Optimierung Schmiersysteme_V
|
|
|
- Melanie Webster
- 5 years ago
- Views:
Transcription
1 GÜDEL AG Industrie Nord CH-900 Langenthal Tel +1 (0) Fax +1 (0) info@ch.gudel.com Customer address Industrie Nord 900 Langenthal Schweiz Project Projectnumber Project description Optimierung Schmiersysteme_V B1R Optimization lubrication systems Functional unit R&D control system Responsible for project Created on R.Niederhauser by (short name) Document type Customer Project Optimization lubrication systems Optimierung Schmiersysteme_V Title page/cover sheet B1R Information s documentation =DOK +INFO 0 1
2 Functional assignment System Mounting location Component designation = FOL = CCF + CS - 0 K Abbreviation functional assignment Abbreviation plant Abbreviation installation site number Identifier Path number 0 Document type Customer Project Optimization lubrication systems Optimierung Schmiersysteme_V Equipment key B1R Information s documentation =DOK +INFO 1
3 Structure identifier overview F_00 Full designation Structure description Functional assignment =DOK =CCF =ODF &ELEKTRIK +INFO +PSU R&D control system documentation Control panel Controlpanel Electrical diagram Information s Control box +10 Carrier, plant +CT +LAY +BOM Control Layout information Parts list 0 Document type Customer Project Optimization lubrication systems Optimierung Schmiersysteme_V Structure identifier overview B1R Information s documentation =DOK +INFO 1
4 =CCF+PSU-S1 Cycle FlexxPump Output 1 / =CCF+PSU-S FlexxPump fill tubes =CCF+PSU-S Cycle Memolub =CCF+PSU-H Command Error =CCF+PSU-H Cycle on Cycle done =CCF+PSU-H8 FlexxPump overcurrent =CCF+PSU-H PLC ready =CCF+PSU-80X0 Flange bushing FlexxPump =CCF+PSU-1X1 IN V =CCF+PSU-80X Flange bushing Memolub =CCF+PSU-80X Flange bushing sensor Memolub Document type Customer Project Optimization lubrication systems Optimierung Schmiersysteme_V Layout control unit B1R Information s documentation =CCF&ELEKTRIK/0 =DOK +INFO 0 1
5 GÜDEL AG Industrie Nord CH-900 Langenthal Tel +1 (0) Fax +1 (0) info@ch.gudel.com Customer address Industrie Nord 900 Langenthal Schweiz Project Projectnumber Project description Optimierung Schmiersysteme_V B1R Optimization lubrication systems Functional unit R&D control system Module Control panel Document type ELEKTRIK Responsible for project Created on R.Niederhauser by (short name) =DOK&/0 Document type ELEKTRIK Customer Project Optimization lubrication systems Optimierung Schmiersysteme_V Title page/cover sheet B1R Information s Control panel =CCF 1 +INFO 0 1
6 Line colors Line cross section Main current 00 VAC L1 L L N PE black black black light blue green / yellow Main current Neutral conductor Grounding conductor min. 1,mm² min. 1,mm² min. 1,mm² Control voltage 0VAC Potential Potential grounded red red External voltages In front of main switch min. 1mm² min. 1,mm² Control voltage 0VAC min. 1mm² Control voltage VDC + - External voltages In front of main switch Dark blue white-blue orange Mark ends yellow Control voltage VDC PLC inputs / outputs Safety inputs / outputs PLC 1mm² 0,mm² 1mm² Standards nach IEC General IEC 00-1 Idendifikation IEC 81 Letter code IEC 0 Labels Material requirements Wire identification no Regulations Specification_electrical equipment Güdel Standard Special regulations None Device designation Yes On device and on installation place Interference suppression All contactors and valves are equipped with suppressor elements External labeling Cable no Yes Plastic plate 0 Document type ELEKTRIK Customer Project Optimization lubrication systems Optimierung Schmiersysteme_V Electrics material specifications B1R Information s Control panel =CCF +PSU/1 +INFO 1 1
