Pre Training Information Guide
|
|
- Wilfred Parker
- 5 years ago
- Views:
Transcription
1 Pre Training Information Guide ENSURE YOUR SUCCESS WITH SOLIDWORKS
2
3 Welcome, Following your registration to one of our training programs, here is some info about the classes and the services available in the proximity of SolidXperts. We thank you for using SOLIDWORKS and for trusting SolidXperts for your learning of the software. Martin Monarque VP - Technical SolidXperts, inc. All Rights Reserved. rev Page 2
4 Table of contents Dates & Times of your Training... 4 Being well prepared for the class... 5 Assimilating the content of the SOLIDWORKS training... 7 Other available trainings at SolidXperts... 8 SolidXperts Office Locations... 9 SolidXperts, inc. All Rights Reserved. rev Page 3
5 Date & time of your training: The SOLIDWORKS essentials training is divided in four days and the other classes last from one to three days. The dates will be given to you by your account manager. Fill with your training dates: TRAINING DATES NOTE: Unless otherwise specified, classes start at 8:30 AM and finish at 4:30 PM. Doors open at 8:00 AM. SolidXperts, inc. All Rights Reserved. rev Page 4
6 Being well prepared for the class To ease the training process during the first day, we recommend you go through a couple of SOLIDWORKS tutorials to understand the basics of the software. To access SOLIDWORKS tutorials: 1) Open SOLIDWORKS 2) In the menu bar (File; Edit, etc.) Click on Help, then select SOLIDWORKS tutorials. A new window will appear on the right. 3) We recommend doing the Getting started category first : a. Lesson 1 - Parts b. Lesson 2 - Assemblies c. Lesson 3 - Drawings These three lessons will familiarize you with the basic workings of SOLIDWORKS. **Tutorials are also accessible from the task pane SolidXperts, inc. All Rights Reserved. rev Page 5
7 To access SOLIDWORKS Simulation tutorials: 1) Open SOLIDWORKS 2) Add the SOLIDWORKS Simulation add-in by clicking on the Tools menu and add-ins. 3) Open an existing file or create a new one. 4) In the menu bar (File; Edit, etc.), click on the help menu, then select Simulation, then Simulation online tutorial (see image below). 5) We recommend doing the first for tutorials of the «static» section. These four lessons will familiarize you with the basic workings of SOLIDWORKS Simulation. SolidXperts, inc. All Rights Reserved. rev Page 6
8 Assimilating the content of the SOLIDWORKS training After the training course it is recommended to do the other tutorials that could be useful to you: Multibody Parts Advanced Drawings Pattern Features Animation Assembly Mates PhotoWorks Revolves and Sweeps Blocks Sheet Metal 3D Sketching 3D Sketching with Planes Lofts Mold Design Molded Product Design - Advanced Advanced Design Smart Components Customizing SOLIDWORKS Surfaces Toolbox Weldments Assimilating the content of the SOLIDWORKS Simulation training After the training course it is recommended to do the other tutorials that could be useful to you: Shrink Fit Remote Loads Bearing Load Symmetry Restraints Adaptive Methods Advanced Design Scenarios Bolt Connectors Spot Weld Connectors Mixing Solids and Shells Truss Structure SolidXperts, inc. All Rights Reserved. rev Page 7
