P R O D U C T C AT A L O G U E

Size: px

Start display at page:

Download "P R O D U C T C AT A L O G U E"

Cynthia Burke
5 years ago
Views:

1 P U C T C T G U E

PHSE FIUE ES 2 3 4 5 6 9 0 2 These relays are suitable for monitoring MES Incoming 3-Phase Supply from Mains (Electricity distributionline).

PVM C PVM M2 PVM3 C2 P PFS PHS M FETUES Fixed/djustable Unbalance Settings Fixed/djustable Under Voltage/ver Voltage Settings Fixed/djustable Trip

Mounting) s with Micro Controller based design Use of SM Technology User friendly E indications rdering Instructions Family Name Name System

2 PHSE FIUE ES These relays are suitable for monitoring MES Incoming 3-Phase Supply from Mains (Electricity distributionline). eing PVSP M PHV M2 PVM M2 independent of load, they can be used for any PVSP M2 PV M2 PVM2 M2 HP/KW rating of load. PVM C PVM M2 PVM3 C2 P PFS PHS M FETUES Fixed/djustable Unbalance Settings Fixed/djustable Under Voltage/ver Voltage Settings Fixed/djustable Trip elays uilt in or External Power Supply esetting uto / Manual / emote utput Contacts: C or 2 C Choice of Enclosures (IN-ail,Plugin,Surface Mounting) s with Micro Controller based design Use of SM Technology User friendly E indications rdering Instructions Family Name Name System Supply Voltage & Frequency ux. Supply / Control Supply Voltage PTECTINS/FUNCTINS Phase Failure (Phase oss/single Phasing) Phase Sequence eversal, Voltage Unbalance, Under Voltage, ver Voltage ry un

3 PHSE FIUE ES PPF S PVSP M PVSP M2 PVM C Phase Failure elay Phase Failure elay Phase Sequence elay Phase Failure elay Phase Failure, Phase Sequence, Phase Sequence, Unbalance, Phase Unbalance, uto eset, uto eset, Sequence, Phase Sequence, C output relay C output relay uto eset, uto/manual/emote Phase Failure, Fixed Unbalance Setting, eset, djustable C output elay Unbalance setting, 2 C output relay 00-20/ /30-440V C ±20% 00-20/ /30-440V C ± 20% System 50/60Hz 50/60Hz uxiliary 00-20/ /30-440V C ±20% 00-20/ /30-440V C ± 20% uilt-in from 3-Phase uilt-in C 2 C C C Phase Sequence es es es es Phase Unbalance 40V ± 6V (fixed) 30V to 0V ± 6V (adjustable) n Phase Failure/Unbalance 3.5 Sec. ±.5 Sec 3.5 Sec. ±.5 Sec. Instant Instant For level sensing uto eset Supply Voltage utput Contacts VC. ± 20%. 3PH-3 Wire 0/220/ 30/4 VC ± 0%, 500 Hz Trip Setting (Volts) - Trip Time elay esetting Mode uto uto/manual / emote uto eset 224 gms. 25 gms. 0 gms. (pprox.) 90 gms. verall ( x W x ) 5.5 x 30 x 6 x 56.5 x 9 x 29 x 65 (pprox.) 49.5x395x6 Mounting ( x W) 6 centre to centre/35 mm rail Mounting 35 mm rail Mounting Pin Plug - In imensions (mm) ux Supply ux Supply 0 2 M M 2 3 M 2 3 N M STTE P PFS N STTE 4 PVM C PVSP M PVSP M2 U. SUPP 9 * vailable on request. Td : 2-5 Sec. Td : 2-5 Sec. Phase Fail Phase Fail 230V C (resistive) Wherever not specified Contact ating: /35 mm rail Mounting 6 2 U. SUPP ottom view N NC

PHSE FIUE ES PHV M2 PV M2 PVM M2 Phase Failure With UV/V elay Phase Failure With UV/V elay Phase Failure With UV/V elay Phase Failure, Unbalance, Phase Failure, Unbalance, Phase Failure, Unbalance,

