MINI-BEAM DC Sensors with Blue Light Source

Transcription

1 MINI-BAM DC ensors with Blue Light ource For Web and Container Registration Mark ensing Applications 475 nm visible blue LD light source provides an economical solution to a large percentage of mainstream color mark applications Reliably senses many difficult color combinations, including yellow-against-white and pink-against-white Used to sense white labels on Kraft cardboard Minimum switch-point hysteresis to take full advantage of the blue LD configuration Includes Banner s exclusive AID alignment system 1 to 3V dc operation Bi-polar solid-state outputs (one sinking and one sourcing) tandard 1 millisecond output response;.3 millisecond models are available (see notes, page 3) Convergent, glass and plastic fiber-optic models available Choose integral cable or integral euro-style quick disconnect fitting; 9 m (3') cable and 15 mm (6") quick disconnect pigtail are available by special order U.. Patent Blue LD MINI-BAM Convergent Mode Visible blue, 475 nm Models Focus Cable Visible Blue 475 nm M312CVB M312CVBQD (.65") uro-style QD upply Voltage 1-3V dc Output Type Bipolar NPN/PNP 1 X C 1 G 1 A I N 1 1 mm. xcess Gain 1 mm. DITANC M312CVB Convergent Mode 1 mm 1 mm 1.2 mm..4 mm.4 mm. 1.2 mm Beam Pattern Performance based on 9% reflectance white test card M312CVB Convergent Mode 7.5 mm 15 mm 22.5 mm 3 mm.3 in.6 in.9 in 1.2 in DITANC 37.5 mm 1.5 in.45 in.3 in.15 in.15 in.3 in.45 in M312CV2B M312CV2BQD 49 mm (1.9") uro-style QD 1-3V dc Bipolar NPN/PNP 1 X C 1 G 1 A I N 1 1 mm. 1 mm. DITANC M312CV2B Convergent Mode 1 mm 1 mm 3. mm 2. mm 1. mm 1. mm 2. mm 3. mm M312CV2B Convergent Mode 25 mm 1 in 5 mm 2 in 75 mm 3 in DITANC 1 mm 125 mm 5 in.12 in.8 in...8 in.12 in! WARNING... Not To Be Used for Personnel Protection Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner afety Products catalog for safety products which meet OHA, ANI and IC standards for personnel protection. Printed in UA P/N 4929G9B

2 MINI-BAM ensors with Blue LD DC Models Blue LD MINI-BAM Glass Fiber Optic Visible blue, 475 nm Models Range Cable upply Voltage Output Type xcess Gain Beam Pattern Diffuse mode performance based on 9% reflectance white test card M312FVB M312FVBQD Range varies by sensing mode and fiber optics used uro-style QD 1-3V dc Bipolar NPN/PNP 1 X C 1 G 1 A I N 1.1 mm. BT13 Fiber 1 mm. DITANC M312FVB Diffuse Mode BT23 Fiber 1 mm. 1 mm 3. mm M312FVB.12 in Diffuse Mode 2. mm.8 in 1. mm. 1. mm BT13 BT mm.8 in 3. mm.12 in.3 in.6 in 24 mm.9 in DITANC 32 mm 1.2 in 4 mm 1.5 in Blue LD MINI-BAM Plastic Fiber Optic Visible blue, 475 nm Models Range Cable upply Voltage Output Type xcess Gain Beam Pattern Diffuse mode performance based on 9% reflectance white test card M312FPB M312FPBQD Range varies by sensing mode and fiber optics used uro-style QD 1-3V dc Bipolar NPN/PNP 1 X C 1 G 1 A I N 1.1 mm. 1 mm. DITANC M312FPB Diffuse Mode Plastic Fiber 1 mm. PBT46U Fiber 1 mm 3. mm 2. mm 1. mm 1. mm 2. mm 3. mm M312FPB Diffuse Mode 4 mm.15 in PBT46U.3 in 12 mm.45 in DITANC.6 in 2 mm.75 in.12 in.8 in...8 in.12 in For MINI-BAM Blue LD ensors: i) 9 m (3') cables are available by adding suffix W/3 to the model number of any cabled sensor (e.g., M312FVB W/3) ii) tandard models have 1 millisecond output response, models with.3 millisecond (3 microsecond) response are available by adding suffix MH to the model number (e.g., M312FVBMH). Note that this modification reduces the maximum operating temperature to +5ºC (122ºF), and reduces sensing range (and excess gain). iii) A 15 mm (6") long pigtail cable with attached QD connector is available by adding suffix QDP to the model number (e.g., M312FVBQDP). iv) A model with a QD connector requires an optional mating cable (see accessories, page 6). page 2 Banner ngineering Corp. Minneapolis, U..A.

