Appendix R. ESATAN Thermal Modelling Suite Product Developments. Chris Kirtley (ITP Engines UK, United Kingdom)
|
|
|
- Eleanore Morrison
- 5 years ago
- Views:
Transcription
1 211 Appendix R ESATAN Suite Product Developments Chris Kirtley (ITP Engines UK, United Kingdom) 31 st European Space Workshop October 2017
2 212 ESATAN Suite Product Developments Abstract A major focus of ESATAN-TMS development this year has been on providing facilities within Workbench to meet current and future requirements of space projects, and to provide features in direct response to requests from Customers. This presentation will outline all the developments going into ESATAN-TMS st European Space Workshop October 2017
3 ESATAN Suite Product Developments 213 ESATAN TMS Product Status Chris Kirtley 31 st European & ECLS Software Workshop October 2017, ESA/Estec, Noordwijk, The Netherlands Introduction ESATAN TMS 2018 introduces new functionalities to meet project and customer requirements Present new features within the release 31 st European Space Workshop October 2017
4 214 ESATAN Suite Product Developments Torus Primitive Torus primitive now supported Requested by customers Shell and solid geometry Support cutting shell Torii Defined by Points or Parameters Accurate radiative analysis Image Courtesy of Ariane Group 31 st European Space Workshop October 2017
5 ESATAN Suite Product Developments 215 Torus Primitive Additional interactive construction methods Define By 2 Circles Save the attachment to disk or (double) click on the picture to run the movie. 31 st European Space Workshop October 2017
6 216 ESATAN Suite Product Developments Torus Primitive Additional interactive construction methods Define By 2 Circles or By Circle & Axis Save the attachment to disk or (double) click on the picture to run the movie. 31 st European Space Workshop October 2017
7 ESATAN Suite Product Developments 217 Extended Visualisation Easy visualisation of application regions Boundary Conditions Contact Zones, Conductor Interfaces User Defined Conductors Extended display control Now at face level Extended Visualisation Easy visualisation of application regions Boundary Conditions Contact Zones, Conductor Interfaces User Defined Conductors Extended display control Now at face level 31 st European Space Workshop October 2017
8 218 ESATAN Suite Product Developments Extended Visualisation Easy visualisation of application regions Boundary Conditions Contact Zones, Conductor Interfaces User Defined Conductors Extended display control Now at face level Simplified model construction, validation and post processing Save the attachment to disk or (double) click on the picture to run the movie. 31 st European Space Workshop October 2017
9 219 ESATAN Suite Product Developments Extended Visualisation Second Clipping Plane now available General / flexible rename of any entity Save the attachment to disk or (double) click on the picture to run the movie. 31st European Space Workshop October 2017
10 220 ESATAN Suite Product Developments Extended Visualisation Extended highlighting of errors Help with model construction and validation Extended Visualisation Extended highlighting of errors Help with model construction and validation Improve Workbench usability Drag and drop of language files 31 st European Space Workshop October 2017
11 221 ESATAN Suite Product Developments Save the attachment to disk or (double) click on the picture to run the movie. Control of Node Numbers Extended control of node numbers ESATAN TMS 2017 introduced assigning blocks of node numbers to selected geometry Now extended to control node increment within each meshing direction 31st European Space Workshop October 2017
12 222 ESATAN Suite Product Developments Extended Requirement from projects to model angle dependent surface optical properties Support for optical properties varying with incident angle of radiation Emissivity, transmissivity and reflectivity Diffuse reflectivity automatically derived Hemispherical value calculated 31 st European Space Workshop October 2017
13 ESATAN Suite Product Developments 223 Extended Model variation in planet albedo reflectance Requested by many customers Definition of albedo at given longitude and latitude positions Option to import albedo map Improved planet display Report temperature / albedo at selected points Vector displaying the Planet Sun direction 31 st European Space Workshop October 2017
