Accessories Catalog.

Transcription

1 Catalog

2 Table of Contents Item Category Page Number Liquid Oxygen Portable Backpacks 3 Liquid Oxygen Portable Hip Packs 4 Liquid Oxygen Portable Pull Behind Rolling Carts 6 Liquid Oxygen Portable Wheelchair Baskets 8 Liquid Oxygen Reservoir Rollerbase Assemblies 9 Nasal Cannulas 11 Transfilling Accessories 13 Testing Accessories 18 General Accessories 25 Flow Upgrades and Conversions 26 CAIRE Generation 4 Meter Upgrades 29 Spirit Upgrade Kits Used to upgrade older Spirit portables units to current design. 31 NOTE: This catalog is not an exhaustive list of all of our available accessories. If items not included in this catalog are needed, please contact the Technical Support Team in your region for further assistance. Technical Support USA Technical Support Europe (0) techservice.usa@chartindustries.com techservice.europe@chartindustries.com

3 Liquid Oxygen Portable Backpacks Backpack: Compatible with Spirit 600, Spirit 1200, Hi Flow, Stroller, and Sprint portables HELiOS Backpack H850: Designed and sized specifically for the HEliOS Marathon (H850). Equipped with moisture pad to collect condensation. Can also be converted to a hip pack C1000/C1000T Backpack: Backpack is designed to fit Companion C1000 and C1000T portables. Contains detachable single strap for carrying on the shoulder as well as two backpack straps. Page 3

4 Liquid Oxygen Portable Hip Packs B H300 Hip Pack: Pack for the HELiOS Plus (H300) designed to be worn on the hip Large Belt for H300 Hip Pack: Large replacement belt for the H300 hip pack only (B ) inches ( cm) Spirit 300 Belt Pack: Pack for the Spirit 300 that is designed to be worn on the hip. Page 4

5 Liquid Oxygen Portable Hip Packs Spirit 300 Belt Pack Waist Extension: Adjustable belt extension for the Spirit 300 belt pack. Compatible with part number # only Belt Pack Side Pouch: Accessory pouch to be used with the Spirit 300 belt pack (# ). Slides into the waist strap of the belt pack to allow for additional storage of accessories. 7 in x 4 in (17.8 cm x 20.3 cm) with a zipper top Belt Pack Side Pouch: Accessory pouch to be used with the Spirit 300 belt pack (# ). Slides onto the waist strap of the belt pack to allow for additional storage of accessories. 7 in x 8 in (17.8 cm x 20.3 cm) with a zipper top. B C500/C550 Hip Pack: Pack for the Companion C500 and C550 portables designed to be worn on the hip. Page 5

6 Liquid Oxygen Portable Pull Behind Rolling Carts B Companion Portable Cart: Twowheeled pull behind cart sized specifically for the Companion 1000 and 1000T portables Portable Cart: Two-wheeled pull behind cart with a velcro strap to secure portables. Compatible with HELiOS H300/H850, G2 (Tan Hard Case) Stroller, Hi Flow Stroller with Tan Hard Case. Page 6

7 Liquid Oxygen Portable Pull Behind Rolling Carts Portable Cart: Two-wheeled pull behind cart with a velcro strap to secure portables. Compatible with soft case Hi Flow Strollers, G3 and G4 Strollers. Page 7

8 Liquid Oxygen Portable Wheelchair Baskets B Wheelchair Basket: Basket attaches to the back of a standard wheelchair for easy transportation of the Companion C1000/C1000T and Hi Flow Stroller. Page 8

9 Liquid Oxygen Reservoir Rollerbase Assemblies CE Marked: Non CE Marked: Companion Reservoir Rollerbase: 14 roller base designed to easily roll and transport the Companion C21, C31, and C41 reservoirs. CE Marked: Non CE Marked: CE Marked: Non CE Marked: CE Marked: Non CE Marked: CE Marked: Non CE Marked: HELiOS Reservoir Rollerbase: 15 roller base designed to easily roll and transport the HELiOS H36, H46, U36, and U46 reservoirs. Liberator 10 Rollerbase: 12 roller base designed to easily roll and transport the Lib 10 reservoir. Liberator 20, 30, 37, 45 Rollerbase: 15 roller base designed to easily roll and transport the Liberator 20, 30, 37, and 45 reservoirs. Liberator 60 Rollerbase: 16 roller base designed to easily roll and transport the Liberator 60 reservoirs. NOTE: CE marked rollerbases are approved for sell and distribution in Europe. They contain 2 wheels that contain brakes, and 3 wheels that do not. Non CE marked reservoirs contain 5 wheels without brakes. Page 9

