ma-bus Converter User Manual

Transcription

1 mabus Converter mabus Converter mabus converter, small Field cabinet (I/O 2AI / 3DI) mabus converter, wide field cabinet with Display (I/O 2AI / 3DI) mabus converter, small Field cabinet (I/O 2AI / 3DI) mabus converter, wide field cabinet with Display (I/O 2AI / 3DI) User Manual GB mabus Converter Manual 1105 Draft kj.doc 1/14

2 mabus Converter 1.0 MJK mabus Converter Principe overview Version Requirements Electrical connection Technical Specifications Order Numbers Connection Examples mabus / SuSix / MagFlux / phix Compact mabus / MagFlux / phix Compact mabus / Oxix / phix Compact mabus (2 pc.) / MagFlux/ phix Compact / ma (NH3) Configuration setup menus Main menus Analog inputs setup menus Service menus Register Lists mabus Converter Modbus Register List...13 GB mabus Converter Manual 1105 Draft kj.doc 2/14

3 mabus Converter 1.0 MJK mabus Converter Principe overview There are two configurations of the mabus converter. One is in the standard MJK field housing with blind lid, the other is in the MJK wide field housing with a display. The later configuration allows the converter from other MJK transmitters to be housed together with the mabus converter. With the mabus Converter the measured values are converted into Modbus values and displayed as engineering units. The large builtin data logger of the display unit offers time stamped entries. A trend curve of the logged data for the overview by the local operator is easily retrieved and shown in the display simply by pushing one button on the unit. The logged values can then be transferred as csv files to a PC. GB mabus Converter Manual 1105 Draft kj.doc 3/14

4 mabus Converter 2.0 Version Requirements The following software, firmware and hardware versions (or higher) are required: Converter HW ver.: Converter FW ver.: Display HW ver.: (HW5) Display FW ver.; Text file ver.: MJKField Link ver.: Electrical connection GB mabus Converter Manual 1105 Draft kj.doc 4/14

5 mabus Converter 2.2 Technical Specifications 2.3 Order Numbers GB US GB mabus Converter Manual 1105 Draft kj.doc 5/14

6 mabus Converter 2.4 Connection Examples mabus / SuSix / MagFlux / phix Compact GB mabus Converter Manual 1105 Draft kj.doc 6/14

7 mabus Converter mabus / MagFlux / phix Compact Display unit for mabus, small cabinet Display for Setup, readout and data logging of: ph Temp Field log s2 E1 E2 GND L1 L2 Flow sensor Display RS 485 A B AI1 AI2 Supply 24 VDC DI Main Supply COM DI1 DI2 DI3 PE N L Display RS 485 A B MagFlux DI Com DO1 C DO2 ma Mains Supply PE N L Wire 1 Red phix Compact Shield 2 ph Red 3 ph Black 4 Temp. Yellow 5 Temp. orange GB mabus Converter Manual 1105 Draft kj.doc 7/14

8 mabus Converter mabus / Oxix / phix Compact Display unit for mabus, small cabinet Display for Setup, readout and data logging of: Oxygen and ph (Readout of temperature optional ) ID 2 ID 1 Field log Bl Wh Gr Rd GND A B ShieldDC Oxix sensor Oxix Display RS 485 A B AI1 AI2 Supply 24 VDC DI Main Supply COM DI1 DI2 DI3 PE N L Display RS 485 A B ma DI DO1 DO2 Com NO Com Com NO Mains Supply PE N L WhiteGreyBlack Com. Cable WhiteGrey Black Wire 1 Red phix Compact Shield 2 ph Red 3 ph Black 4 Temp. Yellow 5 Temp. orange GB mabus Converter Manual 1105 Draft kj.doc 8/14

9 mabus Converter mabus (2 pc.) / MagFlux/ phix Compact / ma (NH3) Display unit for mabus, wide cabinet Display for Setup, readout and data logging of: ph Temp NH3 Flow Field log Field log s2 E1 E2 GND L1 L2 Flow sensor Display RS 485 A B AI1 AI2 Supply 24 VDC DI COM DI1 Main Supply DI2 DI3 PE N L Display RS 485 A B AI1 AI2 Supply 24 VDC DI COM DI1 Main Supply DI2 DI3 PE N L Display RS 485 A B MagFlux DI Com DO1 C DO2 ma Mains Supply PE N L Wire 1 Red phix Compact Shield ph ph Temp. Temp. Red Black Yellow orange NH3 4/20mA output magnd GB mabus Converter Manual 1105 Draft kj.doc 9/14

