Android TimeViewer Application

Transcription

1 Android TimeViewer Application Ver. 1.1 User Manual Ref SU-10-A

2

3 Contents Table of Contents Contents... 1 Table Of Figures... 2 Concerning Android TimeViewer... 3 System Requirements... 3 Install... 4 Uninstall... 4 Software Licenses and Liability... 4 First Steps... 4 Android TimeViewer Application... 5 Connect... 6 Troubleshooting connecting the camera... 6 Connection... 7 Live Window Menu Settings 12 About 19 Exit 20 Live 20 Memory 20 SSD 20 Acquire Sequence Memory Window Overview Save Sequence to SSD SSD Window Overview Appendix Customer Service Android TimeViewer Ver. 1.1 Ref SU-10-A Page 1

4 Table of Figures FIGURE 1 : TIMEVIEWER LAUNCHER... 5 FIGURE 2 : SCAN... 7 FIGURE 3 : WI-FI LINK... 8 FIGURE 4 : MANUAL WI-FI PARAMETERS... 9 FIGURE 5 : LIVE MODE FIGURE 6 : CHANGE PARAMETER IN LIVE MODE FIGURE 7 : MENU FIGURE 8 : SETTINGS FIGURE 9 : FRAME FORMAT FIGURE 10 : ABOUT DIALOG FIGURE 11 : EXIT DIALOG FIGURE 12 : MEMORY FILLED FIGURE 13 : ACQUISTION IN PROGRESS FIGURE 14 : RECORDING FINISHED FIGURE 15 : MEMORY WINDOW FIGURE 16 : CHANGE SET OUT FIGURE 17 : SAVE SEQUENCE FIGURE 18 : SSD VIEW FIGURE 19 : SSD SET SEQUENCE FIGURE 20 : FORMAT SSD DIALOG FIGURE 21 : SSD AND SEQUENCE INFORMATIONS Android TimeViewer Ver. 1.1 Ref SU-10-A Page 2

5 Concerning Android TimeViewer Use Android TimeViewer to capture and analyze video on your Android tablet from digital high-speed video cameras (CamRecord Sprinter Series) by Optronis. Android TimeViewer is optimized to work with single high-speed camera recordings. System Requirements TimeViewer Application works with Android tablets. Please familiarize first with Android operating system before handling the camera. This user manual can not give operating instructions for the Android system. The TimeViewer Application requires a tablet with Android 5.0 or higher (API 21 +). TimeViewer Application has been tested with Android (last official version) on a Google Nexus 9 tablet. In order to communicate with the camera, the user has to connect the Wi-Fi dongle provided with the camera (Ralink RT5370, RT2870 or RT3070). Tablets tested: - Google Nexus 9 (Recommended) - Samsung Galaxy Tab S Android TimeViewer Ver. 1.1 Ref SU-10-A Page 3

6 Install Please install TimeViewer by Google Play: Search the application name: TimeViewer Optronis and install the app on an android tablet. Uninstall Use Android functions to uninstall the TimeViewer App from your tablet. Software Licenses and Liability First Steps The application and this manual are the exclusive copyrights of Optronis. Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. Optronis makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. Future upgrades of application and system software and any changes in specifications and functions will be announced separately. The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. We recommend that you familiarize yourself with the application in advance of your first project. Connect a camera, setup Live Video and familiarize yourself with focus distance and diaphragm setting of the lens. Setup the high-speed camera, capture some content, create recordings. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 4

7 Android TimeViewer Application After installing the Android TimeViewer application, a TimeViewer shortcut appears on the window. Figure 1 : TimeViewer Launcher Android TimeViewer Ver. 1.1 Ref SU-10-A Page 5

8 Connect Connect a WiFi dongle to the high speed Optronis CamRecord Sprinter-series camera to its USB2 port. Switch on the camera and wait some seconds. Then start the application, search for the camera and connect to the camera. The camera system is intended to be handled by Android tablet via WiFi or by PC Windows software. The system does not operate using PC (Windows TimeViewer software) and tablet (Android TimeViewer App) at the same time. Troubleshooting connecting the camera Please contact support@optronis.com for any trouble connecting the camera. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 6