14 224 ESATAN Suite Product Developments Integration of Data Efficient data handling is key to providing an effective thermal modelling environment ESATAN TMS 2016 introduced optimised solution with the ACD file Significant improvements in performance Significant reduction in file size and memory Now extended to store property data (arrays/tables) Time or/and temperature General 2D/3D Thermostatic Control Thermostatically controlled heaters Define control within Workbench Steady state and transient operation Transient: On/Off or Proportional Steady State: Fixed, Setpoint or Proportional Set point mode automatically calculates steady state heat loads Library routines to define and report heater status Applied load, duty cycle, number of switches, 31 st European Space Workshop October 2017
15 ESATAN Suite Product Developments 225 Initial Temperatures Common practice to chain cases, initialising temperatures from previous case Currently supported by SAVET / FETCHT Request from customers to increase flexibility Initialise temperatures from a selected TMD file at a given time Cases easily rerun without Preprocessing Monitor Extended control of thermal analysis Launch analysis in the background View progress Close/reopen the model process results to assess progress Terminate / Stop analysis if required 31 st European Space Workshop October 2017
16 226 ESATAN Suite Product Developments process processing Flexible post processing of results within Workbench Animation of results on geometry Animation of assembly movement Control of displayed geometry 31 st European Space Workshop October 2017
17 227 ESATAN Suite Product Developments Save the attachment to disk or (double) click on the picture to run the movie. processing Chart results within ESATAN TMS 2017 Attribute and Heat Charts Chart nodal results, heat balance and heat flow Chart nodes and containers ESATAN TMS 2018 Extended for weighted average temperature process all nodes with thermal model 31st European Space Workshop October 2017
18 228 ESATAN Suite Product Developments processing Extended for Delta Charts Compare multiple cases against a reference case Compare against fixed or time varying reference Compare any attribute for selected nodes/containers Control series to display Value Reference Delta processing Extended for Limits Charts Comparison of multiple cases against limit data Graphical and/or tabular display Export image and data for inclusion in reports 31 st European Space Workshop October 2017
19 ESATAN Suite Product Developments 229 ESATAN TMS 2018 ESATAN TMS 2017 Service Pack to be released 31 st European Space Workshop October 2017
20 st European Space Workshop October 2017
Appendix S. ESATAN Thermal Modelling Suite Product Developments and Demonstration. Chris Kirtley Nicolas Bures (ITP Engines UK Ltd, United Kingdom)
249 Appendix S ESATAN Thermal Modelling Suite Product Developments and Demonstration Chris Kirtley Nicolas Bures (ITP Engines UK Ltd, United Kingdom) 250 ESATAN Thermal Modelling Suite Product Developments
Appendix Q. Modelling of complex satellite manoeuvres with ESATAN-TMS. Nicolas Bures (ITP Engines UK Ltd, United Kingdom)
227 Appendix Q Modelling of complex satellite manoeuvres with ESATAN-TMS Nicolas Bures (ITP Engines UK Ltd, United Kingdom) 228 Modelling of complex satellite manoeuvres with ESATAN-TMS Abstract Requirements
Appendix Q. ESATAN Thermal Modelling Suite Product Developments and Demonstration. Chris Kirtley Henri Brouquet (ITP Engines UK Ltd, United Kingdom)
235 Appendix Q ESATAN Thermal Modelling Suite Product Developments and Demonstration Chris Kirtley Henri Brouquet (ITP Engines UK Ltd, United Kingdom) 236 ESATAN Thermal Modelling Suite Product Developments
Steady-State and Transient Thermal Analysis of a Circuit Board
Steady-State and Transient Thermal Analysis of a Circuit Board Problem Description The circuit board shown below includes three chips that produce heat during normal operation. One chip stays energized
COOL-COVERINGS. André Santos, The Netherlands Copyright Active Space Technologies
COOL-COVERINGS André Santos, The Netherlands 21-03-2012 Copyright Active Space Technologies 2004-2011 Young and competent company Started in 2007 in Germany, in 2004 in Portugal Role Support scientific
Solving FSI Applications Using ANSYS Mechanical and ANSYS Fluent
Workshop Transient 1-way FSI Load Mapping using ACT Extension 15. 0 Release Solving FSI Applications Using ANSYS Mechanical and ANSYS Fluent 1 2014 ANSYS, Inc. Workshop Description: This example considers
Appendix B Submodeling Technique
Appendix B Submodeling Technique 16.0 Release Introduction to ANSYS Mechanical 1 2015 ANSYS, Inc. February 27, 2015 Chapter Overview In this chapter controlling meshing operations is described. Topics:
Appendix S. Data exchange for thermal analysis a status update
231 Appendix S Data exchange for thermal analysis a status update James Etchells Duncan Gibson Harrie Rooijackers Matthew Vaughan (ESA/ESTEC, The Netherlands) 232 Data exchange for thermal analysis a status