10 Liquid Oxygen Reservoir Rollerbase Assemblies CE Marked Casters: Replacement set of 3 casters for CE marked reservoir roller base assemblies. Include 5 casters total. 2 with brakes and 3 without brakes. Photo not available at this time Non CE Marked Casters: Replacement set of 3 casters for non CE marked reservoir roller base assemblies. Includes 5 casters without brakes. Page 10

11 Nasal Cannulas 4 ft (1.2 m): B ft (2.1 m): B Dual Lumen Cannula: Demand nasal cannula for use with HELiOS portables. Sense and delivery in separate nostrils (oxygen will only be delivered through 1 nostril). 5 ft (1.5 m): ft (2.1 m): Dual Lumen Cannula: Demand nasal cannula for use with HELiOS portables. Sense and delivery in both nostrils with a divided tube. 5 ft (1.5 m): ft (2.1 m): Dual Lumen Cannula: Demand nasal cannula for use with HELiOS portables. Sense and delivery in both nostrils using two tubes. 4 ft (1.2 m): ft (1.5 m): ft (2.1 m): Dual Lumen Cannula: Demand nasal cannula for use with HELiOS portables. Sense and delivery in both nostrils with a single tube. Page 11

12 Nasal Cannulas 5408-SEQ Standard Nasal Cannula: Single lumen 7 ft (2.1 m) cannula for continuous flow portables and reservoirs. Page 12

13 Transfilling Accessories Reservoir Vent Valve Wrench: Vent valve wrench for all Liberator reservoirs manufactured before July This vent valve wrench may also be used on all CAIRE reservoirs manufactured after July B Reservoir Vent Valve Wrench: Vent valve wrench for all HE- LiOS and Companion reservoirs manufactured before July This vent valve wrench may also be used on all CAIRE reservoirs manufactured after July CA Stroller Vent Key: Vent valve key for G2 and G2.5 Stoller portable units (older tan hard cases). B Pressure Gauge Assembly: Attaches to the flow control valve (FCV) outlet of a reservoir during transfill. Used to monitor and maintain the internal pressure of the reservoir during a fill. Page 13

14 Transfilling Accessories Super Flex Hose: 6 ft (1.8 m) oxygen service transfer line without swivel nuts. Used for filling liquid oygen reservoirs. One end connects to the transfill adaptor and the other end connects to the oxygen source. 4 ft (1.2 m): ft (1.8 m): ft (2.4 m): ft (3.0 m): ft (3.7 m): Transfer Hose: Standard oxygen service transfer line with swivel nuts used for transfilling liquid oygen reservoirs. One end connects to the transfill adaptor and the other end connects to the oxygen source Swivel Connector: Male end connects to transfer hose and female end connects to transfill adaptor. This allows the transfill adaptor to rotate freely. Page 14

15 Transfilling Accessories CA Inline Filter: Replacement filter for all transfill line adaptors CAIRE Top Fill Transfer Line Adaptor: Connects to the end of a transfer line. Used for transfilling into all top fill reservoirs with blue male PB fittings Male Side Fill Transfer Line Adaptor: Connects to the end of a transfer line. Used for transfilling into all Side Fill (SF) Liberator reservoirs Dual Fill Transfill Adaptor: Connects to the end of a transfer line. used for transfilling into all top fill (TF) reservoirs with a blue male PB fill connector and side fill (SF) Liberator reservoirs. Page 15

16 Transfilling Accessories Linde TF & CAIRE SF Dual Fill Transfill Adaptor: Connects to the end of a transfer line. Used for transfilling into top fill (TF) reservoirs with Linde fittings and side fill (SF) Liberator units Cryo-2 Transfer Line Adaptor: Connects to the end of a transfer line. Used for transfilling all top fill reservoirs with a Cryo-2 fitting. Photo not available at this time psi Female SF Transfer Line Adaptor: Connects to the end of a transfer line. Used for transfilling into side fill (SF) reservoirs with a male side fill fitting. Used to fill 50psi units Penox Female Transfer Line Adaptor: Connects to the end of a transfer line. Used for transfilling into all top fill (TF) reservoirs with a Penox top fill fitting. Page 16

17 Transfilling Accessories CAIRE TF & Linde TF Dual Fill Transfill Adaptor: Connects to the end of a transfer line. Used for transfilling into all top fill (TF) reservoirs with a blue male PB fill connector and top fill reservoirs with Linde fittings CAIRE SF & Penox TF Dual Fill Transfill Adaptor: Connects to the end of a transfer line. Used for transfilling into all side fill (SF) Liberator units and all top fill (TF) reservoirs with Penox fittings CAIRE SF & Pulsair TF Dual Fill Transfill Adaptor: Connects to the end of a transfer line. Used for transfilling into all side fill (SF) Liberator units and all top fill reservoirs with Pulseair fittings Fitting Adapter 90 D Page 17

