JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564

Transcription

1 JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Compressed Air Technical Information 562 Compressed Air Fittings 563 Brass Compressed Air Fittings 564 Compressed Air Pipe & Accessories 565 ELEVEN Accessories 566 Pneumatic Fittings Technical Information 567 Pneumatic Fittings - Metric 568

2 JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Pneumatic Fittings - Imperial 573 Banjo Flow Controls 575 Pneumatic Miniature Fittings 576 Plumbing & Heating Fittings 577 Valves 579 Flexi Hose & Barrier Pipe 581 LLDPE Tube 582 ELEVEN

3 COMPRESSED AIR TECHNICAL INFORMATION EASY TO USE PUSH-FIT SYSTEM FOR COMPRESSED AIR The John Guest range of push-in fittings and pipe, provide the ideal connection from compressor receiver to air line service components, through to complete ring main and take-off points. A compressed air system can be installed quickly and easily, compared with other installation methods; time savings of at least 50% are easily achievable. There is no need to prepare threaded pipe or solvent, all the connections can be made with a simple push-in action. The system is then immediately ready for use. Complex systems can be assembled much more rapidly than with traditional methods and because fittings are easy to disconnect, systems can be altered or extended with much reduced production down-time. The fittings are produced in either a tough engineering plastic material or in brass, in sizes 12 mm to 28 mm. They are intended for use with John Guest Nylon pipe but can also be used with Copper or Aluminium pipe. FOOD QUALITY All fittings in the John Guest Section with this symbol are produced in Food and Drug Administration (FDA) approved materials and are therefore recommended for food quality applications. Speedfit R THE PUSH-FIT SOLUTION FOR PLUMBING & HEATING SYSTEMS ARE ALSO AVAILABLE Speedfit FEATURES / BENEFITS Installation time reduced by at least 50% Lightweight, easy to handle Safe, secure, leakproof Easy to alter or extend a system No corrosion, reduced maintenance TUBE TYPES John Guest fittings are suitable for use with a wide range of plastic and soft metal tubing including UPVC, ABS, Polyethylene, Nylon, Mild Steel and Copper to the tolerances set out, to the right. Soft plastic tube, such as nylon, is to have a minimum wall thickness of 1.5 mm. The tube should also have a good quality surface and be damage free. WORKING PRESSURE Temperature +23 C +70 C 12mm - 28mm OD 10 bar 7 bar Working temperature -20 C to +70 C for use with air MATERIALS Bodies Acetal copolymer O-Rings Nitrile rubber Collets Acetal copolymer with stainless steel teeth TUBE TOLERANCES Size 12mm - 28mm OD Tolerance mm to mm OD 562

4 COMPRESSED AIR FITTINGS THE WATER TRAP TEE The Water Trap Tee solves the on-going problem of moisture in a Ring Main System and provides the easy alternative to the need to install Swan Necks. The ingenious inside arrangement of the fitting allows air to flow, with minimum head loss, from the main to take-off point, without allowing water to follow. The moisture is retained in the line to be drawn off at some suitable location. WATER TRAP TEE JGPMTT22E 22 mm STRAIGHT CONNECTOR MALE BSPP WITH O RING THREAD SEAL JGPM011213E 12 mm 3/8 BSPP 2.70 JGPM011214E 12 mm 1/2 BSPP 2.96 JGPM011513E 15 mm 3/8 BSPP 3.31 JGPM011514E 15 mm 1/2 BSPP 3.47 JGPM011516E* 15 mm 3/4 BSPP 3.97 JGPM011814E 18 mm 1/2 BSPP 3.69 JGPM012216E 22 mm 3/4 BSPP 3.89 JGPM012818E 28 mm 1 BSPP 6.27 * No thread seal STEM ADAPTOR MALE BSPP WITH O RING THREAD SEAL JGPM051213E 12 mm 3/8 BSPP 1.45 JGPM051214E 12 mm 1/2 BSPP 1.62 JGPM051513E 15 mm 3/8 BSPP 1.56 JGPM051514E 15 mm 1/2 BSPP 1.98 JGPM051814E 18 mm 1/2 BSPP 2.21 JGPM052214E 22 mm 1/2 BSPP 2.39 JGPM052216E 22 mm 3/4 BSPP 2.84 STRAIGHT CONNECTOR JGPM0412E 12 mm 2.32 JGPM0415E 15 mm 2.63 JGPM0418E 18 mm 3.29 JGPM0422E 22 mm 3.97 JGPM0428E 28 mm 8.18 REDUCER STEM OD TUBE OD JGPM061510E 15 mm 10 mm 3.26 JGPM061512E 15 mm 12 mm 3.32 JGPM061815E 18 mm 15 mm 3.97 JGPM062215E 22 mm 15 mm 3.97 JGPM062218E 22 mm 18 mm 3.97 JGPM062815E 28 mm 15 mm 6.21 JGPM062822E 28 mm 22 mm 7.45 EQUAL ELBOW JGPM0312E 12 mm 3.06 JGPM0315E 15 mm 3.64 JGPM0318E 18 mm 4.54 JGPM0322E 22 mm 5.45 JGPM0328E 28 mm 9.83 STEM ELBOW STEM OD TUBE OD JGPM221212E 12 mm 12 mm 3.07 JGPM221515E 15 mm 15 mm 3.64 JGPM221818E 18 mm 18 mm 4.54 JGPM222222E 22 mm 22 mm 5.45 EQUAL TEE JGPM0212E 12 mm 3.23 JGPM0215E 15 mm 3.83 JGPM0218E 18 mm 4.79 JGPM0222E 22 mm 5.76 JGPM0228E 28 mm REDUCING TEE TUBE OD ENDS TUBE OD BRANCH JGPM3018AE 18 mm 15 mm 6.16 JGPM3022AE 22 mm 15 mm 6.16 END STOP JGPM4612E 12 mm 2.35 JGPM4615E 15 mm 2.58 JGPM4622E 22 mm 3.10 U-BEND JGPMUB15E 15 mm

5 COMPRESSED AIR FITTINGS PORTING BLOCK CONNECTIONS JG-L-WSK 5 x 1/ ALUMINIUM WALL BOX SIZE JGWALLBOX4 1/ JGWALLBOX5 3/ BRASS COMPRESSED AIR FITTINGS THE WATER TRAP TEE CONVERTOR The Water Trap Tee Convertor is a simple and convenient way of converting a standard 28 mm Tee, Part No. JGPMTT22E page 519, to a Water Trap Tee. When fitted, it will stop condensed water within the Air Ring Main System from entering the vertical take off spurs. It is important that the Ring Main has been installed with the correct fall and water drain points are regularly vented. BRASS WINGBACK ELBOW FEMALE BSP JGPM15WB 15 mm 1/2 BSP JGPM22WB 22 mm 3/4 BSP WATER TRAP TEE CONVERTOR JGWTC28 28 mm 8.59 MALE BRASS STEM ADAPTOR MALE BSPT / BSP JGMM051504N 15 mm 1/2 BSPT 8.33 JGMM052206N 22 mm 3/4 BSPT JGMM052818N 28 mm 1 BSP Converts Push Fit end to male thread BRASS STRAIGHT ADAPTOR MALE BSPT JGMM011504N 15 mm 1/2 BSPT 7.61 JGMM012206N 22 mm 3/4 BSPT JGMM012808N 28 mm 1 BSPT FEMALE BRASS STEM ADAPTOR FEMALE BSP JGMM501514N 15 mm 1/2 BSP 8.33 JGMM502216N 22 mm 3/4 BSP Converts Push Fit end to male thread MALE BRASS STEM ADAPTOR MALE NPT JGMM052226N 22 mm 3/4 NPT JGMM052228N 22 mm 1 NPT JGMM052828N 28 mm 1 NPT Converts Push Fit end to male thread 564