A new tool for 3D thermal modeling. Jean-Paul Dudon (Alcatel Alenia Space, France)
253 Appendix R A new tool for 3D thermal modeling Jean-Paul Dudon (Alcatel Alenia Space, France) 254 A new tool for 3D thermal modeling 255 A new tool for 3D thermal modeling JP Dudon, T Basset Alcatel
Finite Element Analysis using ANSYS Mechanical APDL & ANSYS Workbench
Finite Element Analysis using ANSYS Mechanical APDL & ANSYS Workbench Course Curriculum (Duration: 120 Hrs.) Section I: ANSYS Mechanical APDL Chapter 1: Before you start using ANSYS a. Introduction to
TMG: New Technologies and Modeling Approaches
TMG: New Technologies and Modeling Approaches Sixteenth European Thermal & ECLS Software Workshop 22-23 23 October 2002 Introduction to TMG Comprehensive thermal simulation software package Integrated
SimLab 14.3 Release Notes
SimLab 14.3 Release Notes Highlights SimLab 14.0 introduced new graphical user interface and since then this has evolved continuously in subsequent versions. In addition, many new core features have been
Appendix P. Multi-Physics Simulation Technology in NX. Christian Ruel (Maya Htt, Canada)
251 Appendix P Multi-Physics Simulation Technology in NX Christian Ruel (Maya Htt, Canada) 252 Multi-Physics Simulation Technology in NX Abstract As engineers increasingly rely on simulation models within
MAE Advanced Computer Aided Design. 02. Ansys Workbench Doc 01. Introduction to Ansys Workbench
MAE 656 - Advanced Computer Aided Design 02. Ansys Workbench Doc 01 Introduction to Ansys Workbench Main Screen Components: Top menu Toolbox Messages Progress Project Properties Top Menu File Top Menu
NX I-deas TMG Thermal Analysis
I-deas TMG Thermal Analysis Fast and accurate solutions to complex thermal problems Benefits Perform accurate thermal analysis quickly and efficiently Perform integrated thermal analysis as part of a collaborative
Interface Software Development for Patran/Thermal, Esarad and Thermica
Interface Software Development for Patran/Thermal, Esarad and Thermica 19th European Workshop an Thermal and ECLS Software Dr. Cosmas Heller EADS ASTIUM GmbH, Friedrichshafen - Germany All the space you
DIANA. Finite Element Analysis. Civil Engineering Geotechnical Engineering Petroleum Engineering
DIANA Finite Element Analysis Civil Engineering Geotechnical Engineering Petroleum Engineering NOW Advancing in new numerical analysis techniques Developing state-of-the-art solution for engineering applications
TRINITAS. a Finite Element stand-alone tool for Conceptual design, Optimization and General finite element analysis. Introductional Manual
TRINITAS a Finite Element stand-alone tool for Conceptual design, Optimization and General finite element analysis Introductional Manual Bo Torstenfelt Contents 1 Introduction 1 2 Starting the Program
Chapter 5 Modeling and Simulation of Mechanism
Chapter 5 Modeling and Simulation of Mechanism In the present study, KED analysis of four bar planar mechanism using MATLAB program and ANSYS software has been carried out. The analysis has also been carried
Appendix I. The KT Thermal Mapping Tool an semi-automated temperature transfer between structural and thermal models
119 Appendix I The KT Thermal Mapping Tool an semi-automated temperature transfer between structural and thermal models Anton Zhukov Markus Czupalla Alexander Kuisl Gerhard Bleicher Winfried Gambietz (Kayser-Threde
James Etchells (TEC-MCV) 19 th European Workshop on Thermal and ECLS Software 11 th 12 th October 2005
James Etchells (TE-MV) 19 th European Workshop on and ELS Software 11 th 12 th October 2005 1. Introduction and discussion of background and important issues 2. omparison of TLP and FEA for S/ thermal
TUTORIAL - COMMAND CENTER
FLOTHERM V3.1 Introductory Course TUTORIAL - COMMAND CENTER Introduction This tutorial covers the basic operation of the Command Center Application Window (CC) by walking the user through the main steps
Supersonic Flow Over a Wedge
SPC 407 Supersonic & Hypersonic Fluid Dynamics Ansys Fluent Tutorial 2 Supersonic Flow Over a Wedge Ahmed M Nagib Elmekawy, PhD, P.E. Problem Specification A uniform supersonic stream encounters a wedge
THE COMPARISON OF DIFFERENT THERMAL ANALYSIS SOFTWARE FOR THERMAL SIMULATION OF THE SPACE TELESCOPE
Remote Sensing Satellite Technology Workshop 216 Nov. 28, 216 THE COMPARISON OF DIFFERENT THERMAL ANALYSIS SOFTWARE FOR THERMAL SIMULATION OF THE SPACE TELESCOPE Cheng-En Ho, Meng-Hao Chen, Jeng-Der Huang,
Appendix C. Presentation of etherm 1.2. Thierry Basset Patrick Connil Jean-Paul Dudon (Thales Alenia Space, France) François Brunetti (Dorea, France)
41 Appendix C Presentation of etherm 1.2 Thierry Basset Patrick Connil Jean-Paul Dudon (Thales Alenia Space, France) François Brunetti (Dorea, France) 42 Presentation of etherm 1.2 Abstract In Thales Alenia
