ME Week 4 Project 3 Designing in Context
|
|
|
- Stuart Foster
- 6 years ago
- Views:
Transcription
1 1 Designing in the Assembly Context (Top Down) The following section will give an overview of interacting with an assembly model with in context designing. In context part creation and assembly component referencing will be used. Additional 3D constraints with complete this in process design. 1.1 Project 3 The upper press clamp assembly has been setup to its start postion as well as the handel detail. Using these postions a detail will need to be designed to mount a cam follower. 1. Open an existing assembly file. On the Quick Access toolbar, click Open. In the Open dialog box, select the file Mating Press View.iam Click Open. ME Introduction to CAD/CAE Tools Page 1 of 16
2 2. So that the start positions do not move while design, Shift-Select both Press Clamp Assembly 2 and Press Cam in the graphics window or browser. Right-click, and select Grounded 3. Create In-Place Component Start the Create In-Place Component tool Assemble tab Component panel Create On the Create In-Place Component dialog box enter CamFollower-Mount for the New Component Name ME Introduction to CAD/CAE Tools Page 2 of 16
3 Click the Browse Templates to change the Template to Metric\Standard (mm).iam Click OK 4. Sketch the following profile: 5. Start the Extrude tool ME Introduction to CAD/CAE Tools Page 3 of 16
4 Extrude using the symmetric option,.75 in Click Return on the ribbon to return to the assembly. 6. Start the Constrain tool On the Place Constraint dialog box set the following options Type: Mate Solution: Mate Pick the top face shown of the weldment rib for Selection 1 Pick the underside face shown of component CamFollwer-Mount for Selection 2 Enter 0 into the Offset field. ME Introduction to CAD/CAE Tools Page 4 of 16
5 Click Apply 7. Continue the Constrain tool On the Place Constraint dialog box set the following options Type: Mate Solution: Mate Pick the face shown of component CamFollower-Mount for Selection 1 Pick the face shown of the weldment rib for Selection 2 Enter 0 into the Offset field. Click Apply 8. Continue the Constrain tool On the Place Constraint dialog box set the following options Type: Mate Solution: Mate Pick the Origin XY Plane of component CamFollower-Mount for Selection 1 Pick the hole centerpoint shown of the weldment rib for Selection 2 ME Introduction to CAD/CAE Tools Page 5 of 16
6 Enter 0 into the Offset field. Click OK 9. Double click CamFollower-Mount to edit the part ME Introduction to CAD/CAE Tools Page 6 of 16
7 10. Sketch the following profile ME Introduction to CAD/CAE Tools Page 7 of 16
8 11. Extrude the Cut profile Through All 12. Create 5 mm Chamfers on the top edges 13. Position through hole for Cam Follower Create sketch on side face of CamFollower-Mount ME Introduction to CAD/CAE Tools Page 8 of 16
9 Start Project Geometry Tool, project edge of component Press_Cam Create.75 in construction circle to represent the Cam Follower ME Introduction to CAD/CAE Tools Page 9 of 16
10 Position the construction circle as shown with the tangent constraint Exit the sketch Start the Hole tool Place a From Sketch Hole picking the circle center point in the sketch with following options: Type: Drilled Diameter:.375 in Termination: Through All Click OK 14. Add mounting holes ME Introduction to CAD/CAE Tools Page 10 of 16
11 Create sketch on front face of CamFollower-Mount Start Project Geometry tool Project tapped holes as shown Start Hole Tool Place a From Sketch Hole picking the circle center point in the sketch with following options: Type: Counterbore Standard: ANSI Metric M Profile Fastener Type: Socket Head Cap Screw Size: M5 Fit: Normal Termination: Through All ME Introduction to CAD/CAE Tools Page 11 of 16
12 Click OK 15. Place Components Place the following components into the Mating Press View CCF-360.ipt.375-LockWasher.ipt HexNut.ipt 16. Start the Constrain tool. On the Place Constraint dialog box set the following options Type: Insert Solution: Opposed Pick the circular edge shown of component CCF-360 for Selection 1 ME Introduction to CAD/CAE Tools Page 12 of 16
