Mini-DIN Cable and Adaptor
|
|
|
- Nancy Ellis
- 5 years ago
- Views:
Transcription
1 Model CS 63 Mini-DIN Cable and Adaptor Page 1 of 9
2 Features Hi-Pro, NOAHlink and FlexConnect 2 compatible cable & Mini-DIN CS 63 Clip Module / NOAHlink Adaptor #2 Integrated Clip Module - Mini-DIN Cable Integrated NOAHlink - CS 63 Cable Standardized exchangeable disposable cost effective flex circuit connector Flex Strip is easily mounted in the Clip Module 3 leads Contents 1. History Revision 3 2. Mechanical Specifications 4 3. Electrical Specifications 4 4. Material Specifications 5 5. Environmental Conditions 5 6. Recommended Process Parameters 5 7. Mechanical Dimensions 6 8. Electrical Configuration 8 9. Product Specification Form 9 Sonion reserves the right to make changes at any time to improve reliability, function or design, in order to provide the best product possible. Page 2 of 9
3 1. History Revision Revision Number/Date Change from last revision 04 / Feb 03 History Revision added. Clip Module - DIN Cable length corrected to 2,500 mm [98.4 ]. NOAHlink - CS 63 Cable and NOAHlink Adaptor #2 added. 05 / Feb 06 CS 63-1 Flex Strip added. New layout. MT1005.A (07/08) 006/JUL /JUN No technical updates Operational temperature and humidity removed. Storage humidity added. CS 63-1 Flex Strip removed 008/ Updated design and new RoHS logo directive (2011/65/EU) Page 3 of 9
4 2. Mechanical Specifications Clip Module Weight of unit Activation force Retention force, Unit/Flex Strip Lifetime (connection and disconnection) Flex Strip Minimum bending radius of flex Tensile strangth Torsional elasticity of flex Lifetime Insertion Torsion 3. Electrical Specifications Clip Module Continuous current Insulation resistance between leads 2.5 g Typical 15 N Max. 4.5 N Min. 5,000 cycles 1.0 mm Min. 25 N Angle ±90 min. 15 mm Min. 1,500 cycles. ±45 bending angle N load and 5 mm bending radius Min. 500 cycles. Torsion angle ±90 per 15 mm, 5 mm radius of the fixing vice and load 0.5 N Max. 150 ma Min. 1 MΩ Flex Strip Contact resistance Current Peak current (1 sec.) Voltage Insulation resistance between leads Max. 500 mω Max. 150 ma 250 ma Max. 50 V Min. 1 MΩ Page 4 of 9
5 4. Material Specifications All materials comply with RoHS directive (2011/65/EU) Clip Module Housing Contact unit Metal parts Sockets ABS PA CuSn, gold plated Standard CS44 Flex Strip Base material Conductive layer Contact pads Stop guide Polyimid Cu, rolled annealed Gold plated PA Lubricant, glue / seal, and paint specifications are proprietary information. 5. Environmental Conditions Storage temperature Storage humidity -40 to + 60 C 10 to 95% RH 6. Recommended Process Parameters Cleaning: Cleaning solvents Aqua wash (Alpha 2110), Benzine Do not use alcohol-based solvents Page 5 of 9
6 7. Mechanical Dimensions CS 63 Clip Module / NOAHlink Adaptor #2 CS 63 Clip Module - Mini-DIN Cable Page 6 of 9
7 NOAHlink - CS 63 Cable CS 63 Flex Strip Note: The standard measurement tolerance on the drawings is ±0.05 mm/[0.002 ]. Tolerances which differ from this value will be indicated on the drawings. Height of stop dot is measured from the top surface of the flex strip Page 7 of 9
8 8. Electrical Configuration CS 63 Flex Strip CS 63 Clip Module / NOAHlink Adaptor #2 to CS 63 Flex Strip CS 63 Mini-DIN Cable to CS 63 Flex Strip Page 8 of 9
