AUTOCAD CIVIL 3D 2008 NEW ZEALAND COUNTRY KIT

Transcription

1 AUTOCAD CIVIL 3D 2008 NEW ZEALAND COUNTRY KIT

2 1 TABLE OF CONTENTS 2 Purpose of this document: Drafting and Plans Production Settings Sheet Creation Drafting and Labeling Settings Reports General Enhancements and Maintenance OBJECT LAYERS, OBJECT COMPONENT DISPLAY LAYERS, COLOURS, LINETYPES AND LAYER MANAGER GENERAL POINTS SURFACES PARCEL GRADING ALIGNMENT PROFILE PROFILE VIEW SAMPLE LINES SECTIONS SECTION VIEWS Pipe Rules PIPE NETWORK PIPE STRUCTURE Corridor Design Standards CORRIDOR ASSEMBLY SUBASSEMBLY

3 25 QUANTITY TAKEOFF Quantities Report Style Sheets SURVEY VIEW FRAME GROUP VIEW FRAME MATCH LINE

4 2 PURPOSE OF THIS DOCUMENT: This document defines the content to be delivered as part of the Civil 3D 2008 Country Kit. Revision Status Work In Progress Under Review Approval Status Not Approved Approved Update In Progress Accepted 4

5 3 DRAFTING AND PLANS PRODUCTION SETTINGS Update or create settings, object styles, and labeling utilizing the new features and functionality added in Civil 3D 2008 listed below. Wherever possible, API-based Custom Draw drafting functionality in the 2007 Country Kit will be replaced with new Sheet Creation, Drafting, and Labeling template settings and styles. 3.1 SHEET CREATION Create templates to define border, frame, title block, North Arrow and other general sheet settings and styles for plan and profile sheets Enhance templates with settings that define the appearance and annotation of sheet match lines 3.2 DRAFTING AND LABELING Enhance templates with settings and styles that define the appearance and annotation of cross section sheets Enhance templates to add appropriate styles for Contour Labels Enhance templates to add appropriate styles and settings for annotation of axis margins, and for title box band labels for Profiles and Cross Sections Enhance templates to add appropriate Annotation variables. For example, add variables to labels to control size and rotation of label elements. 3.3 SETTINGS Enhance templates to include layer settings for the new layers added to Civil 3D 2008 Enhance templates to include command settings for new Plans Production commands added in Civil 3D REPORTS Report_AlignStaInc.dvb Report_Utilities.dvb Report_AlignPISta.dvb Report_AlignStakeout.dvb Report_ProfileStaInc.dvb Report_ParcelVol.dvb Report_ProfilePVCurve.dvb Report_PointsStaOffset.dvb Report_CorridorSlopeStake.dvb Report_ParcelMapCheck.dvb Report_ProfilePVICurve.dvb Report_HEC-RAS.dvb Update all report macros in the 2007 Country Kit written in VBA code to operate correctly with Civil 3D 2008 Modify alignment and profile reports in the 2007 Country Kit to support siteless alignments 5

6 4 GENERAL ENHANCEMENTS AND MAINTENANCE Update all templates in the 2007 Country Kit so that proxy graphics are not saved Provide the subassembly codes file in Unicode format Update any feature extensions in the 2007 Country Kit that use VBA code (exluding subassemblies) to operate correctly in Civil 3D Specifically update the references to the 2008 Type Libraries, and modify to support siteless alignments if appropriate. 6

7 5 OBJECT LAYERS, OBJECT COMPONENT DISPLAY LAYERS, COLOURS, LINETYPES AND LAYER MANAGER This kit implements basic Object Layers configuration where Layer Name Suffix is used for Surface Object only. The aim is to introduce this feature to the users. Other objects, such as Alignments and Alignment related objects and collections, can be configured to use Layer name Modifiers. In Addition, Object Component Display is configured to use Component specific Layers. Object Component Display Properties are set to use either ByLayer or ByBlock for Colour and Linetype settings. This method is selected to allow control of Object Components Visibility when Civil 3D 7

