Product/Process Change Notice - PCN 14_0047 Rev. -
|
|
|
- Owen Copeland
- 5 years ago
- Views:
Transcription
1 Product/Process Change Notice - PCN 14_0047 Rev. - Analog Devices, Inc. Three Technology Way Norwood, Massachusetts This notice is to inform you of a change that will be made to certain ADI products (see Material Report). Any issues with this PCN or requirements to qualify the change (additional data or samples) must be sent to ADI within 30 days of publication date. ADI contact information is listed below. PCN Title: Publication Date: Effectivity Date: Conversion of 5x5mm body Size LFCSP Package Outlines from Punch to Sawn and Transfer of Assembly Site to Amkor Philippines. 12-Feb May-2014 (the earliest date that a customer could expect to receive changed material) Revision Description: Initial Release Description Of Change ADI has qualified and will be utilizing Assembly subcontractor Amkor in Philippines for 5x5mm body size LFCSP products. ADI has also qualified Amkor's standard bill of materials in a SAWN singulated leadframe. There will be no change in BOM. Pin1 indicator will be laser marked as part of the change. See attached for details and package outline differences. Reason For Change Sawn LFCSP is ADI's technology direction for LFCSP. The use of ADI qualified Amkor-Philippines as an assembly site will ensure continued source of product supply. ADI's assembly subcontractors manufacture our products using Analog Devices specified manufacturing flows, process controls and monitors. This assures that our customers receive the same level of quality and reliability on products they receive from qualified ADI manufacturing locations. Impact of the change (positive or negative) on fit, form, function & reliability The devices function and reliability as specified by the product datasheet will be unaffected by these changes. The Lead Foot Print Dimension will remain the same for both punch and sawn LFCSP packages Summary of Supporting Information Qualification has been performed per ADI0012, Procedure for Qualification of New or Revised Processes. See attached Qualification Report Summary. Supporting Documents Attachment 1: Type: Qualification Report Summary ADI_PCN_14_0047_Rev_-_Qualification Summary.pdf Attachment 2: Type: Detailed Change Description ADI_PCN_14_0047_Rev_-_Materials and Package Configuration.pdf Attachment 3: Type: Package Outline Drawing ADI_PCN_14_0047_Rev_-_Package Ouline Drawing.pdf Analog Devices, Inc. PCN 14_0047_Rev_- Page 1 of 4
2 For questions on this PCN, send to the regional contacts below or contact your local ADI sales representative Americas: Europe: Japan: Rest of Asia: Analog Devices, Inc. PCN 14_0047_Rev_- Page 2 of 4
3 Appendix A - Affected ADI Models Added Parts On This Revision - Product Family / Model Number (195) AD5800 / AD11/2048Z-0REEL AD5800 / AD11/2048Z-0REEL7 AD5800 / AD5800BCPZ-REEL AD5800 / AD5800BCPZ-REEL7 AD5800 / AD5800BCPZ-U1 AD5800 / AD5800BCPZ-U2 AD5801 / AD5801BCBZ-REEL AD5801 / AD5801BCBZ-REEL7 AD5801 / AD5801BCBZ-U2 AD5801 / AD5801BCBZ-U7 AD5801 / AD5801BCPZ-REEL AD5801 / AD5801BCPZ-REEL7 AD5808 / AD5808BCBZ-REEL AD5808 / AD5808BCBZ-REEL7 AD5808 / AD5808BCPZ-REEL AD5808 / AD5808BCPZ-REEL7 AD5808 / AD5808BCPZ-U1 AD7142 / AD7142ACPZ-1500RL7 AD7142 / AD7142ACPZ-1REEL AD7142 / AD7142ACPZ-500RL7 AD7142 / AD7142ACPZ-REEL AD7877 / AD7877ACBZ-REEL AD7877 / AD7877ACBZ-REEL7 AD7877 / AD7877ACPZ-500RL7 AD7877 / AD7877ACPZ-REEL AD7877 / AD7877ACPZ-REEL7 AD7877A / AD7877AACPZ-500-U1 AD7877A / AD7877AACPZ-500RL7 AD7877A / AD7877AACPZ-REEL AD7877A / AD7877AACPZ-REEL7 AD / AD7938BCPZ-6 AD / AD7938BCPZ-6REEL7 AD / AD7938BSUZ-6 AD / AD7938BSUZ-6REEL7 AD8101 / AD8101XCPZ AD8143 / AD8143ACPZ-R2 AD8143 / AD8143ACPZ-REEL AD8143 / AD8143ACPZ-REEL7 AD8145 / AD8145YCPZ-R2 AD8145 / AD8145YCPZ-R7 AD8145 / AD8145YCPZ-RL AD8153 / AD8153ACPZ AD8153 / AD8153ACPZ-RL7 AD8193 / AD8193ACPZ AD8193 / AD8193ACPZ-R7 AD8193 / AD8193XCPZ AD8194 / AD8194ACPZ AD8194 / AD8194ACPZ-R7 AD8194 / AD8194XCPZ AD8260 / AD8260ACPZ-R7 AD8260 / AD8260ACPZ-RL AD8332 / AD8332ACPZ-R2 AD8332 / AD8332ACPZ-R7 AD8332 / AD8332ACPZ-RL AD8333 / AD8333ACPZ-REEL AD8333 / AD8333ACPZ-REEL7 AD8364 / AD45231Z-R7 AD8364 / AD8364ACPZ-R2 AD8364 / AD8364ACPZ-REEL7 AD8366 / AD8366ACPZ-R7 AD8366 / AD8366XCPZ AD8372 / AD8372ACPZ-R7 AD8392A / AD8392AACPZ-R2 AD8392A / AD8392AACPZ-R7 AD8392A / AD8392AACPZ-RL AD8392A / AD8392AARE-RL AD8392A / AD8392AAREZ AD8392A / AD8392AAREZ-R7 AD8392A / AD8392AAREZ-RL AD8570 / AD8570ACP-REEL AD9609 / AD9609BCPZ-20 AD9609 / AD9609BCPZ-40 AD9609 / AD9609BCPZ-65 AD9609 / AD9609BCPZ-80 AD9609 / AD9609BCPZRL7-20 AD9609 / AD9609BCPZRL7-40 AD9609 / AD9609BCPZRL7-65 AD9609 / AD9609BCPZRL7-80 AD9609 / AD9609XCPZ-40 AD9609 / AD9609XCPZ-80 AD9629 / AD9629BCPZ-20 AD9629 / AD9629BCPZ-40 AD9629 / AD9629BCPZ-65 AD9629 / AD9629BCPZ-80 AD9629 / AD9629BCPZRL7-20 AD9629 / AD9629BCPZRL7-40 AD9629 / AD9629BCPZRL7-65 AD9629 / AD9629BCPZRL7-80 AD9629 / AD9629XCPZ-40 AD9649 / AD9649BCPZ-20 AD9649 / AD9649BCPZ-40 AD9649 / AD9649BCPZ-65 AD9649 / AD9649BCPZ-80 AD9649 / AD9649BCPZRL7-20 AD9649 / AD9649BCPZRL7-40 AD9649 / AD9649BCPZRL7-65 AD9649 / AD9649BCPZRL7-80 AD9649 / AD9649W AD9649 / AD9649XCPZ-80 AD9664 / AD9664ACPDNZ-REEL AD9665 / AD9665ACPZ-REEL AD9665 / AD9665ACPZ-REEL7 AD9667 / AD9667ACPZ-REEL AD9667 / AD9667ACPZ-REEL7 AD9668 / AD9668ACPZ-RL AD9740 / AD9740ACP-PCBZ AD9740 / AD9740ACPZ AD9740 / AD9740ACPZRL7 AD9740 / AD9740ARRL AD9740 / AD9740ARZ AD9740 / AD9740ARZRL ADA / ADA4410-6ACPZ-R2 ADA / ADA4410-6ACPZ-R7 ADA / ADA4410-6ACPZ-RL ADCLK948 / ADCLK948/PCBZ ADCLK948 / ADCLK948BCPZ ADCLK948 / ADCLK948BCPZ-REEL7 ADF4193 / ADF4193BCPZ-U1 ADF4193 / ADF4193BCPZ-U2 ADF4193 / ADF4193WCCPZ-U1 ADF4350 / ADF4350ABCPZ ADF4350 / ADF4350ABCPZ-RL7 ADF4350 / ADF4350ACCPZ-RL7 ADF4350 / ADF4350ACCPZ-U1 ADF4350 / ADF4350BCPZ ADF4350 / ADF4350BCPZ-RL ADF4350 / ADF4350BCPZ-RL7 ADF4350 / ADF4350BCPZ-U7 ADF4350 / ADF4901BCPZ ADF4350 / ADF4901BCPZ-RL7 ADF4350 / ADF4901BCPZ-U1 ADF4350 / ADF4902BCPZ ADF4350 / ADF4902BCPZ-RL7 ADF4350 / ADF4905BCPZ ADF4350 / ADF4905BCPZ-RL7 ADF4350 / ADF4906BCPZ ADF4350 / ADF4906BCPZ-RL7 ADF4350 / ADF4911BCPZ-RL7 ADF4350 / SB3F4350ABCPZ-RL7 ADF4351 / ADF4351BCPZ ADF4351 / ADF4351BCPZ-RL7 ADF4351 / ADF4351BCPZ-U6 ADF4351 / ADF4907BCPZ ADF4351 / ADF4907BCPZ-RL7 ADG1206 / ADG1206YCPZ-REEL7 ADG1207 / ADG1207YCPZ-REEL7 ADG1406 / ADG1406BCPZ-REEL7 ADG1407 / ADG1407BCPZ-REEL7 ADG1606 / ADG1606BCPZ-REEL7 ADG1607 / ADG1607BCPZ-REEL7 ADG2128 / ADG2128BCPZ-HS-RL7 ADG2128 / ADG2128BCPZ-REEL ADG2128 / ADG2128BCPZ-REEL7 ADG2128 / ADG2128YCPZ-HS-RL7 ADG2128 / ADG2128YCPZ-REEL ADG2128 / ADG2128YCPZ-REEL7 ADL5240 / ADL5240ACPZ-R7 ADL5240 / ADL5240XCPZ ADL5243 / ADL5243ACPZ-R7 ADL5304 / ADL5304ACPZ-R2 ADL5304 / ADL5304ACPZ-R7 ADL5304 / ADL5304ACPZ-RL ADL5336 / ADL5336ACPZ-R7 ADL5336 / ADL5336XCPZ-R7 ADL5353 / ADL5353ACPZ-R7 ADL5355 / ADL5355ACPZ-R7 ADL5357 / ADL5357ACPZ-R7 ADL5363 / ADL5363ACPZ-R7 ADL5363 / ADL5363XCPZ ADL5365 / ADL5365ACPZ-R7 ADL5367 / ADL5367ACPZ-R7 ADL5367 / ADL5367XCPZ ADL5519 / ADL5519ACPZ-R2 ADL5519 / ADL5519ACPZ-R7 ADL5534 / ADL5534ACPZ-R7 ADN2817 / ADN2817ACPZ ADN2817 / ADN2817ACPZ-RL ADN2817 / ADN2817ACPZ-RL7 ADN2818 / ADN2818ACPZ ADN2818 / ADN2818ACPZ-RL ADN2818 / ADN2818ACPZ-RL7 ADP1043 / ADP1043ACPZ ADP1043 / ADP1043ACPZ-RL ADP1043A / ADP1043AACPZ-R7 ADP1043A / ADP1043AACPZ-RL ADP1043A / ADP1045ACPZ-RL ADP1823 / ADP1823ACPZ-R7 ADP1829 / ADP1829ACPZ-R7 ADP2114 / ADP2114ACPZ-R2 ADP2114 / ADP2114ACPZ-R7 ADP2116 / ADP2116ACPZ-R7 ADRF6510 / ADRF6510ACPZ-R7 ADRF6516 / ADRF6516ACPZ-R7 ADUC7061 / ADUC7061BCPZ32 ADUC7061 / ADUC7061BCPZ32-RL Analog Devices, Inc. PCN 14_0047_Rev_- Page 3 of 4
