The 3 Voxet axes can be annotated: Menu > Voxet > Tools > Annotate Voxet > Custom system.
|
|
|
- Shanon Harrison
- 6 years ago
- Views:
Transcription
1 Annotate Voxet The 3 Voxet axes can be annotated: Menu > Voxet > Tools > Annotate Voxet > Custom system. You can then enter the start and end coordinate values as well as custom labels. The annotation values will automatically be computed linearly along the length of the axis, allowing imperial coordinates to be plotted in a metric project or local grid coordinates in a UTM project. If you have a GOCAD Mining Suite tip you would like to share, let us know! support@mirageoscience.com GOCAD Mining Suite tip - December 2013
2 SGrid Fence Diagrams The Fence Diagram utility allows you to quickly display single and multiple stratigraphic grid sections as well as subvolumes. To access: Click on the Fence diagram button on the SGrid Attribute toolbar. Displaying one i, j and k section: Displaying every 20th i and j sections and one k section: Displaying k sections along displayed i and j sections: If you have a GOCAD Mining Suite tip you would like to share, let us know! support@mirageoscience.com GOCAD Mining Suite tip - November 2013
3 F11 for full screen In the spirit of conference season, we thought that this simple tip can maximize your audience s experience. When you are doing a presentation of your model or for taking a snapshot, you do not necessarily wish to show task panes, toolbars, menus etc. Press F11 for full screen mode. Press F11 again to revert back to normal screen. If you have a GOCAD Mining Suite tip you would like to share, let us know! support@mirageoscience.com GOCAD Mining Suite tip - October 2013
4 3 easy steps to create a custom binned Colormap 1. In the Objects Task Pane: Right-click on Colormaps > New Colormap > Enter a new Name > OK. It will be gray by default. 2. Using the (property) Attributes toolbar: Map your property to this new colormap > Choose appropriate Low clip and High clip values (0 and 2) > Click on the Edit Colormap button. 3. By default, the colormap is divided into 255 discrete colors: Add new anchors > Position them at the closest value to 0.5, 1, 1.5 and 1.75 > Split selected anchors > Designate their colors by name as shown below > OK. Named Colors: <0.5 = blue 0.5 to 1 = cyan 1 to 1.5 = magenta 1.5 to 1.75 = yellow >1.75 = red If you have a GOCAD Mining Suite tip you would like to share, let us know! support@mirageoscience.com GOCAD Mining Suite tip - September 2013
5 Decimate a surface If a surface has too many triangles, it can become heavy to manipulate in the 3D camera. Situations like these are where the Decimate a Surface Mesh tool can be very useful. It is found in Surface > Tools > Decimate. To decimate a surface take one point on the surface and its neighbouring points; create a medium plane through the surrounding points and then draw a line from the point perpendicular to the plane. If length of the line is less than the allowed tolerance, then the point will be removed. This is the maximum relief you allow to be deleted in this operation. This is the ratio of points after and before the decimation. E.g., if you enter 0.4, it will try to reduce the number of points in the surface by 60%. You may want to beautify the mesh for equilaterality afterwards (see September 2012 tip). Original surface Tolerance = 5; Convergence = 0.6 Tolerance = 1; Convergence = 0.6 Tolerance = 0.5; Convergence = 0.8 GOCAD Mining Suite tip - August 2013
6 How well does your wireframe surface fit the geological data constraints? Compute Error... When a surface has been interpolated to fit control points, the result will be smooth but not necessarily an exact match. The Compute Error command quantifies in distance how well the fit is: Surface > Constraints > Compute Error The error can be computed on the surface (controlled) and/or dataset (controller) object. Select the desired method and click on any blue control point constraint line. A new property will be created that you can view, display histogram, etc. The results can be refined by splitting the mesh and re-interpolating. Exact matches can be achieved by turning the surface control points within a distance tolerance into control nodes. Surface > Constraints > Control Nodes > Set from Control Points NEW: For additional details, click here to see the video GOCAD Mining Suite tip - July 2013