13 Pick the circular edge shown of component CamFollower-Mount for Selection 2 Enter 0 into the Offset field. Click Apply 17. Continue the Constrain tool. On the Place Constraint dialog box set the following options Type: Insert Solution: Opposed Pick the circular edge shown of component.375-lockwasher for Selection 1 ME Introduction to CAD/CAE Tools Page 13 of 16
14 Pick the circular edge shown of component CamFollower-Mount for Selection 2 Enter 0 into the Offset field. Click Apply 18. Continue the Constrain tool. On the Place Constraint dialog box set the following options Type: Insert Solution: Opposed Pick the circular edge shown of component hexnut for Selection 1 ME Introduction to CAD/CAE Tools Page 14 of 16
15 Pick the circular edge shown of component.375-lockwasher for Selection 2 Enter 0 into the Offset field. Click Apply 19. Start the Constrain tool. On the Place Constraint dialog box set the following options Type: Tangent Solution: Outside Pick the face shown of component Press_Cam for Selection 1 Pick the cylindrical face shown of component CCF-360 for Selection 2 Enter 0 into the Offset field. ME Introduction to CAD/CAE Tools Page 15 of 16
16 Click OK 20. Right-click CamFollower-Mount in the browser, select Adaptive to clear Adaptivity 21. Shift-select Press Clamp Assembly 2 and Press_Cam. Right-click, select Ground to Unground both components 22. Drag the Press_Cam handel. Notice how the Press Clamp Assembly 2 assembly moves. 23. Click Save on the Quick Access Toolbar 24. Close all files ME Introduction to CAD/CAE Tools Page 16 of 16
Tips & Techniques in Autodesk Inventor 2013/2014 PLTW - Wisconsin Dec. 10, 2013
Tips & Techniques in Autodesk Inventor 2013/2014 PLTW - Wisconsin Dec. 10, 2013 Dan Banach Autodesk Inc. Dataset https://www.dropbox.com/sh/scpc4lkk94lmq8n/ydbxbxemet Instructors & students register for
Inventor 201. Work Planes, Features & Constraints: Advanced part features and constraints
Work Planes, Features & Constraints: 1. Select the Work Plane feature tool, move the cursor to the rim of the base so that inside and outside edges are highlighted and click once on the bottom rim of the
ME Week 3 Project 3 - Plastic Part Thicken Method
Plastic Part Commands The following section will give a further overview of the Autodesk Inventor plastic part commands. 1. Project 3 This project will further introduce you to the Autodesk Inventor 2012
Autodesk Inventor 6 Essentials Instructor Guide Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the follow
Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the following topics and provides exercises for students to practice their skills. Day Two Topic: How to create
Skateboard. Hanger. in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. Fig. 2
Chapter 3 Skateboard Hanger A. Sketch1 Lines. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Right Plane in the Feature Manager and click Sketch on the Context toolbar, Fig. 1.
Project 3. Top Down Design In Context. Below are the desired outcomes and usage competencies based upon the completion of this Project.
Assembly Modeling with SolidWorks Project 3 Below are the desired outcomes and usage competencies based upon the completion of this Project. Project Desired Outcomes: 2AXIS-TRANSFER Assembly. PLATE-B Part.
Autodesk Inventor - Basics Tutorial Exercise 1
Autodesk Inventor - Basics Tutorial Exercise 1 Launch Inventor Professional 2015 1. Start a New part. Depending on how Inventor was installed, using this icon may get you an Inch or Metric file. To be
Skateboard. Hanger. in the Feature Manager and click Sketch. (S) on the Sketch. Line
Chapter 3 Skateboard Hanger A. Sketch 1. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Right Plane from the Content toolbar, Fig. 1. in the Feature Manager and click Sketch Step
Wheel GT-F. Chapter 5. CO2 Shell Car. A. Sketch. Step 1. Click File Menu > New, click Part Metric and OK.
