Intelligent Technologies (IT.) Starter Network Adapter Products (SNAP) Product Focus D77B-DSNAP D77B-QSNAP
|
|
- Elaine Simon
- 6 years ago
- Views:
Transcription
1 Intelligent Technologies (IT.) Starter Network Adapter Products (SNAP) Product Focus D77B-DSNAP D77B-QSNAP Extending the Communication Capabilities of Electromechanical Starters and Soft Starters
2 DSNAP - Direct DeviceNet Connectivity DeviceNet To Control PC or PLC IT. EM or S751 Soft Starters and IT. DSNAP DSNAP - Distributed Motor Control Solutions IT. Starters provide unmatched size, performance, and reliability. IT. DSNAP connects to DeviceNet for comprehensive diagnostics, monitoring, and control capability with enhanced starter functionality. QSNAP - Direct Motor Control Panel D77D-DNA I/O D77A I/O DeviceNet To Control PC or PLC IT. EM or S751 Soft Starters and IT. QSNAP 24V DC IT. Supply QCPort Flexible Interconnect System QSNAP - Advantages in Motor Control Solutions IT. Starters provide unmatched size, performance, and reliability. IT. QSNAP interconnects to QCPort for comprehensive diagnostics, monitoring, and control capabilities with enhanced starter functionality. IT. D77A I/O is compact, full-featured, and rugged. IT. D77D-DNA DeviceNet adapter combines information from I/O and motor control devices for communications for control by a PC or PLC. QCPort interconnect system quickly and reliably connects data and power to all devices via backplane and pre-made cables.
3 There s More to IT. Expand the communications and diagnostic capabilities of your IT. Electromechanical Starters and S751 Soft Starters. Talk to a Cutler- Hammer sales engineer today about adding SNAP.
4 With a direct focus on speed, control system design, and customer profitability, Eaton is proud to offer Cutler-Hammer Intelligent Technologies (IT.) a complete line of forwardthinking motor control devices. Through our Starter Network Adapter Products (SNAP), we are able to greatly extend the feature set of the IT. Electromechanical Starters and IT. S751 Soft Start products. The end result is a communicating motor controller that delivers advanced diagnostics, monitoring, and control capabilities at a competitive price. Advanced Motor Data and Control Diagnostics RMS average current Percent thermal memory Integral contact position detection Operating status and fault codes At speed (soft starters) Start/stop control Run forward/reverse control Trip reset Extended Starter Capabilities Pre-trip warnings (adjustable) Ground fault detection (with accessory) Fault log Start-up nuisance trip avoidance (adjustable) Adjustable current level warning Adjustable underload warning Direct DeviceNet Connectivity (DSNAP) With IT. DSNAP, your motor controller is presented to DeviceNet as a single DeviceNet node. This allows the starter to be controlled and monitored from a PLC or PC based control system over DeviceNet. All monitoring, diagnostic and control capabilities, along with an extended feature set, are now available to DeviceNet. Integrated with IT. D77A I/O and Network Adapter (QSNAP) IT. QSNAP provides the most cost-effective approach to integrate DeviceNet into a motor control solution using multiple IT. Motor Controllers and IT. D77A I/O products. Quick Connect Port (QCPort) provides a flexible interconnect of the data and power for all connected devices. The DeviceNet D77D-DNA adapter provides the combined data of QSNAP and D77A I/O as a single DeviceNet node to a control PC or PLC. Simple Mounting and Configuration IT. SNAP front mounts on the auxiliary contact location of the motor controller, leaving positions available for additional auxiliary contact blocks. A factory provided cable assembly connects the SNAP to the starter overload relay. SNAP products are ready to use in basic operation mode with no configuration beyond setting the address switches. For advanced feature set up and on-line monitoring, the CH Studio software package provides an effective, userfriendly environment. Alternatively, any DeviceNet management tool capable of importing an EDS file can be used to set operating parameters on the DSNAP The IT. I/O family adds to the broad range of industry leading control components available from Eaton s Cutler-Hammer business.