MRI Induced Heating of a Pacemaker. Peter Krenz, Application Engineer
MRI Induced Heating of a Pacemaker Peter Krenz, Application Engineer 1 Problem Statement Electric fields generated during MRI exposure are dissipated in tissue of the human body resulting in a temperature
Lecture 3 : General Preprocessing. Introduction to ANSYS Mechanical Release ANSYS, Inc. February 27, 2015
Lecture 3 : General Preprocessing 16.0 Release Introduction to ANSYS Mechanical 1 2015 ANSYS, Inc. February 27, 2015 Chapter Overview In this chapter we cover basic preprocessing operations that are common
Introduction to CFX. Workshop 2. Transonic Flow Over a NACA 0012 Airfoil. WS2-1. ANSYS, Inc. Proprietary 2009 ANSYS, Inc. All rights reserved.
Workshop 2 Transonic Flow Over a NACA 0012 Airfoil. Introduction to CFX WS2-1 Goals The purpose of this tutorial is to introduce the user to modelling flow in high speed external aerodynamic applications.
MODELLING-Representing space and time in a numerical model
MODELLING-Representing space and time in a numerical model Simulation parameters When setting up any simulation, whether computer-based or to be computed manually, it is important to identify the parameters
Basic Exercises Maxwell Link with ANSYS Mechanical. Link between ANSYS Maxwell 3D and ANSYS Mechanical
Link between ANSYS Maxwell 3D and ANSYS Mechanical This exercise describes how to set up a Maxwell 3D Eddy Current project and then link the losses to ANSYS Mechanical for a thermal calculation 3D Geometry:
Introduction to ANSYS DesignModeler
Lecture 5 Modeling 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Preprocessing Workflow Geometry Creation OR Geometry Import Geometry Operations Meshing
This is the script for the TEMP/W tutorial movie. Please follow along with the movie, TEMP/W Getting Started.
TEMP/W Tutorial This is the script for the TEMP/W tutorial movie. Please follow along with the movie, TEMP/W Getting Started. Introduction Here is a schematic diagram of the problem to be solved. An ice
Steady State Radiative Boundary Conditions
Exercise 22 Steady State Radiative Boundary Conditions Objectives: Create a 2D model that incorporates two enclosures. Define separate radiative boundary conditions for gray body and wave length dependent
Introduction to ANSYS LS-DYNA
Lecture 12 Introduction to ANSYS LS-DYNA Extension 14.5 Release Introduction to ANSYS LS-DYNA 2012 ANSYS, Inc. November 8, 2012 1 Release 14.5 What is ANSYS LS-DYNA Extension ANSYS LS-DYNA in Workbench
Appendix: To be performed during the lab session
Appendix: To be performed during the lab session Flow over a Cylinder Two Dimensional Case Using ANSYS Workbench Simple Mesh Latest revision: September 18, 2014 The primary objective of this Tutorial is
Appendix U. Development towards 3D thermography. Gianluca Casarosa (ESA/ESTEC, The Netherlands)
277 Appendix U Development towards 3D thermography Gianluca Casarosa (ESA/ESTEC, The Netherlands) 278 Development towards 3D thermography Abstract The presentation reports on an activity aimed at solving
Solid Conduction Tutorial
SECTION 1 1 SECTION 1 The following is a list of files that will be needed for this tutorial. They can be found in the Solid_Conduction folder. Exhaust-hanger.tdf Exhaust-hanger.ntl 1.0.1 Overview The
ANSYS AIM Tutorial Thermal Stresses in a Bar
ANSYS AIM Tutorial Thermal Stresses in a Bar Author(s): Sebastian Vecchi, ANSYS Created using ANSYS AIM 18.1 Problem Specification Pre-Analysis & Start Up Pre-Analysis Start-Up Geometry Draw Geometry Create
ANSYS Workbench Guide
ANSYS Workbench Guide Introduction This document serves as a step-by-step guide for conducting a Finite Element Analysis (FEA) using ANSYS Workbench. It will cover the use of the simulation package through
D&B Market Insight Release Notes. July 2016
D&B Market Insight Release Notes July 2016 Table of Contents User Experience and Performance 3 Mapping.. 4 Visualizations.... 5 User Experience and Performance Speed Improvements Improvements have been
Lionel Jacques. Luc Masset. (Space Structures and Systems Laboratory, University of Liège
285 Appendix U Finite element model reduction for the determination of accurate conductive links and application to MTG IRS BTA Lionel Jacques (Space Structures and Systems Laboratory, University of Liège
Lecture 2: Introduction
Lecture 2: Introduction v2015.0 Release ANSYS HFSS for Antenna Design 1 2015 ANSYS, Inc. Multiple Advanced Techniques Allow HFSS to Excel at a Wide Variety of Applications Platform Integration and RCS
What is STEP-TAS? What is TASverter? Understanding TASverter Additional Features of TASverter TASverter cases Current status How to get it?