Chapter 5 CO2 Shell Car Wheel GT-F A. Sketch. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the context toolbar, Fig. 1.
ME Week 4 Project 2 Assembly Interaction
1 Interacting with an Assembly Introduction The following section will give an overview of interacting with an assembly model and using various tools to locate parts, visualize specific area of the assembly,
Propeller. Chapter 13. Airplane. A. Base for Blade. Step 1. Click File Menu > New, click Part and OK.
Chapter 13 Airplane Propeller A. Base for Blade. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Top Plane in the Feature Manager and click Sketch toolbar, Fig. 1. from the Content Step
Chair. Top Rail. on the Standard Views toolbar. (Ctrl-7) on the Weldments toolbar. at bottom left corner of display to deter- mine sketch plane.
Chapter 7 A. 3D Sketch. Step 1. If necessary, open your CHAIR file. Chair Top Rail Step 2. Click Isometric on the Standard Views toolbar. (Ctrl-7) Step 3. Zoom in around top of back leg, Fig. 1. To zoom,
F-1 Car. Blank. in the Feature Manager and click Sketch from the Content toolbar, Fig. 3. Origin. on the Features toolbar.
Chapter 1 A. New Metric Part. Step 1. Click File Menu > New. F-1 Car Blank Step 2. Click Part Metric from the list of templates and click OK, Fig. 1. If you are not using SOLIDWORKS templates (you should
Solar Car. Chassis. in the Feature Manager and click Sketch from the Content toolbar, Fig. 2. Origin. on the Command Manager toolbar. Fig.
Chapter 1 A. New Part. Step 1. Click File Menu > New. Solar Car Chassis Step 2. Click Part from the list and click OK, Fig. 1. B. Sketch Chassis. Step 1. Click Right Plane in the Feature Manager and click
Blank. Chapter 1. CO2 Rail Car. A. New Metric Part. Step 1. Click File Menu > New. B. Body. Step 1. Click Right Plane
Chapter 1 A. New Metric Part. Step 1. Click File Menu > New. CO2 Rail Car Blank Step 2. Click Part Metric from the list and click OK, Fig. 1. If you are not using SolidWorks templates (you should be),
3 AXIS STANDARD CAD. BobCAD-CAM Version 28 Training Workbook 3 Axis Standard CAD
3 AXIS STANDARD CAD This tutorial explains how to create the CAD model for the Mill 3 Axis Standard demonstration file. The design process includes using the Shape Library and other wireframe functions
Autodesk Inventor 2016 Learn by doing. Tutorial Books
Autodesk Inventor 2016 Learn by doing Tutorial Books Copyright 2015 Kishore This book may not be duplicated in any way without the express written consent of the publisher, except in the form of brief
Lesson 13 Patterns and Weldments
Lesson 13 Patterns and Weldments Figure 13.1 Mounting System Weldment OBJECTIVES Create directional patterns Create dimensional patterns Pattern components on an assembly Insert multiple standard parts
Visit the following websites to learn more about this book:
Assembly Modeling Model Files Initial and Final Solutions! with SolidWorks 2012 For the SolidWorks user who needs to understand Assembly modeling By Planchard & Planchard CSWP SDC SSoolliiddW Woorrkkss
SOLIDWORKS 2018 Reference Guide
SOLIDWORKS 2018 Reference Guide A comprehensive reference guide with over 250 standalone tutorials David C. Planchard, CSWP, SOLIDWORKS Accredited Educator SDC PUBLICATIONS Better Textbooks. Lower Prices.
