Application Note AN-428
|
|
|
- Rhoda Greer
- 5 years ago
- Views:
Transcription
1 EVALUATION BOARD GUIDE FOR SUPERJET TRANSCEIVERS, LINE INTERFACE UNITS AND ANALOG FRONT END DEVICES Application Note AN-428 As a part of IDT s dedicated application support for telecommunication products, IDT offers advanced hardware development tools including evaluation boards for IDT s industry leading T1/J1/E1 Transceivers, Line Interface Units (LIU), High-Density LIUs and Analog Front End (AFE) devices. The following sections will provide an overview of IDT s evaluation boards for all these product families. 1 IDT T1/J1/E1 TRANSCEIVER, LIU, HIGH- DENSITY LIU AND AFE PRODUCTS OVER- VIEW IDT offers a wide range of product solutions for T1/J1/E1 termination and framing functions. The SuperJET T1/J1/E1 Transceiver family offers the industry s first Octal and Dual Transceiver options in a complete family of 8/4/2 and 1 channel products. IDT also offers a family of High-Density T1/J1/E1 short haul LIUs which consist of 28, 21 and 16 channels, including an 8 channel option. In addition to this, IDT provides a complete line of T1/J1/E1 Line Interface Units with 8/4/2 and 1 channel options for long haul, short haul, T1/ J1/E1 or E1 only applications. Analog Front End (AFE) devices are also available. These devices support T1/E1 modes and only perform the data slicing of the incoming line signal. An encoded dual rail RZ signal is output on the system side for external clock and data recovery. Besides many other advanced features, the SuperJET Transceivers and most of the Line Interface Units offer software selectable internal impedance. This allows the use of a common external termination for T1, J1 or E1 applications and to address all international markets with a single Bill of Materials (BOM). Hitless Protection Switching (HPS) for 1:1 and 1+1 redundancy schemes are also supported for all devices. 2 EVALUATION BOARD SUMMARY The available evaluation boards are advanced hardware development tools to evaluate IDT s industry leading T1/J1/E1 Transceivers, LIUs and High-Density LIUs. The devices can be evaluated in multiple modes such as T1/E1/J1 and long/short haul (where applicable). The typical evaluation kit is a complete solution and includes: 1. Evaluation board with all needed components 2. Universal V AC/DC power adapter with international plugs 3. Serial port cable 4. CD-ROM containing User s Guide Evaluation Software (GUI) Software Drivers Schematics The evaluation boards are not just an engineering hardware development tool. The advanced GUI provides users with a hierarchal view of the Software, a visual presentation of functional blocks in the device and associative menus with easy register access. For most of the products, no actual hardware is needed to use the evaluation board GUI. This allows users to easily pre-evaluate the device options, functions and features of the device. Refer to tables on the next page for a listing of available evaluation boards. For more information please contact your local sales representative. Please visit for a detailed listing of IDT sales offices, distributors and sales representatives. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. 1 September 16, Integrated Device Technology, Inc. DSC-6781/2
2 Table-1 T1/J1/E1 SuperJET Transceiver Evaluation Boards IDT SuperJET Transceiver Part Number Description Evaluation Board Part Number 82P Channel T1/J1/E1 Short/Long Haul Transceiver 82EBP P Channel T1/J1/E1 Short/Long Haul Transceiver 82EBP P Channel T1/J1/E1 Short/Long Haul Transceiver 82EBP P Channel T1/J1/E1 Short/Long Haul Transceiver 82EBP2281 Table-2 T1/J1/E1 High-Density Line Interface Unit Evaluation Boards IDT High-Density LIU Part Number Description Evaluation Board Part Number 82P Channel T1/J1/E1 Short Haul LIU 82EBP P Channel T1/J1/E1 Short Haul LIU 82EBP P Channel E1 Short Haul LIU 82EBP P Channel T1/J1/E1 Short Haul LIU 82EBP P Channel T1/J1E1 Short Haul LIU 82EBP2808 Table-3 T1/J1/E1 Line Interface Units (LIU) Evaluation Boards IDT LIU Part Number Description Evaluation Board Part Number 82V2041E 1 Channel T1/J1/E1 Short Haul LIU 82EBV V2042E 2 Channel T1/J1/E1 Short Haul LIU 82EBV V Channel T1/E1 Short Haul LIU 82EBV V2044E 4 Channel T1/J1/E1 Short Haul LIU 82EBV V Channel T1/E1 Short Haul LIU 82EBV V2048E 8 Channel T1/J1/E1 Short Haul LIU 82EBV V2048L 8 Channel T1/E1 Short Haul Analog Front End 82EBV V2051E 1 Channel E1 Short Haul LIU 82EBV V2052E 2 Channel E1 Short Haul LIU 82EBV V Channel E1 Short Haul LIU 82EBV V Channel E1 Short Haul LIU 82EBV V2058L 8 Channel E1 Short Haul Analog Front End 82EBV V Channel T1/J1/E1 Short/Long Haul LIU 82EBV V Channel T1/J1/E1 Short/Long Haul LIU 82EBV V Channel T1/J1/E1 Short/Long Haul LIU 82EBV V Channel T1/J1/E1 Short/Long Haul LIU 82EBV2088 Evaluation Board Summary 2 September 16, 2005