7 -V / 1.0-0V / 1.0-1X1 /1.1 bn wh bu bk +10-1A1 Fieldbus module application power supply V Fieldbus module on plant +INFO/1 Orig Order Customer Project Optimierung Schmiersysteme_V PSU Replacement for Replaced by Power supply VDC B1R = CCF 1 1 1
8 1.9 / -V 1.9 / -0V -1XL0 01-1XL0 01-1XL / / / / / / / / / / / -1XL -1XL -.1 /.1 -. /. -. /. -. / -. / / /. 1 Orig Order Customer Project Optimierung Schmiersysteme_V PSU Replacement for Replaced by Distribution VDC B1R = CCF 1 1
9 I0.0 O0.0 /.1 /. I0. -A O0. -A -A1 X1 IN 8 1 V 0V BC BECKHOFF 8 PE KL189 KL PSU PSU-. 1 Document type ELEKTRIK Customer Project Optimization lubrication systems Optimierung Schmiersysteme_V PLC B1R Control panel Control box =CCF +PSU 1
10 1. +PSU PSU PSU FB_FP -FB_ML 80. -S1 Cycle FlexxPump Output 1 / 1 1 -S FlexxPump fill tubes 1 1 -S Cycle Memolub A /. I0.0 -S11 Cycle FlexxPump, Output 1 / -A /. I0. -S1 Cycle Memolub -A /. I V0 Feedback FlexxPump -A /. I0.1 -S1 FlexxPump fill tubes -A /. I B Feedback Memolub Orig Order Customer Project Optimierung Schmiersysteme_V PSU Replacement for Replaced by Signals internal B1R = CCF 1
11 PLC ready -Hx1 Cycle on / Cycle done -Hx1 Command Error -Hx1 FlexxPump empty -Hx1 FlexxPump overcurrent -H8x1 FlexxPump on V0 Memolub on V O0.0 O.1 O0. O0. O0. 0. O0. /. /. /. /. /. /. /. -A -A -A -A -A -A -A H LED green x1 x -H LED green x1 x -H LED red x1 x -H LED red x1 x -H8 LED red x1 x 1.0 +PSU PSU PSU PSU PSU Q_FP Q_ML 80. Orig PLC ready Order Customer Project Optimierung Schmiersysteme_V PSU Replacement for Cycle on Cycle done Replaced by Command Error FlexxPump empty Signals internal FlexxPump overcurrent FlexxPump B1R Memolub = CCF 80 1
12 +PSU Q_FP. +PSU FB_FP +PSU Q_ML.8 +PSU PSU FB_ML -80X0 /80.0 Flange bushing FlexxPump bn wh bu bk -80X /80. Flange bushing Memolub bn wh bu bk -80X /80. Flange bushing sensor Memolub bn wh bu bk -80W xxxx 0. m x V0 FlexxPump 1-80V Memolub 1 M + - M -80B Feedback Memolub + - Depending on the plant, -10W0 is connected to Memolub or FlexxPump Orig Order Customer Project Optimierung Schmiersysteme_V PSU Replacement for Replaced by Lubrication pumps B1R = CCF +LAY/
13 -901M0 110 mm +PSU-A1 +PSU-A +PSU-A +PSU-1XL0+PSU-1XL 180 mm +PSU/80 Orig Order Customer Project Optimierung Schmiersysteme_V LAY Replacement for Replaced by Switch cabinet design B1R = CCF
14 mm 0 mm 1 mm -901M1 R mm LED PLC ready R 8.1 mm mm 0 mm Button Cycle FlexxPump 0 mm LED Cycle on Cycle done LED Command error Button Fill tubes FlexxPump 0 mm 110 mm 0 mm LED FlexxPump empty 0 mm 0 mm Button Cycle Memolub LED FlexxPump overcurrent 1 mm 180 mm 900 Orig Order Customer Project Optimierung Schmiersysteme_V LAY Replacement for Replaced by Switch cabinet design, cover B1R = CCF
15 -90M mm mm mm mm 111 mm R 8. mm 0 mm 0 mm 110 mm 901 Orig Order Customer Project Optimierung Schmiersysteme_V LAY Replacement for Replaced by Switch cabinet design, side B1R = CCF +BOM/1 90 1