5 Technical Specifications IT. SNAP Products Catalog Number D77B-DSNAP D77B-QSNAP Consult Factory Consult Factory Description DeviceNet Starter Network Adapter Product QCPort Starter Network Adapter Product Auxiliary sensing device for reversing starters Ground fault detection module Product Information Feature Rating Compatible Starters All IT. EM starters except IEC Size A, G, H, NEMA 6, 7, 8 (E101, E501, N101, N501) All IT. S751 soft starters UL/CSA Certification UL 508, CSAC22.2 NO CE Certification Available Data Data Status Description Indicates motor controller operation; including warning or trip information Fault / Warning Code Codes include: thermal overload, phase loss / unbalance, ground fault, and communication errors Run Forward/Reverse Average Current Thermal Memory Current Threshold At Reference Fault Queue Indication of running condition of the motor controller for both non-reversing and reversing applications Average RMS current of the motor Percent of maximum I 2 T representing the thermal loading of the motor in terms of motor thermal capacity (0 to 100%) A warning to alert the user when the user settable threshold value in %FLA has been exceeded (Soft start only) the soft start ramp is complete and bypass engaged The last 5 fault codes are stored in the SNAP Enhanced Feature Settings Feature Underload Warning Current Threshold Warning Description Detects an underload condition (%FLA) Detects when a current level has been exceeded (%FLA)
6 Eaton s Cutler-Hammer business is a worldwide leader providing customerdriven solutions. From power distribution and electrical control products to industrial automation, the Cutler-Hammer business utilizes advanced product development, world-class manufacturing, and offers global engineering services and support. To learn more about Eaton s innovative Cutler-Hammer products and solutions call , for engineering services call , or visit Eaton Corporation is a global $7.3 billion diversified industrial manufacturer that is a leader in fluid power systems; electrical power quality, distribution and control; automotive engine air management and fuel economy; and intelligent truck systems for fuel economy and safety. Eaton has 49,000 employees and sells products in more than 50 countries. For more information, visit Eaton Corporation Cutler-Hammer business unit 1000 Cherrington Parkway Moon Township, PA United States tel: Eaton Corporation All Rights Reserved Printed in USA Form No. BR E / CSS 2904 March 2002
Intelligent Technologies
Intelligent Technologies QCPort Starter Network Adapter Product (QSNAP) Installation and User Manual Publication No. MN05001001E New Important Notice Please Read The product discussed in this literature
More informationIntelligent Technologies (IT.) Motor Control Centers Product Focus Designed Specifically for the Power Generation Industry
Intelligent Technologies (IT.) Motor Control Centers Product Focus Designed Specifically for the Power Generation Industry Once you know IT., everything changes For the most forward-looking motor control
More informationResidential Renovation Loadcenters and Accessories
Residential Renovation Loadcenters and Accessories Product Focus Replaces existing fuse boxes or loadcenters Industry Exclusive Renovation Loadcenter Quick and Clean Installation Designed specifically
More informationEaton Logic Controller. Product Focus
Eaton Logic Controller Product Focus The Eaton Logic Controller. Compact, modular, and ready to communicate. It s the cost-effective solution to machine control. Eaton Cutler-Hammer s D50 PLC broke new
More informationINSTRUCTIONS FOR THE IQ DC POWER SUPPLY INSTRUCTION LEAFLET IL E
INSTRUCTIONS FOR THE IQ DC POWER SUPPLY INSTRUCTION LEAFLET For more information visit: www.cutler-hammer.eaton.com Effective: 7/05 IQ DC Power Supply Effective Date: 7/05 Page 1 1.0 Introduction The
More informationEZ Intelligent Relay. Product Focus
EZ Intelligent Relay Product Focus Easy operation with maximum benefits The Eaton EZ intelligent relays provide basic functions that users could only implement previously with individually installed and
More informationClink II Integrated Motor Control System