Assembly Modeling with SolidWorks For the Intermediate SolidWorks User. David C. Planchard & Marie P. Planchard SDC PUBLICATIONS
Supplemental Files on CD Assembly Modeling with SolidWorks 2006 For the Intermediate SolidWorks User David C. Planchard & Marie P. Planchard SDC PUBLICATIONS Schroff Development Corporation www.schroff.com
ME Week 11 Create Joints Project
One of the most important elements of dynamic simulation is setting up and verifying that proper joints are created. Joints are links between two rigid components that applies force from the first component
Introduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
Week 2 Lecture 3D Part Design. ME Introduction to CAD/CAE Tools
Week 2 Lecture 3D Part Design Lecture Topics Product Lifecycle Process Review Detailed Product Engineering Challenges and Purpose Evolution of CAD General 3D Design Concepts Case Study Examples Product
Speedway. Body. (S) on the Sketch toolbar. Fig. 1
Chapter 1 A. New Part. Step 1. Click File Menu > New. Speedway Body Step 2. Click Part from the list and click OK, Fig. 1. B. Sketch Construction Rectangle. Step 1. Click Right Plane in the Feature Manager
Lesson 13 Patterns and Weldments
Lesson 13 Patterns and Weldments Figure 13.1 Mounting System Weldment OBJECTIVES Create directional patterns and dimensional patterns Pattern components on an assembly Insert multiple standard parts using
MEM30004A. AutoCAD Inventor Advanced Use CAD to create and display 3D models. MEM30004A Autodesk Inventor (Advanced)
MEM30004A AutoCAD Inventor Advanced Use CAD to create and display 3D models. BlackLine Design Page 1 of 26 Table of Contents Conditions of Use:... 2 Unit Resource Manual... 2 Manufacturing Skills Australia
Module 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
SOLIDWORKS 2019 Advanced Techniques
SOLIDWORKS 2019 Advanced Techniques Mastering Parts, Surfaces, Sheet Metal, SimulationXpress, Top Down Assemblies, Core & Cavity Molds Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.
F1 Car. Wheel. in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. (S) on the
Chapter 3 F1 Car Wheel A. Sketch Lines. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. Step 3.
Feature-Based Modeling and Optional Advanced Modeling. ENGR 1182 SolidWorks 05
Feature-Based Modeling and Optional Advanced Modeling ENGR 1182 SolidWorks 05 Today s Objectives Feature-Based Modeling (comprised of 2 sections as shown below) 1. Breaking it down into features Creating
Delta Dart. Socket. (L) on the Sketch toolbar. Fig. 1. (S) on the Sketch toolbar. on the Sketch toolbar. on the Standard Views toolbar.
Chapter 6 Delta Dart Socket A. Sketch. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. Step
Introduction to SolidWorks for Technology. No1: Childs Toy
Introduction to SolidWorks for Technology No1: Childs Toy Table of Contents Table of Contents... 1 Introduction... 2 Part Modelling: Cab... 3 Part Modelling: Base... 6 Part Modelling: Wheel... 12 Assembly:
Parametric Modeling Design and Modeling 2011 Project Lead The Way, Inc.
Parametric Modeling Design and Modeling 2011 Project Lead The Way, Inc. 3D Modeling Steps - Sketch Step 1 Sketch Geometry Sketch Geometry Line Sketch Tool 3D Modeling Steps - Constrain Step 1 Sketch Geometry
Boat. Battery Holder AA
Chapter 9 Boat Battery Holder AA A. Front Extrude. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch context toolbar, Fig. 1. Step 3. Click
Exercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
Simple Machines. Body. Step 4. Start at Origin and sketch the 8 lines, Fig. 2. Fig. 1. Origin
Chapter 1 Simple Machines Body A. Sketch. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Right Plane in the Feature Manager and click Sketch on the context toolbar, Fig. 1. Step 3. Click
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
Simple Machines. Wheel. in the Feature Manager and click Sketch. on the Command Manager toolbar.