4 Appendix B - Revision History Rev Publish Date Effectivity Date Rev Description Rev Feb May-2014 Initial Release Analog Devices, Inc. DocId:2771 Parent DocId:2737 Layout Rev:7 Analog Devices, Inc. PCN 14_0047_Rev_- Page 4 of 4
5 Package Outline (Punch and Sawn LFCSP) COMPARISON CURRENT NEW REMARKS Package Punch Sawn Figure Punch has flange edges. Sawn has sharp square edges. Thickness 0.85 mm (Nom.) 0.75 mm (Nom.) Sawn is Thinner Foot Print Lead width and length dimensions and tolerances are the same.
6 Package Outline Drawing of Punch Type and Corresponding Sawn Type Body Size Lead Count E-Pad Size Punch Type Sawn Type 4x x2.10 CP-20-1 CP x x3.10 CP-32-2 CP x x4.10 CP-48-3 CP-48-5 NOTE: drawing are found in
7 Package Dimensions PUNCH SAWN 0.85mm 0.75mm LEAD WIDTH Package Thickness Difference Exposed Pad, Lead Length and Lead Width dimensions remains within tolerance. LEAD LENGTH Body Size Lead Count Lead Pitch Punch LFCSP Sawn LFCSP Exposed Pad Size CP 16-6 CP x CP 20-5 CP x x CP 32-8 CP x 2.7 CP 32-2 CP x 3.1 CP 32-3 CP x 3.3 CP 32-4 CP x 3.5
8 Package Outline Drawing () Dimensional Analysis Body Size Lead Count Spec Punch Type LFCSP E-Pad Size (mm SQ.) Lead Length Lead Width Spec Sawn Type LFCSP E-Pad Size (mm SQ.) 5x5 16 CP ± ±0.05 CP ± x5 20 CP ± x5 32 CP ± ± CP ± ± CP ± ± CP ± ± CP ± Lead Length Lead Width ± CP ± ± CP ± ± CP ± ± CP ±
9 Bill of Materials and Package Configuration Material FROM Amkor - Korea Remarks Die Attach Ablestik 8290 Ablestik 8290 Same Wire Au Au Same Mold Compound Sumitomo G700 Sumitomo G700 Same Leadframe C194 C194 Same Package: Side Top TO Amkor - Philippines Punch: Flange Sawn: Square Sawn: Pin 1 is Laser Marked Square Edge Bottom Same Foot Print
Product/Process Change Notice - PCN 13_0241 Rev. -
Product/Process Change Notice - PCN 13_0241 Rev. - Analog Devices, Inc. Three Technology Way Norwood, Massachusetts 02062-9106 This notice is to inform you of a change that will be made to certain ADI
Product Discontinuance Notice - PDN 16_0062 Rev. -
Product Discontinuance Notice - PDN 16_0062 Rev. - Analog Devices, Inc. Three Technology Way Norwood, Massachusetts 02062-9106 This notice is to inform you of a product discontinuance for certain ADI products
Product/Process Change Notice - PCN 16_0026 Rev. C
Product/Process Change Notice - PCN 16_0026 Rev. C Analog Devices, Inc. Three Technology Way Norwood, Massachusetts 02062-9106 This notice is to inform you of a change that will be made to certain ADI
LQFP. Thermal Resistance. Body Size (mm) Pkg. 32 ld 7 x 7 5 x ld 7 x 7 5 x ld 14 x 14 8 x ld 20 x x 8.5
LQFP Low Profile Quad Flat Pack Packages (LQFP) Amkor offers a broad line of LQFP IC packages designed to provide the same great benefits as MQFP packaging with a 1.4 mm body thickness. These packages
Product / Process Change Notification
Dear Customer, Attached please find an updated PCN 2013-010-A for your attention. Updates covered by A1 version: Time schedule: 1. First (PCN) samples and Q-results availability postponed (refer to page
PEX8619 (Vehicle: PEX 8619 BA50BC Green & non-green) Reliability Product Qualification Report
PEX8619 (Vehicle: PEX 8619 BA50BC Green & non-green) Reliability Product Qualification Report Family Qualification: PEX8619 BA50BC (Green & non-green) PEX8618 BA50BC (Green & non-green) PEX8617 BA50BC
FINAL PRODUCT/PROCESS CHANGE NOTIFICATION Generic Copy. 21-Oct SUBJECT: ON Semiconductor Final Product/Process Change Notification #16164
