Installation & Operations Manual
|
|
- Flora George
- 5 years ago
- Views:
Transcription
1 Installation & Operations Manual VoIP Command Center Made in the USA 3 Year Warranty N56W24720 N. Corporate Circle Sussex, WI RP8500PBXVOIPG Ver. 3 10/18
2 Thank you for purchasing RATH s VoIP Command Center. We are the largest Emergency Phone Manufacturer in North America and have been in business for over 35 years. We take great pride in our products, service, and support. Our Emergency Phones are of the highest quality. Our experienced customer support teams are available to remotely assist with site preparation, installation, and maintenance. It is our sincere hope that your experience with us has and will continue to surpass your expectations. Thank you for your business, RATH Team Table of Contents Items Needed Installation Steps Typical System Layout Page 4 Distribution Module Wiring Page 5 Connecting Phones to Distribution Module... Page 7 VoIP Card Programming Setting Date and Time Phone Programming Command Center Operating Instructions.... Page 3 Page 3 Page 7 Page 10 Page 10 Page 11 Troubleshooting Page 12 N56W24720 N. Corporate Circle Sussex, WI
3 Items Needed Included Command Center phone with phone line cable Distribution Module System wiring (pigtail cables, power cord, ethernet cable for programming Distribution Module) Cabinet (wall mount) or Stand (desk mount) Not Included Router Network Switch (POE+ if using with POE phones) Windows Laptop Analog phone for testing Multimeter Installation Steps Step 1 Mount the Distribution Module and Power Supply with battery back up in an appropriate location, installing the cabinet for wall mount units or the stand for desk mount units accordingly. Then remove the knock outs (if applicable). The recommended location to mount the Distribution Module and Power Supply is in a network closet or machine room. Mount the Command Center according to the owner s specifications. Follow the diagram below for attaching the extender and foot stand to the back of the Command Center phone as needed. Step 2 For 1-48 zone systems, remove the screws on the back of the Distribution Module and remove the cover to expose the internal RJ45 interface connections. Page 3
4 SOLID LIGHT: CALLING BLINKING LIGHT: RECEIVED SOLID LIGHT: CALLING BLINKING LIGHT: RECEIVED SOLID LIGHT: CALLING BLINKING LIGHT: RECEIVED SOLID LIGHT: CALLING BLINKING LIGHT: RECEIVED Typical System Layout Rath IP Phone HELP PHONE Cat 5E or Cat 6E cabling Note: Local and/or state codes may have additional cabling requirements. Please check with your local AHJ. Base Station HELP PHONE Two Wire Connection HELP PHONE Distribution Module Connection from WAN Port on VoIP Card to Network Components Ethernet from CPU Card to Network Components Network Components Router HELP PHONE Power Supply with UPS Network Switch 120v Power Source Maximum wire run between connected devices is 300 Page 4
5 Distribution Module Wiring Step 3 Card Wiring The maximum cable length to the Comand Center is 6200 for 22AWG and 3600 for 24AWG cable Local and/or state codes may have additional cabling requirements. Check with your local AHJ. VoIP Call Boxes are not hardwired to the Distribution Module Option Zone VoIP System: Plug the supplied RJ45 pigtail cables into the RH45 interface connections following the wiring chart and pin-out color scheme below Refer to the top of the cards to see what type of RJ45 interface and number of extensions The same pin-out color scheme should be used for the primary card and for all additional cards The system uses T568-A for pin-out wiring On top of each card there is a table indicating RJ45 interface usage: SLT is the port used for connecting hardwired Call Boxes DKP is the port used for connecting Command Center phone(s) TWT is the port used for outside Telco lines The first card installed will always be: Interface 1 (01-04): connection for 4 hardwired Call Boxes (SLT) Interface 2 (05-06): connection for 2 Telco lines (TWT) Interface 3 (07-08): connection for up to 2 Command Center phones (DKP) The VoIP interface card is always intalled in slot 5 and will have the WAN port connected to the network components via an ethernet cable 2004 PHONE SLT TWT DKP S01-S04 S05-S06 S07-S08 TELCO LINE 1 COMMAND CENTER PHONE 2 PHONE TELCO LINE 2 COMMAND CENTER 2 PHONE 3 Note: Do not use the green and brown pairs Page 5
6 Option Zone VoIP System: Plug the supplied RJ45 pigtail cables into the RJ45 interface connections following the wiring chart and pin-out color scheme below Refer to the top of the cards to see what type of RJ45 interface and number of extensions The same pin-out color scheme should be used for the primary card and for all additional cards. The system uses T568-A for pin-out wiring On top of each card there is a table indicating RJ45 interface usage: S_ are the ports used for connecting hardwired Call Boxes TD(1-2)(3-4) with a dot under the D is the port used for connecting Command Center phone(s) TD(1-2)(3-4) with a dot under the T is the port used for outside Telco lines The first card installed will always be: Interface 1 (S01-S04): connection for 4 hardwired emergency phones Interface 2 (S05-S08): connection for 4 hardwired emergency phones Interface 3 (S09-S12): connection for 4 hardwired emergency phones Interface 4 (S13-S16): connection for 4 hardwired emergency phones Interface 5 (D1-2): connection for up to 2 Command Center phones Interface 6 (T1-2): connection for up to 2 outside Telco lines Connect the WAN port on the control card to the network components via an ethernet cable S01-S04 S05-S08 S09-S12 S13-S16 D1-2 T1-2 COMMAND CENTER 1 TELCO LINE PHONE 2 PHONE COMMAND CENTER 2 PHONE 4 PHONE PHONE 6 PHONE PHONE 8 PHONE PHONE 10 PHONE PHONE 12 PHONE PHONE 14 PHONE 13 TELCO LINE 2 PHONE 16 PHONE 15 Note: Do not use the green and brown pairs Page 6