18 Testing Accessories Erie Liter Meter, 0-8 LPM: used to measure continuous flow from reservoirs and portables between 0-8 LPM Erie Liter Meter, 6-15 LPM: Used to measure continuous flow from reservoirs and portables between 6-15 LPM psi ( bar) Pressure Gauge: Used for testing or verifying internal pressure of LOX portables and reservoirs. B Portable Test Fixture: Used to hold portable units during function testing. Prevents the portables from lying flat and makes easy access to all components. Especially useful for servicing HELiOS portables with the case removed. Page 18

19 Testing Accessories B Reservoir Pressurizing Fixture: Used with all top fill reservoirs to pneumatically pressurize the unit. Used for testing purposes and also for emptying and purging moisture from a reservoir Pneumatic Hose: Hose has DISS fittings on both ends. Used to connect a gaseous source of oxygen or nitrogen to test adaptors for gaseous testing of reservoirs and portables Male Side Fill Pneumatic Test Adaptor: Connects to a gaseous oxygen or nitrogen source (can use pneumatic hose # ) for gaseous testing of reservoir units with side fill (SF) connections. Page 19

20 Testing Accessories Female Side Fill Pneumatic Test Adaptor: Connects to a gaseous oxygen or nitrogen source (can use pneumatic hose # ) for gaseous testing of portable units with side fill (SF) connections Male Top Fill Pneumatic Test Adaptor: Connects to a gaseous oxygen or nitrogen source (can use pneumatic hose # ) for gaseous testing of portable units with blue female top fill connectors Female Top Fill Pneumatic Test Adaptor: Connects to a gaseous oxygen or nitrogen source (can use pneumatic hose # ) for gaseous testing of reservoirs with blue male top fill connectors. B Liquid Snoop (8 oz): Used for detecting leaks on all portables and reservoirs. Page 20

21 Testing Accessories B Liquid Snoop (1 gal): used for detecting leaks on all portables and reservoirs. B Jet Venturi Assembly: Essential component for testing the conservers of the H300 and H850. One end connects to a gaseous source and the other end connects to the bottom barb of the HELiOS portable to trigger demand flow Pulsemeter: Used to test the accuracy of pulse dosing with each breath of HELiOS and Spirit portables. Page 21

22 Testing Accessories NOTE: Recently changed to red color. B Krytox Lubricant: Lubrication used on fittings to help prevent cross-threading. Used on HELiOS and Companion resrvoirs and portables Dewar Cap: Used to cover the opening of Liberator and Companion reservoir dewars when the manifold has been removed. CA Christo-Lube: Lubrication used on fittings to help prevent crossthreading. Used on Liberator, Stroller, Sprint, and Spirit product lines Lip Seal Tool: Tool used to remove the locking mechanism on Side Fill Liberator reservoirs so that the lip seal can be removed. CA Side Fill Lip Seal: Plastic fitting that seals the mating male and female QDV s during the filling process from reservoir to portable QDV Assembly for Gas Analyzer Page 22

23 Testing Accessories CA Swivel Connector Kit CA O-Ring For Male 1-Pin ODV SF CA CA Static Seal: Plastic fitting used on top fill QDV s that seals the mating male and female QDV s during the filling process from reservoir to portable. TEFLON Tape: Tape used on threaded connections to prevent leaks at the connectiions. Used on all reservoirs and portables Capacitance Meter: Meter used to measure capacitance of the manifold on Liberator reservoirs and Sprint/Stroller portables with meters. Important for troubleshooting issues with the G4 content indicator. Page 23

24 Testing Accessories G4 Capacitance Kit: Used with the Capacitance Meter to test the capacitance of the G4 meter of the Liberator reservoir or Sprint/ Stroller portable. AAA0645 Soldering Flux: Used to clean the capacitance probe when soldering a new wire harness onto the probe. Use on Liberator reservoirs and Sprint/Stroller/Hi Flow portables with a G4 meter Solder 60/40 Lead Free: Used to solder new wire harness onto Liberator reservoirs and Spirit/ Sprint/Stroller portables with a G4 contents indicator meter. Page 24

25 General Accessories B FLO HELiOS Reservoir External FCV: 0-10 LPM Flow Control Valve for patients who wish to breath directly from the HELiOS reservoir. NOTE: This item is not compatible with EU models manufactured before December These units use # as an external FCV. B DISS Adaptor: Connects to the O2 outlet of a reservoir so that a patient can connect tubing or a cannula for direct breathing. B SV HELiOS Oxygen Supply Line: 50 ft (15.2 m) line used to connect the HELiOS H300 or H850 to a reservoir. When connected, the patient can breath the oxygen from the reservoir using the portable unit as a conserver. Page 25