16 Parts list Cable on cable reel DT Quantity Subset Designation Order number Manufacturer Part number +PSU-A1 1 Bus Terminal Controller Ethernet-TCP/IP BC9000 Beckhoff PSU-A 1 Bus terminal HD, 8DI/DO, VDC KL189 Beckhoff PSU-A 1 System terminal bus end KL9010 Beckhoff PSU-H 1 LED Indicator, green, VDC QS10XXG APEM PSU-H 1 LED Indicator, green, VDC QS10XXG APEM PSU-H 1 LED Indicator, red, VDC QS10XXR APEM PSU-H 1 LED Indicator, red, VDC QS10XXR APEM PSU-H8 1 LED Indicator, red, VDC QS10XXR APEM PSU-S1 1 Pushbutton, 1NC/NO, black /010 RAFI PSU-S 1 Pushbutton, 1NC/NO, black /010 RAFI PSU-S 1 Pushbutton, 1NC/NO, black /010 RAFI PSU-80W m Circular plug-in connector M1 plug straight, M1 female straight, -pin, L = 0.m gray Murrelektronik PSU-1X1 1 Male socket, M1, -pin, 0.m Murrelektronik 001 +PSU-80X0 1 Flange socket, M1, -pin, 0.m Murrelektronik PSU-80X 1 Flange socket, M1, -pin, 0.m Murrelektronik PSU-80X 1 Flange socket, M1, -pin, 0.m Murrelektronik PSU-1XL0 Through terminal -wire.mm² gy 80-8 Wago PSU-1XL Through terminal -wire.mm² gy 80-8 Wago LAY-901M0 1 Housing PK 180x110x111mm (WxHxD) RAL0 without knockouts PK Rittal 101 +LAY/90 Document type ELEKTRIK Customer Project Optimization lubrication systems Optimierung Schmiersysteme_V Parts list B1R Control panel Parts list =CCF +BOM 1 1
M8, M12, 3-, 4-, 5-, 8-, 12-pin, LED, shielded
ACCESSORIES M8, M12, 3-, 4-, 5-, 8-, 12-pin, LED, shielded ipf electronic gmbh Kalver Straße 25-27 58515 Lüdenscheid Germany Tel +49 2351 9365-0 Fax +49 2351 9365-19 111 1000 CABLE SOCKETS NOTES 112 ipf
Connecting cables for valves, Sub-D socket Type codes
Connecting cables for valves, Sub-D socket Type codes K MP3 K Connecting cable on the left, field device side MP3 Sub-D socket Number of pins/wires, left 9P 25P 9-pin 25-pin Number of pins/wires, right
TURCK Industrial Connectivity Products
TURCK Industrial Connectivity Products multibox eurofast Low Profile Junction Boxes Single Output per Port Rugged Plastic Housing Available with or without LEDs M23 Quick Disconnect Integral Home Run Cable
EPGG001. Fieldbus Gateway RS-232 to PROFINET. Industrial Communication. Technical Data. Part Number
Fieldbus Gateway RS-232 to PROFINET EPGG001 Part Number Easy handling Gateway from RS-232/422/485 interfaces to PROFINET With two Industrial Ethernet ports Technical Data Electrical Data Supply Voltage
3-pin Qualified for drag chain use Oil-resistant and flame-retardant Free from halogen, silicone, PVC and LABS culus approved
Connection and Extension s 7/8" PUR Gray 3-pin Qualified for drag chain use Oil-resistant and flame-retardant Free from halogen, silicone, PVC and LABS culus approved Plastic, TPU, Black TPU, Black Pollution
TURCK Industrial Connectivity Products
TURCK Industrial Connectivity Products multibox eurofast Junction Boxes, 4-Ports Rugged Plastic Housing with Flush Connectors Available with or without LEDs Quick Disconnect or minifast Connector 4-, 2-Signals
optical sensors through-beam, retro-reflective, dif. reflection sensors 3000 transmitter with test input robust metal housing
design 12 x 12 x 64mm 12 x 12 x 69mm 12 x 12 x 74mm operating distance retro-reflective sensor operating distance diffuse reflection sensor sensing range up to 6.0m up to 4.0m up to 1.2m metal housing
Float switch For industrial applications Model RLS-1000
Level measurement Float switch For industrial applications Model RLS-000 WIKA data sheet LM 50.0 Applications Level measurement of liquids in machine building Control and monitoring tasks for hydraulic
Technical data. General specifications. Transducer frequency Indicators/operating means
Model Number Features Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably papers Short version No TEACH-IN required Function indicators visible from all
DESINA installation technology
DEcentralized Standardized INstAllation technology DESINA describes an extensive concept for the standardization and decentralization of the fluid power and electrical installation of machines and applications.