3 3 EVALUATION BOARD DETAILS 3.1 T1/J1/E1 HIGH-DENSITY LIU In the following paragraphs, the High-Density LIU IDT82EBP2828/ 21/16/8 and 82P2521 evaluation boards and software are described in more details. The evaluation boards of all other T1/J1/E1 products are very similar. The purpose of the evaluation board is to demonstrate the capabilities of IDT T1/J1/E1 High-Density LIUs. Each evaluation board kit comes with a Hardware and a Graphical User Interface (GUI) Software to configure the evaluation board and the device. Figure-1 shows the evaluation board Hardware. Figure-2 shows the main screen of the evaluation board Software. Figure-1 IDT82P2828 Evaluation Hardware Evaluation Board Details 3 September 16, 2005
4 Figure-2 IDT82P2828/21/16/8 and 82P2521 Evaluation Software, Main Screen 3.2 EVALUATION KIT CONTENT The evaluation board kit for the High-Density LIU will include 1 : One IDT82P2828/21/16/8/82P2521 Evaluation Board with all needed components Two IDT82P2828/21/16/8/82P2521 Evaluation Interface Boards One Evaluation GUI to control board functions One RS232C DB9 female cable One IDT82P2828/21/16/8/82P2521 Evaluation Board user s guide 29/22/17/9-link T1/E1/J1 short haul interface External power socket for AC->DC conversion (with on board voltage regulator) Microcontroller of sufficient performance to control IDT82P2828/ 21/16/8/82P GUI FUNCTION SUMMARY With the GUI, all main items of the device and the board can be configured. On some evaluation boards, hardware configuration options (jumper settings) are also available to set up the evaluation board based on specific application requirements. 1. This information is subject to change without notice. To provide easy setup of the evaluation board and portability from the validation platform to the application, register settings can be recorded and saved as a script file. A script file can also be loaded onto the GUI software to set up the evaluation board. Also the following functions can be fulfilled in the evaluation GUI: Serial port setting FPGA on board configuration Device general configuration Mode and Jitter Attenuator (JA) configuration Receive path configuration Transmit path configuration Device diagnostic dialog Interrupt configuration & status JA measurement Pattern configuration Loopback configuration Arbitrary waveform Access all registers Refer to Figure-3 to Figure-6 for some software screen examples. Evaluation Board Details 4 September 16, 2005
5 Figure-3 Interrupt Configuration and Status Figure-5 Transmit Path Figure-4 FPGA on Board Configuration Figure-6 Access All Registers CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA for SALES: or fax: for Tech Support: IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. 5
8V9705x Evaluation Board User Guide IDT Applications
APPLICATION NOTE Network Communications Division 8V9705x Evaluation Board User Guide IDT Applications October 2016 Contents Introduction... 3 Contents... 3 Requirements... 3 Quick Start... 3 Default Power-Up
BUS SWITCHES PROVIDE 5V AND 3V LOGIC CONVERSION WITH ZERO DELAY. Figure 1. 5V & 3V Logic Mixture in PC Design
BUS SWITCHES PROVIDE 5V AND 3V LOGIC CONVERSION WITH ZERO DELAY APPLICATION NOTE AN-11A ABSTRACT Battery operated computer systems, such as notebook computers, need support logic with a combination of
IDT Converting Designs from PLX PEX 8114 to IDT Tsi384. Application Note
IDT Converting Designs from PLX PEX 8114 to IDT Tsi384 Application Note August 12, 2009 6024 Silver Creek Valley Road San Jose, California 95138 Telephone: (408) 284-8200 FAX: (408) 284-3572 Printed in
IDT Converting Designs from PLX PEX8111 or PEX8112 to IDT Tsi381. Application Note
IDT Converting Designs from PLX PEX8111 or PEX8112 to IDT Tsi381 Application Note September 22, 2009 6024 Silver Creek Valley Road San Jose, California 95138 Telephone: (408) 284-8200 FAX: (408) 284-3572
ZSSC4151 Evaluation Kit Hardware Manual
Important Notes Restrictions in Use IDT s ZSSC4151 SSC Evaluation Kit, consisting of the SSC Communication Board (SSC CB), ZSSC415x/6x/7x Evaluation Board (SSC EB), Sensor Replacement Board (SSC RB), and
Figure 1. Wave Shape at an Output Port of the 2048kHz Synchronization Interface...8. Table 6. Configuration for BITS/SSU in E1 Mode...