9 9. Product Specification Form Name Company Customer Part No. Parameters Look at Page Enter your choices Guidelines Model 2 CS 63 Clip Module NOAHlink Adaptor #2 CS 63 Mini-DIN Cable NOAHlink - CS 63 Cable Color coding CS 63 Clip Module Color Coding NOAHlink Adaptor #2 Color Coding CS 63 Mini-DIN Cable Color Coding NOAHlink - CS 63 Cable CS 63 Flex Strip 6 White, blue or red 6 White White, blue or red on Clip Module 6 Blue or red 7 Page 9 of 9
Socket Model CS 43/44/45
Socket Model CS 43/44/45 Page 1 of 21 Features Suitable for programming applications Reinforcement on back of sockets - only on parts with flexible terminals Socket Ø 2.55 mm [0.10 ] Ground terminal will
Switches Model PB 100
Switches Model PB 100 Page 1 of 9 Features Very small dimensions, Ø 1.9 mm [0.075 ] With or without flange Different plastic colors available Different lead wire lengths available Contents 1. History Revision
Switches Model SW 96
Switches Model SW 96 Page 1 of 13 Features Circular design Very small dimensions, Ø2.54 mm/[0.1 ] SW 96 with flanges Different plastic colors available Contents 1. History Revision 3 2. Mechanical Specifications
40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD
PCBeam Connector for 40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD Neoconix P/N: FBX0040CMFF6AU00 FEATURES High density 0.7424mm area-array pitch Low profile, 1.06mm mated height
Technical Data, 4-way High Voltage. Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Materials List
Technical Data, 4-way High Voltage APD 4-way connectors are the original DIN72585 (now ISO 15170) versions using a 2,5 mm contact system. Designed for automotive applications they also meet the requirements
The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
TILT SENSOR SWITCH. Item No. RBS100611T Description Ball-Contact Version 15 Page 1 of 7 Publish Date May 9, 2018
Page 1 of 7 Publish Date May 9, 2018 FUNCTION Rotation detection at 45 in vertical position APPLICATIONS 1 Rotation Detection for kinds of monitor/device 2 Toys / Entertainment devices FEATURES 1 Suitable
PCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: Host Socket Recommendations DATE: Updated June 12, 2006 (Initial release April 10, 2006) AFFECTED DOCUMENT: PCI Express Mini Card, Half-Mini Card ECR (Content of
RTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
38 MHz Passive Voltage Probe R&S RT-ZP1X
Manual 38 MHz Passive Voltage Probe R&S RT-ZP1X 1333.1370.02 Printed in Germany Test and Measurement 2 Manufacturer ROHDE & SCHWARZ For comprehensive information about Rohde and Schwarz, please visit our
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
FPC connectors (0.2mm pitch) Back lock
0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
VIBRATION SENSOR SWITCH
Item No RBS100612T Description Ball-Contact Version 13 Page 1 of 7 Publish Date May 13, 2018 FUNCTION Vibration detection in horizontal position APPLICATIONS 1 Wireless mouse 2 Anti-theft / Anti-tamper
NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES
NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
14CESeries. Miniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CESeries Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