Accessories Bus Terminals
Accessories s Connectors Lightbus Z1000 Z1010 Z1020 standard connector for 1,000 µm plastic fibre standard connector for 200 µm PCS fibre coupling for Z1000 PROFIBUS ZB3100 ZB3101 ZB3102 ZS1031-3000 ZS1031-3500
Operating instructions Evaluation system for flow sensors VS / / 2013
Operating instructions Evaluation system for flow sensors VS3000 7097 / 0 07 / 203 Contents Preliminary note...2 2 Safety instructions...3 3 Function and features... Mounting.... Mounting of the sensors...
Original operating instructions Safety relay with relay outputs G1501S / / 2016
Original operating instructions Safety relay with relay outputs G50S UK 8023637 / 00 02 / 206 Contents Preliminary note...4. Symbols used...4 2 Safety instructions...5 3 Items supplied...6 4 Functions
Online data sheet VTE18-4P4240 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTE8-P0 V8 VTE8-P0 V8 A B C D E F Illustration may differ Ordering information Type Part no. VTE8-P0 606 Other models and accessories www.sick.com/v8 H I J K L M N O P Q R S T Detailed
camera sensor ipf opti-check 1070 fully integrated camera system contour-based recognition
ipf opti-check 1070 53 x 99.5 x 38mm camera sensor operating distance variable C-mount for lenses integrated flash controller short set-up times because of up to 255 check programs with up to 32 feature
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS. TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
Technical data. General specifications. Indicators/operating means
Release date: 08-0-08 0:7 Date of issue: 08-0-09 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
EC07 EC63. Compatible actuators: ERL2 ESD2. How to order EC 07 B. Series. B Installation. method
Controller EC07 EC63 Compatible actuators: ERL ESD Features Compact, light weight and thin (Body width 35mm) Can be set without manual Perfect installation compatibility with actuator PC software available
FC7 Optical Fork for labels. Photoelectric Sensors
Optical Fork for labels Photoelectric Sensors Catalogue CAT3EFC1372201 Catalogue english Ed.01/2013 2/3 Products fork Series Fork www.microdetectors.com Industries and applications label recognition labels
Sensor Connectivity Introduction Global Plus Connector Cables Multi-Connector Blocks. Product Selection Guide...
.0 Introduction Product Selection Guide.................................... Product Description....................................... Standards and Certifications................................ Product
Online data sheet VS/VE18-4P3140 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VS/VE8-P0 V8 VS/VE8-P0 V8 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Sensor/ detection principle Housing design (light emission) Housing
Fork Sensors. catalogue
Fork Sensors catalogue 2/3 Products FC forks Sensori capacitivi Fork sensors Photoelectric fork sensors for object detection FC5 p.6 FC6 p.12 Photoelectric fork sensors for labelling detection FC7 p.18
ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description
Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with
Online data sheet VL18-4P3140 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VL8-P0 V8 VL8-P0 V8 A B C D E F Illustration may differ Ordering information Type Part no. VL8-P0 605 Other models and accessories www.sick.com/v8 H I J K L M N O P Q R S T Detailed technical
Your Global Automation Partner. Teachable Capacitive Sensors. Operating Instructions
Your Global Automation Partner BCT- Teachable Capacitive Sensors Operating Instructions 2 Hans Turck GmbH & Co. KG T +49 208 4952-0 F +49 208 4952-264 more@turck.com www.turck.com 1 About These Instructions
Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 0--9 07:6 Date of issue: 0-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS. TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
VM series. features. web contents. code description. available models. inductive sensors. Cylindrical M12 in AC B H
VM series Cylindrical M2 in AC inductive sensors warranty features warranty Output: cable and M2 plug cable exit Models with 2 wires IP67 protection degree Multivoltage 20...253 Vac web contents Application
Switches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
Safety Monitoring Relays
Safety Monitoring Relays G9SA G9SA Safety Relay Unit Four kinds of 45-mm wide units are available: A 3-pole model, a 5-pole model, and models with 3 poles and 2 OFF-delay poles, as well as a two-hand controller.