4 PHSE FIUE ES PHV M2 PV M2 PVM M2 Phase Failure With UV/V elay Phase Failure With UV/V elay Phase Failure With UV/V elay Phase Failure, Unbalance, Phase Failure, Unbalance, Phase Failure, Unbalance, Phase Sequence, Under Voltage, Phase Sequence, Under Voltage, Phase Sequence, Under Voltage, ver Voltage, Manual reset, ver Voltage uto eset, ver Voltage, uto eset, Fixed Unbalance setting, Fixed Unbalance setting, Fixed Unbalance setting, djustable UV/V settings, djustable UV/V settings, djustable UV/V settings, 2 C utput relay 2 C utput relay 2 C utput relay Supply Voltage System 0/240/30/4/440V C± 20% 50/60Hz 0/240/30/4/440V C±20% 50/60Hz uxiliary V(Fixed) or ( ) or ( ) V C± 20% 0V (Fixed) or ( ) or ( ) V C±20% selectable 0/220/230/240/30/4/440V C±20% 2 C 2 C 2 C Phase Sequence es es es Phase Unbalance 40V± 6V (fixed) 40V±6V (fixed) 94V±6V (fixed) 0% to 95% (adjustable) 0% to 95% (adjustable) 0% to 95% (adjustable) 05% to 20% (adjustable) 05% to 20% (adjustable) 05% to 20% (adjustable) 3.5 Sec.±.5 Sec. ess than 2 Sec. for V & 2-5 Sec. for UV 3.5 Sec.±.5 Sec. 3.5 Sec.±.5 Sec. ess than 2 Sec. ess than 2 Sec. esetting Mode Manual/emote uto eset uto eset 295 gms. 290 gms. 290 gms. utput Contacts 0/220/230/240/30/4/440V C± 20% 50/60Hz Trip Setting (Volts) Under For V C Voltage For V C For 00-20V C ver For V C Voltage For V C For 00-20V C Trip Time elay n Phase Failure n UV/V imensions (mm) verall ( x W x ) 6x56.5x 6x56.5x Mounting ( x W).Wherever not specified ux Supply Contact ating: 5@230 V C /35 mm rail Mounting UV V ux Supply Unbal./ Phase Fail UV /35 mm rail Mounting V ux Supply Unbal./ Phase Fail Td : 2-5 Sec. Td : 2-5 Sec. 6x56.5x /35 mm rail Mounting UV V Unbal./ Phase Fail Td : 2-5 Sec. (resistive).*ce marked products available on request. 2 3 MT 2 3 MT 2 3 N N STTE STTE STTE PHV M2 U. SUPP U. SUPP U. SUPP PVM M2 PV M N MT

PHSE FIUE ES PHS M PVM2 M2 PVM3 C2 Phase Failure With UV/V(3-4W) Phase Failure With UV/V elay PVM M2 Phase Failure With UV/V elay Phase Failure With UV/V(3-3W) 2 3 4 5 6 Supply Voltage 9 0 2 Phase

Suitable for 3Ø-4W system, Microcontroller design, Phase Sequence, Microcontroller design, Microcontroller design, SM Technology, Under Voltage, ver Voltage, SM Technology, SM Technology, bsolute