1.1 Functional Description: NO Switch Functional Description: Illumination TECHNICAL DATA AND DIMENSIONAL DRAWINGS...
Product Manual PSE NO Switch CONTENTS CONTENTS... 1 1 PRODUCT DESCRIPTION... 3 1.1 Functional Description: NO Switch... 3 1.2 Functional Description: Illumination... 4 2 TECHNICAL DATA AND DIMENSIONAL
8 Series Pushbutton Switches
8 Series Pushbutton Switches Features. Contacts Silver or gold-plated contacts.. Epoxy resin case UL94V-0 self-extinguishing epoxy. 3. Actuator style Over 30 actuator variations. 4. Insulation between
0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
30,0 (1,181) 28,0 (1,102) 34,1 (1,343)
6,6 (0,65) 9,7 (0,8) 9,0±0, 0,5 ±0,008,6 (0,96) 0,6 (0,7) 6,6 (0,65) 6,6 (0,65),5 (0,78),85 (0,67) 8, (0,9) 9,7 (0,8) 9,7 (0,8),75 (0,8),85 (0,9),5 (0,78) 9,0±0, 0,5 ±0,008 9,0±0, 0,5 ±0,008 MEC-ROCKERMEC-7-08
Product Specification
MEC6 Series Socket, Vertical Orientation Other configurations available for: Right Angle Application See www.samtec.com for more information. Page 1 1.0 SCOPE 1.1 This specification covers performance,
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
onlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
CLINCHER FLEX CONNECTORS OVERVIEW TARGET MARKETS / APPLICATIONS FEATURES & BENEFITS
FLEX CONNECTORS CLINCHER Connector System for Flexible Circuitry (0.100in./ 2.54mm pitch) Maximum reliability; Low applied cost OVERVIEW The CLINCHER connector family includes single-row pin and receptacle
Mini PCI Express & msata Connector
09.Mar.2012 Rev. C Mini PCI Express & msata Connector 1 Scope: 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of MINI PCI
Product Specification
MEC8 Series Socket, Vertical Orientation Other configurations available for: Right Angle Application Edge Mount Application Press Fit Application See www.samtec.com for more information. 1.0 SCOPE 1.1
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
Features Sealed Construction for Automatic Soldering. Contact form. Operating Force SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO
B3W Features Sealed Construction for Automatic Soldering Available in two sizes: 6x6mm (1) and 12x12mm square (4) Ideal for applications such as audio, office and communications equipment, measuring instruments,
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-616 Revision: 1.1 Issue Date: OCT. 25, 2007 HAMBURG INDUSTRIES CO., LTD. 6FL., NO.12, Lane 270, SEC. 3, Pei Shen RD., Shen Keng Hsiang, Taipei Hsien, Taiwan
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
Mini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
PRODUCT SPECIFICATION
Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests
Switches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
PA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR 2.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) PAF Receptacle (IDC style) PA Shorouded header (Top entry type) PAF Receptacle (IDC style)
SPECIFICATION OF IC CARD ACCEPTOR. Model No.: ICA-610 Revision: 1.0 Issue Date: MAR. 09, 2006
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-610 Revision: 1.0 Issue Date: MAR. 09, 2006 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
Vandal-proof latching action switch MSM LA
Product Manual Vandal-proof latching action switch MSM LA CONTENTS 1 PRODUCT DESCRIPTION... 2 2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS... 2 2.1 Technical Data... 2 2.2 Dimensional Drawings... 5 2.3 Hole
Mini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
TM3DI16 module TM3-16 inputs
Characteristics module TM3-16 inputs Main Range of product Product or component type Range compatibility Jun 30, 2018 Modicon TM3 Discrete input module Modicon M241 Modicon M251 Modicon M221 Discrete input
Long seller backed by product variety and high reliability
Long seller backed by product variety and high reliability DS RELAYS RoHS compliant FEATURES 1. Breakthrough height of 9.8 mm.386 inch beats the 1 mm.394 inch limit 1c and 2c all have the same height (9.8
ERNIPRESS Trapezoidal-Connectors Series TMC
ERNIPRESS Trapezoidal-Connectors Series TMC Subminiatur-D Connectors to DIN 41 652/IEC 807-3 with Press-fit zone General Solderless press-in technology for connectors in bus systems permits rationalized
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
HMI Components. Series. Pushbutton Illuminated pushbutton. Audio and video mm mm mm
Edition 12/2014 HMI Components 95 Series Characteristics The Series 95 PCB pushbuttons can be used in combination with 1.5 to 2.5 mm PCBs. The buttons are selfattaching until they are soldered. Depending
HCMCONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications. Miniaturized Connectors, Compliant with the Automotive Performance Specifications
HCMCONNECTOR Board-to-wire/Wire-to-wire Features Miniaturized Connectors, Compliant with the Automotive Performance Specifications Boxed Female Terminal with Triple Over-stress Protection Mechanism Accept.