link II Integrated Motor ontrol ystem Product ocus Optimising plant performance, efficiency and productivity implex and redundant configuration possible lexibility of communication protocols to higher
More informationepro Canvas epro Canvas TM (Catalog No. CANVAS)
epro Canvas TM (Catalog No. CANVAS) Product Focus Configuration Software for PanelMate epro ES/PS Easy to Use Collaborative Capabilities Innovation with Migration SM epro Canvas Creation Creative Expression
More informationIntelligent Technologies
Intelligent Technologies DeviceNet Starter Network Adapter Product (D77B-DSNAP) Installation and User Manual Publication No. MN05004001E Supersedes February 2002 Important Notice Please Read The product
More informationQCPort Cover Control Trouble Shooting Guide
QCPort Cover Control Trouble Shooting Guide Technical Document Feb. 2006 Page 1 of 14 QCPort Cover Control Description Door Defeater Address/Options Bucket Latch Breaker Actuator Hasp Lock Keypad Overlay
More informationIntelligent Technologies QCPort Cover Control
Intelligent Technologies QCPort Cover Control Programmer s Manual Aug 2009 Supersedes July 2008 MN05009001E (I) For more information visit www.eaton.com Table of Contents HOW TO SET UP A SYSTEM 7 PERFORMING
More informationADDENDUM TO IB17555D INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE OF THE CUTLER-HAMMER DIGITRIP 3000 SERIES OF PROTECTIVE RELAYS
ADDENDUM TO IB17555D INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE OF THE CUTLER-HAMMER DIGITRIP 3000 SERIES OF PROTECTIVE RELAYS INSTRUCTION LEAFLET IB17555D_ADDENDUM Effective Date: 11/02
More informationPanelMate. Operator Interface. Product Focus
PanelMate Operator Interface Product Focus For Sales and Support, Contact Walker EMD Toll-free: (800) 876-4444 Tel: (203) 426-7700 Fax: (203) 426-7800 www.walkeremd.com PanelMate Operator Interface For
More informationSECTION SOLID-STATE REDUCED VOLTAGE STARTERS
SECTION 26 29 13.16 PART 1 - GENERAL 1.1 THE REQUIREMENT A. General: The CONTRACTOR shall provide solid-state reduced voltage motor starters, complete and operable, in accordance with the Contract Documents.
More informationControls Enclosed Non-Combination Starters - PESW Series
NEMA 4/4X Non Metallic Enclosure Product Features WEG offers non-reversing and non-combination NEMA-4X magnetic starter up to 75HP at 460V. Featuring components that meet IEC design standards and UL horsepower
More informationLarge Frame IEC Contactors
Large Frame IEC Contactors Bulletin 100-E PUBLIC Copyright 2017 Rockwell Automation, Inc. All Rights Reserved. 1 Changing Applications for Contactors There are fewer and fewer traditional large motor starting
More informationOVERLOAD RELAYS POWER & ACTUATION PROVEN. series
POWER & ACTUATION OVERLOAD RELAYS series Need reliable, accurate overload and phase-loss protection for your motors? c3controls Series Bimetallic Overload Relays provide unmatched protection and can be
More informationTable 1. IEC Power Control Devices. Type Description Cost Electrical Operations. Soft starters or drives that gradually start and stop motors.
IEC Power Control Devices Training Manual XT Training Module New Information March 08 Contents Description Page Overview..................... Contactors................... Overload Relays (Bimetal).......
More information1.1. Contactors and Starters... Contents Description Relays and Timers... Miniature Controls... Manual Motor Protectors. XT IEC Power Control
. Contents Description Relays and Timers......................... Miniature Controls......................... Contactors and Starters.................... Thermal Overload Relays.................... C440/XT
More informationClipper Power System Visor Series
Clipper Power System Visor Series Technical Data Supersedes TD.37B.21.T.E pages 1-8 dated October 2001 Description Page Applications.................................................. 2 General Description............................................
More informationSSW06. Soft Starters.
The is WEG s third generation Soft Starter line. The keypad, with dual display, has red LED digits which provide visibility and make programming easier. Integral bypass contacts eliminate heat dissipation
More informationSSW06. Soft Starters. Applications. Standard Features. Pumps Fans Blowers Compressors Crushers Saws Grinders Mixers.