8 drawings are opened in AutoCAD with Object Enabler. Users can control the visibility of Object Display Components using Layers visibility. To support this method and facilitate easier control over Components visibility, the supplied drawing Template includes a set of Layer Property Filters that use Layer Names to group layers: Colour scheme for the supplied templatewas designed to provide equal visibility of components on either white or black background in AutoCAD Dsiplay Options 8

9 6 GENERAL Multipurpose For Element Style Name Style Name Description Marker Type Marker Symbol Name Survey UnKnown Point 2 AeccTickTriangle Daylight - SubGrade 0 Bench Point 0 Flange Flange Point Marker. 0 SubLayer 0 Ditch Extents 0 Basic Triangle 2 AeccTickTriangle Crown 0 Basic 0 Marked Point 2 AeccTickTriangle Survey Known Point 2 AeccTickTriangle Edge of Travel Way 0 Basic Square 1 Survey Sideshot 1 Curb 0 Basic Circle with Cross 1 Uncoded 0 _No Markers 1 Sidewalk 0 Alignment Geometry 0 PI Point 2 AeccTickTriangle Ditch Bottom 0 Slope Stake - Cut 0 Daylight 0 9

10 Standard 0 Edge of Paved Shoulder 0 Edge of Unpaved Shoulder 0 Gutter Gutter Point Marker. 0 Hinge 0 Slope Stake - Fill 0 Lane Break 0 _NZ IP Point 2 AeccTickTriangle Feature Lines Slope Patterns Code Sets Links Shapes Label Note _NZ General purpose Line Curve Marker Link Shape 10

11 7 POINTS Point Name Description Style Name Description Marker Symbol Name Marker Size 2D Layer Marker 2D Layer Label PTRE-3D Tree Utility Pole Style for utility pole. Utility Pole POLE POLE ICB AI_VASIS SV ws_stopv PTEM te_mh PP EL_POLE Basic V-NODE TEXT WM ws_meter Horizontal Curve Point Style for horizontal curve point. Station Mark V-CTRL- HCPT V-CTRL- HCPT Guy Pole Style for guy pole. Guy Pole POLE POLE PSIL PSIL Water Shutoff Style for water shutoff. Water Shutoff WATR WATR PUNB PUNB PUNP PUNP SIGN tr_sign STAR PICKET su_bm Bound Style for bound. bound BNDY BNDY STA STA V-CTRL- HCPT V-CTRL- HCPT PPT Transformer PWML Sanitary Sewer Manhole Style for sanitary Sewer Manhole SSWR SSWR 11

12 sewer manhole. COCO Tree Catch Basin Style for catch basin. Catch Basin STRM STRM Sign (single pole) Style for single pole sign. Single Pole Sign SIGN SIGN Iron Pin Style for iron pin. Iron Pin BNDY BNDY TPIT te_pit Storm Sewer Manhole Style for storm sewer manhole. Drainage MH STRM STRM TR Tree Benchmark Style for benchmark. Benchmark V-CTRL- BMRK V-CTRL- BMRK STATION su_stn BOLLARD MS_BOLRD Gas Valve Style for gas valve. Gas Valve NGAS NGAS Vertical Curve Point Style for vertical curve point. Station Mark V-CTRL- VCPT V-CTRL- VCPT Level Dot Hydrant (existing) Style for existing fire hydrant Existing Hyd WATR WATR DRG - Drain Grate DR_GRATE BIN MH Copy of New Point Style Style for tree Tree 6 20 TREE TREE Shrub - 5ft Style for shrub - 5'. Shrub 2 5 TREE TREE ELP el_lghtp PELB-Elec Pit PELB