7 Interval geology logs on drillholes When adding geology to your drillholes from the ASCII drillhole importer, we recommend creating an interval log at the same time. These logs offer more flexibility than markers, zones and regions as they can be queried with the 3D-GIS utility using Geological Queries to find the first, last, nth occurrence of a unit (Class query) or two units that are in contact with each other (Contact query). They allow to place queried points that fall at the collar or end of hole in a region for easy filtering (PointSet > Tools > Region > Delete Points). Interval logs are projected on to 2D Section panels with the userdefined geology colourmap specific to your project and can be used in the crossplot and histogram tools. If you have a GOCAD Mining Suite tip you would like to share, let us know! support@mirageoscience.com GOCAD Mining Suite tip - June 2013
8 Proximity isoshell builder This command is ideal for performing shell queries since it quickly creates closed surfaces at a specified distance from nodes of an object. It generates a temporary 3D grid around the core object, computes the distance from each cell to the object and creates isosurfaces at a distance equivalent to the chosen Extent. You can increase the resolution to smooth out the shell or set it to -1 to automatically compute a default value. To preserve the interim Voxet, select Extract intermediate objects in Advanced Settings. The Proximity isoshell is the yellow icon on the GIS Shell Builder toolbar. GOCAD Mining Suite tip - May 2013
9 Using the region editor There are different ways of creating regions on objects, but we particularly enjoy using the very useful and flexible Region Editor tool. With this tool, new regions can be created and existing ones can be deleted or modified by adding or removing nodes. This editor provides a variety of features: digitizing polygons, clicking on a node and adding or removing rings of nodes, as well as switching between selected and non-selected nodes. GOCAD Mining Suite tip - April 2013
10 Masking grid properties with a closed curve Voxet or SGrid properties can be masked using a closed curve as the boundary. This could be helpful to null out data outside a property boundary or away from source data points by setting it to no-data values falling outside a vertical projection of a curve. The tool is a custom wizard: Applications-Wizards-Mira > Wizards-Mask > Grid Outside > Closed Curve GOCAD Mining Suite tip - March 2013
11 Creating a 3D PDF GOCAD Mining Suite models can be exported into 3D PDF files. In Adobe, the model can be spun and zoomed in 3D, objects can be turned on and off, and some attributes can be changed, such as displaying surface meshes and turning bounding boxes on and off. > Simply display the objects you want to export to the camera. > Ensure their extents are all contained in the same coordinate space by pressing the global view icon. > Set your desired view, which is preserved in the.pdf, then click on the Export Camera to PDF3D icon. Tip of the Month Export GOCAD objects to 3D PDF file. GOCAD Mining Suite tip - February 2013
12 Multiple 3D Isosurfaces Wizard The normally manual process of creating a series of multiple Isosurfaces from a 3D Grid property has been incorporated into the following wizard: Surface > New > From Grid > Create a Set of Isosurfaces from a Grid Property Did you know Wizards can be written by anyone and easily incorporated into GOCAD Mining Suite manually or automatically. They streamline processes by automating a series of commands into one or more dialog environments. Many built-in wizards are already available and custom ones are always being created for common and user requested functions. These can all be found here: Applications > Wizards > Mira Wizards; as well as within the object menu system. GOCAD Mining Suite tip - January 2013
Target Lithology Voxels
Target Lithology Voxels The Target Lithology Voxels tool enables you to create a 3D grid (voxel) based on data contained in a string channel within a from-to drillhole database. A lithology voxel can be
