Data Sheet. Prerequisites For Using the IPC Library. Library Features: IPC-SM Library. IPC-SM Standard. Library Organisation

Electronic Component Zero Orientation For CAD Library Construction

Electronic Zero Orientation For CAD Library Construction 3000 Lakside Drive Suite 309S Bannockburn, IL, 60015 Tel: 847-615-7100 Fax: 847-615-7105 www.ipc.org PCB Libraries, Inc. 701 Lee Street Des Plaines,

Package Naming Conventions

1 Norlinvest Ltd, BVI. is a trade name of Norlinvest Ltd. All Rights Reserved. No part of the Package Naming Conventions document can be reproduced in any form or by any means without the prior written

Package (1C) Young Won Lim 3/20/13

Copyright (c) 2011-2013 Young W. Lim. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published

Package (1C) Young Won Lim 3/13/13

Copyright (c) 2011-2013 Young W. Lim. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published

IDF-TO-3D User Guide

Contents: 1. Supported Platforms 2. Creating a working session 3. Loading IDF files to your working session 4. Viewing Options 5. Zooming to a section of your PCB 6. 3D PCB Library Content 7. 3D PCB Libraries

DipTrace SCHEMATICAND PCBDESIGNSOFTWARE. PaternNamesHelp

DipTrace SCHEMATICAND PCBDESIGNSOFTWARE PaternNamesHelp 70 How to use?! Pattern name carries information about pattern type and number of various parameters like pitch, width, number of pads e.t.c., divided

Introduction Overview Of Intel Packaging Technology

1 1.1 Overview Of Intel Packaging Technology As semiconductor devices become significantly more comple, electronics designers are challenged to fully harness their computing power. Transistor count in

Using the PCB Component Wizard

Published on Online Documentation for Altium Products (https://www.altium.com/documentation) Home > PCB Component Wizard Using Altium Documentation Modified by Phil Loughhead on Jun 19, 2017 The PCB Component

Selecting Sockets. Introduction. Mechanical Considerations for J-Lead Sockets. for Altera Devices

Selecting Sockets for Altera Devices January 1998, ver. 2 Application Note 80 Introduction Altera offers a number of surface-mount packages. Surface-mount assembly places unique demands on the development

PCB Components Library Management with Altium Designer

PCB Components Library Management with Altium Designer By Kelvyn Shaw Altium designer has the ability to connect and use information from an external database. Detailed component information can now be

Chapter 1 Introduction of Electronic Packaging

Chapter 1 Introduction of Electronic Packaging 1 Introduction of Electronic Packaging 2 Why Need Package? IC Foundry Packaging house Module Sub-system Product 3 Concept of Electric Packaging 4 Moore s

IC Obsolescence Solutions

Company Overview March 12, 2015 Tuesday, October 03, 2017 IC FOOTPRINT CONVERSION ADAPTERS REPLACE OBSOLETE ICs WITHOUT RE-SPINNING YOUR PCB An IC Adapter is a small PCB designed that: Has a circuit and

Adapter Technologies

Adapter Technologies Toll Free: (800) 404-0204 U.S. Only Tel: (952) 229-8200 Fax: (952) 229-8201 email: info@ironwoodelectronics.com Introduction Company Overview Over 5,000 products High Performance Adapters

Over 5,000 products High Performance Adapters and Sockets Many Custom Designs Engineering Electrical and Mechanical ISO9001:2008 Registration

Overview Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs Engineering Electrical and Mechanical ISO9001:2008 Registration Adapter Technology Overview Pluggable

Packaging Solutions. Advanced Packaging Solutions for High-Density PLDs

Packaging Solutions Advanced Packaging Solutions for High-Density PLDs June 1998 package options pin compatibility design flexibility Advanced Packaging Solutions FineLine BGA vertical migration space

M68HC705L4 PROGRAMMER BOARD APPLICATION NOTE

M68HC705L4PGMR JUNE 1992 M68HC705L4 PROGRAMMER BOARD (REVision A PWBs only) APPLICATION NOTE INTRODUCTION This application note describes the programming technique used to program and verify the XC68HC705L4

This presentation will..