7 Connecting Phones to Distribution Module Step 4 Connect the phones Note: The maximum wire run between network devices is 300 Standard Setup IP Phones: Connect the POE+ Network Switch to the POE port on the phone via an ethernet cable Elevator Phones ONLY Analog Phones with IP Interface: Connect the Network Switch to a RATH IP Interface via an ethernet cable Connect the RATH IP Interface to the phone via a phone line cable Cat 5E is the minimum standard cable for the system. Check with your local AHJ to ensure you are in compliance with state and/or local codes. Step 5 Apply AC power to the Distribution Module by connecting the supplied power cable from the Distribution Module to the RATH model RP Power Supply. Step 6 Turn on the Power Supply Step 7 Power on the Distribution Module VoIP Card Programming Step 8 Program the VoIP Card Note: If network information is provided to RATH at the time of purchase, then no additional information needs to be entered for the VoIP card. If network information is NOT provided, the following needs to be performed: 1. Connect the ethernet port of the Distribution Module to your Windows laptop using an ethernet cable a. For 1-48 zone systems, the ethernet port is located on the back of the housing b. For zone systems, the ethernet port is the one closest to the power switch 2. Change the IP address of the laptop s network interface card a. Navigate to Control Panel b. Click on Network and Internet c. Click on Network and Sharing Center d. Click on Change Adapter Settings e. Right click on Ethernet Page 7
8 f. Click on Properties g. Double click on Internet Protocol Version 4 h. Click Use the Following IP Address i. Change IP to the default IP address range of the Distribution Module (recommend using ) j. Change Subnet Mask (default is ) 3. Turn off the wireless card on the laptop (if applicable) 4. Log in to the Distribution Module a. Enter into the web browser (Google Chrome is recommended) b. Log in as System Engineer and enter Password: Rath7284! 5. Enter VoIP information a. Navigate to VoIP Configuration in left side menu b. Click the drop-down arrow, more menu options should appear c. Click VoIP Port Parameters 6. Enter Server Information a. Navigate to WAN Port (IPV4 Settings) b. Enter the assigned network IP address into the IP Address line c. Enter the Subnet Mask of your network into the Subnet Mask line d. Enter the Router IP address into the Default Gateway line 7. Click Submit Page 8
9 8. Setting up SIP Extensions a. Click SIP Extension Settings b. VOIP Port 1 should be selected c. Enter the desired name in the Name line d. Enter the extension in the SIP ID line i. This must be a number above 4000 to avoid issues within the system ii. Example: 1. Extension 1 = Extension 2 = 4002 e. Enter the desired password in the Password line i. Be sure to follow the password requirements displayed on the screen f. Click Submit Page 9
10 Setting the Date and Time Step 9 All Distribution Module programming will be done from the Command Center handset 1. To enter Program Mode a. Dial 1#91 b. Enter Password: To program the time zone a. Dial 1002 followed by the appropriate time zone code Eastern = 111 Central = 112 Mountain = 113 Pacific = To program the date (month-day-year format) a. Dial 1001 followed by the date Example: for February 15, 2011 b. Touch the GREEN button in the middle of the phone when finished 4. To program the time (military time including hour-minute-second) a. Dial 1003 followed by the time Example: for 2:30pm 5. To exit Program Mode dial 00 followed by the GREEN button Phone Programming Step 10 The VoIP Call Box is preprogrammed for Memory Location 1 to dial 3931 in order to call the Command Center first. Optionally, the VoIP Call Box can be programmed to dial an outside number if the call is not answered at the Command Center. To do this, follow these instructions at the Command Center: 1. Press the speaker phone button 2. Dial 1, 3, 4 3. Dial 9, then the external number 4. Press #, * 5. To exit Program Mode dial 00 followed by the GREEN button Step 11 Program the location message (optional) 1. Set the message frequency to option 3 2. In the message recording, state the location of the call box followed by To begin two-way communication press * Page 10
11 Command Center Operating Instructions Indicator Status: 1. Red LED Light - Incoming Call or Connected to Outside Party 2. Blue LED Light - Active Call 3. Blue LED Flashing - Call on Hold Answering Call at Command Center: 1. Lift handset to answer the first incoming call 2. Press Call Answer Button 1 3. If multiple calls are coming in, press the subsequent Call Answer Buttons 2, 3, etc. (this will place previous calls on hold) 4. To rejoin a call on hold, press the flashing blue LED next to the desired location Disconnect Calls: Option 1 1. Hang up the handset to disconnect an active call Option 2 1. Select the flashing blue LED to take the call off hold 2. Hang up the handset to disconnect the call Note: Each call must be disconnected individually Calling a Location: 1. Pick up the handset and dial the extension Calling a Location: 1. Pick up the handset and dial the extension Joining a Call Already in Progress: 1. Pick up the handset and press the red LED, then the number 5 button on the keypad Call the Last Location that Dialed Out: 1. Pick up the handset and dial 1092 Page 11