6 COMPRESSED AIR PIPE AND ACCESSORIES JOHN GUEST BLUE RIGID NYLON PIPE TUBE OD TUBE ID LENGTH JGPARM mm 9 mm 3 mtrs 7.74 JGPARM mm 12 mm 3 mtrs 9.77 JGPARM mm 14 mm 3 mtrs JGPARM mm 18 mm 3 mtrs JGPARM mm 23 mm 3 mtrs ALUMINIUM PIPE CUTTER JGALCUTR15 15 mm JGALCUTR18 18 mm JGALCUTR22 22 mm JGALCUTR28 28 mm JOHN GUEST POWDER COATED ALUMINIUM PIPE TUBE OD TUBE ID LENGTH JGAL-RM mm 13 mm 3 mtrs JGAL-RM mm 16 mm 3 mtrs JGAL-RM mm 20 mm 3 mtrs JGAL-RM mm 26 mm 3 mtrs TUBE CUTTER LIGHT DUTY DESCRIPTION JGTSNIP Tube cutter 7.29 JGBLADENIP Blade 3.26 PIPE CUTTER HEAVY DUTY DESCRIPTION JGHDC Pipe cutter JGBLADE-HDC Blade For up to and including 12mm pipe For up to and including 28mm pipe DEBURRING TOOL DESCRIPTION JGDEBURR Deburring tool PIPE CUTTER MEDIUM DUTY DESCRIPTION JGJGTS Disposable pipe cutter For up to and including 22mm pipe 565

7 ACCESSORIES COLLET COVERS METRIC TUBE OD COLOUR JGPM1904E 4 mm Black 0.13 JGPM1905E 5 mm Black 0.14 JGPM1906E 6 mm Black 0.21 JGPM1908E 8 mm Black 0.22 JGPM1910E 10 mm Black 0.24 JGPM1912E 12 mm Black 0.25 JGPM1915E 15 mm Black 0.33 JGPM1918E 18 mm Black 0.36 JGPM1922E 22 mm Black 0.43 COLLET COVERS IMPERIAL TUBE OD COLOUR JGPM1904S 5/32 Grey 0.13 JGPI1906S 3/16 Grey 0.14 JGPI1908S 1/4 Grey 0.16 JGPI1908G 1/4 Green 0.16 JGPI1908R 1/4 Red 0.16 JGPI1908Y 1/4 Yellow 0.16 JGPM1908S 5/16 Grey 0.22 JGPI1912S 3/8 Grey 0.22 JGPI1912B 3/8 Blue 0.22 JGPI1912G 3/8 Green 0.22 JGPI1912R 3/8 Red 0.22 JGPI1912Y 3/8 Yellow 0.22 JGPI1916S 1/2 Grey 0.24 PLUG TUBE OD COLOUR JGPM0812R 12 mm Red 1.03 JGPM0815E 15 mm Black 1.17 JGPM0818E 18 mm Black 1.31 JGPM0822E 22 mm Black 1.40 JGPM0828E 28 mm Black 1.83 FLOW BEND CLIP JGPM2608S 8 mm / 5/ JGPM2610S 10 mm / 3/ PIPE CLIP JGPM15TPC 15 mm 0.28 JGPM18TPC 18 mm 0.30 JGPM22TPC 22 mm 0.28 JGPM28TPC 28 mm 0.40 JGPMPCS Pipe clip spacers 0.21 RELEASE AID JG15RA 15 mm 0.55 JG22RA 22 mm 0.87 JG28RA 28 mm 1.28 LOCKING CLIP JGPIC1808R 1/ JGPIC1812R 3/ JGPMC1815R 15 mm 0.21 COLLET LOCKING TOOL SIZE JGICLT/2 3/16 to 1/

8 PNEUMATIC FITTINGS TECHNICAL INFORMATION DESCRIPTION Super Speedfit push-in fittings have been specially designed for miniature pneumatic applications. They provide a fast and secure way of connecting tubes and offer considerable advantages over conventional fittings. Complex tubing systems can be assembled more rapidly than with traditional methods and because Super Speedfit fittings are easy to disconnect, fault finding and maintenance become much easier operations. FEATURES / BENEFITS Specially designed for pneumatics Suitable for plastic and soft metal tubes Grips before it seals Quick disconnection and reusable No tools needed Quality Manufacturer - ISO 9001 listed since 1989 Superior flow characteristics Collet cover prevents accidental disconnection and allows colour coding Fittings with prefix JGPM or JGPI are produced exclusively in Food and Drug Administration approved materials and are therefore recommended for food quality applications. FOOD QUALITY All fittings in the John Guest Section with this symbol are produced in Food and Drug Administration (FDA) approved materials and are therefore recommended for food quality applications. METRIC SIZED PNEUMATIC FITTINGS - SUPER THREAD Selected metric size items have SuperThread, a unique thread seal developed by John Guest to enable male adaptors to be used with a variety of female thread forms. The special Polyurethane seal feature means no sealant needs to be applied to make an airtight joint. There is no danger of tape entering the system. Fittings with SuperThread also have countersunk throughbores to provide superior flow characteristics. The design allows for a smaller compact body and reduced hexagon size. WORKING PRESSURE Temperature -20 C +23 C +70 C 4 mm - 8 mm & 5/32-5/16 16 bar 16 bar 10 bar 10 mm - 22 mm & 3/8-1/2 10 bar 10 bar 7 bar MATERIALS Bodies Acetal copolymer O-rings Nitrile rubber Collets Acetal copolymer with stainless steel teeth TUBE TOLERANCES Size 4 mm - 5 mm 6 mm - 12 mm 5/32-3/16 1/4-1/2 Tolerance mm to mm mm to mm to to Speedfit R THE PUSH-FIT SOLUTION FOR PLUMBING & HEATING SYSTEMS ARE ALSO AVAILABLE Speedfit 567

