DW-2016 Details_CPCS_EngStds.dwt

Size: px

Start display at page:

Download "DW-2016 Details_CPCS_EngStds.dwt"

Doris Morton
6 years ago
Views:

1 Section 10.4 DW-2016 Details_CPCS_EngStds.dwt Overview - Section 10.4 This template shall be used to create detail drawings for DW Engineering Standards and the Capital Projects Construction Standards (CPCS) (Architectural, Mechanical, Structural, and Electrical); this template is not a C3D drawing, therefore it does not contain any custom C3D styles. This template is primarily used for Distribution and Capital Projects. Section DW-2016 Details_CPCS_EngStds.dwt

2 THIS PAGE INTENTIONALLY LEFT BLANK Section DW-2016 Details_CPCS_EngStds.dwt

3 Drawing Units In this template the drawing units have been set to Decimal Feet : Drawing Scales Only the acceptable drawings scales [see Section 4.1 Model/Paper Space and Annotation Scales] have been added to this template. Section DW-2016 Details_CPCS_EngStds.dwt

Viewports are placed for general guidance and can be modified and deleted as needed.

4 Layout Tabs This template has two predefined layout tabs (Paper Space) that contains the title block for details for Engineering or CPCS: Engineering Layout Tab The ENGINEERING layout tab references the Engineering Standards Engineering Standards 14th Edition 2012: NOTE: Viewports are placed for general guidance and can be modified and deleted as needed. In the lower right corner of the DW_ENG_STD_TB select the Dynamic grip for Visibility States the appropriate Title Block type: Section DW-2016 Details_CPCS_EngStds.dwt and choose

5 CPCS Layout Tab The CPCS layout tab references the Capital Projects Construction Standards 2 rd Edition 2014: NOTE: Viewports are placed for general guidance and can be modified and deleted as needed. In the lower right corner of the DW_CSPS_TB select the Dynamic grip for Visibility States and choose the appropriate Title Block type: Section DW-2016 Details_CPCS_EngStds.dwt

Annotation Every sheet within a plan set requires a certain level of labeling and annotation. Contained within this template are the standard styles for use with Civil based projects, see Section 13.

) have been created to be annotative, meaning they will scale up and down automatically based on the Drawing Scale.

6 Annotation Every sheet within a plan set requires a certain level of labeling and annotation. Contained within this template are the standard styles for use with Civil based projects, see Section 13.0 Labeling and Annotation for a full explanation of the Annotate tab located on the Ribbon. NOTE: All customized annotation styles (text styles, dim styles, etc.) have been created to be annotative, meaning they will scale up and down automatically based on the Drawing Scale. Text Styles DW s custom text styles are consistent throughout all of DW s templates, most text styles are based on a simplex font style: NOTE: When the Text Styles are used properly the settings above should never need to be modified. For plotting purposes, always place text on a Layer that indicates which text style was used: Plot Preview before correct layers set. Model Space view of text styles with correct layers set. NOTE: Each Discipline Designator has a specific set of text layers Section DW-2016 Details_CPCS_EngStds.dwt Plot Preview After correct layers set.

Dimension Styles DW s custom Dimension (Dim) Styles have been created to reference the corresponding Text Styles.

The Dim Styles located in this template are for Civil based work only: NOTE: When the Dim Styles are used properly the settings above should never need to be modified.

0' - Nearest 10th Text Style: L80 Text Color: 12 Rounds distance to the nearest tenth DIM Style: L80-0.

7 Dimension Styles DW s custom Dimension (Dim) Styles have been created to reference the corresponding Text Styles. All Dim Styles are based on a simplex font style, and text should be located above the line. The Dim Styles located in this template are for Civil based work only: NOTE: When the Dim Styles are used properly the settings above should never need to be modified. Below is a quick visual of how each Dim Style should appear: DIM Style: L80-0' - Nearest Ft Text Style: L80 Text Color: 12 Rounds distance to the nearest foot DIM Style: L80-0.0' - Nearest 10th Text Style: L80 Text Color: 12 Rounds distance to the nearest tenth DIM Style: L ' - Nearest 100th Text Style: L80 Text Color: 12 Rounds distance to the nearest hundredth DIM Style: L ' - Nearest 100th Text Style: L100 Text Color: 22 Rounds distance to the nearest hundredth Each Dim Style has been modified so that the lines are ByLayer/ByBlock, and text is set to plot at a Pen 2 width [see Section 16.1 Plot Styles (CTBs) Charts]: For plotting purposes, always place dimensions on the appropriate DIMS Layer: Section DW-2016 Details_CPCS_EngStds.dwt

8 Layer choices per Discipline Designator Plot Preview before correct layers set. Plot Preview After correct layers set Section DW-2016 Details_CPCS_EngStds.dwt

DW-2016 C3D Template.dwt

Section 10.1 DW-2016 C3D Template.dwt Overview - Section 10.1 This template is a Civil 3D template containing DW Engineering sections title blocks for Design Drafting, Distribution, and Survey. Each title