12 Troubleshooting Problem Command Center will not power on Emergency phones will not call out Phone will make internal calls, but not external calls Insufficient volume on call boxes Lights continuously blink on button for call box Lights periodically blink on Command Center Possible Cause & Solutions Check wires for voltage. It should be 28VDC. If no voltage is detected, confirm you are connected to the DKP interface on the Distribution Module. If you have 48VDC, you are incorrectly connected to an SLT interface. Check wires for voltage. It should be 48VDC. If no voltage is detected, confirm you are connected to the SLT interface on the Distribution Module. Note: some SLT interface only use the blue and orange pairs. If you have 28VDC, you are incorrectly connected to the DKP interface. Make sure you dial any access digit that may be required to dial out of your building Check that the phone line is connected to the correct port on the Distribution Module Verify the phone line by making sure it has 48-52VDC on the line and use an analog phone to verify you are able to call in and out. To adjust the volume on SmartPhones, turn the VR1 potentiometer. The phone is not properly hung up. Lift the Command Center handset, select the blinking light, then hang up the handset. This indicates the phone is doing a phone line check. This is a normal function of the system and no action is needed. To disable this function, refer to the SmartPhone Programming Guide Page 12
2400 Series. Installation & Operations Manual. 42 Central Drive Farmingdale, NY
2400 Series Installation & Operations Manual Made in the USA 42 Central Drive Farmingdale, NY 11735 631-777-5500 800-666-4800 www.alphacommunications.com AWD266 Rev. 07/18 Items Needed Included Command
More informationInstallation & Operations Manual 2100 Series VOIP Phone
Installation & Operations Manual 2100 Series VOIP Phone N56W24720 N. Corporate Circle Sussex, WI 53089 800-451-1460 www.rathcommunications.com RP8500SIP Ver. 6 09/16 2 Year Warranty Thank you for purchasing
More informationUltra-elegant Gigabit IP Phone SIP-T48S
Ultra-elegant Gigabit IP Phone SIP-T48S Quick Start Guide (V8220) wwwyealinkcom Applies to firmware version 6682010 or later Packaging Contents The following items are included in your package If you find
More informationCisco IP Phones. Quick Start Guide SPA303. Tel Woodley Ave., Van Nuys, CA USA
Cisco IP Phones SPA303 Quick Start Guide 2 SPA303 3 Welcome Thank you for choosing the Cisco Small Business IP phone. This guide describes how to install your phone and how to perform some basic tasks.
More informationCisco Model SPA 303 Quick Start Guide
Cisco Model SPA 303 Quick Start Guide Welcome Thank you for choosing the Cisco Small Business IP phone. This guide describes how to install your phone and how to perform some basic tasks. 1 Installing
More informationUltra-elegant Gigabit IP Phone
Ultra-elegant Gigabit IP Phone SIP-T48G Quick Start Guide(V80.95) www.usaphone.com 856.761.1000 Applies to firmware version 35.80.0.80 or later. Packaging Contents The following items are included in your
More informationUltra-elegant Gigabit IP Phone SIP-T48S
Ultra-elegant Gigabit IP Phone SIP-T48S Quick Start Guide (V8120) wwwyealinkcom Applies to firmware version 6681015 or later Packaging Contents The following items are included in your package If you find
More informationUltra-elegant Gigabit IP Phone
Ultra-elegant Gigabit IP Phone SIP-T48G Quick Start Guide (V8060) wwwyealinkcom Applies to firmware version 3580060 or later Packaging Contents The following items are included in your package If you find
More informationInternet Telephony Gateway VGW-402 / VGW-400FS / VGW-400FO. Quick Installation Guide
Internet Telephony Gateway VGW-402 / VGW-400FS / VGW-400FO Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Hardware Installation... 4 2.1 Safety Instructions... 4 2.2 Physical Introduction...
More informationInstallation & Operations Manual
Installation & Operations Manual Emergency Solar Tower Phone 2100-TSL Landline Solar Tower 2100-TSC Cellular Solar Tower 2100-TS9 900 MHz Solar Tower 2100-TST 2-Way Radio Solar Tower 2100-TSV VoIP Solar
More informationHOUSING DEVICES, INC. HDI ADA - ARCU. Installation & Operations Manual. Made in the USA
HOUSING DEVICES, INC. ADA - ARCU Installation & Operations Manual Made in the USA ADA - ARCU 5 & 10 Pre-Installation Requirements: For each ADA-1000 in the elevator you must run a twisted, shielded, 22
More informationCisco Model SPA 525G Quick Start Guide
Cisco Model SPA 525G Quick Start Guide Welcome Thank you for choosing the Cisco Small Business IP phone. This guide describes how to install your phone and how to perform some basic tasks. 1 Installing
More informationQuick Start Guide. Mounting the Essential Plus and Elite
Quick Start Guide Congratulations on purchasing an Essential Plus or Elite access control system. This Quick Start Guide provides simple instructions on how to get the system up and running. For more detailed
More informationModel SPA 504G Quick Start Guide
mydatavo Model SPA 504G Quick Start Guide Welcome Thank you for choosing Datavo as your business solutions provider. This guide describes how to install your phone and how to perform some basic tasks.