9 Other available trainings at SolidXperts: Here is a list of the other trainings available at our locations. Please note that it is possible to adapt or personalize a class to your needs or specialty. ADVANCED TRAINING SOLIDWORKS Drawings Advanced Part Modeling Advanced Assembly Modeling Advanced Surface Modeling Mold Design Using SOLIDWORKS Sheet Metal Weldments Routing (Piping & Tubing) SOLIDWORKS Composer API SOLIDWORKS Composer Introduction to Visual Basic.Net API SOLIDWORKS 1 day 3 days SOLIDWORKS PDM (Products Data Management Software) SOLIDWORKS PDM (for users) SOLIDWORKS PDM (for administrators) SOLIDWORKS Simulation SOLIDWORKS Simulation SOLIDWORKS Motion SOLIDWORKS Simulation Professional SOLIDWORKS Simulation Premium SOLIDWORKS Flow Simulation What s new training Each year, we give a class on the new features of the program. SOLIDWORKS What s NEW 1 day 3 days 1 day 1 day You can get the class plan by or via our website SolidXperts, inc. All Rights Reserved. rev Page 8
10 SolidXperts Office Location: SolidXperts (Nashua, NH) 98 Spit Brook Road, Suite # 102 Nashua, NH No. Name Location MAP IT 1. SolidXperts (Nashua Office) 98 Spit Brook Road, Suite # 102 Nashua, NH [ MAP ] 2. Pressed Cafe 108 Spit Brook Rd, Nashua, NH [ MAP ] 3. Longhorn Steak House 5 Harold Dr, Nashua, NH 03060, USA [ MAP ] 4. Lui Lui 259 Daniel Webster Hwy, Nashua, NH [ MAP ] 5. Panera Bread 8 Spit Brook Rd, Nashua, NH [ MAP ] 6. Homewood Suites by Hilton 15 Tara Boulevard, Nashua, NH [ MAP ] 7. Radisson Hotel Nashua 11 Tara Blvd, Nashua, NH [ MAP ] 8. Motel 6 Nashua South 77 Spit Brook Rd, Nashua, NH [ MAP ] 9. Shopping Center Near Daniel Webster Highway [ MAP ] SolidXperts, inc. All Rights Reserved. rev Page 9
11
12 The training offered by SolidXperts focuses on the skills and concepts essential to your success in 3D design. Being a SOLIDWORKS Authorized Training Center, SolidXperts offers basic and advanced training of the highest quality. Our trainers are certified by Dassault Systèmes SOLIDWORKS Corp. Each course includes a training book and takes place in a room where each student has access to a workstation. SolidXperts is also a training organization approved by the CPMT on behalf of the Minister of Employment and Social Solidarity. We can therefore issue certificates in accordance with the "Act to promote the development and recognition of skills of the workforce" (Law of 1%). SolidXperts (Nashua, NH) 98 Spit Brook Road, Suite #102 Nashua, NH Telephone: Fax: info@solidxperts.com Tech support: Support support@solidxperts.com SolidXperts (Montréal) 2650 Marie Curie av. Saint-Laurent, QC, H4S 2C3 Telephone: Fax: info@solidxperts.com Tech support: Support support@solidxperts.com SolidXperts (Québec) 1173 Charest O. blvd., Suite #350 Québec, QC, G1N 2C9 Telephone: Fax: info@solidxperts.com Tech support: Support support@solidxperts.com
EASTERN CANADA. NEW ENGLAND. QUEBEC
Discover the UtilsXperts Phone: 1 877.876.5439 Fax: 1 877.876.5431 l info@solidxperts.com l www.solidxperts.com Page 1 Discover the UtilsXperts A series of utilities developed by SolidXperts and free for
More informationAppendix C: STEM Course Outline
C Appendix C: STEM Course Outline Science, Technology, Engineering, and Mathematics (STEM) Course Outline 1 Lesson 1: Using the Interface Engineering: Knowledge of an engineering design industry software
More informationEngineering Analysis
Engineering Analysis with SOLIDWORKS Simulation 2018 Paul M. Kurowski SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationAbout the Author. Acknowledgements
About the Author Dr. Paul Kurowski obtained his M.Sc. and Ph.D. in Applied Mechanics from Warsaw Technical University. He completed postdoctoral work at Kyoto University. Dr. Kurowski is an Assistant Professor
More informationSOLIDWORKS Certification Exam Guide & Practice Test. CSWP: Certified SOLIDWORKS Professional
SOLIDWORKS Certification Exam Guide & Practice Test CSWP: Certified SOLIDWORKS Professional 1 Contents About This Guide... 3 The CSWP Certification... 4 CSWP Exam Details... 5 How to Prepare for the Exam...