FINAL PRODUCT/PROCESS CHANGE NOTIFICATION Generic Copy 21-Oct-2008 SUBJECT: ON Semiconductor Final Product/Process Change Notification #16164 TITLE: Addition of PLCC20 / 28 package assembly capabilities
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Qualification of new BOM for select devices in QFP package Change Notification / Sample Request Date: 7/22/2014 To: MOUSER PCN Dear Customer: This is an
800 W. 6 th Street, Austin, TX 78701
800 W. 6 th Street, Austin, TX 78701 Assembly Site Transfer from StatsChipPac Kuala Lumpur, Malaysia (SCM) to ANST Wuxi CHINA for the CS42L51-CNZ(R), CS42L51-DNZ(R), CS43L21-CNZ(R), CS53L21-CNZ(R) and
Process Change Notice #
User Registration Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document updates, new product announcements, how-to and design documents,
Количество (шт.) Наименование. Производитель
Наименование Количество (шт.) Производитель AD698APZ 882 Analog Devices AD8015ARZ-REEL7 928 Analog Devices ADM2483BRW 1 785 Analog Devices ADM3202ARN 2 070 Analog Devices AD5344BRU 167 Analog Devices AD7476AAKSZ-500RL7
800 W. 6 th Street, Austin, TX 78701
800 W. 6 th Street, Austin, TX 78701 Assembly Site Transfer from StatsChipPac Kuala Lumpur, Malaysia (SCM) to ANST Wuxi CHINA for the CS4265-CNZ(R) component Process/Product Change Notification (Reference
800 W. 6 th Street, Austin, TX 78701
800 W. 6 th Street, Austin, TX 78701 Assembly Site Transfer from StatsChipPac Kuala Lumpur, Malaysia (SCM) to ANST Wuxi CHINA for the CS42L51-CNZ(R), CS42L51-DNZ(R), CS43L21-CNZ(R), CS53L21-CNZ(R) and
PRODUCT/PROCESS CHANGE NOTICE (PCN)
PCN #: Integrated Device Technology, Inc. MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: 7132, 7133 and 7134 Families Product Mark Back Mark Manufacturing Location Affected: Salinas, California
2.5 V/3.3 V, 8-Bit, 2-Port Level Translating, Bus Switch ADG3245
V/3.3 V, 8-Bit, 2-Port Level Translating, Bus Switch ADG3245 FEATURES 225 ps Propagation Delay through the Switch 4.5 Switch Connection between Ports Data Rate 1.244 Gbps V/3.3 V Supply Operation Selectable
12500 TI Boulevard, MS 8640, Dallas, Texas PCN# Add Cu as Alternative Wire Base Metal plus new Mount Compound for Selected Device(s)
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Add Cu as Alternative Wire Base Metal plus new Mount Compound for Selected Device(s) Change Notification / Sample Request Date: 8/11/2016 To: MOUSER PCN
RClamp3324T PRELIMINARY. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics (T=25 o C Unless Otherwise Specified) I PP V R
- RailClamp Description The RClamp 3324T provides ESD protection for USB3., HDMI.3/.4, and other high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
USB Port USB 2.0 Hub Controller PRODUCT FEATURES. Data Brief
USB2502 2-Port USB 2.0 Hub Controller PRODUCT FEATURES Data Brief Integrated USB 2.0 Compatible 2-Port Hub High-Speed (480Mbits/s), Full-Speed (12Mbits/s) and Low-Speed (1.5Mbits/s) compatible Full power
ADVANCE PRODUCT CHANGE NOTIFICATION
Cypress Semiconductor Corporation, 198, Champion Court, San Jose, CA 95134. Tel: (408)943-2600 ADVANCE PRODUCT CHANGE NOTIFICATION APCN: PCN145274 Date: March 13, 2014 Subject: Planned Transfer of Assembly
PCN Number: A PCN Date: 10/31/2013. Qualification of ASESH, TITL and JCAP as Additional Assembly / Test Site for Select Devices Customer
PCN Number: 20130903003A PCN Date: 10/31/2013 Title: Qualification of ASESH, TITL and JCAP as Additional Assembly / Test Site for Select Devices Customer Quality PCN_ww_admin_team@list.ti.com Phone: +1(214)480-6037
Switches and Multiplexers Portfolio