9 PNEUMATIC FITTINGS - METRIC STRAIGHT ADAPTOR WITH INTEGRAL SEAL MALE SUPER THREAD JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 3/ JGRM mm 1/ JGRM mm 3/ JGRM mm 1/ JGRM mm 3/ JGRM mm 1/ Thread can be used with BSP, BSPT, NPT, PF and PT STRAIGHT ADAPTOR MALE BSPP JGMM mm 1/8 BSPP 1.97 JGMM mm 1/8 BSPP 2.39 JGMM mm 1/4 BSPP 2.87 JGMM mm 1/4 BSPP 2.99 STRAIGHT ADAPTOR MALE METRIC THREAD JGRM0104M5 4 mm M JGRM0105M5 5 mm M JGRM0106M5 6 mm M STRAIGHT ADAPTOR MALE BSPP JGPM010411E 4 mm 1/8 BSPP 1.23 JGPM010412E 4 mm 1/4 BSPP 1.23 JGPM010511E 5 mm 1/8 BSPP 1.12 JGPM010512E 5 mm 1/4 BSPP 1.39 JGPM010611E 6 mm 1/8 BSPP 1.10 JGPM010612E 6 mm 1/4 BSPP 1.23 JGPM010811E 8 mm 1/8 BSPP 1.17 JGPM010812E 8 mm 1/4 BSPP 1.23 JGPM010813E 8 mm 3/8 BSPP 1.76 JGPM011012E 10 mm 1/4 BSPP 1.97 JGPM011013E 10 mm 3/8 BSPP 2.14 JGPM011014E 10 mm 1/2 BSPP 2.73 JGPM011213E 12 mm 3/8 BSPP 2.70 JGPM011214E 12 mm 1/2 BSPP 2.96 STRAIGHT ADAPTOR MALE BSPT JGPM010401E 4 mm 1/8 BSPT 0.84 JGPM010402E 4 mm 1/4 BSPT 1.17 JGPM010501E 5 mm 1/8 BSPT 0.90 JGPM010502E 5 mm 1/4 BSPT 1.17 JGPM010601E 6 mm 1/8 BSPT 1.06 JGPM010602E 6 mm 1/4 BSPT 1.17 JGPM010801E 8 mm 1/8 BSPT 1.15 JGPM010802E 8 mm 1/4 BSPT 1.17 JGPM010803E 8 mm 3/8 BSPT 1.51 JGPM011002E 10 mm 1/4 BSPT 1.86 JGPM011003E 10 mm 3/8 BSPT 2.00 JGPM011004E 10 mm 1/2 BSPT 2.58 JGPM011203E 12 mm 3/8 BSPT 2.55 JGPM011204E 12 mm 1/2 BSPT 2.80 EQUAL STRAIGHT CONNECTOR JGPM0404E 4 mm 1.31 JGPM0405E 5 mm 1.32 JGPM0406E 6 mm 1.39 JGPM0408E 8 mm 1.51 JGPM0410E 10 mm 1.98 JGPM0412E 12 mm 2.32 EQUAL STRAIGHT CONNECTOR JGRM0404E 4 mm 1.51 JGRM0405E 5 mm 1.54 JGRM0406E 6 mm 1.59 JGRM0408E 8 mm 1.80 JGRM0410E 10 mm 2.32 JGRM0412E 12 mm 2.70 EQUAL ELBOW JGPM0304E 4 mm 1.44 JGPM0305E 5 mm 1.45 JGPM0306E 6 mm 1.56 JGPM0308E 8 mm 1.83 JGPM0310E 10 mm 2.57 JGPM0312E 12 mm 3.06 EQUAL ELBOW JGRM0304E 4 mm 1.72 JGRM0305E 5 mm 1.73 JGRM0306E 6 mm 1.86 JGRM0308E 8 mm 2.13 JGRM0310E 10 mm 2.99 JGRM0312E 12 mm

10 PNEUMATIC FITTINGS - METRIC SWIVEL ELBOW c/w INTEGRAL SEAL MALE SUPERTHREAD JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 1/ JGRM mm 3/ JGRM mm 3/ JGRM mm 1/ Thread can be used with BSP, BSPT, NPT, PF and PT SWIVEL ELBOW MALE BSPP JGMM mm 1/8 BSPP 2.87 JGMM mm 1/8 BSPP 3.64 JGMM mm 1/4 BSPP 3.97 JGMM mm 1/4 BSPP 4.03 SWIVEL ELBOW MALE METRIC THREAD JGRM0904M5 4 mm M JGRM0906M5 6 mm M SWIVEL ELBOW MALE BSPP JGPM090411E 4 mm 1/8 BSPP 3.21 JGPM090412E 4 mm 1/4 BSPP 3.36 JGPM090511E 5 mm 1/8 BSPP 2.93 JGPM090512E 5 mm 1/4 BSPP 2.96 JGPM090611E 6 mm 1/8 BSPP 2.93 JGPM090612E 6 mm 1/4 BSPP 3.10 JGPM090811E 8 mm 1/8 BSPP 3.50 JGPM090812E 8 mm 1/4 BSPP 3.50 JGPM090813E 8 mm 3/8 BSPP 4.02 JGPM091012E 10 mm 1/4 BSPP 4.77 JGPM091013E 10 mm 3/8 BSPP 5.13 JGPM091014E 10 mm 1/2 BSPP 5.91 JGPM091213E 12 mm 3/8 BSPP 5.95 JGPM091214E 12 mm 1/2 BSPP 6.62 SWIVEL ELBOW MALE BSPT JGPM090401E 4 mm 1/8 BSPT 2.84 JGPM090402E 4 mm 1/4 BSPT 3.47 JGPM090501E 5 mm 1/8 BSPT 2.88 JGPM090502E 5 mm 1/4 BSPT 2.92 JGPM090601E 6 mm 1/8 BSPT 2.88 JGPM090602E 6 mm 1/4 BSPT 3.06 JGPM090801E 8 mm 1/8 BSPT 3.34 JGPM090802E 8 mm 1/4 BSPT 3.43 JGPM090803E 8 mm 3/8 BSPT 3.86 JGPM091002E 10 mm 1/4 BSPT 4.59 JGPM091003E 10 mm 3/8 BSPT 4.99 JGPM091004E 10 mm 1/2 BSPT 5.76 JGPM091203E 12 mm 3/8 BSPT 5.81 JGPM091204E 12 mm 1/2 BSPT 6.46 EQUAL TEE JGPM0204E 4 mm 2.10 JGPM0205E 5 mm 2.00 JGPM0206E 6 mm 2.10 JGPM0208E 8 mm 2.25 JGPM0210E 10 mm 2.71 JGPM0212E 12 mm 3.23 EQUAL TEE JGRM0204E 4 mm 2.25 JGRM0205E 5 mm 2.35 JGRM0206E 6 mm 2.46 JGRM0208E 8 mm 2.70 JGRM0210E 10 mm 3.10 JGRM0212E 12 mm