More informationMediaPack 1xx Analog VoIP Gateway
MediaPack 1xx Analog VoIP Gateway Quick Setup Guide Welcome Congratulations on purchasing your AudioCodes MediaPack 1xx (MP-1xx) Analog Voice-over-IP (VoIP) Media Gateway (hereafter, referred to as device)!
More informationUltra-elegant Gigabit IP Phone
Ultra-elegant Gigabit IP Phone SIP-T42G Quick Start Guide(V73.40) www.yealink.com Applies to firmware version 29.73.0.40 or later. EHS36 Packaging Contents The following items are included in your package.
More informationCisco 504G, 514G, 508G, and 303G Initial Setup
Cisco 504G, 514G, 508G, and 303G Initial Setup 1 Handset 2 Message Waiting Indicator 3 LCD Screen 4 Line keys 5 Softkey buttons 6 Navigation button 7 Messages button 8 Hold button 9 Setup button 10 Mute
More informationQuick Start Guide. Cisco SPA232D Mobility Enhanced ATA
Quick Start Guide Cisco SPA232D Mobility Enhanced ATA Package Contents Analog Telephone Adapter Ethernet Cable Phone Cable Power Adapter Quick Start Guide Product CD-ROM Welcome Thank you for choosing
More informationCisco Unified IP Phone Installation
Phone Installation Overview, page 1 Before You Begin, page 1 Cisco Unified IP Phones 7906G and 7911G Components, page 2 Install Cisco Unified IP Phones, page 6 Mount Phone on Wall, page 11 Phone Startup
More informationPHONE APPLICATION GUIDE
TX3 Series EMERGENCY PHONE APPLICATION GUIDE Copyright November 2015 Mircom Inc. All rights reserved. Mircom 25 Interchange Way Vaughan, Ontario L4K 5W3 905.660.4655 Fax:905.660.4113 Version 1 TX3 Emergency
More informationInstallation & Configuration Guide
Installation & Configuration Guide Rel. 2.0 Service Pack 1 Rel. 2.0 Service Pack 1 Vertical Communications, Inc. reserves the right to revise this publication and to make changes in content without notice.
More informationUltra-elegant Gigabit IP Phone SIP-T46S
Ultra-elegant Gigabit IP Phone SIP-T46S Quick Start Guide(V81.20) www.yealink.com Applies to firmware version 66.81.0.15 or later. Packaging Contents The following items are included in your package. If
More informationAC1200M/MS. User Manual
AC1200M/MS User Manual Table of Contents User Manual... 1 1 Preface... 1 2 LED Indicators and Connectors... 1 2.1 LED Indicators... 1 2.2 Hardware Installation... 2 3 Voice Prompt (AC1200MS)... 2 4 User
More informationTeletics Feature Server RM Installation and User Guide
Teletics Feature Server RM Installation and User Guide Rev 1.01 Feb 21, 2012 Teletics Feature Server RM Installation and User Guide Rev 1.01 Feb 21, 2012 Page 1 Contents Introduction... 3 Background...
More informationHSPA+ WiFi Router with Voice
NETCOMM LIBERTY SERIES HSPA+ WiFi Router with Voice 3G22WV Quick Start Guide This router has been designed to be placed on a desktop. All of the cables exit from the rear for better organization. The LED
More informationGarage Door Control Button. What s inside: Quickstart Guide Model No. WGO x Garage Door Control Button
Add-On Device Quickstart Guide 1 Garage Door Control Button Quickstart Guide Model No. WGO2001 What s inside: 1x Garage Door Control Button 1x Power Adapter 2x U-fork Wires Mounting Accessories and Double-sided
More informationUltra-elegant Gigabit IP Phone
Ultra-elegant Gigabit IP Phone SIP VP-T49G Quick Start Guide (V80100) wwwyealinkcom Applies to firmware version 5180075 or later Packaging Contents The following items are included in your package If you
More informationCisco Small Business Model SPA 504g
Cisco Small Business Model SPA 504g User Guide Version 1 Table of Contents Getting Started... 1 About This Document... 1 Organization... 1 Overview of the Cisco Small Business IP Phones... 3 Understanding
More information9417CW Installation and User Guide
9417CW Installation and User Guide 9417CW Telephone Important Tips Wait for at least two rings to allow the phone to identify a caller and display the caller s name and/or number. You will have to subscribe
More informationThe L-1 Series Emergency Phone
Product Manual Product Number: L1 SERIES Line Powered ADA Emergency s The L-1 Series Emergency Line Powered ADA Emergency s A17.1 2013 & ADA Compliant Solutions Emergency ADA for Elevators, Area of Rescue,
More informationGetting to know your V-Portal
Getting to know your V-Portal Ever hear the term user friendly? Well, the Vonage V-Portal defines the term. From the LCD Display messages to the color coded ports on the rear panel, the V-Portal is friendly
More informationSetup & Information Guide Zultys 37G VoIP Phones
Setup & Information Guide Zultys 37G VoIP Phones Contents Phone Installation... 3 Prerequisites... 3 Assembling Your Phone... 3 Connecting Your Phone... 4 First Phone Setup... 5 Understanding Your Phone...