Chapter 3 Simple Machines Wheel A. Wheel. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Right Plane from the Content toolbar, Fig. 1. in the Feature Manager and click Sketch Step 3. Click
Body. Chapter 1. Simple Machines. A. New Part. Step 1. Click File Menu > New.
Chapter 1 A. New Part. Step 1. Click File Menu > New. Simple Machines Body Step 2. Click Part from the list and click OK, Fig. 1. B. Sketch Construction Rectangle. Step 1. Click Right Plane in the Feature
Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide
Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Abstract After completing this workshop, you will have a basic understanding of editing 3D models using Autodesk Fusion 360 TM to
JSS. Ping Pong Ball. in the Feature Manager and click Sketch on the Context toolbar, Fig. 1. on the Sketch toolbar.
Chapter 18 JSS Ping Pong Ball A. Half Circle Sketch. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch on the Context toolbar, Fig.
ME Week 5 Project 4 ilogic Part 3
1 Project 4 - Use FindRow Excel Snippet 1.1 Parameter Setup In this section of the project, you will retrieve data from Excel to set a multi-value list for a parameter, then identify which row will be
Tail Hook. Chapter 14. Airplane. A. Construction Rectangle. Step 1. Click File Menu > New, click Part and OK.
Chapter 14 Airplane Tail Hook A. Construction Rectangle. Step 1. Click File Menu > New, click Part and OK. Step 2. Click Right (plane) in the Feature Manager and click Sketch from the Content toolbar,
CO2 Rail Car. Wheel Rear Px. on the Command Manager toolbar.
Chapter 6 CO2 Rail Car Wheel Rear Px A. Sketch Construction Lines. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front (plane) in the Feature Manager (left panel), Fig. 1. Step
Tutorial Second Level
AutoCAD 2018 Tutorial Second Level 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
Lesson 12 Bottom-Up Assembly Modeling
Lesson 12 Bottom-Up Assembly Modeling Upon successful completion of this lesson, you will be able to: Create a new assembly. Insert components into an assembly using all available techniques. Add mating
Battery Holder 2 x AA
Chapter 22 JSS Battery Holder 2 x AA A. Front Extrude. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Front Plane in the Feature Manager and click Sketch from the Context toolbar,
Lesson 4: Assembly Basics
4 Lesson 4: Assembly Basics Goals of This Lesson Understand how parts and assemblies are related. Create and modify the part Tutor2 and create the Tutor assembly. Tutor1 Tutor2 Tutor assembly Before Beginning
SolidWorks 2013 and Engineering Graphics
SolidWorks 2013 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following
Battery Holder. Chapter 9. Boat. A. Front Extrude. Step 1. Click File Menu > New, click Part and OK. SolidWorks 10 BATTERY HOLDER AA BOAT Page 9-1
Chapter 9 Boat Battery Holder A. Front Extrude. Step 1. Click File Menu > New, click Part and OK. AA Step 2. Click Front (plane) in the Feature Manager and click Sketch from the Content toolbar, Fig. 1.
SOLIDWORKS Parametric Modeling with SDC. Covers material found on the CSWA exam. Randy H. Shih Paul J. Schilling
Parametric Modeling with SOLIDWORKS 2015 Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF
SolidWorks 2014 Part II - Advanced Techniques
SolidWorks 2014 Part II - Advanced Techniques Parts, Surfaces, Sheet Metal, SimulationXpress, Top-Down Assemblies, Core and Cavity Molds Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices.
SIEMENS. Modeling assemblies. Self-Paced Training. spse01540
SIEMENS Modeling assemblies Self-Paced Training spse01540 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle Management Software
Spring Assembly. in the Begin Assembly Property. on the Standard toolbar and click Add-Ins.
