4) The overcharge detection delay timer reset time function (function for the pulse charge) is provided. 1

One-cell lithium-ion/lithium-polymer battery protection IC MM3280 Series

MM3280 Series Outline MM3280 series are protection IC using high CMOS process for overcharge, overdischarge and overcurrent protection of the rechargeable Lithium-ion or Lithium-polymer battery. The overcharge,

MM3638 series OUTLINE FEATURES. One-cell Li-ion/Li-polymer battery protection IC. MITSUMI ELECTRIC Co.,LTD.

MM33 series OUTLINE The MM33 series are protection IC for Liion and Lipolymer battery. MM33 protects the battery pack from overcharge, overdischarge, and overcurrent, etc. by controlling FET SW. In the

Protection for Lithium-Ion/Lithium Polymer Batteries (1 cell) Monolithic IC MM3090 Series

Protection for Lithium-Ion/Lithium Polymer Batteries (1 cell) Monolithic IC MM3090 Series pril 26, 2004 Outline This is a protection IC developed for use with 1-serial cell lithium-ion/lithium polymer

1-Cell Li-ion Battery Protection IC with High-accuracy Overcharge Protection

Series 1-Cell Li-ion Battery Protection IC with High-accuracy Overcharge Protection OUTLINE The R5443Z is a one-cell Li-ion / polymer battery protection IC provides overcharge, overdischarge, and discharge

Li-ION/POLYMER 1CELL PROTECTOR R5486 SERIES Outline

Li-ION/POLYMER 1CELL PROTECTOR R5486 SERIES 20140801 NO. EA-339-140801 Outline The R5486 is a high voltage tolerance CMOS-based protection IC for over-charge/discharge and over-current of rechargeable

Li-ION/POLYMER 1CELL PROTECTOR R5480 SERIES. Outline. Preliminary_

Li-ION/POLYMER 1CELL PROTECTOR R5480 SERIES NO. EA-308-130709 Outline The R5480 is a high voltage tolerance CMOS-based protection IC for over-charge/discharge and over-current of rechargeable one-cell

Overdischarge detection delay time Setting by capacitor of CUV ±50% Overcharge release delay time 1/10 to 10times of tvdet1 ±50%

3cells Li ion/polymer battery protection IC MM3783 Series Description The MM3783 series are protection IC using high voltage CMOS process for overcharge, overdischarge, overcurrent, and temperature protection

FS326. One Cell Lithium-ion/Polymer Battery Protection IC. FS326 x Serial code from A to G *

General Description is a series of lithium-ion and lithium-polymer rechargeable battery protection ICs with high accurate voltage detection and delay circuits. These ICs are suitable for protection of

3 to 5cells Li-ion/Li-polymer battery protection IC MM3575 Series

3 to 5cells Li-ion/Li-polymer battery protection IC MM3575 Series Outline The MM3575 series are protection IC using high voltage CMOS process for overcharge, overdischarge and overcurrent protection of

Overview The LV51131T is a protection IC for 2-cell lithium-ion secondary batteries.

Ordering number : ENA1152A LV51131T CMOS IC 2Cell LithiumIon Secondary Battery Protection IC Overview The LV51131T is a protection IC for 2cell lithiumion secondary batteries. Features Monitoring function

LV51132T. Overview. Features. CMOS IC 2-Cell Lithium-Ion Secondary Battery Protection IC

Ordering number : ENA1827A CMOS IC 2Cell LithiumIon Secondary Battery Protection IC http://onsemi.com Overview The is a protection IC for 2cell lithiumion secondary batteries. Features Monitoring function

System Reset IC with delay Monolithic IC PST89XB Series

System Reset IC with delay Monolithic IC 89XB Series Outline This IC is a reset IC for turning on/off power supply and power flicker in CPU or logic systems. This IC can change delay time by an external

UNISONIC TECHNOLOGIES CO., LTD UB2421 Preliminary CMOS IC

UNISONIC TECHNOLOGIES CO., LTD ONE CELL LITHIUM-ION / POLYMER BATTERY PROTECTION IC DESCRIPTION UTC UB2421 is a lithium-ion / lithium-polymer rechargeable battery protection IC incorporating high accuracy