10 mabus Converter 3.0 Configuration setup menus 3.1 Main menus Field Log1 ph ph Back Select Set up Specify main Screen Factory Settings Display Data logger Password Sensor Name Converter setup Display setup Specify main Screen Select line Linie 1 Sensor Name Linie 2 AI 1 Linie 3 DI1 Linie 4 Linie 5 Factory setting Recover Factory setting Cancel Restore Converter Display Datalogger Set log interval 0010 sec Back Select > Password Login Activate/deactivate Set new password Select Line Content Not in use Sensor Name AI 1 AI 2 DI 1 DI 2 DI 3 Type password Back Select > Activate Deactivate 0000 Set new password 0000 Back Select > GB mabus Converter Manual 1105 Draft kj.doc 10/14

11 mabus Converter 3.2 Analog inputs setup menus Converter setup Analog Inputs Digital Inputs Status Service menu AI 1 Signal Name AI 2 Signal Name Analog Input # Scaling Signal Name Units Level Unit Flow Unit Volume Unit Other Units Analog Input # Signal Name Xxx Unit mm cm m Analog Input # Decimal point 010 < Select OK Analog Input # 4 ma scale cm Back/< Select OK Analog Input # 20 ma scale cm Back/< Select OK Analog Input # Average 060 sec Back/< Select OK GB mabus Converter Manual 1105 Draft kj.doc 11/14

12 mabus Converter 3.3 Service menus Converter setup Analog Inputs Digital Inputs Status Service menu Service menu Type password Back Select > Service menu Converter SW. Ver. Serial Number Back On Stock Converter SW version Serial Number Back on stock Converter Build 160 Bootload Build 719 Serial Number Recover factory Settings Cancel Back on stock Back OK Back OK GB mabus Converter Manual 1105 Draft kj.doc 12/14

13 mabus Converter 4.0 Register Lists 4.1 mabus Converter Modbus Register List Adress Password 0 Device type U16 None 1 Modbus ID U16 Password 2 Software type number U32 {Low} None 3 U32 {High} 4 SerielNo Converter Product ID U16 MJK_Only 5 Product type no U32 {Low} MJK_Only 6 U32 {High} 7 Hardware track no U16 MJK_Only 8 Hardware type no U32 {Low} MJK_Only 9 U32 {High} 10 Unit name STR 20 Password MJK Product ID 30 SerielNo Converter Product ID Long U32 {LW} MJK_Only 31 U32 {HW} Software Converter 32 Software build no U32 {Low} None 33 U32 {High} 34 Software sub type no U16 None 35 Firmware capability no U32 {Low} None 36 U32 {High} Input Status 100 DI 31 status U16 None 300 AI 1 scalled value F32{Low} None 301 F32{High} 302 AI 1 Unit U AI 1 Precision S AI 2 scalled value F32{Low} None 305 F32{High} 306 AI 2 Unit U AI 2 Precision S16 GB mabus Converter Manual 1105 Draft kj.doc 13/14

14 mabus Converter Modbus TX/RX 4950 Modbus RX OK Value U16 Password 4951 Modbus RX CRC Error Value U16 Password 4952 Modbus RX Parity Error Value U16 Password 4953 Modbus RX OK But Adr. not used Value U16 Password 4954 Modbus RX OK But Wrong ID Value U16 Password 4955 Modbus No Of Tx Value U16 Password Com Port Settings 5300 Com Port Baud rate Value U16 Password 5301 Com Port Baud rate Value Min U16 None 5302 Com Port Baud rate Value Max U16 None 5303 Com Port Paritet Value U16 Password 5304 Com Port Paritet Value Min U16 None 5305 Com Port Paritet Value Max U16 None 6187 STR Watch dog reset WD reset U16 Password WD reset Min U16 None WD reset Max U16 None Put Reset Counter To Zero Value U16 MJK_Only Put Reset Counter To Zero Value Min U16 None Put Reset Counter To Zero Value Max U16 None Software Control Software Speed Counter Value U16 Non Software run Main Counter Value U16 Non Software Eeprom Write Count Value U16 Non Software run Main Counter Peak Low Value U16 Non GB mabus Converter Manual 1105 Draft kj.doc 14/14