More informationSolidWorks 2014 Part I - Basic Tools Epub Gratuit
SolidWorks 2014 Part I - Basic Tools Epub Gratuit SolidWorks 2014 Part I - Basic Tools introduces new users to the SolidWorks interface, SolidWorks tools and basic modeling techniques. It provides readers
More informationPASSPORT. Become a SolidWorks Expert CADTEK S TRAINING INCLUDED COURSES:
SolidWorks TRAINING CADTEK S TRAINING PASSPORT Become a SolidWorks Expert Our training passport is the perfect solution to achieving a high quality skillset and full competency in the SolidWorks software
More informationSOLIDWORKS: Lesson 1 - Basics and Modeling. Introduction to Robotics
SOLIDWORKS: Lesson 1 - Basics and Modeling Fundamentals Introduction to Robotics SolidWorks SolidWorks is a 3D solid modeling package which allows users to develop full solid models in a simulated environment
More informationReplacing parts in an assembly
Replacing parts in an assembly Publication Number spse01665 Replacing parts in an assembly Publication Number spse01665 Proprietary and restricted rights notice This software and related documentation
More informationSOLIDWORKS 3D CAD. Course Outline ENSURE YOUR SUCCESS IN 3D DESIGN WITH SOLIDWORKS
2018 SOLIDWORKS 3D CAD Course Outline ENSURE YOUR SUCCESS IN 3D DESIGN WITH SOLIDWORKS SOLIDWORKS 2018 PRODUCT TRAINING MAIN INDEX SOLIDWORKS TRAINING... 2 SOLIDWORKS SIMULATION TRAINING... 22 SOLIDWORKS
More informationDesign Validation Simulation (Basic) SIM-BSC 3 days Simulation Professional SIM-PRO 2 days 2
J- RM SOLIDWORKS 3D Modeling Upgrade S-UPG 1 18 15 13 17 14 19 16 21 Essentials S-ESS 4 days+2days 5 2-5 & 8 5-9 3-7 31-4 4-8 9-13 30,31-3 4-8 Essentials (Weekend) S-ESS(WE) 5 Advanced Part Modeling S-APM
More informationSOLIDWORKS 3D CAD. Course Outline ENSURE YOUR SUCCESS IN 3D DESIGN WITH SOLIDWORKS
SOLIDWORKS 3D CAD Course Outline ENSURE YOUR SUCCESS IN 3D DESIGN WITH SOLIDWORKS SOLIDWORKS PRODUCT TRAINING MAIN INDEX SOLIDWORKS TRAINING... 2 SOLIDWORKS SIMULATION TRAINING... 22 SOLIDWORKS PDM TRAINING...
More informationSolidWorks 2015 User Interface
SolidWorks 2015 User Interface SolidWorks a Dassault Systèmes Product Starting SolidWorks 1) On the desktop, double-click or from the start menu select: All Programs SOLIDWORKS 2015 SOLIDWORKS 2015. 2)
More informationIME CADCAM TRAINING COURSE 2017 SCHEDULE Petaling Jaya (Date change without prior notice)
SOLIDWORKS 3D Modeling Upgrade S-UPG 1 5 17 16 20 18 15 Essentials S-ESS 5 9-13 6-8,10 & 13 6-10 3-7 2-5 & 8 5-9 Essentials (Weekend) S-ESS(WE) 5 Advanced Part Modeling S-APM 3 16-18 14-16 13-15 10-12
More informationTime and Location: T 6:30 PM to 9:20 PM SAL 127 (Section 1, 28758) Th 6:30 PM to 9:20 PM SAL 127 (Section 2, 28759)
UNIVERSITY OF SOUTHERN CALIFORNIA AME 408, Computer-Aided Design of Mechanical Systems Fall 2017 Time and Location: T 6:30 PM to 9:20 PM SAL 127 (Section 1, 28758) Th 6:30 PM to 9:20 PM SAL 127 (Section
More informationSOLIDWORKS: Lesson 1 - Basics and Modeling. UCF Engineering
SOLIDWORKS: Lesson 1 - Basics and Modeling Fundamentals UCF Engineering SolidWorks SolidWorks is a 3D solid modeling package which allows users to develop full solid models in a simulated environment for
More informationSOLIDWORKS. SOLIDWORKS Routing: Piping and Tubing. Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A.