LC75808E, 75808W. 1/8 to 1/10 Duty LCD Display Drivers with Key Input Function

Ordering number : ENN6370A CMOS IC LC75808E, 75808W 1/8 to 1/10 Duty LCD Display Drivers with Key Input Function Overview The LC75808E and LC75808W are 1/8 to 1/10 duty LCD display drivers that can directly

CS213. Protection IC for 1-Cell Battery Pack. Description. Features. Application. Typical Application Circuit

Protection IC for 1-Cell Battery Pack Features Detection Accuracy Over-charge Detection: ±40mV Over-discharge Detection: ±100mV Discharge Over-current Detection: ±20mV High Withstand Voltage Absolute maximum

A4805 SUPERVISOR (RESET IC) HIGH VOLTAGE HIGH PRECISION VOLTAGE DETECTOR

DESCRIPTION The is a series of high voltage high-precision voltage detectors developed using standard CMOS process. The detection voltage is fixed internally with an accuracy of ±2.4% Nch open-drain. Low

System Reset IC with delay Monolithic IC PST89XA Series

System Reset IC with delay Monolithic IC 89XA Series Outline This IC is a reset IC for turning on/off power supply and power flicker in CPU or logic systems. This IC can change delay time by an external

LC75700T. Key Scan IC. Package Dimensions. Overview. Features CMOS IC

Ordering number : ENN7632 CMOS IC LC75700T Key Scan IC Overview The LC75700T is a key scanning LSI that accepts input from up to 30 keys and can control up to four generalpurpose output ports. Therefore

S-5840B Series TEMPERATURE SWITCH IC (THERMOSTAT IC) WITH LATCH. Features. Applications. Package.

www.sii-ic.com TEMPERATURE SWITCH IC (THERMOSTAT IC) WITH LATCH SII Semiconductor Corporation, 2007-2012 Rev.2.1_01 The is a temperature switch IC (thermostat IC) with a latch function which detects the

Specification. Ultra-Small Package High-Precision Voltage Detectors. Description. Features. Ordering Information. Applications.

Description The U61Cxx series is a series of high-precision voltage detectors developed using CMOS process. The detection voltage is fixed internally with an accuracy of ±2.0%. Two output forms, Nch open-drain

TTP224-ASD 4 KEY TOUCH PAD DETECTOR IC

4 KEY TOUCH PAD DETECTOR IC GENERAL DESCRIPTION The SP224-ASD is capacitive sensing design specifically for touch pad controls. Stable sensing method can cover diversity conditions. Human interfaces control

S-8241 Series. Rev.3.2 BATTERY PROTECTION IC (FOR A SINGLE-CELL PACK) !"Features. ! Applications! Package Name

Rev.3.2 BATTERY PROTECTION IC (FOR A SINGLE-CELL PACK) The S-8241 is a series of lithium-ion/lithium polymer rechargeable battery protection ICs incorporating high-accuracy detection circuits and delay

2 keys Touch Pad Detector IC

2 keys Touch Pad Detector IC Outline The TonTouch TM IC is capacitive sensing design specifically for touch pad controls. The device built in regulator for touch sensor. Stable sensing method can cover

SII Semiconductor Corporation, Rev.2.2_01

www.sii-ic.com TEMPERATURE SWITCH IC (THERMOSTAT IC) SII Semiconductor Corporation, 2009-2015 Rev.2.2_01 The is a temperature switch IC (thermostat IC) which detects the temperature with a temperature

NJW4120. Lithium-ion Battery Charger Controller IC with Timer

Lithium-ion Battery r Controller IC with Timer GENERAL DESCRIPTI NJW4120 is a 1-cell and 2-cell lithium ion battery charge control IC with a built-in AC-DC secondary side control feature. Using a photocoupler

Preliminary TTP224N-FO8 TonTouch TM 1 KEY TOUCH PAD DETECTOR IC GENERAL DESCRIPTION The TTP224N-FO8 TonTouch TM IC is capacitive sensing design specif