Component Identification: Digital Introduction to Logic Gates and Integrated Circuits Digital Electronics 2014 This presentation will.. Introduce transistors, logic gates, integrated circuits (ICs), and

ECE 477 Digital Systems Senior Design Project. Module 7 Real-World Design Constraints and Product Packaging Considerations

2011 by D. G. Meyer ECE 477 Digital Systems Senior Design Project Module 7 Real-World Design Constraints and Product Packaging Considerations 1 Reference: IEEE Spectrum,, January 2003 Instructional Objectives:

Higher Advanced Electronics Troubleshooting And Repair Course. Topics Covered

Higher Advanced Electronics Troubleshooting And Repair Course DAY 1 Topics Covered 9.00am -9.30am 9.30am- 10.45am Refresh Of Advanced Electronics Troubleshooting and Repair Course 1) How to remove, align

25 mil Pitch, IEEE 1284 Termination Thin Film Surface Mount Resistor, Capacitor, Diode

End of Life Dec-2017 VSSX1284 25 mil Pitch, IEEE 1284 Termination Thin Film Surface Mount Resistor, Capacitor, Diode Product is pictured larger than actual size to show detail Vishay has upgraded the standard

A Comparison Of Automatic Optical Inspection Systems For Use With Lead-Free Surface Mount Assemblies

A Comparison Of Automatic Optical Inspection Systems For Use With Lead-Free Surface Mount Assemblies M Wickham & C Hunt July 2002 July 2002 A Comparison Of Automatic Optical Inspection Systems For Use

Figure 1. Device Package Ordering Information for Stratix, Stratix GX, Cyclone, APEX 20KC, APEX II, Mercury & Excalibur Devices EP1S 25 F 780 C 5 N

April 2003, ver. 15 Altera Devices Figures 1 and 2 explain the ordering codes for Altera devices. Devices that have multiple pin counts for the same package include the pin count in their ordering codes.

1. Table of contents History Tools Parts manipulation Soldering Soldering iron or station...

1. TABLE OF CONTENTS 1. Table of contents... 3 2. History... 15 3. Tools... 19 3.1. Parts manipulation... 19 4. Soldering... 23 4.1. Soldering iron or station... 23 4.2. Hot-air rework stations... 24 4.3.

Published on Online Documentation for Altium Products (

Published on Online Documentation for Altium Products (https://www.altium.com/documentation) Home > Creating the PCB Footprint Using Altium Documentation Modified by Annika Krilov on Apr 11, 2017 Concept

Intro to Logic Gates & Datasheets. Intro to Logic Gates & Datasheets. Introduction to Integrated Circuits. TTL Vs. CMOS Logic

Intro to Logic Gates & Datasheets Digital Electronics Intro to Logic Gates & Datasheets This presentation will Introduce integrated circuits (ICs). Present an overview of : Transistor-Transistor Logic

Intro to Logic Gates & Datasheets. Digital Electronics

Intro to Logic Gates & Datasheets Digital Electronics Intro to Logic Gates & Datasheets This presentation will Introduce integrated circuits (ICs). Present an overview of : Transistor-Transistor Logic

IPC-D-859. Design Standard for Thick Film Multilayer Hybrid Circuits ANSI/IPC-D-859. The Institute for. Interconnecting

The Institute for Interconnecting and Packaging Electronic Circuits Design Standard for Thick Film Multilayer Hybrid Circuits ANSI/ Original Publication December 1989 A standard developed by the Institute

in-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC

Hi-End Hi-features rich 3-in-1 SMT/PTH Rework System Model MFRS-500SUSB reliable & caring since 1976 in-built Vacuum Pick-up for large SMD ICs RS232 to USB interface for direct connection to PC LEAD RoHS

ANC-8000 / ANC-9000 LCC/PGA/PCC/QFP to Wire Wrap Adapter Series. Antona Corporation, Los Angeles, Ca.