11 PNEUMATIC FITTINGS - METRIC SWIVEL TEE CENTRE LEG MALE BSPP JGPM100411E 4 mm 1/8 BSPP 4.28 JGPM100412E 4 mm 1/4 BSPP 4.16 JGPM100511E 5 mm 1/8 BSPP 4.21 JGPM100512E 5 mm 1/4 BSPP 4.30 JGPM100611E 6 mm 1/8 BSPP 3.62 JGPM100612E 6 mm 1/4 BSPP 3.77 JGPM100811E 8 mm 1/8 BSPP 4.06 JGPM100812E 8 mm 1/4 BSPP 4.11 JGPM100813E 8 mm 3/8 BSPP 4.77 JGPM101012E 10 mm 1/4 BSPP 5.06 JGPM101013E 10 mm 3/8 BSPP 6.27 JGPM101014E 10 mm 1/2 BSPP 6.32 JGPM101213E 12 mm 3/8 BSPP 6.48 JGPM101214E 12 mm 1/2 BSPP 7.14 SWIVEL TEE CENTRE LEG MALE BSPT JGPM100401E 4 mm 1/8 BSPT 3.45 JGPM100402E 4 mm 1/4 BSPT 3.58 JGPM100501E 5 mm 1/8 BSPT 3.64 JGPM100502E 5 mm 1/4 BSPT 3.67 JGPM100601E 6 mm 1/8 BSPT 4.16 JGPM100602E 6 mm 1/4 BSPT 3.67 JGPM100801E 8 mm 1/8 BSPT 3.97 JGPM100802E 8 mm 1/4 BSPT 4.06 JGPM100803E 8 mm 3/8 BSPT 4.62 JGPM101002E 10 mm 1/4 BSPT 5.99 JGPM101003E 10 mm 3/8 BSPT 5.29 JGPM101004E 10 mm 1/2 BSPT 6.05 JGPM101203E 12 mm 3/8 BSPT 7.21 JGPM101204E 12 mm 1/2 BSPT 6.99 SWIVEL RUN TEE MALE BSPP JGPM110411E 4 mm 1/8 BSPP 4.10 JGPM110412E 4 mm 1/4 BSPP 3.64 JGPM110511E 5 mm 1/8 BSPP 3.67 JGPM110512E 5 mm 1/4 BSPP 3.78 JGPM110611E 6 mm 1/8 BSPP 3.62 JGPM110612E 6 mm 1/4 BSPP 3.77 JGPM110811E 8 mm 1/8 BSPP 4.06 JGPM110812E 8 mm 1/4 BSPP 4.11 JGPM110813E 8 mm 3/8 BSPP 4.77 JGPM111012E 10 mm 1/4 BSPP 5.80 JGPM111013E 10 mm 3/8 BSPP 5.48 JGPM111014E 10 mm 1/2 BSPP 6.32 JGPM111213E 12 mm 3/8 BSPP 6.48 JGPM111214E 12 mm 1/2 BSPP 7.14 SWIVEL RUN TEE MALE BSPT JGPM110401E 4 mm 1/8 BSPT 3.45 JGPM110402E 4 mm 1/4 BSPT 3.58 JGPM110501E 5 mm 1/8 BSPT 3.64 JGPM110502E 5 mm 1/4 BSPT 3.67 JGPM110601E 6 mm 1/8 BSPT 4.16 JGPM110602E 6 mm 1/4 BSPT 4.21 JGPM110801E 8 mm 1/8 BSPT 4.54 JGPM110802E 8 mm 1/4 BSPT 4.66 JGPM110803E 8 mm 3/8 BSPT 4.62 JGPM111002E 10 mm 1/4 BSPT 4.99 JGPM111003E 10 mm 3/8 BSPT 6.05 JGPM111004E 10 mm 1/2 BSPT 6.05 JGPM111203E 12 mm 3/8 BSPT 6.32 JGPM111204E 12 mm 1/2 BSPT 6.99 STEM ADAPTOR MALE SUPERTHREAD STEM OD THREAD JGRM mm 1/ JGRM mm 1/ Thread can be used with BSP, BSPT, NPT, PF and PT Literature is available for guidance on installing John Guest fittings, tube and pipe. Please contact your distributor for more details. 570

12 PNEUMATIC FITTINGS - METRIC STEM ADAPTOR MALE BSP STEM OD THREAD JGPM050411E 4 mm 1/8 BSP 0.65 JGPM050412E 4 mm 1/4 BSP 0.63 JGPM050511E 5 mm 1/8 BSP 0.69 JGPM050512E 5 mm 1/4 BSP 0.76 JGPM050611E 6 mm 1/8 BSP 0.49 JGPM050612E 6 mm 1/4 BSP 0.57 JGPM050811E 8 mm 1/8 BSP 0.50 JGPM050812E 8 mm 1/4 BSP 0.57 JGPM050813E 8 mm 3/8 BSP 0.99 JGPM051012E 10 mm 1/4 BSP 0.71 JGPM051013E 10 mm 3/8 BSP 1.07 JGPM051014E 10 mm 1/2 BSP 1.48 JGPM051213E 12 mm 3/8 BSP 1.45 JGPM051214E 12 mm 1/2 BSP 1.62 STEM ADAPTOR MALE BSPT STEM OD THREAD JGPM050401E 4 mm 1/8 BSPT 0.49 JGPM050402E 4 mm 1/4 BSPT 0.50 JGPM050501E 5 mm 1/8 BSPT 0.49 JGPM050502E 5 mm 1/4 BSPT 0.50 JGPM050601E 6 mm 1/8 BSPT 0.49 JGPM050602E 6 mm 1/4 BSPT 0.50 JGPM050801E 8 mm 1/8 BSPT 0.49 JGPM050802E 8 mm 1/4 BSPT 0.50 JGPM050803E 8 mm 3/8 BSPT 0.79 JGPM051002E 10 mm 1/4 BSPT 0.63 JGPM051003E 10 mm 3/8 BSPT 0.79 JGPM051004E 10 mm 1/2 BSPT 1.32 JGPM051203E 12 mm 3/8 BSPT 0.93 JGPM051204E 12 mm 1/2 BSPT 1.32 BULKHEAD CONNECTOR JGPM1204E 4 mm 2.61 JGPM1205E 5 mm 2.54 JGPM1206E 6 mm 2.57 JGPM1208E 8 mm 2.70 JGPM1210E 10 mm 4.10 JGPM1212E 12 mm 5.69 BULKHEAD CONNECTOR JGRM mm 5.69 JGRM mm 5.83 BRASS BULKHEAD ADAPTOR JGRM mm 4.96 JGRM mm 6.14 FEMALE ADAPTOR - FLAT END FEMALE BSPP JGPM450411E 4 mm 1/8 BSPP 1.32 JGPM450611E 6 mm 1/8 BSPP 1.70 JGPM450612E 6 mm 1/4 BSPP 1.70 JGPM450812E 8 mm 1/4 BSPP 1.70 JGPM4508F4S 8 mm 7/16 x 20 UNF 2.14 JGPM4508C5S 8 mm 1/2-16 UNS 3.06 JGPM451015E 10 mm 5/8 BSPP 4.05 REDUCING STRAIGHT CONNECTOR TUBE OD TUBE OD JGPM200604E 6 mm 4 mm 1.54 JGPM200804E 8 mm 4 mm 1.54 JGPM200806E 8 mm 6 mm 1.61 JGPM201004E 10 mm 4 mm 1.91 JGPM201006E 10 mm 6 mm 1.89 JGPM201008E 10 mm 8 mm 1.72 JGPM201208E 12 mm 8 mm 2.32 JGPM201210E 12 mm 10 mm 2.71 REDUCER STEM OD TUBE OD JGPM060504E 5 mm 4 mm 0.90 JGPM060604E 6 mm 4 mm 0.95 JGPM060605E 6 mm 5 mm 0.99 JGPM060804E 8 mm 4 mm 1.13 JGPM060805E 8 mm 5 mm 1.13 JGPM060806E 8 mm 6 mm 1.15 JGPM061006E 10 mm 6 mm 1.20 JGPM061008E 10 mm 8 mm 1.40 JGPM061208E 12 mm 8 mm 1.54 JGPM061210E 12 mm 10 mm