1 KEY TOUCH PAD DETECTOR IC GENERAL DESCRIPTION The IC is capacitive sensing design specifically for touch pad controls. The device built in regulator for touch sensor. Stable sensing method can cover

4 keys Touch Pad Detector IC

4 keys Touch Pad Detector IC Outline The TonTouch TM IC is capacitive sensing design specifically for touch pad controls. The device built in regulator for touch sensor. Stable sensing method can cover

UNISONIC TECHNOLOGIES CO., LTD

UNINIC TECHNOLOGIES CO., LTD 20-BIT SERIAL TO PARALLEL CONVERTER DESCRIPTION The UTC LS3718 is a 20-bit serial to parallel converter utilizing CMOS Technology. It is incorporates control circuit, shift

S-2900A. Rev.1.1. CMOS 512-bit SERIAL E 2 PROM

Rev.1.1 CMOS 512-bit SERIAL E 2 PROM S-29A The S-29A is a wide operating voltage range, low power consumption 512-bit E 2 PROM. The organization is 64-word 8-bit, and can be read or written serially. It

System Reset with Delay Time Circuit Monolithic IC PST596~598 Series

System Reset with Delay Time Circuit Monolithic IC 96~98 Series July 21, 2000 Outline This IC functions in a variety of CPU systems and other logic systems, to detect supply voltage and reset the system

AS Channels Capacitive Touch Sensor IC From Santa Clara, United States of America

ASI Competitor Equivalent A Competitor Equivalent B Volts Leading Performance: ESD HBM >8k Volts (Directly Applied to All IC Pins) Operating Temperature up to >+95 0 C Features Overview Analog and Digital

TS04. 4-Channel Self Calibration Capacitive Touch Sensor SPECIFICATION V2.0

TS4 4-Channel Self Calibration Capacitive Touch Sensor SPECIFICATION V2. Specification TS4 (4-CH Auto Sensitivity Calibration Capacitive Touch Sensor). General Feature 4-Channel capacitive sensor with

Semiconductor June 1992

FEDL96-3 FEDL96-3 Semiconductor June 992 MSM96-, -2 LCD Driver with Keyscan Function This version: MSM96-, Sep. 2 Previous version: Nov. 997-2 GENERAL DESCRIPTION The MSM96- is an LCD driver for a /3 duty

SII Semiconductor Corporation, Rev.2.1_00

www.sii-ic.com 105 C OPERATION, 3.8 μa CURRENT CONSUMPTION WATCHDOG TIMER WITH RESET FUNCTION SII Semiconductor Corporation, 2015-2017 The is a watchdog timer developed using CMOS technology, which can

Battery Protection IC for Single-cell Pack

Battery Protection IC for Single-cell Pack Features Low supply current Normal operation: 3uA typ. @ VCC = 3.9V Power-down mode: 0.1uA max. @VCC = 2.0V Over-charge detection voltage (V CU ) 4.25~4.3V, accuracy:

Drawing code Package Tape Reel 8-Pin DIP DP008-F 8-Pin SOP(JEDEC) FJ008-A FJ008-D FJ008-D 8-Pin TSSOP FT008-A FT008-E FT008-E

Rev. 3.2_ CMOS SERIAL E 2 PROM Features The is a high speed, low current consumption, 8 K-bit serial E 2 PROM with a wide operating voltage range. It is organized as 512-word 16-bit respectively. Each

IC for CMOS System Reset Monolithic IC PST81XX, 82XX Series

IC for CMOS System Reset 8XX, 8XX Series IC for CMOS System Reset Monolithic IC 8XX, 8XX Series Outline This IC functions in a variety of CPU systems and other logic systems, to detect supply voltage and

Type Version Ordering Code Package PEB 2025-N V 1.5 Q67100-H6300 P-LCC-28-R (SMD) PEB 2025-P V 1.5 Q67100-H6241 P-DIP-22

ISDN Exchange Power Controller (IEPC) PEB 2025 CMOS IC Features Supplies power to up to four transmission lines CCITT recommendations compatible for power feed at the S interface Each line is individually