SOLIDWORKS SOLIDWORKS Routing: Piping and Tubing Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA 02451 U.S.A. 1995-2017, Dassault Systemes SolidWorks Corporation, a Dassault Systèmes
More informationIME CADCAM TRAINING COURSE 2018 SCHEDULE Petaling Jaya (Date change without prior notice) Update as at
(Date change without prior notice) Update as at 09-01-2018 PROGRAMME TITLE CODE J-Duration Jun Jul Aug Sept Oct Nov Dec SOLIDWORKS 3D Modeling Upgrade S-UPG 28 19 16 27 18 22 20 Essentials S-ESS 4 days+2days
More informationSOLIDWORKS - SYLLABUS
SOLIDWORKS - SYLLABUS SolidWorks Syllabus 1 Introduction to CAD, CAE, PDM Features of SolidWorks, Total Duration : 90 Hour Various products available in SolidWorks for Product Design, Simulation, Communication
More informationEASTERN CANADA - NEW ENGLAND - QUEBEC
Syllabuses of Solidxperts s training sessions Page 1 Index SolidWorks Essentials - Modeling...3 SolidWorks Drawings...5 SolidWorks Sheet Metal...6 SolidWorks Weldment...7 SolidWorks Advanced assembly modeling...8
More informationAdvanced SolidWorks course curriculum development 04/24/2017 Group: F
Advanced SolidWorks course curriculum development Group: F Naser Alhajri ( Client Contact ) Yousef Alhaddad (Project Manager ) Mohammad Alfadhli ( Secretary/ Document manger ) Muhammad Alhajri ( Web Designer)
More informationPreparing for the Solid Edge Professional Certification Exam
Preparing for the Solid Edge Professional Certification Exam Where is the exam? Solid Edge Home page http://www.plm.automation.siemens.com/en_us/products/solid-edge/index.shtml Where is the exam? About
More informationAutodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 2]
11/29/2006-5:00 pm - 6:30 pm Room:Marcello - 4404 (MSD Campus) Autodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 2] Daniel Banach - MasterGraphics MA25-3 See MA24-2: Autodesk
More informationSolidWorks 2013 Part II - Advanced Techniques
SolidWorks 2013 Part II - Advanced Techniques Parts, Surfaces, Sheet Metal, SimulationXpress, Top-Down Assemblies, Core and Cavity Molds Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff
More information2D CAD. Courseware Issued: DURATION: 64 hrs
2D CAD Introduction File management Orthographic drawings View management Display management Layer management Selection methods Parametric drawings Symbol creation using block BOM / Joinery details creation
More informationToll Free: 1(877) Website:
Management Certification for Manufacturing Professionals (Customized) Course No. 324 (DET Course ID: 1073267) This course consists of 4 courses which prepare students to have the knowledge and skills in
More informationSolidWorks Implementation Guides. User Interface
SolidWorks Implementation Guides User Interface Since most 2D CAD and SolidWorks are applications in the Microsoft Windows environment, tool buttons, toolbars, and the general appearance of the windows
More informationBridge Design Project with SolidWorks Software. Put Picture Here
Engineering Design and Technology Series Bridge Design Project with SolidWorks Software Put Picture Here Dassault Systèmes SolidWorks Corporation 300 Baker Avenue Concord, Massachusetts 01742 USA Phone:
More informationDOWNLOAD OR READ : SOLIDWORKS EXAMS PDF EBOOK EPUB MOBI
DOWNLOAD OR READ : SOLIDWORKS EXAMS PDF EBOOK EPUB MOBI Page 1 Page 2 solidworks exams solidworks exams pdf solidworks exams SOLIDWORKS Certification Exam Guide & Practice Test... alongside four of the
More informationxx SolidWorks for Designers
Introduction SolidWorks 2004 Welcome to the entire new world of Computer Aided Designing (CAD) with SolidWorks. If you are a new user of this software package, you are going to join hands with thousands
More informationSolidWorks 2014 for Designers & Engineers
SolidWorks 2014 for Designers & Engineers Introduction to SolidWorks 2014 Niranga Silva B.Sc. Eng. (Hons.), M.Eng. 1 Learning Objectives Understand how to start SolidWorks. Learn about the system requirements
More informationSOLIDWORKS 2019 Advanced Techniques
SOLIDWORKS 2019 Advanced Techniques Mastering Parts, Surfaces, Sheet Metal, SimulationXpress, Top Down Assemblies, Core & Cavity Molds Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informationSOLIDWORKS Costing is available in SOLIDWORKS Professional and SOLIDWORKS Premium.