Using 82P228x ransceivers in BIS/SSU Applications AN-1029 Application Note Contents 1. Introduction...2 2. OSCI Clock...2 3. Normal 1/E1 Mode Operation...2 3.1 Configuration of the 82P228x Registers...2
1.8V to 3.3V LVCMOS High Performance Clock Buffer Family
1.8V to 3.3V LVCMOS High Performance Clock Buffer Family 5PB11xx DATASHEET Description The 5PB11xx is a high-performance LVCMOS Clock Buffer Family. It has best-in-class Additive Phase Jitter of 50fsec
ZLED7030KIT-D1 Demo Kit Description
ZLED7030KIT-D Demo Kit Description Kit Important Notice Restrictions in Use IDT s ZLED7030KIT-D Demo Kit hardware is designed for ZLED7030 demonstration, evaluation, laboratory setup, and module development
IDT74LVC541A 3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC541A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R
IDT74LVC245A 3.3V CMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O
3.3V CMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND 5 T TOLERANT I/O IDT74LVC245A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF,
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH IDTQS32X245 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs Dual
3.3V ZERO DELAY CLOCK BUFFER
3.3V ZERO DELAY CLOCK BUFFER IDT2309A FEATURES: Phase-Lock Loop Clock Distribution 10MHz to 133MHz operating frequency Distributes one clock input to one bank of five and one bank of four outputs Separate
3.3V CMOS OCTAL BIDIRECTIONAL TRANSCEIVER
. CMOS OCTAL IDIRECTIONAL TRANSCEIVER. CMOS OCTAL IDIRECTIONAL TRANSCEIVER IDT7FCT/A FEATURES: 0. MICRON CMOS Technology ESD > 00 per MIL-STD-, Method 0; > 0 using machine model (C = 00pF, R = 0) VCC =.
LOW-VOLTAGE OCTAL BUS SWITCH
LOW-VOLTAGE OCTAL BUS ITCH IDT74CBTLV44 FEATURES: Pin-out compatible with standard '44 Logic products 5Ω A/B bi-directional switch Isolation under power-off conditions Over-voltage tolerant Latch-up performance
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH DOUBLE-WIDTH BUS SWITCH IDTQS32X2245 FEATURES: Enhanced N channel FET with no inherent diode to Vcc Dual '245 function 25Ω resistor for low noise Low propagation
ICS548A-03 LOW SKEW CLOCK INVERTER AND DIVIDER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS548A-03 Description The ICS548A-03 is a low cost, low skew, high-performance general purpose clock designed to produce a set of one output clock, one inverted output clock, and one clock divided-by-two.
FAST CMOS OCTAL BUFFER/LINE DRIVER
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT54/74FCT244T/AT/CT FEATURES: Std., A, and C grades Low input and output leakage 1µA (max.) CMOS power levels True TTL input and output compatibility: VOH = 3. (typ.)
CMOS SyncFIFO 64 x 8, 256 x 8, 512 x 8, 1,024 x 8, 2,048 x 8 and 4,096 x 8 LEAD FINISH (SnPb) ARE IN EOL PROCESS - LAST TIME BUY EXPIRES JUNE 15, 2018
CMOS SyncFIFO 64 x 8, 256 x 8, 512 x 8, 1,024 x 8, 2,048 x 8 and 4,096 x 8 LEAD FINISH (SnPb) ARE IN EOL PROCESS - LAST TIME BUY EXPIRES JUNE 15, 2018 IDT72420 IDT72200 IDT72210 IDT72220 IDT72230 IDT72240
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT IDTQS361 FEATURES: Enhanced N channel FET with no inherent diode to Vcc 5Ω bidirectional switches connect inputs to outputs
Clock Generator for PowerQUICC and PowerPC Microprocessors and
Freescale Semiconductor Technical Data Clock Generator for PowerQUICC and PowerPC Microprocessors and Microcontrollers Clock Generator for PowerQUICC and PowerPC Microprocessors and DATA SHEET Rev 1, 11/2004
ZLED7002. Toggle (Side-Step) Dual-Channel LED Driver. Datasheet. Features. Brief Description. Benefits. Available Support. Physical Characteristics
Toggle (Side-Step) Dual-Channel LED Driver ZLED7002 Datasheet Brief Description The ZLED7002 toggle (side-step) dual-channel LED driver is one of our ZLED family of LED control ICs. It operates in the
LOW-VOLTAGE 10-BIT BUS SWITCH
LOW-VOLTAGE 0-BIT BUS ITCH IDT74CBTLV84 FEATURES: 5Ω A/B bi-directional bus switch Isolation under power-off conditions Over-voltage tolerant Latch-up performance exceeds 00mA VCC =.V -.6V, Normal Range
ANTC205. Introduction
ANTC205 Introduction The JitterBlocker takes very noisy and jittery clocks and cleans out all the deterministic and excessive jitter. It can handle thousands of picoseconds of period jitter at its input
High-Performance 8-Bit Microcontrollers. Up to 8 10-Bit ADC Channels. Two 16-Bit Timers/PWM. Internal Precision Oscillator
High-Performance 8-Bit Microcontrollers Z8 Encore! 4K Series QuickTime and a BMP decompressor are needed to see this picture. Product Block Diagram 1 4 KB Watch-Dog Timer with RC Oscillator Analog UART
Bridging from PCI Express to PCI in Small-Form Factor Embedded Computing Designs
Bridging from PCI Express to PCI in Small-Form Factor Embedded Computing Designs September 22, 2009 6024 Silver Creek Valley Road San Jose, California 95138 Telephone: (408) 284-8200 FAX: (408) 284-3572
1 + 1 HITLESS PROTECTION SWITCHING WITHOUT RELAYS FOR TRANSCEIVER IDT82P2281/2/4/8. Transceiver Transceiver. Transceiver Transceiver
1 + 1 HITLESS POTETION SWITHING WITHOUT ELAYS FO TANSEIVE IDT82P2281/2/4/8 Application Note AN-511 INTODUTION In today s telecommunication systems, ensuring no traffic loss is becoming increasingly important.