13 PNEUMATIC FITTINGS - METRIC STEM ADAPTOR TUBE TO HOSE REDUCING ELBOW TUBE OD TUBE OD JGPM210604E 6 mm 4 mm 1.95 JGPM210804E 8 mm 4 mm 1.95 JGPM210806E 8 mm 6 mm 2.00 JGPM04E 10 mm 4 mm 2.71 JGPM06E 10 mm 6 mm 2.71 JGPM08E 10 mm 8 mm 2.71 JGPM211208E 12 mm 8 mm 2.70 JGPM211210E 12 mm 10 mm 2.80 STEM OD HOSE ID JGPM250604E 6 mm 4 mm 1.31 JGPM250806E 8 mm 6 mm 1.37 JGPM251008E 10 mm 8 mm 1.42 OFFSET CONNECTOR TUBE OD TUBE OD JGNC mm 8 mm 4.57 STEM ELBOW TUBE OD STEM OD JGPM220404E 4 mm 4 mm 1.44 JGPM220505E 5 mm 5 mm 1.48 JGPM220606E 6 mm 6 mm 1.48 JGPM220808E 8 mm 8 mm 1.83 JGPM221010E 10 mm 10 mm 2.58 JGPM221212E 12 mm 12 mm 3.07 SINGLE BANJO BODY MALE BSP JGRM150411E 4 mm 1/8 BSP 2.08 JGRM150511E 5 mm 1/8 BSP 2.15 JGRM150611E 6 mm 1/8 BSP 2.28 JGRM150812E 8 mm 1/4 BSP 2.44 JGRM151013E 10 mm 3/8 BSP 3.49 JGRM151214E 12 mm 1/2 BSP 4.20 ENLARGER TUBE OD TUBE OD JGPM130405E 5 mm 4 mm 1.62 SINGLE BANJO STEM MALE BSPP STEM THREAD JGRM1611 1/8 BSPP 4.40 JGRM1612 1/4 BSPP 5.85 JGRM1613 3/8 BSPP 8.26 JGRM1614 1/2 BSPP TWO-WAY DIVIDER JGRM2306E 6 mm 2.63 JGRM2308E 8 mm 2.63 JGRM2312E 12 mm 4.71 DOUBLE BANJO STEM MALE BSP STEM THREAD JGRM1711 1/8 BSP 5.49 JGRM1712 1/4 BSP 8.26 JGRM1713 3/8 BSP JGRM1714 1/2 BSP TWO-WAY DIVIDER COMPACT FITTING JGPM2304E 4 mm 2.11 JGPM2308E 8 mm 2.47 JGPM2310E 10 mm 2.99 PLUG JGPM0804R 4 mm 0.35 JGPM0805R 5 mm 0.36 JGPM0806R 6 mm 0.40 JGPM0808R 8 mm 0.46 JGPM0810R 10 mm 0.84 JGPM0812R 12 mm

14 PNEUMATIC FITTINGS - IMPERIAL STRAIGHT ADAPTOR MALE BSPT JGPM010401S 5/32 1/8 BSPT 0.91 JGPM010402S 5/32 1/4 BSPT 0.96 JGPI010601S 3/16 1/8 BSPT 0.96 JGPI010602S 3/16 1/4 BSPT 1.19 JGPI010801S 1/4 1/8 BSPT 1.07 JGPI010802S 1/4 1/4 BSPT 1.19 JGPM010801S 5/16 1/8 BSPT 1.21 JGPM010802S 5/16 1/4 BSPT 1.26 JGPM010803S 5/16 3/8 BSPT 1.60 JGPI011202S 3/8 1/4 BSPT 1.95 JGPI011203S 3/8 3/8 BSPT 2.07 JGPI011603S 1/2 3/8 BSPT 2.74 JGPI011604S 1/2 1/2 BSPT 3.02 STRAIGHT ADAPTOR MALE NPTF JGPM010421S 5/32 1/8 NPTF 0.91 JGPM010422S 5/32 1/4 NPTF 0.96 JGPI010621S 3/16 1/8 NPTF 0.96 JGPI010821S 1/4 1/8 NPTF 1.07 JGPI010822S 1/4 1/4 NPTF 1.19 JGPI010823S 1/4 3/8 NPTF 1.14 JGPM010821S 5/16 1/8 NPTF 1.21 JGPM010822S 5/16 1/4 NPTF 1.26 JGPM010823S 5/16 3/8 NPTF 1.60 JGPI011221S 3/8 1/8 NPTF 1.90 JGPI011222S 3/8 1/4 NPTF 1.95 JGPI011223S 3/8 3/8 NPTF 2.07 JGPI011224S 3/8 1/2 NPTF 2.74 JGPI011623S 1/2 3/8 NPTF 2.74 JGPI011624S 1/2 1/2 NPTF 3.02 JGPI012026S 5/8 3/4 NPTF 3.46 STRAIGHT ADAPTOR MALE BSPP JGPI010812S 1/4 1/4 BSPP 2.00 JGPI011212S 3/8 1/4 BSPP 2.18 EQUAL STRAIGHT ADAPTOR JGPM0404S 5/ JGPI0406S 3/ JGPI0408S 1/ JGPM0408S 5/ JGPI0412S 3/ JGPI0416S 1/ REDUCING STRAIGHT ADAPTOR TUBE OD TUBE OD JGPI200806S 1/4 3/ JGPM200804S 5/16 5/ JGPI201006S 5/16 3/ JGPI201008S 5/16 1/ JGPI201206S 3/8 3/ JGPI201208S 3/8 1/ JGPI201210S 3/8 5/ JGPI201610S 1/2 5/ JGPI201612S 1/2 3/ REDUCING TEE TUBE OD ENDS TUBE OD BRANCH JGPI301208S 3/8 1/ JGPI301612S 1/2 3/ EQUAL TEE JGPM0204S 5/ JGPI0206S 3/ JGPI0208S 1/ JGPM0208S 5/ JGPI0212S 3/ JGPI0216S 1/