The SOLIDWORKS Costing tool helps you calculate how much it costs to manufacture sheet metal, machined, and multibody parts, as well as plastic molded, cast, 3D printed parts, and multibody weldments by
More information10 REASONS WHY SOLIDWORKS PREMIUM IS THE BEST CHOICE FOR CONSUMER PRODUCT DESIGNERS
W H I T E P A P E R 10 REASONS WHY SOLIDWORKS PREMIUM IS THE BEST CHOICE FOR CONSUMER PRODUCT DESIGNERS Overview Dassault Systèmes SolidWorks Corp. continues to further its mission to unleash the power
More informationThe Fundamentals of SolidWorks Featuring the VEXplorer robot with over 40 integrated stand-alone tutorials
INSIDE: Tutorial Model Files On CD The Fundamentals of SolidWorks 2007 Featuring the VEXplorer robot with over 40 integrated stand-alone tutorials David C. Planchard & Marie P. Planchard, CSWP SDC PUBLICATIONS
More informationSOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users
SOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users The premium provider of learning products and solutions www.cadartifex.com Table of Contents Dedication... 3 Preface... 15 Part 1. Introducing
More informationModeling and Simulation for Aircraft Structural Repair Using Modern FEA Tools
Modeling and Simulation for Aircraft Structural Repair Using Modern FEA Tools December 19-22, 2011 and January 9-12, 2012 Kuang-Hua Chang, Ph.D. Williams Presidential Professor School of Aerospace and
More informationEngineering Design with SolidWorks 2015 and Video Instruction
Engineering Design with SolidWorks 2015 and Video Instruction A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling NEW Contains a new chapter on additive manufacturing David C. Planchard,
More informationAlternate assemblies
Alternate assemblies Publication Number spse01685 Alternate assemblies Publication Number spse01685 Proprietary and restricted rights notice This software and related documentation are proprietary to
More informationFeature-Based Modeling and Optional Advanced Modeling. ENGR 1182 SolidWorks 05
Feature-Based Modeling and Optional Advanced Modeling ENGR 1182 SolidWorks 05 Today s Objectives Feature-Based Modeling (comprised of 2 sections as shown below) 1. Breaking it down into features Creating
More informationSolidWorks 2014 Part II - Advanced Techniques
SolidWorks 2014 Part II - Advanced Techniques Parts, Surfaces, Sheet Metal, SimulationXpress, Top-Down Assemblies, Core and Cavity Molds Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informatione b f SOLIDWORKS ESSENTIALS 1) SOLIDWORKS USER INTERFACE SUBJECT: USER INTERFACE KEYWORDS: ESSENTIALS/ FUNDAMENTALS a) The Graphics Area
SUBJECT: USER INTERFACE KEYWORDS: ESSENTIALS/ FUNDAMENTALS SOLIDWORKS ESSENTIALS The aim of this document is to provide additional reference material to allow new users of SolidWorks to navigate through
More informationGroup 5 James Pacey, Ray Brown, Brent Sutherland
Group 5 James Pacey, Ray Brown, Brent Sutherland Definition: To model a constant velocity birfield axle joint and shaft, and perform a stress analysis on the birfield Objectives: Gain further CAD experience
More informationSOLIDWORKS 2015: A Power Guide for Beginner and Intermediate Users
SOLIDWORKS 2015: A Power Guide for Beginner and Intermediate Users The premium provider of learning products and solutions www.cadartifex.com SOLIDWORKS 2015: A Power Guide for Beginner and Intermediate
More informationDOWNLOAD OR READ : SOLIDWORKS 2018 PDF EBOOK EPUB MOBI
DOWNLOAD OR READ : SOLIDWORKS 2018 PDF EBOOK EPUB MOBI Page 1 Page 2 solidworks 2018 solidworks 2018 pdf solidworks 2018 DisplayingComponent-levelDimXpertAnnotationsinAssemblies...83 GeneralProfileTolerance...84
More informationEach trainee receives the official 260 page courseware as part of attending this course.
Level 1 NURBS modelling with Rhino Course Outline This course is for anyone new, or nearly new, to Rhino. Recognised as THE introductory course for Rhino, all trainees receive an Official Certificate on
More informationCOURSE SCHEDULE. 1 st April th June Supporting Your Development. Registered Office. Contact
COURSE SCHEDULE 1 st April 2017 30 th June 2017 Mechanical Engineering Electrical Engineering Fabrication & Welding First Aid Health and Safety Fork Lift Truck People Management and Professional Development
More informationCourse Title: Assembly Tips and Techniques in Autodesk Inventor
Las Vegas, Nevada, December 3 6, 2002 Speaker Name: Neil Munro Course Title: Assembly Tips and Techniques in Autodesk Inventor Course ID: MA41-2 Course Outline: Investigate bottom-up, top-down, and middle-out
More informationSpring Assembly. in the Begin Assembly Property. on the Standard toolbar and click Add-Ins.