QUICKSWITCH PRODUCTS 2.5V / 3.3V 20-BIT DUAL PORT, HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 20-BIT DUAL PORT, HIGH BANDWIDTH BUS SWITCH IDTQS3VH1662 FEATURES: N channel FET switches with no parasitic diode to Vcc Isolation under power-off conditions No DC path
Introduction. Why have ncxo Redundancy? Per-Input Reference Monitors (REFMON) AN-1020 Application Note. ClockMatrix on ncxo Redundancy
AN-1020 Application Note Introduction ClockMatrix provides many tools for managing timing references. It has several different modes to align output clocks, control skew, measure clocks, select clock sources,
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ACTIVE LOW ENABLES
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ACTIVE LOW ENABLES IDTQS315 FEATURES: Enhanced N channel FET with no inherent diode to Vcc Pin compatible with the 74 15 function
IDT74CBTLV3257 LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS SWITCH
LOW-VOLTAGE QUAD 2:1 MUX/DEMUX BUS ITCH LOW-VOLTAGE QUAD 2:1MUX/DEMUX BUS ITCH IDT74CBTLV3257 FEATURES: Functionally equivalent to QS3257 5Ω switch connection between two ports Isolation under power-off
ZSPM4121. Under-Voltage Load Switch for Smart Battery Management. Datasheet. Brief Description. Features. Related IDT Smart Power Products
Under-Voltage Load Switch for Smart Battery Management ZSPM4121 Datasheet Brief Description The ZSPM4121 battery management load switch can be used to protect a battery from excessive discharge. It actively
LOW-VOLTAGE 24-BIT BUS EXCHANGE SWITCH
LOW-VOLTAGE 4-BIT BUS EXCHANGE ITCH LOW-VOLTAGE 4-BIT BUS EXCHANGE ITCH IDT74CBTLV6 FEATURES: 5Ω A/B bi-directional switch Isolation Under Power-Off Conditions Over-voltage tolerant Latch-up performance
IDTQS3VH383 QUICKSWITCH PRODUCTS 2.5V/3.3V 8-BIT HIGH BANDWIDTH BUS EXCHANGE BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V/3.3V 8-BIT HIGH BANDWIDTH BUS EXCHANGE BUS SWITCH IDTQS3VH383 FEATURES: N channel FET switches with no parasitic diode to Vcc Isolation under power-off conditions No DC path to
QUICKSWITCH PRODUCTS 2.5V/3.3V 20-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V/3.3V 20-BIT HIGH BANDWIDTH BUS SWITCH IDTQS32XVH34 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or GND
T1/E1 CLOCK MULTIPLIER. Features
DATASHEET ICS548-05 Description The ICS548-05 is a low-cost, low-jitter, high-performace clock synthesizer designed to produce x16 and x24 clocks from T1 and E1 frequencies. Using IDT s patented analog/digital
CMOS Static RAM 1 Meg (128K x 8-Bit) Revolutionary Pinout
CMOS Static RAM 1 Meg (K x -Bit) Revolutionary Pinout IDT714 Features K x advanced high-speed CMOS static RAM JEDEC revolutionary pinout (center power/gnd) for reduced noise Equal access and cycle times
IDT Using the Tsi310 TM to Optimize I/O Adapter Card Designs
IDT Using the Tsi310 TM to Optimize I/O Adapter Card Designs September 19, 2009 6024 Silver Creek Valley Road San Jose, California 95138 Telephone: (408) 284-8200 FAX: (408) 284-3572 Printed in U.S.A.