Original operating instructions Safety relay with relay outputs with and without delay G1502S / / 2016
Original operating instructions Safety relay with relay outputs with and without delay UK G50S 803638 / 00 0 / 06 Contents Preliminary note...4. Symbols used...4 Safety instructions...5 3 Items supplied...6
Installation instructions Diagnostic electronics for vibration sensors VSE / / 2007
Installation instructions Diagnostic electronics for vibration sensors UK VSE00 70406 / 00 07 / 2007 Contents Safety instructions 3 Function and features 4 Mounting 4 Mounting of the sensors 5 Electrical
Color Mark Photoelectric Sensor E3S-VS
Sensing Supply voltage Output 12 to 80 ma, with 1.5 to 4 ma constant current source; 1.2 cm, 5 cm 100 ma, Color Mark Photoelectric Sensor Small Color Mark Sensor With Built-In DC Amplifier Fast, 1 ms maximum
0.25m long cable directly out of the sensor. Blue laser line (405nm) for (semi-) transparent, red-hot glowing and organic materials
Options, cables and accessories scancontrol 2x0/29x0 Options*: /SI Integrated sensor ON/OFF /PT Pigtail cable Hardware ON/OFF of the laser line 0.2m long cable directly out of the sensor /3B Class 3B /BL
Rotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
ECL150/ECL150e. Eddy-Current Displacement Sensor INSTRUCTION MANUAL. Measurement Systems from LION PRECISION
INSTRUCTION MANUAL ECL150/ECL150e Eddy-Current Displacement Sensor Measurement Systems from LION PRECISION Lion Precision 563 Shoreview Park Road St. Paul, Minnesota 55126-7014 Telephone: 651-484-6544
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
GPLS-25 DATASHEET Março 2012
GPLS-25 DATASHEET Março 2012 THRU-WALL LEVEL SWITCHES GPLS 25 For liquids limit level sensing on non-conductive (glass or plastic) gauge-pipes, tubes and tank walls Miniature performance in plastic housing
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
Safety Light curtains - XUSL
Safety Light curtains - XUSL Connection Schematics The wiring from the XUSL2E/XUSL4E light curtain system to the machine control circuit must be control reliable. The solid-state outputs should be connected
Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
Easy Arc Integration into a Simatic S7-300 Process Control System
Easy Arc Integration into a Simatic S7-300 Process Control System Quick Guide An Introduction on how to Integrate a Hamilton Sensor successfully into a PCS Table of Contents Table of Contents 1 Introduction...
Operating instructions. Switching amplifier DN0210 DN / / 2015
Operating instructions Switching amplifier DN0210 DN0220 UK 80011079 / 00 01 / 2015 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5
CJ series Ergonomic multifunction joysticks
an APEM Group Company CJ series The CJ Series joystick features an ergonomic multifunction handle purposely designed for safety critical hand-operated applications. Available as a one or two axes joystick,
Technical data. General specifications. factory setting: 125 ms Memory Non-volatile memory Write cycles Indicators/operating means
Model Number Single head system Features IO-link interface for service and process data Programmable via DTM with PACTWARE Switch output and analog output Selectable sound lobe width Synchronization options
Multi-axis force-torque-sensor K6D27
Multi-axis force-torque-sensor K6D27 Components Fx Fy Fz Mx My Mz Measuring ranges 50N 50N 200N 1Nm 1Nm 1Nm The K6D27 multi-element sensor is suitable for measuring the forces in three spatial axes and
LVX Control Unit. Features:
Date 2013-02-28 Control Unit Features: Most parameters can be defined as required for your interfaces. You decide which information is output and how. Fast cycle times, just a few µs/beam. Maximum beam-count
Photoelectrics Diffuse-reflective, Background Suppression Type PH18CNB20...