3 MINI-BAM ensors with Blue LD DC Models Blue LD MINI-BAM DC pecifications upply Voltage and Current upply Protection Circuitry Output Configuration Output Rating Output Protection Circuitry Output Response Time Repeatability Adjustments Indicators Construction nvironmental Rating 1 to 3V dc (1% maximum ripple) at less than 25 ma (exclusive of load) Protected against reverse polarity and transient voltages Bipolar: One current sourcing (PNP) and one current sinking (NPN) open-collector transistor 15mA maximum each output at 25 C, derated to 1mA at 7 C (derate 1mA per C) Off-state leakage current less than 1 microamp Output saturation voltage (PNP output) less than 1 volt at 1mA and less than 2 volts at 15mA Output saturation voltage (NPN output) less than 2 millivolts at 1mA and less than 1 volt at 15mA Protected against false pulse on power-up and continuous overload or short-circuit of outputs ensors will respond to either a "light" or a "dark" signal of 1 millisecond or longer duration, 5Hz max..3 millisecond response modification is available. ee note on page 1. (NOT: 1 millisecond delay on power-up: outputs do not conduct during this time.).3 milliseconds. Response time and repeatability specifications are independent of signal strength. Light/Dark Operate select switch, and 15-turn slotted brass screw Gain (sensitivity) adjustment potentiometer (clutched at both ends of travel). Both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover. xclusive, patented Alignment Indicating Device system (AID, U patent # ) lights a rear-panel mounted red LD indicator whenever the sensor sees a "light" condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate). Reinforced thermoplastic polyester housing, totally encapsulated, o-ring sealing, acrylic lenses, and stainless steel screws. Meets NMA standards 1, 2, 3, 3, 4, 4X, 12, and 13; IC IP66 Connections Certifications PVC-jacketed 4-conductor or 9 m (3') cables, or 4-pin uro-style quick disconnect (QD) fitting are available. QD cables are ordered separately. ee page 6. Operating Conditions Temperature: -2 to +7 C (-4 to +158 F) Maximum relative humidity: 9% at 5 C (non-condensing) Application Notes The NPN (current sinking) output of dc MINI-BAM sensors is directly compatible as an input to Banner logic modules, including all non-amplified MAXI-AMP and MICRO-AMP modules. MINI-BAMs are TTL compatible. 15 Turn Gain Adjustment and Light/Dark Operate witch* *Note: Turn Light/Dark Operate switch fully clockwise to the end stop for light-operated output and fully counter-clockwise to the end stop for dark-operated output. Gasketed Acrylic Cover AID Indicator LD Lights when the sensor sees its own modulated light and pulses at a rate proportional to the strength of the received light signal. Figure 1. MINI-BAM DC ensor features Banner ngineering Corp. Minneapolis, U..A. page 3