Simon Appel and David Alsina (simon@thermal.esa.int) (alsina@thermal.esa.int) tasverter@thermal.esa.int ESA/ESTEC Thermal Analysis and Verification Section (D/TEC-MCV) 18th European Workshop on Thermal
Contents. 1 CoreTech System Co., Ltd.
Contents Advanced Support for Intelligent Workflow Improved User Interface 2 Expanded Gate Types.. 2 Enhanced Runner Wizard. 2 Customized Cooling Channel Templates. 3 Parameterized Mesh Generator... 3
Calculation Methods. IES Virtual Environment 6.4 CIBSE Heat Loss & Heat Gain (ApacheCalc)
Calculation Methods IES Virtual Environment 6.4 CIBSE Heat Loss & Heat Gain (ApacheCalc) Contents Calculation Methods...1 1 Introduction...3 2 Heat Loss...4 2.1 Heat Loss Methodology... 4 3 Heat Gain...5
Case Study 2: Piezoelectric Circular Plate
Case Study 2: Piezoelectric Circular Plate PROBLEM - 3D Circular Plate, kp Mode, PZT4, D=50mm x h=1mm GOAL Evaluate the operation of a piezoelectric circular plate having electrodes in the top and bottom
equivalent stress to the yield stess.
Example 10.2-1 [Ansys Workbench/Thermal Stress and User Defined Result] A 50m long deck sitting on superstructures that sit on top of substructures is modeled by a box shape of size 20 x 5 x 50 m 3. It
How TMG Uses Elements and Nodes
Simulation: TMG Thermal Analysis User's Guide How TMG Uses Elements and Nodes Defining Boundary Conditions on Elements You create a TMG thermal model in exactly the same way that you create any finite
New Technologies in CST STUDIO SUITE CST COMPUTER SIMULATION TECHNOLOGY
New Technologies in CST STUDIO SUITE 2016 Outline Design Tools & Modeling Antenna Magus Filter Designer 2D/3D Modeling 3D EM Solver Technology Cable / Circuit / PCB Systems Multiphysics CST Design Tools
Melting Using Element Death
Melting Using Element Death Introduction This tutorial was completed using ANSYS 7.0 The purpose of the tutorial is to outline the steps required to use element death to model melting of a material. Element
Transient Thermal Conduction Example
Transient Thermal Conduction Example Introduction This tutorial was created using ANSYS 7.0 to solve a simple transient conduction problem. Special thanks to Jesse Arnold for the analytical solution shown
SimLab Release Notes. 1 A l t a i r E n g i n e e r i n g
SimLab 11.0 Release Notes 1 A l t a i r E n g i n e e r i n g System Support extended to load and save GDA/SLB files of size greater than 4GB. Memory allocation is enhanced to support large models. Kubrix
For this week only, the TAs will be at the ACCEL facility, instead of their normal office hours.