APPLICATION NOTE AN 59
USING IDT74 AND IDT75 DUAL-PORT STATIC RAMs TO MATCH SYSTEM BUS WIDTHS APPLICATION NOTE AN 59 Introduction This application note describes three design approaches to accomplish bus width matching using
IDT71V124SA/HSA. 3.3V CMOS Static RAM 1 Meg (128K x 8-Bit) Center Power & Ground Pinout
33V CMOS Static RAM 1 Meg (K x -Bit) Center Power & Ground Pinout IDT71VSA/HSA Features K x advanced high-speed CMOS static RAM JEDEC revolutionary pinout (center power/gnd) for reduced noise Equal access
APPLICATION NOTE AN-265
BUS MATCHING WITH IDT FIFOs APPLICATION NOTE AN- BUS MATCHING The Bus Matching feature offered in the SuperSync II family is a powerful feature designed to eliminate external MUXes. When used in applications
3.3V CMOS 1-TO-5 CLOCK DRIVER
3. CMOS 1-TO-5 CLOCK DRIVER 3. CMOS 1-TO-5 CLOCK DRIVER IDT74FCT38075 FEATURES: Advanced CMOS Technology Guaranteed low skew < 100ps (max.) Very low duty cycle distortion< 250ps (max.) High speed propagation
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 32-BIT MULTIWIDTH BUS SWITCHES
QUICKSWITCH PRODUCTS HIGH-SPEED CMOS QUICKSWITCH 3-BIT MULTIWIDTH BUS SWITCHES IDTQS3X5 FEATURES: Enhanced N channel FET with no inherent diode to Vcc Bidirectional switches connect inputs to outputs Zero
16-Lane 16-Port PCIe Gen2 System Interconnect Switch with Non-Transparent Bridging
16-Lane 16-Port PCIe Gen2 with Non-Transparent Bridging 89HPES16NT16G2 Product Brief Device Overview The 89HPES16NT16G2 is a member of the IDT family of PCI Express ing solutions. The PES16NT16G2 is a
IDT Bridging the PCI Express Interconnect Divide Application Note
IDT Bridging the PCI Express Interconnect Divide Application Note September 22, 2009 6024 Silver Creek Valley Road San Jose, California 95138 Telephone: (408) 284-8200 FAX: (408) 284-3572 Printed in U.S.A.
IDT74LVC244A 3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O
3.3V CMOS OCTAL BUFFER/DRIVER WITH 3-STATE OUTPUTS, 5 T TOLERANT I/O IDT74LVC244A FEATURES: 0.5 MICRON CMOS Technology ESD > 200 per MIL-STD-883, Method 3015; > 20 using machine model (C = 200pF, R = 0)
User Manual for the SDAH01 Evaluation Kit for the HS3001 Humidity and Temperature Sensor. Description. Features. Kit Contents. SDAH01 Evaluation Kit
User Manual for the SDAH01 Evaluation Kit for the HS3001 Humidity and Temperature Sensor Description The SDAH01 Evaluation Kit is used to assess the HS3001 High- Performance Relative Humidity and Temperature
IDT Using the Tsi310 TM to Migrate I/O Adapters from PCI to PCI-X
IDT Using the Tsi310 TM to Migrate I/O Adapters from to September 19, 2009 6024 Silver Creek Valley Road San Jose, California 95138 Telephone: (408) 284-8200 FAX: (408) 284-3572 Printed in U.S.A. 2009
QUICKSWITCH PRODUCTS 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 32-BIT HIGH BANDWIDTH BUS SWITCH IDTQS3XVH25 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or 5V
QUICKSWITCH PRODUCTS 2.5V / 3.3V 16-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 16-BIT HIGH BANDWIDTH BUS SWITCH IDTQS32XVH245 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or
ZSC31050 Application Note: 0-to-10V Analog Output. Contents. List of Figures. List of Tables. AN-981 Application Note
ZSC31050 Application Note: 0-to-10V Analog Output AN-981 Application Note Contents 1. Introduction...2 2. Application Configuration...4 2.1 Output Voltage Adjustment V OUT...5 2.2 Setup for the ZSC31050
ZMID5201 Manual for Calibration and Linearization Using the Analog Output. Contents. List of Figures. List of Tables
ZMID5201 Manual for Calibration and Linearization Using the Analog Output Contents 1. Introduction...2 2. Spa, Pos0, and Pos1 Registers...3 3. Nonlinearity Error Correction...3 4. Zero Point Offset and
D0 - D8 INPUT REGISTER. RAM ARRAY 64 x 9, 256 x 9, 512 x 9, 1,024 x 9, 2,048 x 9, 4,096 x 9, 8,192 x 9 OUTPUT REGISTER RESET LOGIC RCLK REN1
CMOS SyncFIFO 64 x 9, 256 x 9, 512 x 9, 1,24 x 9, 2,48 x 9, 4,96 x 9 and 8,192 x 9 LEAD FINISH (SnPb) ARE IN EOL PROCESS - LAST TIME BUY EXPIRES JUNE 15, 218 FEATURES: 64 x 9-bit organization (IDT72421)
NOTE: For the remainder of this paper, we will refer to the logical equivalent of this signal as EAPD(#).