Necklace Microphone User Manual
Necklace Microphone User Manual Introduction The DPA d:screet Necklace Microphone is designed for use with wireless systems in environments like theater and television, and is especially well suited for
EcoFlex LED Neon Manual
Manual Part number: LN-ECO-XXXX-10m from Environmental Lights is one of the most flexible and cost-effective members of our line of LED Neon products. It allows you to achieve the creative potential of
NEW Series SSH Output to 75A, 510 Vac with Diagnostics High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models with system diagnostics Very low zero-cross turn-on voltage Input and output protection and control LED standard IP20 protection by flaps on terminals With double removable
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
Product Specification
MCX Jack, Straight Orientation, Through-hole MCX Plug, Straight Orientation, Through-hole Other configurations available for: Vertical and right angle cable-to-board applications Through-hole, surface
onlinecomponents.com
Short-Travel Switch MICON 5 SMT standard version SMT low version THT standard version Order no. Terminals Height [mm] Operating Force F1 [N] (+- 20% ) Switching Travel S2 [mm] (+- 0.15 mm) Operating life
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-703 Revision: 1.1 Issue Date: OCT. 25, 2007 HAMBURG INDUSTRIES CO., LTD. 6FL., NO.12, Lane 270, SEC. 3, Pei Shen RD., Shen Keng Hsiang, Taipei Hsien, Taiwan
APE A PE 2 F 2 M 10 Z. Subminiature Pushbutton Switches. Features. /Part Numbering. Page 253. Optional Accessories
Subminiature Pushbutton Switches RoHS RoHS Compliant 1. 2. 3. 4. 2.54mm 5. UL UL UL 0.4VA ACDC AC/DC60V 50mA AC/DC20mV 1A ULAC/DC48V 50mA 50m AC200V 1.5mA AC250V 1 500M DC500V 10,0000.4VA30,000 0.782.94N
OLU750P701N1A PSOV750701*(N)
Model Name Model Code PSOV750701A(N) PSOV750701B(N) Features : ㅡ Flickerless ㅡ Fullprotection provided: OCP/OVP/OTP/SCP/OLP ㅡ Low Power Dissipation (Standby mode :
Devices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
Product Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
PA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) Based upon wire-to-board crimp style PA connectors, the PA series family of connector have
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
Narrow pitch connectors (0.4mm pitch)
AXK7L, 8L For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4 Series 5.0mm 4.1mm 3. Improved mating strength between the socket and header The simple locking structures provided for the soldering
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
Port Unmanaged Ethernet Switch 10/100/1000 BASE-T With Series 805 Mighty Mouse Connector
10/100/1000 BASE-T With Series 805 Mighty Mouse Connector REV DESCRIPTION DATE APPROVED A Initial Release 8/11/2014 MF B Per DCN 52458 10/7/2014 RAS BF12U2-1671 THIS COPYRIGHTED DOCUMENT IS THE PROPERTY
AC-DC POWER SUPPLY UNIVERSAL INPUT, DESK TOP, WATTS MEDICAL APPLICATIONS MUI310-A Series
AC-DC POWER SUPPLY UNIVERSAL INPUT, DESK TOP, 230-310 WATTS MEDICAL APPLICATIONS MUI310-A Series 2MOPP Medical FEATURES Universal Input Range 4000Vac Input/Output Isolation 2 X MOPP Class l Protection
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
Slim Industrial Relay Type RSLM Electromechanical
Type RSLM Electromechanical RSLM Slim size (width 5mm) High breakdown voltage 4kV (between coil and contacts) Surge voltage up to 6kV (between coil and contacts) Conforms to VDE 0700, 0631 reinforced insulation
OSFP Connector Cage & Cable System
PAGE /6 /5/7 UNRESTRICTED OSFP Connector Cage & Cable System PAGE /6 /5/7 UNRESTRICTED.0 SCOPE This Product Specification covers performance, test and quality requirements for the JPC Quad Small Form Factor
CPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire Features Compact design.0mm pitch is realized miniaturization and low profile as the connector for automobile. Terminal construction Female terminal is designed for simple box
FOR CELLULAR PHONE; ULTRA LOW PROFILE TYPE FOR PORTABLE EQUIPMENT (0.5mm PITCH)
FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm PITCH) XR(3/5) SYSTEM CONNECTORS ULTR-LOW PROFILE TYPE (XR3) I/O CONNECTORS FOR PORTBLE EQUIPMENT (XR5) for portable equipment Receptacle
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
SYSTEM CONNECTORS FOR W-CDMA
SYSTEM CONNECTORS COMPLINT WITH EIJ RC-5238 (CONNECTOR FOR IMT-2000 MOBILE PHONES) SYSTEM CONNECTORS FOR W-CDM Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) Plug Signal 10
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
LED Driver Linear / area fixed output
Driver LC 2W 2/3/3/mA fixc lp SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 2, 3, 3 or ma Max. output power 2 W For luminaires of protection
SSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
SPRING-LOADED CONNECTORS PAD CONNECTORS
SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional
IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
LED Driver Linear / area fixed output
Driver LC W /3/3/7/mA fixc lp SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current, 3, 3, 7 or 1, ma Max. output power W For luminaires of
NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive FETURES 1. The product lineup consists of the low profile of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm, 8.0 mm, 11.5 mm, and 13.0 mm 14.0
Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
onlinecomponents.com
YF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock / Series New Low profile and space saving body of 1.0 mm high and mm deep (3.70 mm including the lever) and can have a minimum of four and two contacts
KM025B Series. Features. Application. 025 ( 0.64 mm ) / Standard. Rev. 002 (' ) 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터
Features 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터 3. 자동차의소형, 경량화요구에대응한제품 4. 세경전선에대응가능한 W/H 작업성구현 5. 신소재를적용하여외부온도및충격에의한제품파손을개선 Application 1. Switch Unit, Heater Control Unit, Cluster, AVN etc 차량용
RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
LED Driver Linear / area fixed output
Driver LC W 2/3/3/7/1mA fixc lp SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 2, 3, 3, 7 or 1, ma Max. output power W For luminaires
Indicator, round, raised, full face with plastic matt chrome bezel, 22.5 mm mounting, lamp block included. Yellow Green
22.5 mm 3.5 mm IP65 1 A 66 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales office. INDICATOR
Film Chip Capacitors. PPS DIELECTRIC CB Series GENERAL DESCRIPTION ADVANTAGES APPLICATIONS PERFORMANCE CHARACTERISTICS
APPLICATIONS General purpose function in low voltage applications: Filtering, coupling, decoupling Time-constant Oscillation timing circuit Typical applications would be: Automotive (navigation system...)
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE
POWER ROCKER SWITCH J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE FEATURES 1. Power switches with an electromagnetic reset function which meet the need for energy savings in equipment and for safety. Applications
TM3AI4 module TM3-4 analog inputs
Characteristics module TM3-4 analog inputs Main Range of product Product or component type Range compatibility Analogue input number 4 Analogue input type Complementary Analogue input resolution Permissible
Inverted Thru Board Card Edge: BTB
AVX has developed the 1-Piece bottom entry card edge connector to allow a perpendicular PCB to be mated to a top mounted main FR4 or metal core PCB from the bottom side. The most popular application on
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
NARROW PITCH (0.4mm) CONNECTORS P4 SERIES
Without soldering terminal With soldering terminal NARROW-PITH ONNTORS FOR BOARD-TO-BOARD AND BOARD-TO-FP ONNTION FATURS 1. 0.4 mm pitch and support for mated heights of up to 1.5 mm, 2.0 mm, 2.5 mm, 3.0
2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
AX SERIES XLR CABLE CONNECTORS
AX SERIES XLR CABLE CONNECTORS The revolutionary AX series of XLR connectors introduce an exciting contemporary look and feel to the professional audio interconnect market. They are designed to complement