BEE 3500 Homework Assignment 5 Notes: For this assignment, you will use the computational software COMSOL Multiphysics 5.3, available in Academic Computing Center Engineering Library (ACCEL) at the Carpenter
Creating T-Spline Forms
1 / 28 Goals 1. Create a T-Spline Primitive Form 2. Create a T-Spline Revolve Form 3. Create a T-Spline Sweep Form 4. Create a T-Spline Loft Form 2 / 28 Instructions Step 1: Go to the Sculpt workspace
Introduction to ANSYS Meshing. Workshop plan
Lecture 2 Introduction to ANSYS Meshing 2014 W2-1 Schedule WEiP Workshop plan Week 1 - Quick start in ANSYS Week 2 Geometry DesignModeler (DM) Week 3 Mesh Meshing Week 4 Solver FLUENT/CFX Week 5 - Post
Essay 5 Tutorial for a Three-Dimensional Heat Conduction Problem Using ANSYS
Essay 5 Tutorial for a Three-Dimensional Heat Conduction Problem Using ANSYS 5.1 Introduction The problem selected to illustrate the use of ANSYS software for a three-dimensional steadystate heat conduction
METHOD IMPROVEMENTS IN THERMAL ANALYSIS OF MACH 10 LEADING EDGES
METHOD IMPROVEMENTS IN THERMAL ANALYSIS OF MACH 10 LEADING EDGES Ruth M. Amundsen National Aeronautics and Space Administration Langley Research Center Hampton VA 23681-2199 ABSTRACT Several improvements
Tutorial: Package, analyze, and validate an OpticStudio sequential file in LensMechanix. By Esteban Carbajal, Senior Optomechanical Engineer
Tutorial: Package, analyze, and validate an OpticStudio sequential file in LensMechanix By Esteban Carbajal, Senior Optomechanical Engineer November 2017 www.zemax.com/lmx/ LMxSales@zemaxZemax.com LMxSupport@zemaxZemax.com
PRESETTER SP40. Pesaro, September 2013
Pesaro, September 2013 1 PRESETTER SP40 TECHNICAL SPECIFICATIONS: AXIS DIMENSIONS: Diameter 600mm, Height XXXX mm MAIN STRUCTURE: Entirely made in C45 medium carbon steel it ensures greater strength and
(Refer Slide Time 00:17) Welcome to the course on Digital Image Processing. (Refer Slide Time 00:22)
Digital Image Processing Prof. P. K. Biswas Department of Electronics and Electrical Communications Engineering Indian Institute of Technology, Kharagpur Module Number 01 Lecture Number 02 Application
Creo Simulate 3.0 Tutorial
Creo Simulate 3.0 Tutorial Structure and Thermal Roger Toogood, Ph.D., P. Eng. SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
ASME Fatigue DOCUMENTATION. ANSYS Mechanical Application. Extension version Compatible ANSYS version
ASME Fatigue ANSYS Mechanical Application DOCUMENTATION Extension version 180.1 Release date 06-Apr-17 Compatible ANSYS version 18.0 www.edrmedeso.com Table of Contents 1 INTRODUCTION... 3 2 PRODUCT RESTRICTIONS...
3. Preprocessing of ABAQUS/CAE
3.1 Create new model database 3. Preprocessing of ABAQUS/CAE A finite element analysis in ABAQUS/CAE starts from create new model database in the toolbar. Then save it with a name user defined. To build
Multi-Axis Tabular Loads in ANSYS Workbench
Multi-Axis Tabular Loads in ANSYS Workbench 2/24/2017 1 Users of ANSYS Workbench (18) may have noticed that the they have a choice of independent variables when defining a tabular load Typical choices
Heat Transfer Analysis of a Pipe
LESSON 25 Heat Transfer Analysis of a Pipe 3 Fluid 800 Ambient Temperture Temperture, C 800 500 2 Dia Fluid Ambient 10 20 30 40 Time, s Objectives: Transient Heat Transfer Analysis Model Convection, Conduction
Practice to Informatics for Energy and Environment
Practice to Informatics for Energy and Environment Part 3: Finite Elemente Method Example 1: 2-D Domain with Heat Conduction Tutorial by Cornell University https://confluence.cornell.edu/display/simulation/ansys+-+2d+steady+conduction
Engineering Analysis
Engineering Analysis with SOLIDWORKS Simulation 2018 Paul M. Kurowski SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
Introduction to ANSYS CFX
Workshop 03 Fluid flow around the NACA0012 Airfoil 16.0 Release Introduction to ANSYS CFX 2015 ANSYS, Inc. March 13, 2015 1 Release 16.0 Workshop Description: The flow simulated is an external aerodynamics
By Bonemap Extending Isadora s 3D Particles and 3D Model Particles
Extending Isadora s 3D Particles and 3D Model Particles By Bonemap 2018 Page 1 v.1 Extending Isadora s 3D Particles and 3D Model Particles with media instances By Bonemap 2018 One of the more difficult
SOLIDWORKS Flow Simulation Options
SOLIDWORKS Flow Simulation Options SOLIDWORKS Flow Simulation includes an options dialogue window that allows for defining default options to use for a new project. Some of the options included are unit
Femap Thermal & Flow V11