P3C1256 HIGH SPEED 32K x 8 3.3V STATIC CMOS RAM

HIGH SPEED 3K x 8 3.3 STATIC CMOS RAM FEATURES 3.3 Power Supply High Speed (Equal Access and Cycle Times) 1///5 (Commercial) //5 (Industrial) Low Power Single 3.3 olts ±.3olts Power Supply Easy Memory

Low Voltage, 10-Bit Digital Temperature Sensor in 8-Lead MSOP AD7314

a FEATURES 10-Bit Temperature-to-Digital Converter 35 C to +85 C Operating Temperature Range 2 C Accuracy SPI and DSP Compatible Serial Interface Shutdown Mode Space-Saving MSOP Package APPLICATIONS Hard

One-Cell Li Battery Protectors

www.din-tek.jp One-Cell Li Battery Protectors General Description The DTQE5242-XXXX Series are protectors for lithium-ion and lithium polymer rechargeable battery with high accuracy voltage detection.

S-2812A/2817A. Rev.1.1. CMOS 16K-bit PARALLEL E 2 PROM

Rev.1.1 CMOS 16K-bit PARALLEL E 2 PROM The S-2812A and the S-2817A are low power 2K 8-bit parallel E 2 PROMs. The S-2812A features wide operating voltage range, and the S-2817A features 5-V single power

DS1233A 3.3V EconoReset

3.3V EconoReset www.maxim-ic.com FEATURES Automatically restarts microprocessor after power failure Monitors pushbutton for external override Internal circuitry debounces pushbutton switch Maintains reset

S-2900A. Rev CMOS 512-bit SERIAL E 2 PROM

Rev.1.11 CMOS 512-bit SERIAL E 2 PROM S-29A The S-29A is a wide operating voltage range, low power consumption 512-bit E 2 PROM. The organization is 64-word 8-bit, and can be read or written serially.

TTP226. Preliminary 8 KEYS TOUCH PAD DETECTOR IC GENERAL DESCRIPTION

8 KEYS TOUCH PAD DETECTOR IC GENERAL DESCRIPTION The TTP222 is a touch pad detector IC which offers 8 touch keys. The touching detection IC is designed for replacing traditional direct button key with

S-8215A Series BATTERY PROTECTION IC FOR 3-SERIAL TO 5-SERIAL CELL PACK (SECONDARY PROTECTION) Features. Application. Packages.

www.ablicinc.com BATTERY PROTECTION IC FOR 3-SERIAL TO 5-SERIAL CELL PACK (SECONDARY PROTECTION) ABLIC Inc., 2010-2017 The is used for secondary protection of lithium-ion rechargeable batteries, and incorporates

Operating temperature Topr 40 to +85 C Storage temperature Tstg 55 to +125 C

Ordering number : EN3356A SANYO Semiconductors DATA SHEET LC7185-8750 Overview This 27 MHz band, PLL frequency synthesizer LSI chip is designed specifically for CB transceivers. The specifications are

VCC NC PROTECT DI DO. Table 1

Rev.1.11 CMOS SERIAL E 2 PROM Features Low power consumption Standby :0.8 µa Max. (V CC =5.5 V) Operating :0.8 ma Max. (V CC =5.5 V) 0.4 ma Max. (V CC =2.7 V) Low operating voltage range Write : 1.8 to

TS2043 Preliminary CMOS IC

UNISONIC TECHNOLOGIES CO., LTD TS2043 Preliminary CMOS IC TOUCH PANEL CONTROLLER DESCRIPTION The UTC TS2043 is a highly integrated 12-bit SAR analog-to-digital (A/D) converter designed for touch panel

CD4023BC Buffered Triple 3-Input NAND Gate

CD4023BC Buffered Triple 3-Input NAND Gate General Description These triple gates are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P- channel enhancement mode transistors.