13 Hydrant (proposed) Style for proposed fire hydrant. Proposed Hyd WATR WATR Drill Hole Style for drill hole. Drill Hole BNDY BNDY Standard Well Style for fire hydrant well. Well WATR WATR PPL El Pole Point el_lghtp Water Valve Style for water valve. Water Valve WATR WATR PAYBOX ST_MS FH WS_FH SMH SW_MH SWMH SEW-MH PSLP el_lghtp Test Pit Style for test pit. Test Pit WATR WATR PSM su_psm Point Table _NZ Point Coordinates Style Style Name Description Point Label _NZ No Labels Point Label _NZ Code only Point Label Land Desktop Point Style Point Style with the same appearance Land Desktop displayed Points Point Label _NZ Level and Code Point Label _NZ Raw Code only 13

14 Point Point Point Point Label Label Label Label _NZ Pt Number only _NZ CivCad _NZ Level and Raw Code _NZ Levels only Point Label Standard Standard Style Point Point Label Label _NZ PT Number Level Code _NZ PT Number Level Code (Raw) Description key Sets _NZ Numeric _NZ Alpha 14

15 8 SURFACES Surface Style Name Description _NZ 2D Borders _NZ Aspect Map Shows surface border as a 2D TIN triangles shaded based on the triangle aspect - North Azimuth orientation of the slope _NZ Contours - Background 1m _NZ Contours - Design - 0.1m _NZ Contours - Design - 1m _NZ Contours - NS - 0.2m _NZ Contours - NS - 0.5m _NZ Contours - NS - 1m _NZ Contours - NS - 2m _NZ Contours - NS - 5m _NZ Contours & Triangles - 0.2m _NZ Levels Shading 3D faces of the surface model, colour coded based on level range _NZ No Display _NZ Slope Arrows & Triangles _NZ Slope Arrows & Watersheds _NZ Slopes _NZ Triangles - Design _NZ Triangles - NS _NZ Triangles & Points Direction Table Style Slope Table Style _NZ aspect _NZ Cut and Fill Depths _NZ Levels Slope Arrow Table Style Contour Table Style _NZ Slope Arrows _NZ Contours 15

16 WaterShed Table Style _NZ Watersheds Watershed Label Style _NZ Watershed details Watershed areas based on surface TIN. Spot Elevation Label Style _NZ Spot Levels _NZ Spot Levels - Angled Surface spot level Label Style Surface spot level Label Style Slope Label Style _NZ Grade Label Grade label showing percent character _NZ Slope Label Showing rise : run as 1:2 Contour Label Style _NZ Dsgn Major Design Surface Major Contour Label Style _NZ Dsgn Minor _NZ NS Minor Design Surface Minor Contour Label Style Natural Surface Minor Contour Label Style _NZ User Contour _NZ NS Major Natural Surface Major Contour Label Style 16

17 9 PARCEL Parcel Style Name Description Parcel Segment Table POS ROAD RES L _NZ Lot lines Public Open Space Road Reserve lot New Zealand Lot Bearing and Length or Chord Bearing and Radius Parcel Area Table _NZ Lot Areas Lot # and Size Parcel Line Table _NZ Bearings and Lengths Parcel Curve Table Syles _NZ Arcs R & A & C & Ch details Curve Segment Label _NZ Span Arc 10sec 10mm _NZ Span Arc 1min 10mm _NZ Arc 10sec 100mm _NZ Span Arc 20sec 10mm _NZ Arc 10sec 1m _NZ Arc 20sec 10mm _NZ Arc 1min 10mm _NZ Span Arc 10sec 1m _NZ Span Arc 5sec 10mm _NZ Span Arc 10sec 100mm _NZ Arc 5sec 10mm _NZ Arc 10sec 10mm Parcel Area _NZ Site Block of Land - Overall _NZ No L 999 L 999 Parcel Line Label _NZ No & Area _NZ Brg Dist 1min 10mm 500m2 Bearing to the nearest minute and Distance to the nearest 10mm. For lines shorter than or equal to 30m. 17