Switches and Multiplexers Portfolio Analog Devices offers a large range of switches and multiplexers covering single to multiple switch elements with various signal ranges and in a variety of packages
Product Configuration Solder Tail Press-fit Tail MBCE Vertical Receptacle Yes Yes MBCE Right Angle Receptacle Yes / MBCE Straddle Mount Yes /
Application Specification 114-128016 28 FEB 17 Rev A3 NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches]. Unless otherwise
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 Hybrid Au/Cu wire bond flow for NFBGA Shiva and Freon Devices Change Notification / Sample Request Date: 6/23/2014 To: Newark/Farnell PCN Dear Customer:
8-line IPAD low capacitance EMI filter and ESD protection in QFN package
Datasheet 8-line IPAD low capacitance EMI filter and ESD protection in QFN package Features 1 QFN 16L 3.3 mm x 1.5 mm (bottom view) 100 Ω Input 1 Output 1 C = 22.5 pf C = 22.5 pf Typical line capacitance
QUALIFICATION REPORT RELIABILITY LABORATORY PCN #: JAON-14ZJMR243. Date: August 22, 2016
QUALIFICATION REPORT RELIABILITY LABORATORY PCN #: JAON-14ZJMR243 Date: August 22, 2016 Qualification of palladium coated copper with gold flash (CuPdAu) bond wire in selected products of the 0.18um TSMC
Product Change Notification - KSRA-22IJAZ772
Product Change Notification - KSRA-22IJAZ772-13 Sep 2017 - CCB 3009 and 3085 Ini... http://www.microchip.com/mymicrochip/notificationdetails.aspx?pcn=ksra-22ijaz772... Page 1 of 2 9/14/2017 Product Change
+2.5 V Low Power Precision Voltage Reference REF43
+2.5 V Low Power Precision Voltage Reference REF43 FEATURES PIN CONFIGURATION GENERAL DESCRIPTION The REF43 is a low power precision reference providing a stable 2.5 V output independent of variations
PRECISION TOOLING CENTER. 160 Series IC Testing & Handling Tools PULL TEST PINS DAGE SERIES 24XX
PULL TEST PINS DAGE SERIES 24XX Type of Tool: 160 OT2 PTP - XX Material: Tungsten Wire, S/S 303 160-OT12-PTP-XX d±0.01 Foot Length Max (grams) Reference 160-OT2-PTP-01 0.025 (1) 0.125 (5) 10 HK-47-5-1
PG-FP6 Flash Memory Programmer for Renesas MCUs with Flash Memory
[Notification] Transfer is Easy from PG-FP5 to PG-FP6! PG-FP6 Flash Memory Programmer for Renesas MCUs with Flash Memory Outline R20TS0315EJ0100 Rev.1.00 The PG-FP5 flash memory programmer, which is widely
Optical Evaluation Kit for the ADN2530 Differential VCSEL Driver EVAL-ADN2530
Optical Evaluation Kit for the ADN2530 Differential VCSEL Driver EVAL-ADN2530 GENERAL DESCRIPTION This data sheet describes the optical evaluation kit for the ADN2530, a 10 Gbps active back-terminated,
Blueprint B204. NINA-B1 USB dongle. Application Note
Blueprint B204 NINA-B1 USB dongle Application Note Abstract This application note describes the features and design of B204. This design is available to u-blox customers as a blueprint, including the schematics,
SLG7NT4505 GreenPAK TM. 1 Hz Interrupt Generator. General Description. Pin Configuration
GreenPAK TM General Description Silego GreenPAK SLG7NT4505 is a low power and small form device. The SoC is housed in a 2mm x 2mm TDFN package which is optimal for using with small devices. Features Low
Product Change Notification PCN Additional Manufacturer for the XC18V00 Family of In- System Programmable Configuration PROMs
Product Change Notification PCN2003-04 Additional Manufacturer for the XC18V00 Family of In- System Programmable Configuration PROMs Overview: This notification is to inform you of an additional wafer
Product Change Notification - JAON-14ZGDV728 (Printer Friendly)
Product Change Notification - JAON-14ZGDV728-09 Oct 2016 - CCB 2701 Final Noti... http://www.microchip.com/mymicrochip/notificationdetails.aspx?pcn=jaon-14zgdv... Page 1 of 4 10/11/2016 English Search...