15 PNEUMATIC FITTINGS - IMPERIAL EQUAL ELBOW JGPM0304S 5/ JGPI0306S 3/ JGPI0308S 1/ JGPM0308S 5/ JGPI0312S 3/ JGPI0316S 1/ STEM ELBOW JGPM220404S 5/ JGPI220606S 3/ JGPI220808S 1/ JGPM220808S 5/ JGPI221212S 3/ JGPI221616S 1/ SWIVEL ELBOW MALE BSPT JGPI090601S 3/16 1/8 BSPT 3.82 JGPI090801S 1/4 1/8 BSPT 4.28 JGPI090802S 1/4 1/4 BSPT 4.39 JGPM090801S 5/16 1/8 BSPT 4.52 JGPM090802S 5/16 1/4 BSPT 4.54 JGPM090803S 5/16 3/8 BSPT 4.69 JGPI091202S 3/8 1/4 BSPT 5.69 JGPI091203S 3/8 3/8 BSPT 6.15 JGPI091603S 1/2 3/8 BSPT 6.99 JGPI091604S 1/2 1/2 BSPT 7.04 SWIVEL ELBOW MALE NPTF JGPI090621S 3/16 1/8 NPTF 3.82 JGPI090821S 1/4 1/8 NPTF 4.28 JGPI090822S 1/4 1/4 NPTF 4.39 JGPM090821S 5/16 1/8 NPTF 5.14 JGPM090822S 5/16 1/4 NPTF 4.54 JGPM090823S 5/16 3/8 NPTF 5.34 JGPI091222S 3/8 1/4 NPTF 5.69 JGPI091223S 3/8 3/8 NPTF 6.15 JGPI091623S 1/2 3/8 NPTF 6.99 JGPI091624S 1/2 1/2 NPTF 7.04 STEM ADAPTOR MALE BSPT JGPI050601S 3/16 1/8 BSPT 0.94 JGPI050801S 1/4 1/8 BSPT 1.06 JGPI050802S 1/4 1/4 BSPT 1.09 JGPM050801S 5/16 1/8 BSPT 1.11 JGPM050802S 5/16 1/4 BSPT 1.13 JGPM050803S 5/16 3/8 BSPT 1.21 JGPI051202S 3/8 1/4 BSPT 1.14 JGPI051203S 3/8 3/8 BSPT 1.43 JGPI051603S 1/2 3/8 BSPT 1.46 JGPI051604S 1/2 1/2 BSPT 1.48 FEMALE ADAPTOR - FLAT END FEMALE BSP JGPI451014F 5/16 1/2 BSP 3.46 JGPI451015F 5/16 5/8 BSP 3.70 JGPI451213S 3/8 3/8 BSP 3.31 JGPI451214F 3/8 1/2 BSP 3.65 JGPI451215F 3/8 5/8 BSP 3.93 JGPI451613S 1/2 3/8 BSP 3.53 JGPI451615F 1/2 5/8 BSP 4.25 BULKHEAD CONNECTOR PLUG STEM OD JGPM0804S 5/ JGPI0806S 3/ JGPI0808S 1/ JGPM0808S 5/ JGPI0812S 3/ JGPI0816S 1/ JGPM1204S 5/ JGPI1206S 3/ JGPI1208S 1/ JGPM1208S 5/ JGPI1212S 3/ JGPI1216S 1/

16 PNEUMATIC FITTINGS - IMPERIAL STEM ADAPTOR TUBE TO HOSE STEM OD HOSE ID JGPI250806S 1/4 3/ JGPI250808S 1/4 1/ JGPI250810S 1/4 5/ JGPI251006S 5/16 3/ JGPI251008S 5/16 1/ JGPM250808S 5/16 5/ JGPI251012S 5/16 3/ JGPI251208S 3/8 1/ JGPI251210S 3/8 5/ JGPI251212S 3/8 3/ JGPI251216S 3/8 1/ JGPI251612S 1/2 3/ JGPI251616S 1/2 1/ ELBOW TUBE TO HOSE STEM OD HOSE ID JGPI290808S 1/4 1/ JGPI290810S 1/4 5/ JGPI291008S 5/16 1/ JGPM290808S 5/16 5/ JGPI291208S 3/8 1/ JGPI291210S 3/8 5/ TUBE INSERT TUBE ID JGTSI250S 1/ JGTSI312S 5/ JGTSI375S 3/ WAY DIVIDER TUBE OD INLET TUBE OD OUTLET JGPI491612S 1/2 3/ BANJO FLOW CONTROLS DESCRIPTION Banjo Flow Controls are designed for installation directly into cylinder ports to give precise control. They regulate the speed of pneumatic cylinders and other actuators. John Guest Controls provide a neat compact assembly which can be oriented to a suitable position for the circuit arrangement prior to tightening. The design offers especially precise adjustment through the control needle which is captive within its housing. Suitable for both soft metal and plastic tubing. ISO : 1991 SPECIFICATIONS Temperature range 5 C to 70 C Working pressure 0.5 bar to 10 bar Materials Acetal copolymer, brass, stainless steel and nitrile Filtration Air supply should be filtered to 50 micron BANJO FLOW CONTROL MALE BSP MANUAL ADJUSTMENT JGCFM3604M5 4 mm M JGCFM mm 1/8 BSP JGCFM mm 1/8 BSP JGCFM mm 1/4 BSP JGCFM mm 1/4 BSP BANJO FLOW CONTROL MALE BSP SCREWDRIVER SLOT JGLM1503M3E 3 mm M JGBFC3604M5 4 mm M JGBFC mm 1/8 BSP JGBFC mm 1/8 BSP JGBFC mm 1/4 BSP JGBFC mm 1/4 BSP JGBFC mm 3/8 BSP JGBFC mm 1/2 BSP

17 PNEUMATIC MINIATURE FITTINGS DESCRIPTION A new range of 4 mm fittings especially designed for miniature pneumatic applications. LM fittings are suitable for use with plastic (polyethylene, Nylon and Polyurethane) and soft metal (copper and mild steel) tubes with an outside diameter of 4 mm +0.05/ The tube to have a smooth outer surface and be free from burrs. Tube inserts should be used for soft or thin wall tubing or when using Polyurethane tube above 10 Bar to a maximum of 16 Bar. M3 and M5 threaded ends are designed to be hand tightened. MINIATURE STRAIGHT ADAPTOR MALE JGLM0103M3 3 mm M JGLM0104M3 4 mm M JGLM0104M5 4 mm M MINIATURE EQUAL ELBOW JGLM0303E 3 mm 2.07 JGLM0304E 4 mm 2.21 MINIATURE STRAIGHT ADAPTOR MALE SUPERTHREAD with integral seal JGLM mm 1/ MINIATURE EQUAL TEE JGLM0203E 3 mm 2.76 JGLM0204E 4 mm 2.98 MINIATURE STRAIGHT CONNECTOR JGLM0403E 3 mm 2.00 JGLM0404E 4 mm 2.13 MINIATURE SWIVEL ELBOW MALE JGLM0903M3 3 mm M JGLM0904M3 4 mm M JGLM0904M5 4 mm M BRASS MINIATURE TUBE INSERT TUBE OD X TUBE ID JGLMTS04 4 mm x 2.5 mm