Chapter 2 Spring Assembly A. Create New Assembly. Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click Cancel Manager. in the Begin Assembly Property B. Enable Toolbox Browser. Step 1. If
More informationSOLIDWORKS Parametric Modeling with SDC. Covers material found on the CSWA exam. Randy H. Shih Paul J. Schilling
Parametric Modeling with SOLIDWORKS 2015 Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF
More informationAbout the Author. Acknowledgements
About the Author Dr. Paul Kurowski obtained his MSc and PhD in Applied Mechanics from Warsaw Technical University. He completed postdoctoral work at Kyoto University. Dr. Kurowski is an Assistant Professor
More informationParkway Metal Products, Inc. ParkwayMetal.com
Parkway Metal Products, Inc. ParkwayMetal.com 847-789-4000 info@parkwaymetal.com Parkway Metal Products, Inc. Superior Metal Work Parkway Metal Products, Inc. specializes in precision sheet metal fabricating
More informationCHAPTER 1: SOLIDWORKS 2008 USER INTERFACE
CHAPTER 1: SOLIDWORKS 2008 USER INTERFACE Chapter Objective SolidWorks is a design software application used to model and create 2D and 3D sketches, 3D parts and assemblies, and 2D drawings. Chapter 1
More informationAn Overview of Pro/ENGINEER
An Overview of Pro/ENGINEER The Foundation of Pro/ENGINEER What is Pro/ENGINEER? Pro/ENGINEER is a computer graphics system for modeling various mechanical designs and for performing related design and
More informationSolidWorks 2013 and Engineering Graphics
SolidWorks 2013 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following
More informationAttach to this tutorial, there are some drawings to create the CAD models with Solid Works.
Modeling and Simulation Tutorial 1. (Slider Mechanism) Objective: To Create Slider Mechanism Elements to Use: SolidWorks Cosmos Motion Dynamics Books Description: This tutorial explains how to set up different
More informationParametric Modeling with SolidWorks
Parametric Modeling with SolidWorks 2012 LEGO MINDSTORMS NXT Assembly Project Included Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationParametric Modeling with SOLIDWORKS 2017
Parametric Modeling with SOLIDWORKS 2017 NEW Contains a new chapter on 3D printing Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informationCOURSE SCHEDULE. 1 st October st December Registered Office. Contact. Web:
COURSE SCHEDULE 1 st October 2018 31 st December 2018 Mechanical Engineering Electrical Engineering Fabrication & Welding First Aid Health and Safety Fork Lift Truck People Management and Professional
More informationAppendix B: Certified SolidWorks Associate Sample Exam
B Certified SolidWorks Associate (CSWA) The Certified SolidWorks Associate (CSWA) Certification Program provides the skills students need to work in the design and engineering fields. Successfully passing
More informationTRIBAL WATER AND WASTEWATER OPERATOR CERTIFICATION PROGRAM TRAINING ANNOUNCEMENT WATER DISTRIBUTION LEVEL 2 TRAINING AND CERTIFICATION EXAM FOR WATER
TRIBAL WATER AND WASTEWATER OPERATOR CERTIFICATION PROGRAM TRAINING ANNOUNCEMENT WATER DISTRIBUTION LEVEL 2 TRAINING AND CERTIFICATION EXAM FOR WATER OPERATORS Hosted by the Salt River Pima-Maricopa Indian
More informationCast Corn Sheller. Sand Blaster. File Ruler Calipers
BUILD IT BUILD-IT Cast Corn Sheller This project is a low-cost device for removing corn kernels from the cob. It is cast in aluminum using a casting pattern made on the 3-D printer. This project is inspired
More informationSolidWorks 2001 Getting Started
SolidWorks 2001 Getting Started 1995-2001, SolidWorks Corporation 300 Baker Avenue Concord, Massachusetts 01742 USA All Rights Reserved. U.S. Patent 5,815,154 SolidWorks Corporation is a Dassault Systemes
More informationThe following learning resources are pre-requisites to help prepare you in supporting your students through this course.
Introduction to CAD: From 2D to 3D Modeling Instructor Guide This instructor guide is a comprehensive tool for facilitating this course in the classroom. Prepare to teach this course by thoroughly reviewing
More informationSolidworks 2015 Part I Basic Tools By Paul Tran
Solidworks 2015 Part I Basic Tools By Paul Tran SolidWorks 2015 Part I - Basic Tools th edition - COUPON: Rent SolidWorks 2015 Part I - Basic Tools th edition (9781585039432) and save up to 80% on textbook
More informationLesson 10: Loft Features
10 Lesson 10: Loft Features Goals of This Lesson Your students will be able to create the following part: profiles chisel Resources for This Lesson This lesson plan corresponds to the Lofts module in the
More informationSOLIDWORKS 2016 and Engineering Graphics
SOLIDWORKS 2016 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationCast Corn Sheller BUILD-IT
BUILD-IT Cast Corn Sheller This project is a low-cost device for removing corn kernels from the cob. It is cast in aluminum using a casting pattern made on the 3-D printer. This project is inspired by
More informationto Market Faster Bringing Innovative Medical Products inspiration
white paper Bringing Innovative Medical Products to Market Faster inspiration SUMMARY To succeed in today s medical device manufacturing industry, product designers must not only create innovative medical
More information3. Preprocessing of ABAQUS/CAE
3.1 Create new model database 3. Preprocessing of ABAQUS/CAE A finite element analysis in ABAQUS/CAE starts from create new model database in the toolbar. Then save it with a name user defined. To build
More informationWhat I ve Missed SolidWorks Tools that MOST USERS FORGOT!