9 Connection After starting the Android TimeViewer software, the window below appears. Please select Scan to search for CamRecord cameras in the WiFi network. PLEASE WAIT SOME SECONDS Figure 2 : Scan When a camera is found, the camera name is displayed in the List View above Scan button (here: CamRecord-Sprinter CR-S3500. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 7

10 Figure 3 : Wi-Fi Link By clicking on CamRecord-Sprinter CR-S3500, the Wi-Fi connection between the camera and the tablet is established. You can then connect to the camera by clicking on Connect button. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 8

11 If you are facing some difficulties establishing Wi-Fi connection between the camera and the tablet, you can do it manually by entering configuration parameters in the Wi-Fi settings. On Android Wi-Fi settings, modify network parameters as followed and set password to : Figure 4 : Manual Wi-Fi Parameters Once Connected, Wi-fi status should be Connected, no Internet You can then start TimeViewer Application and directly click on Connect Button without scanning for network. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 9

12 Live Window After a connection, the camera is then operating in Live mode. This means, that a Live image is transferred from the camera to the tablet continuously. A direct menu on the top of the window allows to change the acquisition parameters: Frame Format, Frame Rate and Exposure Time. Figure 5 : Live Mode Android TimeViewer Ver. 1.1 Ref SU-10-A Page 10

13 Figure 6 : Change Parameter in Live Mode Android TimeViewer Ver. 1.1 Ref SU-10-A Page 11

14 Menu Settings For additional settings please select the settings menu by wiping the menu from the left window side. Settings Open Window: Wipe from left To right Figure 7 : Menu Android TimeViewer Ver. 1.1 Ref SU-10-A Page 12

15 Figure 8 : Settings Back to Live View Go back to the Live Window. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 13

16 Frame Format Changes the image size of the camera. Figure 9 : Frame Format Customize allows to select specific values. Frame Rate [FPS] Changes the speed of the camera in frames per second. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 14

17 Exposure Time [seconds] Changes the exposure time of the camera. Low values of exposure time (e.g. 1/10000) freeze fast moving objects but need a lot of light for illuminating the objects. High values are limited by the Frame Rate of the camera. Maximum exposure time is given by 1/FrameRate. Gain Changes the amplifier value inside the sensor to increase sensitivity. The CamRecord Sprinter camera allows for a gain of x1. Recording Memory Reduces the recording time of the camera. The lower the Recording Memory, the lower the recording time of the camera but the higher the number of sequences that can be stored on the SSD of the camera. Recording memory that has to be saved on camera SSD can be also reduced by Set In and Set Out. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 15

18 Trigger Position The camera uses a Ring-Memory This means that when starting a recording, the recording fills the camera memory until memory is full and then restarts automatically from the beginning. Setting the Trigger Position to e.g. 50% of the available memory, 50% of the image data is set in front of the Trigger and 50% of the image data is set behind the Trigger. A trigger signal generally stops the acquisition. Depending on the trigger position it stops immediately (Trigger Position at the end of the memory) or with some delay (Trigger Position between beginning and end of the memory) Synchronization Choose an internal or an external synchronization. Internal Synchronization uses the camera internal time base to generate the required frame rate. If the frame rate has to be synchronized to an external source please use external synchronization. For external synchronization, an external TTL signal has to be applied to the External Sync. pin of the camera. Please refer to the camera user manual for more information about external synchronization. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 16

19 Trigger Source The default trigger is via the application. When a separate trigger device is used, change the trigger source setting accordingly. Trigger can be active by application, by hardware switch, or by TTL signal. Trigger on Application: Please use the button Trigger Recording. Trigger Extern on Falling Edge (Trigger on Switch): Please connect a switch to the external trigger input of the camera or connect a TTL signal (low impedance < 100 Ohm). Trigger will be performed on falling edge of the TTL signal or on closing contact of a switch. Trigger on Extern TTL Rising Edge: Please connect a TTL signal (low impedance < 100 Ohm) to the external trigger input of the camera. Trigger will be performed on rising edge of the TTL signal. Device Name Name of the camera. Model Name Name of the camera model. Serial Name Camera Serial Number. Memory Size Camera internal memory. Sensor Color Monochrome (Black/White) or Color Sensor. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 17