5 PHSE FIUE ES PHS M PVM2 M2 PVM3 C2 Phase Failure With UV/V(3-4W) Phase Failure With UV/V elay PVM M2 Phase Failure With UV/V elay Phase Failure With UV/V(3-3W) Supply Voltage Phase Failure, Unbalance, Suitable for 3Ø-3W system. Suitable for 3Ø-4W system, Microcontroller design, Phase Sequence, Microcontroller design, Microcontroller design, SM Technology, Under Voltage, ver Voltage, SM Technology, SM Technology, bsolute values of UV/V settings, uto reset, Fixed Unbalance bsolute values of UV/V settings, bsolute values of UV/V settings Phase Failure, Unbalance. Phase Setting, Fixed UV/V settings, Phase Failure. Unbalance, Phase Phase Failure, Unbalance, Phase Sequence, Under voltage, ver Voltage 2 C output relay Sequence, Under Voltage, ver Voltage, Sequence, under voltage, ver Voltage uto/manual reset. djustable settings utofmanual reset, djustable settings uto/manual reset, djustable settings for Unbalance. UV/V and trip delays, for Unbalance. UV/V and trip delays, for Unbalance, UV/V and trip delays, 2 C output relay 2 C output relay 2 C output relay / / V C / / V C -25%+20% / /30I-44V C -25%+20% I / / V C -25%+20% System 20% 4-63 Hz, 4-63Hz Hz 4-63 Hz uxiliary uilt In Selectable by Front Knob uilt In (from ases) uilt In (from ases) uilt In (from ases] 2C 2C 2 C 2 C Phase Sequence es es es es Phase Unbalance 0% (fixed ) 4%-20% [Variable] 4%-20% [Variable] 4 % - 20 % [Variable] V C [Variable] 5-245V C [Variable] V C [Variable] 5-225V C [Variable] 95-5V C [Variable] 5-225V C [Variable] 5-V C [Variable] 45-65V C [Variable] 5-V C [Variable] V C [Variable] V C [Variable] V C [Variable] Vdtage For V C V G [Variable] 0-0V C [Variable] V C [Variable] For 00-20V C 05-5V C [Variable] 60-0V C [Variable] 05-5V C [Variable] utput Contacts Trip Setting (Volts) Under For V C Voltage For V C 5% of system supply (Fixed) For 00-20V C ver For V C 20% of system supply (Fixed) Trip Time elay n Phase Sequence 2-5 Sec. U/SP Instant Instant Instant n SP/UV/V ess than 2 Sec.UV/V,Instant P To 0 Sec_ [Variable) To 0 Sec. [Variable] To 0 Sec. [Variable] esetting Mode uto uto/ Manual eset (External NC Push uttons) uto/ Manual eset (External NC Push uttons) uto/ Manual eset [Selectable] 0 gms. 92 gms. 0 gms. gms (pprox.) verall ( x W x ) 5.5x30x 6x56.5x 6x56.5x Mounting ( x W) 6 centre to centre/35 mm rail Mounting 35 mm ail Mounting imensions (mm) " Wherever not specified UV V V Unbalance / Phase fail N UV UV N MNU ESET P MNU ESET P PVM3 C2 PHS M PVM M2 PVM2 M2 4 V Td : -0 Sec. Td : -0 Sec. 3 (resistive) Unbalance / Phase fail Td : -0 Sec. Td : -0 Sec. Td : -0 Sec. Td : -0 Sec V C Unbalance / Phase fail Td : 3.5 Sec. Contact ating /35 mm rail Mounting V Unbalance / Phase fail /35 mm rail Mounting UV

MNITING ES These relays are best suitable for monitoring balanced or unbalanced supplies, either of Single Phase, 3Phase 3Wire or 3Phase 4Wire loads powered by Generators, UPS, Stabilizers,

6 MNITING ES These relays are best suitable for monitoring balanced or unbalanced supplies, either of Single Phase, 3Phase 3Wire or 3Phase 4Wire loads powered by Generators, UPS, Stabilizers, Inverters, or Mains (by Electricity oards / Utilities); in MF Panels, PCCs, istribution boards and for power monitoring MES PVC M PUVT M PVCT M2 PUVF M PVCF M2 PCS M PVCT M2 PCT M of individual loads / motors / pumps. FETUES Fixed/adjustable under/ver trip settings for parameters. Fixed/adjustable trip delays and Power n delays uilt-in or external power supply esetting -uto or Manual utput contacts : C or 2 C Choice of enclosures (IN-ail) s with Micro-Controller based design rdering Instructions Use of SM Technology User-friendly E indications Family Name Name System Supply Voltage & Frequency ux. Supply/Control PTECTINS/FUNCTINS Under/ver Voltage, Under/ver Current Supply voltage Current input ( or 5) 5

