.05% μv) (0.08% + 15 μv) (0.09% + 33 μv) Electrical (continued) AC Current Source 330 V to 1000 V ma to Hz to Hz to Hz to 1 khz (0.05% + 80 μv) (0.20% μv) (0.20% μv) (0.25% µa) (0.125% µa) (0.125% µa) (0.4% µa) (1.25% µa) CL-108 Page 4 of 7

6 0.33 ma to Hz to 20 Hz to 45 Hz (0.2% µa) (0.1% µa) (0.1% µa) (0.2% µa) (0.6% µa 3.3 ma to Hz to 20 Hz to 45 Hz (0.2% + 3 µa) (0.1% + 3 µa) (0.09% + 3 µa) (0.2% + 3 µa) (0.6% + 3 µa) 33 ma to Hz to 20 Hz to 45 Hz (0.2% to 30 μa) (0.1% + 30 μa) (0.09% + 30 μa) (0.2% + 30 μa) (0.6% + 30 μa) 0.33 A to Hz to 20 Hz (0.2% μa) (0.1% μa) (0.75% μa) Electrical (continued) Resistance- Generate 2.2 to 11 Hz to 65 Hz to 500 Hz to 1 khz 0 Ω to Ω 11 Ω to Ω 33 Ω to Ω 110 Ω to Ω 330 Ω to kω 1.1 kω to kω 3.3 kω to kω 11 kω to kω 33 kω to kω 110 kω to kω 330 kω to MΩ 1.1 MΩ to MΩ 3.3 MΩ to MΩ 11 MΩ to MΩ 33 MΩ to MΩ 110 MΩ to 330 MΩ (0.06% μa) (0.10% μa) (0.33% μa) (0.012% Ω) (0.012% Ω) (0.009% Ω) (0.009% Ω) (0.009% Ω) (0.009% Ω) (0.009% Ω) (0.009% Ω) (0.011% + 6 Ω) (0.012% + 6 Ω) (0.015% + 55 Ω) (0.015% + 55 Ω) (0.06% Ω) (0.1% Ω) (0.5% kω) (0.5% kω) DC Voltage- Read Up to mv 330 mv to V 3.3 V to V 33 V to V 330 V to 1020 V 0.006% + 3 µv 0.005% + 5 µv 0.005% + 50 µv % µv % µv DC Current- Read Up to ma 3.3 ma to ma (0.013% μa) (0.01% μa) CL-108 Page 5 of 7

7 33 ma to ma 330 ma to A 2.2 A to 11 A (0.01% μa) (0.03% + 44 μa) (0.06% μa) AC Voltage- Read 1.0 mv to mv (0.35% + 20 µv) (0.15% + 20 µv) (0.2% + 20 µv) (0.25% + 20 µv) (0.35% + 33 µv) (1% + 60 µv) 33 mv to mv (0.25% + 50 µv) (0.05% + 20 µv) (0.1% + 20 µv) (0.16% + 40 µv) (0.24% µv) (0.7% µv) 0.33 V to V (0.15% µv) (0.03% + 60 µv) (0.08% + 60 µv) (0.14% µv) (0.24% µv) (0.5% µv) AC Voltage- Read 3.3 V to V (0.15% µv) (0.04% µv) (0.08% µv) (0.19% µv) (0.24% µv) 33 V to khz to 10 khz (0.05% μv) (0.08% + 15 μv) (0.09% + 33 μv) 330 V to 1000 V (0.05% + 80 μv) (0.20% μv) (0.20% μv * Calibration and Measurement Capability is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation (at a confidence level of 95% with a coverage factor of 2) CL-108 Page 6 of 7

8 Other Dimensional Measurement and Verification Activity: Dimensional Measurement and Verification of the following: Sieves, Liquid limit device, Grooving tool, Followers, plunger, metal specimens, Kelly ball, LA Abrasion, Marshall and proctor hammers, platens, Expansion racks, Slump cones, tampers, 123 blocks, Sample splitters Up to 12 in. 600 µin. CP-115, ASTM and AASHTO procedures, Calipers, Rulers, Straight edges, Gage blocks * Calibration and Measurement Capability is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation (at a confidence level of 95% with a coverage factor of 2) CL-108 Page 7 of 7