Surface Mount Multilayer Ceramic Chip Capacitors
Surface Mount Multilayer Ceramic Chip Capacitors Access hole at slot location (Ø 40 mm min.) W 3 Includes flange distortion at outer edge D Full radius W 2 (measured at hub) A C Arbor hole diameter N (hub
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 PCN# 20150413000 Pin 1 Indicator marking change for 1x1mm X2SON (DQN, DPF) package devices Information Only Date: 5/4/2015 To: Newark/Farnell PCN Dear Customer:
Small Signal Zener Diodes
BZX8-G-Series Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T ; specification Pulse current Int. construction Single FEATURES Silicon planar Zener
Agilent 1GC GHz Integrated Diode Limiter TC231P Data Sheet
Agilent 1GC1-8235 0-20 GHz Integrated Diode Limiter TC231P Data Sheet Features Two Independent Limiters for Single ended or Differential Signals Can be Biased for Adjustable Limit Level and Signal Detection
Product Application Specification For Connector. Product Application Specification For Connector. Micro cool edge Orthogonal NF1/NGSFF series
Rev. A1 ECN # CDXXXX 1 of 10 REVISION RECORD REV PAGE DESCRIPTION ECN# DATE Prepared By A ALL FIRST RELEASE CD1143 22.Nov,2017 Yunx.liu A1 ALL Update to Add Micro cool edge CDXXXX 10.Jul,2018 Yunx.liu
MAXIM INTEGRATED PRODUCTS
RELIABILITY REPORT FOR MAX186AEAP+ PLASTIC ENCAPSULATED DEVICES July 28, 2009 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086 Approved by Ken Wendel Quality Assurance Director, Reliability
RELIABILITY REPORT FOR MAX2055EUP PLASTIC ENCAPSULATED DEVICES. April 2, 2004 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086
MAX2055EUP Rev. A RELIABILITY REPORT FOR MAX2055EUP PLASTIC ENCAPSULATED DEVICES April 2, 2004 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086 Written by Reviewed by Jim Pedicord Quality
Innovative 3D Structures Utilizing Wafer Level Fan-Out Technology
Innovative 3D Structures Utilizing Wafer Level Fan-Out Technology JinYoung Khim #, Curtis Zwenger *, YoonJoo Khim #, SeWoong Cha #, SeungJae Lee #, JinHan Kim # # Amkor Technology Korea 280-8, 2-ga, Sungsu-dong,
HSP line ESD protection for high speed lines. Applications. Description. Features. µqfn 4 leads. Benefits. Complies with following standards
2-line ESD protection for high speed lines Datasheet - production data Benefits High ESD robustness of the equipment Suitable for high density boards Complies with following standards MIL-STD 883G Method
Ultra Thin Substrate Assembly Challenges for Advanced Flip Chip Package
Ultra Thin Substrate Assembly Challenges for Advanced Flip Chip Package by Fred Lee*, Jianjun Li*, Bindu Gurram* Nokibul Islam, Phong Vu, KeonTaek Kang**, HangChul Choi** STATS ChipPAC, Inc. *Broadcom
12500 TI Boulevard, MS 8640, Dallas, Texas PCN# B BGA Tray Change Final Change Notification
12500 TI Boulevard, MS 8640, Dallas, Texas 75243 BGA Tray Change Final Change Notification Date: April 06, 2017 To: PREMIER FARNELL PCN Dear Customer: Revision B is to update the description of change
ESD5Z2.5T1G Series, SZESD5Z2.5T1G Series. Transient Voltage Suppressors. Micro Packaged Diodes for ESD Protection
ESD5Z2.5T1G Series, SZESD5Z2.5T1G Series Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD5Z Series is designed to protect voltage sensitive components from ESD and transient
CM1219. Low Capacitance Transient Voltage Suppressors / ESD Protectors
Low Capacitance Transient Voltage Suppressors / ESD Protectors Description The family of devices features transient voltage suppressor arrays that provide a very high level of protection for sensitive
ESDA7P120-1U1M. High power transient voltage suppressor
SDA7P120-1U1M High power transient voltage suppressor Datasheet - production data Pin2 Pin1 Applications Where transient overvoltage protection in SD sensitive equipment is required, such as: Smartphones,
EV-VNH7040AY. VNH7040AY Evaluation Board. Features. Description
EV-VNH7040AY Evaluation Board Data brief Features Parameter Symbol Value Unit Max transient supply voltage V CC 38 V Operating voltage range V CC 4 to 28 V Typ. on-state resistance (per Ch) R ON 40 mω
RClamp2504P & RClamp3304P RailClamp 2.5V & 3.3V TVS Arrays
- RailClamp Description RailClamp is a low capacitance TS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
L9945. Automotive fully configurable 8-channel High/Low side MOSFET pre-driver suitable for 12 V and 24 V systems. Data brief.
Data brief Automotive fully configurable 8-channel High/Low side MOSFET pre-driver suitable for 12 V and 24 V systems Features TQFP64 exposed pad down Product status link L9945 Product summary GADG1606171506PS
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) 25 C VALUE 8 x 8 x 0 to 8 x 8 x 2 Rated capacitance range, C R 0
HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS HEADERS & RECEPTACLES TE CONNECTIVITY (TE) 2.5mm,HDR,2pos,Vertical, Connector HPI
Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages
Freescale Semiconductor Engineering Bulletin EB360 Rev. 1, 10/2005 Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages This document describes the differences between the 196-pin
RClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
USB-OTG BUS-Port ESD Protection for V BUS = 12 V
USB-OTG BUS-Port ESD Protection for V BUS = 12 V 6 5 4 1 2 3 MARKING (example only) 2517 Dot = pin 1 marking XX = date code YY = type code (see table below) 7 2112 XX YY DESIGN SUPPORT TOOLS click logo
ESDA7P60-1U1M. High power transient voltage suppressor. Description. Features. Applications. Complies with the following standards:
High power transient voltage suppressor Description Datasheet - production data The ESDA7P60-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
P0603V24 ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION The is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only
Product Tape and Reel, Solderability & Package Outline Specification
Manufacturing Note MN-001 Product Tape and Reel, Solderability & Package Outline Specification Contents 1. General Information 2. Tape and Reel / T&R 3. Package Outline Drawing / POD 4. Electro Static
ESDA8P80-1U1M. High power transient voltage suppressor. Description. Features. Applications
High power transient voltage suppressor Description Datasheet - production data The ESDA8P80-1U1M is a unidirectional single line TVS diode designed to protect the power line against EOS and ESD transients.