Target 3D Geology Surfaces
Target 3D Geology Surfaces The Target 3D Geology Surfaces (Contact Surface from Geology Grids) tool enables you to create subsurface topography grids, where the "Z" values correspond to the elevation of
GOCAD Mining Suite 17 update1 - Release notes
GOCAD Mining Suite 17 update1 - Release notes 2018 Paradigm B. V. and Mira Geoscience Limited. All rights reserved. The information in this document is subject to change without notice and should not be
hereby recognizes that Timotej Verbovsek has successfully completed the web course 3D Analysis of Surfaces and Features Using ArcGIS 10
3D Analysis of Surfaces and Features Using ArcGIS 10 Completed on September 5, 2012 3D Visualization Techniques Using ArcGIS 10 Completed on November 19, 2011 Basics of Map Projections (for ArcGIS 10)
Organizing and Summarizing Data
1 Organizing and Summarizing Data Key Definitions Frequency Distribution: This lists each category of data and how often they occur. : The percent of observations within the one of the categories. This
Highline Excel 2016 Class 09: Date Functions
Highline Excel 2016 Class 09: Date Functions Table of Contents Date Functions... 2 Examples of EOMONTH, EDATE and DATE functions:... 2 Fiscal Year... 3 Example of Data Set with Date Helper Columns, including
v SMS 11.1 Tutorial Overview Time minutes
v. 11.1 SMS 11.1 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. It is suggested that this tutorial
Example. Section: PS 709 Examples of Calculations of Reduced Hours of Work Last Revised: February 2017 Last Reviewed: February 2017 Next Review:
Following are three examples of calculations for MCP employees (undefined hours of work) and three examples for MCP office employees. Examples use the data from the table below. For your calculations use
v Overview SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
Introduction to ANSYS FLUENT Meshing
Workshop 04 CAD Import and Meshing from Conformal Faceting Input 14.5 Release Introduction to ANSYS FLUENT Meshing 2011 ANSYS, Inc. December 21, 2012 1 I Introduction Workshop Description: CAD files will
Converting AutoCAD Map 2002 Projects to ArcGIS
Introduction This document outlines the procedures necessary for converting an AutoCAD Map drawing containing topologies to ArcGIS version 9.x and higher. This includes the export of polygon and network
v SMS 11.2 Tutorial Overview Prerequisites Requirements Time Objectives
v. 11.2 SMS 11.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
v Working with Rasters SMS 12.1 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
iric Software Changing River Science River2D Tutorials
iric Software Changing River Science River2D Tutorials iric Software Changing River Science Confluence of the Colorado River, Blue River and Indian Creek, Colorado, USA 1 TUTORIAL 1: RIVER2D STEADY SOLUTION
SCENE FILE MANIPULATION SCENE FILE MANIPULATION GETTING STARTED MODELING ANIMATION MATERIALS + MAPPING RENDERING. Saving Files. Save.
SCENE FILE MANIPULATION SCENE FILE MANIPULATION There are several things you can do with a scene file in 3ds Max. You can save a file, save a file temporarily and retrieve it, and combine scene files.
Tetra4D Reviewer. Version 5.1. User Guide. Details on how to use Tetra4D Reviewer.
Tetra4D Reviewer Version 5.1 User Guide Details on how to use Tetra4D Reviewer. ii Contents Chapter 1: Work area... 7 Looking at the work area... 7 Toolbars and toolbar presets... 8 About toolbars and
Target Drillhole Mapping
Target Drillhole Mapping The Target system enables you to create a new blank map to fit a defined data range. The data range can be entered manually, or it can be determined from the range of selected
Working with Target for ArcGIS Drillhole Tools
Working with Target for ArcGIS Drillhole Tools This Working with Target for ArcGIS Drillhole Tools How-to Guide walks you through setting up a new Target for ArcGIS drillhole project, importing data into
Guide to Mapping Website (Public) December 2016 GC_236594
Guide to Mapping Website (Public) December 2016 GC_236594 Table of Contents Guide to Mapping Website (Public)... 1 December 2016... 1 Quick Start... 3 Map Layers... 4 How do I?... 5 Draw on the Map...