Rev. H $ 5.00 ANC-8000 / ANC-9000 LCC/PGA/PCC/QFP to Wire Wrap Adapter Series Antona Corporation, Los Angeles, Ca. 1643 1/2 Westwood Blvd., L.A., CA. 90024-5603 Tel:(310) 473-8995 ***** BEFORE INSTALLING

Scope adapters and probes. Surface mount QFP Logic Analyzer adapters

Logic Analyzer Adapters Logic Analyzer and scope adapters are designed to give access to each signal pin on a high-density IC. Some variations are specifically adapted to connect to a specific logic analyzer

Maxim Integrated Products 1

19-2881; Rev 0; 6/03 General Description The MAX1543 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that provides the voltages and features required for active-matrix,

Additional Slides for Lecture 17. EE 271 Lecture 17

Additional Slides for Lecture 17 Advantages/Disadvantages of Wire Bonding Pros Cost: cheapest packages use wire bonding Allows ready access to front side of die for probing Cons Relatively high inductance

Bill of Materials D RF INTERFACE CCA G. Assembly No.: Description: Revision:

D161020 RF INTERFACE CCA Designator Item Part Number Qty UOM Description Engineering Description TB2-TB5 19B1547-002 4 EA CONNECTOR, HEADER 2P PC HEADER J4 19B1547-003 1 EA CONNECTOR, HEADER 3P PC HEADER

Products, Services & Capabilities

Products, Services & Capabilities Toll Free: (800) 404-0204 U.S. Only Tel: (952) 229-8200 Fax: (952) 229-8201 email: info@ironwoodelectronics.com Overview Company Overview Founded 1986 Over 5,000 products

Library User Guide PADS VX. ODA_Starter_Library. Rev 1a

LEARN MORE * * EXPEDI TED DELI VERY LEARN MORE LEARN MORE CALL9254012004 EMAI Lsal es@opt i mumdesi gn. com Library User Guide PADS VX ODA_Starter_Library Rev 1a Page 1 Contents List of Figures 4 Introduction

FUJITSU SEMICONDUCTOR. For further information please contact:

FUJITSU SEMICONDUCTOR LIMITED Nomura Fudosan Shin-yokohama Bldg. 10-23, Shin-yokohama 2-Chome, Kohoku-ku okohama Kanagawa 222-0033, Japan Tel: +81-45-415-5858 http://jp.fujitsu.com/fsl/en/ IC For further

Solder Reflow Guide for Surface Mount Devices

April 2008 Introduction Technical Note TN1076 This technical note provides general guidelines for a solder reflow and rework process for Lattice surface mount products. The data used in this document is

Socket Technologies

Socket Technologies Toll Free: (800) 404-0204 U.S. Only Tel: (952) 229-8200 Fax: (952) 229-8201 email: info@ironwoodelectronics.com Introduction Company Overview Over 5,000 products High Performance Adapters

Epigap FAQs Part packges and form factors typical LED packages

3. packges and form factors 3.1. typical LED packages Radiation from LEDs is generated by a semiconductor chip mounted in a package. LEDs are available in a variety of designs significantly influencing

BGA Variable Pitch and Array Board

BGA Variable Pitch and Array Board Mix and match components to configure your custom kit. Practical Components is now offering a one-of-a-kind BGA Variable Pitch and Array PC Board. Each board contains

DC6688F-EVK Manual. Dragonchip. Document Revision 1.3 January, DC6688F-EVK Manual Rev1.3. Dragonchip. 1 of 14. DragonFLASH

DC6688F-EVK Manual Document Revision 1.3 January, 2013 1 of 14 Contents 1 INTRODUCTION... 3 2 JUMPER SETTING... 6 3 IC PLACEMENT... 7 4 SL PROGRAMMING... 9 5 SCHEMATICS... 10 REVISION HISTORY... 13 2 of

geda/gaf Symbol Creation Document

geda/gaf Symbol Creation Document Ales V. Hvezda, ahvezda@geda.seul.org This document is released under GFDL (http://www.gnu.org/copyleft/fdl.html) July 6th, 2004 1 Contents 1 Overview 3 2 Component symbol

Module 7 Electronics Systems Packaging

Module 7 Electronics Systems Packaging Component Assembly, materials for assembly and joining methods in electronics -Surface Mount technology- design, fabrication and assembly; -failures library; -materials

Altium Designer 6.6 Release Notes

Altium Designer 6.6 Release Notes Build 6.6.7903 PCB When drawing tracks in masked state, their net names remained distractingly bright. Net names are now dimmed consistently with their masked tracks.