More informationInstallation & Configuration Guide
Installation & Configuration Guide Release 2.0 Release 2.0 Vertical Communications, Inc. reserves the right to revise this publication and to make changes in content without notice. 2010 by Vertical Communications,
More informationIPS-2101h. Quick Installation Guide V1.0
IPS-2101h Quick Installation Guide V1.0 ArtDio IPS-2101h VoIP Gateway Package content: One IPS-2101h VoIP Gateway One Power Adaptor One RJ 45 Ethernet Cable One RJ-11 Telephone Cable Quick Installation
More information-PAGE INTENTIONALLY LEFT BLANK-
Allworx Phone Guide -PAGE INTENTIONALLY LEFT BLANK- Table of Contents 1 GETTING STARTED...1 1.1 WHAT IS IN THE BOX?...1 1.2 CONNECTING THE PHONE...1 2 ADJUSTING YOUR PHONE...2 2.1 ADJUST THE ANGLE OF THE
More informationDVG-6008S FXO VoIP Router
This product can be set up using Internet Explorer or Netscape Navigator, 6.x or above, with Javascript enabled DVG-6008S FXO VoIP Router Before You Begin You must have at least the following: A subscription
More informationUltra-elegant Gigabit IP Phone
Ultra-elegant Gigabit IP Phone SIP VP-T49G Quick Start Guide (V225) wwwyealinkcom Applies to firmware version 512205 or later Packaging Contents The following items are included in your package If you
More informationIP Speaker System. Users Guide
ii3-ess IP Speaker System Users Guide ESS User Manual This page intentionally left blank 2 ESS User Manual Table of Contents Overview... 1 Specifications... 2 25/70 Volt Lines... 3 Speaker Configurations...
More informationQuick Installation Guide
Quick Installation Guide DL-200 Cellular Data logger V1.2_201610 TABLE OF CONTENTS CHAPTER 1 INTRODUCTION... 4 1.1 CONTENTS LIST... 5 1.2 HARDWARE INSTALLATION... 6 1.2.1 WARNING... 6 1.2.2 SYSTEM REQUIREMENTS...
More informationUltra-elegant Gigabit IP Phone
Ultra-elegant Gigabit IP Phone SIP VP-T49G Quick Start Guide (V8011) wwwyealinkcom Applies to firmware version 5180010 or later Packaging Contents The following items are included in your package If you
More informationCisco Small Business Model SPA 303g
Cisco Small Business Model SPA 303g User Guide Version 1 Table of Contents Getting Started... 6 About This Document... 6 Organization... 7 Overview of the Cisco Small Business 300 Series IP Phones... 8
More informationSI IP Door Station. Quick Start Guide
SI-8000 IP Door Station Quick Start Guide Table of Contents Introduction Dimensions... 1 Basic Network Connections... 2 RJ-45 Pinout... 2 Pre-install Volume Adjustment... 2 1. Detect & Verify Network Settings...
More informationVoiceLine Getting Started Guide InnoMedia MTA R
VoiceLine Getting Started Guide InnoMedia MTA 3328-2R June 2005 IMPORTANT NOTICE CONCERNING EMERGENCY 911 SERVICES Your service provider, not the manufacturer of the equipment, is responsible for the provision
More informationAnalog Telephone Adapter Setup for Q-SYS Softphone
Analog Telephone Adapter Setup for Q-SYS Softphone This document applies to this Cisco device: SPA232D Introduction This document covers the use of the SPA232D in the role of analog telephone adapter (ATA)
More informationVoiceLine Calling Features
VoiceLine Calling Features For a complete list of features and codes, refer to the VoiceLine User s Guide. VOICELINE CALLING FEATURES Feature Call Waiting Caller ID 3-Way Calling Description Once you hear
More informationAll Rights Reserved. February 2005 Version 1.1
All Rights Reserved The use, disclosure, modification, transfer or transmittal of this work for any purpose, in any form, or by any means, without the written permission from Net2Phone is strictly forbidden.
More informationvideo phone Quick Start Guide
600410 IRIS V video phone Quick Start Guide Getting Started 1 3 2 4 Check to make sure that your box contains each of the items pictured above: 1 IRIS V video phone 2 Handset 3 Ethernet cable (RJ-45) 4
More informationAristel AN4004 GSM FIXED WIRELESS TERMINAL MANUAL V3.1. This manual contains important information. Please read before using the equipment.