18 _NZ Brg 1min _NZ Span Brg Dist 5sec _NZ Brg Dist 10sec 10mm _NZ Span BD 20sec 10mm _NZ Bearing 20sec _NZ Span BD 10sec 1m _NZ BD 20sec 10mm _NZ Span Brg Dist 10sec 10mm _NZ Span Brg 10sec _NZ Brg Dist 5sec 10mm _NZ BD 1min 10mm _NZ Bearing 10sec _NZ Span BD 1min 10mm Bearing to the nearest minute. For lines shorter than or equal to 30m. Spanning accross multiple line segments, Bearing is rounded to the nearest 5 seconds, Distance is rounded to the nearest 1cm for Queensland rounding Standards Bearing to the nearest 10sec and Distance to the nearest 10mm. For lines longer than 30m but shorter or equal to 200m. Span Bearing above Distance for distance longer than 30m and shorter or equal to 200m Bearing to the nearest 20sec Span Bearing above Distance for distances longer than 5000m Bearing to the nearest 20sec, above Distance to the nearest 10mm. For lines longer than 30m and shorter than or equal to 200m Span Bearing and Distance on line. For lines longer than 200m but shorter than 500m Span the commomn Bearing value over multiple lot segments Bearing rounded to the nearest 5 seconds, Distance rounded to the nearest 10mm for Queensland rounding Standards Bearing to the nearest minute, above Distance to the nearest 10mm. For lines shorter than or equal to 30m Bearing to the nearest 10sec Span Bearing above Distance for distances shorter or equal to 30m 18

19 _NZ Span Distance Special Integer _NZ Span Distance 10mm _NZ Span Brg Dist 1min 10mm _NZ Span Brg 1min _NZ Span Distance 100mm _NZ Span Brg Dist 10sec 100mm _NZ Span BD 10sec 10mm _NZ BD 10sec 10mm _NZ Distance Special Integer _NZ Span Brg Dist 10sec 1m _NZ Bearing 1minute _NZ Span BD 10sec 100mm _NZ Span Distance 1m Rounded to the nearest whole meter to support writing off trailing zeroes with "m" suffix to delineate 6 from 9, 18 from 81, 89 from 68 etc. Distance rounded to the nearest 1cm spanning accross multiple lots Span Bearing and Distance on line. For lines shorther than 30m Span the commomn Bearing value over multiple lot segments Distance rounded to the nearest 100mm spanning accross multiple lots Span Bearing and Distance on line. For lines longer than 500m but shorter than 5000m Span Bearing above Distance for distance longer than 200m but shorter than or equal to 500m Bearing to the nearest 10sec, above Distance to the nearest 10mm for lines longer than 200m but shorter or equal to 500m Rounded to the nearest whole meter to support writing off trailing zeroes with "m" suffix to delineate 6 from 9, 18 from 81, 89 from 68 etc. Span Bearing and Distance on line. For lines longer than 5000m Bearing to the nearest 1minute Span Bearing above Distance for distance longer than 500m but shorter than or equal to 5000m Distance rounded to the nearest 1m spanning accross multiple 19

20 lots _NZ Bearing 5sec _NZ Span Distance Integer _NZ Distance 10mm _NZ Brg Dist 10sec 1m _NZ Brg 10sec _NZ Dist 1m _NZ Distance 1m _NZ Distance 100mm _NZ Brg Dist 20sec 10mm _NZ Brg 20sec _NZ BD 10sec 100mm _NZ Distance Integer _NZ Span Brg Dist 20sec 10mm Bearing to the nearest 5sec Rounded to the nearest whole meter to support writing off trailing zeroes for round distances *.00 Distance rounded to the nearest 1cm spanning accross multiple lots Bearing to the nearest 10sec and Distance to the nearest 1m. For lines longer than 5000m. Bearing to the nearest 10sec. For lines longer than 5000m. Distance to the nearest 1m. For lines longer than 5000m. Distance rounded to the nearest 1m Distance rounded to the nearest 100mm spanning accross multiple lots Bearing to the nearest 20sec and Distance to the nearest 10mm. For lines longer than 30m but shorter or equal to 200m. Bearing to the nearest 20sec. For lines longer than 30m but shorter or equal to 200m. Bearing to the nearest 10sec, above Distance to the nearest 100mm. For lines longer than 500m but shorter or equal to 5000m Rounded to the nearest whole meter to support writing off trailing zeroes for round distances *.00 Span Bearing and Distance on line. For lines longer than 30m but shorter than 200m 20