Maxim Integrated Products 1

19-5229; Rev 0; 4/10 MAX14885E Evaluation Kit General Description The MAX14885E evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that utilizes the MAX14885E device to implement

Socket Technologies

Socket Technologies Introduction Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs Engineering Electrical and Mechanical ISO9001:2008 Registration Socket Technology

Solder Reflow Guide for Surface Mount Devices Technical Note

Solder Reflow Guide for Surface Mount Devices FPGA-TN-02041 Version 3.8 November 2017 Contents Acronyms in This Document... 3 1. Introduction... 4 2. Reflow... 4 3. Inspection... 4 4. Cleaning Recommendations...

Usable gates 600 1,250 2,500 5,000 10,000 Macrocells Logic array blocks Maximum user I/O

MAX 3000A Programmable Logic Device Family June 2006, ver. 3.5 Data Sheet Features... High performance, low cost CMOS EEPROM based programmable logic devices (PLDs) built on a MAX architecture (see Table

Pogo Pin / Spring Probe. Custom Configurations. Test & Burn-in (ZIF) SOCKET SOLUTIONS. Up to 40 GHz. Prototyping. Production.

, PROTOTYPING How to Choose The Right Socket Finding the right socket for your project is easy. Gathering the following key characteristics will assist you in finding the correct ET part number: 1. Pin

IR TRANSMITTER BLOK PCB ASSEMBLY INSTRUCTIONS. Copyright EduTek Ltd Rev. 2

IR TRANSMITTER BLOK PCB ASSEMBLY INSTRUCTIONS Copyright EduTek Ltd Rev. 2 Circuit Details The circuit is shown below with a parts list of components. Check through this list and identify each component.

ABI Electronics. Test and measurement equipment for the maintenance and repair of electronics.

Test and measurement equipment for the maintenance and repair of electronics >Speed up processes with interactive test sequences >Reduce operator errors with automatic instrument setup >Detect fault conditions

+Denotes lead-free and RoHS compliant.

19-2446; Rev 1; 6/08 MAX17062 Evaluation Kit General Description The MAX17062 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages required for active-matrix,

Printed Circuits Board (PCB) Design. ELC 4438: Embedded Systems Design Spring 2016

Printed Circuits Board (PCB) Design ELC 4438: Embedded Systems Design Spring 2016 What is a PCB? A Mechanical Solution to an Electrical Problem Photo from hephaestusaudio.com Photo from www.sparkfun.com

Integrated Circuits. Package Information. Tape and Reel Information A separate 'Tape and Reel' document is also available from the CML website

Integrated ircuits ackage Information ape and Reel Information separate 'ape and Reel' document is also available from the M website ublication No: //astardly/publications/gs/acks.indd - Issue 20 - March

Technical Note. Design Considerations when using NOR Flash on PCBs. Introduction and Definitions

Technical Note Design Considerations when using NOR Flash on PCBs Introduction and Definitions TN-13-30: NOR Flash Memory: PCB Design Considerations Introduction and Definitions Table 1: Definitions Term

GL116 ENCODER/DECODER MANUAL GLOLAB CORPORATION

GL ENCODER/DECODER MANUAL GLOLAB CORPORATION Thank you for buying our GL Encoder / Decoder Module. This device was developed in response to many requests for an encoder and decoder that would serialize

Altera Programming Hardware

Altera Programming Hardware June 1996, er. 3 Data Sheet General Description Altera offers a ariety of hardware to program and configure Altera deices. For conentional deice programming, in-system programming,