VTGE MNITING ES PVC M PVCT M2 PVCF M2 Phase Voltage Monitoring elay Voltage Monitoring elay,3-3w Voltage Monitoring elay,3-4w Single Phase Under & 3-Phase 3-Wire Under& ver voltage 3-Phase 4-Wire

N delay, voltage settings, adjustable trip delay & N delay, 2 C output relay 2 C output relay 2 C output relay System Supply 220/ 230/240 VC (+20%-30%), 50/60 Hz±3% 0/240/30/4/440 V C +20%, -25%

7 VTGE MNITING ES PVC M PVCT M2 PVCF M2 Phase Voltage Monitoring elay Voltage Monitoring elay,3-3w Voltage Monitoring elay,3-4w Single Phase Under & 3-Phase 3-Wire Under& ver voltage 3-Phase 4-Wire Under & ver voltage ver voltage, uto eset, uto/manual eset, uto/manual eset, djustable Under / ver djustable Under/ver voltage settings, djustable Under/ver voltage settings, adjustable trip delay & N delay, voltage settings, adjustable trip delay & N delay, 2 C output relay 2 C output relay 2 C output relay System Supply 220/ 230/240 VC (+20%-30%), 50/60 Hz±3% 0/240/30/4/440 V C +20%, -25% 50/60Hz utput elay Contact 2 C 2 C 2 C Under Voltage 5-95% [Variable] of set value 5-95% [Variable] of set value 5-95% [Variable] of set value ver Voltage 05-20% [Variable] of set value 05-20% [Variable] of set value 05-20% [Variable] of set value 2-5 Sec. (Fixed) (UV/V) -0 Sec. (adjustable) -0 Sec. (adjustable) -0 Sec. (adjustable) -0 Sec. (adjustable) 0/240/30/4/440 VC +20%,-25% 50/6Hz Trip Setting Trip Time elay Power on elay eset uto eset uto/manual uto/manual 0 gms. 29 gms. 25 gms. verall ( x W x ) 5.5x30x 6 x 56.5 x 6 x 56.5 x Mounting imensions (mm) " Wherever not specified Contact ating: 230 VC (resistive) 6 mm centre to centre/35 mm rail mounting /35 mm rail mounting /35 mm rail mounting V SET V ESET Ph N V SET V ESET UV ESET UV SET T 2 to 5sec. T UV ESET UV SET 2 3 N T to 0sec. T T on to 0sec. N N PVC M 2 3 PVC M 9 N PVCT M2 PVCF M2 /M INK /M INK N

8 VTGE MNITING ES PUVT M PVCT M2 Voltage Monitoring elay PUVF M Voltage Monitoring elay Voltage Monitoring elay 3-Phase 3-Wire and 3-Phase 4-Wire (selectable) Under & ver Voltage, Microcontroller based design, uto/manual eset, djustable underiover voltage settings, bsolute values for UV/V, adjustable trip delay & N delay, 2 C output relay (or selectable IC for UV, C for V) Programming Mode, Failsafe-non-faiIsafe selectable 3-Phase 4-Wire Under uto eset, djustable Under Voltage settings, adjustable trip delay & N delay, C output relay 3-Phase 3-Wire Under uto eset, djustable Under Voltage settings, adjustable trip delay & N delay, I C output relay System Supply 00-20/ / VC-25% +20%, 4-63Hz 0/220/230/240/30/4/440 V C +20%,-25% 50/60HZ utput elay Contact C+ C/2C Trip Setting Under Voltage Ph Ph Setting: C For V G V C (Variable) For V C 5-225V C (Variable) For 00-20V C 5-V C (Variable) 0/220/230/240/30/4/440 V C +20%,-25% 50/60HZ C 5-95% [Variable] of set value 5-95% [Variable] of set value Ph N Setting: ver Voltage For V C 5-245V C (Variable) For V C 95-5V C (Variable) For 00-20V C 45-65V C (Variable) Ph Ph Setting: For V C V C (Variable) For V C V C (Variable) For 00-20V G Ph N Setting: For V C 05-5V C (Variable) V C (Variable) 0-0V C (Variable) For V C For 00-20V C 60-0V C (Variable) Trip Time elay -0 Sec. (Variable) UV/V/NF Power on elay -0 Sec. (Variable) -0 Sec_ (adjustable) 3.5 Sec.±.5 Sec. (Fixed) -0 Sec_ (adjustable) 3.5 Sec.±.5 Sec. (Fixed) eset uto/ Manual eset uto uto 0 gms (pprox.) 224 gms. 224 gms. verall ( x W x ) 6 x 56.5 x 5.5 x 30 x 5.5 x 30 x Mounting 6 centre to centre/35 mm rail Mounting 6 centre to centre/35 mm rail Mounting imensions (mm) " Wherever not specified Contact ating: 230 VC (resistive) 5 mm rail mounting V SET V ESET N UV ESET UV SET T to 0sec. T T on to 0sec. N N N PUVT M PUVF M N 9 3 or 4 Wire selection link 9 PVCT M2