21 _NZ Span Brg 20sec _NZ BD 5sec 10mm _NZ Span BD 5sec 10mm _NZ Span B 5sec Span the commomn Bearing value over multiple lot segments Bearing rounded to the nearest 5 seconds above Distance rounded to the nearest 10mm for Queensland rounding Standards Bearing rounded to the nearest 5 seconds above Distance rounded to the nearest 1cm for Queensland rounding Standards - spanning accross multiple lots Bearing rounded to the nearest 5 seconds for Queensland rounding Standards - spanning accross multiple lots _NZ Span D 10mm _NZ Brg Dist 10sec 100mm _NZ BD 10sec 1m Bearing to the nearest 10sec and distance to the nearest 100mm. For lines longer than 500m but shorter or equal to 5000m). Bearing to the nearest 10sec, above Distance to the nearest metre. For lines longer than 5000m 21

22 10 GRADING Grading Criteria Sets Name Description _NZ General purpose Grading _NZ Cut Slope Tadpoles _NZ Generic Generic purpose Grading style _NZ Cut Slope Lines _NZ Fill Slope Tadpoles 22

23 11 ALIGNMENT Alignment Name _NZ Centreline _NZ Strings _NZ Design Description General centreline design style General strings design style General centreline design style Label Sets Name Label Name _NZ All Labels Major Station _NZ Perpendicular Tick Minor Station Geometry Point Design Speed _NZ Tick Only _NZ GP Data _NZ Speed Chainage _NZ No Labels _NZ Geometry Tick Geometry Point _NZ Tick Only _NZ Major Minor and Geometry _NZ Major Parallel and Geometry Tick _NZ Major and Geometry Major Station Minor Station Geometry Point Major Station Geometry Point Major Station Geometry Point _NZ Perpendicular Tick _NZ Tick Only _NZ GP Data _NZ Parallel Tick _NZ Tick Only _NZ Perpendicular Tick _NZ GP Data _NZ Major and Minor Major Station _NZ Perpendicular Tick Minor Station _NZ Tick Only _NZ Highway Labels Major Station _NZ Perpendicular Tick Minor Station Geometry Point Design Speed _NZ Tick Only _NZ GP Data _NZ Speed Chainage Table Name Description 23

24 Segment Spiral Table Table _NZ Line Arc Spiral Lengths _NZ Chainage Easting Northing Radii Bearing IP _NZ Ch East North Bear Rad Tang Ang Length _NZ Spirals Line Table _NZ Lines Curve Table _NZ Arcs Tangent Intersection Name _NZ IP Details Description Detailed design layout and setout data for the curve arc segment displayed above the tangent IP. Design Speed Name Description _NZ Speed Chainage Design Speed above Chainage Station Equation Name Description _NZ Chainage Change To label a point on alignment where chainage values have to continue from a different base. Eg. chainage becomes chainage 0.00 and all chainages ahead continue to grow from chainage value 0.00 Station Offset Name Description _NZ Right side Ch & Offset Line _NZ Ch & Offset Table _NZ Left side Ch & Offset Line Spiral Name Description 24