APPLICATION NOTE External Amplifier Power Down Usages EAPD Application Note Definition: The term EAPD stands for External Amplifier Power Down. Logical Operation: Although named External Amplifier Power
QUICKSWITCH PRODUCTS 2.5V / 3.3V 24-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 24-BIT HIGH BANDWIDTH BUS SWITCH FEATURES: N channel FET switches with no parasitic diode to Vcc Isolation under power-off conditions No DC path to Vcc or 5V tolerant in
Z8 Encore! XP 4K Series with extended Peripherals
High-Performance 8-Bit Microcontrollers Z8 Encore! XP 4K Series with extended Peripherals PB013603-0604 PRELIMINARY Product Block Diagram 1 4KB Two 16-Bit Timers/PWM Watch-Dog Timer with RC Oscillator
QUICKSWITCH PRODUCTS 2.5V / 3.3V 8-BIT HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V -BIT HIGH BANDWIDTH BUS SWITCH IDTQS3VH244 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to VCC or GND
Tsi148/Universe II Differences Application Note. Formal Status September 29, 2014
Titl Tsi148/Universe II Differences Application Note September 29, 2014 Introduction This document outlines the differences between the Tsi148 and the Universe II (CA91C142D) VME bridge devices. It is
QUICKSWITCH PRODUCTS 2.5V / 3.3V 8:1 MUX / DEMUX HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH PRODUCTS 2.5V / 3.3V 8:1 MUX / DEMUX HIGH BANDWIDTH BUS SWITCH IDTQS3VH251 FEATURES: N channel FET switches with no parasitic diode to VCC Isolation under power-off conditions No DC path to
ZSC31xxx / ZSSC3xxx. SSC Communication Board. Datasheet. Brief Description. Features. Benefits
SSC Communication Board ZSC31xxx / ZSSC3xxx Datasheet Brief Description The SSC Modular Evaluation Kit provides hardware and software for a very simple and intuitive method of evaluating IDT s sensor signal
ZMOD4410 Evaluation Kit User Manual. Description. Features. ZMOD4410-EVK Contents. ZMOD4410 Evaluation Kit
Description The ZMOD4410 Evaluation Kit (EVK) is designed for evaluating IDT s ZMOD4410 Gas Sensor Module for TVOC. The total volatile organic compounds (TVOC) measurement is one of the indicators for
Width Expansion Of SyncFIFOs (Clocked FIFOS)
Width Epansion Of SyncFIFOs ( FIFOS) by Rob De Voto APPLICATION NOTE AN-83 INTRODUCTION The performance requirements of today s systems are continually reaching to new heights. In response to needs for
IDT74FST BIT 2:1 MUX/DEMUX SWITCH
16-BIT 2:1 MUX/DEMUX SWITCH IDT74FST163233 FEATURES: Bus switches provide zero delay paths Low switch on-resistance TTL-compatible input and output levels ESD > 200 per MIL-STD-883, Method 3015; > 20 using
srio Hot Swap Application Note - 552
srio Hot Swap Application Note - 552 Introduction The objective of this application note is to provide some hot swap solutions for IDT's Pre-Processing Switch (PPS) and Central Packet Switch (CPS) switch
MPC9817ENR2. Clock Generator for PowerQUICC and PowerPC Microprocessors and Microcontrollers DATA SHEET NRND
Clock Generator for PowerQUICC and PowerPC Microprocessors and Microcontrollers MPC9817 DATA SHEET NRND The MPC9817 is a PLL-based clock generator specifically designed for Freescale Semiconductor Microprocessor
BLOCK DIAGRAM PIN ASSIGNMENT ICS LOW SKEW, DUAL, 1-TO-5 DIFFERENTIAL- TO-LVDS FANOUT BUFFER PRELIMINARY ICS854210
LOW SKEW, DUAL, 1-TO-5 DIFFERENTIAL- TO-LVDS FANOUT BUFFER ICS854210 GENERAL DESCRIPTION The ICS854210 is a low skew, high performance ICS dual 1-to-5 Differential-to-LVDS Fanout Buffer HiPerClockS and
IDT71016S/NS. CMOS Static RAM 1 Meg (64K x 16-Bit)
CMOS Static RAM 1 Meg (4K x 1-Bit) IDT711S/NS Features 4K x 1 advanced high-speed CMOS Static RAM Equal access and cycle times Commercial and Industrial: //2 One Chip Select plus one Output Enable pin
ZSSC5101 Evaluation Kit Description
Important Notes Restrictions in Use IDT s ZSSC5101 SSC Evaluation Kit, consisting of the SSC Communication Board (SSC CB), the ZSSC5101 Adapter Board (SSC EB), the ZSSC5101 AMR Demo Board, and the calibration
SUB-SYSTEM BOARD 5562 Campbell (MAXREFDES4#): 16-Bit High-Accuracy 4-20mA Input Isolated Analog Front End (AFE)
Maxim > Design Support > Technical Documents > Sub-System Boards > APP 5562 Keywords: Campbell, MAXREFDES4, subsystem reference design, analog front end, AFE, industrial sensors, isolated power and data,
IDTVP386. General Description. Features. Block Diagram DATASHEET ADVANCE INFORMATION 8/28-BIT LVDS RECEIVER FOR VIDEO