Aristel AN4004 GSM FIXED WIRELESS TERMINAL MANUAL V3.1 This manual contains important information. Please read before using the equipment. Contents 3 Function Description:...4 4 Operation Guide:...4 4.1
More informationDeploy a Customer Site
Local Administration, on page 1 Run Port Check Tool, on page 4, on page 4 Add Cisco Wireless IP Phone 8821 to the Wireless LAN, on page 6 Provision the Phone, on page 7 Local Administration You can connect
More informationAudioCodes C450HD IP Phone with Microsoft Skype for Business
AudioCodes C450HD IP Phone with Microsoft Skype for Business Quick Guide 1. Before Installing Congratulations on purchasing your AudioCodes C450HD IP Phone! Note: Skype for Business (SfB) also applies
More informationEquipment Installation Guide
Introduction Set Up AT&T Business Ready and Assign Users Take Inventory and Pack Contents Installation Overview Additional Resources Introduction This guide shows you how to install your new AT&T Business
More informationHotel Phone - H3 & H5 Quick Installation Guide
Hotel Phone - H3 & H5 Quick Installation Guide Connection methods Please connect power adapter, network, PC, and handset to the corresponding ports as described in below picture. 2 / 6 1 Introduction to
More informationCisco 8841 & 8851 IP Phone Quick Reference V 1.2
Cisco 8841 & 8851 IP Phone Quick Reference V 1.2 1. Handset Light Strip 2. Line / Session Buttons 3. Phone Screen 4. Soft Key Buttons* 5. Navigation and Select Button 6. Release Button 7. Hold / Resume
More informationTouch Panel Controller for CONVERGE Pro 2. With Built-in Dialers for VoIP/Telco & Skype for Business User Manual
Touch Panel Controller for CONVERGE Pro 2 With Built-in Dialers for VoIP/Telco & Skype for Business Notices Technical Support Telephone 801.974.3760 Fax 1.801.303.5711 Email Web tech.support@clearone.com
More informationGIGABIT COLOR IP PHONE
GIGABIT COLOR IP PHONE USER GUIDE UC842 Version:1.0.3.59 Nanjing Hanlong Technology Co., Ltd 86-25-84608050 support@hanlongtek.com Notices Information Notices Information Copyright Copyright 2005-2013
More informationEnterprise IP Phone SIP-T19 E2 & T19P E2
Enterprise IP Phone SIP-T19 E2 & T19P E2 Quick Start Guide(V80.10) www.yealink.com Applies to firmware version 53.80.0.10 or later. Packaging Contents The following items are included in your package.
More informationHome automation hub installation and setup guide
installation and setup guide is placed in a closed off area, the wireless signal strength may be compromised. Note: To prevent radio frequency (RF) interference, we recommend that you place the away from
More informationWIRELESS ROUTER N150. User Manual. F9K1009v1 8820zb01125 Rev.B00
WIRELESS ROUTER N150 User Manual F9K1009v1 8820zb01125 Rev.B00 TABLE OF CONTENTS Getting Started... 1 What s in the Box...1 Initial Setup...1 How to Set It UP...2 Adding Computers to Your Network...3 Manually
More informationFPA-1000-V2 Network Cards FPE-1000-NE, FPE-1000-NF, and FPE-1000-NW
FPA-1000-V2 Network Cards FPE-1000-NE, FPE-1000-NF, and FPE-1000-NW en Installation manual FPA-1000-V2 Network Cards Table of contents en 3 Table of contents 1 General Information 4 1.1 Safety 4 1.2 Network
More informationIMPORTANT NOTICE CONCERNING EMERGENCY 911 SERVICES
IMPORTANT NOTICE CONCERNING EMERGENCY 911 SERVICES Your service provider, not the manufacturer of the equipment, is responsible for the provision of phone services through this equipment. Any services
More informationAccess Control System Document Number: , Rev. D. Installation Guide. Essential Essential Plus Elite 36 Elite 64
Essential Essential Plus Elite 36 Elite 64 Access Control System Document Number: 620-100239, Rev. D Installation Guide USA & Canada (800) 421-1587 & (800) 392-0123 (760) 438-7000 - Toll Free FAX (800)
More information2757 VoIP Phone Users Guide
2757 VoIP Phone Users Guide Rev. 1.0 Table of Contents 1 Introduction... 5 1.1 Package Contents... 5 1.2 Features... 5 1.3 Basic Setup... 6 2 Network Setup... 8 2.1 Static IP Address... 8 2-2 PPPoE...11
More informationBiPAC 6404VGP R3. VoIP/ g Broadband Firewall Router. Quick Start Guide
BiPAC 6404VGP R3 VoIP/ 802.11g Broadband Firewall Router Quick Start Guide Quick Start Guide Billion BiPAC 6404VGP R3 VoIP/ 802.11g Broadband Firewall Router PLEASE READ THE QUICK START GUIDE AND FOLLOW
More informationLifesize Icon Installation Guide October 2016
Lifesize Icon Installation Guide October 2016 Lifesize Icon 400 Lifesize Icon 450 Lifesize Icon 600 Lifesize Icon 800 Preparing for Installation As you prepare to install your Lifesize video system, consider
More informationSolution. Installation Manual. Tone & Visual Nurse Call System. N56W24720 N. Corporate Circle Sussex, WI
Solution Installation Manual Tone & Visual Nurse Call System Made in the USA 3 Year Warranty N56W24720 N. Corporate Circle Sussex, WI 53089 800-451-1460 www.rathnursecall.com RP8500SCNC Ver. 1 05/17 Thank
More informationCisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) For Cisco Unified IP Phone 8941 and 8945 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San
More informationPA-SIP PAGING SWITCH. For Technical Assistance call the Manufacturers direct ph AM - 5PM West Coast Pacific Time
PA-SIP PAGING SWITCH For Technical Assistance call the Manufacturers direct ph 800 530 8645 8AM - 5PM West Coast Pacific Time NATCOMM USA LLC Responsible Supplier Code :NC PACKING LIST PA-SIP Paging Switch
More informationVoIP DECT Phone VX-8208-SMBU(S) / VX-8108-SMBU(S)
VoIP DECT Phone VX-8208-SMBU(S) / VX-8108-SMBU(S) QIG v1.0 1 Over View This phone is a full-feature telephone that provides voice communication. Read this QIG carefully to learn how to operate this product
More informationT48S-Skype for Business Edition
T48S-Skype for Business Edition Quick Start Guide (V942) wwwyealinkcom Applies to firmware version 669042 or later Packaging Contents The following items are included in your package If you find anything
More information121000TP227S USER'S MANUAL
121000TP227S USER'S MANUAL TABLE OF CONTENTS FEATURE LIST SAFETY INSTRUCTIONS INTRODUCTION LOCATION OF CONTROLS FUNCTION BUTTONS MENU SETTINGS CALLER ID INFORMATION DISPLAY MESSAGES CALLER ID SYSTEM OPERATION
More informationInnoMedia ipbx-400. Quick Install Guide.