Femap Thermal & Flow V11 by Carl J. Poplawsky presented to Femap Symposium Ann Arbor, MI. date June 4th, 2015 MAYA Company Overview OEM Foundation Siemens PLM Partner 30+ years Software Developer Femap
0. Introduction: What is Computer Graphics? 1. Basics of scan conversion (line drawing) 2. Representing 2D curves
CSC 418/2504: Computer Graphics Course web site (includes course information sheet): http://www.dgp.toronto.edu/~elf Instructor: Eugene Fiume Office: BA 5266 Phone: 416 978 5472 (not a reliable way) Email:
Data analysis with ParaView CSMP Workshop 2009 Gillian Gruen
Data analysis with ParaView 3.4.0 CSMP Workshop 2009 Gillian Gruen How to...... display a data set ( Contour, Glyph, Clip, Slice) be efficient in displaying similar data sets ( work with Lookmarks )...
PARALLEL ENGINEERING SIMULATIONS BASED ON FORMING SIMULATION OF A HEAT EXCHANGER PLATE
PARALLEL ENGINEERING SIMULATIONS BASED ON FORMING SIMULATION OF A HEAT EXCHANGER PLATE Gabrielson P.*, Thuvesen D.** * Alfa Laval Lund AB Box 74, S-221 00 LUND, Sweden & Div. of Production and Materials
3.2 A Three-Bar Linkage 51
3.2 A Three-Bar Linkage 51 It may happen that the drawing in Euclidean view is too big or too small. You can use the zooming tools to change this. There is a Zoom-In and a Zoom-Out tool below the Euclidean
Finite Element Course ANSYS Mechanical Tutorial Tutorial 3 Cantilever Beam
Problem Specification Finite Element Course ANSYS Mechanical Tutorial Tutorial 3 Cantilever Beam Consider the beam in the figure below. It is clamped on the left side and has a point force of 8kN acting
First Steps - Ball Valve Design
COSMOSFloWorks 2004 Tutorial 1 First Steps - Ball Valve Design This First Steps tutorial covers the flow of water through a ball valve assembly before and after some design changes. The objective is to
Lateral Loading of Suction Pile in 3D
Lateral Loading of Suction Pile in 3D Buoy Chain Sea Bed Suction Pile Integrated Solver Optimized for the next generation 64-bit platform Finite Element Solutions for Geotechnical Engineering 00 Overview
Surface Transforms: For Large Patterns
Surface Transforms: For Large Patterns Table of Contents: 1) Objective 2) Overview 3) Metric 4) Tutorial 5) Key Vocabulary 6) Tutorial Evaluation Page 1 of 9 Objective: At the end of this tutorial, you
Gaetan Usage at Alcatel Space
Alcatel Space K. Caire What is the goal of this presentation? --> an exhaustive view of GAETAN --> a synthetic view of the advantages of a pre/post-processing tool --> a training session on the software
pre- & post-processing f o r p o w e r t r a i n
pre- & post-processing f o r p o w e r t r a i n www.beta-cae.com With its complete solutions for meshing, assembly, contacts definition and boundary conditions setup, ANSA becomes the most efficient and
3D Anatomy for Resistance Training: new user-interface
3D Anatomy for Resistance Training: new user-interface A brief guide to help orientate you to our new interface. BROWSING Whilst the core functionality of the products remains the same, all the browsing
SIMULATION CAPABILITIES IN CREO
SIMULATION CAPABILITIES IN CREO Enhance Your Product Design with Simulation & Using digital prototypes to understand how your designs perform in real-world conditions is vital to your product development
3 AXIS STANDARD CAD. BobCAD-CAM Version 28 Training Workbook 3 Axis Standard CAD
3 AXIS STANDARD CAD This tutorial explains how to create the CAD model for the Mill 3 Axis Standard demonstration file. The design process includes using the Shape Library and other wireframe functions
MASTA 9.0 Release Notes
November 2018 2018 Smart Manufacturing Technology Ltd. Commercial in Confidence Page 1 of 33 MASTA 9.0 Contents and Summary See next section for additional details The 9.0 release of MASTA contains all
2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary
Bi-directional Automatic Electromagnetic-Thermal Coupling for HEV/EV Traction Motor Design Using Maxwell and ANSYS Mechanical Peng Yuan Eric Lin Zed (Zhangjun) Tang ANSYS, Inc. 2010 ANSYS, Inc. All rights
Designing Horn Antenna utilizing FEM Symmetry Boundary Conditions
Designing Horn Antenna utilizing FEM Symmetry Boundary Conditions If a structure has any symmetry (E or M i.e. Electric or Magnetic), the structure s physical size can be reduced symmetric plane boundary
STEP-TAS TAS Activities
18 th Workshop on ECLSS & Thermal Software ESTEC, 05-06/10/2004 STEP-TAS TAS Activities Christian CAILLET - Thierry BASSET c-caillet@opencascade.com thierry.basset@space.alcatel.fr October 2004 w w w.