HT1628 RAM Mapping LCD Driver

RAM Mapping 116 2 LCD Driver Features Logic voltage 2.4V~5.5V LCD operating voltage (VLCD) 2.4V~5.5V LCD display 2 commons, 116 segments Support a maximum of 58 4 bit Display RAM Duty Static, 1/2; Bias

High-side Power Distribution Switch NCT3521U

High-side Power Distribution Switch NCT3521U -Table of Content- 1. GENERAL DESCRIPTION...1 2. FEATURES...1 3. APPLICATIONS...2 4. PIN CONFIGURATION AND DESCRIPTION...2 5. TYPICAL APPLICATION CIRCUIT...3

16COM / 80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD

INTRODUCTION KS0070B is a dot matrix LCD driver & controller LSI which is fabricated by low power CMOS technology. It is capable of displaying 1 or 2 lines with the 5 7 format or 1 line with the 5 10 dots

LC75700T/D. Key Scanning IC

Key Scanning IC Overview The LC75700T is a key scanning LSI that accepts input from up to 30 keys and can control up to four general purpose output ports. Therefore it can reduce the number of lines to

HM628128BI Series. 131,072-word 8-bit High speed CMOS Static RAM

131,072-word 8-bit High speed CMOS Static RAM ADE-203-363A(Z) Rev. 1.0 Apr. 28, 1995 The Hitachi HM628128BI is a CMOS static RAM organized 131,072-word 8-bit. It realizes higher density, higher performance

S-29530A/29630A CMOS SERIAL E 2 PROM. Rev.1.2_00. Features. Packages

Rev.1.2_ CMOS SERIAL E 2 PROM The S-2953A / 63A series are low power 16K / 32K-bit E 2 PROM with a low operating voltage range. They are organized as 124-word 16-bit and 248-word 16bit, respectively. Each

Drawing code Package Tape Reel Land 8-Pin DIP DP008-F 8-Pin SOP(JEDEC) FJ008-A FJ008-D FJ008-D 8-Pin TSSOP FT008-A FT008-E FT008-E

Rev.4.3_ CMOS SERIAL E 2 PROM Features The is a high speed, low current consumption, 1/2/4 K-bit serial E 2 PROM with a wide operating voltage range. It is organized as 64-word 16- bit, 128-word 16-bit,

5 mv- step (The Overcharge release voltage can be selected within the range where a difference from Overcharge detection voltage is 0 to 0.

Rev.3.0 BATTERY PROTECTION IC (FOR A 2-SERIAL-CELL PACK) S-8232 SERIES The 8232 is a series of lithium-ion rechargeable battery protection ICs incorporating high-accuracy voltage detection circuits and

Table 1 Brief Specifications

Rev.1.1 MICROCOMPUTER WITH BUILT-IN PAGING DECODER The microcomputer incorporates a decoder conforming to CCIR Radio Paging Decode 1(POCSA Code), a melody generator, an LCD driver and a timer. Only attaching

4-ch BTL Motor Driver for CD Players Monolithic IC MM1469

-ch BTL Motor Driver for CD Players Monolithic IC MM9 Outline This IC is a -ch BTL driver developed for driving motors and actuators for CD players. With built-in 3.3 (MM9PH) or 5. (MM9XH) regulator and

OTP MATRIX 3-D MEMORY - 32PIN TSOP 16MB, 32MB, 64MB DATA SHEET DOCUMENT NUMBER: DS004 REVISION: 1.11 REVISION DATE:

16MB, 32MB, 64MB DATA SHEET REVISION: 111 REVISION DATE: 06-24-05 REV 111 06/24/05 NOTICES: Copyright 2002, 2004, 2005 Matrix Semiconductor, Inc All rights reserved If you have received this document from

Lithium-Ion Battery Charge Control IC Monolithic IC MM3439

Lithium-Ion Battery Charge Control IC Monolithic IC MM3439 Outline This IC is a Mitsumi has developed an IC that monitors 3 power supplies constituted by an AC adaptor, the USB port, and lithium ion secondary