12500 TI Boulevard, MS 8640, Dallas, Texas 75243
2500 TI Boulevard, MS 8640, Dallas, Texas 75243 PN 2060309000 TPS6223TDRYRQ and TPS62234TDRYRQ LLGA to etch and Datasheet update for TPS6223-Q/TPS62234-Q Final hange Notification Date: 3/30/206 To: EBV
MAXIM INTEGRATED PRODUCTS
MAX149xxxP Rev. A RELIABILITY REPORT FOR MAX149xxxP PLASTIC ENCAPSULATED DEVICES October 13, 2004 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086 Written by Jim Pedicord Quality Assurance
ESD9X3.3ST5G SERIES. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection
Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD9X Series is designed to protect voltage sensitive components from ESD. Excellent clamping capability, low leakage, and fast
NUP2114 Series, SNUP2114UCMR6T1G Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data
NUP2114 Series, SNUP2114UCMR6T1G Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data The NUP2114 transient voltage suppressor is designed to protect high speed data lines from
APPLICATION SPECIFICATION
IPASS 0.8mm PITCH I/O CONNECTOR 1.0 SCOPE...2 2.0 PRODUCT DESCRIPTION...2 2.1 PRODUCT NAME AND SERIES NUMBER...2 2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS...2 3.0 REFERENCE DOCUMENTS...2 3.1 MOLEX
TClamp1202P. Low Capacitance TClamp Surge Protection for 12V Interfaces. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
TClamp122P Low Capacitance TClamp Surge Protection for 12V Interfaces PROTECTION PRODUCTS Description TClamp 122P provides dedicated surge and ESD protection for RS-485 and other 12V lines in industrial
ESDALC20-1BF4. Low clamping, low capacitance bidirectional single line ESD protection. Description. Features. Applications
Low clamping, low capacitance bidirectional single line ESD protection Description Datasheet - production data The ESDALC20-1BF4 is a bidirectional single line TVS diode designed to protect the data line
RClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
FMT Lens Series for Cree XLamp 1 LEDs
FMT Lens Series for Cree XLamp 1 LEDs Small bubble optic for maximum design flexibility High light efficiency Tape and Reel packaging for automated manufacturing processes Includes alignment and glue features
MAXIM INTEGRATED PRODUCTS
RELIABILITY REPORT FOR MAX11060GUU+ PLASTIC ENCAPSULATED DEVICES May 18, 2011 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086 Approved by Sokhom Chum Quality Assurance Reliability Engineer
PCN Number: PCN Date: 09/29/2015 TPS76950 LEN to NFME Customer. Quality PCN Manager PCN Type: 180 day Dept: Contact:
PCN Number: 20150914001 PCN Date: 09/29/2015 Title: TPS76950 LEN to NFME Customer Quality PCN Manager PCN Type: 180 day Dept: Contact: Services Proposed 1 st Ship Date: 03/29/2016 Estimated Sample Date
LD A very low drop adjustable positive voltage regulator. Description. Features
7 A very low drop adjustable positive voltage regulator Description Datasheet - production data Features P ² PAK Output current limit Low-dropout voltage: typically 400 mv at 7 A output current Output
MAXIM INTEGRATED PRODUCTS
MAX542xxxD Rev. B RELIABILITY REPORT FOR MAX542xxxD PLASTIC ENCAPSULATED DEVICES June 14, 2002 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086 Written by Reviewed by Jim Pedicord Quality
RELIABILITY REPORT FOR. MAX4544xxx PLASTIC ENCAPSULATED DEVICES. October 10, 2001 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086
MAX4544xxx Rev. A RELIABILITY REPORT FOR MAX4544xxx PLASTIC ENCAPSULATED DEVICES October 10, 2001 MAXIM INTEGRATED PRODUCTS 120 SAN GABRIEL DR. SUNNYVALE, CA 94086 Written by Reviewed by Jim Pedicord Quality
PRE: See Yun Jaan 15 Jul 08 Rev C. APP: Leong See Fan DCR No. D _438039
Application 114-1114 Specification PRE: See Yun Jaan 15 Jul 08 Rev C APP: Leong See Fan DCR No. D20080715001838_438039 SO(Small Outline) DIMM (Dual-In Memory Module) Sockets, 144 Positions with 0.8mm Centerline
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com Report Title: Report Type: Date: Qualification Test Report See Attached
AN2261 APPLICATION NOTE
APPLICATION NOTE GPIO ports configuration in ST30 devices INTRODUCTION The General Purpose IO (GPIO) Ports of ST30 devices are programmable by software in several modes:, Output, Alternate Function,, Output
Bringing 3D Integration to Packaging Mainstream
Bringing 3D Integration to Packaging Mainstream Enabling a Microelectronic World MEPTEC Nov 2012 Choon Lee Technology HQ, Amkor Highlighted TSV in Packaging TSMC reveals plan for 3DIC design based on silicon
Small Signal Zener Diodes
MMSZ22 to MMSZ267 Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 7 V Test current I ZT 1.7 to 2 ma V Z specification Thermal equilibrium Int. construction
NUP4114UCW1T2G. Transient Voltage Suppressors. ESD Protection Diodes with Low Clamping Voltage
Transient Voltage Suppressors ESD Protection Diodes with Low Clamping Voltage The NUP4114UCW1 transient voltage suppressor is designed to protect high speed data lines from ESD. Ultra low capacitance and
APPLICATION SPECIFICATION TITLE PAGE REVISION
1 of 10 E 1 OBJECTIVE...2 2 SCOPE...2 3 GENERAL...2 4 DRAWINGS AND APPLICABLE DOCUMENTS...2 5 APPLICATION REQUIREMENTS...2 5.1 PCB layout... 2 5.2 Keep-out zone... 2 5.3 Packaging... 2 5.4 Multiple connector
P0201V05 ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE ESD PROTECTION COMPONENT DESCRIPTION The is an ultra low capacitance ESD component designed to protect very high-speed data interfaces. The device has a typical capactiance of only
FPC connectors (0.2mm pitch) Back lock
0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
APPLICATION SPECIFICATION. 1 of 33 J (r/a header, r/a receptacle, vertical header, vertical receptacle TABLE OF CONTENTS 1. OBJECTIVE...