Chapter 2 Spring Assembly A. Create New Assembly. Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click Cancel Manager. in the Begin Assembly Property B. Enable Toolbox Browser. Step 1. If
Fusion 360: Bridging Concept Design and Mechanical Design
Fusion 360: Bridging Concept Design and Mechanical Design Tanner Reid Autodesk Sachlene Singh - Autodesk CD7049-L Learning Objectives At the end of this class, you will be able to: Conceptualize multiple
Autodesk Inventor 2019 and Engineering Graphics
Autodesk Inventor 2019 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
Parametric Modeling with SolidWorks
Parametric Modeling with SolidWorks 2012 LEGO MINDSTORMS NXT Assembly Project Included Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
Parametric Modeling with SOLIDWORKS 2017
Parametric Modeling with SOLIDWORKS 2017 NEW Contains a new chapter on 3D printing Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices.
SOLIDWORKS 2016 and Engineering Graphics
SOLIDWORKS 2016 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
Parametric Modeling with. Autodesk Fusion 360. First Edition. Randy H. Shih SDC. Better Textbooks. Lower Prices.
Parametric Modeling with Autodesk Fusion 360 First Edition Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
Lesson: Lightweighting of Robot Gripper Arm
Lesson: Lightweighting of Robot Gripper Arm This functionality is only available in Fusion 360 Ultimate. In this exercise we'll perform a Shape Optimization study to reduce the weight of a robot gripper
SolidWorks 2013 Part II - Advanced Techniques
SolidWorks 2013 Part II - Advanced Techniques Parts, Surfaces, Sheet Metal, SimulationXpress, Top-Down Assemblies, Core and Cavity Molds Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff
Technical Education Services
Autodesk Fusion 360: Introduction to Parametric Modeling Course Length: 3 days Official Training Guide The Autodesk Fusion 360 Introduction to Parametric Modeling training course provides you with an understanding
Chapter 19 Assembly Modeling with the TETRIX by Pitsco Building System Autodesk Inventor
Tools for Design Using AutoCAD and Autodesk Inventor 19-1 Chapter 19 Assembly Modeling with the TETRIX by Pitsco Building System Autodesk Inventor Create and Use Subassemblies in Assemblies Creating an
Module 6B: Creating Poly-Conic Sheet Metal Pieces for a Spherical Space
1 Module 6B: Creating Poly-Conic Sheet Metal Pieces for a Spherical Space In Module 6B, we will learn how to create a folded 3D model of an approximate 2D flat pattern for a 120-inch or 10-foot diameter
COPYRIGHT DASSAULT SYSTEMES Version 5 Release 19 January 2009 EDU-CAT-EN-ASL-FS-V5R19
CATIA Training CATIA Aerospace Sheet Metal Design Detailed Steps COPYRIGHT DASSAULT SYSTEMES Version 5 Release 19 January 2009 EDU-CAT-EN-ASL-FS-V5R19 Table of Contents Additional Exercise: Aerostructure...3
Autodesk Inventor 2016
Parametric Modeling with Autodesk Inventor 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
ME009 Engineering Graphics and Design CAD 1. 1 Create a new part. Click. New Bar. 2 Click the Tutorial tab. 3 Select the Part icon. 4 Click OK.
PART A Reference: SolidWorks CAD Student Guide 2014 2 Lesson 2: Basic Functionality Active Learning Exercises Creating a Basic Part Use SolidWorks to create the box shown at the right. The step-by-step
Chapter 4 Feature Design Tree
4-1 Chapter 4 Feature Design Tree Understand Feature Interactions Use the FeatureManager Design Tree Modify and Update Feature Dimensions Perform History-Based Part Modifications Change the Names of Created
SIEMENS. Modeling assemblies. Self-Paced Training. spse01540
SIEMENS Modeling assemblies Self-Paced Training spse01540 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens Product Lifecycle Management Software
Autodesk Fusion 360: Model. Overview. Modeling techniques in Fusion 360
Overview Modeling techniques in Fusion 360 Modeling in Fusion 360 is quite a different experience from how you would model in conventional history-based CAD software. Some users have expressed that it
SOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users
SOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users The premium provider of learning products and solutions www.cadartifex.com Table of Contents Dedication... 3 Preface... 15 Part 1. Introducing
Autodesk Inventor 2018
Parametric Modeling with Autodesk Inventor 2018 NEW Contains a new chapter on 3D printing Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
Solid Problem Ten. In this chapter, you will learn the following to World Class standards:
C h a p t e r 11 Solid Problem Ten In this chapter, you will learn the following to World Class standards: 1. Sketch of Solid Problem Ten 2. Starting a 3D Part Drawing 3. Modifying How the UCS Icon is
Delta Dart. Propeller. in the Feature Manager and click Sketch from the Content toolbar, Fig. 1. on the Sketch toolbar.