General Information CFW10 CFW100 CFW08 CFW500 CFW700 CFW701 CFW11 EDP11 CFW11M SSW05 SSW07 GPH2 TPH2 The is WEG s third generation Soft Starter line. The keypad, with dual display, has red LED digits which
More informationEaton Frequency Inverters SVX9000 and SPX9000. Modular, compact and configurable
Eaton Frequency Inverters SVX9000 and SPX9000 Modular, compact and configurable Multiple communication protocols allow connectivity to an extensive range of automation systems. Modbus/TCP Modbus RTU Profi
More informationLM10 to MM200 Retrofit
Grid Solutions LM10 to MM200 Retrofit Replace old LM10 Motor Controller relays with the Multilin TM MM200 Motor Management System The LM10 Motor Controller (discontinued in 2013) has been replaced by new
More informationApplying branch circuit breakers and supplementary protectors in North America
Product Application AP01102005E WMZT WMZS Applying branch circuit breakers and supplementary protectors in North America Introduction Eaton offers two types of miniature circuit breakers for use in North
More informationIMS Control & EPR, We keep your motors running ABB s new control & protection devices up to 18.5 kw / 20 hp
IMS Control & EPR, 2010 01 29 We keep your motors running ABB s new control & protection devices up to 18.5 kw / 20 hp October 27, 2010 1SBC101089D0201 ABB s new control and protection devices Up to 18.5
More informationTeSys IEC Contactors and Overload Relays
TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the
More informationE1 Plus Electronic Overload Relay
ROCKWELL AUTOMATION PROCUREMENT SPECIFICATION PROCUREMENT SPECIFICATION E1 Plus NOTICE: The specification guidelines in this document are intended to aid in the specification of products. Specific installations
More informationWMS SUPPLEMENTARY PROTECTORS
WMS Supplementary Protectors Overview WMS SUPPLEMENTARY PROTECTORS Product Specification The WMS Supplementary Protector is a dual-rated product for both AC and DC supplies, in accordance with UL 1077
More informationMetering Devices, Protective Relays, Software and Connectivity. Pre-Wired Control Power, Voltage and CT Inputs
.3 Features and Benefits Saves installation time and cost One part number to order; no need to worry that any part has been left out Pick the meter or meters you need as it is designed to fit various Eaton
More informationC E R T I F I C A T E O F C O M P L I A N C E
Issued to: This is to certify that representative samples of SIEMENS AG DF CP R&D VC 2 WERNER-VON-SIEMENS-STRASSE 48 92224 AMBERG, GERMANY MOTOR CONTROLLERS, MANUAL (See following page for additional information.)
More informationOperating comfort redefined Frequency Inverters M-MAX
Operating comfort redefined Frequency Inverters M-MAX The complete range of contac tors, efficient motor starters and variable speed drives for the motor circuit. New simple to install solutions based
More informationInnovations in the Sirius Modular System for greater efficiency in Industrial Controls and in control cabinet construction
Eckard Eberle, Head of the Control Components Business Segment Siemens AG, Nuremberg International Trade Press Conference held on 24 November 2009 in Nuremberg Innovations in the Sirius Modular System
More informationS811 Industrial Network Integration Guide
S811 Industrial Network Integration Guide Technical Document August 2006 Page 1 of 6 Table of Contents Table of Contents...2 Supporting Documentation...2 Overview...3 Commissioning the System...5 Default
More informationModular and Scalable Power Converters in the UPS Industry
A-PDF Split DEMO : Purchase from www.a-pdf.com to remove the watermark Modular and Scalable Power Converters in the Industry Ian Wallace Eaton Corporation, Innovation Center 1 Eaton Overview Eaton Electric
More informationDigitrip 520MC with Maintenance Mode
Digitrip 520MC with Maintenance Mode Effective May 2006 I.S 70C1454 Supplement to I.L. 70C1037 FIGURE 1. Digitrip 520MC with ARMs in Magnum Circuit Breaker Table of Contents 1.0 General... 2 2.0 Maintenance
More informationJK Series POWER DISTRIBUTION. Solid State Starters Medium Voltage A
POWER DISTRIBUTION JK Series Solid State Starters Medium Voltage 200-400-600-720A SOLID STATE STARTER JKSSS4+ Series The JKSSS Series of motor starter is the result of extensive research and development.