UNISONIC TECHNOLOGIES CO., LTD 6621 Preliminary LINEAR INTEGRATED CIRCUIT

UNISONIC TECHNOLOGIES CO., LTD 6621 Preliminary LINEAR INTEGRATED CIRCUIT RAM MAPPLING 32 4 LCD CONTROLLER FOR I/O μc DESCRIPTION The UTC 6621 is a 128 patterns (32 4), memory mapping, and multi-function

AC input detection and power supply protection IC Monolithic IC MM3313

C input detection and power supply protection IC Monolithic IC MM333 Outline This IC is an IC providing C input detection and power supply protection for C power supplies. It provides three detection functions

TH58NVG3S0HTAI0 8 GBIT (1G 8 BIT) CMOS NAND E 2 PROM DESCRIPTION FEATURES C TOSHIBA MOS DIGITAL INTEGRATED CIRCUIT SILICON GATE CMOS

TOSHIBA MOS DIGITAL INTEGRATED CIRCUIT SILICON GATE CMOS 8 GBIT (G 8 BIT) CMOS NAND E 2 PROM DESCRIPTION The TH58NVG3S0HTAI0 is a single 3.3V 8 Gbit (9,26,805,504 bits) NAND Electrically Erasable and Programmable

256K x 16 4Mb Asynchronous SRAM

FP-BGA Commercial Temp Industrial Temp 256K x 16 4Mb Asynchronous SRAM GS74117AX 8, 10, 12 ns 3.3 V V DD Center V DD and V SS Features Fast access time: 8, 10, 12 ns CMOS low power operation: 130/105/95

2 AA Cell to 3.3V USB On-The-Go Devices White LED Drivers Handheld Devices. The HM3200B is available in the 6-pin SOT23-6.

Low Noise, Regulated Charge Pump DC/DC Converter Features Fixed 3.3V ± 4% Output VIN Range: 1.8V to 5V Output Current: 100mA Constant Frequency Operation at All Loads Low Noise Constant Frequency (1.2MHz)

LN61C. Ultra-Small Package High-Precision Voltage Detector. General Description. Applications. Features. Package. Ordering Information

Ultra-Small Package High-Precision Voltage Detector General Description The series is a series of high-precision voltage detectors developed using CMOS process. The detection voltage is fixed internally

16COM / 40SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD

INTRODUCTION KS0066U is a dot matrix LCD driver & controller LSI whichis fabricated by low power CMOS technology It can display 1or 2 lines with the 5 8 dots format or 1 line with the 5 11 dots format

Before powering on your driver, read this manual thoroughly. If you have any doubt or suggestion, please do not hesitate to contact us!

Laser diode driver Datasheet & UserManual Before powering on your driver, read this manual thoroughly. If you have any doubt or suggestion, please do not hesitate to contact us!, 37 Sedova St, Off 209,

NJU keys input key-scan IC GENERAL DESCRIPTION PACKAGE OUTLINE FEATURES BLOCK DIAGRAM PIN CONFIGURATION

24 keys input key-scan IC GENERAL DESCRIPTION The NJU6010 is 24 keys input key-scan IC with internal oscillation. It scans the maximum 4x6 key matrix. And the key data transmit to CPU. The microprocessor

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. E2E1022-27-Y4 Semiconductor MSM80C48/49/50 MSM80C35/39/40 Semiconductor

S-93C76A 3-WIRE SERIAL E 2 PROM. Features. Packages. ABLIC Inc., Rev.7.0_03

www.ablicinc.com 3-WIRE SERIAL E 2 PROM ABLIC Inc., 21-215 Rev.7._3 The is a high speed, low current consumption, 3-wire serial E 2 PROM with a wide operating voltage range. The S- 93C76A has the capacity

TC58NYG1S3HBAI4 2 GBIT (256M 8 BIT) CMOS NAND E 2 PROM DESCRIPTION. FEATURES Organization x8 Memory cell array K 8 Register C

MOS DIGITAL INTEGRATED CIRCUIT SILICON GATE CMOS 2 GBIT (256M 8 BIT) CMOS NAND E 2 PROM DESCRIPTION The is a single.8v 2Gbit (2,28,70,376 bits) NAND Electrically Erasable and Programmable Read-Only Memory