4 MINI-BAM ensors with Blue LD DC Models Blue LD MINI-BAM DC ensor Hookups ensors with Attached Cable ensors with Quick Disconnect ( uro-tyle) bn bu wh bk Load Load + 1-3V dc bn bu wh bk Load Load + 1-3V dc mitters with Attached Cable mitters with Quick Disconnect ( uro-tyle) bn bu + 1-3V dc bn bu wh bk + 1-3V dc Blue LD MINI-BAM DC ensor Dimensions MINI-BAM DC ensor - Convergent (model suffix CVB) Cabled Models Quick-Disconnect Models 3.7 mm (1.21") 24.1 mm (.95") Cable Mounting Peg (ø 6.3 mm x 2.5 mm) 19.1 mm (.75") 3.2 mm (.13") 12.2 mm (.48") ø 3 mm Clearance (2) M18 x 1 x 15 mm Thread (Mounting Nut upplied) M12 x 1 Thread Quick-disconnect 53.3 mm (2.1") 27.4 mm (1.8") 18.5 mm (.73") MINI-BAM DC ensor - Glass Fiber Optic (model suffix FVB) MINI-BAM DC ensor - Plastic Fiber Optic (model suffix FPB) Fiber Optic Fitting Fiber Optic Fitting 57.5 mm (2.27") 31.2 mm (1.23") 42.1 mm (1.66") 16.2 mm (.64") page 4 Banner ngineering Corp. Minneapolis, U..A.

5 MINI-BAM ensors with Blue LD DC Models Accessories MINI-BAM Modifications Model uffix Modification Description xample of Model Number W/3 9 m (3') cable All MINI-BAM sensors may be ordered with an integral 9 m (3') cable in place of the standard cable. M312CVB W/3 MH Modified for High peed tandard dc MINI-BAM sensors with 1 millisecond output response may be modified for.3 millisecond (3 µs) response. NOT: Faster response comes at the expense of lower excess gain. Also, operating temperature range becomes -2º to +5ºC (-4º to +122ºF). M312CVBMH QDP Pigtail Quick- Disconnect All MINI-BAMs may be built with a 15 mm (6") long integral cable, which is terminated with the appropriate QD connector. ee the Accessories section for more information. M312CVBQDP xtension Cables (without connectors) The following cables are available for extending the length of existing sensor cable. These are 3 m (1') lengths of MINI-BAM cable. This cable may be spliced to existing cable. Connectors, if used, must be user-supplied. Model Type Used with: C conductor All MINI-BAM M312 dc models Quick-Disconnect Cables The following cables are available for MINI-BAM DC eries QD models tyle Model Length Dimensions Pin-out uro-style traight MQDC-46 MQDC-415 MQDC-43 5 m (15') 9 m (3') M12 x 1 3 max. (1.5") ø 15 mm (.6") 44 mm max. (1.7") White Wire Brown Wire Black Wire Blue Wire uro-style Right-angle MQDC-46RA MQDC-415RA MQDC-43RA 5 m (15') 9 m (3') 3 max. (1.5") M12 x 1 ø 15 mm (.6") Banner ngineering Corp. Minneapolis, U..A. page 5

6 MINI-BAM ensors with Blue LD DC Models Replacement Lens Assemblies MINI-BAM lens assemblies are field-replaceable. Model Description UC-3C.7 UC-3C2 UC-3F UC-3FP Replacement lens for CVB Replacement lens for CV2B Replacement lens for FVB Replacement lens for FPB MINI-BAM Mounting Brackets MB312 tainless steel 2-axis, side-mount bracket MB312B tainless steel 2-axis, bottom mounting bracket Includes mounting foot 4.3 mm lot (2) (.17") R 5.1 mm (.2") R 24.1 mm (.95") 1 (2) 1 (2) 24.1 mm (.95") 9.1 mm (.36") 2.5 mm (.1") 2 ø 3.5 mm (.12") mm (1.79") 15 (2) C L 31. (1.25") ø 3.5 mm lot (.12") 2.1 mm (.79") R 3.1 mm (.12") (2) 2.3 mm (.8") 1 (TYP) 4.32 mm (.17") lot (2) 3.1 mm lot (2) (.12") 17.3 mm (2) (.68") 35. mm (2) (1.38") 5. (2.") 8. (2) (.34") ø 6.9 mm (.27") 23.4 mm (.92") 11.4 mm (.45") mm (.1") MB312PD tainless steel 1 barrel mounting bracket Not for use with plastic fiber optic models MB46L L bracket 14 ga 316 stainless steel R 5.1 mm (.2") 2 R 24.1 mm (.95") 15 (2) C L 31. (1.25") (.2") (.2") 5 mm (.2") (2x) (.3") CL (.6") 15 mm (.6") ø 3 (1.4") ø 6.5 mm (.26") (6x) ø 4. (.18") 2.5 mm (.1") 9 ø 4. lot (.18 in) 4. (1.6") 15.2 mm (.6") R 3.1 mm (.12") (2) 65 mm (2.6") 45.5 mm (1.79") mm (.725") 54 mm (2.1") 2 mm (.1") 27 mm (1.1") page 6 Banner ngineering Corp. Minneapolis, U..A.