CUENT MNITING ES PCS M PCT M Phase ver Current elay Single phase over current, uto reset, Input or 5 through CT, djustable over current trip settings, djustable trip delay, C output relay Current

Input mp/5 mp (Secondary) CT or 250/ 500 m utput Contact C Trip Setting (Volts) EF Trip Setting - Under Current ver Current 50% -0% (adjustable) of CT sec Power n elay 3.5 Sec.

9 CUENT MNITING ES PCS M PCT M Phase ver Current elay Single phase over current, uto reset, Input or 5 through CT, djustable over current trip settings, djustable trip delay, C output relay Current sensor suitable for full, load motor current of.25, 2.5, 5, 0, To be used with prok dvs relays only. System 0-20/ /30-440V c±20%, uxiliary 2V C/24/30V C±0% Supply Voltage Ext. Input mp/5 mp (Secondary) CT or 250/ 500 m utput Contact C Trip Setting (Volts) EF Trip Setting - Under Current ver Current 50% -0% (adjustable) of CT sec Power n elay 3.5 Sec.±.5 Sec. (fixed) Trip Time elay -0 Sec. (adjustable) esetting uto 5 gms. 220 gms. verall ( x W x ) 5.5 x 30 x 5.5x30x Mounting(x W) 6 centre to centre/35 mm rail Mounting 6 centre to centre/35 mm rail Mounting imensions (mm) " Wherever not specified Contact ating: ux. Supply C SetPoint C eset 5@23VC (resistive) Selection Chart for PCT M Current Input HP T N 2 to 5 sec. N 2 3 STTE PCS M N U. SUPP KP <0.5 <0.5 Td to 0 sec. 9 mp PCT M PCT M/.25 <.5 < PCT M/2.5 <3 < PCT M/5 <6 <4.5 PCT M/0 4-0

10 MT/PUMP PTECTIN ES These relays are useful for protection of MES 3-phase C induction motors against various hazards. With their unique advantages they PMP M2 eliminate use of athermal/bimetal relay PSPG M2 for motor protection.eing current sensing, PCT C2 they are to beselected according to motor rating and areavailable for practically all ranges of motors.these relays are ideally suitable for ir-conditioning Compressor FETUES motor protection,as also for motors in machines, conveyors,cranes/hoists and lifts, and for pumps.etc. Fixed/adjustable unbalance settings Fixed/adjustable settings for Under/ver Voltage and ver load Fixed/adjustable trip delays esetting uto or Manual utput contacts : C or 2 C Choice of enclosures (IN-ail) s with Micro-Controller based design rdering Instructions Family Name Use of SM Technology User-friendly E indications Name System Supply Voltage & frequency ux. Supply/Control supply voltage Motor/Pump rating (HP/KW) & duty verload characteristics required PTECTINS/FUNCTINS Phase Failure (Phase oss/single Phasing), Phase Sequence reversal, Voltage Unbalance, Under Voltage, ver Voltage verload Protection as per motor IMT characteristics No-load/dry running ver-current/locked rotor 9