Semiconductor June 1992

FEDL96-3 FEDL96-3 Semiconductor June 992 MSM96-, -2 LCD Driver with Keyscan Function This version: MSM96-, Sep. 2 Previous version: Nov. 997-2 GENERAL DESCRIPTION The MSM96- is an LCD driver for a /3 duty

Burn-in & Test Socket Workshop

Burn-in & Test Socket Workshop IEEE March 4-7, 2001 Hilton Mesa Pavilion Hotel Mesa, Arizona IEEE COMPUTER SOCIETY Sponsored By The IEEE Computer Society Test Technology Technical Council COPYRIGHT NOTICE

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. MINIGRABBER TEST CLIP WITH BANANA JACK Banana Jack built into plunger. RATING:

TEST / PRODUCTION SOCKETS & ADAPTERS for BGA LGA QFN QFP SOIC PLCC LCC PGA Flat Pack and others

PRODUCT PORTFOLIO 2 TEST / PRODUCTION SOCKETS & ADAPTERS for BGA LGA QFN QFP SOIC PLCC LCC PGA Flat Pack and others ScrewLock Type (Gullwing Package example) Moulded SpringLock Type (LGA Package example)

Company Profile Welcome

Company Profile Welcome cte4986@ms15.hinet.net Chih Ting Electronics Co., Ltd 1 Company Profile CHIH TING ELECTRONICS CO., LTD. CUSTOMERS TRUST ENSURED FOR BEST QUALITY & SERVICES cte4986@ms15.hinet.net

Quad GTL/GTL+ to LVTTL/TTL bidirectional non-latched translator

Quad GTL/GTL+ to LVTTL/TTL bidirectional non-latched translator Rev. 07 3 February 2009 Product data sheet 1. General description The is a quad translating transceiver designed for 3.3 V system interface

DELUXE STEREO AMPLIFIER KIT

ESSENTIAL INFORMATION BUILD INSTRUCTIONS CHECKING YOUR PCB & FAULT-FINDING MECHANICAL DETAILS HOW THE KIT WORKS CREATE YOUR OWN SPEAKER DOCK WITH THIS DELUXE STEREO AMPLIFIER KIT Version 2.0 Build Instructions

MAX17116Q Evaluation Kit Evaluates: MAX17116 in a 24-Pin TQFN Package

19-5846; Rev 0; 5/11 MAX17116Q Evaluation Kit General Description The MAX17116Q evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that evaluates the MAX17116 dual-output DC/DC power

MAX5097A Evaluation Kit. Evaluates: MAX5097A

19-0718; Rev 0; 1/07 MAX5097A Evaluation Kit General Description The MAX5097A evaluation kit (EV kit) demonstrates the MAX5097A in a standard application circuit demonstrating high efficiency. The EV kit

User Guide. Version /7/05

PCB Libraries IPC-7351 LP Suite User Guide Version 2.500-3/7/05 CONTENTS SECTION PAGE 1 INTRODUCTION...1-1 1.1 Basic Features...1-1 2 INSTALLATION...2-2 2.1.net Framework...2-2 2.2 Large and Small Fonts...2-3

Power Matters. Antifuse Product Information Brochure

Power atters. Antifuse Product Information Brochure Providing industry-leading FPGAs and SoCs for applications where security is vital, reliability is non-negotiable and power matters. 2 www.microsemi.com/fpga-soc

R e v. I - 4, N o v e m b e r 2 7,

K2 OWNER S MANUAL ERRATA R e v. I - 4, N o v e m b e r 2 7, 2 0 1 5 M A K E T H E S E C H A N G E S T O Y O U R R E V. I M A N U A L B E F O R E Y O U B E G I N A S S E M B L Y 1. Page 20, Right Column,

AC342 Application Note CQFP to CLGA Adapter Socket

AC342 Application Note CQFP to CLGA Adapter Socket Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales:

Guide To Making Schematic Components For ExpressSCH

Guide To Making Schematic Components For ExpressSCH The ExpressSCH program includes hundreds of components and symbols that you can use to draw your schematics. However, sometimes we may not have all of