IDL Tutorial. Working with Images. Copyright 2008 ITT Visual Information Solutions All Rights Reserved
IDL Tutorial Working with Images Copyright 2008 ITT Visual Information Solutions All Rights Reserved http://www.ittvis.com/ IDL is a registered trademark of ITT Visual Information Solutions for the computer
Intellicus Enterprise Reporting and BI Platform
Designing Adhoc Reports Intellicus Enterprise Reporting and BI Platform Intellicus Technologies info@intellicus.com www.intellicus.com Designing Adhoc Reports i Copyright 2012 Intellicus Technologies This
Creating USNG Mapbooks
Creating USNG Mapbooks This is a basic guide for creating a map book based on the U.S. National Grid (USNG), using Data Driven Pages in ArcMap. Data Driven Pages is a feature of ArcMap that was added at
STL Rapid Prototyping
CATIA V5 Training Foils STL Rapid Prototyping Version 5 Release 19 January 2009 EDU_CAT_EN_STL_FI_V5R19 1 About this course Objectives of the course Upon completion of this course you will learn how to
Shape Sculptor Version 5 Release 13. Shape Sculptor
Shape Sculptor Page 1 Overview Using This Guide Where to Find More Information What's New? Getting Started Entering the Workbench Importing a Polygonal Mesh Decimating a Polygonal Mesh User Tasks Input
v Importing Rasters SMS 11.2 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
COMPUTER TRAINING CENTER
Excel 2007 Introduction to Spreadsheets COMPUTER TRAINING CENTER 1515 SW 10 th Avenue Topeka KS 66604-1374 785.580.4606 class@tscpl.org www.tscpl.org Excel 2007 Introduction 1 Office button Quick Access
Scalar Field Visualization I
Scalar Field Visualization I What is a Scalar Field? The approximation of certain scalar function in space f(x,y,z). Image source: blimpyb.com f What is a Scalar Field? The approximation of certain scalar
ArcView QuickStart Guide. Contents. The ArcView Screen. Elements of an ArcView Project. Creating an ArcView Project. Adding Themes to Views
ArcView QuickStart Guide Page 1 ArcView QuickStart Guide Contents The ArcView Screen Elements of an ArcView Project Creating an ArcView Project Adding Themes to Views Zoom and Pan Tools Querying Themes
Transforming Objects and Components
4 Transforming Objects and Components Arrow selection Lasso selection Paint selection Move Rotate Scale Universal Manipulator Soft Modification Show Manipulator Last tool used Figure 4.1 Maya s manipulation
3DReshaper Help DReshaper Beginner's Guide. Surveying
3DReshaper Beginner's Guide Surveying 1 of 29 Cross sections Exercise: Tunnel analysis Surface analysis Exercise: Complete analysis of a concrete floor Surveying extraction Exercise: Automatic extraction
MS PowerPoint Module 2
MS PowerPoint Module 2 Revised 1/1/17 Table of Contents Table of Contents... 2 Topics... 3 Exercises... 3 Objectives... 3 Clip Art... 4 New Slide... 6 Exercise 2A - Add ClipArt to a Slide... 10 5. Do not
Introduction to Geospatial Analysis
Introduction to Geospatial Analysis Introduction to Geospatial Analysis 1 Descriptive Statistics Descriptive statistics. 2 What and Why? Descriptive Statistics Quantitative description of data Why? Allow
Basic Tasks in ArcGIS 10.3.x
Basic Tasks in ArcGIS 10.3.x This guide provides instructions for performing a few basic tasks in ArcGIS 10.3.1, such as adding data to a map document, viewing and changing coordinate system information,
Your Prioritized List. Priority 1 Faulted gridding and contouring. Priority 2 Geoprocessing. Priority 3 Raster format
Your Prioritized List Priority 1 Faulted gridding and contouring Priority 2 Geoprocessing Priority 3 Raster format Priority 4 Raster Catalogs and SDE Priority 5 Expanded 3D Functionality Priority 1 Faulted
Tutorial 3. Correlated Random Hydraulic Conductivity Field
Tutorial 3 Correlated Random Hydraulic Conductivity Field Table of Contents Objective. 1 Step-by-Step Procedure... 2 Section 1 Generation of Correlated Random Hydraulic Conductivity Field 2 Step 1: Open
Workshop 1: Basic Skills
Workshop 1: Basic Skills 14.5 Release Introduction to ANSYS Fluent Meshing 2011 ANSYS, Inc. December 21, 2012 1 I Introduction Workshop Description: This workshop shows some of the clean up tools in Tgrid
Family Tree Maker Articles
Family Tree Maker Articles Year Month Title 1998 March First Column, Tips 1998 April Merging 1998 May Sources 1998 June Scrapbooks 1998 July Shortcuts and the INI File 1998 August Family Tree Maker, Version