More informationAllen-Bradley Bulletin 100 Contactors
Allen-Bradley Bulletin 100 Contactors An integrated portfolio of IEC Contactors that save panel-space and energy Features and Benefits: Direct-on-line and reversing contactors Built-in surge suppression
More information1. Installation DEVICENET INTERFACE. Install the DeviceNet Interface using the following procedure:
PIM-DN-01 DeviceNet Interface 1. Installation Install the DeviceNet Interface using the following procedure: 1. Remove control power and mains supply from the soft starter. 2. Attach the DeviceNet Interface
More informationSmartWire-DT In panel and on machine wiring solutions. Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators
SmartWire-DT In panel and on machine wiring solutions Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators SmartWire-DT Changing the way panels... Reduce cost throughout
More informationMODBUS TCP MODULE INSTRUCTIONS. for use with WSIQ2/WSE
INSTRUCTIONS MODBUS TCP MODULE for use with WSIQ2/WSE WorldWide Electric Corporation Phone: 1-800-808-2131 Fax: 1-800-711-1616 www.worldwideelectric.net Product Compatibility This communications module
More informationPow-R-Command Human Machine Interfaces. Table of Contents: July Technical Data
July 2002 Pow-R-Command 100 - Human Machine Interfaces Technical Data Table of Contents: Pow-R-Command 100 System General 2 What is a Human Machine Interface (HMI) 2 HMI s and Pow-R-Command 100 Systems
More informationSelection Guide. Control Circuit and Load Protection. Allen-Bradley 1489-M2C020
Selection Guide Control Circuit and Load Protection Circuit Protection Portfolio 1489-M Circuit Breakers Approved for branch circuit protection in the United States and Canada, and certified as Miniature
More informationMotor Protection Solutions. Bulletins 193, 592, 809S, 813S, 814S, 817S and 825-P
Motor Protection Solutions Bulletins 193, 592, 809S, 813S, 814S, 817S and 825-P Motor Protection Solution Protection, Warning, Diagnostics and Control MachineAlert Monitoring Relays Bulletins 809S, 813S,
More informationObserve all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning.
MCD DeviceNet Module Instructions Important User Information INSTALLATION INSTRUCTIONS: MCD DEVICENET MODULE Order Code: 175G9002 1. Important User Information Observe all necessary safety precautions
More informationEaton Logic Controller DeviceNet (ELC-CODNET)
3 2 3 2 7 8 7 8 Eaton Logic Controller DeviceNet (ELC-CODNET) Instruction Manual 4 5 6 5 0 0 9 4 6 9 ELC-CODNET Pub. No. MN05003005E For more information visit: www.eatonelectrical.com Company Information
More informationBT300 HVAC Drives Electronic Bypass (E-Bypass) Options
BT300 HVAC Drives Electronic Bypass (E-Bypass) Options Description The BT300 Electronic Bypass (E-Bypass) Options are companion packages for the family of BT300 Variable Frequency Drives (VFDs). For information
More informationHow to Control and Monitor a C441 Motor Insight via DeviceNet
Application of DeviceNet and Motor Insight How to Control and Monitor a C441 Motor Insight via DeviceNet Application: The purpose of this application example is to demonstrate how to control and monitor
More informationMicroVersaTrip Plus & MicroVersaTrip PM Conversion Kits for Westinghouse Power Circuit Breakers
MicroVersaTrip Plus & MicroVersaTrip PM Conversion Kits for Westinghouse Power Circuit Breakers Easily replace electro-mechanical trip units with the latest electronic, digital trip unit technology Ensure
More informationMiniature Circuit Breakers and Supplementary Protectors. Contents
. Optimum and Efficient Protection for Every Application Product Overview Features Optimum product quality, tested reliability and safety stand for best protection of personnel, installations and plant.
More informationBulletin 280/281 ArmorStart Distributed Motor Controller Overview
Overview 1 2 3 5 6 7 8 9 10 11 12 13 The Bulletin 280/281 ArmorStart Distributed Motor Controller is an integrated, pre-engineered, starter for full-voltage and reversing applications. The ArmorStart offers
More informationMP-4000 motor protection. Protection, control and diagnostics
MP-4000 motor protection Protection, control and diagnostics Multi-function motor protection Introducing Eaton s MP-4000 motor protection relay Eaton s MP-4000 motor protective relay combines all the features
More informationSmartWire-DT In-panel and on-machine wiring solutions. Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators
In-panel and on-machine wiring solutions Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators Changing the way panels... Reduce cost throughout the value chain. T
More informationSIRIUS Overload Relays. SIRIUS 3RB24 Solid-State Overload Relays with Complete Starter Functionality via IO-Link
Integrated Motor Protection for High-Feature Applications SIRIUS 3RB24 Solid-State Overload Relays with Complete Starter Functionality via IO-Link SIRIUS Overload Relays www.siemens.com/sirius SIRIUS 3RB24
More informationIt is the installer's responsibility to follow all instructions in this manual and to follow correct electrical practice.
Important User Information User Manual: MCD Profibus Module Order Code: 175G9001 1. Important User Information Observe all necessary safety precautions when controlling the soft starter remotely. Alert
More informationLine A. Inverse parallel scrs. Load a FUSION. Line B SCR POWER. O delta CONTROLLERS. Line c. inverse parallel scrs. Load C. FUSION Brochure Rev 3.