Chapter 8 Delta Dart Propeller A. Base for Blade. Step 1. Click File Menu > New, click Part Metric and OK. Step 2. Click Top Plane in the Feature Manager and click Sketch from the Content toolbar, Fig.
Learning. Modeling, Assembly and Analysis SOLIDWORKS Randy H. Shih SDC. Better Textbooks. Lower Prices.
Learning SOLIDWORKS 2016 Modeling, Assembly and Analysis Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
CO 2 Shell Car. Body. in the Feature Manager and click Sketch from the context toolbar, Fig. 1. on the Standard Views toolbar.
CO 2 Shell Car Chapter 2 Body A. Save as "BODY". Step 1. If necessary, open your BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in BODY for the filename and press ENTER. B. FRONT Wheel Shell.
SolidCAM Training Course: Turning & Mill-Turn
SolidCAM Training Course: Turning & Mill-Turn imachining 2D & 3D 2.5D Milling HSS HSM Indexial Multi-Sided Simultaneous 5-Axis Turning & Mill-Turn Solid Probe SolidCAM + SolidWorks The Complete Integrated
Working with Neutral Format Surface and Solid Models in Autodesk Inventor
Working with Neutral Format Surface and Solid Models in Autodesk Inventor JD Mather Pennsylvania College of Technology Session ID ML205-1P In this class we will learn how to utilize neutral format data
M Autodesk. Press. Thomson Learning
.( '; f : 'L DANIEL T. BANACH-^ zzmechanical Desktop 4 Applying Designer and "Ässembly Modules M Autodesk Press Thomson Learning Africa Australia Canada Denmark Japan Mexico New Zealand Philippines Puerto
SOLIDWORKS: Lesson III Patterns & Mirrors. UCF Engineering
SOLIDWORKS: Lesson III Patterns & Mirrors UCF Engineering Solidworks Review Last lesson we discussed several more features that can be added to models in order to increase their complexity. We are now
Terminal. Chapter 16. E-Car. A. Component from Design Library. SOLIDWORKS 17 Terminal E-CAR Page 16-1
Chapter 16 E-Car Terminal A. Component from Design Library. Step 1. Click the Design Library tab in the Task Pane (right side of graphics area), Fig. 1. Step 2. Expand routing and click electrical folder
Animation and Mechanization Tutorial
Animation and Mechanization Tutorial Animation v. Mechanization Animation: Allows the operator to move the standard assembly constraints Distance (Mate, Align and Offset) taking periodic snapshots of the
Introduction To Finite Element Analysis
Creating a Part In this part of the tutorial we will introduce you to some basic modelling concepts. If you are already familiar with modelling in Pro Engineer you will find this section very easy. Before
LPKF Proto-Mat S103 Milling Operation Instructions
LPKF Proto-Mat S103 Milling Operation Instructions Created By Evan Clow ATAMI Oregon State University Created June 20, 2018 Revision Date Description Curator 0 7/24/2018 Initial Document Evan Clow LPKF
Tutorial: Using SolidWorks to assemble an off-the-shelf lens system
Tutorial: Using SolidWorks to assemble an off-the-shelf lens system Jennifer Harwell College of Optical Sciences, University of Arizona November 29, 2010 Introduction When designing an optical system,
Chapter 2 Parametric Modeling Fundamentals
2-1 Chapter 2 Parametric Modeling Fundamentals Create Simple Extruded Solid Models Understand the Basic Parametric Modeling Procedure Create 2-D Sketches Understand the "Shape before Size" Approach Use