Programming Logic and Design Sixth Edition
Objectives Programming Logic and Design Sixth Edition Chapter 6 Arrays In this chapter, you will learn about: Arrays and how they occupy computer memory Manipulating an array to replace nested decisions
Designing Adhoc Reports
Designing Adhoc Reports Intellicus Web-based Reporting Suite Version 4.5 Enterprise Professional Smart Developer Smart Viewer Intellicus Technologies info@intellicus.com www.intellicus.com Copyright 2009
Sinusoidal Data Worksheet
Sinusoidal Data Worksheet West Coast Tidal Analysis: Fill in the following chart for the low tide and high tides per day for the researched two-day period (so four low tides and high tides all inter-distributed)
Module Two: Clip Art and Tables
Module Two: Clip Art and Tables Graphic elements are added to the slides to support the information you are sharing and they also make the presentation more interesting for the audience. In this module
Contents 10. Graphs of Trigonometric Functions
Contents 10. Graphs of Trigonometric Functions 2 10.2 Sine and Cosine Curves: Horizontal and Vertical Displacement...... 2 Example 10.15............................... 2 10.3 Composite Sine and Cosine
Fastening Review Overview Basic Tasks DMU Fastening Review Interoperability Workbench Description Customizing Index
Fastening Review Overview Conventions Basic Tasks Displaying Joined Parts in a Balloon Running the Fastening Rules Analysis Reporting Creating Structural Reports Creating Flat Reports DMU Fastening Review
Chapter 24. Creating Surfaces for Displaying and Reporting Data
Chapter 24. Creating Surfaces for Displaying and Reporting Data FLUENT allows you to select portions of the domain to be used for visualizing the flow field. The domain portions are called surfaces, and
PyPlot. The plotting library must be imported, and we will assume in these examples an import statement similar to those for numpy and math as
Geog 271 Geographic Data Analysis Fall 2017 PyPlot Graphicscanbeproducedin Pythonviaavarietyofpackages. We willuseapythonplotting package that is part of MatPlotLib, for which documentation can be found
Tutorial 4: Texture Mapping Techniques
Tutorial 4: Texture Mapping Techniques Completion time 40 minutes In the previous tutorial we learned how to create materials, and how to assign texture maps to those materials. In this tutorial we will
Getting Started Guide
Getting Started Guide Design and Create 3D PDF Documents Tetra4D Converter - Add in for Adobe Acrobat Pro 1 of 10 After the installation of Tetra4D Converter, start Acrobat 2 of 10 Click on Tools in the
Manipulating the Boundary Mesh
Chapter 7. Manipulating the Boundary Mesh The first step in producing an unstructured grid is to define the shape of the domain boundaries. Using a preprocessor (GAMBIT or a third-party CAD package) you
v SMS Tutorials Working with Rasters Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Objectives Learn how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots, and interpolate
Annual Maintenance & Services Offer
Annual Maintenance & Services Offer 2014-2015 Release Notes Datamine Studio Version 3.24.25.0. Contents What s New for Datamine Studio MR24 2 Main Messages for this version of Datamine Studio 2 Technical
Boot Camp-Special Ops Challenge Quiz
1. What s the key difference between a panel and dialog window? a. There is none b. Panels must be closed in order to continue editing, whereas dialogs can be left open c. Dialogs must be closed in order
Working with Spreadsheets in Target
Working with Spreadsheets in Target This How-To Guide walks you through displaying, editing and processing Geosoft database data in the Spreadsheet view. Spreadsheets When you create or open a database,
Combine Yield Data From Combine to Contour Map Ag Leader
Combine Yield Data From Combine to Contour Map Ag Leader Exporting the Yield Data Using SMS Program 1. Data format On Hard Drive. 2. Start program SMS Basic. a. In the File menu choose Open. b. Click on
Display Layers in Geosoft 3D View
Use the New 2D/3D Workflow features in Target for ArcGIS In Target for ArcGIS version 3.5, there are three new interconnected features that make integrating 2D and 3D data in plan and section maps easier.