11 MT/PUMP PTECTIN ES PMP M2 PCT C2 PSPG M2 verload Protection elay With Phase Failure r y un & verload Protection elay With Phase Failure Current Sensor Phase Failure, Unbalance, Phase Phase Failure, Unbalance, Current sensor suitable sequence and overloading Phase sequence, for full load motor current uto/manual eset, verloading & ry running of.25, 2.5, 5,, djustable current trip settings, uto/manual eset, 20, 40 & 0 selectable characteristics, djustable current trip settings, To be used with C/2C output relay selectable overload characteristics prok dvs relays only. C/2C output relay Supply Voltage System uxiliary utput elay Contact Input 00-20/ / V C±20% 00-20/ / V C±20% 0/240/30/4V C/C/ 24V C/C±20%.50/60 Hz 0/240/30/4/440V C/C/24V C/C±20%, 50/60 Hz N. C (2 C) From (PCT C2) C (2 C) 3-wire Terminals utput 50% of motor Current ±0% From (PCT C2) Trip Setting 50% of motor Current Under current (ry running) 50%/5% of set current verload bove 20% of set Current (IMT) bove 20% of set Current (IMT) UV/V Phase to phase unbalance Trip Time elay n Phase Failure 5.5 Sec.±.5 Sec. 5.5 Sec. ±.5 Sec. For verloading s per selectable inverse time Characteristics s per selectable inverse time Characteristics 2 /5 Sec.(Selectable) 0 / / 20 Sec. (optional) 2 /5 Sec.(Selectable) 0 / / 20 Sec. (optional) N. uto /Manual / emote uto / Manual /emote verall ( x W x ) 6x56.5x 6x56.5x 9 x35.5x60 Mounting ( x W) 35 mm ail Mounting UV/V P esetting imensions (mm) /35 mm rail Mounting 24 gms. 20 gms. 20 % 00 % 0 % 0% / s per IMT T s per IMT T = / Trip elay T2 = SP Trip elay ry run ink PMP M2 /M ink PSPG M2 PCT C2 U. SUPP ink at - for IN UT T T = / Trip elay T2 = SP / Trip elay U. SUPP / T2 T T2 4 to sec. / / / 3 ph /M ink PCT C2 IN UT 2 or 5 Sec. IMT IN UT curve selection 0 IN UT KW <0.5 <0.5 Phase Fail 0 % 0% / T Selection Chart for PCT C2 HP 20 % 00 % Phase Fail / / / 3 ph 0 gms. / Motor 00 % Current 600 % 400 % (%) 200 % / Motor 00 % Current 600 % 400 % (%) 200 % " Wherever not specified Contact ating: 230 VC (resistive) /35 mm rail Mounting / T2 4 to sec. mp PCT C PCT C2/.25 <.5 < PCT C2/2.5 <3 < PCT C2/5 <6 < PCT C2/0 <2.5 < PCT C2/20 <30 < PCT C2/40 <60 <45 PCT C2/0 32-0

12 IQUI EVE CNTES These are suitable for conductive liquids like water and for non-conductive liquids like iesel/il. s for either one level monitoring or two level monitoring. MES PWC M FETUES Can be used for potable water, water with impurities and for diesel/oil Cable size & length no restriction for water level monitoring Suitable for variety of electrodes rdering Instructions Family Name ptical sensing for diesel/oil level monitoring Choice of enclosures (IN-ail) Name System Supply Voltage ux_ Supply/Control supply voltage Type of liquid & its specifications FUNCTINS evel monitoring of conductive and non-conductive liquids ne level or two level monitoring ne tank or two tank level monitoring

EVE CNTES-CNUCTIVE IQUIS PWC M Water evel Control elay Two evel Single Tank Single tank - 2 level control relay, suitable for conductive liquids, sensitivity adjustment, C output relay.