26 Flow Upgrades and Conversions B Supply Line Tubing Extension: 50 ft (15.2 m) extension tubing for the HELiOS oxygen supply line (B SV). FCV Extension Liberator Accessory Kit: Contains condensate bottle, condensate elbow and bracket, and the G4 flow control valve extension. Drain Tube Elbow and Bracket Condensate Bottle Page 26

27 Flow Upgrades and Conversions B SV Companion Reservoir Drain Bottle Kit: Contains the drain bottle, drain tube, and bracket to fit all Companion reservoirs. The drain bottle attaches to the side of the reservoir and is used to collect condensation after frost on the coils as it melts. FCV (left) and Decal (right) Liberator 15LPM Upgrade Kit: Designed to upgrade older 6 LPM and 10 LPM Liberator reservoirs to 0-15 LPM flow capabilities. Kit includes: Replacement warming coil, 0-15 LPM FCV, cable ties (x3), nuts (x2), and ferrules (x2) Pediatric FCV: T Pediatric Decal: Sprint/Stroller Pediatric Conversion: Parts required to replace the flow control valve on G3 Liberator reservoir with a pediatric FCV capable of achieving these low rates: 0.05, 0.10, 0.20, 0.30, 0.40, 0.50, 0.75, 1.00, 1.25, 2.00 LPM. Page 27

28 Flow Upgrades and Conversions FCV T Pediatric FCV: T Pediatric Decal: Gen 3 Liberator Pediatric Conversion: Parts required to replace the flow control valve on G3 Liberator reservoir with a pediatric FCV capable of achieving these flow rates: 0.05, 0.10, 0.20, 0.30, 0.40, 0.50, 0.75, 1.0, 1.25, 2.00 LPM Decal FCV T Pediatric FCV: T Pediatric Decal: FCV Extension: CA Locking Plate: CA SRV: T Gen 4 Liberator Pediatric Conversion: Parts required to replace the flow control valve on G3 Liberator reservoir with a pediatric FCV capable of achieving these flow rates: 0.05, 0.10, 0.20, 0.30, 0.40, 0.50, 0.75, 1.0, 1.25, 2.00 LPM Decal CA CA T Page 28

29 CAIRE Generation 4 Meter Upgrades G3 to G4 Liberator Upgrade Kit: Kit to upgrade older Generation 3 Liberator reservoirs to the current Gen 4 contents indicator meter. Kit contains: G4 meter, ground wire, and wire harness adaptor G3 to G4 Stroller/Sprint Upgrade Kit: Kit to upgrade older Generation 3 Stroller and Sprint portable units to the current Gen 4 contents indicator meter. Kit contains: G4 meter and wire harness adaptor. Must order # (replacement dome cover) with the kit to complete the upgrade G2 to G4 Upgrade Kit for Portables and Reservoirs: Kit to upgrade older Generation 2 Stroller portables and Liberator reservoirs to the current Gen 4 contents indicator meter. Kit contains: G4 meter, wire harness adaptor, and replacement Stroller top cover. The Stroller top cover will not be used if upgrading a reservoir G4 High Flow Upgrade Kit: Kit to upgrade older Hi Flow portables (tan hard case) to the current Gen 4 contents indicator meter. Kit contains: G4 meter, wire harness adaptor, and replacement top cover. Page 29

30 CAIRE Generation 4 Meter Upgrades G3 to G4 Low Loss/EMS 20 Upgrade Kit: Kit to upgrade older Low Loss and EMS 20 reservoirs to the current Gen 4 contents indicator meter. Kit contains: G4 meter, wire harness adaptor, ground cable, and telemetry bracket. Must be ordered with the harness adaptor nut (# ). NOTE: All G4 meters received as part of an Upgrade Kit are not calibrated. These will need to be calibrated per the included instructions prior to use. Page 30

31 Spirit Upgrade Kits Knob Adaptor Repair Kit Simulated Leather Retro Kit 300 Side Fill Simulated Leather Retro Kit 300 Top Fill Battery Holder Upgrade Page 31

32 All illustrations and specifications contained herein are based on the latest product information at the time of publication. CAIRE Inc.reserves the right to discontinue its products, or change the prices, materials, equipment, quality, descriptions, specifications and/or processes to its products at any time without prior notice and with no further obligation or consequence. All rights not expressly stated herein are reserved by us, as applicable. Page 32