DATASHEET ADVANCE INFORMATION IDTVP386 General Description The VP386 is an ideal LVDS receiver that converts 4-pair LVDS data streams into parallel 28 bits of CMOS/TTL data with bandwidth up to 2.8 Gbps
MODEL USB-DA12-8E Eight Channel Digital to Analog Converter USER MANUAL
10623 Roselle Street, San Diego, CA 92121 (858) 550-9559 FAX (858) 550-7322 contactus@accesio.com www.accesio.com MODEL USB-DA12-8E Eight Channel Digital to Analog Converter USER MANUAL FILE: MUSB-DA12-8E.B1h
FRONT-HAUL COMPRESSION FOR EMERGING C- RAN AND SMALL CELL NETWORKS
FRONT-HAUL COMPRESSION FOR EMERGING C- RAN AND SMALL CELL NETWORKS April 29, 2013 6024 Silver Creek Valley Road, San Jose, California 95138 Telephone: (408) 284-8200 Fax: (408) 284-3572 2013 OVERVIEW This
Performance Comparison of IDT Tsi384 TM and Pericom PI7C9X130
Performance Comparison of IDT Tsi384 TM and Pericom PI7C9X130 October 2, 2009 6024 Silver Creek Valley Road San Jose, California 95138 Telephone: (408) 284-8200 FAX: (408) 284-3572 Printed in U.S.A. 2009,
Z8 Encore! XP Family of Microcontrollers Development Kits
Z8 Encore! XP Family of Microcontrollers Development Kits Introduction This describes how to set up your Z8 Encore! XP Development Kit and start using it to build designs and applications. Kit Contents
FS1023 Datasheet. Liquid Flow Sensor Module. Description. Features. FS1023 Flow Sensor Module. Typical Applications
Liquid Flow Sensor Module FS1023 Datasheet Description The FS1023 MEMS Liquid Flow Sensor Module measures the flow rate using the thermo-transfer (calorimetric) principle. The FS1023 is designed to measure
HYDRA-X10. Power Application Controllers TM. PAC HYDRA-X User s Guide. Copyright 2014 Active-Semi, Inc.
HYDRA-X10 Power Application Controllers TM PAC5210 - HYDRA-X User s Guide www.active-semi.com Copyright 2014 Active-Semi, Inc. CONTENTS Contents...2 Overview...3 HYDRA-X10 Body Resources...5 Header Descriptions...5
LINECARD SOLUTIONS WITH THE IDT8216X1 AND IDT821054A. Microprocessor. MPI Interface. Level Metering. LH SLIC 3 # (IDT8216x1) DSP.
LINECARD SOLUTIONS WITH THE IDT8216X1 AND IDT824A Application Note IDT ADVANTAGE V (CODEC & SLIC) and Battery Power Supply DSP-Based: Single LineCard Design Meets Different Standards Worldwide Internal
Z8 Encore! Z8F642 MCU Evaluation Kit
Evaluation Kit Quick Start Guide Introduction This guide acquaints users with the Z8 Encore! Z8F642 MCU Evaluation Kit, and gives instructions on setting up and using the tools to start building designs
ZWIR4532 Evaluation Kit User Manual. Description. Features. Kit Contents
Description The ZWIR4532 Development Kit is a set of three circuit boards intended as an evaluation and application development platform for the ZWIR4532 6LoWPAN module. Each Development Board provides
DS3174DK DS3/E3 Single-Chip Transceiver Demo Kit
www.maxim-ic.com GENERAL DESCRIPTION The DS3174DK is an easy-to-use demo kit for the DS3174. A surface-mounted DS3174 and careful layout of the analog signal traces provide maximum signal integrity to
3.3V CMOS Static RAM for Automotive Applications 4 Meg (256K x 16-Bit)
.V CMOS Static RAM for Automotive Applicatio Meg (25K x -Bit) IDTVYS IDTVYL Features 25K x advanced high-speed CMOS Static RAM JEDEC Center Power / GND pinout for reduced noise. Equal access and cycle
Tsi108 TM /Tsi109 TM Device Differences
Tsi108 TM /Tsi109 TM Device Differences October 29, 2009 6024 Silver Creek Valley Road San Jose, California 95138 Telephone: (408) 284-8200 FAX: (408) 284-3572 Printed in U.S.A. 2009, Inc. Titlepage GENERAL
UG0850 User Guide PolarFire FPGA Video Solution
UG0850 User Guide PolarFire FPGA Video Solution Microsemi Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136
CMOS PARALLEL-TO-SERIAL FIFO 1,024 x 16
CMOS PARALLEL-TO-SERIAL FIFO IDT72125 FEATURES: 25ns parallel port access time, 35ns cycle time 50MHz serial shift frequency ide x16 organization offering easy expansion Low power consumption (50mA typical)
AVR Intermediate Development Board. Product Manual. Contents. 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help
AVR Intermediate Development Board Product Manual Contents 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help 1. Overview 2. Features The board is built on a high quality FR-4(1.6
srio SERIAL BUFFER FLOW-CONTROL DEVICE
SERIAL BUFFER FLOW-CONTROL DEVICE 80KSBR201 Device Overview The IDT80KSBR201 is a high speed Buffer (SerB) that can connect up to two high-speed RapidIO interfaces. This device is built to work with any
PAC5523EVK1. Power Application Controllers. PAC5523EVK1 User s Guide. Copyright 2017 Active-Semi, Inc.