EV1531DQ-002A Low Power, Triple Output Step-Up Plus Charge Pump for TFT Bias

Monolithic Power Systems EV1531DQ-002A Low Power, Triple Output Step-Up Plus Charge Pump for TFT Bias GENERAL DESCRIPTION The EV1531DQ-002A Evaluation Board is designed to demonstrate the capabilities

AP3156 Evaluation Module

Features V IN Range: 2.7V to 5.5V Fully Programmable Current with Single Wire - 32-Step Logarithmic Scale - 20/25mA Max Current per Channel - Four Low Current Settings Down to 50μA - Low IQ (50μA) for

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED

RKP08 Component List and Instructions

RKP08 Component List and Instructions PCB layout Constructed PCB RKP08 Scematic RKP08 Project PCB Page 1 Description The RKP08 project PCB has been designed to use PIC microcontrollers such as the Genie

Electronics Online Challenge 2018 Linksys WRT54G 2.4GHz Wireless Broadband Router

Electronics Online Challenge 2018 Linksys WRT54G 2.4GHz Wireless Broadband Router Team Number #986A Team Name: Lancers School: Grace Brethren Schools Contributors: Chandler Nelson, 10th Grade Joshua Austria,

The IP4790CZ38 can be used with a range of DisplayPort devices including: Personal computer PC monitor Notebook

Rev. 01 14 July 2008 Product data sheet 1. General description 2. Features 3. Applications 4. Ordering information The is a single chip ElectroStatic Discharge (ESD) protection solution for the DisplayPort

SameFrame Pin-Out Design for FineLine BGA Packages

SameFrame Pin-Out Design for Packages June 1999, er. 1 Application Note 90 Introduction A key adantage of designing with programmable logic is the flexibility which allows designers to quickly modify or

Construction of an electrical model of a TQFP100 package with IC-EMC

Construction of an electrical model of a TQFP100 package with IC-EMC A. Boyer INSA-GEI, 135 Av de Rangueil 31077 Toulouse France Contact : alexandre.boyer@insa-toulouse.fr web site : www.ic-emc.org Abstract:

The primary side feedback single-stage

The primary side feedback single-stage active PFC constant current LED driver D8063-18-30W Panel light Application Note May, 3 rd. 2016 Feature Single-stage active high power factor correction, high PF

PICAXE EXPERIMENTER BOARD (AXE090)

(AXE00) Description: The PICAXE experimenter board allows circuits for any size/revision of PICAXE chip ( / / ) to be quickly tested using a prototyping breadboard. The experimenter board provides power

ZLED7030KIT-D1 Demo Kit Description

ZLED7030KIT-D Demo Kit Description Kit Important Notice Restrictions in Use IDT s ZLED7030KIT-D Demo Kit hardware is designed for ZLED7030 demonstration, evaluation, laboratory setup, and module development

A0021. Overview. Features. Ordering Information. HSS Touch Signature IC 6 Input - I 2 C. Part Number Format: A X Y Z

VSS NC NC VDD SDA SENSOR 2 SENSOR 1 ADD1 HSS Touch Signature IC 6 Input - I 2 C A0021 Overview The patented AlSentis A0021 Touch IC is a complete 1 6 input touch sensing solution. It includes all signal

Uzebox Kit Assembly Guide

Uzebox Kit Assembly Guide V1.3 Page 1 of 18 Revision History Version Date Author Description 1.0 01-Nov-2012 A.Bourque Initial release 1.1 6-Nov-2012 A.Bourque Minor corrections 1.2 28-Jan-2014 A.Bourque

ARCHIVE 2008 COPYRIGHT NOTICE

Keynote Speaker ARCHIVE 2008 Packaging & Assembly in Pursuit of Moore s Law and Beyond Karl Johnson Ph.D. Vice President and Senior Fellow Advanced Packaging Systems Integration Laboratory Freescale Semiconductor

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com Report Title: Report Type: Date: Qualification Test Report See Attached

Maxim Integrated Products 1

19-3093; Rev 0; 12/03 MAX3942 Evaluation Kit General Description The MAX3942 evaluation kit (EV kit) is an assembled demonstration board that provides electrical evaluation of the MAX3942 10.7Gbps modulator

Agilent s AXI History

Agilent s AXI History Development Overview Throughput Improvement Hardware Differences Software Release Comparison 8.X Software Stream Supportability Comparison Model and Major Change Details Model Differences

IPC-7351B was released in 2010 and supersedes IPC-7351A (which was released in 2007).