Line A Inverse parallel scrs Load a Line B FUSION SCR POWER O delta CONTROLLERS Line c inverse parallel scrs Load C FEATURES Auto-Ranging Input Voltage 24-600 VAC, 45-65 Hz AC or DC Output AC Models: 50-1200
More informationObserve all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning.
MCD Profibus Module Instructions Important User Information Installation Instruction: MCD Profibus Module Order Code: 175G9001 1. Important User Information Observe all necessary safety precautions when
More information24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD
United States 24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Features and Specifications Approvals: IEC 60947-2 Rated
More informationHow to control and monitor up to 16 Motor Insight motor protection relays via an HMi and Modbus serial
Application The purpose of this application example is to demonstrate how to use the HMi electronic operator interface family to control and monitor up to 16 Motor InsightT motor protection relays via
More informationEaton Logic Controller (ELC)
Eaton Logic Controller (ELC) The Eaton Logic Controller. Compact, modular, and ready to communicate. It s the cost-effective solution to machine control. The Eaton Logic Controller (ELC) puts sophisticated
More informationOverload Relays. 3RB2 Solid-State Overload Relays. 3RB20, 3RB21 for standard applications. 5/48 Siemens LV Overview
Overload Relays Siemens AG 2009 Overview 1 2 2 (1)Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors and soft starters, these connecting
More informationProfinet Module. User Manual. Contents
User Manual Contents 1 Important User Information... 2 2 Installation... 3 3 Connection... 4 4 Device Configuration... 5 5 Operation... 7 6 Packet Structures... 8 7 Network Design... 16 8 Specifications...
More informationDeviceNet Module. User Manual. 1 Important User Information. 2 Installation
User Manual 1 Important User Information Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery may start without warning. It is the installer's
More informationMULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors
B Curve NC100H Supplementary Protectors Rating 1P 2P 3P 4P 80 MG27164 MG27175 MG27186 MG27197 MULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors C Curve NC100H Supplementary Protectors
More informationSeries CA7 Contactors
Series Rugged, space saving and modular Sprecher + Schuh s newest contactor for applications up to 6HP Over years of design experience has produced Sprecher + Schuh s seventh generation contactor line.
More informationEthernet/IP Module. User Manual. Contents
User Manual Contents 1 Important User Information... 2 2 Installation... 3 3 Connection... 4 4 Device Configuration... 5 5 Operation... 8 6 Packet Structures... 9 7 Network Design... 18 8 Specifications...
More informationTechnical Data and Specifications. Table 1. LCX9000 Specifications. Drive Efficiency > 95% Power Factor (Displacement).96
LCX9000 Liquid Cooled Adjustable Frequency Drive Technical Data November 2005 New Information Features and Benefits Compact size and low heat transfer rates allow enclosure size to be greatly reduced,
More informationSMARTSTART MOTOR STARTERS
SMARTSTART MOTOR STARTERS MCG WWW.MCG-USA.COM 1 AT A GLANCE Covers all line voltages from 200-600V AC, single or three phase Transformer supplies a 24V AC coil voltage, no matter the line voltage 12V AC/DC
More informationSiemens AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE AMBERG, GERMANY
Issued to: Siemens AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE 48 92220 AMBERG, GERMANY This is to certify that Auxiliary Devices representative samples of 3UF70 followed by 0 or 1 followed by 0
More informationDigistart. Soft starters for 3 phase induction motors 7.5 to 800kW (18 to 1600A) 200V, 400V, 575V, 690V
Digistart Soft starters for 3 phase induction motors 7.5 to 800kW (18 to 1600A) 200V, 400V, 575V, 690V Digistart Digistart is Control Techniques flexible soft starter range for motor control and protection
More informationQUICK REFERENCE GUIDE
acknowledges changed values, fault history, and is pressed to enter program resets starts the motor when the panel is the stops the motor when the panel is the - and I/O CONNECTIONS SCREEN DISPLAYS QUICK
More information- 15G0078B110 - PROFIBUS MODULE INSTRUCTIONS FOR ASAC-0/ASAC-1/ASAB
- 5G0078B0 - PROFIBUS MODULE INSTRUCTIONS FOR ASAC-0/ASAC-/ASAB Issued on 5/06/2 R. 0 This manual is integrant and essential to the product. Carefully read the instructions contained herein as they provide
More informationCopyright: December 2017 Nidec Issue: E
General Information The manufacturer accepts no liability for any consequences resulting from inappropriate, negligent or incorrect installation or adjustment of the optional parameters of the equipment