13 EVE CNTES-CNUCTIVE IQUIS PWC M Water evel Control elay Two evel Single Tank Single tank - 2 level control relay, suitable for conductive liquids, sensitivity adjustment, C output relay. lso can be used as moisture control relay. uxiliary Supply utput Contacts 24 VC/C/00-20/ / V C ± 0%, 50 / 60 Hz C Input Sensors 3 Electrodes Sensitivity K Ω- 200 KΩ (adjustable) Trip Time elay ess than Sec. Unit 2 gms. Sensor (each) 50 gms. imensions (mm) Unit verall ( x W x ) 5.5 x 30 x Mounting ( x W) 6 mm centre to centre /35 mm rail mounting verall 24 (ia) x 6 () Sensor (mm) Wherever not specified ux Supply Contact ating: 230 V C p3 p2 p Suction (Source) Tank Water evel p3 p2 p p3 p2 p p3 p2 p p3 p2 p (resistive) M M2 STTE Moisture control relay connection: Short & 3 terminals. Connect sensor wires at & 2 terminals. 2 3 PWC M U. SUPP 9 P3 P2 2 MT M3 P ink foruto N operation

14 PUCTS F GI SECT Prok dv s offers a range of products for protection of water pumps used by farmers. These are primarily to monitor incoming 3phase supply for Single Phasing, everse Phasing and unbalanced supply and stop the pump in case of any fault. dditional features in some models include auto restarting.the products are specifically produced formarketing and use in India only. MES PVSP2 PVSP3 FETUES Monitor incoming 3-phase supply s with pre-wired connections Easy to fit inside most motor starters Switch foruto-manual operations Switch provision either built-in or external rdering Instructions djustable on time delay ll protections in auto & manualmodes Family Name Name System Supply Voltage ux. Supply / Control supply voltage uilt-in timer for star-delta operation PTECTINS/FUNCTINS Single Phasing everse Phasing Motor rating (HP / KW) Unbalanced supply Motor applications ry running n elay to avoid immediate restarting of pumps during auto mode

PUCTS F GISECT PVSP2 PVSP3 Smallest size of single Phasing preventor Single phasing, everse Phasing, Unbalanced supply uto reset, N output contact Suitable for any HP/kW rating monoblock pumps Single

15 PUCTS F GISECT PVSP2 PVSP3 Smallest size of single Phasing preventor Single phasing, everse Phasing, Unbalanced supply uto reset, N output contact Suitable for any HP/kW rating monoblock pumps Single Phasing, everse Phasing, Unbalanced supply, uto reset, N utput Contact,Suitable for any HP/kW rating monoblock pumps.pre-wired terminals for easy connections Supply Voltage 4 VC ± 20%, 50 Hz ± 3% 4 VC ± 20%, 50 Hz ± 3% utput elay Contact N N utput Contact ating 5 mp, 240 VC (ESISTIVE) 5 mp, 240 VC (ESISTIVE) Unbalance Trip Setting 45V± V 45V± V 3.5 sec. ±.5 sec. 3.5 sec. ±.5 sec. ry un Setting n Time elay Star-elta Changeover esetting uto eset uto eset uto Switch Enclosure HIP moulded, with Nylon connector strip HIP moulded imensions (mm) verall (H xwx) 02.5x65.5x x65.5x43 9 x4 9 x4 Mounting Panel Mounting Panel Mounting 260gms 255gms Trip Time elay For unbalance Time elay Mounting evel sensor Quantity imensions perating Conditions Temperature -5 T T+ 60 Humidity Upto 95% h Upto 95% h emove this link E EW UE G G

PRICE LIST WITH EFFECT FROM 1st September 2016 ISSUE NO. 29

PRICE LIST WITH EFFECT FROM 1st September 2016 ISSUE NO. 29 PRIME ENTERPRISES 10, TAVAWALA BLDG., 1ST FLOOR, 147, LOHAR CHAWL,MUMBAI- 400002 TEL NO. : - 22065122 TELEFAX: - 22080151 E-MAIL: info@centralelectro.in