Designator Description Symbol Description CMOS output Output Configuration N-ch open drain output

Voltage Detectors With Delay Circuit Built-In LN61F General Description The LN61F is a micro-power voltage detector supervising the power supply voltage level for microprocessors or digital systems, which

Remote 16-bit I/O expander for Fm+ I 2 C-bus with interrupt and reset. Description

Remote 16-bit I/O expander for Fm+ I 2 C-bus with interrupt and reset Features Operation power supply voltage from 2.3V to 5.5V 16-bit remote I/O pins that default to inputs at powerup 1 MHz I 2 C-bus

Product Specifications

Product Specificatio L66S7-GAS/GHS/GLS RE:.6 General Information 8MB 6Mx6 SDRAM PC/PC NON-ECC UNBUFFERED -PIN SODIMM Description: The L66S7 is a 6M x 6 Synchronous Dynamic RAM high deity memory module.

TTP229-BSF TonTouch TM

16 KEYS OR 8 KEYS TOUCH PAD DETECTOR IC GENERAL DESCRIPTION The IC is capacitive sensing design specifically for touch pad controls. The device built in regulator for touch sensor. Stable sensing method

A mA CMOS LOW NOISE LOW-DROPOUT VOLTAGE REGULATOR. Application. Pin Description

Description The series of fixed output low dropout linear regulators are designed for portable battery powered applications which require low noise operation, fast enable response time, and low dropout.

CE6260 Series. Low Dropout Voltage 500mA CMOS LDO Regulator INTRODUCTION FEATURES APPLICATIONS

Low Dropout Voltage 500mA CMOS LDO Regulator INTRODUCTION The are a group of positive voltage regulators manufactured by CMOS technologies with high ripple rejection, extremely low power consumption and

RW CH Segment Driver

Functions: Dot matrix LCD driver with two 40 channel outputs Bias voltage (V1 ~ V4) Input/output signals Input : Serial display data and control pulse from controller IC Output : 40 X 2 channels waveform

UNISONIC TECHNOLOGIES CO.,LTD. UL318 Preliminary LINEAR INTEGRATED CIRCUIT

UNISONIC TECHNOLOGIES CO.,LTD. UL318 Preliminary LINEAR INTEGRATED CIRCUIT SERIAL-INTERFACED 10-DIGIT LED CONTROLLER IC WITH KEYSCAN DESCRIPTION The UL318 is a compact LED controller and driver that interface

±15kV ESD-Protected, Single/Dual/Octal, CMOS Switch Debouncers

19-477; Rev 1; 1/99 ±15k ESD-Protected, Single/Dual/Octal, General Description The are single, dual, and octal switch debouncers that provide clean interfacing of mechanical switches to digital systems.

HT1621. RAM Mapping 32 4 LCD Controller for I/O µc. Features. General Description. Selection Table

RAM Mapping 32 4 LCD Controller for I/O µc Features Operating voltage : 2.4V~5.2V Built-in 256kHz RC oscillator External 32.768kHz crystal or 256kHz frequency source input Selection of 1/2 or 1/3 bias,

XRD8775 CMOS 8-Bit High Speed Analog-to-Digital Converter

CMOS 8-Bit High Speed Analog-to-Digital Converter April 2002-4 FEATURES 8-Bit Resolution Up to 20MHz Sampling Rate Internal S/H Function Single Supply: 5V V IN DC Range: 0V to V DD V REF DC Range: 1V to

ABLIC Inc., Rev.1.4_00

www.ablicinc.com S-35720 Series FOR AUTOMOTIVE 125 C OPERATION WITH INTERRUPT TIME SETTING PIN CONVENIENCE TIMER ABLIC Inc., 2015-2018 Rev.1.4_00 The convenience timer is a CMOS timer IC which operates

A6150 LOW DROPOUT VOLTAGE REGULATOR 150mA CMOS LOW NOISE

DESCRIPTION The series of fixed output low dropout linear regulators are designed for portable battery powered applications which require low noise operation, fast enable response time, and low dropout.