Biodiversity Interactive Map
Powered by MapShare Biodiversity Interactive Map (BIM) User Tips The Biodiversity Interactive Map (BIM) is accessible via the Department of Environment and Primary Industries (DEPI) website at www.depi.vic.gov.au.
Import a CAD Model 2018
Import a CAD Model 2018 Import CAD Model In this tutorial you will import a CAD file, then add a 500 kw burner fire. Figure 1. Burner fire in this example This tutorial demonstrates how to: Import a CAD
Module 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
Module Four: Charts and Media Clips
Module Four: Charts and Media Clips Charts, sometimes called graphs, are a way to present detailed data to an audience in an easy to understand visual format. Media clips can turn your presentation into
PyPlot. The plotting library must be imported, and we will assume in these examples an import statement similar to those for numpy and math as
Geog 271 Geographic Data Analysis Fall 2015 PyPlot Graphicscanbeproducedin Pythonviaavarietyofpackages. We willuseapythonplotting package that is part of MatPlotLib, for which documentation can be found
ArcCatalog or the ArcCatalog tab in ArcMap ArcCatalog or the ArcCatalog tab in ArcMap ArcCatalog or the ArcCatalog tab in ArcMap
ArcGIS Procedures NUMBER OPERATION APPLICATION: TOOLBAR 1 Import interchange file to coverage 2 Create a new 3 Create a new feature dataset 4 Import Rasters into a 5 Import tables into a PROCEDURE Coverage
Section 8. 8 Format Editor
Section 8 8 Format Editor The Format Editor allows the creation and editing of the log presentation or format files. The output of the format editor are files of the type *.prs which are subsequently used
Tricks and Tips of Creating a Layered, Geo-Enabled Adobe PDF Map
Tricks and Tips of Creating a Layered, Geo-Enabled Adobe PDF Map John M. Bocan GIS Programmer/Analyst West Virginia Geological and Economic Survey (WVGES) Digital Mapping Techniques Williamsburg, VA. May
Chapter 2 Surfer Tutorial
Chapter 2 Surfer Tutorial Overview This tutorial introduces you to some of Surfer s features and shows you the steps to take to produce maps. In addition, the tutorial will help previous Surfer users learn
Datamine Solutions for Industrial Minerals and Construction Materials, including Dimension Stones.
Datamine Solutions for Industrial Minerals and Construction Materials, including Dimension Stones. Datamine Overview Global Presence 250 staff in 12 countries Canada, USA, Peru, Chile, Mexico, Brazil,
Adobe Photoshop Sh S.K. Sublania and Sh. Naresh Chand
Adobe Photoshop Sh S.K. Sublania and Sh. Naresh Chand Photoshop is the software for image processing. With this you can manipulate your pictures, either scanned or otherwise inserted to a great extant.
Designing Adhoc Reports
Designing Adhoc Reports Intellicus Enterprise Reporting and BI Platform Intellicus Technologies info@intellicus.com www.intellicus.com Copyright 2010 Intellicus Technologies This document and its content
Development Authority of the North Country (DANC) Internet Mapping Application Instructions Public Viewer 1. Purpose. 2. Logging-in. 3.