IPC-7351B Compliance Old Content - visit altium.com/documentation Modified by Jason Howie on Nov 13, 2014 Altium Designer 14.3 incorporates a number of additions and enhancements to both the IPC Compliant

EMBEDDED SYSTEMS BASICS

EMBEDDED SYSTEMS BASICS WORKSHOP by ELC Skyward SKYWARD EXPERIMENTAL ROCKETRY Who we are? 2 Our Purpose Skyward Experimental Rocketry is an active student association operating inside Politecnico di Milano,

Improved performance. APR-5000-XLS System configurations and technical specifications on pages 42-43

APR-5000-XL/-XLS Advanced Package Rework System The APR-5000-XL Advanced Package Rework System provides board capability with small board precision. This system performs precise, cost effective rework

JU1 JU6, JU15 JU20. Maxim Integrated Products 1

9-9; Rev 0; /0 MAX9 Evaluation Kit General Description The MAX9 evaluation kit (EV kit) contains a flowthrough low-voltage differential signaling (LVDS) quad differential line driver (MAX9) and receiver

M68HC705E24PGMR PROGRAMMER USER'S MANUAL

M68HC705E24PGMR/D Rev. 2 March 1995 M68HC705E24PGMR PROGRAMMER USER'S MANUAL Third Edition MOTOROLA Ltd., 1993, 1995; All Rights Reserved Motorola reserves the right to make changes without further notice

Using solderless breadboards

Page 1 of 9 Using solderless breadboards This document describes how to use the solderless breadboards available in the experimental didactic lab (LED, previously LADISPE) of Politecnico di Torino. 1 Setting

EVAL-ADT7516. SPI -/I 2 C -Compatible, Temperature Sensor, 4-Channel ADC and Quad Voltage Output DAC FEATURES APPLICATIONS

SPI -/I 2 C -Compatible, Temperature Sensor, 4-Channel ADC and Quad Voltage Output DAC EVAL-ADT7516 FEATURES Easy evaluation of the ADT7516 Can be used to emulate ADT7517 and ADT7519 Evaluation software

EVAL6494L. Demonstration board for L6494L gate driver. Description. Features

Demonstration board for L6494L gate driver Description Data brief Features Driver current capability: 2 A source, 2.5 A sink Integrated bootstrap diode Single input and shutdown pin Adjustable deadtime

The PUMPKIN LIGHT LED

The PUMPKIN LIGHT LED PUMPKIN LIGHT LED By Mark McCuller Email: mcculler@mail.com DESIGN SUMMARY The PUMPKIN LIGHT LED By: Mark McCuller The Pumpkin Light LED is a battery-powered device that illuminates

ES-562/564U COMBINATION CLOCK/TIMER

142 SIERRA ST., EL SEGUNDO, CA 90245 USA (310)322-2136 FAX (310)322-8127 www.ese-web.com ES-562/564U COMBINATION CLOCK/TIMER OPERATION AND MAINTENANCE MANUAL The ES-562U/564U is a combination six digit

High Power (15W + 15W) Stereo Amplifier

High Power (15W + 15W) Stereo Amplifier Build Instructions Issue 1.0 Build Instructions Before you put any components in the board or pick up the soldering iron, just take a look at the Printed Circuit

MAX1587AEVKIT. Maxim Integrated Products 1

19-3137; Rev 1; 2/07 General Description The MAX1587A evaluation system (EV system) consists of a MAX1587A evaluation kit (EV kit) and a companion Maxim CMAXQUSB board. The MAX1587A evaluation kit (EV