25 _NZ Design Data Detailed spiral data. Label mode is on. _NZ Name Only Curve Name Description _NZ Name only _NZ Design Data Line Name Description _NZ Name only _NZ Design Data Geometry Point Name Description _NZ Tick Only Creates a circular tick only. _NZ Circle Tick Only Creates a circular tick only. _NZ Line Tick Only Creates a Line tick only. _NZ GP Data Creates a cicular tick with a perpendicular line. The geometry point data is placed along the line. _NZ Quarter Points Creates a Line tick only. Minor Station Name Description _NZ Tick Only Major Station Name Description ARD-AlignmentLabelStyle General Advanced Road Design chainage display style _NZ Perpendicular Tick _NZ Parallel Tick 25

26 12 PROFILE Station Elevation Label Tangent Label Grade Break Label Major Station Label Minor Station Label Profile View Style Name _NZ VC Min _NZ VC End _NZ VC IP _NZ VC Max _NZ Crest Curve _NZ VC _NZ VC Start _NZ Vertical Curve _NZ Sag Curve _NZ Design Tangent Slope _NZ Design Tangent Grade _NZ Vertical with line Perpendicular with Tick Perpendicular with Tick _NZ Design Surface _NZ Existing Surface Two _NZ Existing Surface Description Horizontal Point Label Geometry _NZ Horiz Align TP Label Set Style Name Description Style Name _NZ No Labels _NZ Existing Surface Geometry Point _NZ Horiz Align TP _NZ Design Basic Set Grade Break _NZ Vertical with line Line Sag Curve Crest Curve _NZ Design Tangent Grade _NZ Sag Curve _NZ Crest Curve 26

27 _NZ Design VC Vertical Curves label style Label Line Sag Curve Crest Curve Style Name _NZ Design Tangent Grade _NZ Vertical Curve _NZ Vertical Curve _NZ VC Details Line _NZ Design Tangent Grade Sag Curve Sag Curve Sag Curve Sag Curve Sag Curve Sag Curve Crest Curve Crest Curve Crest Curve Crest Curve Crest Curve Crest Curve _NZ VC _NZ VC End _NZ VC IP _NZ VC Max _NZ VC Min _NZ VC Start _NZ VC _NZ VC End _NZ VC IP _NZ VC Max _NZ VC Min _NZ VC Start 27

28 13 PROFILE VIEW Profile View Name Description _NZ Highway Design no Title _NZ Road Presentation 5x 5 times vertically exaggerated _NZ Pipes _NZ Pipes no Title _NZ Road Presentation 20x no Title 20 times vertically exaggerated _NZ Road Design _NZ Road Presentation 10x no Title _NZ Road Presentation 10x _NZ Road Presentation 5x no Title _NZ Road Presentation 20x 10 times vertically exaggerated 10 times vertically exaggerated 5 times vertically exaggerated 20 times vertically exaggerated Station Elevation Label _NZ Road Design no Title _NZ Highway Design Name Description _NZ Chainage & Level Label For Long section details Depth Label _NZ Slope Rise over Run _NZ Depth Label _NZ Grade percents Band Sets Name Description Style Name _NZ Pipes With Depths to Invert no Title _NZ Highway Design no Title Vert Geo Horz Geo Profile Data _NZ Vertical Geometry no Title _NZ Single Carriageway no Title _NZ Depths P2 - P1 no Title 28

29 Profile Data Profile Data Profile Data _NZ Design Levels P2 no Title _NZ Existing Levels P1 no Title _NZ Chainage no Title _NZ Surface Levels Only Profile Data _NZ Existing Levels P1 Profile Data _NZ Chainage _NZ Pipes _NZ Simple Design Profile Data _NZ Design Levels P2 Profile Data Profile Data _NZ Existing Levels P1 _NZ Chainage _NZ Pipes no Title _NZ Road Design Vert Geo _NZ Vertical Geometry Horz Geo Profile Data Profile Data Profile Data Profile Data _NZ Single Carriageway _NZ Depths P2 - P1 _NZ Design Levels P2 _NZ Existing Levels P1 _NZ Chainage _NZ Road Design no Title Vert Geo _NZ Vertical Geometry no Title Horz Geo Profile Data Profile Data Profile Data Profile Data _NZ Single Carriageway no Title _NZ Depths P2 - P1 no Title _NZ Design Levels P2 no Title _NZ Existing Levels P1 no Title _NZ Chainage no Title _NZ Pipes With Depths to Invert _NZ Highway Design Vert Geo _NZ Vertical Geometry Horz Geo Profile Data Profile Data Profile Data _NZ Single Carriageway _NZ Depths P2 - P1 _NZ Design Levels P2 _NZ Existing Levels P1 29