20 Sensor Bayer Type Only for Color Sensor. Information about the configuration of the Color Bayer filter. Real Frame Rate For high frame rates, the internal synchronization clock of the camera don t allow to reach exactly the selected frame rate. The Real frame rate information shows the real frame rate of the camera. If the frame rate has to be accurate, please use external synchronization clock of the camera. Erase Data Base Erase all custom values added by Customizing in Frame Format, Frame Rate and Exposure Settings. Language Language of the application (English). Grid Adds a grid to the image. This is sometimes helpful to position the objects inside the image. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 18

21 About Android TimeViewer Application Version. Figure 10 : About Dialog Android TimeViewer Ver. 1.1 Ref SU-10-A Page 19

22 Exit Exit the Android TimeViewer application. Figure 11 : Exit Dialog Live Live Window and Acquisition. Memory Playback of a recorded sequence and storage. To view a Recording in the memory window, please switch to memory SSD Access to the SSD inside the camera. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 20

23 Acquire Sequence To acquire a sequence please use the buttons on the bottom of the window: From left to right: - Start / Stop Live View - Start Recording - Trigger Recording - Abort Recording Figure 12 : Memory Filled Android TimeViewer Ver. 1.1 Ref SU-10-A Page 21

24 Figure 13 : Acquistion In Progress Figure 14 : Recording Finished Android TimeViewer Ver. 1.1 Ref SU-10-A Page 22

25 Here is an example : Start the record, wait for the memory to be filled, once the memory filled, press the trigger button and wait until the end of the counter. Once the recording is finished, the view is still in live mode and doesn t switch automatically in memory mode. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 23

26 Memory Window Overview Memory allows to playback a recorded sequence. Goto Image Number Cut the sequence Save Sequence to SSD Playback Speed Navigate inside sequence Playback Sequence Figure 15 : Memory Window Android TimeViewer Ver. 1.1 Ref SU-10-A Page 24

27 To cut the image sequence please select Set In and Set out. Selecting the values can be done by typing in the exact value as shown in the image below. Figure 16 : Change Set Out When a sequence is playing, a lot of parameters are not available, you need to pause the sequence to change those. For example, if you want to go to live mode, you have to pause the playback from memory before going to live mode. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 25

28 Save Sequence to SSD To save a sequence in the SSD, set the marker Set IN and set Out and click on the Save Sequence to SSD button. A progress bar appears to give the current status of sequence saving. Figure 17 : Save Sequence During the saving process, all functions are unavailable. Wait until the end of the task to proceed to a new operation. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 26

29 SSD Window Overview SSD Window allows to playback a sequence from SSD. First thing to do is to open a sequence by clicking on Sequence Button. If no sequence is stored on the SSD, an error toast appears to inform the user that the SSD is empty. Figure 18 : SSD View Android TimeViewer Ver. 1.1 Ref SU-10-A Page 27

30 Figure 19 : SSD Set Sequence This view also allows to format the SSD by clicking on the Format SSD button. Figure 20 : Format SSD Dialog Android TimeViewer Ver. 1.1 Ref SU-10-A Page 28

31 Once a sequence is selected, some information on the sequence and the SSD can be retrieved by clicking on the Infos button. Figure 21 : SSD and Sequence Informations During the reading process, all functions are unavailable. To set new parameters or go back to memory mode or live mode, pause the reading sequence process first. Android TimeViewer Ver. 1.1 Ref SU-10-A Page 29

32 Appendix Customer Service For any questions or problems, please do not hesitate to ask our customer service: Optronis GmbH Ludwigstrasse Kehl Tel: +49 (0) Fax: +49 (0) info@optronis.com In case of problems please prepare the following information: Name of the device: (e.g. CamRecord CR-Series or CamRecord Sprinter Series) Serial-Number of the camera: Operating System: Android Software Version See About in the Settings Menu. Short description of the problem Android TimeViewer Ver. 1.1 Ref SU-10-A Page 30