18 PLUMBING AND HEATING FITTINGS BURST PRESSURE (FITTINGS) With copper or plastic pipe at 20 C: Speedfit fittings used with copper or Speedfit Barrier Pipe will withstand pressures well in excess of normal service conditions. HIGH TEMPERATURE Can withstand 114 C intermittently for short periods. The Speedfit System should not be used on an uncontrolled heat source. MAXIMUM TORGUE FIGURES (BSP & BSPT) Plastic threads are not generally as strong as brass threads. Customers should be aware of this when choosing products for their applications. Over tightening of plastic threads will cause undue stress and eventual cracking and leakage. The maximum torque figures for BSP and BSPT threads used on Speedfit plumbing products in mating threads conforming to relevant British or international threads standards. It is recommended that all installations are checked prior to use to determine that a seal has been made. STANDARDS APPLICATIONS Mains fed and indirect cold water systems Vented and unvented hot water systems Vented and sealed central heating systems IMPORTANT INFORMATION DO NOT USE FOR Gas, fuel, oil or compressed air applications WORKING TEMPERATURES AND PRESSURES Application Usual Working Temperature Max. Working Temperature Max. Working Pressure Cold water (indirect and direct main) 20 C 20 C 12 bar Central heating 82 C 105 C, short term Malfunction at 114 C 3 bar Hot water (including unvented cylinders) 65 C 95 C 6 bar MAXIMUM TORQUE (BSP & BSPT) Threads Size Maximum Torque Plastic 1/2 3.0 Nm 3/4 4.0 Nm Brass 1/2 4.0 Nm 3/4 5.0 Nm EQUAL STRAIGHT CONNECTOR JGPEM0410W 10 mm 2.32 JGPEM0415W 15 mm 1.73 JGPEM0422W 22 mm 2.70 JGPEM0428W 28 mm 6.84 REDUCING STRAIGHT COUPLER TUBE OD TUBE OD JGPEM mm 10 mm 4.04 JGPEM mm 15 mm 4.77 Suitable for central heating systems Suitable for central heating systems PE-COPPER COUPLER EQUAL ELBOW TUBE OD TUBE OD JGJG601B 20 mm 15 mm 7.43 JGJG603B 25 mm 15 mm JGJG602B 25 mm 22 mm 8.89 Suitable for cold water only JGPEM0310W 10 mm 2.85 JGPEM0315W 15 mm 2.04 JGPEM0322W 22 mm 3.26 JGPEM0328W 28 mm 7.98 Suitable for central heating systems STEM ELBOW STEM TEE TUBE OD TUBE OD JGPEM mm 10 mm 3.55 JGPEM mm 15 mm 4.00 JGPEM mm 22 mm 6.07 Suitable for central heating systems TUBE OD TUBE OD TUBE OD JGPEM mm 22 mm 10 mm 4.70 JGPEM mm 22 mm 15 mm 4.70 Suitable for central heating systems ADAPTOR FEMALE TAP ADAPTOR FEMALE JGCM011514S 15 mm 1/2 BSP 1.48 JGCM012216S 22 mm 3/4 BSP 2.20 JGCM321014E 10 mm 1/2 BSP

19 PLUMBING AND HEATING FITTINGS REDUCING TEE TUBE OD TUBE OD TUBE OD JGPEM3015BW 15 mm 10 mm 10 mm 4.95 JGPEM3015AW 15 mm 15 mm 10 mm 4.45 JGPEM3022CW 15 mm 15 mm 22 mm 4.95 JGPEM3022BW 22 mm 15 mm 15 mm 4.95 JGPEM3022DW 22 mm 15 mm 22 mm 4.95 JGPEM mm 22 mm 10 mm 4.95 JGPEM3022AW 22 mm 22 mm 15 mm 4.95 JGPEM3028BW 28 mm 22 mm 22 mm JGPEM3028AW 28 mm 28 mm 22 mm JGPEM3028DW 28 mm 22 mm 28 mm Suitable for central heating systems EQUAL TEE JGPEM0210W 10 mm 3.30 JGPEM0215W 15 mm 2.96 JGPEM0222W 22 mm 4.40 JGPEM0228W 28 mm Suitable for central heating systems BENT TAP CONNECTOR BSP FEMALE COUPLER TAP CONNECTOR FEMALE BSP JGPSE3210W 10 mm 1/2 BSP 3.25 JGPSE3201W 15 mm 1/2 BSP 1.89 JGPSE3203W 15 mm 3/4 BSP 4.14 JGPSE3202W 22 mm 3/4 BSP 2.84 PIPE INSERT FOR COMPRESSION FITTINGS JGTSM10N 10 mm 0.34 JGSTM15N 15 mm 0.34 JGSTM22N 22 mm 0.40 JGSTM28N 28 mm 0.63 JGPEMBTC mm 1/2 BSP 4.25 Suitable for central heating systems STRAIGHT TAP CONNECTOR BSP JGPEMSTC mm 1/2 BSP 3.37 JGPEMSTC mm 3/4 BSP 4.00 JGPEMSTC mm 3/4 BSP 4.41 Suitable for central heating systems STOP END JGPSE4610W 10 mm 2.26 JGPSE4615W 15 mm 2.32 JGPSE4622W 22 mm 2.82 Suitable for central heating systems REDUCER TUBE OD TUBE OD JGPEM mm 10 mm 1.99 JGPEM mm 15 mm 2.58 JGPEM mm 15 mm 5.33 JGPEM mm 22 mm 5.80 Suitable for central heating systems PIPE INSERT SUPERSEAL JGSTS10 10 mm 0.37 JGSTS15 15 mm 0.37 JGSTS22 22 mm 0.45 JGSTS28 28 mm 0.75 TANK CONNECTOR JGCM0715S 15 mm 2.88 JGCM0722S 22 mm 3.69 JGCM0728S 28 mm Suitable for cold water tanks only Requires hand tightening only PLUG JGPL10 10 mm 0.90 JGPL15 15 mm 1.02 JGPL22 22 mm 1.14 JGPL28 28 mm 1.78 Suitable for central heating systems 578

20 VALVES SUITABLE FOR CENTRAL HEATING SYSTEMS DESCRIPTION Speedfit Drain Cocks cannot be used where collet covers are fitted. They can be used with a standard fitting with a collet clip. Please Note: A collet cover cannot be used on a Speedfit end assembly with a drain cock. BRASS STOP VALVE BODY AND HEAD DZR BRASS JG15BSC 15 mm BRASS DRAIN COCK DZR BRASS JG15BDC 15 mm 7.85 BRASS SERVICE VALVE JG15HSV-BRA 15 mm SERVICE VALVE WITH TAP CONNECTOR BSP BRASS CHROME PLATED JG15PTSV 15 mm 1/2 BSP JG22PTSV 22 mm 3/4 BSP SERVICE VALVE BRASS CHROME PLATED JG10HSV 10 mm JG15HSV 15 mm JG22HSV 22 mm BALL VALVE BRASS CHROME PLATED JG10BV 10 mm JG15BV 15 mm JG22BV 22 mm Each valve has a red and blue indice JG Manifolds also available. For more information please contact our technical sales team 579

21 VALVES NOT SUITABLE FOR CENTRAL HEATING SYSTEMS WASHING MACHINE TAP BSP JG15APT 15 mm 3/4 BSP 5.67 Hot and cold water only, 65 C maximum EMERGENCY SHUT OFF TAP JG15ESOT 15 mm 6.26 Hot and cold water only, 65 C maximum PLASTIC SERVICE VALVE JG15SV 15 mm 6.65 JG22SV 22 mm Hot and cold water only, 65 C maximum DOUBLE CHECK VALVE JG15DCV 15 mm Hot and cold water only, 65 C maximum SINGLE CHECK VALVE JG10SCV 10 mm JG12SCV 12 mm SINGLE CHECK VALVE IMPERIAL JG38SCV 3/ SHUT OFF VALVE LONG HANDLE JGPISV0412S 3/ SHUT OFF VALVE LONG HANDLE WITH MOUNTING CLIP JGPISV04KIT 3/ STOP VALVE JG15STV 15 mm 8.25 JG22STV 22 mm Hot and cold water only, 65 C maximum 580