Photoelectrics Diffuse-reflective, Background Suppression Type PH8CNB... Miniature sensor range Range: mm Sensitivity adjustment by potentiometer Modulated, red light 65 nm Supply voltage: to VDC Output:
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
TOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS For the very first time, sensor/actuator wiring is pluggable between
Conect 121 Upgrade. Copyright 2013 Conqueror Design and Engineering Ltd.
All rights reserved. Any dispute about the use of this software and/or hardware or of these terms and conditions shall be resolved or arbitrated under English Law. Manuals and accompanying documentation
Accessory Kit for all Designs of Hand-held Pendant Station
Overview of accessories for hand-held pendant station kits Accessories for kit Suitable for all designs Hand-held pendant stations HBA/HBM Hand-held pendant stations HBL EMERGENCY- STOP device Pushbutton
Revolutionizing control wiring
SmartWire-DT Panel Wiring Solutions Revolutionizing control wiring 797-6925 Fax: (215) 221-1201 www.royalelectric.com SmartWire-DT Changing the way panels are wired. Reduce cost throughout the value chain.
RTU560 Remote Terminal Unit Connections and Settings
Remote Terminal Unit Connections and Settings Communication Unit 560CMG10 Application, characteristics and technical data have to be taken from the hardware data sheet: 560CMG10 1KGT 150 645 Operation
Features: SF108-CR v1.1 SF108-CR 10-ports switch for 8 IP cameras in enclosure with recorder space
SF108-CR v1.1 SF108-CR 10-ports switch for 8 IP cameras in enclosure with recorder space Edition: 2 from 05.04.2018 Supercedes the edition: 1 from 04.09.2017 EN** Features: Switch 10 ports 8 PoE ports
FACTORY AUTOMATION QUICK START GUIDE IC-KP-*
FACTORY AUTOMATION QUICK START GUIDE IC-KP-* IDENTControl units With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for Products
Data Sheet for Joysticks
Series TRY or axes Life expectancy of Millionen cycles Sealed up to IP68 Multifunction handle for additional functions, e.g. Switches, Rockers, Deadman also available with USB- or CANbus-Interface The
HAWK MV-4000 Smart Camera
HAWK MV-4000 Smart Camera Configuration Guide Hardware Required Item Description Part Number HAWK MV-4000 Smart Camera 8XX-XXX0-00X Lens, C-Mount 98-9000XX-0 3 IP67 Lens Cover for HAWK MV-4000, 50 mm or
ParCon and PosCon line sensors
and line sensors and line sensors Introduction 364 Overview product family measuring mode: edges, width measuring mode: edges, width measuring mode: sum of all dark areas, edges switchable measuring field
Technical Data, 4-way High Voltage. Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Materials List
Technical Data, 4-way High Voltage APD 4-way connectors are the original DIN72585 (now ISO 15170) versions using a 2,5 mm contact system. Designed for automotive applications they also meet the requirements
MS series Mid-size Hall effect joysticks
Distinctive features and specifications Compact size 1, 2 and 3 axis configurations Sealed up to IP68 Available with USB Redundant outputs available 1 million life cycles Available with J1939 CANbus and
Non-Contact Safety System CES-AZ
, 0 M 8 8,, 7,,,, 0 0 7 0 7 Mounting plate CEM For read head CEM-A-LE0... and actuator CEM-A-BE0... Material stainless steel Mounting plate EMP-L-CEM0 For read head CEM-A-LE0... 9 8 0 8 M - x, 7 Mounting
Service case with test device for proportional valves with integrated electronics (OBE)
Service case with test device for proportional valves with integrated electronics (OBE) Type VT-VETSY-1 RE 29685 Edition: 2014-04 Replaces: 03.11 Component series 1X H 5967_d Features Service case contains
Photoelectric Sensors Enhanced 50 Series
June 2008 Contents Overview...................... Model Selection, Sensors......... 2 Model Selection, Compatible Cables.............. 7 Model Selection, Fiber Optic Cables................... 8 Model Selection,
Active Distributors AS-i Safety, Active Distributors AS-i