InnoMedia ipbx-400 Quick Install Guide www.innomedia.com Table of Contents Introduction 2 Package Contents 2 Installation 3 Wall-Mounting Instructions 5 Troubleshooting 6 Appendix A. LED Status Summary
More informationSTART HERE. Wireless USB Wired. Do you want to connect the printer to a wireless network? Use the Wireless Setup and Connection.
START HERE If you answer yes to any of these questions, turn to the section indicated for Setup and Connection instructions. Do you want to connect the printer to a wireless network? Use the Wireless Setup
More informationAastra 480i VoIP Telephone User s Guide
Aastra 480i VoIP Telephone User s Guide Initial Start-Up/Restart The first time you plug in your phone and every time you restart your phone it automatically goes through the start-up process. After displaying
More informationUser Guide: Polycom SoundPoint IP335 Phone
User Guide: Polycom SoundPoint IP335 Phone User Guide Contents: User Guide Contents:... 2 IP335 Button Diagram... 3 Telephone Feature Overview... 4 IP335 Features... 4 Reading the Display... 4 How to Use
More informationPhone Information. IP2061 Quick Reference Guide. ICON Voice Networks REV 1.0. ICON Voice Networks
Phone Information Extension Number: Passcode / Voice Mail Access Code: IP Address: MAC Address: Serial Number: REV 1.0 IP2061 Quick Reference Guide ICON Voice Networks 8001 Jetstar Drive Irving, TX 75063
More informationA20 LTE Quick Start Guide
A20 LTE Quick Start Guide Version:1.0 2018-8-20 Content 1 Packaging... 1 2 Installation... 3 3 Power up... 10 4 Connetion... 10 5 Quick configuration... 119 2 1. Packaging In the packaging box, we can
More informationQuick Installation Guide DVG-N5412SP VoIP Wireless Router
Quick Installation Guide DVG-N5412SP VoIP Wireless Router Check Your Package Contents DVG-N5412SP VoIP Router Phone Cord X 2 Ether Cable (CAT5 UTP) 12VDC, 2A Power Adapter Using a power adapter with a
More informationLGate 120 Installation Guide - Appendix
LGate 120 Installation Guide - Appendix This guide contains information on RS485 and Ethernet connections to the LGate 120 3GY Version 1.1 Table of Contents Important Product Information 3 The LGate 120
More informationElapsed Timer Control Panel
Installation Manual V6.2 Elapsed Timer Control Panel Current as of August 2017 The Sapling Company, Inc. Elapsed Timer Control Panel Table of Contents Table of Contents 2 Important Safety Instructions
More informationInstallation Instructions
LIGHTRULES APPLIANCE (LRA) Installation Instructions TABLE OF CONTENTS: OVERVIEW Networked Installation Example 2 LightRules Installation Overview 2 Networked vs. Standalone Installations NEW INSTALLING
More informationPolycom KIRK IP Interface Card - User Guide
Polycom KIRK IP Interface Card - User Guide 1. Introduction This guide helps you setting up the KIRK Wireless Server 1500 with IP Interface Card on a Cisco CallManager. Please refer to your CallManager
More informationCisco SPA50x User Manual
Cisco SPA50x User Manual Table of Contents: Phone operation 2 Claricom System Star Codes 65 Claricom User Voicemail 66 USER GUIDE Cisco Small Business Cisco SPA50X and SPA51X SIP IP Phones Models SPA501G,
More informationBiPAC 7800VDP(O)X. Dual-band Wireless-N VoIP ADSL2+ (VPN) Router. Quick Start Guide
BiPAC 7800VDP(O)X Dual-band Wireless-N VoIP ADSL2+ (VPN) Router Quick Start Guide Billion BiPAC 7800VDP(O)X Dual-band Wireless-N VoIP ADSL2+ (VPN) Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE
More informationDVG-2001S VoIP Terminal Adapter
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVG-2001S VoIP Terminal Adapter Before You Begin 1. If you purchased this VoIP Terminal
More informationFAQs on ETERNITY NE. Ans. ETERNITY NE is an all Integrated IP-PBX with seamless mobility that caters to the communication
FAQs on ETERNITY NE Q1. What is ETERNITY NE? Ans. ETERNITY NE is an all Integrated IP-PBX with seamless mobility that caters to the communication requirements of small business. ETERNITY NE offers connectivity
More informationTotalPass P600 QUICK GUIDE
TotalPass P600 QUICK START GUIDE 1 UNPACK THE BOX Thank you for choosing Icon Time, we appreciate your business. Below are the contents included with your TotalPass P600 time clock. If anything is missing,
More informationOwning your dialtone The signature ooma dialtone is music to your ears. It means you have unlimited calling within the US with no monthly fees.