PAC5523EVK1 Power Application Controllers PAC5523EVK1 User s Guide www.active-semi.com Copyright 2017 Active-Semi, Inc. CONTENTS Contents...2 Overview...3 PAC5523EVK1 Resources...5 Pinout and Signal Connectivity...5
TAN-067 Applications Note R 3 Technology for T/E Carrier Redundancy Applications Preliminary Rev. 1.00
APPLICATIONS NOTE R 3 TECHNOLOGY FOR T/E CARRIER REDUNDANCY APPLICATIONS 1 Contents I. Introduction II. Scope III. Redundancy Topologies: 1:1, 1+1, N:1, N+1 IV. What is R 3 Technology? V. Redundancy Design
Flammable Gas Smart Sensing Module
Flammable Gas Smart Sensing Module SMOD711 Datasheet Description IDT s SMOD711 is a complete smart sensing solution for flammable gases in atmospheres. The module, consisting of the SMOD smart sensing
FAST CMOS OCTAL BUFFER/LINE DRIVER
FAST CMOS OCTAL BUFFER/LINE DRIVER IDT74FCT240A/C FEATURES: IDT74FCT240A 25% faster than FAST IDT74FCT240C up to 55% faster than FAST 64mA IOL CMOS power levels (1mW typ. static) Meets or exceeds JEDEC
Performance Comparison of IDT Tsi381 and Pericom PI7C9X110
Performance Comparison of IDT Tsi381 and Pericom PI7C9X110 October 1, 2009 6024 Silver Creek Valley Road San Jose, California 95138 Telephone: (408) 284-8200 FAX: (408) 284-3572 Printed in U.S.A. 2009,
CDB5346. Evaluation Board for CS5346. Features. Description CS5346. Single-ended Analog Inputs. Single-ended Analog Outputs
Evaluation Board for CS5346 Features Description Single-ended Analog Inputs Single-ended Analog Outputs CS8406 S/PDIF Digital Audio Transmitter Header for Optional External Software Configuration of CS5346
ARC-48: 8-Channel CCD Video Processing Board
ARC-48: 8-Channel CCD Video Processing Board This manual describes the 8-channel CCD video processor board, model ARC-48 Rev. 1A. The board serves two functions - processing and digitizing the video outputs
Hydrogen Gas Smart Sensing Module. Features
Resistance (ohms) Sensor Resistance Ratio (R s /R 50 ) Hydrogen Gas Smart Sensing Module SMOD701 Datasheet Description IDT s SMOD701 is a complete smart sensing solution for measuring hydrogen (H 2 ) gas
KSZ8795CLXD-EVAL Board (KSZ8795CLX+KSZ9031RNX) Demo Evaluation Board User s Guide
KSZ8795CLXD-EVAL Board (KSZ8795CLX+KSZ9031RNX) Demo Evaluation Board User s Guide KSZ8795 Family Integrated 5-port Managed Switch with 4 10/100 Copper Ports and Port 5 GMII/RGMII/MII/RMII Up-link Interface
AC/DC Adapter. Figure 1. Hardware Setup
C8051F12X DEVELOPMENT KIT USER S GUIDE 1. Kit Contents The C8051F12x Development Kit contains the following items: C8051F120 Target Board Serial Adapter (RS232 to Target Board Debug Interface Protocol
HYDRA-X23/X23S. Power Application Controllers. PAC HYDRA-X User s Guide. Copyright 2014 Active-Semi, Inc.
HYDRA-X23/X23S Power Application Controllers PAC5223 - HYDRA-X User s Guide www.active-semi.com Copyright 2014 Active-Semi, Inc. CONTENTS Contents...2 Overview...3 HYDRA-X23/X23S Body Resources...5 Header
Section 1 ATAVRAUTOEK1 Getting Started
Section 1 ATAVRAUTOEK1 Getting Started 1.1 Unpacking the system Kit contents: 1 ATAVRAUTO100 V1.0 board 1 ATAVRAUTO102 V1.0 board 1 ATAVRAUTO200 V1.0 board 1 ATAVRAUTO300 V1.0 board 1 ATAVRAUTO900 V1.0
Base Timer Channel (BT) Features. General Description. When to Use a PDL_BT Component 1.0
1.0 Features Four operating modes 16-bit PWM Timer 16-bit PPG Timer 16/32-bit Reload Timer 16/32-bit PWC Timer Trigger generation for ADC conversion General The Peripheral Driver Library (PDL) Base Timer
PEB383 (QFP) Evaluation Board User Manual
PEB383 (QFP) Evaluation Board User Manual February 2010 6024 Silver Creek Valley Road, San Jose, California 95138 Telephone: (800) 345-7015 (408) 284-8200 FAX: (408) 284-2775 Printed in U.S.A. 2009, Inc.
8051 Intermidiate Development Board. Product Manual. Contents. 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help
8051 Intermidiate Development Board Product Manual Contents 1) Overview 2) Features 3) Using the board 4) Troubleshooting and getting help 1. Overview 2. Features The board is built on a high quality FR-4(1.6