1 of 33 J Section TABLE OF CONTENTS page no. 1. OBJECTIVE...2 2. SCOPE...2 3. APPLICABLE DOCUMENTS...3 4. GENERAL CUSTOMER INFORMATION...3 4.1. CONNECTOR CONFIGURATIONS...3 4.2. COMPATIBILITY WITH HARD
L9966. FlexInput IC for automotive applications. Data brief. Features. Description
Data brief FlexInput IC for automotive applications Features AEC-Q100 qualified 12 V and 24 V systems compatible (operating battery supply voltage 5.5 V-36 V) Programmable interface with 15 total inputs:
Mission. Values. Objectives. Continuously implement cost control procedures
Skyworks Mexicali The Skyworks Promise Skyworks design and manufacturing facility in Mexicali, Mexico, provides assembly, test and finishing services for a wide portfolio of semiconductor solutions. We
PCI Express Right Angle Connectors
PCI Express Right Angle Connectors ED. 01 09.2015 Original Size PCI Express Right Angle Connector Catalog E 074641 DESCRIPTION GENERAL Right Angle Connectors These card edge connectors are designed to
HIGH SPEED MEZZANINE APPLICATION SPECIFICATION
APPLIATION SPEIFIATION BOARD TO BOARD ONNETOR 75005 Receptacle Assembly 75003 Plug Assembly Table of ontents 1.0 Scope 2.0 Product Description 3.0 Applicable Documents and Specifications 4.0 Insertion
EMIF03-SIM06F3. 3-line IPAD, EMI filter including ESD protection. Description. Features. Application. Complies with the following standards:
3-line IPAD, EMI filter including ESD protection Description Datasheet production data The EMIF03-SIM06F3 chip is a highly integrated audio filter device designed to suppress EMI/RFI noise in all systems
Revision Change Notice #
User Registration Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document updates, new product announcements, how-to and design documents,
Materials. Specification Operating temperature range. 55 C to +105 C Current rating
PC BOARD CONNECTORS 700 SERIES Features The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder
EV-VNQ5E050AK VNQ5E050AK evaluation board
VNQ5E050AK evaluation board Data brief production data Features Parameter Symbol Value Unit Max supply voltage V CC 41 V Operating voltage range V CC 4.5 to 28 V Max On-State resistance R ON 50 mω Current
AD5750 EVALUATION BOARD
Preliminary Technical Data FEATURES Current Output Ranges: 4 20mA, 0 20mA, 0 24mA, ±20ma, ±24ma Voltage Output Ranges: 0-5V, 0-10V, ±5V, ±10V, 20% over-range Flexible Serial Digital Interface On-Chip Output
P/N ( )
EQUIPMENT INSTALLATION MANUAL For the GDC55 ARINC 49 DATA CONVERTER P/N 1089-4000-01-001( ) DAC International 670 McNeil Drive Austin, TX 7879 Copyright 008, DAC International. All rights reserved. Page
AEC-Q100F Qualification Results Summary
AEC-Q100F Qualification Summary Objective: To qualify NPI 9S08DZ60 M74K in a 64 LQFP Package Freescale PN: 9S08DZ60 Customer Name(s): Multiple Part Name: Longhorn PN(s): Technology: 0.25um Embedded Flash
Contactless Single-trip Ticket ICs MF0 IC U10 01 MF0 IC U11 01 Specification bumped sawn wafer on UV-tape
INTEGRATED CIRCUITS ADDENDUM Contactless Single-trip Ticket ICs MF0 IC U10 01 Specification bumped sawn wafer on UV-tape Product Specification Revision 3.0 PUBLIC August 2004 Philips Semiconductors CONTENTS
Application Note for Molded Plastic QFN Packages. GaAs Monolithic Packaged Microwave IC. 1. General considerations on plastic molded packages
Application Note for Molded Plastic QFN Packages GaAs Monolithic Packaged Microwave IC 1. General considerations on plastic molded packages Surface Mount Device type packages (SMD*) for microwave applications
LTCC (Low Temperature Co-fired Ceramic)
LTCC (Low Temperature Co-fired Ceramic) Design Guide Line. 381, Wonchun-Dong, Paldal-Ku, Suwon City, Kyung Ki-Do, Republic of Korea Tel : 82-31-217-2500 (Ext. 470) Fax : 82-31-217-7316 Homepage : http://www.pilkorcnd.co.kr
onlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
H-CAD MD system - Block Diagram
ENG. H-CAD MD system - Block Diagram Automatic Wire Harness MFG Process Design Tool through systematic conversion from Car maker s original drawing/spec to manufacturer s workable drawing/list < W/H DR