Constructing treatment features
Constructing treatment features Publication Number spse01530 Constructing treatment features Publication Number spse01530 Proprietary and restricted rights notice This software and related documentation
Structural & Thermal Analysis Using the ANSYS Workbench Release 12.1 Environment
ANSYS Workbench Tutorial Structural & Thermal Analysis Using the ANSYS Workbench Release 12.1 Environment Kent L. Lawrence Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS
Step 1: Open the CAD model
In this exercise you will learn how to: Ground a part Create rigid groups Add joints and an angle motor Add joints and an angle motor Run both transient and statics motion analyses Apply shape controls
Chapter 39. Mastercam Jewelry Box Tray. A. Sketch Tray Circle. B. Twin Edge Point Circles. Mastercam 2017 Tray Jewelry Box Page 39-1
Mastercam 2017 Chapter 39 A. Sketch Tray Circle. Jewelry Box Tray Step 1. If necessary start a new Mastercam file, click New (Ctrl-N) on the Quick Access Toolbar QAT. Step 2. On the Wireframe tab click
MA416-9L: A View from the Top: Top-Down Design Methods in Autodesk Inventor
MA416-9L: A View from the Top: Top-Down Design Methods in Autodesk Inventor Mark Flayler IMAGINiT Technologies MA322-2L Autodesk Inventor has the ability to perform multiple top-down design techniques.
Airplane Assembly. SolidWorks 10 ASSEMBLY AIRPLANE Page 9-1
Chapter 9 A. Insert Parts. Airplane Assembly Step 1. Click File Menu > New, click Assembly and OK. Step 2. Click Keep Visible in the Property Manager, Fig. 1. Step 3. Click Browse in the Property Manager,
Belt Buckle A. Create Rectangle. Step 1. If necessary start a new Mastercam file, click New
Mastercam 2017 Chapter 35 Belt Buckle A. Create Rectangle. Step 1. If necessary start a new Mastercam file, click New (Ctrl-N) on the Quick Access Toolbar QAT. Step 2. On the Wireframe tab click Rectangle.
CATIA Electrical Space Reservation TABLE OF CONTENTS
TABLE OF CONTENTS Introduction...1 Manual Format...2 Electrical Reservations...3 Equipment Reservations...5 Pathway Reservations...31 Advanced Reservations...49 Reservation Analysis...67 Clash...69 Sectioning...73
Changes from SolidWorks 2003 to SolidWorks 2004
Changes from SolidWorks 2003 to SolidWorks 2004 The changes from SolidWorks 2003 to SolidWorks 2004 are primarily cosmetic. Consequently, it is quite easy to use the current edition of Learning SolidWorks
Wheels and Axle. Chapter 7. Simples Machines. A. Save As. Step 1. If necessary, open your Track Assembly 15 file. B. Insert Truck Assembly.
Chapter 7 Simples Machines Wheels and Axle A. Save As. Step 1. If necessary, open your Track Assembly 15 file. Step 2. Click File Menu > Save As. Step 3. Key-in WHEELS AND AXLE ASSEMBLY for the filename
Chapter 1. SolidWorks Overview
Chapter 1 SolidWorks Overview Objectives: When you complete this chapter you will: Have a good background knowledge of SolidWorks Have learnt how to start a SolidWorks session Understand the SolidWorks
Chapter 20 Assembly Model with VEX Robot Kit - Autodesk Inventor
Tools for Design Using AutoCAD and Autodesk Inventor 20-1 Chapter 20 Assembly Model with VEX Robot Kit - Autodesk Inventor Creating an Assembly Using Parts from the VEX Robot Kit Understand and Perform