Development Authority of the North Country (DANC) Internet Mapping Application Instructions Public Viewer 1. Purpose The purpose of this document is to outline basic functionality of the DANC Internet
DMU Space Analysis Version 5 Release 13. DMU Space Analysis
Page 1 DMU Space Analysis Preface Using This Guide More Information Conventions What's New? Getting Started Setting Up Your Session Measuring Minimum Distances Sectioning Detecting Clashes Measuring Between
L E S S O N 2 Background
Flight, Naperville Central High School, Naperville, Ill. No hard hat needed in the InDesign work area Once you learn the concepts of good page design, and you learn how to use InDesign, you are limited
4. If you are prompted to enable hardware acceleration to improve performance, click
Exercise 1a: Creating new points ArcGIS 10 Complexity: Beginner Data Requirement: ArcGIS Tutorial Data Setup About creating new points In this exercise, you will use an aerial photograph to create a new
Pre-Lab Excel Problem
Pre-Lab Excel Problem Read and follow the instructions carefully! Below you are given a problem which you are to solve using Excel. If you have not used the Excel spreadsheet a limited tutorial is given
Solid Conduction Tutorial
SECTION 1 1 SECTION 1 The following is a list of files that will be needed for this tutorial. They can be found in the Solid_Conduction folder. Exhaust-hanger.tdf Exhaust-hanger.ntl 1.0.1 Overview The
Encom Discover TM 2013
Encom Discover TM 2013 The release of Discover (and Discover 3D) 2013 from Pitney Bowes Software reinforces the Discover geoscience suite as the essential and innovative GIS toolbox for the Exploration
QuintusVisuals 1.2 for TIBCO Spotfire User's Manual
QuintusVisuals 1.2 for TIBCO Spotfire User's Manual Author: Quintus consultants b.v. Version: 1.2 Date: 11 January 2012 Quintus consultants b.v. provides and implements IT solutions. Quintus is specialized
Tutorial 7. Water Table and Bedrock Surface
Tutorial 7 Water Table and Bedrock Surface Table of Contents Objective. 1 Step-by-Step Procedure... 2 Section 1 Data Input. 2 Step 1: Open Adaptive Groundwater Input (.agw) File. 2 Step 2: Assign Material
Scheduling. Scheduling Tasks At Creation Time CHAPTER
CHAPTER 13 This chapter explains the scheduling choices available when creating tasks and when scheduling tasks that have already been created. Tasks At Creation Time The tasks that have the scheduling
Organizing Design Data
Organizing Design Data Module Overview This module explains how to use the data in different files for reference purposes. Module Prerequisites Knowledge of MicroStation s interface Some knowledge about
SETTLEMENT OF A CIRCULAR FOOTING ON SAND
1 SETTLEMENT OF A CIRCULAR FOOTING ON SAND In this chapter a first application is considered, namely the settlement of a circular foundation footing on sand. This is the first step in becoming familiar
Getting Started with DADiSP
Section 1: Welcome to DADiSP Getting Started with DADiSP This guide is designed to introduce you to the DADiSP environment. It gives you the opportunity to build and manipulate your own sample Worksheets
Unit #13 : Integration to Find Areas and Volumes, Volumes of Revolution
Unit #13 : Integration to Find Areas and Volumes, Volumes of Revolution Goals: Beabletoapplyaslicingapproachtoconstructintegralsforareasandvolumes. Be able to visualize surfaces generated by rotating functions
Introduction to GIS & Mapping: ArcGIS Desktop
Introduction to GIS & Mapping: ArcGIS Desktop Your task in this exercise is to determine the best place to build a mixed use facility in Hudson County, NJ. In order to revitalize the community and take
Pictometry for ArcGIS Desktop Local Release Notes
Version 10.4 The Desktop - Local 10.4 extension is compatible with ArcGIS Desktop 10.4. Version 10.3.2 This extension includes a new installer, which allows you to select a location (other than Program
(1B) Click Browse and select the AASPI-format file (*.H) that you want to display. After you browse the file, the Colorbar file name (1C), plot title
QC PLOTTING OF AASPI-FORMAT DATA AND ATTRIBUTES Program aaspi_plot The AASPI QC Plotting tab To further quality control the conversion process, you will wish to plot your data before computing seismic
Scalar Visualization