INSTED /CFD Post-Processor. Post-Processor. Chapter 5 INSTED /CFD (2D) Post-Processor
INSTED /CFD Chapter 5 INSTED /CFD (2D) The part of INSTED/CFD (2D) plots lines or filled contours of variables such as velocities, temperature, pressure, scalars, and stream function. The program also
Appendix E. Development of methodologies for Brightness Temperature evaluation for the MetOp-SG MWI radiometer. Alberto Franzoso (CGS, Italy)
111 Appendix E Development of methodologies for Brightness Temperature evaluation for the MetOp-SG MWI radiometer Alberto Franzoso (CGS, Italy) Sylvain Vey (ESA/ESTEC, The Netherlands) 29 th European Space
Wall thickness= Inlet: Prescribed mass flux. All lengths in meters kg/m, E Pa, 0.3,
Problem description Problem 30: Analysis of fluid-structure interaction within a pipe constriction It is desired to analyze the flow and structural response within the following pipe constriction: 1 1
International Conference on Space Optics ICSO 2008 Toulouse, France October 2008
ICSO 008 14 17 October 008 Edited by Josiane Costeraste, Errico Armandillo, and Nikos Karafolas Coupled thermo-elastic and optical performance analyses of a reflective baffle for the BepiColombo laser
IESVE Revit Plug-in User Guide <VE> 6.1
User Guide 6.1 INTEGRATED ENVIRONMENTAL SOLUTIONS LIMITED Developers of the IES BOSTON, MA GLASGOW, SCOTLAND DUBLIN, IRELAND LONDON, ENGLAND MELBOURNE, AUSTRALIA SAN FRANCISCO,
Free Convection Cookbook for StarCCM+
ME 448/548 February 28, 2012 Free Convection Cookbook for StarCCM+ Gerald Recktenwald gerry@me.pdx.edu 1 Overview Figure 1 depicts a two-dimensional fluid domain bounded by a cylinder of diameter D. Inside
General Information Project management Introduction... 4 Getting Started Input geometry... 7
Tutorial Shell Tutorial Shell All information in this document is subject to modification without prior notice. No part or this manual may be reproduced, stored in a database or retrieval system or published,
2: Static analysis of a plate
2: Static analysis of a plate Topics covered Project description Using SolidWorks Simulation interface Linear static analysis with solid elements Finding reaction forces Controlling discretization errors
Speed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester
Speed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Content ANSYS CFD Introduction ANSYS, the company Simulation
A multidiscipline solution to support space systems engineering
Overview 06 February 2014 A multidiscipline solution to support space systems engineering Offering a wide scope of applications and ensuring the sharing of data and models along the design Overview System
SOLAR GEOMETRY (AND RADIATION)
SOLAR GEOMETRY (AND RADIATION) Ball State Architecture ENVIRONMENTAL SYSTEMS 1 Summer 2011 Grondzik 1 Solar Radiation Components glass will reflect some incoming radiation; absorb some; and transmit some
Simulation of Turbulent Flow around an Airfoil
Simulation of Turbulent Flow around an Airfoil ENGR:2510 Mechanics of Fluids and Transfer Processes CFD Pre-Lab 2 (ANSYS 17.1; Last Updated: Nov. 7, 2016) By Timur Dogan, Michael Conger, Andrew Opyd, Dong-Hwan