7 MINI-BAM ensors with Blue LD DC Models MINI-BAM Mounting Brackets MB46 bracket 14 ga 316 stainless steel MB46U U bracket 14 ga 316 stainless steel 1 mm (.4") (.2") (.2") 5 mm (.2") (4x) (.3") CL 34 mm (1.3") (.6") 17 mm (.7") 15 mm (.6") 3.5 mm (.14") ø 3 (1.4") ø 6.5 mm (.26") (6x) 13 mm (.5") (.2") (.2") 5 mm (.2") (4x) 17 mm (.7") 34 mm (1.3") C L (.3") (.6") 15 mm (.6") 3.5 mm (.14") ø 3 (1.4") ø 6.5 mm (.26") (6x) (.6") 65 mm (2.6") 65 mm (2.6") 54 mm (2.1") 2 mm (.1") 27 mm (1.1") (.6") 54 mm (2.1") 2 mm (.1") 27 mm (1.1") 7 mm (2.8") MB18C 1 split clamp black reinforced PBT tainless steel mounting hardware included Not for use with plastic fiber optic models MB18F 1 swivel, black reinforced PBT tainless steel mounting hardware included Not for use with plastic fiber optic models 42.4 mm (1.67") 14. mm (.55") 4. mm (1.6") 3. mm (1.18") 21.1 mm (.83") 2.5 mm (.1") Nut Plate 13 mm (.5") M5 x.8 x crew (2) M18 x 1 internal thread 42. mm (1.65") 36. mm (1.42") 5. (2.") 1. (.42") 22.9 mm (.9") 25.4 mm (1.") MB318C 1 swivel barrel or side mount Black PBT thermoplastic polyester MB318U ide-mount swivel bracket extended range of motion Black PBT thermoplastic polyester M18 x 1 internal thread 5. (2.") 66.5 mm (2.62") 56.7 mm (2.31") Assembled 5. (2.") 66.5 mm (2.62") 56.7 mm (2.31") Assembled 68. mm (2.68") 29. mm (1.14") 68. mm (2.68") 2 x Hole for #6 Machine crew 29. mm (1.14") Banner ngineering Corp. Minneapolis, U..A. page 7

8 MINI-BAM ensors with Blue LD DC Models MINI-BAM Mounting Brackets MB3K Flat-mount swivel bracket with extended range of motion Black reinforced PBT and 316 stainless steel MB18UR Universal rotating bracket, 1 or 3 mm 3 series stainless steel 66. mm (2.6") 27.2 mm (1.7") 16. mm (.63 ") MB18UR Top ø18.3 mm (.72") 45.2 mm (1.78") ø2.3 mm (.8") ø3.5 mm (1.2") 5. (2.") 6º 2.7 mm (.1") 6º 2. (.82") 41.7 mm (1.64") R2.5 mm (.1") 24. (.97") 5. (2.") 66.5 mm (2.62") 56.7 mm (2.31") Assembled 78. mm (3.7") 25.4 mm (1.") 46.7 mm (1.84") 9.7 mm (.38") 4X 6.9 mm (.27") 2.3 mm (.8") MB18UR Bottom 41.7 mm (1.64") 2. (.82") 8.1 mm 2.3 mm (.32") 25.4 mm (.8") (1.") 33. ø 3.5 mm (1.33") (1.2") 6X #1-32 Thru 6º 63.5 mm (2.5") 68. mm (2.68") 29. mm (1.14") 71.1 mm (2.8") 2.7 mm (.1") WARRANTY: Banner ngineering Corp. warrants its products to be free from defects for one year. Banner ngineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. Banner ngineering Corp., 9714 Tenth Ave. No., Minneapolis, MN Phone: mail: sensors@baneng.com