More informationSIRIUS 3RB24 Solid-State Overload Relays with Complete Starter Functionality via IO-Link
SIRIUS 3RB24 Solid-State Overload Relays with Complete Starter Functionality via IO-Link Integrated Motor Protection for High-Feature Applications siemens.com/sirius Answers for industry. SIRIUS 3RB24
More informationMetering module NZM-XMC
Metering module NZM-XMC Recording and optimising energy Product Information Metering module NZM-XMC Metering and communication module for energy distribution and motor control centres Recording energy
More informationABB Industrial Systems Inc. Standard Drives. ACH500-06E Effective 6/1/95
Part 1 - GENERAL ASEA BROWN BOVERI ABB Industrial Systems Inc. Standard Drives ACH500-06E Effective 6/1/95 Sample Specification for Adjustable Frequency Drives (2 to 400 HP) for Variable Torque Applications
More informationMCD 200 MCD 500. Remove the Profibus Module using the following procedure: 1. Remove power from the module.
Installation INSTALLATION INSTRUCTIONS: MCD PROFIBUS MODULE Order Code: 175G9001 1. Installation 1. Remove control power and mains supply from the soft starter. 2. Attach the module to the soft starter
More informationEasy, efficient and always up to date the SIRIUS modular system
Easy, efficient and always up to date the SIRIUS modular system siemens.com/sirius Easy, efficient and always up to date, that s how industrial controls can be! Switching Protecting Starting Monitoring
More information- 15G0078B120 - DEVICENET MODULE INSTRUCTIONS FOR ASAC-0/ASAC-1/ASAB
- 5G0078B0 - DEVICENET MODULE INSTRUCTIONS FOR ASAC-0/ASAC-/ASAB Issued on 5/06/ R. 0 This manual is integrant and essential to the product. Carefully read the instructions contained herein as they provide
More informationInstructions. Modbus RTU Card (WSIQ-COM-MB)
Instructions (WSIQ-COM-MB) Contents 1 Warnings... 2 2 Important User Information... 2 3 Installation... 2 4 Operation... 3 5... 4 6 Specifications... 15 Product Compatibility The is suitable for use with
More informationCATALOG SELECTION / PRODUCT SELECTION
catalog selection / product selection Motor Control Drives CATALOG SELECTION / PRODUCT SELECTION M-Max Machinery Drive Catalog Numbering System MMX AA D F - 0 Base Catalog Number Option Drives Phase =
More informationMonitoring Relays. SIRIUS 3UG Monitoring Relays for Stand-Alone Installation. Line monitoring. 8/62 Siemens IC Overview
Siemens AG 2010 Overview Benefits Can be used without auxiliary voltage in any network from 160 to 600 V AC worldwide thanks to wide voltage range Variably adjustable to overvoltage, undervoltage or range
More informationThe SV9000. The Comprehensive Drive Solution.
THE SV9000 SERIES The SV9000. The Comprehensive Drive Solution. Building on Cutler-Hammer s commitment to providing open, flexible industrial control solutions, the SV9000 series now offers more choices,
More informationSwitching Frequency Test Conditions (AC3/AC4/AC53-a)
Information Common to the G3J-T, G3J-S, and G3J CSM_G3J-T_G3J-S_G3J_common_DS_E_2_2 Engineering Data Load Current vs. Ambient Temperature Load current Io (A) G3J-T217BL G3J-T211BL G3J-S211BL G3J-211BL
More informationPanelMate Power Series 1700 Frequently Asked Questions
PanelMate Power Series 1700 Frequently Asked Questions 1. What are the new features and additions to the PanelMate Power Series 1700 compared to the PanelMate Power Series 1500 and to the PanelMate Power
More informationSmartstart Control Module
Smartstart TECHNOLOGY What is Smartstart? The patented Smartstart control module is an integrated, seamless solution that incorporates operator control, superior motor protection, and automation system
More informationPG Softstarter Installation Manual for 5A, 9A and 16A Controllers
PG Softstarter Installation Manual for 5A, 9A and 16A Controllers Important User Information The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many
More informationStarters. Power. Manual Motor Low Voltage Starters 600, 609, 609U, 609TU. 600 Manual Starting Switches 609 Manual Starting Switches
Starters Manual Motor Low Voltage Starters 600, 609, 609U, 609TU Compact design Undervoltage protection Manual operation with overload protection Ideal for low HP applications, up to 10 HP three phase
More informationPower Xpert C445 Motor Management Relay Cheat Sheets
SYSTEM COMPONENT REQUIREMENTS To understand the architecture and functionalities of a complete C445 Motor Management Relay system (henceforth referred to as C445), we must understand the individual components
More informationIntegrated Intelligence within Low & Medium Voltage Motor Control Centers. Copyright 2005 Rockwell Automation, Inc. All rights reserved.