What I ve Missed 101+ SolidWorks Tools that MOST USERS FORGOT! Speaker Introduction Brandon Roby President, Whole Hog Technologies, Inc. NMSUG President CSWP Former VAR AE & Engineering Services Mgr Whole
More informationIntroduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
More informationSolidworks Student Edition File Type
SOLIDWORKS STUDENT EDITION FILE TYPE PDF - Are you looking for solidworks student edition file type Books? Now, you will be happy that at this time solidworks student edition file type PDF is available
More informationEngineering Design with SOLIDWORKS 2018
Engineering Design with SOLIDWORKS 2018 and Video Instruction A Step-by-Step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard, CSWP, SOLIDWORKS Accredited Educator SDC PUBLICATIONS
More informationAn Introduction to Motion Analysis Applications with SolidWorks Motion, Instructor Guide
Engineering Design and Technology Series An Introduction to Motion Analysis Applications with SolidWorks Motion, Instructor Guide Dassault Systèmes SolidWorks Corporation 300 Baker Avenue Concord, Massachusetts
More informationDevelopment of Solid Models and Multimedia Presentations of Kinematic Pairs
Session 2793 Development of Solid Models and Multimedia Presentations of Kinematic Pairs Scott Michael Wharton, Dr. Yesh P. Singh The University of Texas at San Antonio, San Antonio, Texas Abstract Understanding
More informationSOLIDWORKS. Assembly Modeling. Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A.
Assembly Modeling Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA 02451 U.S.A. 1995-2018, Dassault Systemes SolidWorks Corporation, a Dassault Systèmes SE company, 175 Wyman Street,
More informationCSA STANDARDS W47.1, W47.2 & W186 CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO. Congratulations and Welcome to the Certification Application Process
CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO CSA STANDARDS W47.1, W47.2 & W186 Congratulations and Welcome to the Certification Application Process This guide will help you as an applicant company meet
More informationFlow Sim. Chapter 16. Airplane. A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file.
Chapter 16 Airplane Flow Sim A. Enable Flow Simulation. Step 1. If necessary, open your ASSEMBLY file. Step 2. If necessary, turn on Flow Simulation, click the flyout of Options on the Standard toolbar
More informationWorking with Neutral Format Surface and Solid Models in Autodesk Inventor
Working with Neutral Format Surface and Solid Models in Autodesk Inventor JD Mather Pennsylvania College of Technology Session ID ML205-1P In this class we will learn how to utilize neutral format data
More informationComputer-Aided Design / Computer-Aided Manufacturing MEE430,KIM,ME,NIU
Computer-Aided Design / Computer-Aided Manufacturing Computer-Aided Design and Computer-Aided Manufacturing and Applications with Pro/E, 4 th Edition, Meung J. Kim., 2013, LuLu Publishing Co. Reference
More informationSOLIDWORKS. Assembly Modeling. Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A.
SOLIDWORKS Assembly Modeling Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA 02451 U.S.A. 1995-2016, Dassault Systemes SolidWorks Corporation, a Dassault Systèmes SE company, 175
More informationCreo for Analyst. Overview
Creo for Analyst Overview In this course, you will learn how to utilize the core functionality enhancements in Creo Parametric 2.0. First, you will become familiar with using and customizing the new ribbon
More informationCENTURION SYSTEMS (PTY.) LTD.