Scalar Visualization 5-1 Motivation Visualizing scalar data is frequently encountered in science, engineering, and medicine, but also in daily life. Recalling from earlier, scalar datasets, or scalar fields,
Learn the various 3D interpolation methods available in GMS
v. 10.4 GMS 10.4 Tutorial Learn the various 3D interpolation methods available in GMS Objectives Explore the various 3D interpolation algorithms available in GMS, including IDW and kriging. Visualize the
MAP OF OUR REGION. About
About ABOUT THE GEORGIA BULLETIN The Georgia Bulletin is the Catholic newspaper for the Archdiocese of Atlanta. We cover the northern half of the state of Georgia with the majority of our circulation being
Bentley OpenRoads Workshop 2017 FLUG Fall Training Event
Bentley OpenRoads Workshop 2017 FLUG Fall Training Event F-2P - QuickStart for Roadway Modeling in OpenRoads Technology Bentley Systems, Incorporated 685 Stockton Drive Exton, PA 19341 www.bentley.com
Technical Documentation Version 7.3 Output
Technical Documentation Version 7.3 Output These documents are copyrighted by the Regents of the University of Colorado. No part of this document may be reproduced, stored in a retrieval system, or transmitted
GIS IN ECOLOGY: CREATING RESEARCH MAPS
GIS IN ECOLOGY: CREATING RESEARCH MAPS Contents Introduction... 2 Elements of Cartography... 2 Course Data Sources... 3 Tasks... 3 Establishing the Map Document... 3 Laying Out the Map... 5 Exporting Your
DeVry University Houston
DeVry University Houston Faculty Orientation Manual IN THIS SECTION: Teaching Contracts & Payment Teaching Contracts Payment Terms Change of Address or Contact Information Section 2 Tax Information TEACHING
LEAPFROG GEOTHERMAL 3.4
LEAPFROG GEOTHERMAL LEAPFROG GEOTHERMAL 3.4 Technical Release Notes This document outlines the major features and improvements in Leapfrog Geothermal 3.4 Document Version 1 LEAPFROG GEOTHERMAL 3.4 New
Exercise 3-1: Soil property mapping
Exercise 3-1: Soil property mapping Mapping objectives: Create a soil analysis point layer from tabular data in QGIS Create a continuous surface soil property map using Kriging Interpolation in SAGA GIS
Creating Printed Output
Creating Printed Output Module Overview This module will help you to become familiar with the options that let you produce quality printed output. Module Prerequisites Fundamental knowledge of the Microsoft
Overview of ArcGIS Online Applications. Champaign County
Overview of ArcGIS Online Applications Champaign County Champaign County GIS Consortium Updated: April 2017 Table of Contents ArcGIS Online Application Overview... 3 Map Interface Symbology and Terminology...
Arrays. What if you have a 1000 line file? Arrays
Arrays Chapter 8 page 477 11/8/06 CS150 Introduction to Computer Science 1 1 What if you have a 1000 line file? Read in the following file and print out a population graph as shown below. The maximum value
Tutorial 6. Pumping Well and River
Tutorial 6 Pumping Well and River Table of Contents Objective. 1 Step-by-Step Procedure... 2 Section 1 Data Input. 2 Step 1: Open Adaptive Groundwater Input (.agw) File. 2 Step 2: Pumping Well Design Database
Overview of the SMS Interface for the CMS and New CIRP Additions: CIRP Wiki and CMS Discussion List
Overview of the SMS Interface for the CMS and New Additions: Wiki and CMS Discussion List Mitch Brown Coastal and Hydraulics Laboratory Engineer Research and Development Center May 20, 2010 US Army Corps
Press the Plus + key to zoom in. Press the Minus - key to zoom out. Scroll the mouse wheel away from you to zoom in; towards you to zoom out.
Navigate Around the Map Interactive maps provide many choices for displaying information, searching for more details, and moving around the map. Most navigation uses the mouse, but at times you may also
Desktop Studio: Charts. Version: 7.3
Desktop Studio: Charts Version: 7.3 Copyright 2015 Intellicus Technologies This document and its content is copyrighted material of Intellicus Technologies. The content may not be copied or derived from,
Trimble Survey GNSS Firmware Version 5.01 (April 2015) The following table identifies the Survey GNSS receivers supported by this revision.
RELEASE NOTES 15 APRIL 2015 TRIMBLE SURVEY GNSS FIRMWARE Trimble Survey GNSS Firmware Version 5.01 (April 2015) Requirements This firmware version includes improvements to the Survey Receiver firmware.