Integrated Intelligence within Low & Medium Voltage Motor Control Centers 1 Consider the Following Scenario What tripped? Why did it trip? Was it preventable? How do we fix it? Is anything else going to
More informationMULTI 9 System Catalog UL Recognized C60N Supplementary Protectors
UL Recognized C60N Supplementary Protectors B Curve C60N Supplementary Protectors 1 MG24110 MG24125 MG24140 MG24155 15 MG17406 MG17436 MG17461 1.2 MG17402 MG17432 16 MG24118 MG24133 MG24148 MG24163 1.5
More informationSoftstarters. Type PSE Fieldbus Communication Fieldbus Plug DeviceNet. 1SFC132066M0201 January SFC132066M0201 1
Softstarters Type PSE Fieldbus Communication Fieldbus Plug DeviceNet 1SFC132066M0201 January 2019 1SFC132066M0201 1 1 DeviceNet DeviceNet is a digital, multi-drop network that connects and serves as a
More informationSPX 1hr product overview Eaton Corporation. All rights reserved.
SPX 1hr product overview 2012 Eaton Corporation. All rights reserved. Eaton Product Offering Machinery OEM Drives DE1, DC1, DE1, DA1, M-Max HVAC Drives H-Max 0.25HP 25HP 1HP 250HP General Purpose Industrial
More informationProtection for All Your Appliances and Electronics
Protection for All Your Appliances and Electronics How Voltage Surges Can Cause Damage in Your Home Our homes are filled with sensitive electronics. These devices are easily damaged by common power surges,
More informationIntelligent Motor Control Solutions Process Solutions Summit
Intelligent Motor Control Solutions Process Solutions Summit Roger Dorsel Power Control Area Manager 5058-CO900F 2 3 Motor Control Technologies Scalable Low Voltage & Medium Voltage Solutions Across-the-Line
More informationFUSION COMPACT. Load a. Line A. Inverse parallel scrs. Line B. Line c. inverse parallel scrs. Load C SCR POWER. O delta CONTROLLERS
Line A Inverse parallel scrs Load a Line B COMPACT SCR POWER CONTROLLERS O delta Line c inverse parallel scrs Load C 1 Compact Brochure Rev 3.51 www.ccipower.com 1-800-765-2799 FEATURES Auto-Ranging Input
More informationLean Line for the Machine
Touch Panel XV102 Solutions from Lean Connectivity to Lean Automation Lean Line for the Machine Product Information HMI/PLC XV102 with SmartWire-DT 5.7 7 widescreen 3.5 XV102 HMI/PLC Devices with Integrated
More informationInstall the DeviceNet Module using the following procedure:
Installation INSTALLATION INSTRUCTIONS: MCD DEVICENET MODULE Order Code: 175G9002 1. Installation Install the DeviceNet Module using the following procedure: 1. Remove control power and mains supply from
More informationPRODUCT PROFILE BULLETIN 193 & 592 E1 PLUS ELECTRONIC OVER LOAD RELAYS
PRODUCT PROFILE BULLETIN 193 & 592 E1 PLUS ELECTRONIC OVER LOAD RELAYS FEATURES IEC and NEMA configurations Self-Powered Phase Loss Protection Wide 5:1 Adjustment Range Over-Molded Power Connections 1
More informationEaton power management solutions Eaton. All Rights Reserved..
Eaton power management solutions 1 Eaton is a leading power management company We help the world use electrical, fluid and mechanical power more reliably, efficiently, safely and sustainably 2 The world
More information