8M x 64 Bit PC-100 SDRAM DIMM

PC-100 SYNCHRONOUS DRAM DIMM 64814ESEM4G09TWF 168 Pin 8Mx64 (Formerly 64814ESEM4G09T) Unbuffered, 4k Refresh, 3.3V with SPD Pin Assignment General Description The module is a 8Mx64 bit, 9 chip, 168 Pin

HT Sound Generator

6-Sound Generator Features Single power supply: 2.4V~4.5V Low standby current: 1µA (Typ.) at V DD=3V Auto power-off function Six different sound sections K1 to K6 independently chosen or as a cascade control

S-8225B Series BATTERY MONITORING IC FOR 3-SERIAL TO 5-SERIAL CELL PACK. Features. Application. Package.

www.ablicinc.com BATTERY MONITORING IC FOR 3-SERIAL TO 5-SERIAL CELL PACK ABLIC Inc., 2012-2015 Rev.1.5_02 The includes high-accuracy voltage detection circuits and delay circuits, and can monitor the

LMB202DBC LCD Module User Manual

LMB202DBC LCD Module User Manual Shenzhen TOPWAY Technology Co., Ltd. Rev. Descriptions Release Date 0.1 Prelimiay release 2005-03-01 URL Document Name LMB202DBC-Manual-Rev0.1.doc Page 1 of 11 Table of

PI4IOE5V bit general purpose outputs for 1MHz I 2 C bus

Features Operation power supply voltage from 2.3V to 5.5V 4-bit I 2 C-bus GPO 1 MHz I 2 C-bus interface with 30 ma SDA sink capability for 4000pF Latched outputs with 25mA capability for directly driving

8. SED1565 Series. (Rev. 1.2)

8. (Rev. 1.2) Contents GENERAL DESCRIPTION...8-1 FEATURES...8-1 BLOCK DIAGRAM...8-3 PIN DIMENSIONS...8-4 PIN DESCRIPTIONS...8-2 DESCRIPTION OF FUNCTIONS...8-24 COMMANDS...8-48 COMMAND DESCRIPTION...8-57

FM16W08 64Kb Wide Voltage Bytewide F-RAM

Pre-Production FM16W08 64Kb Wide Voltage Bytewide F-RAM Features 64Kbit Ferroelectric Nonvolatile RAM Organized as 8,192 x 8 bits High Endurance 100 Trillion (10 14 ) Read/Writes 38 year Data Retention

SS1438 Unipolar Hall Switch

Features and Benefits Wide operating voltage range from 2.5V to 24V Medium sensitivity CMOS technology Chopper-stabilized amplifier stage Superior temperature stability Extremely low switchpoint drift

S-24 Series. Rev.1.1 SERIAL NON-VOLATILE RAM

Rev.. SERIL NON-VOLTILE RM S- Series The S- Series is a non-volatile CMOS RM, composed of a CMOS static RM and a non-volatile electrically erasable and programmable memory (E PROM) to backup the SRM. The

TC9256APG, TC9256AFG, TC9257APG, TC9257AFG

PLL for DTS TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC9256, 57APG/AFG TC9256APG, TC9256AFG, TC9257APG, TC9257AFG The TC9256APG, TC9256AFG, TC9257APG and TC9257AFG are phase-locked loop

VGA Port Companion Circuit

GA Port Companion Circuit Features Single chip solution for the GA port interface Includes ESD protection, level shifting, and RGB termination Seven channels of ESD protection for all GA port connector

XRD87L85 Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter

Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter April 2002-1 FEATURES 8-Bit Resolution Up to 10 MHz Sampling Rate Internal S/H Function Single Supply: 3.3V VIN DC Range: 0V to V DD VREF DC

Ai2410. A1 PROs. Block Diagram. Signal Processor for Single-Chip CCD B/W Camera. 64 pin LQFP (7x7) VEE

A1 PROs Signal Processor for Single-Chip CCD B/W Camera Description The is a signal processor for CCD B/W camera application. It combines CCD analog signal processor, timing logic controller and vertical