CENTURION SYSTEMS (PTY.) LTD. GROWING AN ACCESS AUTOMATION/CONTROL PRODUCTS MANUFACTURING COMPANY WITH SOLIDWORKS SOLUTIONS Centurion Systems relies on SOLIDWORKS design, analysis, mold-filling simulation,
More informationWater Distribution Level 1 January 8 12, 2018
Water Distribution Level 1 Operator Training and Certi ication Exam January 8 12, 2018 Hosted by: Lac Courte Oreilles Public Works Lac Courte Oreilles Ojibwa Community College Hayward, Wisconsin Includes:
More informationProprietary and restricted rights notice
Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle Management Software Inc. 2012 Siemens Product Lifecycle Management Software
More informationSolidworks 2006 Surface-modeling
Solidworks 2006 Surface-modeling (Tutorial 2-Mouse) Surface-modeling Solid-modeling A- 1 Assembly Design Design with a Master Model Surface-modeling Tutorial 2A Import 2D outline drawing into Solidworks2006
More informationSolidWorks Tutorial 3
SolidWorks Tutorial Magnetic Block Preparatory Vocational Training and Advanced Vocational Training Dassault Systèmes SolidWorks Corporation, 75 Wyman Street Waltham, Massachusetts 045 USA Phone: +-800-69-9000
More informationVirtual Training for the Flexographic Professional
Virtual Training for the Flexographic Professional FPPA 14th Annual Convention February 20-22, 2011 Joe Tuccitto FTA Director of Education What is TEST TEST & FIRST Topics Virtual Training Vs. Classroom
More informationComparing the Capabilities of Autodesk Inventor Professional 2011 and SolidWorks Premium 2010 Using TechniCom s Delphi Expert Technique
Comparing the Capabilities of Autodesk Inventor Professional 2011 and SolidWorks Premium 2010 Using TechniCom s Delphi Expert Technique A whitepaper by Raymond Kurland of TechniCom Group June 2010 TechniCom
More informationWastewater Treatment Level 1 Operator Training and Certification Exam
Wastewater Treatment Level 1 Operator Training and Certification Exam July 10 14, 2017 Hosted by: Shakopee Mdewakanton Sioux Community Mystic Lake Casino Hotel Includes: FREE Training for Tribal Wastewater
More informationVibration Analysis with SOLIDWORKS Simulation and SOLIDWORKS. Before you start 7
i Table of contents Before you start 7 Notes on hands-on exercises and functionality of Simulation Prerequisites Selected terminology 1: Introduction to vibration analysis 10 Differences between a mechanism
More informationChapter 1. SolidWorks Overview
Chapter 1 SolidWorks Overview Objectives: When you complete this chapter you will: Have a good background knowledge of SolidWorks Have learnt how to start a SolidWorks session Understand the SolidWorks
More informationAWS Presentation to ASME Section IX, SG Qualification Houston January 26, 2015 by John Gayler Senior Associate Executive Director
AWS Presentation to ASME Section IX, SG Qualification Houston January 26, 2015 by John Gayler Senior Associate Executive Director American Welding Society 1919 1971 New York City, NY 1971 Present Miami,
More informationSOLIDWORKS. SOLIDWORKS Essentials. Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A.
SOLIDWORKS SOLIDWORKS Essentials Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA 02451 U.S.A. 1995-2017, Dassault Systemes SolidWorks Corporation, a Dassault Systèmes SE company,
More informationTHE SENSE PROGRAM SCHOOLS EXCELLING THROUGH NATIONAL SKILL STANDARDS EDUCATION
THE SENSE PROGRAM SCHOOLS EXCELLING THROUGH NATIONAL SKILL STANDARDS EDUCATION Welding Industry Careers Welder Materials Engineer Welding Engineer Robotics Technician Welding Technician Business Owner
More informationSOLIDWORKS. SOLIDWORKS Plastics. Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A.
SOLIDWORKS SOLIDWORKS Plastics Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA 02451 U.S.A. 1995-2017, Dassault Systemes SolidWorks Corporation, a Dassault Systèmes SE company, 175
More informationIncludes: FREE Training for Tribal Personnel Opportunity for FREE Professional Certification FREE Wastewater Collection Level 1 Certification Exams
Wastewater Collection - Level 1 Tribal Operator Training and Certification Exam April 3-5, 2018 Hosted by: Quechan Indian Tribe, Publics Works Department Includes: FREE Training for Tribal Personnel Opportunity
More informationSOLIDWORKS. Mold Design Using SOLIDWORKS. Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A.
SOLIDWORKS Mold Design Using SOLIDWORKS Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA 02451 U.S.A. 1995-2017, Dassault Systemes SolidWorks Corporation, a Dassault Systèmes SE company,
More informationCreo 2.0. Curriculum Guide
Creo 2.0 Curriculum Guide Live Classroom Curriculum Guide Update to Creo Parametric 2.0 from Creo Elements/Pro 5.0 Update to Creo Parametric 2.0 from Pro/ENGINEER Wildfire 4.0 Introduction to Creo Parametric
More information