Active Distributors Safety, Active Distributors x connectors for Periphery connection via, M cable sockets or push in terminals (Figure similar) Figure Type Inputs Safety, SIL, Cat. x 9 mm, -channels Safety
Technical Data. Dimensions
Model Number Features 50 mm flush -wire DC S Technical Data specifications Switching function Normally open (NO) Output type PNP Rated operating distance s n 50 mm Installation flush Output polarity DC
Encoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
MSR 2400W. Multi purpose Power System for Telecom and Industrial Applications. Nominal Output Voltage. Voltage Setting Range
MSR 2400W Multi purpose Power System for Telecom and Industrial Applications 2400 W modular system All voltages available 0 144VDC per module U and I adjustable from 0 to max value Hot-swap plug-in modules
Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
HI HIPS Logic Solver (2oo3)
General Specifications GS48C00Z00-00E-N HI-100-00 HIPS Logic Solver (2oo3) INTRODUCTION HIPS is the abbreviation for High Integrity Protection System. A HIPS is a specific application of a Safety Instrumented
Application Package Dimension Output Input Output Output Protection Option Code Code Power Voltage Quantity Voltage Type (W) (VAC) (VDC)
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE T A H 450 U S 12 - F2 Application Package Dimension Output Input Output Output Protection
GEMÜ 4232 Travel sensor for linear actuators
Travel sensor for linear actuators Features ATEX version available as an option Easy fitting to GEMÜ linear actuators Compact, stable housing Durable Can be retrofitted to GEMÜ valves or third-party actuators
The sensor fulfills the specifications of the EMC requirements, if the instructions in the manual are followed.
Assembly Instructions scancontrol 2600/2650/2900/2950 1. Warnings Connect the power supply and the display-/output device in accordance with the safety regulations for electrical equipment. The power supply
HD22 and HD30 Service Parts
HD and HD0 Service Parts This is the list of service parts and wiring diagrams for all versions of these two hotel dispensers. Pay close attention to the voltage and/or cycles to be sure of ordering the
3RG7 Opto-BERO Photoelectric Proximity Switches
K 80 Sensing range 2 m (energetic sensor) Diffuse sensors Modulated infrared light DC or AC/DC M 12 plug or moulded plastic joint IP 67 ON-delay, OFF-delay, pulse shaping Timer 0.01 s to 10 s Enabling
Technical Data. General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm. Short-circuit protection
NCN-FK-N-V-V 002 Model Number NCN-FK-N-V-V Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection Fixed setting EC-Type Examination Certificate TÜV99
Round Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant
Operating instructions Optical distance sensor. OID25x / / 2015
Operating instructions Optical distance sensor OID25x 80228366 / 00 03 / 2015 Contents 1 Preliminary note...3 1.1 Symbols used...3 2 Safety instructions...3 3 Functions and features...4 3.1 Applications...4
AS-Interface I/O Module
AS-Interface I/O Module Construction The AS-Interface I/O module is designed as a compact, robust field module. It is composed of an electronic module (top) and a coupler module (base). Connectors (standard
Electrical Interconnection
Electrical Interconnection Edition 208/ Rail-Mount Terminal Block Systems Full Line Catalog, Volume Edition 207/208 PCB Terminal Blocks and Connectors Full Line Catalog, Volume 2 Edition 207/208 2 Automation
HG series Hand grip Hall effect joysticks
Distinctive features and specifications Rugged, hand operation Hall effect sensing Sealed up to IP68 1 million life cycles Redundant outputs available Analog, USB and custom outputs CANbus J1939 and CANopen
CX series high resolution Area Sensor in compact housing. Area Sensors
CX series high resolution Area Sensor in compact housing Area Sensors Catalogue Cod. CATECX4780 Datasheet - CX - english - Ed.0/0 / Products high resolution compact housing Series CX high resolution compact