30 Profile Data _NZ Chainage Bands - Profile Data _NZ Building Line Levels Right _NZ Chainage _NZ Depth to Invert P2 - P1 To be used with pipes band set. Create pipe profile view and digitise pipe invert line as profile layout then assign it as "profile1" in the profile view properties bands to display depth _NZ Chainage no Title _NZ Design Levels Left Kerb _NZ Depths P2 - P1 _NZ Depths P2 - P1 no Title _NZ Depth to Invert P2 - P1 no Title To be used with pipes band set. Create pipe profile view and digitise pipe invert line as profile layout then assign it as "profile1" in the profile view properties bands to display depth _NZ Building Line Levels Left _NZ Design Levels Right Kerb _NZ Design Levels P2 _NZ Existing Levels P1 _NZ Design Levels P2 no Title _NZ Existing Levels P1 no Title Bands - Vertical Geometry _NZ Vertical Geometry _NZ Vertical Geometry no Title Bands - Horizontal Geometry _NZ Single Carriageway _NZ Single Carriageway no Title Bands Superelevation _NZ Superelevation Data 30

31 Data _NZ Superelevation Data no Title Bands Sectional Dat _NZ Section Line Data Bands Network Pipe _NZ Section Line Data no Title _NZ Ground Levels _NZ Ground Levels no Title _NZ Invert Levels _NZ Invert Levels no Title _NZ Pipe Data _NZ Pipe Data no Title _NZ Pit Chainage _NZ Pit Chainage no Title _NZ Rim Levels _NZ Rim Levels no Title _NZ Sump Depth _NZ Sump Depth no Title _NZ Trench Type _NZ Trench Type no Title 31

32 14 SAMPLE LINES Sample Line Name Description _NZ Road Sections Sample Lines Metric, for use with roads. Sample Line Label _NZ Chainage only 32

33 15 SECTIONS Section Name Description _NZ Existing Ground _NZ Design Datum _NZ Design Ground Label Sets _NZ No Labels Used for Corridor Design Surface Sections in Section Views. No labeling of section segments in section view is implemented with this set of styles. The selected points offset/level and segment grade labels are defined by the subassembly code set's label styles _NZ Grade Break Points _NZ Existing Section Data Add labels to this Style to suit the Natural Surface section labeling _NZ Crossgrades Major Offset Label _NZ Level Minor Offset Label _NZ Offset Offset Grade Break Label Segment Label _NZ Section Points Design data _NZ Section Grades 33

34 16 SECTION VIEWS Section View Name Description _NZ QLD Rural Roads Where the DATUM, Parent Alignment and Chainage are shown similar to the Profile View Style. This is a recommended style for better stacking of section views on the page. _NZ Road Section _NZ Full Section Group Plot _NZ Plot by Page 500 Basic _NZ Plot All Sections Plot All Sections for the sample line group _NZ Plot by Page _NZ Plot by Page 100 _NZ Plot by Page 200 Sheet _NZ A1 500 Basic1 _NZ A1 (Landscape) A1 Sheet layout in Landscape _NZ A1 200 Compact _NZ A1 _NZ A1 100 _NZ A1 200 _NZ Compact Section Where the DATUM, Parent Alignment and Chainage are shown similar to the Profile View Style. This is a recommended style for better stacking of section views on the page. Offset Elevation Label Grade Label _NZ Offset and Level _NZ Section View Depth Grade 34