22 FLEXI HOSE AND BARRIER PIPE FLEXI HOSE FEMALE BSP 300 MM LENGTH JGFLX34 10 mm 1/2 BSP 6.77 JGFLX35 15 mm 3/8 BSP 6.77 JGFLX15 15 mm 1/2 BSP 6.12 JGFLX16 15 mm 3/4 BSP 7.73 JGFLX22 22 mm 3/4 BSP 8.40 Not suitable for central heating systems FLEXI HOSE FEMALE BSP 500 MM LENGTH JGFLX18 15 mm 1/2 BSP 8.86 JGFLX20 15 mm 3/4 BSP JGFLX19 22 mm 3/4 BSP JGFLX23 22 mm 3/4 BSP *Full Bore. Not suitable for central heating systems FLEXI HOSE 300 MM LENGTH TUBE OD TUBE OD JGFLX33 15 mm 10 mm 5.22 JGFLX17 15 mm 15 mm 7.58 JGFLX26 22 mm 22 mm 9.29 Not suitable for central heating systems Hot and cold water only, 65ºC maximum FLEXI HOSE 500 MM LENGTH TUBE OD TUBE OD JGFLX21 15 mm 15 mm JGFLX27 22 mm 22 mm Not suitable for central heating systems Hot and cold water only, 65ºC maximum FLEXI HOSE WITH SERVICE VALVE FEMALE BSP 300 MM LENGTH JGFLX24 15 mm 1/2 BSP JGFLX37** 15 mm 1/2 BSP JGFLX25* 22 mm 3/4 BSP *Full Bore **Plastic valve with handle Not suitable for central heating systems FLEXI HOSE WITH SERVICE VALVE FEMALE BSP 500 MM LENGTH JGFLX31 15 mm 1/2 BSP JGFLX38 15 mm 3/4 BSP JGFLX32 22 mm 3/4 BSP *Full Bore Not suitable for central heating systems FLEXI HOSE FOR MONOBLOCK MIXERS MALE MM LENGTH JGFLX29 15 mm M Not suitable for central heating systems Hot and cold water only, 65ºC maximum. Price per pair. FLEXI HOSE ELBOW PATTERN FEMALE MM LENGTH JGFLX36 15 mm 1/2 BSP 8.19 Not suitable for central heating systems Hot and cold water only, 65ºC maximum SPEEDFIT BARRIER PIPE TUBE OD COIL LENGTH JG10BPEX mm 25 mtr JG10BPEX mm 50 mtr JG10BPEX mm 100 mtr JG15BPEX mm 25 mtr JG15BPEX mm 50 mtr JG15BPEX mm 100 mtr JG15BPEX mm 120 mtr JG15BPEX mm 150 mtr JG22BPEX mm 25 mtr JG22BPEX mm 50 mtr Suitable for central heating systems Price per coil. The pipe has an inner barrier to stop the ingress of atmosphere SPEEDFIT BARRIER PIPE TUBE OD STRAIGHT LENGTH JG15BPEX-2L 15 mm 2 mtr 3.52 JG15BPEX-3L 15 mm 3 mtr 5.28 JG15BPEX-6L 15 mm 6 mtr JG22BPEX-2L 22 mm 2 mtr 6.90 JG22BPEX-3L 22 mm 3 mtr JG22BPEX-6L 22 mm 6 mtr JG28BPEX-3L 28 mm 3 mtr Suitable for central heating systems Price per length. The pipe has an inner barrier to stop the ingress of atmosphere 581

23 LLDPE TUBE SUITABILITY Water purification Water conditioners Ice makers Misting systems SPECIFICATIONS Maximum temperature Pressure rating Construction FEATURES / BENEFITS WRAS approved product FDA approved NSF 51& 61 Strong Good flexibility Broad chemical compatibility -35 C to +55 C Values given are based on the short term burst pressure of JGPE hose at 20ºC using a 3:1 safety factor. Note any increase in temperature above 20ºC will result in a decline in working pressure values. Linear low density polyethylene SUPPLIED IN FULL COILS ONLY LLDPE TUBE METRIC JGPE - NATURAL 100 METRE COILS JGPE - BLACK 100 METRE COILS per coil JGPE04025N JGPE0604N JGPE0806N JGPE1007N JGPE1209N per coil JGPE04025E JGPE0604E JGPE0806E JGPE1007E JGPE1209E JGPE - RED 100 METRE COILS JGPE - GREEN 100 METRE COILS JGPE04025R JGPE0604R JGPE0806R JGPE1007R JGPE1209R JGPE1512R per coil JGPE0806G JGPE1512G JGPE - YELLOW 100 METRE COILS JGPE - BLUE 100 METRE COILS per coil JGPE0604Y JGPE04025B JGPE0604B JGPE0806B JGPE1007B JGPE1209B JGPE1512B JGPE - WHITE 100 METRE COILS per coil JGPE0425W JGPE0604W JGPE0806W

24 LLDPE TUBE SUITABILITY Water purification Water conditioners Ice makers Misting systems SPECIFICATIONS Maximum temperature Pressure rating Construction FEATURES / BENEFITS WRAS approved product FDA approved NSF 51& 61 Strong Good flexibility Broad chemical compatibility -35 C to +55 C Values given are based on the short term burst pressure of JGPE hose at 20ºC using a 3:1 safety factor. Note any increase in temperature above 20ºC will result in a decline in working pressure values. Linear low density polyethylene SUPPLIED IN FULL COILS ONLY LLDPE TUBE IMPERIAL JGPE - NATURAL 500 FT. COILS JGPE - BLACK 500 FT. COILS per coil JGPE1/4N 1/ JGPE5/16N 5/ JGPE3/8N 3/ FT. COILS JGPE1/2N 1/ per coil JGPE1/4E 1/ JGPE5/16E 5/ JGPE3/8E 3/8 0, FT. COILS JGPE1/2E 1/ JGPE - RED 500 FT. COILS JGPE - GREEN 500 FT. COILS per coil JGPE1/4R 1/ JGPE5/16R 5/ JGPE3/8R 3/ FT. COILS JGPE1/2R 1/ JGPE - BLUE 500 FT. COILS per coil JGPE1/4B 1/ JGPE5/16B 5/ JGPE3/8B 3/ FT. COILS JGPE1/2B 1/ per coil JGPE1/4G 1/ JGPE3/8G 3/ JGPE - YELLOW 500 FT. COILS per coil JGPE1/4Y 1/ JGPE3/8Y 3/ JGPE - WHITE 500 FT. COILS per coil JGPE1/4W 1/ JGPE5/16W 5/ JGPE3/8W 3/ FT. COILS JGPE1/2W 1/