Quick Start guide GET READY TO SAY HELLO TO: Everything you need to get started is inside this box, and everything you need to know about installation is in your hands. Don t be fooled by the size of this
More informationThe Indoor+Outdoor Security Starter Kit Quickstart Guide
What s inside: The Indoor+Outdoor Security Starter Kit Quickstart Guide 1x Security Shuttle 1x Mini Cube HD camera 1x Mini outdoor Full HD camera 2x Door + Window sensors 1x Keychain remote 2x Power adapters
More informationSmart Media Phone. Quick Start Guide (V83.5) SIP-T58V & SIP-T58A. SIP-T58V. Applies to firmware version or later.
Smart Media Phone SIP-T58V & SIP-T58A SIP-T58V Quick Start Guide (V835) wwwyealinkcom Applies to firmware version 588301 or later Package Contents The following items are included in your package If you
More informationBiPAC 7404V Series. VoIP/ (802.11g) ADSL2+ (VPN) Firewall Router. Quick Start Guide
BiPAC 7404V Series VoIP/ (802.11g) ADSL2+ (VPN) Firewall Router Quick Start Guide Billion BiPAC 7404V Series ADSL2+ Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK
More informationModel No. KX-TGP500 B08. Model No. KX-TGP550
User Guide SIP Cordless Phone Model No. KX-TGP500 B08 Model No. KX-TGP550 T08 Model shown is KX-TGP500. Model shown is KX-TGP550. Thank you for purchasing a Panasonic product. You can configure some of
More informationIndustrial IP67-rated 4-Port 10/100/1000T at PoE + 2-Port 10/100/1000T. M12 Managed Ethernet Switch. (-40~75 degrees C) IGS-604HPT-M12
Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T M12 Managed Ethernet Switch (-40~75 degrees C) IGS-604HPT-M12 Quick Installation Guide Table of Contents 1. Package Contents...
More informationDI-808HV 8-Port Broadband VPN Router
This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DI-808HV 8-Port Broadband VPN Router 1. Thank you for purchasing this Router to share your
More informationTA Series Analog VoIP Gateway Installation Guide
TA Series Analog VoIP Gateway Installation Guide Version 1.5 Date: November 17, 2016 Yeastar Information Technology Co. Ltd. Contents About TA Series Analog VoIP Gateway... 3 1. Preparation before Installation...
More informationGRANDSTREAM HT802 ANALOG TELEPHONE ADAPTER (ATA) SELF-INSTALLATION AND CONFIGURATION GUIDE DELIVERED OVER-THE-TOP (OTT)
GRANDSTREAM HT802 ANALOG TELEPHONE ADAPTER (ATA) SELF-INSTALLATION AND CONFIGURATION GUIDE DELIVERED OVER-THE-TOP (OTT) Version 1 April 2019 TABLE OF CONTENTS Getting started... 3 Configuring the ATA...
More informationWelcome to Wi-Power Digital Phone Service
WELCOME to Welcome to Wi-Power Service Thank you for choosing Wi-Power Service! This booklet includes important information to better acquaint yourself with Wi-Power Service. Features: Wi-Power Service
More informationWeatherproof VoIP-telephone. FernTel IP / IP150. Tabletop unit. Short manual. FHF BA /12 Vers. 8
Weatherproof VoIP-telephone FernTel IP / IP150 Tabletop unit Short manual FHF BA 9620-04 07/12 Vers. 8 BA 9620-4 03/11 V8 FernTel IP / IP150 Short manual Brand names are used with no guarantee that they
More informationIpAlarm Module Set Up
Page 1 IpAlarm Module Set Up Note: This device is shipped configured for Ethernet connectivity. To use in this mode, connect the BLUE Jack (marked WAN) to your router and wait for the LEDs to stabilize.
More informationQuick Installation Guide DVG-N5402SP
Quick Installation Guide DVG-N5402SP VoIP Router Check Your Package Contents DVG-N5402SP VoIP Router Ether (CAT5 UTP) Cable 12VDC, 2A Power Adapter Using a power adapter with a different voltage rating
More informationModel No. KX-TGP500 B01. Model No. KX-TGP550
User Guide SIP Cordless Phone Model No. KX-TGP500 B01 Model No. KX-TGP550 T01 Model shown is KX-TGP500. Model shown is KX-TGP550. Thank you for purchasing a Panasonic product. You can configure some of
More information