35 Band Sets _NZ Section QLD Rural Section only without Band Data. To be used with Corridor Point Code Labels only.use with the Compact Section View Style. Alignment Name, Chainage and Datum included _NZ Segment Widths and Grades _NZ Section Standard Cross section segments labelled with widths and grades in two bands. Design Levels, Existing Levels and Offsets _NZ Section Full Set _NZ Sections Segment Data Cross section segments labelled with widths and grades in two bands. Band - Section Data _NZ QLD Rural Roads Levels _NZ Offsets _NZ Design Levels _NZ Existing Levels _NZ Datum Levels Standard cross sections offsets Corridor Top Surface Levels Existing Surface Corridor Datum surface levels Band - Section Segment _NZ Segment Grades _NZ Segment Offsets _NZ Segment Widths Standard cross sections offsets Corridor Top Surface Levels Table Total Volume _NZ Segment Grades _NZ Segment Offsets _NZ Segment Widths Standard cross sections offsets Corridor Top Surface Levels Table Material _NZ Segment Grades _NZ Segment Offsets _NZ Segment Widths Standard cross sections offsets Corridor Top Surface Levels 35

36 17 PIPE RULES Pipe Rules Name Description _NZ General purpose Localized C3DNetworkRules.dvb 36

37 18 PIPE NETWORK Parts Lists Name Description _NZ Drainage Interference Name Description _NZ Servicelines Interference Commands Settings Name Description 37

38 19 PIPE Pipe Name Description _NZ Crossing Drainage Pipe _NZ Drainage Pipe _NZ Single Line Drainage Pipe Pipe Rule Set _NZ Drainage Pits _NZ Sewer Pits Label Plan Profile _NZ Drainage Pipe Data _NZ Drainage Pipe Name Label Section Crossing _NZ Drainage Pipe _No Labels Table _NZ Pipe Schedule 38

39 20 STRUCTURE Structure Name Description _NZ Drainage Pit _NZ Sewer _NZ SEP Structure Rule Set _NZ Drainage Pits _NZ Sewer Pits Label _NZ Drainage Pit Data _NZ Drainage Pit Name Table _NZ Pit Schedule 39

40 21 CORRIDOR DESIGN STANDARDS Name Description New Zealand _NZ Road Design Guidelines.xml 40

41 22 CORRIDOR Corridor Name Description _NZ Design Commands 41

42 23 ASSEMBLY Assembly Name Description _NZ Assembly Style Commands 42

43 24 SUBASSEMBLY Subassembly Name Description Commands 43

44 25 QUANTITY TAKEOFF Quantity Takeoff Criteria Name Description _NZ General purpose Table Total Volume Table Material Volume _NZ Cumulative Earthworks Table _NZ Material Table 44

45 26 QUANTITIES REPORT STYLE SHEETS Name Description Scripts StationFormatting.xsl NumberFormatting.xsl heets Select Material.xsl Mass Haul - Multiple Materials.xsl earthwork.xsl 45

46 27 SURVEY Survey Database Settings Name _NZ SurveyDb Settings.sdb_set Description Survey Equipment Database _NZ Common Survey Equipment.edb Extended Properties Definition _NZ Prototype LandXML.sdx-def The e-plan specification is still under development. Figure Prefix Database _NZ Figure Prefix Database.fdb Network _NZ Networks Figure _NZ Figures 46

47 28 VIEW FRAME GROUP Commands Name Description 47

48 29 VIEW FRAME View Frame Name Description _NZ View Frame Label View Frame _NZ View Frame General purpose 48

49 30 MATCH LINE Match line Label Match Line Left Label Match Line Right Name _NZ Matchline Plan _NZ Matchline Profile _NZ Matchline Left _NZ Matchline Right Description 49