Air damper actuators
4 604 OpenAir Air damper actuators Rotary version, AC/DC 24 V and AC 230 V GQD...1 GQD 1 Electric motor-driven actuators for two-position and three-position control as well as DC 0 10 V control 2 Nm nominal
Connectors. Technical guide
Some examples: The components in the «Connector» range are designed to carry control and/or power signals between the different parts of an automated system. The range includes, among others, the M, M,
BTL6-A_10-M -A1-S115. Data Sheet. english
BT6-A_10-M -A1-S11 english Data Sheet Balluff GmbH Schurwaldstrasse 9 76 Neuhausen a.d.f. Germany Phone +49 (0) 71 8/1-0 Fax +49 (0) 71 8/0 10 Servicehotline +49 (0) 71 8/1-70 E-Mail: balluff@balluff.de
Profibus-DPV1 Set in IP67 TI-BL67-DPV1-6
Type designation Ident no. 1545030 Number of channels 6 Dimensions (W x L x H) 172 x 145 x 77.5 mm Cable max. 50 m between interface and read/write head 3 decimal rotary coding switches for the adjustment
MACO MULTI E-HARDWARE
TECHNOLOGY IN MOTION MACO MULTI E-HARDWARE E- interfaces DOCUMENTATION WIRING DIAGRAM QUESTIONS AND ANSWERS CONTENTS Universal wiring diagram 2 Technical connection information 3 General questions and
Assembly Instructions scancontrol 2700/2750 (500)
Assembly Instructions scancontrol 2700/2750 (500) 1. Warnings Connect the power supply and the display-/output device in accordance with the safety regulations for electrical equipment. The power supply
PHOENIX CONTACT - 05/2007
Ex Universal Module Carrier (Motherboard) for Accommodating 3-Wire Measuring Transducers, Intrinsically Safe, for a Maximum of 8 PI Ex Modules INTERFACE Data Sheet 103030_00_en PHOENIX CONTACT - 05/2007
EZ-SCREEN AC Interface Box
EZAC Series for use with Type 4 Emitters and Receivers Emitter-only models Features Emitter/Receiver models AC power supply for use with EZ-SCREEN Safety Light Screen sensors. Models EZAC-R.. can be interfaced
IB IL 120 DI 1. Function. INTERBUS Inline Terminal With One Digital Input in the 120 V AC Voltage Area. Data Sheet 5764B
INTERBUS Inline Terminal With One Digital Input in the 120 V AC Voltage Area Data Sheet 5764B 09/2000 # % $ This data sheet is only valid in association with the INTERBUS Inline System Manual IB IL SYS
GSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
Interfaces Service and Field
Interfaces Service and Field Front Panel Interfaces Interfaces Service Receptacles Cable Entry Systems 02 TRANSFORMATOREN 03 MODLINK MSDD THE CONNECTION TO THE OUTSIDE WORLD A safe bet MARKET REQUIREMENTS
RXB10.1. Room controller. Siemens Building Technologies Building Automation DESIGO RXB. for chilled ceilings and radiators with EIB bus communication
3 870 DESIO RXB Room controller for chilled ceilings and radiators with EIB bus communication RXB10.1 The RXB10.1 controller is used for temperature control in individual rooms: For chilled ceilings and
Installation instructions Inclination sensor EC2019 EC / / 2013
Installation instructions Inclination sensor UK EC219 EC245 739215 / 3 1 / 213 Inhalt 1 Safety instructions 3 2 Mounting 4 3 Electrical connection 4 4 Dimensions 4 5 Technical Data 5 6 Characteristics
Dimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Pinout OBE12M-R100-S2EP-IO-V31
OBEM-R00-SEP-IO-V Dimensions. 8.7. 7..9. M (x).. ø... 0 9.9 7. 7. Release date: 08-06-08 :0 Date of issue: 08-06-08 80998_eng.xml Model Number OBEM-R00-SEP-IO-V Thru-beam sensor with -pin, M8 x connector
WAGO Kontakttechnik GmbH & Co. KG
0 WAG Kontakttechnik GmbH & Co. KG Project name: Project number: Drawing number: : Part number: CS_DE_00_ CS_DE_00 CD_AC_V LM max. AC_V_LM_max 00-000/000-000 Customer: WAG Kontakttechnik GmbH & Co.KG Hansastraße
1/2 microfast Connectivity
Part Number Keys Cordsets Receptacles Field Wireables Adapters E2 E4 E8 E16 E17 microfast Features y 2 to 6 pin y Up to 4 Amp, 250 Volt rated y IEC IP67 protection y NEMA 6P rated y Low current AC applications
Classification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.